+What: /sys/bus/pci/drivers/.../bind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause
+ the driver to attempt to bind to the device found at
+ this location. This is useful for overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../unbind
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device location to this file will cause the
+ driver to attempt to unbind from the device found at
+ this location. This may be useful when overriding default
+ bindings. The format for the location is: DDDD:BB:DD.F.
+ That is Domain:Bus:Device.Function and is the same as
+ found in /sys/bus/pci/devices/. For example:
+ # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+ (Note: kernels before 2.6.28 may require echo -n).
+
+What: /sys/bus/pci/drivers/.../new_id
+Date: December 2003
+Contact: linux-pci@vger.kernel.org
+Description:
+ Writing a device ID to this file will attempt to
+ dynamically add a new device ID to a PCI device driver.
+ This may allow the driver to support more hardware than
+ was included in the driver's static device ID support
+ table at compile time. The format for the device ID is:
+ VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID,
+ Device ID, Subsystem Vendor ID, Subsystem Device ID,
+ Class, Class Mask, and Private Driver Data. The Vendor ID
+ and Device ID fields are required, the rest are optional.
+ Upon successfully adding an ID, the driver will probe
+ for the device and attempt to bind to it. For example:
+ # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
What: /sys/bus/pci/devices/.../vpd
Date: February 2008
Contact: Ben Hutchings <bhutchings@solarflare.com>
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
-DOCBOOKS := z8530book.xml mcabook.xml \
+DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="LinuxDriversAPI">
+ <bookinfo>
+ <title>Linux Device Drivers</title>
+
+ <legalnotice>
+ <para>
+ This documentation is free software; you can redistribute
+ it and/or modify it under the terms of the GNU General Public
+ License as published by the Free Software Foundation; either
+ version 2 of the License, or (at your option) any later
+ version.
+ </para>
+
+ <para>
+ This program is distributed in the hope that it will be
+ useful, but WITHOUT ANY WARRANTY; without even the implied
+ warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
+ </para>
+
+ <para>
+ You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ MA 02111-1307 USA
+ </para>
+
+ <para>
+ For more details see the file COPYING in the source
+ distribution of Linux.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <chapter id="Basics">
+ <title>Driver Basics</title>
+ <sect1><title>Driver Entry and Exit points</title>
+!Iinclude/linux/init.h
+ </sect1>
+
+ <sect1><title>Atomic and pointer manipulation</title>
+!Iarch/x86/include/asm/atomic_32.h
+!Iarch/x86/include/asm/unaligned.h
+ </sect1>
+
+ <sect1><title>Delaying, scheduling, and timer routines</title>
+!Iinclude/linux/sched.h
+!Ekernel/sched.c
+!Ekernel/timer.c
+ </sect1>
+ <sect1><title>High-resolution timers</title>
+!Iinclude/linux/ktime.h
+!Iinclude/linux/hrtimer.h
+!Ekernel/hrtimer.c
+ </sect1>
+ <sect1><title>Workqueues and Kevents</title>
+!Ekernel/workqueue.c
+ </sect1>
+ <sect1><title>Internal Functions</title>
+!Ikernel/exit.c
+!Ikernel/signal.c
+!Iinclude/linux/kthread.h
+!Ekernel/kthread.c
+ </sect1>
+
+ <sect1><title>Kernel objects manipulation</title>
+<!--
+X!Iinclude/linux/kobject.h
+-->
+!Elib/kobject.c
+ </sect1>
+
+ <sect1><title>Kernel utility functions</title>
+!Iinclude/linux/kernel.h
+!Ekernel/printk.c
+!Ekernel/panic.c
+!Ekernel/sys.c
+!Ekernel/rcupdate.c
+ </sect1>
+
+ <sect1><title>Device Resource Management</title>
+!Edrivers/base/devres.c
+ </sect1>
+
+ </chapter>
+
+ <chapter id="devdrivers">
+ <title>Device drivers infrastructure</title>
+ <sect1><title>Device Drivers Base</title>
+<!--
+X!Iinclude/linux/device.h
+-->
+!Edrivers/base/driver.c
+!Edrivers/base/core.c
+!Edrivers/base/class.c
+!Edrivers/base/firmware_class.c
+!Edrivers/base/transport_class.c
+<!-- Cannot be included, because
+ attribute_container_add_class_device_adapter
+ and attribute_container_classdev_to_container
+ exceed allowed 44 characters maximum
+X!Edrivers/base/attribute_container.c
+-->
+!Edrivers/base/sys.c
+<!--
+X!Edrivers/base/interface.c
+-->
+!Edrivers/base/platform.c
+!Edrivers/base/bus.c
+ </sect1>
+ <sect1><title>Device Drivers Power Management</title>
+!Edrivers/base/power/main.c
+ </sect1>
+ <sect1><title>Device Drivers ACPI Support</title>
+<!-- Internal functions only
+X!Edrivers/acpi/sleep/main.c
+X!Edrivers/acpi/sleep/wakeup.c
+X!Edrivers/acpi/motherboard.c
+X!Edrivers/acpi/bus.c
+-->
+!Edrivers/acpi/scan.c
+!Idrivers/acpi/scan.c
+<!-- No correct structured comments
+X!Edrivers/acpi/pci_bind.c
+-->
+ </sect1>
+ <sect1><title>Device drivers PnP support</title>
+!Idrivers/pnp/core.c
+<!-- No correct structured comments
+X!Edrivers/pnp/system.c
+ -->
+!Edrivers/pnp/card.c
+!Idrivers/pnp/driver.c
+!Edrivers/pnp/manager.c
+!Edrivers/pnp/support.c
+ </sect1>
+ <sect1><title>Userspace IO devices</title>
+!Edrivers/uio/uio.c
+!Iinclude/linux/uio_driver.h
+ </sect1>
+ </chapter>
+
+ <chapter id="parportdev">
+ <title>Parallel Port Devices</title>
+!Iinclude/linux/parport.h
+!Edrivers/parport/ieee1284.c
+!Edrivers/parport/share.c
+!Idrivers/parport/daisy.c
+ </chapter>
+
+ <chapter id="message_devices">
+ <title>Message-based devices</title>
+ <sect1><title>Fusion message devices</title>
+!Edrivers/message/fusion/mptbase.c
+!Idrivers/message/fusion/mptbase.c
+!Edrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptscsih.c
+!Idrivers/message/fusion/mptctl.c
+!Idrivers/message/fusion/mptspi.c
+!Idrivers/message/fusion/mptfc.c
+!Idrivers/message/fusion/mptlan.c
+ </sect1>
+ <sect1><title>I2O message devices</title>
+!Iinclude/linux/i2o.h
+!Idrivers/message/i2o/core.h
+!Edrivers/message/i2o/iop.c
+!Idrivers/message/i2o/iop.c
+!Idrivers/message/i2o/config-osm.c
+!Edrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/exec-osm.c
+!Idrivers/message/i2o/bus-osm.c
+!Edrivers/message/i2o/device.c
+!Idrivers/message/i2o/device.c
+!Idrivers/message/i2o/driver.c
+!Idrivers/message/i2o/pci.c
+!Idrivers/message/i2o/i2o_block.c
+!Idrivers/message/i2o/i2o_scsi.c
+!Idrivers/message/i2o/i2o_proc.c
+ </sect1>
+ </chapter>
+
+ <chapter id="snddev">
+ <title>Sound Devices</title>
+!Iinclude/sound/core.h
+!Esound/sound_core.c
+!Iinclude/sound/pcm.h
+!Esound/core/pcm.c
+!Esound/core/device.c
+!Esound/core/info.c
+!Esound/core/rawmidi.c
+!Esound/core/sound.c
+!Esound/core/memory.c
+!Esound/core/pcm_memory.c
+!Esound/core/init.c
+!Esound/core/isadma.c
+!Esound/core/control.c
+!Esound/core/pcm_lib.c
+!Esound/core/hwdep.c
+!Esound/core/pcm_native.c
+!Esound/core/memalloc.c
+<!-- FIXME: Removed for now since no structured comments in source
+X!Isound/sound_firmware.c
+-->
+ </chapter>
+
+ <chapter id="uart16x50">
+ <title>16x50 UART Driver</title>
+!Iinclude/linux/serial_core.h
+!Edrivers/serial/serial_core.c
+!Edrivers/serial/8250.c
+ </chapter>
+
+ <chapter id="fbdev">
+ <title>Frame Buffer Library</title>
+
+ <para>
+ The frame buffer drivers depend heavily on four data structures.
+ These structures are declared in include/linux/fb.h. They are
+ fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
+ The last three can be made available to and from userland.
+ </para>
+
+ <para>
+ fb_info defines the current state of a particular video card.
+ Inside fb_info, there exists a fb_ops structure which is a
+ collection of needed functions to make fbdev and fbcon work.
+ fb_info is only visible to the kernel.
+ </para>
+
+ <para>
+ fb_var_screeninfo is used to describe the features of a video card
+ that are user defined. With fb_var_screeninfo, things such as
+ depth and the resolution may be defined.
+ </para>
+
+ <para>
+ The next structure is fb_fix_screeninfo. This defines the
+ properties of a card that are created when a mode is set and can't
+ be changed otherwise. A good example of this is the start of the
+ frame buffer memory. This "locks" the address of the frame buffer
+ memory, so that it cannot be changed or moved.
+ </para>
+
+ <para>
+ The last structure is fb_monospecs. In the old API, there was
+ little importance for fb_monospecs. This allowed for forbidden things
+ such as setting a mode of 800x600 on a fix frequency monitor. With
+ the new API, fb_monospecs prevents such things, and if used
+ correctly, can prevent a monitor from being cooked. fb_monospecs
+ will not be useful until kernels 2.5.x.
+ </para>
+
+ <sect1><title>Frame Buffer Memory</title>
+!Edrivers/video/fbmem.c
+ </sect1>
+<!--
+ <sect1><title>Frame Buffer Console</title>
+X!Edrivers/video/console/fbcon.c
+ </sect1>
+-->
+ <sect1><title>Frame Buffer Colormap</title>
+!Edrivers/video/fbcmap.c
+ </sect1>
+<!-- FIXME:
+ drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
+ out until somebody adds docs. KAO
+ <sect1><title>Frame Buffer Generic Functions</title>
+X!Idrivers/video/fbgen.c
+ </sect1>
+KAO -->
+ <sect1><title>Frame Buffer Video Mode Database</title>
+!Idrivers/video/modedb.c
+!Edrivers/video/modedb.c
+ </sect1>
+ <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
+!Edrivers/video/macmodes.c
+ </sect1>
+ <sect1><title>Frame Buffer Fonts</title>
+ <para>
+ Refer to the file drivers/video/console/fonts.c for more information.
+ </para>
+<!-- FIXME: Removed for now since no structured comments in source
+X!Idrivers/video/console/fonts.c
+-->
+ </sect1>
+ </chapter>
+
+ <chapter id="input_subsystem">
+ <title>Input Subsystem</title>
+!Iinclude/linux/input.h
+!Edrivers/input/input.c
+!Edrivers/input/ff-core.c
+!Edrivers/input/ff-memless.c
+ </chapter>
+
+ <chapter id="spi">
+ <title>Serial Peripheral Interface (SPI)</title>
+ <para>
+ SPI is the "Serial Peripheral Interface", widely used with
+ embedded systems because it is a simple and efficient
+ interface: basically a multiplexed shift register.
+ Its three signal wires hold a clock (SCK, often in the range
+ of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
+ a "Master In, Slave Out" (MISO) data line.
+ SPI is a full duplex protocol; for each bit shifted out the
+ MOSI line (one per clock) another is shifted in on the MISO line.
+ Those bits are assembled into words of various sizes on the
+ way to and from system memory.
+ An additional chipselect line is usually active-low (nCS);
+ four signals are normally used for each peripheral, plus
+ sometimes an interrupt.
+ </para>
+ <para>
+ The SPI bus facilities listed here provide a generalized
+ interface to declare SPI busses and devices, manage them
+ according to the standard Linux driver model, and perform
+ input/output operations.
+ At this time, only "master" side interfaces are supported,
+ where Linux talks to SPI peripherals and does not implement
+ such a peripheral itself.
+ (Interfaces to support implementing SPI slaves would
+ necessarily look different.)
+ </para>
+ <para>
+ The programming interface is structured around two kinds of driver,
+ and two kinds of device.
+ A "Controller Driver" abstracts the controller hardware, which may
+ be as simple as a set of GPIO pins or as complex as a pair of FIFOs
+ connected to dual DMA engines on the other side of the SPI shift
+ register (maximizing throughput). Such drivers bridge between
+ whatever bus they sit on (often the platform bus) and SPI, and
+ expose the SPI side of their device as a
+ <structname>struct spi_master</structname>.
+ SPI devices are children of that master, represented as a
+ <structname>struct spi_device</structname> and manufactured from
+ <structname>struct spi_board_info</structname> descriptors which
+ are usually provided by board-specific initialization code.
+ A <structname>struct spi_driver</structname> is called a
+ "Protocol Driver", and is bound to a spi_device using normal
+ driver model calls.
+ </para>
+ <para>
+ The I/O model is a set of queued messages. Protocol drivers
+ submit one or more <structname>struct spi_message</structname>
+ objects, which are processed and completed asynchronously.
+ (There are synchronous wrappers, however.) Messages are
+ built from one or more <structname>struct spi_transfer</structname>
+ objects, each of which wraps a full duplex SPI transfer.
+ A variety of protocol tweaking options are needed, because
+ different chips adopt very different policies for how they
+ use the bits transferred with SPI.
+ </para>
+!Iinclude/linux/spi/spi.h
+!Fdrivers/spi/spi.c spi_register_board_info
+!Edrivers/spi/spi.c
+ </chapter>
+
+ <chapter id="i2c">
+ <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+ <para>
+ I<superscript>2</superscript>C (or without fancy typography, "I2C")
+ is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+ widely used where low data rate communications suffice.
+ Since it's also a licensed trademark, some vendors use another
+ name (such as "Two-Wire Interface", TWI) for the same bus.
+ I2C only needs two signals (SCL for clock, SDA for data), conserving
+ board real estate and minimizing signal quality issues.
+ Most I2C devices use seven bit addresses, and bus speeds of up
+ to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+ found wide use.
+ I2C is a multi-master bus; open drain signaling is used to
+ arbitrate between masters, as well as to handshake and to
+ synchronize clocks from slower clients.
+ </para>
+
+ <para>
+ The Linux I2C programming interfaces support only the master
+ side of bus interactions, not the slave side.
+ The programming interface is structured around two kinds of driver,
+ and two kinds of device.
+ An I2C "Adapter Driver" abstracts the controller hardware; it binds
+ to a physical device (perhaps a PCI device or platform_device) and
+ exposes a <structname>struct i2c_adapter</structname> representing
+ each I2C bus segment it manages.
+ On each I2C bus segment will be I2C devices represented by a
+ <structname>struct i2c_client</structname>. Those devices will
+ be bound to a <structname>struct i2c_driver</structname>,
+ which should follow the standard Linux driver model.
+ (At this writing, a legacy model is more widely used.)
+ There are functions to perform various I2C protocol operations; at
+ this writing all such functions are usable only from task context.
+ </para>
+
+ <para>
+ The System Management Bus (SMBus) is a sibling protocol. Most SMBus
+ systems are also I2C conformant. The electrical constraints are
+ tighter for SMBus, and it standardizes particular protocol messages
+ and idioms. Controllers that support I2C can also support most
+ SMBus operations, but SMBus controllers don't support all the protocol
+ options that an I2C controller will.
+ There are functions to perform various SMBus protocol operations,
+ either using I2C primitives or by issuing SMBus commands to
+ i2c_adapter devices which don't support those I2C operations.
+ </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+ </chapter>
+
+</book>
<toc></toc>
- <chapter id="Basics">
- <title>Driver Basics</title>
- <sect1><title>Driver Entry and Exit points</title>
-!Iinclude/linux/init.h
- </sect1>
-
- <sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
-!Iarch/x86/include/asm/unaligned.h
- </sect1>
-
- <sect1><title>Delaying, scheduling, and timer routines</title>
-!Iinclude/linux/sched.h
-!Ekernel/sched.c
-!Ekernel/timer.c
- </sect1>
- <sect1><title>High-resolution timers</title>
-!Iinclude/linux/ktime.h
-!Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
- </sect1>
- <sect1><title>Workqueues and Kevents</title>
-!Ekernel/workqueue.c
- </sect1>
- <sect1><title>Internal Functions</title>
-!Ikernel/exit.c
-!Ikernel/signal.c
-!Iinclude/linux/kthread.h
-!Ekernel/kthread.c
- </sect1>
-
- <sect1><title>Kernel objects manipulation</title>
-<!--
-X!Iinclude/linux/kobject.h
--->
-!Elib/kobject.c
- </sect1>
-
- <sect1><title>Kernel utility functions</title>
-!Iinclude/linux/kernel.h
-!Ekernel/printk.c
-!Ekernel/panic.c
-!Ekernel/sys.c
-!Ekernel/rcupdate.c
- </sect1>
-
- <sect1><title>Device Resource Management</title>
-!Edrivers/base/devres.c
- </sect1>
-
- </chapter>
-
<chapter id="adt">
<title>Data Types</title>
<sect1><title>Doubly Linked Lists</title>
!Ikernel/acct.c
</chapter>
- <chapter id="devdrivers">
- <title>Device drivers infrastructure</title>
- <sect1><title>Device Drivers Base</title>
-<!--
-X!Iinclude/linux/device.h
--->
-!Edrivers/base/driver.c
-!Edrivers/base/core.c
-!Edrivers/base/class.c
-!Edrivers/base/firmware_class.c
-!Edrivers/base/transport_class.c
-<!-- Cannot be included, because
- attribute_container_add_class_device_adapter
- and attribute_container_classdev_to_container
- exceed allowed 44 characters maximum
-X!Edrivers/base/attribute_container.c
--->
-!Edrivers/base/sys.c
-<!--
-X!Edrivers/base/interface.c
--->
-!Edrivers/base/platform.c
-!Edrivers/base/bus.c
- </sect1>
- <sect1><title>Device Drivers Power Management</title>
-!Edrivers/base/power/main.c
- </sect1>
- <sect1><title>Device Drivers ACPI Support</title>
-<!-- Internal functions only
-X!Edrivers/acpi/sleep/main.c
-X!Edrivers/acpi/sleep/wakeup.c
-X!Edrivers/acpi/motherboard.c
-X!Edrivers/acpi/bus.c
--->
-!Edrivers/acpi/scan.c
-!Idrivers/acpi/scan.c
-<!-- No correct structured comments
-X!Edrivers/acpi/pci_bind.c
--->
- </sect1>
- <sect1><title>Device drivers PnP support</title>
-!Idrivers/pnp/core.c
-<!-- No correct structured comments
-X!Edrivers/pnp/system.c
- -->
-!Edrivers/pnp/card.c
-!Idrivers/pnp/driver.c
-!Edrivers/pnp/manager.c
-!Edrivers/pnp/support.c
- </sect1>
- <sect1><title>Userspace IO devices</title>
-!Edrivers/uio/uio.c
-!Iinclude/linux/uio_driver.h
- </sect1>
- </chapter>
-
<chapter id="blkdev">
<title>Block Devices</title>
!Eblock/blk-core.c
!Edrivers/char/misc.c
</chapter>
- <chapter id="parportdev">
- <title>Parallel Port Devices</title>
-!Iinclude/linux/parport.h
-!Edrivers/parport/ieee1284.c
-!Edrivers/parport/share.c
-!Idrivers/parport/daisy.c
- </chapter>
-
- <chapter id="message_devices">
- <title>Message-based devices</title>
- <sect1><title>Fusion message devices</title>
-!Edrivers/message/fusion/mptbase.c
-!Idrivers/message/fusion/mptbase.c
-!Edrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptscsih.c
-!Idrivers/message/fusion/mptctl.c
-!Idrivers/message/fusion/mptspi.c
-!Idrivers/message/fusion/mptfc.c
-!Idrivers/message/fusion/mptlan.c
- </sect1>
- <sect1><title>I2O message devices</title>
-!Iinclude/linux/i2o.h
-!Idrivers/message/i2o/core.h
-!Edrivers/message/i2o/iop.c
-!Idrivers/message/i2o/iop.c
-!Idrivers/message/i2o/config-osm.c
-!Edrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/exec-osm.c
-!Idrivers/message/i2o/bus-osm.c
-!Edrivers/message/i2o/device.c
-!Idrivers/message/i2o/device.c
-!Idrivers/message/i2o/driver.c
-!Idrivers/message/i2o/pci.c
-!Idrivers/message/i2o/i2o_block.c
-!Idrivers/message/i2o/i2o_scsi.c
-!Idrivers/message/i2o/i2o_proc.c
- </sect1>
- </chapter>
-
- <chapter id="snddev">
- <title>Sound Devices</title>
-!Iinclude/sound/core.h
-!Esound/sound_core.c
-!Iinclude/sound/pcm.h
-!Esound/core/pcm.c
-!Esound/core/device.c
-!Esound/core/info.c
-!Esound/core/rawmidi.c
-!Esound/core/sound.c
-!Esound/core/memory.c
-!Esound/core/pcm_memory.c
-!Esound/core/init.c
-!Esound/core/isadma.c
-!Esound/core/control.c
-!Esound/core/pcm_lib.c
-!Esound/core/hwdep.c
-!Esound/core/pcm_native.c
-!Esound/core/memalloc.c
-<!-- FIXME: Removed for now since no structured comments in source
-X!Isound/sound_firmware.c
--->
- </chapter>
-
- <chapter id="uart16x50">
- <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
-!Edrivers/serial/8250.c
- </chapter>
-
- <chapter id="fbdev">
- <title>Frame Buffer Library</title>
-
- <para>
- The frame buffer drivers depend heavily on four data structures.
