/* end of cleanup sequence */
        for (timeout = 12000; timeout > 0 && (inb(AD1848P(chip, REGSEL)) & AD1848_INIT); timeout--)
                udelay(100);
-#if 0
-       printk("(1) timeout = %i\n", timeout);
-#endif
+
+       snd_printdd("(1) timeout = %d\n", timeout);
+
 #ifdef CONFIG_SND_DEBUG
        if (inb(AD1848P(chip, REGSEL)) & AD1848_INIT)
                snd_printk(KERN_WARNING "mce_down [0x%lx] - auto calibration time out (0)\n", AD1848P(chip, REGSEL));
 #endif
+
        chip->mce_bit &= ~AD1848_MCE;
        timeout = inb(AD1848P(chip, REGSEL));
        outb(chip->mce_bit | (timeout & 0x1f), AD1848P(chip, REGSEL));
         * which at the slowest possible rate of 5.5125 kHz means 907 us.
         */
        msleep(1);
-#if 0
-       printk("(2) jiffies = %li\n", jiffies);
-#endif
+
+       snd_printdd("(2) jiffies = %lu\n", jiffies);
+
        time = msecs_to_jiffies(250);
        while (snd_ad1848_in(chip, AD1848_TEST_INIT) & AD1848_CALIB_IN_PROGRESS) {
                spin_unlock_irqrestore(&chip->reg_lock, flags);
                time = schedule_timeout(time);
                spin_lock_irqsave(&chip->reg_lock, flags);
        }
-#if 0
-       printk("(3) jiffies = %li\n", jiffies);
-#endif
+
+       snd_printdd("(3) jiffies = %lu\n", jiffies);
+
        time = msecs_to_jiffies(100);
        while (inb(AD1848P(chip, REGSEL)) & AD1848_INIT) {
                spin_unlock_irqrestore(&chip->reg_lock, flags);
                spin_lock_irqsave(&chip->reg_lock, flags);
        }
        spin_unlock_irqrestore(&chip->reg_lock, flags);
-#if 0
-       printk("(4) jiffies = %li\n", jiffies);
-       snd_printk("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL)));
-#endif
+
+       snd_printdd("(4) jiffies = %lu\n", jiffies);
+       snd_printd("mce_down - exit = 0x%x\n", inb(AD1848P(chip, REGSEL)));
 }
 
 static unsigned int snd_ad1848_get_count(unsigned char format,
 
        int timeout;
 
        snd_cs4231_busy_wait(chip);
-#if 0
-       printk("(1) timeout = %i\n", timeout);
-#endif
+
 #ifdef CONFIG_SND_DEBUG
        if (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT)
                snd_printk("mce_down [0x%lx] - auto calibration time out (0)\n", (long)CS4231P(REGSEL));
         * which at the slowest possible rate of 5.5125 kHz means 907 us.
         */
        msleep(1);
-#if 0
-       printk("(2) jiffies = %li\n", jiffies);
-#endif
+
+       snd_printdd("(1) jiffies = %lu\n", jiffies);
+
        /* in 10 ms increments, check condition, up to 250 ms */
        timeout = 25;
        while (snd_cs4231_in(chip, CS4231_TEST_INIT) & CS4231_CALIB_IN_PROGRESS) {
                }
                msleep(10);
        }
-#if 0
-       printk("(3) jiffies = %li\n", jiffies);
-#endif
+
+       snd_printdd("(2) jiffies = %lu\n", jiffies);
+
        /* in 10 ms increments, check condition, up to 100 ms */
        timeout = 10;
        while (cs4231_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) {
                }
                msleep(10);
        }
-#if 0
-       printk("(4) jiffies = %li\n", jiffies);
-       snd_printk("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL)));
-#endif
+
+       snd_printdd("(3) jiffies = %lu\n", jiffies);
+       snd_printd("mce_down - exit = 0x%x\n", cs4231_inb(chip, CS4231P(REGSEL)));
 }
 
 static unsigned int snd_cs4231_get_count(unsigned char format, unsigned int size)