- These structures are declared in include/linux/fb.h. They are
- fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
- The last three can be made available to and from userland.
- </para>
-
- <para>
- fb_info defines the current state of a particular video card.
- Inside fb_info, there exists a fb_ops structure which is a
- collection of needed functions to make fbdev and fbcon work.
- fb_info is only visible to the kernel.
- </para>
-
- <para>
- fb_var_screeninfo is used to describe the features of a video card
- that are user defined. With fb_var_screeninfo, things such as
- depth and the resolution may be defined.
- </para>
-
- <para>
- The next structure is fb_fix_screeninfo. This defines the
- properties of a card that are created when a mode is set and can't
- be changed otherwise. A good example of this is the start of the
- frame buffer memory. This "locks" the address of the frame buffer
- memory, so that it cannot be changed or moved.
- </para>
-
- <para>
- The last structure is fb_monospecs. In the old API, there was
- little importance for fb_monospecs. This allowed for forbidden things
- such as setting a mode of 800x600 on a fix frequency monitor. With
- the new API, fb_monospecs prevents such things, and if used
- correctly, can prevent a monitor from being cooked. fb_monospecs
- will not be useful until kernels 2.5.x.
- </para>
-
- <sect1><title>Frame Buffer Memory</title>
-!Edrivers/video/fbmem.c
- </sect1>
-<!--
- <sect1><title>Frame Buffer Console</title>
-X!Edrivers/video/console/fbcon.c
- </sect1>
--->
- <sect1><title>Frame Buffer Colormap</title>
-!Edrivers/video/fbcmap.c
- </sect1>
-<!-- FIXME:
- drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
- out until somebody adds docs. KAO
- <sect1><title>Frame Buffer Generic Functions</title>
-X!Idrivers/video/fbgen.c
- </sect1>
-KAO -->
- <sect1><title>Frame Buffer Video Mode Database</title>
-!Idrivers/video/modedb.c
-!Edrivers/video/modedb.c
- </sect1>
- <sect1><title>Frame Buffer Macintosh Video Mode Database</title>
-!Edrivers/video/macmodes.c
- </sect1>
- <sect1><title>Frame Buffer Fonts</title>
- <para>
- Refer to the file drivers/video/console/fonts.c for more information.
- </para>
-<!-- FIXME: Removed for now since no structured comments in source
-X!Idrivers/video/console/fonts.c
--->
- </sect1>
- </chapter>
-
- <chapter id="input_subsystem">
- <title>Input Subsystem</title>
-!Iinclude/linux/input.h
-!Edrivers/input/input.c
-!Edrivers/input/ff-core.c
-!Edrivers/input/ff-memless.c
- </chapter>
-
- <chapter id="spi">
- <title>Serial Peripheral Interface (SPI)</title>
- <para>
- SPI is the "Serial Peripheral Interface", widely used with
- embedded systems because it is a simple and efficient
- interface: basically a multiplexed shift register.
- Its three signal wires hold a clock (SCK, often in the range
- of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
- a "Master In, Slave Out" (MISO) data line.
- SPI is a full duplex protocol; for each bit shifted out the
- MOSI line (one per clock) another is shifted in on the MISO line.
- Those bits are assembled into words of various sizes on the
- way to and from system memory.
- An additional chipselect line is usually active-low (nCS);
- four signals are normally used for each peripheral, plus
- sometimes an interrupt.
- </para>
- <para>
- The SPI bus facilities listed here provide a generalized
- interface to declare SPI busses and devices, manage them
- according to the standard Linux driver model, and perform
- input/output operations.
- At this time, only "master" side interfaces are supported,
- where Linux talks to SPI peripherals and does not implement
- such a peripheral itself.
- (Interfaces to support implementing SPI slaves would
- necessarily look different.)
- </para>
- <para>
- The programming interface is structured around two kinds of driver,
- and two kinds of device.
- A "Controller Driver" abstracts the controller hardware, which may
- be as simple as a set of GPIO pins or as complex as a pair of FIFOs
- connected to dual DMA engines on the other side of the SPI shift
- register (maximizing throughput). Such drivers bridge between
- whatever bus they sit on (often the platform bus) and SPI, and
- expose the SPI side of their device as a
- <structname>struct spi_master</structname>.
- SPI devices are children of that master, represented as a
- <structname>struct spi_device</structname> and manufactured from
- <structname>struct spi_board_info</structname> descriptors which
- are usually provided by board-specific initialization code.
- A <structname>struct spi_driver</structname> is called a
- "Protocol Driver", and is bound to a spi_device using normal
- driver model calls.
- </para>
- <para>
- The I/O model is a set of queued messages. Protocol drivers
- submit one or more <structname>struct spi_message</structname>
- objects, which are processed and completed asynchronously.
- (There are synchronous wrappers, however.) Messages are
- built from one or more <structname>struct spi_transfer</structname>
- objects, each of which wraps a full duplex SPI transfer.
- A variety of protocol tweaking options are needed, because
- different chips adopt very different policies for how they
- use the bits transferred with SPI.
- </para>
-!Iinclude/linux/spi/spi.h
-!Fdrivers/spi/spi.c spi_register_board_info
-!Edrivers/spi/spi.c
- </chapter>
-
- <chapter id="i2c">
- <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
-
- <para>
- I<superscript>2</superscript>C (or without fancy typography, "I2C")
- is an acronym for the "Inter-IC" bus, a simple bus protocol which is
- widely used where low data rate communications suffice.
- Since it's also a licensed trademark, some vendors use another
- name (such as "Two-Wire Interface", TWI) for the same bus.
- I2C only needs two signals (SCL for clock, SDA for data), conserving
- board real estate and minimizing signal quality issues.
- Most I2C devices use seven bit addresses, and bus speeds of up
- to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
- found wide use.
- I2C is a multi-master bus; open drain signaling is used to
- arbitrate between masters, as well as to handshake and to
- synchronize clocks from slower clients.
- </para>
-
- <para>
- The Linux I2C programming interfaces support only the master
- side of bus interactions, not the slave side.
- The programming interface is structured around two kinds of driver,
- and two kinds of device.
- An I2C "Adapter Driver" abstracts the controller hardware; it binds
- to a physical device (perhaps a PCI device or platform_device) and
- exposes a <structname>struct i2c_adapter</structname> representing
- each I2C bus segment it manages.
- On each I2C bus segment will be I2C devices represented by a
- <structname>struct i2c_client</structname>. Those devices will
- be bound to a <structname>struct i2c_driver</structname>,
- which should follow the standard Linux driver model.
- (At this writing, a legacy model is more widely used.)
- There are functions to perform various I2C protocol operations; at
- this writing all such functions are usable only from task context.
- </para>
-
- <para>
- The System Management Bus (SMBus) is a sibling protocol. Most SMBus
- systems are also I2C conformant. The electrical constraints are
- tighter for SMBus, and it standardizes particular protocol messages
- and idioms. Controllers that support I2C can also support most
- SMBus operations, but SMBus controllers don't support all the protocol
- options that an I2C controller will.
- There are functions to perform various SMBus protocol operations,
- either using I2C primitives or by issuing SMBus commands to
- i2c_adapter devices which don't support those I2C operations.
- </para>
-
-!Iinclude/linux/i2c.h
-!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
-!Edrivers/i2c/i2c-core.c
- </chapter>
-
<chapter id="clk">
<title>Clock Framework</title>
- in fork and exit, to attach and detach a task from its cpuset.
- in sched_setaffinity, to mask the requested CPUs by what's
allowed in that tasks cpuset.
- - in sched.c migrate_all_tasks(), to keep migrating tasks within
+ - in sched.c migrate_live_tasks(), to keep migrating tasks within
the CPUs allowed by their cpuset, if possible.
- in the mbind and set_mempolicy system calls, to mask the requested
Memory Nodes by what's allowed in that tasks cpuset.
- mem_exclusive flag: is memory placement exclusive?
- mem_hardwall flag: is memory allocation hardwalled
- memory_pressure: measure of how much paging pressure in cpuset
+ - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - sched_relax_domain_level: the searching range when migrating tasks
In addition, the root cpuset only has the following file:
- memory_pressure_enabled flag: compute memory_pressure?
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or re-prioritize jobs that
-are trying to use more memory than allowed on the nodes assigned them,
+are trying to use more memory than allowed on the nodes assigned to them,
and with tightly coupled, long running, massively parallel scientific
computing jobs that will dramatically fail to meet required performance
goals if they start to use more memory than allowed to them.
The algorithmic cost of load balancing and its impact on key shared
kernel data structures such as the task list increases more than
linearly with the number of CPUs being balanced. So the scheduler
-has support to partition the systems CPUs into a number of sched
+has support to partition the systems CPUs into a number of sched
domains such that it only load balances within each sched domain.
Each sched domain covers some subset of the CPUs in the system;
no two sched domains overlap; some CPUs might not be in any sched
The internal kernel cpuset to scheduler interface passes from the
cpuset code to the scheduler code a partition of the load balanced
CPUs in the system. This partition is a set of subsets (represented
-as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all
-the CPUs that must be load balanced.
-
-Whenever the 'sched_load_balance' flag changes, or CPUs come or go
-from a cpuset with this flag enabled, or a cpuset with this flag
-enabled is removed, the cpuset code builds a new such partition and
-passes it to the scheduler sched domain setup code, to have the sched
-domains rebuilt as necessary.
+as an array of struct cpumask) of CPUs, pairwise disjoint, that cover
+all the CPUs that must be load balanced.
+
+The cpuset code builds a new such partition and passes it to the
+scheduler sched domain setup code, to have the sched domains rebuilt
+as necessary, whenever:
+ - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - or CPUs come or go from a cpuset with this flag enabled,
+ - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+ and with this flag enabled changes,
+ - or a cpuset with non-empty CPUs and with this flag enabled is removed,
+ - or a cpu is offlined/onlined.
This partition exactly defines what sched domains the scheduler should
-setup - one sched domain for each element (cpumask_t) in the partition.
+setup - one sched domain for each element (struct cpumask) in the
+partition.
The scheduler remembers the currently active sched domain partitions.
When the scheduler routine partition_sched_domains() is invoked from
requests 0 and others are -1 then 0 is used.
Note that modifying this file will have both good and bad effects,
-and whether it is acceptable or not will be depend on your situation.
+and whether it is acceptable or not depends on your situation.
Don't modify this file if you are not sure.
If your situation is:
If a cpuset has its 'cpus' modified, then each task in that cpuset
will have its allowed CPU placement changed immediately. Similarly,
-if a tasks pid is written to a cpusets 'tasks' file, in either its
-current cpuset or another cpuset, then its allowed CPU placement is
-changed immediately. If such a task had been bound to some subset
-of its cpuset using the sched_setaffinity() call, the task will be
-allowed to run on any CPU allowed in its new cpuset, negating the
-affect of the prior sched_setaffinity() call.
+if a tasks pid is written to another cpusets 'tasks' file, then its
+allowed CPU placement is changed immediately. If such a task had been
+bound to some subset of its cpuset using the sched_setaffinity() call,
+the task will be allowed to run on any CPU allowed in its new cpuset,
+negating the effect of the prior sched_setaffinity() call.
In summary, the memory placement of a task whose cpuset is changed is
updated by the kernel, on the next allocation of a page for that task,
-but the processor placement is not updated, until that tasks pid is
-rewritten to the 'tasks' file of its cpuset. This is done to avoid
-impacting the scheduler code in the kernel with a check for changes
-in a tasks processor placement.
+and the processor placement is updated immediately.
Normally, once a page is allocated (given a physical page
of main memory) then that page stays on whatever node it
# The next line should display '/Charlie'
cat /proc/self/cpuset
-In the future, a C library interface to cpusets will likely be
-available. For now, the only way to query or modify cpusets is
-via the cpuset file system, using the various cd, mkdir, echo, cat,
-rmdir commands from the shell, or their equivalent from C.
+There are ways to query or modify cpusets:
+ - via the cpuset file system directly, using the various cd, mkdir, echo,
+ cat, rmdir commands from the shell, or their equivalent from C.
+ - via the C library libcpuset.
+ - via the C library libcgroup.
+ (http://sourceforge.net/proects/libcg/)
+ - via the python application cset.
+ (http://developer.novell.com/wiki/index.php/Cpuset)
The sched_setaffinity calls can also be done at the shell prompt using
SGI's runon or Robert Love's taskset. The mbind and set_mempolicy
is equivalent to
-mount -t cgroup -ocpuset X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /dev/cpuset
echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
2.2 Adding/removing cpus
Attributes
~~~~~~~~~~
struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off);
- ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off);
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
};
Attributes of devices can be exported via drivers using a simple
+++ /dev/null
-This README escorted the skystar2-driver rewriting procedure. It describes the
-state of the new flexcop-driver set and some internals are written down here
-too.
-
-This document hopefully describes things about the flexcop and its
-device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
-drivers based on the skystar2.c and other information.
-
-Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
-touched and rewritten.
-
-History & News
-==============
- 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
-
-
-
-
-General coding processing
-=========================
-
-We should proceed as follows (as long as no one complains):
-
-0) Think before start writing code!
-
-1) rewriting the skystar2.c with the help of the flexcop register descriptions
-and splitting up the files to a pci-bus-part and a flexcop-part.
-The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
-device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
-
-2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
-and other pci drivers)
-
-3) make some beautification (see 'Improvements when rewriting (refactoring) is
-done')
-
-4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
-a wider tester audience.
-
-5) creating an usb-bus-part using the already written flexcop code for the pci
-card.
-
-Idea: create a kernel-object for the flexcop and export all important
-functions. This option saves kernel-memory, but maybe a lot of functions have
-to be exported to kernel namespace.
-
-
-Current situation
-=================
-
-0) Done :)
-1) Done (some minor issues left)
-2) Done
-3) Not ready yet, more information is necessary
-4) next to be done (see the table below)
-5) USB driver is working (yes, there are some minor issues)
-
-What seems to be ready?
------------------------
-
-1) Rewriting
-1a) i2c is cut off from the flexcop-pci.c and seems to work
-1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
-1e) eeprom (reading MAC address)
-1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
-1f) misc. register accesses for reading parameters (e.g. resetting, revision)
-1g) pid/mac filter (flexcop-hw-filter.c)
-1i) dvb-stuff initialization in flexcop.c (done)
-1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
-1j) remove flexcop initialization from flexcop-pci.c completely (done)
-1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
-1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
-non-static where possible, moved code to proper places)
-
-2) Search for errors in the leftover of flexcop-pci.c (partially done)
-5a) add MAC address reading
-5c) feeding of ISOC data to the software demux (format of the isochronous data
-and speed optimization, no real error) (thanks to Vadim Catana)
-
-What to do in the near future?
---------------------------------------
-(no special order here)
-
-5) USB driver
-5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
-
-Testing changes
----------------
-
-O = item is working
-P = item is partially working
-X = item is not working
-N = item does not apply here
-<empty field> = item need to be examined
-
- | PCI | USB
-item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
--------+-------+---------+---------+-------+-------+---------+---------+-------
-1a) | O | | | | N | N | N | N
-1b) | O | | | | | | O |
-1c) | N | N | | | N | N | O |
-1d) | O | O
-1e) | O | O
-1f) | P
-1g) | O
-1h) | P |
-1i) | O | N
-1j) | O | N
-1l) | O | N
-2) | O | N
-5a) | N | O
-5b)* | N |
-5c) | N | O
-
-* - not done yet
-
-Known bugs and problems and TODO
---------------------------------
-
-1g/h/l) when pid filtering is enabled on the pci card
-
-DMA usage currently:
- The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
- address and triggers an IRQ when it's full and starts writing to the second
- address. When the second address is full, the IRQ is triggered again, and
- the flexcop writes to first address again, and so on.
- The buffersize of each address is currently 640*188 bytes.
-
- Problem is, when using hw-pid-filtering and doing some low-bandwidth
- operation (like scanning) the buffers won't be filled enough to trigger
- the IRQ. That's why:
-
- When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
- is triggered. Is the current write address of DMA1 different to the one
- during the last IRQ, then the data is passed to the demuxer.
-
- There is an additional DMA-IRQ-method: packet count IRQ. This isn't
- implemented correctly yet.
-
- The solution is to disable HW PID filtering, but I don't know how the DVB
- API software demux behaves on slow systems with 45MBit/s TS.
-
-Solved bugs :)
---------------
-1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
-working)
-SOLUTION: also index 0 was affected, because net_translation is done for
-these indexes by default
-
-5b) isochronous transfer does only work in the first attempt (for the Sky2PC
-USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
-woke up again (don't know if this need fixes, see
-flexcop-fe-tuner.c:flexcop_sleep)
-
-NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
-anything in the while the driver is loaded the first time), no transfers take
-place anymore.
-
-Improvements when rewriting (refactoring) is done
-=================================================
-
-- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
- (enable sleeping for other demods than dvb-s)
-- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
-
-Debugging
----------
-- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
- with this flexcop, this is important, because i2c is now using the
- flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
- that, please tell us so).
-
-Everything which is identical in the following table, can be put into a common
-flexcop-module.
-
- PCI USB
--------------------------------------------------------------------------------
-Different:
-Register access: accessing IO memory USB control message
-I2C bus: I2C bus of the FC USB control message
-Data transfer: DMA isochronous transfer
-EEPROM transfer: through i2c bus not clear yet
-
-Identical:
-Streaming: accessing registers
-PID Filtering: accessing registers
-Sram destinations: accessing registers
-Tuner/Demod: I2C bus
-DVB-stuff: can be written for common use
-
-Acknowledgements (just for the rewriting part)
-================
-
-Bjarne Steinsbo thought a lot in the first place of the pci part for this code
-sharing idea.
-
-Andreas Oberritter for providing a recent PCI initialization template
-(pluto2.c).
-
-Boleslaw Ciesielski for pointing out a problem with firmware loader.
-
-Vadim Catana for correcting the USB transfer.
-
-comments, critics and ideas to linux-dvb@linuxtv.org.
-How to set up the Technisat devices
-===================================
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
1) Find out what device you have
================================
If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one:
"Multimedia devices" => "Customise analog and hybrid tuner modules to build"
-In this directory uncheck every driver which is activated there.
+In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only).
Then please activate:
2a) Main module part:
a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
-b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR
+b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card
+OR
c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter
d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers"
Notice: d.) is helpful for troubleshooting
2b) Frontend module part:
-1.) Revision 2.3:
+1.) SkyStar DVB-S Revision 2.3:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based"
-2.) Revision 2.6:
+2.) SkyStar DVB-S Revision 2.6:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based"
-3.) Revision 2.7:
+3.) SkyStar DVB-S Revision 2.7:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based"
c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-4.) Revision 2.8:
+4.) SkyStar DVB-S Revision 2.8:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based"
d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller"
-5.) DVB-T card:
+5.) AirStar DVB-T card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based"
-6.) DVB-C card:
+6.) CableStar DVB-C card:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based"
-7.) ATSC card 1st generation:
+7.) AirStar ATSC card 1st generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510"
-8.) ATSC card 2nd generation:
+8.) AirStar ATSC card 2nd generation:
a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based"
-c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners"
-Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008
+9.) AirStar ATSC card 3rd generation:
+a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build"
+b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based"
+c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009
sysfs - _The_ filesystem for exporting kernel objects.
Patrick Mochel <mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
-10 January 2003
+Revised: 22 February 2009
+Original: 10 January 2003
What it is:
struct attribute {
char * name;
+ struct module *owner;
mode_t mode;
};
-int sysfs_create_file(struct kobject * kobj, struct attribute * attr);
-void sysfs_remove_file(struct kobject * kobj, struct attribute * attr);
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
A bare attribute contains no means to read or write the value of the
For example, the driver model defines struct device_attribute like:
struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device * dev, char * buf);
- ssize_t (*store)(struct device * dev, const char * buf);
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
};
int device_create_file(struct device *, struct device_attribute *);
It also defines this helper for defining device attributes:
-#define DEVICE_ATTR(_name, _mode, _show, _store) \
-struct device_attribute dev_attr_##_name = { \
- .attr = {.name = __stringify(_name) , .mode = _mode }, \
- .show = _show, \
- .store = _store, \
-};
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
For example, declaring
.attr = {
.name = "foo",
.mode = S_IWUSR | S_IRUGO,
+ .show = show_foo,
+ .store = store_foo,
},
- .show = show_foo,
- .store = store_foo,
};
specified when declaring the attribute. The method types should be as
simple as those defined for device attributes:
- ssize_t (*show)(struct device * dev, char * buf);
- ssize_t (*store)(struct device * dev, const char * buf);
+ssize_t (*show)(struct device * dev, struct device_attribute * attr,
+ char * buf);
+ssize_t (*store)(struct device * dev, struct device_attribute * attr,
+ const char * buf);
-IOW, they should take only an object and a buffer as parameters.
+IOW, they should take only an object, an attribute, and a buffer as parameters.
sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the
Structure:
struct device_attribute {
- struct attribute attr;
- ssize_t (*show)(struct device * dev, char * buf);
- ssize_t (*store)(struct device * dev, const char * buf);
+ struct attribute attr;
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
};
Declaring:
-DEVICE_ATTR(_name, _str, _mode, _show, _store);
+DEVICE_ATTR(_name, _mode, _show, _store);
Creation/Removal:
struct driver_attribute {
struct attribute attr;
ssize_t (*show)(struct device_driver *, char * buf);
- ssize_t (*store)(struct device_driver *, const char * buf);
+ ssize_t (*store)(struct device_driver *, const char * buf,
+ size_t count);
};
Declaring:
Parameters denoted with BOOT are actually interpreted by the boot
loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/i386/boot.txt>.
+need or coordination with <Documentation/x86/boot.txt>.
There are also arch-specific kernel-parameters not documented here.
See for example <Documentation/x86/x86_64/boot-options.txt>.
acpi= [HW,ACPI,X86-64,i386]
Advanced Configuration and Power Interface
- Format: { force | off | ht | strict | noirq }
+ Format: { force | off | ht | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
- ide= [HW] (E)IDE subsystem
- Format: ide=nodma or ide=doubler
+ ide-core.nodma= [HW] (E)IDE subsystem
+ Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
+ .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
+ .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
See Documentation/fb/modedb.txt.
vga= [BOOT,X86-32] Select a particular video mode
- See Documentation/x86/i386/boot.txt and
+ See Documentation/x86/boot.txt and
Documentation/svga.txt.
Use vga=ask for menu.
This is actually a boot loader parameter; the value is
============
The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc.
-series of products) supports iSCSI acceleration and iSCSI Direct Data Placement
+series of products) support iSCSI acceleration and iSCSI Direct Data Placement
(DDP) where the hardware handles the expensive byte touching operations, such
as CRC computation and verification, and direct DMA to the final host memory
destination:
the TCP segments onto the wire. It handles TCP retransmission if
needed.
- On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP
+ On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP
segments, separating the header and data, calculating and verifying
- the digests, then forwards the header to the host. The payload data,
+ the digests, then forwarding the header to the host. The payload data,
if possible, will be directly placed into the pre-posted host DDP
buffer. Otherwise, the payload data will be sent to the host too.
sure the ip address is unique in the network.
3. edit /etc/iscsi/iscsid.conf
- The default setting for MaxRecvDataSegmentLength (131072) is too big,
- replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no
- bigger than 15360 (for example 8192):
+ The default setting for MaxRecvDataSegmentLength (131072) is too big;
+ replace with a value no bigger than 15360 (for example 8192):
node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192
ISDN SUBSYSTEM
P: Karsten Keil
-M: kkeil@suse.de
+M: isdn@linux-pingi.de
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
M: jeremy@xensource.com
P: Chris Wright
M: chrisw@sous-sol.org
-P: Zachary Amsden
-M: zach@vmware.com
+P: Alok Kataria
+M: akataria@vmware.com
P: Rusty Russell
M: rusty@rustcorp.com.au
L: virtualization@lists.osdl.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
values to random values.
You can find more information on using the Linux kernel config tools
- in Documentation/kbuild/make-configs.txt.
+ in Documentation/kbuild/kconfig.txt.
NOTES on "make config":
- having unnecessary drivers will make the kernel bigger, and can
.globl mcount_call
mcount_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENTRY(ftrace_caller)
.globl ftrace_call
ftrace_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#else
adr r0, ftrace_stub
cmp r0, r2
bne trace
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
trace:
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
+ mov lr, r1 @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
* disable irqs for the duration. Note - these functions are almost
* entirely coded in assembly.
*/
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
: "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
- if (arch >= CPU_ARCH_ARMv7) {
- cacheid = CACHEID_VIPT_NONALIASING;
- if ((cachetype & (3 << 14)) == 1 << 14)
- cacheid |= CACHEID_ASID_TAGGED;
- } else if (arch >= CPU_ARCH_ARMv6) {
- if (cachetype & (1 << 23))
+ if (arch >= CPU_ARCH_ARMv6) {
+ if ((cachetype & (7 << 29)) == 4 << 29) {
+ /* ARMv7 register format */
+ cacheid = CACHEID_VIPT_NONALIASING;
+ if ((cachetype & (3 << 14)) == 1 << 14)
+ cacheid |= CACHEID_ASID_TAGGED;
+ } else if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
- sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
+ /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ setup_usb(500, 8);
+
return 0;
}
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
-
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
- setup_usb(500, 8);
}
static __init void davinci_evm_irq_init(void)
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_GPIO,
},
+ {
+ .name = "usb",
+ .rate = &commonrate,
+ .lpsc = DAVINCI_LPSC_USB,
+ },
{
.name = "AEMIFCLK",
.rate = &commonrate,
#elif defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
#endif
+ .clock = "usb",
.config = &musb_config,
};
#ifndef __ASSEMBLY__
+struct i2c_board_info;
+
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+
+#include <mach/irqs.h>
#include <mach/hardware.h>
static struct resource imx_csi_resources[] = {
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#ifdef CONFIG_I2C2_OMAP_BEAGLE
omap_register_i2c_bus(2, 400, NULL, 0);
#endif
- omap_register_i2c_bus(3, 400, NULL, 0);
+ /* Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz */
+ omap_register_i2c_bus(3, 100, NULL, 0);
return 0;
}
/*****************************************************************************
* XOR engine
****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+};
+
static struct resource orion5x_xor_shared_resources[] = {
{
.name = "xor low",
static struct platform_device orion5x_xor_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_xor_shared_data,
+ },
.num_resources = ARRAY_SIZE(orion5x_xor_shared_resources),
.resource = orion5x_xor_shared_resources,
};
#include <linux/serial_8250.h>
#include <linux/ata_platform.h>
#include <linux/io.h>
+#include <linux/i2c.h>
#include <asm/elf.h>
#include <asm/mach-types.h>
&pata_device,
};
+static struct i2c_board_info i2c_rtc = {
+ I2C_BOARD_INFO("pcf8583", 0x50)
+};
+
static int __init rpc_init(void)
{
+ i2c_register_board_info(0, &i2c_rtc, 1);
return platform_add_devices(devs, ARRAY_SIZE(devs));
}
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
#ifdef CONFIG_SMDK6410_SD_CH0
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("WM8580", 0X1b), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
};
static struct i2c_board_info i2c_devs1[] __initdata = {
#ifdef CONFIG_CPU_32v6K
clrex
#else
- strex r0, r1, [sp] @ Clear the exclusive monitor
+ sub r1, sp, #4 @ Get unused stack location
+ strex r0, r1, [r1] @ Clear the exclusive monitor
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
#include <linux/init.h>
#include <linux/highmem.h>
-static void __attribute__((naked))
+static void __naked
feroceon_copy_user_page(void *kto, const void *kfrom)
{
asm("\
*
* FIXME: do we need to handle cache stuff...
*/
-static void __attribute__((naked))
+static void __naked
v3_copy_user_page(void *kto, const void *kfrom)
{
asm("\n\
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
asm volatile(
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
v4wb_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* dirty data in the cache. However, we do have to ensure that
* subsequent reads are up to date.
*/
-static void __attribute__((naked))
+static void __naked
v4wt_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* if we eventually end up using our copied page.
*
*/
-static void __attribute__((naked))
+static void __naked
xsc3_mc_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* Dcache aliasing issue. The writes will be forwarded to the write buffer,
* and merged as appropriate.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
/*
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
- return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
- return omap_32k_ticks_to_nsecs(omap_32k_read());
+ unsigned long long ret;
+
+ ret = (unsigned long long)omap_32k_read();
+ ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+ return ret;
}
static int __init omap_init_clocksource_32k(void)
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len);
!defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX) && \
!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
#endif
#ifndef __ASSEMBLER__
&clk_48m,
};
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
{
struct clk *clkp;
int ret;
return 0;
}
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);
#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
#include <mach/map.h>
#include <plat/cpu.h>
u32 mask;
mask = __raw_readl(S3C64XX_EINT0MASK);
- mask |= eint_irq_to_bit(irq);
+ mask &= ~eint_irq_to_bit(irq);
__raw_writel(mask, S3C64XX_EINT0MASK);
}
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
+ int pin;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
ctrl |= newvalue << shift;
__raw_writel(ctrl, reg);
+ /* set the GPIO pin appropriately */
+
+ if (offs < 23)
+ pin = S3C64XX_GPN(offs);
+ else
+ pin = S3C64XX_GPM(offs - 23);
+
+ s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
return 0;
}
s3c_irq_demux_eint(20, 27);
}
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
{
int irq;
static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
{
- void *reg_base = uirq->regs;
+ void __iomem *reg_base = uirq->regs;
unsigned int irq;
int offs;
* ext_xtal_mux for want of an actual name from the manual.
*/
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
.name = "ext_xtal",
.id = -1,
};
void __iomem *reg_divider;
};
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.id = -1,
.sources = &clk_src_apll,
};
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
.id = -1,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
.id = -1,
return rate;
}
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_mpll.clk,
};
static struct clk *clkset_uhost_list[] = {
+ &clk_48m,
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
- &clk_48m,
};
static struct clk_sources clkset_uhost = {
rate = clk_round_rate(clk, rate);
div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
val = __raw_readl(reg);
- val &= ~sclk->mask;
- val |= (rate - 1) << sclk->shift;
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
__raw_writel(val, reg);
return 0;
static struct clksrc_clk clk_usbhost = {
.clk = {
- .name = "usb-host-bus",
+ .name = "usb-bus-host",
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
gprisc3 MACH_GPRISC3 GPRISC3 1823
-stamp9260 MACH_STAMP9260 STAMP9260 1824
+stamp9g20 MACH_STAMP9G20 STAMP9G20 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
tavorevb MACH_TAVOREVB TAVOREVB 1827
benzina MACH_BENZINA BENZINA 2003
blaze MACH_BLAZE BLAZE 2004
linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
-htcvenus MACH_HTCVENUS HTCVENUS 2006
+htckovsky MACH_HTCVENUS HTCVENUS 2006
+sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007
+hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008
+sapphira MACH_SAPPHIRA SAPPHIRA 2009
+dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010
+armbox MACH_ARMBOX ARMBOX 2011
+harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012
+ribaldo MACH_RIBALDO RIBALDO 2013
+agora MACH_AGORA AGORA 2014
+omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015
+a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016
+usg2410 MACH_USG2410 USG2410 2017
+pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018
+mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019
+topas910 MACH_TOPAS910 TOPAS910 2020
+hyena MACH_HYENA HYENA 2021
+pospax MACH_POSPAX POSPAX 2022
+hdl_gx MACH_HDL_GX HDL_GX 2023
+ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024
+ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025
+crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026
+egauge2 MACH_EGAUGE2 EGAUGE2 2027
+didj MACH_DIDJ DIDJ 2028
+m_s3c2443 MACH_MEISTER MEISTER 2029
+htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030
+cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031
+smdk6440 MACH_SMDK6440 SMDK6440 2032
+omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033
+ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034
+pvg610_100 MACH_PVG610 PVG610 2035
+hprw6815 MACH_HPRW6815 HPRW6815 2036
+omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037
+nas4220b MACH_NAS4220B NAS4220B 2038
+htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039
+htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040
+scaler MACH_SCALER SCALER 2041
+zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042
+aspenite MACH_ASPENITE ASPENITE 2043
+teton MACH_TETON TETON 2044
+ttc_dkb MACH_TTC_DKB TTC_DKB 2045
+bishop2 MACH_BISHOP2 BISHOP2 2046
+ippv5 MACH_IPPV5 IPPV5 2047
+farm926 MACH_FARM926 FARM926 2048
+mmccpu MACH_MMCCPU MMCCPU 2049
+sgmsfl MACH_SGMSFL SGMSFL 2050
+tt8000 MACH_TT8000 TT8000 2051
+zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052
+mptc MACH_MPTC MPTC 2053
+h6051 MACH_H6051 H6051 2054
+pvg610_101 MACH_PVG610_101 PVG610_101 2055
+stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056
+pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057
+tny_a9260 MACH_TNY_A9260 TNY_A9260 2058
+tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059
+aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060
+dx900 MACH_DX900 DX900 2061
+cpodc2 MACH_CPODC2 CPODC2 2062
+tilt_8925 MACH_TILT_8925 TILT_8925 2063
+davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064
+swordfish MACH_SWORDFISH SWORDFISH 2065
+corvus MACH_CORVUS CORVUS 2066
+taurus MACH_TAURUS TAURUS 2067
+axm MACH_AXM AXM 2068
+axc MACH_AXC AXC 2069
+baby MACH_BABY BABY 2070
+mp200 MACH_MP200 MP200 2071
+pcm043 MACH_PCM043 PCM043 2072
+hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073
+kbk9g20 MACH_KBK9G20 KBK9G20 2074
+adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075
+avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076
+suc82x MACH_SUC SUC 2077
+at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078
+mendoza MACH_MENDOZA MENDOZA 2079
+kira MACH_KIRA KIRA 2080
+mx1hbm MACH_MX1HBM MX1HBM 2081
+quatro43xx MACH_QUATRO43XX QUATRO43XX 2082
+quatro4230 MACH_QUATRO4230 QUATRO4230 2083
+nsb400 MACH_NSB400 NSB400 2084
+drp255 MACH_DRP255 DRP255 2085
+thoth MACH_THOTH THOTH 2086
+firestone MACH_FIRESTONE FIRESTONE 2087
+asusp750 MACH_ASUSP750 ASUSP750 2088
+ctera_dl MACH_CTERA_DL CTERA_DL 2089
+socr MACH_SOCR SOCR 2090
+htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091
+heroc MACH_HEROC HEROC 2092
+zeno6800 MACH_ZENO6800 ZENO6800 2093
+sc2mcs MACH_SC2MCS SC2MCS 2094
+gene100 MACH_GENE100 GENE100 2095
+as353x MACH_AS353X AS353X 2096
+sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097
+at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098
+mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099
+cc9200 MACH_CC9200 CC9200 2100
+sm9200 MACH_SM9200 SM9200 2101
+tp9200 MACH_TP9200 TP9200 2102
+snapperdv MACH_SNAPPERDV SNAPPERDV 2103
+avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104
+avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105
+omap3axon MACH_OMAP3AXON OMAP3AXON 2106
+ma8xx MACH_MA8XX MA8XX 2107
+mp201ek MACH_MP201EK MP201EK 2108
+davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109
+mpa1600 MACH_MPA1600 MPA1600 2110
+pelco_troy MACH_PELCO_TROY PELCO_TROY 2111
+nsb667 MACH_NSB667 NSB667 2112
+rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113
+twocom MACH_TWOCOM TWOCOM 2114
+ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115
+hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116
+afeusb MACH_AFEUSB AFEUSB 2117
+t830 MACH_T830 T830 2118
+spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119
+om_3d7k MACH_OM_3D7K OM_3D7K 2120
+picocom2 MACH_PICOCOM2 PICOCOM2 2121
+uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122
+uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123
+cherry MACH_CHERRY CHERRY 2124
+mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125
+s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126
+tx37 MACH_TX37 TX37 2127
+sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128
+benzglb MACH_BENZGLB BENZGLB 2129
+benztd MACH_BENZTD BENZTD 2130
+cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131
+solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132
+mx27wallace MACH_MX27WALLACE MX27WALLACE 2133
+fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134
+rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135
+smallogger MACH_SMALLOGGER SMALLOGGER 2136
config IA64_XEN_GUEST
bool "Xen guest"
+ select SWIOTLB
depends on XEN
+ help
+ Build a kernel that runs on Xen guest domain. At this moment only
+ 16KB page size in supported.
endchoice
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
- def_bool y
- depends on NEED_MULTIPLE_NODES
+ def_bool NUMA && SPARSEMEM
config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
and include PCI device scope covered by these DMA
remapping devices.
+config DMAR_DEFAULT_ON
+ def_bool y
+ prompt "Enable DMA Remapping Devices by default"
+ depends on DMAR
+ help
+ Selecting this option will enable a DMAR device at boot time if
+ one is found. If this option is not selected, DMAR support can
+ be enabled by passing intel_iommu=on to the kernel. It is
+ recommended you say N here while the DMAR code remains
+ experimental.
+
endmenu
endif
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc1
+# Fri Jan 16 11:49:59 2009
+#
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
+# CONFIG_GROUP_SCHED is not set
+
+#
+# Control Group support
+#
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_FREEZER=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_ZONE_DMA=y
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_SWIOTLB=y
+CONFIG_IOMMU_HELPER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_DMI=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_PARAVIRT_GUEST=y
+CONFIG_PARAVIRT=y
+CONFIG_XEN=y
+CONFIG_XEN_XENCOMM=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_SGI_UV is not set
+# CONFIG_IA64_HP_SIM is not set
+CONFIG_IA64_XEN_GUEST=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=17
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_PERMIT_BSP_REMOVE=y
+CONFIG_FORCE_CPEI_RETARGET=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+# CONFIG_IA32_SUPPORT is not set
+# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+# CONFIG_IA64_MC_ERR_INJECT is not set
+# CONFIG_IA64_ESI is not set
+# CONFIG_IA64_HP_AML_NFW is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+CONFIG_DMIID=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ACPI=y
+CONFIG_ACPI_SLEEP=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_PROCFS_POWER=y
+CONFIG_ACPI_SYSFS_POWER=y
+CONFIG_ACPI_PROC_EVENT=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+# CONFIG_ACPI_CUSTOM_DSDT is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_PCI_SLOT is not set
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_PCCARD is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_PNP=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XEN_BLKDEV_FRONTEND=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_SB1000 is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_XEN_NETDEV_FRONTEND=y
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
+CONFIG_HVC_XEN=y
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_HPET=y
+CONFIG_HPET_MMAP=y
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=m
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_SCRUB_PAGES=y
+CONFIG_XENFS=y
+CONFIG_XEN_COMPAT_XENFS=y
+# CONFIG_STAGING is not set
+# CONFIG_MSPEC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
+# CONFIG_IOMMU_API is not set
/* BTE status register only supports 16 bits for length field */
#define BTE_LEN_BITS (16)
#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
/* Define hardware */
if (trigger == IOSAPIC_EDGE)
return -EINVAL;
- for (i = 0; i <= NR_IRQS; i++) {
+ for (i = 0; i < NR_IRQS; i++) {
info = &iosapic_intr_info[i];
if (info->trigger == trigger && info->polarity == pol &&
(info->dmode == IOSAPIC_FIXED ||
return -EBUSY;
}
+ cpu_clear(cpu, cpu_online_map);
+
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
- return (-EBUSY);
+ return -EBUSY;
}
remove_siblinginfo(cpu);
fixup_irqs();
- cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
/* next, remove hash table entries for this table */
- for (index = 0; index <= UNW_HASH_SIZE; ++index) {
+ for (index = 0; index < UNW_HASH_SIZE; ++index) {
tmp = unw.cache + unw.hash[index];
if (unw.hash[index] >= UNW_CACHE_SIZE
|| tmp->ip < table->start || tmp->ip >= table->end)
return BTE_SUCCESS;
}
- BUG_ON((len & L1_CACHE_MASK) ||
- (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
- BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
+ BUG_ON(len & L1_CACHE_MASK);
+ BUG_ON(src & L1_CACHE_MASK);
+ BUG_ON(dest & L1_CACHE_MASK);
+ BUG_ON(len > BTE_MAX_XFER);
/*
* Start with interface corresponding to cpu number
depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL
select XEN_XENCOMM
select NO_IDLE_HZ
-
- # those are required to save/restore.
+ # followings are required to save/restore.
select ARCH_SUSPEND_POSSIBLE
select SUSPEND
select PM_SLEEP
xen_setup_vcpu_info_placement();
}
-static const struct pv_init_ops xen_init_ops __initdata = {
+static const struct pv_init_ops xen_init_ops __initconst = {
.banner = xen_banner,
.reserve_memory = xen_reserve_memory,
HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op);
}
-static const struct pv_iosapic_ops xen_iosapic_ops __initdata = {
+static const struct pv_iosapic_ops xen_iosapic_ops __initconst = {
.pcat_compat_init = xen_pcat_compat_init,
.__get_irq_chip = xen_iosapic_get_irq_chip,
" jbra ret_from_interrupt\n" \
: : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \
"n" (PT_OFF_SR), "n" (n), \
- "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a) \
- : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)), \
+ "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \
+ : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \
"m" (preempt_count()), "di" (HARDIRQ_OFFSET) \
); \
for (;;); /* fake noreturn */ \
/* Initialize the MFP(s) */
#ifdef ATARI_USE_SOFTWARE_EOI
- mfp.vec_adr = 0x48; /* Software EOI-Mode */
+ st_mfp.vec_adr = 0x48; /* Software EOI-Mode */
#else
- mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
+ st_mfp.vec_adr = 0x40; /* Automatic EOI-Mode */
#endif
- mfp.int_en_a = 0x00; /* turn off MFP-Ints */
- mfp.int_en_b = 0x00;
- mfp.int_mk_a = 0xff; /* no Masking */
- mfp.int_mk_b = 0xff;
+ st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */
+ st_mfp.int_en_b = 0x00;
+ st_mfp.int_mk_a = 0xff; /* no Masking */
+ st_mfp.int_mk_b = 0xff;
if (ATARIHW_PRESENT(TT_MFP)) {
#ifdef ATARI_USE_SOFTWARE_EOI
ACIA_RHTID : 0);
/* make sure the interrupt line is up */
- } while ((mfp.par_dt_reg & 0x10) == 0);
+ } while ((st_mfp.par_dt_reg & 0x10) == 0);
/* enable ACIA Interrupts */
- mfp.active_edge &= ~0x10;
+ st_mfp.active_edge &= ~0x10;
atari_turnon_irq(IRQ_MFP_ACIA);
ikbd_self_test = 1;
printk("STND_SHIFTER ");
}
}
- if (hwreg_present(&mfp.par_dt_reg)) {
+ if (hwreg_present(&st_mfp.par_dt_reg)) {
ATARIHW_SET(ST_MFP);
printk("ST_MFP ");
}
static inline void ata_mfp_out(char c)
{
- while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
+ while (!(st_mfp.trn_stat & 0x80)) /* wait for tx buf empty */
barrier();
- mfp.usart_dta = c;
+ st_mfp.usart_dta = c;
}
static void atari_mfp_console_write(struct console *co, const char *str,
/* This a some-seconds timeout in case no printer is connected */
unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
- while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+ while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
;
if (!i)
return 0;
#if 0
int atari_mfp_console_wait_key(struct console *co)
{
- while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
+ while (!(st_mfp.rcv_stat & 0x80)) /* wait for rx buf filled */
barrier();
- return mfp.usart_dta;
+ return st_mfp.usart_dta;
}
int atari_scc_console_wait_key(struct console *co)
baud = B9600; /* use default 9600bps for non-implemented rates */
baud -= B1200; /* baud_table[] starts at 1200bps */
- mfp.trn_stat &= ~0x01; /* disable TX */
- mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
- mfp.tim_ct_cd &= 0x70; /* stop timer D */
- mfp.tim_dt_d = baud_table[baud];
- mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
- mfp.trn_stat |= 0x01; /* enable TX */
+ st_mfp.trn_stat &= ~0x01; /* disable TX */
+ st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+ st_mfp.tim_ct_cd &= 0x70; /* stop timer D */
+ st_mfp.tim_dt_d = baud_table[baud];
+ st_mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */
+ st_mfp.trn_stat |= 0x01; /* enable TX */
}
#define SCC_WRITE(reg, val) \
atari_sched_init(irq_handler_t timer_routine)
{
/* set Timer C data Register */
- mfp.tim_dt_c = INT_TICKS;
+ st_mfp.tim_dt_c = INT_TICKS;
/* start timer C, div = 1:100 */
- mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
+ st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60;
/* install interrupt service routine for MFP Timer C */
if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
"timer", timer_routine))
unsigned long ticks, offset = 0;
/* read MFP timer C current value */
- ticks = mfp.tim_dt_c;
+ ticks = st_mfp.tim_dt_c;
/* The probability of underflow is less than 2% */
if (ticks > INT_TICKS - INT_TICKS / 50)
/* Check for pending timer interrupt */
- if (mfp.int_pn_b & (1 << 5))
+ if (st_mfp.int_pn_b & (1 << 5))
offset = TICK_SIZE;
ticks = INT_TICKS - ticks;
* of nops on various machines. Somebody claimed that the tstb takes 600 ns.
*/
#define MFPDELAY() \
- __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+ __asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" );
/* Do cache push/invalidate for DMA read/write. This function obeys the
* snooping on some machines (Medusa) and processors: The Medusa itself can
u_char char_dummy23;
u_char usart_dta;
};
-# define mfp ((*(volatile struct MFP*)MFP_BAS))
+# define st_mfp ((*(volatile struct MFP*)MFP_BAS))
/* TT's second MFP */
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
return( *reg & mask );
}
{ unsigned char mask, *reg;
mask = 1 << (irq & 7);
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
__asm__ __volatile__ ( "orb %0,%1"
: : "di" (mask), "m" (*reg) : "memory" );
{ unsigned char mask, *reg;
mask = ~(1 << (irq & 7));
- reg = (unsigned char *)&mfp.int_en_a + type*4 +
+ reg = (unsigned char *)&st_mfp.int_en_a + type*4 +
((irq & 8) >> 2) + (((irq-8) & 16) << 3);
if (type == MFP_PENDING || type == MFP_SERVICE)
__asm__ __volatile__ ( "moveb %0,%1"
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
- select CPU_CAVIUM_OCTEON
+ select SYS_HAS_CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
- select CPU_CAVIUM_OCTEON
+ select SYS_HAS_CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
help
This option supports all of the Octeon reference boards from Cavium
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
+ depends on SYS_HAS_CPU_CAVIUM_OCTEON
select IRQ_CPU
select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
config SYS_HAS_CPU_SB1
bool
+config SYS_HAS_CPU_CAVIUM_OCTEON
+ bool
+
#
# CPU may reorder R->R, R->W, W->R, W->W
# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
config 64BIT
bool "64-bit kernel"
depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+ select HAVE_SYSCALL_WRAPPERS
help
Select this option if you want to build a 64-bit kernel.
* setup counter 1 (RTC) to tick at full speed
*/
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
au_sync();
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
au_sync();
t = 0xffffff;
- while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+ while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t)
asm volatile ("nop");
if (!t)
goto cntr_err;
#ifndef __ASM_SECCOMP_H
-#include <linux/thread_info.h>
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
seq_printf(p, " %14s", irq_desc[i].chip->name);
- seq_printf(p, "-%-8s", irq_desc[i].name);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
#include <linux/module.h>
#include <linux/binfmts.h>
#include <linux/security.h>
+#include <linux/syscalls.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ipc.h>
#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL))
#endif
-asmlinkage unsigned long
-sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
{
struct file * file = NULL;
unsigned long error;
int rlim_max;
};
-asmlinkage long sys32_truncate64(const char __user * path,
- unsigned long __dummy, int a2, int a3)
+SYSCALL_DEFINE4(32_truncate64, const char __user *, path,
+ unsigned long, __dummy, unsigned long, a2, unsigned long, a3)
{
return sys_truncate(path, merge_64(a2, a3));
}
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy,
- int a2, int a3)
+SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy,
+ unsigned long, a2, unsigned long, a3)
{
return sys_ftruncate(fd, merge_64(a2, a3));
}
-asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
- unsigned int offset_low, loff_t __user * result,
- unsigned int origin)
+SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high,
+ unsigned long, offset_low, loff_t __user *, result,
+ unsigned long, origin)
{
return sys_llseek(fd, offset_high, offset_low, result, origin);
}
lseek back to original location. They fail just like lseek does on
non-seekable files. */
-asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count,
+ unsigned long, unused, unsigned long, a4, unsigned long, a5)
{
return sys_pread64(fd, buf, count, merge_64(a4, a5));
}
-asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
- size_t count, u32 unused, u64 a4, u64 a5)
+SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf,
+ size_t, count, u32, unused, u64, a4, u64, a5)
{
return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
}
-asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
- struct compat_timespec __user *interval)
+SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid,
+ struct compat_timespec __user *, interval)
{
struct timespec t;
int ret;
#ifdef CONFIG_SYSVIPC
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
+ unsigned long, ptr, unsigned long, fifth)
{
int version, err;
#else
-asmlinkage long
-sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth)
+SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third,
+ u32, ptr, u32 fifth)
{
return -ENOSYS;
}
#endif /* CONFIG_SYSVIPC */
#ifdef CONFIG_MIPS32_N32
-asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg)
+SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg)
{
/* compat_sys_semctl expects a pointer to union semun */
u32 __user *uptr = compat_alloc_user_space(sizeof(u32));
return compat_sys_semctl(semid, semnum, cmd, uptr);
}
-asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg)
+SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz,
+ int, msgflg)
{
return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp));
}
-asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp,
- int msgflg)
+SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
+ int, msgtyp, int, msgflg)
{
return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64,
compat_ptr(msgp));
#ifdef CONFIG_SYSCTL_SYSCALL
-asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args)
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
{
struct sysctl_args32 tmp;
int error;
return error;
}
+#else
+
+SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
+{
+ return -ENOSYS;
+}
+
#endif /* CONFIG_SYSCTL_SYSCALL */
-asmlinkage long sys32_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
{
int ret = 0;
return ret;
}
-asmlinkage int sys32_personality(unsigned long personality)
+SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
int ret;
personality &= 0xffffffff;
extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf);
-asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
+SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32)
{
int err;
struct ustat tmp;
return err;
}
-asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
- s32 count)
+SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd,
+ compat_off_t __user *, offset, s32, count)
{
mm_segment_t old_fs = get_fs();
int ret;
sys sys_swapon 2
sys sys_reboot 3
sys sys_old_readdir 3
- sys old_mmap 6 /* 4090 */
+ sys sys_mips_mmap 6 /* 4090 */
sys sys_munmap 2
sys sys_truncate 2
sys sys_ftruncate 2
sys sys_sendfile 4
sys sys_ni_syscall 0
sys sys_ni_syscall 0
- sys sys_mmap2 6 /* 4210 */
+ sys sys_mips_mmap2 6 /* 4210 */
sys sys_truncate64 4
sys sys_ftruncate64 4
sys sys_stat64 2
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
- PTR old_mmap
+ PTR sys_mips_mmap
PTR sys_mprotect /* 5010 */
PTR sys_munmap
PTR sys_brk
PTR sys_newlstat
PTR sys_poll
PTR sys_lseek
- PTR old_mmap
+ PTR sys_mips_mmap
PTR sys_mprotect /* 6010 */
PTR sys_munmap
PTR sys_brk
- PTR sys32_rt_sigaction
- PTR sys32_rt_sigprocmask
+ PTR sys_32_rt_sigaction
+ PTR sys_32_rt_sigprocmask
PTR compat_sys_ioctl /* 6015 */
PTR sys_pread64
PTR sys_pwrite64
PTR compat_sys_setitimer
PTR sys_alarm
PTR sys_getpid
- PTR sys32_sendfile
+ PTR sys_32_sendfile
PTR sys_socket /* 6040 */
PTR sys_connect
PTR sys_accept
PTR sys_exit
PTR compat_sys_wait4
PTR sys_kill /* 6060 */
- PTR sys32_newuname
+ PTR sys_32_newuname
PTR sys_semget
PTR sys_semop
- PTR sysn32_semctl
+ PTR sys_n32_semctl
PTR sys_shmdt /* 6065 */
PTR sys_msgget
- PTR sysn32_msgsnd
- PTR sysn32_msgrcv
+ PTR sys_n32_msgsnd
+ PTR sys_n32_msgrcv
PTR compat_sys_msgctl
PTR compat_sys_fcntl /* 6070 */
PTR sys_flock
PTR sys_getsid
PTR sys_capget
PTR sys_capset
- PTR sys32_rt_sigpending /* 6125 */
+ PTR sys_32_rt_sigpending /* 6125 */
PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sys_32_rt_sigqueueinfo
PTR sysn32_rt_sigsuspend
PTR sys32_sigaltstack
PTR compat_sys_utime /* 6130 */
PTR sys_mknod
- PTR sys32_personality
- PTR sys32_ustat
+ PTR sys_32_personality
+ PTR sys_32_ustat
PTR compat_sys_statfs
PTR compat_sys_fstatfs /* 6135 */
PTR sys_sysfs
PTR sys_sched_getscheduler
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
- PTR sys32_sched_rr_get_interval /* 6145 */
+ PTR sys_32_sched_rr_get_interval /* 6145 */
PTR sys_mlock
PTR sys_munlock
PTR sys_mlockall
PTR sys_munlockall
PTR sys_vhangup /* 6150 */
PTR sys_pivot_root
- PTR sys32_sysctl
+ PTR sys_32_sysctl
PTR sys_prctl
PTR compat_sys_adjtimex
PTR compat_sys_setrlimit /* 6155 */
PTR sys_olduname
PTR sys_umask /* 4060 */
PTR sys_chroot
- PTR sys32_ustat
+ PTR sys_32_ustat
PTR sys_dup2
PTR sys_getppid
PTR sys_getpgrp /* 4065 */
PTR sys_setsid
- PTR sys32_sigaction
+ PTR sys_32_sigaction
PTR sys_sgetmask
PTR sys_ssetmask
PTR sys_setreuid /* 4070 */
PTR sys_swapon
PTR sys_reboot
PTR compat_sys_old_readdir
- PTR old_mmap /* 4090 */
+ PTR sys_mips_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_ftruncate
PTR compat_sys_wait4
PTR sys_swapoff /* 4115 */
PTR compat_sys_sysinfo
- PTR sys32_ipc
+ PTR sys_32_ipc
PTR sys_fsync
PTR sys32_sigreturn
PTR sys32_clone /* 4120 */
PTR sys_setdomainname
- PTR sys32_newuname
+ PTR sys_32_newuname
PTR sys_ni_syscall /* sys_modify_ldt */
PTR compat_sys_adjtimex
PTR sys_mprotect /* 4125 */
PTR sys_fchdir
PTR sys_bdflush
PTR sys_sysfs /* 4135 */
- PTR sys32_personality
+ PTR sys_32_personality
PTR sys_ni_syscall /* for afs_syscall */
PTR sys_setfsuid
PTR sys_setfsgid
- PTR sys32_llseek /* 4140 */
+ PTR sys_32_llseek /* 4140 */
PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_ni_syscall /* 4150 */
PTR sys_getsid
PTR sys_fdatasync
- PTR sys32_sysctl
+ PTR sys_32_sysctl
PTR sys_mlock
PTR sys_munlock /* 4155 */
PTR sys_mlockall
PTR sys_sched_yield
PTR sys_sched_get_priority_max
PTR sys_sched_get_priority_min
- PTR sys32_sched_rr_get_interval /* 4165 */
+ PTR sys_32_sched_rr_get_interval /* 4165 */
PTR compat_sys_nanosleep
PTR sys_mremap
PTR sys_accept
PTR sys_getresgid
PTR sys_prctl
PTR sys32_rt_sigreturn
- PTR sys32_rt_sigaction
- PTR sys32_rt_sigprocmask /* 4195 */
- PTR sys32_rt_sigpending
+ PTR sys_32_rt_sigaction
+ PTR sys_32_rt_sigprocmask /* 4195 */
+ PTR sys_32_rt_sigpending
PTR compat_sys_rt_sigtimedwait
- PTR sys32_rt_sigqueueinfo
+ PTR sys_32_rt_sigqueueinfo
PTR sys32_rt_sigsuspend
- PTR sys32_pread /* 4200 */
- PTR sys32_pwrite
+ PTR sys_32_pread /* 4200 */
+ PTR sys_32_pwrite
PTR sys_chown
PTR sys_getcwd
PTR sys_capget
PTR sys_capset /* 4205 */
PTR sys32_sigaltstack
- PTR sys32_sendfile
+ PTR sys_32_sendfile
PTR sys_ni_syscall
PTR sys_ni_syscall
- PTR sys32_mmap2 /* 4210 */
- PTR sys32_truncate64
- PTR sys32_ftruncate64
+ PTR sys_mips_mmap2 /* 4210 */
+ PTR sys_32_truncate64
+ PTR sys_32_ftruncate64
PTR sys_newstat
PTR sys_newlstat
PTR sys_newfstat /* 4215 */
PTR compat_sys_mq_notify /* 4275 */
PTR compat_sys_mq_getsetattr
PTR sys_ni_syscall /* sys_vserver */
- PTR sys32_waitid
+ PTR sys_32_waitid
PTR sys_ni_syscall /* available, was setaltroot */
PTR sys_add_key /* 4280 */
PTR sys_request_key
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/compiler.h>
+#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <asm/abi.h>
}
#ifdef CONFIG_TRAD_SIGNALS
-asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act,
- struct sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+ struct sigaction __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
return -ERESTARTNOHAND;
}
-asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act,
- struct sigaction32 __user *oact)
+SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act,
+ struct sigaction32 __user *, oact)
{
struct k_sigaction new_ka, old_ka;
int ret;
.restart = __NR_O32_restart_syscall
};
-asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
- struct sigaction32 __user *oact,
- unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigaction, int, sig,
+ const struct sigaction32 __user *, act,
+ struct sigaction32 __user *, oact, unsigned int, sigsetsize)
{
struct k_sigaction new_sa, old_sa;
int ret = -EINVAL;
return ret;
}
-asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
- compat_sigset_t __user *oset, unsigned int sigsetsize)
+SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set,
+ compat_sigset_t __user *, oset, unsigned int, sigsetsize)
{
sigset_t old_set, new_set;
int ret;
return ret;
}
-asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset,
- unsigned int sigsetsize)
+SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset,
+ unsigned int, sigsetsize)
{
int ret;
sigset_t set;
return ret;
}
-asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig,
+ compat_siginfo_t __user *, uinfo)
{
siginfo_t info;
int ret;
return ret;
}
-asmlinkage long
-sys32_waitid(int which, compat_pid_t pid,
- compat_siginfo_t __user *uinfo, int options,
- struct compat_rusage __user *uru)
+SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid,
+ compat_siginfo_t __user *, uinfo, int, options,
+ struct compat_rusage __user *, uru)
{
siginfo_t info;
struct rusage ru;
return error;
}
-asmlinkage unsigned long
-old_mmap(unsigned long addr, unsigned long len, int prot,
- int flags, int fd, off_t offset)
+SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long,
+ fd, off_t, offset)
{
unsigned long result;
return result;
}
-asmlinkage unsigned long
-sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot,
- unsigned long flags, unsigned long fd, unsigned long pgoff)
+SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
{
if (pgoff & (~PAGE_MASK >> 12))
return -EINVAL;
/*
* Compacrapability ...
*/
-asmlinkage int sys_uname(struct old_utsname __user * name)
+SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
{
if (name && !copy_to_user(name, utsname(), sizeof (*name)))
return 0;
/*
* Compacrapability ...
*/
-asmlinkage int sys_olduname(struct oldold_utsname __user * name)
+SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
{
int error;
return error;
}
-asmlinkage int sys_set_thread_area(unsigned long addr)
+SYSCALL_DEFINE1(set_thread_area, unsigned long, addr)
{
struct thread_info *ti = task_thread_info(current);
return 0;
}
-asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
+asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3)
{
switch (cmd) {
case MIPS_ATOMIC_SET:
*
* This is really horribly ugly.
*/
-asmlinkage int sys_ipc(unsigned int call, int first, int second,
- unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+ unsigned long, third, void __user *, ptr, long, fifth)
{
int version, ret;
/*
* No implemented yet ...
*/
-asmlinkage int sys_cachectl(char *addr, int nbytes, int op)
+SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op)
{
return -ENOSYS;
}
#include <linux/linkage.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/syscalls.h>
#include <linux/mm.h>
#include <asm/cacheflush.h>
* We could optimize the case where the cache argument is not BCACHE but
* that seems very atypical use ...
*/
-asmlinkage int sys_cacheflush(unsigned long addr,
- unsigned long bytes, unsigned int cache)
+SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes,
+ unsigned int, cache)
{
if (bytes == 0)
return 0;
config MN10300
def_bool y
+ select HAVE_OPROFILE
config AM33
def_bool y
BRIDGEREGB(where) = value;
} else {
if (bus->number == 0 &&
- (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0))
)
__pcidebug("<= %02x", bus, devfn, where, value);
CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
compat_ulong_t __unused6;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_COMPAT_H */
#ifndef _ASM_POWERPC_SECCOMP_H
#define _ASM_POWERPC_SECCOMP_H
-#ifdef __KERNEL__
-#include <linux/thread_info.h>
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
unsigned int flags)
{
- char *ptr = (char *) ¤t->thread.TS_FPR(reg);
- int i, ret;
+ char *ptr0 = (char *) ¤t->thread.TS_FPR(reg);
+ char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1);
+ int i, ret, sw = 0;
if (!(flags & F))
return 0;
if (reg & 1)
return 0; /* invalid form: FRS/FRT must be even */
- if (!(flags & SW)) {
- /* not byte-swapped - easy */
- if (!(flags & ST))
- ret = __copy_from_user(ptr, addr, 16);
- else
- ret = __copy_to_user(addr, ptr, 16);
- } else {
- /* each FPR value is byte-swapped separately */
- ret = 0;
- for (i = 0; i < 16; ++i) {
- if (!(flags & ST))
- ret |= __get_user(ptr[i^7], addr + i);
- else
- ret |= __put_user(ptr[i^7], addr + i);
+ if (flags & SW)
+ sw = 7;
+ ret = 0;
+ for (i = 0; i < 8; ++i) {
+ if (!(flags & ST)) {
+ ret |= __get_user(ptr0[i^sw], addr + i);
+ ret |= __get_user(ptr1[i^sw], addr + i + 8);
+ } else {
+ ret |= __put_user(ptr0[i^sw], addr + i);
+ ret |= __put_user(ptr1[i^sw], addr + i + 8);
}
}
if (ret)
72: std r8,8(r3)
beq+ 3f
addi r3,r3,16
-23: ld r9,8(r4)
.Ldo_tail:
bf cr7*4+1,1f
- rotldi r9,r9,32
+23: lwz r9,8(r4)
+ addi r4,r4,4
73: stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
- rotldi r9,r9,16
+44: lhz r9,8(r4)
+ addi r4,r4,2
74: sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
- rotldi r9,r9,8
+45: lbz r9,8(r4)
75: stb r9,0(r3)
3: li r3,0
blr
6: cmpwi cr1,r5,8
addi r3,r3,32
sld r9,r9,r10
- ble cr1,.Ldo_tail
+ ble cr1,7f
34: ld r0,8(r4)
srd r7,r0,r11
or r9,r7,r9
- b .Ldo_tail
+7:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+94: stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+95: sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+96: stb r9,0(r3)
+3: li r3,0
+ blr
.Ldst_unaligned:
PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */
121:
132:
addi r3,r3,8
-123:
134:
135:
138:
140:
141:
142:
+123:
+144:
+145:
/*
* here we have had a fault on a load and r3 points to the first
187:
188:
189:
+194:
+195:
+196:
1:
ld r6,-24(r1)
ld r5,-8(r1)
.llong 72b,172b
.llong 23b,123b
.llong 73b,173b
+ .llong 44b,144b
.llong 74b,174b
+ .llong 45b,145b
.llong 75b,175b
.llong 24b,124b
.llong 25b,125b
.llong 79b,179b
.llong 80b,180b
.llong 34b,134b
+ .llong 94b,194b
+ .llong 95b,195b
+ .llong 96b,196b
.llong 35b,135b
.llong 81b,181b
.llong 36b,136b
3: std r8,8(r3)
beq 3f
addi r3,r3,16
- ld r9,8(r4)
.Ldo_tail:
bf cr7*4+1,1f
- rotldi r9,r9,32
+ lwz r9,8(r4)
+ addi r4,r4,4
stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
- rotldi r9,r9,16
+ lhz r9,8(r4)
+ addi r4,r4,2
sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
- rotldi r9,r9,8
+ lbz r9,8(r4)
stb r9,0(r3)
3: ld r3,48(r1) /* return dest pointer */
blr
cmpwi cr1,r5,8
addi r3,r3,32
sld r9,r9,r10
- ble cr1,.Ldo_tail
+ ble cr1,6f
ld r0,8(r4)
srd r7,r0,r11
or r9,r7,r9
- b .Ldo_tail
+6:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+ stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+ sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+ stb r9,0(r3)
+3: ld r3,48(r1) /* return dest pointer */
+ blr
.Ldst_unaligned:
PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7
{
unsigned int val;
+ /* Do not do the fixup on other platforms! */
+ if (!machine_is(gef_sbc610))
+ return;
+
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
/* Ensure ports 1, 2, 3, 4 & 5 are enabled */
{
u32 ma, pcila, pciha;
+ /* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+ * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+ * address are actually hard wired to a value that appears to depend
+ * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+ *
+ * The trick here is we just crop those top bits and ignore them when
+ * programming the chip. That means the device-tree has to be right
+ * for the specific part used (we don't print a warning if it's wrong
+ * but on the other hand, you'll crash quickly enough), but at least
+ * this code should work whatever the hard coded value is
+ */
+ plb_addr &= 0xffffffffull;
+
+ /* Note: Due to the above hack, the test below doesn't actually test
+ * if you address is above 4G, but it tests that address and
+ * (address + size) are both contained in the same 4G
+ */
if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
size < 0x1000 || (plb_addr & (size - 1)) != 0) {
printk(KERN_WARNING "%s: Resource out of range\n",
module_init(aes_s390_init);
module_exit(aes_s390_fini);
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
MODULE_LICENSE("GPL");
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
-#include <media/ov772x.h>
#include <media/soc_camera_platform.h>
#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
}
#ifdef CONFIG_I2C
-/* support for the old ncm03j camera */
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
};
-static int camera_probe(void)
-{
- struct i2c_adapter *a = i2c_get_adapter(0);
- struct i2c_msg msg;
- int ret;
-
- camera_power(1);
- msg.addr = 0x6e;
- msg.buf = camera_ncm03j_magic;
- msg.len = 2;
- msg.flags = 0;
- ret = i2c_transfer(a, &msg, 1);
- camera_power(0);
-
- return ret;
-}
-
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
{
.platform_data = &camera_info,
},
};
-
-static int __init camera_setup(void)
-{
- if (camera_probe() > 0)
- platform_device_register(&camera_device);
-
- return 0;
-}
-late_initcall(camera_setup);
-
#endif /* CONFIG_I2C */
-static int ov7725_power(struct device *dev, int mode)
-{
- camera_power(0);
- if (mode)
- camera_power(1);
-
- return 0;
-}
-
-static struct ov772x_camera_info ov7725_info = {
- .buswidth = SOCAM_DATAWIDTH_8,
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
- .link = {
- .power = ov7725_power,
- },
-};
-
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
+#ifdef CONFIG_I2C
+ &camera_device,
+#endif
&nand_flash_device,
&sdcard_cn3_device,
};
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
- {
- I2C_BOARD_INFO("ov772x", 0x21),
- .platform_data = &ov7725_info,
- },
};
static struct spi_board_info ap325rxa_spi_devices[] = {
#include <asm/freq.h>
#include <asm/io.h>
-const static int pll1rate[]={1,2,3,4,6,8};
-const static int pfc_divisors[]={1,2,3,4,6,8,12};
+static const int pll1rate[]={1,2,3,4,6,8};
+static const int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
unsigned int __unused2;
};
+static inline int is_compat_task(void)
+{
+ return test_thread_flag(TIF_32BIT);
+}
+
#endif /* _ASM_SPARC64_COMPAT_H */
#ifndef _ASM_SECCOMP_H
-#include <linux/thread_info.h> /* already defines TIF_32BIT */
-
-#ifndef TIF_32BIT
-#error "unexpected TIF_32BIT on sparc64"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
buf[1] = '?';
buf[2] = '?';
buf[3] = '\0';
+ return 0;
}
p = dp->controller;
prop = &p->layout;
{
struct vde_open_args *args;
- vpri->args = kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
+ vpri->args = uml_kmalloc(sizeof(struct vde_open_args), UM_GFP_KERNEL);
if (vpri->args == NULL) {
printk(UM_KERN_ERR "vde_init_libstuff - vde_open_args "
"allocation failed");
args->group = init->group;
args->mode = init->mode ? init->mode : 0700;
- args->port ? printk(UM_KERN_INFO "port %d", args->port) :
- printk(UM_KERN_INFO "undefined port");
+ args->port ? printk("port %d", args->port) :
+ printk("undefined port");
}
int vde_user_read(void *conn, void *buf, int len)
remapping devices.
config DMAR_DEFAULT_ON
- def_bool n
+ def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+int
+is_io_mapping_possible(resource_size_t base, unsigned long size);
+
void *
iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
#ifndef _ASM_X86_SECCOMP_32_H
#define _ASM_X86_SECCOMP_32_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on i386"
-#endif
-
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#ifndef _ASM_X86_SECCOMP_64_H
#define _ASM_X86_SECCOMP_64_H
-#include <linux/thread_info.h>
-
-#ifdef TIF_32BIT
-#error "unexpected TIF_32BIT on x86_64"
-#else
-#define TIF_32BIT TIF_IA32
-#endif
-
#include <linux/unistd.h>
#include <asm/ia32_unistd.h>
* Hooray, we are in Long 64-bit mode (but still running in low memory)
*/
ENTRY(wakeup_long64)
-wakeup_long64:
movq saved_magic, %rax
movq $0x123456789abcdef0, %rdx
cmpq %rdx, %rax
movq saved_rip, %rax
jmp *%rax
+ENDPROC(wakeup_long64)
bogus_64_magic:
jmp bogus_64_magic
- .align 2
- .p2align 4,,15
-.globl do_suspend_lowlevel
- .type do_suspend_lowlevel,@function
-do_suspend_lowlevel:
-.LFB5:
+ENTRY(do_suspend_lowlevel)
subq $8, %rsp
xorl %eax, %eax
call save_processor_state
pushfq
popq pt_regs_flags(%rax)
- movq $.L97, saved_rip(%rip)
+ movq $resume_point, saved_rip(%rip)
movq %rsp, saved_rsp
movq %rbp, saved_rbp
addq $8, %rsp
movl $3, %edi
xorl %eax, %eax
- jmp acpi_enter_sleep_state
-.L97:
- .p2align 4,,7
-.L99:
- .align 4
- movl $24, %eax
- movw %ax, %ds
+ call acpi_enter_sleep_state
+ /* in case something went wrong, restore the machine status and go on */
+ jmp resume_point
+ .align 4
+resume_point:
/* We don't restore %rax, it must be 0 anyway */
movq $saved_context, %rax
movq saved_context_cr4(%rax), %rbx
xorl %eax, %eax
addq $8, %rsp
jmp restore_processor_state
-.LFE5:
-.Lfe5:
- .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
-
+ENDPROC(do_suspend_lowlevel)
+
.data
-ALIGN
ENTRY(saved_rbp) .quad 0
ENTRY(saved_rsi) .quad 0
ENTRY(saved_rdi) .quad 0
device_suspend(PMSG_SUSPEND);
local_irq_disable();
device_power_down(PMSG_SUSPEND);
+ sysdev_suspend(PMSG_SUSPEND);
local_irq_enable();
if (err != APM_SUCCESS)
apm_error("suspend", err);
err = (err == APM_SUCCESS) ? 0 : -EIO;
+ sysdev_resume();
device_power_up(PMSG_RESUME);
local_irq_enable();
device_resume(PMSG_RESUME);
local_irq_disable();
device_power_down(PMSG_SUSPEND);
+ sysdev_suspend(PMSG_SUSPEND);
local_irq_enable();
err = set_system_power_state(APM_STATE_STANDBY);
apm_error("standby", err);
local_irq_disable();
+ sysdev_resume();
device_power_up(PMSG_RESUME);
local_irq_enable();
}
}
-static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
+static void mce_cpu_features(struct cpuinfo_x86 *c)
{
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
}
/* cpu init entry point, called from mce.c with preempt off */
-void __cpuinit mce_amd_feature_init(struct cpuinfo_x86 *c)
+void mce_amd_feature_init(struct cpuinfo_x86 *c)
{
unsigned int bank, block;
unsigned int cpu = smp_processor_id();
irq_exit();
}
-static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
+static void intel_init_thermal(struct cpuinfo_x86 *c)
{
u32 l, h;
int tm2 = 0;
return;
}
-void __cpuinit mce_intel_feature_init(struct cpuinfo_x86 *c)
+void mce_intel_feature_init(struct cpuinfo_x86 *c)
{
intel_init_thermal(c);
}
#ifdef CONFIG_X86_32
# define IS_IA32 1
#elif defined CONFIG_IA32_EMULATION
-# define IS_IA32 test_thread_flag(TIF_IA32)
+# define IS_IA32 is_compat_task()
#else
# define IS_IA32 0
#endif
static struct irqaction irq0 = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER,
.mask = CPU_MASK_NONE,
.name = "timer"
};
static struct irqaction vmi_clock_action = {
.name = "vmi-timer",
.handler = vmi_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
.mask = CPU_MASK_ALL,
};
#endif
/** vmi clocksource */
+static struct clocksource clocksource_vmi;
static cycle_t read_real_cycles(void)
{
- return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+ cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
+ return ret >= clocksource_vmi.cycle_last ?
+ ret : clocksource_vmi.cycle_last;
}
static struct clocksource clocksource_vmi = {
static struct irqaction irq0 = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
.mask = CPU_MASK_NONE,
.name = "timer"
};
static struct irqaction irq0 = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER,
.mask = CPU_MASK_NONE,
.name = "timer"
};
/* Bitmask of CPUs present in the system - exported by i386_syms.c, used
* by scheduler but indexed physically */
-cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE;
/* The internal functions */
static void send_CPI(__u32 cpuset, __u8 cpi);
/* set up everything for just this CPU, we can alter
* this as we start the other CPUs later */
/* now get the CPU disposition from the extended CMOS */
- cpus_addr(phys_cpu_present_map)[0] =
+ cpus_addr(voyager_phys_cpu_present_map)[0] =
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK);
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
2) << 16;
- cpus_addr(phys_cpu_present_map)[0] |=
+ cpus_addr(voyager_phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
3) << 24;
- init_cpu_possible(&phys_cpu_present_map);
- printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
- cpus_addr(phys_cpu_present_map)[0]);
+ init_cpu_possible(&voyager_phys_cpu_present_map);
+ printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n",
+ cpus_addr(voyager_phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
/* enable the CPIs by writing the base vector to their register */
outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER);
/* now that the cat has probed the Voyager System Bus, sanity
* check the cpu map */
if (((voyager_quad_processors | voyager_extended_vic_processors)
- & cpus_addr(phys_cpu_present_map)[0]) !=
- cpus_addr(phys_cpu_present_map)[0]) {
+ & cpus_addr(voyager_phys_cpu_present_map)[0]) !=
+ cpus_addr(voyager_phys_cpu_present_map)[0]) {
/* should panic */
printk("\n\n***WARNING*** "
"Sanity check of CPU present map FAILED\n");
}
} else if (voyager_level == 4)
voyager_extended_vic_processors =
- cpus_addr(phys_cpu_present_map)[0];
+ cpus_addr(voyager_phys_cpu_present_map)[0];
/* this sets up the idle task to run on the current cpu */
voyager_extended_cpus = 1;
/* loop over all the extended VIC CPUs and boot them. The
* Quad CPUs must be bootstrapped by their extended VIC cpu */
for (i = 0; i < nr_cpu_ids; i++) {
- if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map))
+ if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map))
continue;
do_boot_cpu(i);
/* This udelay seems to be needed for the Quad boots
pos = start_pfn << PAGE_SHIFT;
end_pfn = ((pos + (PMD_SIZE - 1)) >> PMD_SHIFT)
<< (PMD_SHIFT - PAGE_SHIFT);
+ if (end_pfn > (end >> PAGE_SHIFT))
+ end_pfn = end >> PAGE_SHIFT;
if (start_pfn < end_pfn) {
nr_range = save_mr(mr, nr_range, start_pfn, end_pfn, 0);
pos = end_pfn << PAGE_SHIFT;
#include <asm/pat.h>
#include <linux/module.h>
+int is_io_mapping_possible(resource_size_t base, unsigned long size)
+{
+#ifndef CONFIG_X86_PAE
+ /* There is no way to map greater than 1 << 32 address without PAE */
+ if (base + size > 0x100000000ULL)
+ return 0;
+#endif
+ return 1;
+}
+EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+
/* Map 'pfn' using fixed map 'type' and protections 'prot'
*/
void *
struct list_head list;
struct kmmio_fault_page *release_next;
unsigned long page; /* location of the fault page */
+ bool old_presence; /* page presence prior to arming */
+ bool armed;
/*
* Number of times this page has been registered as a part
* of a probe. If zero, page is disarmed and this may be freed.
- * Used only by writers (RCU).
+ * Used only by writers (RCU) and post_kmmio_handler().
+ * Protected by kmmio_lock, when linked into kmmio_page_table.
*/
int count;
};
return NULL;
}
-static void set_page_present(unsigned long addr, bool present,
- unsigned int *pglevel)
+static void set_pmd_presence(pmd_t *pmd, bool present, bool *old)
+{
+ pmdval_t v = pmd_val(*pmd);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pmd(pmd, __pmd(v));
+}
+
+static void set_pte_presence(pte_t *pte, bool present, bool *old)
+{
+ pteval_t v = pte_val(*pte);
+ *old = !!(v & _PAGE_PRESENT);
+ v &= ~_PAGE_PRESENT;
+ if (present)
+ v |= _PAGE_PRESENT;
+ set_pte_atomic(pte, __pte(v));
+}
+
+static int set_page_presence(unsigned long addr, bool present, bool *old)
{
- pteval_t pteval;
- pmdval_t pmdval;
unsigned int level;
- pmd_t *pmd;
pte_t *pte = lookup_address(addr, &level);
if (!pte) {
pr_err("kmmio: no pte for page 0x%08lx\n", addr);
- return;
+ return -1;
}
- if (pglevel)
- *pglevel = level;
-
switch (level) {
case PG_LEVEL_2M:
- pmd = (pmd_t *)pte;
- pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT;
- if (present)
- pmdval |= _PAGE_PRESENT;
- set_pmd(pmd, __pmd(pmdval));
+ set_pmd_presence((pmd_t *)pte, present, old);
break;
-
case PG_LEVEL_4K:
- pteval = pte_val(*pte) & ~_PAGE_PRESENT;
- if (present)
- pteval |= _PAGE_PRESENT;
- set_pte_atomic(pte, __pte(pteval));
+ set_pte_presence(pte, present, old);
break;
-
default:
pr_err("kmmio: unexpected page level 0x%x.\n", level);
- return;
+ return -1;
}
__flush_tlb_one(addr);
+ return 0;
}
-/** Mark the given page as not present. Access to it will trigger a fault. */
-static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/*
+ * Mark the given page as not present. Access to it will trigger a fault.
+ *
+ * Struct kmmio_fault_page is protected by RCU and kmmio_lock, but the
+ * protection is ignored here. RCU read lock is assumed held, so the struct
+ * will not disappear unexpectedly. Furthermore, the caller must guarantee,
+ * that double arming the same virtual address (page) cannot occur.
+ *
+ * Double disarming on the other hand is allowed, and may occur when a fault
+ * and mmiotrace shutdown happen simultaneously.
+ */
+static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, false, pglevel);
+ int ret;
+ WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n");
+ if (f->armed) {
+ pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n",
+ f->page, f->count, f->old_presence);
+ }
+ ret = set_page_presence(f->page, false, &f->old_presence);
+ WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page);
+ f->armed = true;
+ return ret;
}
-/** Mark the given page as present. */
-static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel)
+/** Restore the given page to saved presence state. */
+static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
{
- set_page_present(page & PAGE_MASK, true, pglevel);
+ bool tmp;
+ int ret = set_page_presence(f->page, f->old_presence, &tmp);
+ WARN_ONCE(ret < 0,
+ KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+ f->armed = false;
}
/*
ctx = &get_cpu_var(kmmio_ctx);
if (ctx->active) {
- disarm_kmmio_fault_page(faultpage->page, NULL);
if (addr == ctx->addr) {
/*
- * On SMP we sometimes get recursive probe hits on the
- * same address. Context is already saved, fall out.
+ * A second fault on the same page means some other
+ * condition needs handling by do_page_fault(), the
+ * page really not being present is the most common.
*/
- pr_debug("kmmio: duplicate probe hit on CPU %d, for "
- "address 0x%08lx.\n",
- smp_processor_id(), addr);
- ret = 1;
- goto no_kmmio_ctx;
- }
- /*
- * Prevent overwriting already in-flight context.
- * This should not happen, let's hope disarming at least
- * prevents a panic.
- */
- pr_emerg("kmmio: recursive probe hit on CPU %d, "
+ pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n",
+ addr, smp_processor_id());
+
+ if (!faultpage->old_presence)
+ pr_info("kmmio: unexpected secondary hit for "
+ "address 0x%08lx on CPU %d.\n", addr,
+ smp_processor_id());
+ } else {
+ /*
+ * Prevent overwriting already in-flight context.
+ * This should not happen, let's hope disarming at
+ * least prevents a panic.
+ */
+ pr_emerg("kmmio: recursive probe hit on CPU %d, "
"for address 0x%08lx. Ignoring.\n",
smp_processor_id(), addr);
- pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
- ctx->addr);
+ pr_emerg("kmmio: previous hit was at 0x%08lx.\n",
+ ctx->addr);
+ disarm_kmmio_fault_page(faultpage);
+ }
goto no_kmmio_ctx;
}
ctx->active++;
regs->flags &= ~X86_EFLAGS_IF;
/* Now we set present bit in PTE and single step. */
- disarm_kmmio_fault_page(ctx->fpage->page, NULL);
+ disarm_kmmio_fault_page(ctx->fpage);
/*
* If another cpu accesses the same page while we are stepping,
struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx);
if (!ctx->active) {
- pr_debug("kmmio: spurious debug trap on CPU %d.\n",
+ pr_warning("kmmio: spurious debug trap on CPU %d.\n",
smp_processor_id());
goto out;
}
if (ctx->probe && ctx->probe->post_handler)
ctx->probe->post_handler(ctx->probe, condition, regs);
- arm_kmmio_fault_page(ctx->fpage->page, NULL);
+ /* Prevent racing against release_kmmio_fault_page(). */
+ spin_lock(&kmmio_lock);
+ if (ctx->fpage->count)
+ arm_kmmio_fault_page(ctx->fpage);
+ spin_unlock(&kmmio_lock);
regs->flags &= ~X86_EFLAGS_TF;
regs->flags |= ctx->saved_flags;
f = get_kmmio_fault_page(page);
if (f) {
if (!f->count)
- arm_kmmio_fault_page(f->page, NULL);
+ arm_kmmio_fault_page(f);
f->count++;
return 0;
}
- f = kmalloc(sizeof(*f), GFP_ATOMIC);
+ f = kzalloc(sizeof(*f), GFP_ATOMIC);
if (!f)
return -1;
f->count = 1;
f->page = page;
- list_add_rcu(&f->list, kmmio_page_list(f->page));
- arm_kmmio_fault_page(f->page, NULL);
+ if (arm_kmmio_fault_page(f)) {
+ kfree(f);
+ return -1;
+ }
+
+ list_add_rcu(&f->list, kmmio_page_list(f->page));
return 0;
}
f->count--;
BUG_ON(f->count < 0);
if (!f->count) {
- disarm_kmmio_fault_page(f->page, NULL);
+ disarm_kmmio_fault_page(f);
f->release_next = *release_list;
*release_list = f;
}
#endif
/*
- * Install the new, split up pagetable. Important details here:
+ * Install the new, split up pagetable.
*
- * On Intel the NX bit of all levels must be cleared to make a
- * page executable. See section 4.13.2 of Intel 64 and IA-32
- * Architectures Software Developer's Manual).
- *
- * Mark the entry present. The current mapping might be
- * set to not present, which we preserved above.
+ * We use the standard kernel pagetable protections for the new
+ * pagetable protections, the actual ptes set above control the
+ * primary protection behavior:
*/
- ref_prot = pte_pgprot(pte_mkexec(pte_clrhuge(*kpte)));
- pgprot_val(ref_prot) |= _PAGE_PRESENT;
- __set_pmd_pte(kpte, address, mk_pte(base, ref_prot));
+ __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
base = NULL;
out_unlock:
#include <linux/bootmem.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/fs.h>
else
return pgprot_noncached(prot);
}
+EXPORT_SYMBOL_GPL(pgprot_writecombine);
#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_X86_PAT)
/*
- * Written by Pekka Paalanen, 2008 <pq@iki.fi>
+ * Written by Pekka Paalanen, 2008
-2009 <pq@iki.fi>
*/
#include <linux/module.h>
#include <linux/io.h>
static unsigned long mmio_address;
module_param(mmio_address, ulong, 0);
-MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB.");
+MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
+ "(or 8 MB if read_far is non-zero).");
+
+static unsigned long read_far = 0x400100;
+module_param(read_far, ulong, 0);
+MODULE_PARM_DESC(read_far, " Offset of a 32-bit read within 8 MB "
+ "(default: 0x400100).");
+
+static unsigned v16(unsigned i)
+{
+ return i * 12 + 7;
+}
+
+static unsigned v32(unsigned i)
+{
+ return i * 212371 + 13;
+}
static void do_write_test(void __iomem *p)
{
unsigned int i;
+ pr_info(MODULE_NAME ": write test.\n");
mmiotrace_printk("Write test.\n");
+
for (i = 0; i < 256; i++)
iowrite8(i, p + i);
+
for (i = 1024; i < (5 * 1024); i += 2)
- iowrite16(i * 12 + 7, p + i);
+ iowrite16(v16(i), p + i);
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- iowrite32(i * 212371 + 13, p + i);
+ iowrite32(v32(i), p + i);
}
static void do_read_test(void __iomem *p)
{
unsigned int i;
+ unsigned errs[3] = { 0 };
+ pr_info(MODULE_NAME ": read test.\n");
mmiotrace_printk("Read test.\n");
+
for (i = 0; i < 256; i++)
- ioread8(p + i);
+ if (ioread8(p + i) != i)
+ ++errs[0];
+
for (i = 1024; i < (5 * 1024); i += 2)
- ioread16(p + i);
+ if (ioread16(p + i) != v16(i))
+ ++errs[1];
+
for (i = (5 * 1024); i < (16 * 1024); i += 4)
- ioread32(p + i);
+ if (ioread32(p + i) != v32(i))
+ ++errs[2];
+
+ mmiotrace_printk("Read errors: 8-bit %d, 16-bit %d, 32-bit %d.\n",
+ errs[0], errs[1], errs[2]);
}
-static void do_test(void)
+static void do_read_far_test(void __iomem *p)
{
- void __iomem *p = ioremap_nocache(mmio_address, 0x4000);
+ pr_info(MODULE_NAME ": read far test.\n");
+ mmiotrace_printk("Read far test.\n");
+
+ ioread32(p + read_far);
+}
+
+static void do_test(unsigned long size)
+{
+ void __iomem *p = ioremap_nocache(mmio_address, size);
if (!p) {
pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
return;
mmiotrace_printk("ioremap returned %p.\n", p);
do_write_test(p);
do_read_test(p);
+ if (read_far && read_far < size - 4)
+ do_read_far_test(p);
iounmap(p);
}
static int __init init(void)
{
+ unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
+
if (mmio_address == 0) {
pr_err(MODULE_NAME ": you have to use the module argument "
"mmio_address.\n");
return -ENXIO;
}
- pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx "
- "in PCI address space, and writing "
- "rubbish in there.\n", mmio_address);
- do_test();
+ pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
+ "address space, and writing 16 kB of rubbish in there.\n",
+ size >> 10, mmio_address);
+ do_test(size);
+ pr_info(MODULE_NAME ": All done.\n");
return 0;
}
if (cpu_has_arch_perfmon) {
union cpuid10_eax eax;
eax.full = cpuid_eax(0xa);
- if (counter_width < eax.split.bit_width)
- counter_width = eax.split.bit_width;
+
+ /*
+ * For Core2 (family 6, model 15), don't reset the
+ * counter width:
+ */
+ if (!(eax.split.version_id == 0 &&
+ current_cpu_data.x86 == 6 &&
+ current_cpu_data.x86_model == 15)) {
+
+ if (counter_width < eax.split.bit_width)
+ counter_width = eax.split.bit_width;
+ }
}
/* clear all counters */
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
+ local_irq_disable();
+ early_boot_irqs_off();
+
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
}
}
-void blk_recalc_rq_segments(struct request *rq)
+static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
+ struct bio *bio,
+ unsigned int *seg_size_ptr)
{
- int nr_phys_segs;
unsigned int phys_size;
struct bio_vec *bv, *bvprv = NULL;
- int seg_size;
- int cluster;
- struct req_iterator iter;
- int high, highprv = 1;
- struct request_queue *q = rq->q;
+ int cluster, i, high, highprv = 1;
+ unsigned int seg_size, nr_phys_segs;
+ struct bio *fbio;
- if (!rq->bio)
- return;
+ if (!bio)
+ return 0;
+ fbio = bio;
cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
seg_size = 0;
phys_size = nr_phys_segs = 0;
- rq_for_each_segment(bv, rq, iter) {
- /*
- * the trick here is making sure that a high page is never
- * considered part of another segment, since that might
- * change with the bounce page.
- */
- high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
- if (high || highprv)
- goto new_segment;
- if (cluster) {
- if (seg_size + bv->bv_len > q->max_segment_size)
- goto new_segment;
- if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
- goto new_segment;
- if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+ for_each_bio(bio) {
+ bio_for_each_segment(bv, bio, i) {
+ /*
+ * the trick here is making sure that a high page is
+ * never considered part of another segment, since that
+ * might change with the bounce page.
+ */
+ high = page_to_pfn(bv->bv_page) > q->bounce_pfn;
+ if (high || highprv)
goto new_segment;
+ if (cluster) {
+ if (seg_size + bv->bv_len > q->max_segment_size)
+ goto new_segment;
+ if (!BIOVEC_PHYS_MERGEABLE(bvprv, bv))
+ goto new_segment;
+ if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bv))
+ goto new_segment;
+
+ seg_size += bv->bv_len;
+ bvprv = bv;
+ continue;
+ }
+new_segment:
+ if (nr_phys_segs == 1 && seg_size >
+ fbio->bi_seg_front_size)
+ fbio->bi_seg_front_size = seg_size;
- seg_size += bv->bv_len;
+ nr_phys_segs++;
bvprv = bv;
- continue;
+ seg_size = bv->bv_len;
+ highprv = high;
}
-new_segment:
- if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
- rq->bio->bi_seg_front_size = seg_size;
-
- nr_phys_segs++;
- bvprv = bv;
- seg_size = bv->bv_len;
- highprv = high;
}
- if (nr_phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
+ if (seg_size_ptr)
+ *seg_size_ptr = seg_size;
+
+ return nr_phys_segs;
+}
+
+void blk_recalc_rq_segments(struct request *rq)
+{
+ unsigned int seg_size = 0, phys_segs;
+
+ phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
+
+ if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
rq->bio->bi_seg_front_size = seg_size;
if (seg_size > rq->biotail->bi_seg_back_size)
rq->biotail->bi_seg_back_size = seg_size;
- rq->nr_phys_segments = nr_phys_segs;
+ rq->nr_phys_segments = phys_segs;
}
void blk_recount_segments(struct request_queue *q, struct bio *bio)
{
- struct request rq;
struct bio *nxt = bio->bi_next;
- rq.q = q;
- rq.bio = rq.biotail = bio;
+
bio->bi_next = NULL;
- blk_recalc_rq_segments(&rq);
+ bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
bio->bi_next = nxt;
- bio->bi_phys_segments = rq.nr_phys_segments;
bio->bi_flags |= (1 << BIO_SEG_VALID);
}
EXPORT_SYMBOL(blk_recount_segments);
}
#endif /* CONFIG_PROC_FS */
+/**
+ * register_blkdev - register a new block device
+ *
+ * @major: the requested major device number [1..255]. If @major=0, try to
+ * allocate any unused major number.
+ * @name: the name of the new block device as a zero terminated string
+ *
+ * The @name must be unique within the system.
+ *
+ * The return value depends on the @major input parameter.
+ * - if a major device number was requested in range [1..255] then the
+ * function returns zero on success, or a negative error code
+ * - if any unused major number was requested with @major=0 parameter
+ * then the return value is the allocated major number in range
+ * [1..255] or a negative error code otherwise
+ */
int register_blkdev(unsigned int major, const char *name)
{
struct blk_major_name **n, *p;
seq_printf(m, "async : %s\n", alg->cra_flags & CRYPTO_ALG_ASYNC ?
"yes" : "no");
seq_printf(m, "blocksize : %u\n", alg->cra_blocksize);
- seq_printf(m, "digestsize : %u\n", alg->cra_hash.digestsize);
+ seq_printf(m, "digestsize : %u\n", alg->cra_ahash.digestsize);
}
const struct crypto_type crypto_ahash_type = {
mask &= ~(CRYPTO_ALG_LARVAL | CRYPTO_ALG_DEAD);
type &= mask;
- alg = try_then_request_module(crypto_alg_lookup(name, type, mask),
- name);
+ alg = crypto_alg_lookup(name, type, mask);
+ if (!alg) {
+ char tmp[CRYPTO_MAX_ALG_NAME];
+
+ request_module(name);
+
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
+ request_module(tmp);
+
+ alg = crypto_alg_lookup(name, type, mask);
+ }
+
if (alg)
return crypto_is_larval(alg) ? crypto_larval_wait(alg) : alg;
help you correlate PCI bus addresses with the physical geography
of your slots. If you are unsure, say N.
-config ACPI_SYSTEM
- bool
- default y
- help
- This driver will enable your system to shut down using ACPI, and
- dump your ACPI DSDT table using /proc/acpi/dsdt.
-
config X86_PM_TIMER
bool "Power Management Timer Support" if EMBEDDED
depends on X86
obj-$(CONFIG_ACPI_CONTAINER) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
obj-y += power.o
-obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
+obj-y += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
static int acpi_battery_get_state(struct acpi_battery *battery);
+static int acpi_battery_is_charged(struct acpi_battery *battery)
+{
+ /* either charging or discharging */
+ if (battery->state != 0)
+ return 0;
+
+ /* battery not reporting charge */
+ if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN ||
+ battery->capacity_now == 0)
+ return 0;
+
+ /* good batteries update full_charge as the batteries degrade */
+ if (battery->full_charge_capacity == battery->capacity_now)
+ return 1;
+
+ /* fallback to using design values for broken batteries */
+ if (battery->design_capacity == battery->capacity_now)
+ return 1;
+
+ /* we don't do any sort of metric based on percentages */
+ return 0;
+}
+
static int acpi_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (battery->state & 0x02)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (battery->state == 0)
+ else if (acpi_battery_is_charged(battery))
val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
spinlock_t curr_lock;
} *boot_ec, *first_ec;
+static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+
/* --------------------------------------------------------------------------
Transaction Management
-------------------------------------------------------------------------- */
clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_disable_gpe(NULL, ec->gpe);
}
+ if (EC_FLAGS_MSI)
+ udelay(ACPI_EC_DELAY);
/* start transaction */
spin_lock_irqsave(&ec->curr_lock, tmp);
/* following two actions should be kept atomic */
/*
* Generate a boot ec context
*/
+ if (dmi_name_in_vendors("Micro-Star") ||
+ dmi_name_in_vendors("Notebook")) {
+ pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
+ EC_FLAGS_MSI = 1;
+ }
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.11"
+#define DRV_VERSION "0.4.1"
/**
* timing_setup - shared timing computation and load
return ata_sff_prereset(link, deadline);
}
+/**
+ * amd_cable_detect - report cable type
+ * @ap: port
+ *
+ * AMD controller/BIOS setups record the cable type in word 0x42
+ */
+
static int amd_cable_detect(struct ata_port *ap)
{
static const u32 bitmask[2] = {0x03, 0x0C};
return ATA_CBL_PATA40;
}
+/**
+ * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Set the PCI fifo for this device according to the devices present
+ * on the bus at this point in time. We need to turn the post write buffer
+ * off for ATAPI devices as we may need to issue a word sized write to the
+ * device as the final I/O
+ */
+
+static void amd_fifo_setup(struct ata_port *ap)
+{
+ struct ata_device *adev;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const u8 fifobit[2] = { 0xC0, 0x30};
+ u8 fifo = fifobit[ap->port_no];
+ u8 r;
+
+
+ ata_for_each_dev(adev, &ap->link, ENABLED) {
+ if (adev->class == ATA_DEV_ATAPI)
+ fifo = 0;
+ }
+ if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */
+ fifo = 0;
+
+ /* On the later chips the read prefetch bits become no-op bits */
+ pci_read_config_byte(pdev, 0x41, &r);
+ r &= ~fifobit[ap->port_no];
+ r |= fifo;
+ pci_write_config_byte(pdev, 0x41, r);
+}
+
/**
* amd33_set_piomode - set initial PIO mode data
* @ap: ATA interface
static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
}
static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
}
static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
}
static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ amd_fifo_setup(ap);
timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
}
.set_dmamode = nv133_set_dmamode,
};
+static void amd_clear_fifo(struct pci_dev *pdev)
+{
+ u8 fifo;
+ /* Disable the FIFO, the FIFO logic will re-enable it as
+ appropriate */
+ pci_read_config_byte(pdev, 0x41, &fifo);
+ fifo &= 0x0F;
+ pci_write_config_byte(pdev, 0x41, fifo);
+}
+
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info[10] = {
if (type < 3)
ata_pci_bmdma_clear_simplex(pdev);
-
- /* Check for AMD7411 */
- if (type == 3)
- /* FIFO is broken */
- pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
- else
- pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
-
+ if (pdev->vendor == PCI_VENDOR_ID_AMD)
+ amd_clear_fifo(pdev);
/* Cable detection on Nvidia chips doesn't work too well,
* cache BIOS programmed UDMA mode.
*/
return rc;
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
- u8 fifo;
- pci_read_config_byte(pdev, 0x41, &fifo);
- if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
- /* FIFO is broken */
- pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
- else
- pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+ amd_clear_fifo(pdev);
if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
ata_pci_bmdma_clear_simplex(pdev);
}
-
ata_host_resume(host);
return 0;
}
id[83] |= 0x4400; /* Word 83 is valid and LBA48 */
id[86] |= 0x0400; /* LBA48 on */
id[ATA_ID_MAJOR_VER] |= 0x1F;
+ /* Clear the serial number because it's different each boot
+ which breaks validation on resume */
+ memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN);
}
return err_mask;
}
static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
{
- if (ata_id_has_dword_io(dev->id)) {
+ int slop = buflen & 3;
+ /* 32bit I/O capable *and* we need to write a whole number of dwords */
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
unsigned long flags;
local_irq_save(flags);
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (!IS_SOC(hpriv)) {
- /* Clear any currently outstanding host interrupt conditions */
- writelfl(0, mmio + hpriv->irq_cause_ofs);
+ /* Clear any currently outstanding host interrupt conditions */
+ writelfl(0, mmio + hpriv->irq_cause_ofs);
- /* and unmask interrupt generation for host regs */
- writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+ /* and unmask interrupt generation for host regs */
+ writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
- /*
- * enable only global host interrupts for now.
- * The per-port interrupts get done later as ports are set up.
- */
- mv_set_main_irq_mask(host, 0, PCI_ERR);
- }
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
done:
return rc;
}
clock_l(); udelay(5);
for (i = 128; i != 0; i >>= 1) { /* write command out */
tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
- (data & i) ? CONFIG1_PROMDATA : 0;
+ ((data & i) ? CONFIG1_PROMDATA : 0);
if (lanai->conf1 != tmp) {
set_config1(tmp);
udelay(5); /* Let new data settle */
extern int driver_probe_device(struct device_driver *drv, struct device *dev);
extern void sysdev_shutdown(void);
-extern int sysdev_suspend(pm_message_t state);
-extern int sysdev_resume(void);
extern char *make_class_name(const char *name, struct kobject *kobj);
*/
#include <linux/device.h>
+#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/wait.h>
+#include <linux/async.h>
#include "base.h"
#include "power/power.h"
return 0;
}
+/**
+ * wait_for_device_probe
+ * Wait for device probing to be completed.
+ *
+ * Note: this function polls at 100 msec intervals.
+ */
+int wait_for_device_probe(void)
+{
+ /* wait for the known devices to complete their probing */
+ while (driver_probe_done() != 0)
+ msleep(100);
+ async_synchronize_full();
+ return 0;
+}
+
/**
* driver_probe_device - attempt to bind device & driver together
* @drv: driver to bind a device to
*/
void device_power_up(pm_message_t state)
{
- sysdev_resume();
dpm_power_up(state);
}
EXPORT_SYMBOL_GPL(device_power_up);
}
dev->power.status = DPM_OFF_IRQ;
}
- if (!error)
- error = sysdev_suspend(state);
if (error)
dpm_power_up(resume_event(state));
return error;
* is guaranteed by virtue of the fact that child devices are registered
* after their parents.
*/
-
void sysdev_shutdown(void)
{
struct sysdev_class * cls;
* This is only called by the device PM core, so we let them handle
* all synchronization.
*/
-
int sysdev_suspend(pm_message_t state)
{
struct sysdev_class * cls;
}
return ret;
}
-
+EXPORT_SYMBOL_GPL(sysdev_suspend);
/**
* sysdev_resume - Bring system devices back to life.
*
* Note: Interrupts are disabled when called.
*/
-
int sysdev_resume(void)
{
struct sysdev_class * cls;
}
return 0;
}
-
+EXPORT_SYMBOL_GPL(sysdev_resume);
int __init system_bus_init(void)
{
timeout = jiffies + 2*HZ+HZ/2;
while (time_before(jiffies, timeout))
- if (!(mfp.par_dt_reg & 0x20))
+ if (!(st_mfp.par_dt_reg & 0x20))
break;
status = FDC_READ( FDCREG_STATUS );
/* dummy seek command to make WP bit accessible */
FDC_WRITE( FDCREG_DATA, 0 );
FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
- while( mfp.par_dt_reg & 0x20 )
+ while( st_mfp.par_dt_reg & 0x20 )
;
status = FDC_READ( FDCREG_STATUS );
}
schedule_timeout_uninterruptible(30*HZ);
/* Now try to get the controller to respond to a no-op */
- for (i=0; i<12; i++) {
+ for (i=0; i<30; i++) {
if (cciss_noop(pdev) == 0)
break;
- else
- printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : ""));
+
+ schedule_timeout_uninterruptible(HZ);
+ }
+ if (i == 30) {
+ printk(KERN_ERR "cciss: controller seems dead\n");
+ return -EBUSY;
}
}
#include <linux/hdreg.h>
#include <linux/cdrom.h>
#include <linux/module.h>
+#include <linux/scatterlist.h>
#include <xen/xenbus.h>
#include <xen/grant_table.h>
enum blkif_state connected;
int ring_ref;
struct blkif_front_ring ring;
+ struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
unsigned int evtchn, irq;
struct request_queue *rq;
struct work_struct work;
struct blkfront_info *info = req->rq_disk->private_data;
unsigned long buffer_mfn;
struct blkif_request *ring_req;
- struct req_iterator iter;
- struct bio_vec *bvec;
unsigned long id;
unsigned int fsect, lsect;
- int ref;
+ int i, ref;
grant_ref_t gref_head;
+ struct scatterlist *sg;
if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
return 1;
if (blk_barrier_rq(req))
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
- ring_req->nr_segments = 0;
- rq_for_each_segment(bvec, req, iter) {
- BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
- buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
- fsect = bvec->bv_offset >> 9;
- lsect = fsect + (bvec->bv_len >> 9) - 1;
+ ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+ BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+ for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+ buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+ fsect = sg->offset >> 9;
+ lsect = fsect + (sg->length >> 9) - 1;
/* install a grant reference. */
ref = gnttab_claim_grant_reference(&gref_head);
BUG_ON(ref == -ENOSPC);
buffer_mfn,
rq_data_dir(req) );
- info->shadow[id].frame[ring_req->nr_segments] =
- mfn_to_pfn(buffer_mfn);
-
- ring_req->seg[ring_req->nr_segments] =
+ info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+ ring_req->seg[i] =
(struct blkif_request_segment) {
.gref = ref,
.first_sect = fsect,
.last_sect = lsect };
-
- ring_req->nr_segments++;
}
info->ring.req_prod_pvt++;
SHARED_RING_INIT(sring);
FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
+ sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
/* The SCC needs 3.5 PCLK cycles recovery time between to register
* accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 *
* 125 ns = 437.5 ns. This is too short for udelay().
- * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be
+ * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be
* quite right
*/
sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
break;
case SXIO_DO_RAMTEST:
- if (sx_initialized) /* Already initialized: better not ramtest the board. */
+ if (sx_initialized) { /* Already initialized: better not ramtest the board. */
rc = -EPERM;
break;
+ }
if (IS_SX_BOARD(board)) {
rc = do_memtest(board, 0, 0x7000);
if (!rc)
nbytes - i : SX_CHUNK_SIZE)) {
kfree(tmp);
rc = -EFAULT;
- break;
+ goto out;
}
memcpy_toio(board->base2 + offset + i, tmp,
(i + SX_CHUNK_SIZE > nbytes) ?
if (!ctx_pool) {
goto err;
}
- ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0);
+ ret = qmgr_request_queue(SEND_QID, NPE_QLEN_TOTAL, 0, 0,
+ "ixp_crypto:out", NULL);
if (ret)
goto err;
- ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0);
+ ret = qmgr_request_queue(RECV_QID, NPE_QLEN, 0, 0,
+ "ixp_crypto:in", NULL);
if (ret) {
qmgr_release_queue(SEND_QID);
goto err;
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes");
+MODULE_ALIAS("aes-all");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("sha1");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS("sha1-all");
+MODULE_ALIAS("sha256-all");
MODULE_ALIAS("sha1-padlock");
MODULE_ALIAS("sha256-padlock");
static struct platform_driver iop_adma_driver = {
.probe = iop_adma_probe,
- .remove = iop_adma_remove,
+ .remove = __devexit_p(iop_adma_remove),
.driver = {
.owner = THIS_MODULE,
.name = "iop-adma",
static struct platform_driver mv_xor_driver = {
.probe = mv_xor_probe,
- .remove = mv_xor_remove,
+ .remove = __devexit_p(mv_xor_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV_XOR_NAME,
dev->sigdata.lock = NULL;
master->lock.hw_lock = NULL; /* SHM removed */
master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
+ wake_up_interruptible_all(&master->lock.lock_queue);
}
break;
case _DRM_AGP:
* RETURNS:
* Zero on success, errno on failure.
*/
-void drm_fb_release(struct file *filp)
+void drm_fb_release(struct drm_file *priv)
{
- struct drm_file *priv = filp->private_data;
struct drm_device *dev = priv->minor->dev;
struct drm_framebuffer *fb, *tfb;
kfree(modes);
kfree(enabled);
}
+
+/**
+ * drm_encoder_crtc_ok - can a given crtc drive a given encoder?
+ * @encoder: encoder to test
+ * @crtc: crtc to test
+ *
+ * Return false if @encoder can't be driven by @crtc, true otherwise.
+ */
+static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
+ struct drm_crtc *crtc)
+{
+ struct drm_device *dev;
+ struct drm_crtc *tmp;
+ int crtc_mask = 1;
+
+ WARN(!crtc, "checking null crtc?");
+
+ dev = crtc->dev;
+
+ list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) {
+ if (tmp == crtc)
+ break;
+ crtc_mask <<= 1;
+ }
+
+ if (encoder->possible_crtcs & crtc_mask)
+ return true;
+ return false;
+}
+
+/*
+ * Check the CRTC we're going to map each output to vs. its current
+ * CRTC. If they don't match, we have to disable the output and the CRTC
+ * since the driver will have to re-route things.
+ */
+static void
+drm_crtc_prepare_encoders(struct drm_device *dev)
+{
+ struct drm_encoder_helper_funcs *encoder_funcs;
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ encoder_funcs = encoder->helper_private;
+ /* Disable unused encoders */
+ if (encoder->crtc == NULL)
+ (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+ /* Disable encoders whose CRTC is about to change */
+ if (encoder_funcs->get_crtc &&
+ encoder->crtc != (*encoder_funcs->get_crtc)(encoder))
+ (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
+ }
+}
+
/**
* drm_crtc_set_mode - set a mode
* @crtc: CRTC to program
if (drm_mode_equal(&saved_mode, &crtc->mode)) {
if (saved_x != crtc->x || saved_y != crtc->y ||
depth_changed || bpp_changed) {
- crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
+ ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
+ old_fb);
goto done;
}
}
encoder_funcs->prepare(encoder);
}
+ drm_crtc_prepare_encoders(dev);
+
crtc_funcs->prepare(crtc);
/* Set up the DPLL and any encoders state that needs to adjust or depend
* on the DPLL.
*/
- crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+ ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
+ if (!ret)
+ goto done;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
struct drm_device *dev;
struct drm_crtc **save_crtcs, *new_crtc;
struct drm_encoder **save_encoders, *new_encoder;
- struct drm_framebuffer *old_fb;
+ struct drm_framebuffer *old_fb = NULL;
bool save_enabled;
bool mode_changed = false;
bool fb_changed = false;
* and then just flip_or_move it */
if (set->crtc->fb != set->fb) {
/* If we have no fb then treat it as a full mode set */
- if (set->crtc->fb == NULL)
+ if (set->crtc->fb == NULL) {
+ DRM_DEBUG("crtc has no fb, full mode set\n");
mode_changed = true;
- else if ((set->fb->bits_per_pixel !=
+ } else if ((set->fb->bits_per_pixel !=
set->crtc->fb->bits_per_pixel) ||
set->fb->depth != set->crtc->fb->depth)
fb_changed = true;
fb_changed = true;
if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
- DRM_DEBUG("modes are different\n");
+ DRM_DEBUG("modes are different, full mode set\n");
drm_mode_debug_printmodeline(&set->crtc->mode);
drm_mode_debug_printmodeline(set->mode);
mode_changed = true;
}
if (new_encoder != connector->encoder) {
+ DRM_DEBUG("encoder changed, full mode switch\n");
mode_changed = true;
connector->encoder = new_encoder;
}
if (set->connectors[ro] == connector)
new_crtc = set->crtc;
}
+
+ /* Make sure the new CRTC will work with the encoder */
+ if (new_crtc &&
+ !drm_encoder_crtc_ok(connector->encoder, new_crtc)) {
+ ret = -EINVAL;
+ goto fail_set_mode;
+ }
if (new_crtc != connector->encoder->crtc) {
+ DRM_DEBUG("crtc changed, full mode switch\n");
mode_changed = true;
connector->encoder->crtc = new_crtc;
}
+ DRM_DEBUG("setting connector %d crtc to %p\n",
+ connector->base.id, new_crtc);
}
/* mode_set_base is not a required function */
if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
set->x, set->y,
old_fb)) {
+ DRM_ERROR("failed to set mode on crtc %p\n",
+ set->crtc);
ret = -EINVAL;
goto fail_set_mode;
}
old_fb = set->crtc->fb;
if (set->crtc->fb != set->fb)
set->crtc->fb = set->fb;
- crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb);
+ ret = crtc_funcs->mode_set_base(set->crtc,
+ set->x, set->y, old_fb);
+ if (ret != 0)
+ goto fail_set_mode;
}
kfree(save_encoders);
fail_set_mode:
set->crtc->enabled = save_enabled;
+ set->crtc->fb = old_fb;
count = 0;
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if (!connector->encoder)
+ continue;
+
connector->encoder->crtc = save_crtcs[count++];
+ }
fail_no_encoder:
kfree(save_crtcs);
count = 0;
DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
goto bad;
}
- if (edid->revision <= 0 || edid->revision > 3) {
+ if (edid->revision > 3) {
DRM_ERROR("EDID has minor version %d, which is not between 0-3\n", edid->revision);
goto bad;
}
mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
- mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 8) |
+ mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
pt->vsync_offset_lo);
mode->vsync_end = mode->vsync_start +
- ((pt->vsync_pulse_width_hi << 8) |
+ ((pt->vsync_pulse_width_hi << 4) |
pt->vsync_pulse_width_lo);
mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
if (dev->driver->driver_features & DRIVER_GEM)
drm_gem_release(dev, file_priv);
+ if (dev->driver->driver_features & DRIVER_MODESET)
+ drm_fb_release(file_priv);
+
mutex_lock(&dev->ctxlist_mutex);
if (!list_empty(&dev->ctxlist)) {
struct drm_ctx_list *pos, *n;
mutex_lock(&dev->struct_mutex);
if (file_priv->is_master) {
+ struct drm_master *master = file_priv->master;
struct drm_file *temp;
list_for_each_entry(temp, &dev->filelist, lhead) {
if ((temp->master == file_priv->master) &&
temp->authenticated = 0;
}
+ /**
+ * Since the master is disappearing, so is the
+ * possibility to lock.
+ */
+
+ if (master->lock.hw_lock) {
+ if (dev->sigdata.lock == master->lock.hw_lock)
+ dev->sigdata.lock = NULL;
+ master->lock.hw_lock = NULL;
+ master->lock.file_priv = NULL;
+ wake_up_interruptible_all(&master->lock.lock_queue);
+ }
+
if (file_priv->minor->master == file_priv->master) {
/* drop the reference held my the minor */
drm_master_put(&file_priv->minor->master);
if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START,
DRM_FILE_PAGE_OFFSET_SIZE)) {
- drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
drm_ht_remove(&mm->offset_hash);
+ drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM);
return -ENOMEM;
}
return -EBADF;
again:
- if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0)
- return -ENOMEM;
+ if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) {
+ ret = -ENOMEM;
+ goto err;
+ }
spin_lock(&dev->object_name_lock);
- if (obj->name) {
- args->name = obj->name;
+ if (!obj->name) {
+ ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
+ &obj->name);
+ args->name = (uint64_t) obj->name;
spin_unlock(&dev->object_name_lock);
- return 0;
- }
- ret = idr_get_new_above(&dev->object_name_idr, obj, 1,
- &obj->name);
- spin_unlock(&dev->object_name_lock);
- if (ret == -EAGAIN)
- goto again;
- if (ret != 0) {
- mutex_lock(&dev->struct_mutex);
- drm_gem_object_unreference(obj);
- mutex_unlock(&dev->struct_mutex);
- return ret;
- }
+ if (ret == -EAGAIN)
+ goto again;
- /*
- * Leave the reference from the lookup around as the
- * name table now holds one
- */
- args->name = (uint64_t) obj->name;
+ if (ret != 0)
+ goto err;
- return 0;
+ /* Allocate a reference for the name table. */
+ drm_gem_object_reference(obj);
+ } else {
+ args->name = (uint64_t) obj->name;
+ spin_unlock(&dev->object_name_lock);
+ ret = 0;
+ }
+
+err:
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
}
/**
spin_lock(&dev->object_name_lock);
if (obj->name) {
idr_remove(&dev->object_name_idr, obj->name);
+ obj->name = 0;
spin_unlock(&dev->object_name_lock);
/*
* The object name held a reference to this object, drop
}
EXPORT_SYMBOL(drm_gem_object_handle_free);
+void drm_gem_vm_open(struct vm_area_struct *vma)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+
+ drm_gem_object_reference(obj);
+}
+EXPORT_SYMBOL(drm_gem_vm_open);
+
+void drm_gem_vm_close(struct vm_area_struct *vma)
+{
+ struct drm_gem_object *obj = vma->vm_private_data;
+ struct drm_device *dev = obj->dev;
+
+ mutex_lock(&dev->struct_mutex);
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+}
+EXPORT_SYMBOL(drm_gem_vm_close);
+
+
/**
* drm_gem_mmap - memory map routine for GEM objects
* @filp: DRM file pointer
#endif
vma->vm_page_prot = __pgprot(prot);
+ /* Take a ref for this mapping of the object, so that the fault
+ * handler can dereference the mmap offset's pointer to the object.
+ * This reference is cleaned up by the corresponding vm_close
+ * (which should happen whether the vma was created by this call, or
+ * by a vm_open due to mremap or partial unmap or whatever).
+ */
+ drm_gem_object_reference(obj);
+
vma->vm_file = filp; /* Needed for drm_vm_open() */
drm_vm_open_locked(vma);
*/
void drm_vblank_put(struct drm_device *dev, int crtc)
{
+ BUG_ON (atomic_read (&dev->vblank_refcount[crtc]) == 0);
+
/* Last user schedules interrupt disable */
if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
* so that interrupts remain enabled in the interim.
*/
if (!dev->vblank_inmodeset[crtc]) {
- dev->vblank_inmodeset[crtc] = 1;
- drm_vblank_get(dev, crtc);
+ dev->vblank_inmodeset[crtc] = 0x1;
+ if (drm_vblank_get(dev, crtc) == 0)
+ dev->vblank_inmodeset[crtc] |= 0x2;
}
}
EXPORT_SYMBOL(drm_vblank_pre_modeset);
if (dev->vblank_inmodeset[crtc]) {
spin_lock_irqsave(&dev->vbl_lock, irqflags);
dev->vblank_disable_allowed = 1;
- dev->vblank_inmodeset[crtc] = 0;
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- drm_vblank_put(dev, crtc);
+
+ if (dev->vblank_inmodeset[crtc] & 0x2)
+ drm_vblank_put(dev, crtc);
+
+ dev->vblank_inmodeset[crtc] = 0;
}
}
EXPORT_SYMBOL(drm_vblank_post_modeset);
__set_current_state(TASK_INTERRUPTIBLE);
if (!master->lock.hw_lock) {
/* Device has been unregistered */
+ send_sig(SIGTERM, current, 0);
ret = -EINTR;
break;
}
/* Contention */
schedule();
if (signal_pending(current)) {
- ret = -ERESTARTSYS;
+ ret = -EINTR;
break;
}
}
drm_ht_remove(&master->magiclist);
- if (master->lock.hw_lock) {
- if (dev->sigdata.lock == master->lock.hw_lock)
- dev->sigdata.lock = NULL;
- master->lock.hw_lock = NULL;
- master->lock.file_priv = NULL;
- wake_up_interruptible(&master->lock.lock_queue);
- }
-
drm_free(master, sizeof(*master), DRM_MEM_DRIVER);
}
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
- mutex_lock(&dev->struct_mutex);
+ mutex_unlock(&dev->struct_mutex);
}
return 0;
dev_priv->ring.map.flags = 0;
dev_priv->ring.map.mtrr = 0;
- drm_core_ioremap(&dev_priv->ring.map, dev);
+ drm_core_ioremap_wc(&dev_priv->ring.map, dev);
if (dev_priv->ring.map.handle == NULL) {
i915_dma_cleanup(dev);
dev_priv->hws_map.flags = 0;
dev_priv->hws_map.mtrr = 0;
- drm_core_ioremap(&dev_priv->hws_map, dev);
+ drm_core_ioremap_wc(&dev_priv->hws_map, dev);
if (dev_priv->hws_map.handle == NULL) {
i915_dma_cleanup(dev);
dev_priv->status_gfx_addr = 0;
dev_priv->mm.gtt_mapping =
io_mapping_create_wc(dev->agp->base,
dev->agp->agp_info.aper_size * 1024*1024);
+ if (dev_priv->mm.gtt_mapping == NULL) {
+ ret = -EIO;
+ goto out_rmmap;
+ }
+
/* Set up a WC MTRR for non-PAT systems. This is more common than
* one would think, because the kernel disables PAT on first
* generation Core chips because WC PAT gets overridden by a UC
if (!I915_NEED_GFX_HWS(dev)) {
ret = i915_init_phys_hws(dev);
if (ret != 0)
- goto out_rmmap;
+ goto out_iomapfree;
}
/* On the 945G/GM, the chipset reports the MSI capability on the
return 0;
+out_iomapfree:
+ io_mapping_free(dev_priv->mm.gtt_mapping);
out_rmmap:
iounmap(dev_priv->regs);
free_priv:
*
*/
+#include <linux/device.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
i915_save_state(dev);
+ /* If KMS is active, we do the leavevt stuff here */
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ if (i915_gem_idle(dev))
+ dev_err(&dev->pdev->dev,
+ "GEM idle failed, resume may fail\n");
+ drm_irq_uninstall(dev);
+ }
+
intel_opregion_free(dev);
if (state.event == PM_EVENT_SUSPEND) {
static int i915_resume(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int ret = 0;
+
pci_set_power_state(dev->pdev, PCI_D0);
pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
intel_opregion_init(dev);
- return 0;
+ /* KMS EnterVT equivalent */
+ if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ mutex_lock(&dev->struct_mutex);
+ dev_priv->mm.suspended = 0;
+
+ ret = i915_gem_init_ringbuffer(dev);
+ if (ret != 0)
+ ret = -1;
+ mutex_unlock(&dev->struct_mutex);
+
+ drm_irq_install(dev);
+ }
+
+ return ret;
}
static struct vm_operations_struct i915_gem_vm_ops = {
.fault = i915_gem_fault,
+ .open = drm_gem_vm_open,
+ .close = drm_gem_vm_close,
};
static struct drm_driver driver = {
unsigned int lvds_dither:1;
unsigned int lvds_vbt:1;
unsigned int int_crt_support:1;
+ unsigned int lvds_use_ssc:1;
+ int lvds_ssc_freq;
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end);
+int i915_gem_idle(struct drm_device *dev);
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
int write);
#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
-static void
-i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain);
static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
case -EAGAIN:
return VM_FAULT_OOM;
case -EFAULT:
- case -EBUSY:
- DRM_ERROR("can't insert pfn?? fault or busy...\n");
return VM_FAULT_SIGBUS;
default:
return VM_FAULT_NOPAGE;
return ret;
}
+static void
+i915_gem_free_mmap_offset(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_gem_mm *mm = dev->mm_private;
+ struct drm_map_list *list;
+
+ list = &obj->map_list;
+ drm_ht_remove_item(&mm->offset_hash, &list->hash);
+
+ if (list->file_offset_node) {
+ drm_mm_put_block(list->file_offset_node);
+ list->file_offset_node = NULL;
+ }
+
+ if (list->map) {
+ drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER);
+ list->map = NULL;
+ }
+
+ obj_priv->mmap_offset = 0;
+}
+
/**
* i915_gem_get_gtt_alignment - return required GTT alignment for an object
* @obj: object to check
if (!obj_priv->mmap_offset) {
ret = i915_gem_create_mmap_offset(obj);
- if (ret)
+ if (ret) {
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return ret;
+ }
}
args->offset = obj_priv->mmap_offset;
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t seqno;
+ if (!dev_priv->hw_status_page)
+ return;
+
seqno = i915_get_gem_seqno(dev);
while (!list_empty(&dev_priv->mm.request_list)) {
* drm_agp_chipset_flush
*/
static void
-i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain)
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
- BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
- BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
+ BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU);
+ BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU);
#if WATCH_BUF
DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
__func__, obj,
- obj->read_domains, read_domains,
- obj->write_domain, write_domain);
+ obj->read_domains, obj->pending_read_domains,
+ obj->write_domain, obj->pending_write_domain);
#endif
/*
* If the object isn't moving to a new write domain,
* let the object stay in multiple read domains
*/
- if (write_domain == 0)
- read_domains |= obj->read_domains;
+ if (obj->pending_write_domain == 0)
+ obj->pending_read_domains |= obj->read_domains;
else
obj_priv->dirty = 1;
* any read domains which differ from the old
* write domain
*/
- if (obj->write_domain && obj->write_domain != read_domains) {
+ if (obj->write_domain &&
+ obj->write_domain != obj->pending_read_domains) {
flush_domains |= obj->write_domain;
- invalidate_domains |= read_domains & ~obj->write_domain;
+ invalidate_domains |=
+ obj->pending_read_domains & ~obj->write_domain;
}
/*
* Invalidate any read caches which may have
* stale data. That is, any new read domains.
*/
- invalidate_domains |= read_domains & ~obj->read_domains;
+ invalidate_domains |= obj->pending_read_domains & ~obj->read_domains;
if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) {
#if WATCH_BUF
DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
i915_gem_clflush_object(obj);
}
- if ((write_domain | flush_domains) != 0)
- obj->write_domain = write_domain;
- obj->read_domains = read_domains;
+ /* The actual obj->write_domain will be updated with
+ * pending_write_domain after we emit the accumulated flush for all
+ * of our domain changes in execbuffers (which clears objects'
+ * write_domains). So if we have a current write domain that we
+ * aren't changing, set pending_write_domain to that.
+ */
+ if (flush_domains == 0 && obj->pending_write_domain == 0)
+ obj->pending_write_domain = obj->write_domain;
+ obj->read_domains = obj->pending_read_domains;
dev->invalidate_domains |= invalidate_domains;
dev->flush_domains |= flush_domains;
(int) reloc.offset,
reloc.read_domains,
reloc.write_domain);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
return -EINVAL;
}
if (dev_priv->mm.wedged) {
DRM_ERROR("Execbuf while wedged\n");
mutex_unlock(&dev->struct_mutex);
- return -EIO;
+ ret = -EIO;
+ goto pre_mutex_err;
}
if (dev_priv->mm.suspended) {
DRM_ERROR("Execbuf while VT-switched.\n");
mutex_unlock(&dev->struct_mutex);
- return -EBUSY;
+ ret = -EBUSY;
+ goto pre_mutex_err;
}
/* Look up object handles */
struct drm_gem_object *obj = object_list[i];
/* Compute new gpu domains and update invalidate/flush */
- i915_gem_object_set_to_gpu_domain(obj,
- obj->pending_read_domains,
- obj->pending_write_domain);
+ i915_gem_object_set_to_gpu_domain(obj);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
(void)i915_add_request(dev, dev->flush_domains);
}
+ for (i = 0; i < args->buffer_count; i++) {
+ struct drm_gem_object *obj = object_list[i];
+
+ obj->write_domain = obj->pending_write_domain;
+ }
+
i915_verify_inactive(dev, __FILE__, __LINE__);
#if WATCH_COHERENCY
i915_verify_inactive(dev, __FILE__, __LINE__);
- /* Copy the new buffer offsets back to the user's exec list. */
- ret = copy_to_user((struct drm_i915_relocation_entry __user *)
- (uintptr_t) args->buffers_ptr,
- exec_list,
- sizeof(*exec_list) * args->buffer_count);
- if (ret)
- DRM_ERROR("failed to copy %d exec entries "
- "back to user (%d)\n",
- args->buffer_count, ret);
err:
for (i = 0; i < pinned; i++)
i915_gem_object_unpin(object_list[i]);
mutex_unlock(&dev->struct_mutex);
+ if (!ret) {
+ /* Copy the new buffer offsets back to the user's exec list. */
+ ret = copy_to_user((struct drm_i915_relocation_entry __user *)
+ (uintptr_t) args->buffers_ptr,
+ exec_list,
+ sizeof(*exec_list) * args->buffer_count);
+ if (ret)
+ DRM_ERROR("failed to copy %d exec entries "
+ "back to user (%d)\n",
+ args->buffer_count, ret);
+ }
+
pre_mutex_err:
drm_free(object_list, sizeof(*object_list) * args->buffer_count,
DRM_MEM_DRIVER);
if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
+ drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
return -EBADF;
}
+ /* Update the active list for the hardware's current position.
+ * Otherwise this only updates on a delayed timer or when irqs are
+ * actually unmasked, and our working set ends up being larger than
+ * required.
+ */
+ i915_gem_retire_requests(dev);
+
obj_priv = obj->driver_private;
/* Don't count being on the flushing list against the object being
* done. Otherwise, a buffer left on the flushing list but not getting
void i915_gem_free_object(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_gem_mm *mm = dev->mm_private;
- struct drm_map_list *list;
- struct drm_map *map;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
while (obj_priv->pin_count > 0)
i915_gem_object_unbind(obj);
- list = &obj->map_list;
- drm_ht_remove_item(&mm->offset_hash, &list->hash);
-
- if (list->file_offset_node) {
- drm_mm_put_block(list->file_offset_node);
- list->file_offset_node = NULL;
- }
-
- map = list->map;
- if (map) {
- drm_free(map, sizeof(*map), DRM_MEM_DRIVER);
- list->map = NULL;
- }
+ i915_gem_free_mmap_offset(obj);
drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
return 0;
}
-static int
+int
i915_gem_idle(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
if (dev_priv->hw_status_page == NULL) {
DRM_ERROR("Failed to map status page.\n");
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+ i915_gem_object_unpin(obj);
drm_gem_object_unreference(obj);
return -EINVAL;
}
return 0;
}
+static void
+i915_gem_cleanup_hws(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ if (dev_priv->hws_obj == NULL)
+ return;
+
+ obj = dev_priv->hws_obj;
+ obj_priv = obj->driver_private;
+
+ kunmap(obj_priv->page_list[0]);
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ dev_priv->hws_obj = NULL;
+
+ memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
+ dev_priv->hw_status_page = NULL;
+
+ /* Write high address into HWS_PGA when disabling. */
+ I915_WRITE(HWS_PGA, 0x1ffff000);
+}
+
int
i915_gem_init_ringbuffer(struct drm_device *dev)
{
obj = drm_gem_object_alloc(dev, 128 * 1024);
if (obj == NULL) {
DRM_ERROR("Failed to allocate ringbuffer\n");
+ i915_gem_cleanup_hws(dev);
return -ENOMEM;
}
obj_priv = obj->driver_private;
ret = i915_gem_object_pin(obj, 4096);
if (ret != 0) {
drm_gem_object_unreference(obj);
+ i915_gem_cleanup_hws(dev);
return ret;
}
if (ring->map.handle == NULL) {
DRM_ERROR("Failed to map ringbuffer.\n");
memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
+ i915_gem_object_unpin(obj);
drm_gem_object_unreference(obj);
+ i915_gem_cleanup_hws(dev);
return -EINVAL;
}
ring->ring_obj = obj;
dev_priv->ring.ring_obj = NULL;
memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
- if (dev_priv->hws_obj != NULL) {
- struct drm_gem_object *obj = dev_priv->hws_obj;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
-
- kunmap(obj_priv->page_list[0]);
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- dev_priv->hws_obj = NULL;
- memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- dev_priv->hw_status_page = NULL;
-
- /* Write high address into HWS_PGA when disabling. */
- I915_WRITE(HWS_PGA, 0x1ffff000);
- }
+ i915_gem_cleanup_hws(dev);
}
int
user_data = (char __user *) (uintptr_t) args->data_ptr;
obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
- DRM_ERROR("obj_addr %p, %lld\n", obj_addr, args->size);
+ DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size);
ret = copy_from_user(obj_addr, user_data, args->size);
if (ret)
return -EFAULT;
}
obj_priv->stride = args->stride;
- mutex_unlock(&dev->struct_mutex);
-
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
DRM_ERROR("unknown tiling mode\n");
}
- mutex_unlock(&dev->struct_mutex);
-
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return 0;
}
drm_i915_irq_emit_t *emit = data;
int result;
- RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
-
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
+
+ RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
+
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
panel_fixed_mode->clock = dvo_timing->clock * 10;
panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+ /* Some VBTs have bogus h/vtotal values */
+ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+ panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+ if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+ panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
drm_mode_set_name(panel_fixed_mode);
dev_priv->vbt_mode = panel_fixed_mode;
if (general) {
dev_priv->int_tv_support = general->int_tv_support;
dev_priv->int_crt_support = general->int_crt_support;
+ dev_priv->lvds_use_ssc = general->enable_ssc;
+
+ if (dev_priv->lvds_use_ssc) {
+ if (IS_I855(dev_priv->dev))
+ dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48;
+ else
+ dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96;
+ }
}
}
#define I9XX_DOT_MAX 400000
#define I9XX_VCO_MIN 1400000
#define I9XX_VCO_MAX 2800000
-#define I9XX_N_MIN 3
-#define I9XX_N_MAX 8
+#define I9XX_N_MIN 1
+#define I9XX_N_MAX 6
#define I9XX_M_MIN 70
#define I9XX_M_MAX 120
#define I9XX_M1_MIN 10
-#define I9XX_M1_MAX 20
+#define I9XX_M1_MAX 22
#define I9XX_M2_MIN 5
#define I9XX_M2_MAX 9
#define I9XX_P_SDVO_DAC_MIN 5
return limit;
}
-/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
-
-static void i8xx_clock(int refclk, intel_clock_t *clock)
+static void intel_clock(int refclk, intel_clock_t *clock)
{
clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
clock->p = clock->p1 * clock->p2;
clock->dot = clock->vco / clock->p;
}
-/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
-
-static void i9xx_clock(int refclk, intel_clock_t *clock)
-{
- clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
- clock->p = clock->p1 * clock->p2;
- clock->vco = refclk * clock->m / (clock->n + 2);
- clock->dot = clock->vco / clock->p;
-}
-
-static void intel_clock(struct drm_device *dev, int refclk,
- intel_clock_t *clock)
-{
- if (IS_I9XX(dev))
- i9xx_clock (refclk, clock);
- else
- i8xx_clock (refclk, clock);
-}
-
/**
* Returns whether any output on the specified pipe is of the specified type
*/
return false;
}
-#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; }
+#define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
/**
* Returns whether the given set of divisors are valid for a given refclk with
* the given connectors.
clock.p1 <= limit->p1.max; clock.p1++) {
int this_err;
- intel_clock(dev, refclk, &clock);
+ intel_clock(refclk, &clock);
if (!intel_PLL_is_valid(crtc, &clock))
continue;
udelay(20000);
}
-static void
+static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
+ int ret;
/* no fb bound */
if (!crtc->fb) {
DRM_DEBUG("No FB bound\n");
- return;
+ return 0;
+ }
+
+ switch (pipe) {
+ case 0:
+ case 1:
+ break;
+ default:
+ DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ return -EINVAL;
}
intel_fb = to_intel_framebuffer(crtc->fb);
alignment = 64 * 1024;
break;
case I915_TILING_X:
- if (IS_I9XX(dev))
- alignment = 1024 * 1024;
- else
- alignment = 512 * 1024;
+ /* pin() will align the object as required by fence */
+ alignment = 0;
break;
case I915_TILING_Y:
/* FIXME: Is this true? */
DRM_ERROR("Y tiled not allowed for scan out buffers\n");
- return;
+ return -EINVAL;
default:
BUG();
}
- if (i915_gem_object_pin(intel_fb->obj, alignment))
- return;
-
- i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
-
- Start = obj_priv->gtt_offset;
- Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(intel_fb->obj, alignment);
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
- I915_WRITE(dspstride, crtc->fb->pitch);
+ ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+ if (ret != 0) {
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
dspcntr = I915_READ(dspcntr_reg);
/* Mask out pixel format bits in case we change it */
break;
default:
DRM_ERROR("Unknown color depth\n");
- return;
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
}
I915_WRITE(dspcntr_reg, dspcntr);
+ Start = obj_priv->gtt_offset;
+ Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspbase, Offset);
I915_READ(dspbase);
intel_fb = to_intel_framebuffer(old_fb);
i915_gem_object_unpin(intel_fb->obj);
}
+ mutex_unlock(&dev->struct_mutex);
if (!dev->primary->master)
- return;
+ return 0;
master_priv = dev->primary->master->driver_priv;
if (!master_priv->sarea_priv)
- return;
+ return 0;
- switch (pipe) {
- case 0:
- master_priv->sarea_priv->pipeA_x = x;
- master_priv->sarea_priv->pipeA_y = y;
- break;
- case 1:
+ if (pipe) {
master_priv->sarea_priv->pipeB_x = x;
master_priv->sarea_priv->pipeB_y = y;
- break;
- default:
- DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
- break;
+ } else {
+ master_priv->sarea_priv->pipeA_x = x;
+ master_priv->sarea_priv->pipeA_y = y;
}
+
+ return 0;
}
return 1;
}
-static void intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk;
+ int refclk, num_outputs = 0;
intel_clock_t clock;
u32 dpll = 0, fp = 0, dspcntr, pipeconf;
bool ok, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
+ int ret;
drm_vblank_pre_modeset(dev, pipe);
is_crt = true;
break;
}
+
+ num_outputs++;
}
- if (IS_I9XX(dev)) {
+ if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
+ refclk = dev_priv->lvds_ssc_freq * 1000;
+ DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000);
+ } else if (IS_I9XX(dev)) {
refclk = 96000;
} else {
refclk = 48000;
ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
- return;
+ return -EINVAL;
}
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
}
}
- if (is_tv) {
+ if (is_sdvo && is_tv)
+ dpll |= PLL_REF_INPUT_TVCLKINBC;
+ else if (is_tv)
/* XXX: just matching BIOS for now */
-/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
+ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
- }
+ else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
+ dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
I915_WRITE(dspcntr_reg, dspcntr);
/* Flush the plane changes */
- intel_pipe_set_base(crtc, x, y, old_fb);
+ ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ if (ret != 0)
+ return ret;
drm_vblank_post_modeset(dev, pipe);
+
+ return 0;
}
/** Loads the palette/gamma unit for the CRTC with the prepared values */
temp = CURSOR_MODE_DISABLE;
addr = 0;
bo = NULL;
+ mutex_lock(&dev->struct_mutex);
goto finish;
}
}
/* we only need to pin inside GTT if cursor is non-phy */
+ mutex_lock(&dev->struct_mutex);
if (!dev_priv->cursor_needs_physical) {
ret = i915_gem_object_pin(bo, PAGE_SIZE);
if (ret) {
DRM_ERROR("failed to pin cursor bo\n");
- goto fail;
+ goto fail_locked;
}
addr = obj_priv->gtt_offset;
} else {
ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1);
if (ret) {
DRM_ERROR("failed to attach phys object\n");
- goto fail;
+ goto fail_locked;
}
addr = obj_priv->phys_obj->handle->busaddr;
}
i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
} else
i915_gem_object_unpin(intel_crtc->cursor_bo);
- mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(intel_crtc->cursor_bo);
- mutex_unlock(&dev->struct_mutex);
}
+ mutex_unlock(&dev->struct_mutex);
intel_crtc->cursor_addr = addr;
intel_crtc->cursor_bo = bo;
return 0;
fail:
mutex_lock(&dev->struct_mutex);
+fail_locked:
drm_gem_object_unreference(bo);
mutex_unlock(&dev->struct_mutex);
return ret;
}
/* XXX: Handle the 100Mhz refclk */
- i9xx_clock(96000, &clock);
+ intel_clock(96000, &clock);
} else {
bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
if ((dpll & PLL_REF_INPUT_MASK) ==
PLLB_REF_INPUT_SPREADSPECTRUMIN) {
/* XXX: might not be 66MHz */
- i8xx_clock(66000, &clock);
+ intel_clock(66000, &clock);
} else
- i8xx_clock(48000, &clock);
+ intel_clock(48000, &clock);
} else {
if (dpll & PLL_P1_DIVIDE_BY_TWO)
clock.p1 = 2;
else
clock.p2 = 2;
- i8xx_clock(48000, &clock);
+ intel_clock(48000, &clock);
}
}
ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
if (ret) {
+ mutex_lock(&dev->struct_mutex);
drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
return NULL;
}
ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
if (ret) {
DRM_ERROR("failed to allocate fb.\n");
- goto out_unref;
+ goto out_unpin;
}
list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
info = framebuffer_alloc(sizeof(struct intelfb_par), device);
if (!info) {
ret = -ENOMEM;
- goto out_unref;
+ goto out_unpin;
}
par = info->par;
size);
if (!info->screen_base) {
ret = -ENOSPC;
- goto out_unref;
+ goto out_unpin;
}
info->screen_size = size;
mutex_unlock(&dev->struct_mutex);
return 0;
+out_unpin:
+ i915_gem_object_unpin(fbo);
out_unref:
drm_gem_object_unreference(fbo);
mutex_unlock(&dev->struct_mutex);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
DRM_MODE_TYPE_PREFERRED;
- drm_mode_probed_add(connector,
- dev_priv->panel_fixed_mode);
goto out;
}
}
#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
/** Mapping of command numbers to names, for debug output */
-const static struct _sdvo_cmd_name {
+static const struct _sdvo_cmd_name {
u8 cmd;
char *name;
} sdvo_cmd_names[] = {
* These values account for -1s required.
*/
-const static struct tv_mode tv_modes[] = {
+static const struct tv_mode tv_modes[] = {
{
.name = "NTSC-M",
.clock = 107520,
}
static void radeon_cp_init_ring_buffer(struct drm_device * dev,
- drm_radeon_private_t * dev_priv)
+ drm_radeon_private_t *dev_priv,
+ struct drm_file *file_priv)
{
+ struct drm_radeon_master_private *master_priv;
u32 ring_start, cur_read_ptr;
u32 tmp;
dev_priv->scratch[2] = 0;
RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0);
+ /* reset sarea copies of these */
+ master_priv = file_priv->master->driver_priv;
+ if (master_priv->sarea_priv) {
+ master_priv->sarea_priv->last_frame = 0;
+ master_priv->sarea_priv->last_dispatch = 0;
+ master_priv->sarea_priv->last_clear = 0;
+ }
+
radeon_do_wait_for_idle(dev_priv);
/* Sync everything up */
}
radeon_cp_load_microcode(dev_priv);
- radeon_cp_init_ring_buffer(dev, dev_priv);
+ radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
dev_priv->last_buf = 0;
*
* Charl P. Botha <http://cpbotha.net>
*/
-static int radeon_do_resume_cp(struct drm_device * dev)
+static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
}
radeon_cp_load_microcode(dev_priv);
- radeon_cp_init_ring_buffer(dev, dev_priv);
+ radeon_cp_init_ring_buffer(dev, dev_priv, file_priv);
radeon_do_engine_reset(dev);
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
*/
int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
-
- return radeon_do_resume_cp(dev);
+ return radeon_do_resume_cp(dev, file_priv);
}
int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv)
.getsda = ioc_getsda,
.getscl = ioc_getscl,
.udelay = 80,
- .timeout = 100
+ .timeout = HZ,
};
static struct i2c_adapter ioc_ops = {
+ .nr = 0,
.algo_data = &ioc_data,
};
{
force_ones = FORCE_ONES | SCL | SDA;
- return i2c_bit_add_bus(&ioc_ops);
+ return i2c_bit_add_numbered_bus(&ioc_ops);
}
module_init(i2c_ioc_init);
{
int timeout = 500;
- while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF))
+ while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout)
udelay(1);
if (!timeout) {
{
int timeout = 500;
- while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF))
+ while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout)
udelay(1);
if (!timeout) {
drv_data->algo_data.getsda = ixp2000_bit_getsda;
drv_data->algo_data.getscl = ixp2000_bit_getscl;
drv_data->algo_data.udelay = 6;
- drv_data->algo_data.timeout = 100;
+ drv_data->algo_data.timeout = HZ;
strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
sizeof(drv_data->adapter.name));
return 0;
}
-static void __devexit
+static void
mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
{
if (drv_data->reg_base) {
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
- .remove = mv64xxx_i2c_remove,
+ .remove = __devexit_p(mv64xxx_i2c_remove),
.driver = {
.owner = THIS_MODULE,
.name = MV64XXX_I2C_CTLR_NAME,
i2c_pxa_start_message(i2c);
- while (timeout-- && i2c->msg_num > 0) {
+ while (i2c->msg_num > 0 && --timeout) {
i2c_pxa_handler(0, i2c);
udelay(10);
}
.getsda = scx200_i2c_getsda,
.getscl = scx200_i2c_getscl,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct i2c_adapter scx200_i2c_ops = {
case I2C_SMBUS_QUICK:
msg[0].len = 0;
/* Special case: The read/write field is used as data */
- msg[0].flags = flags | (read_write==I2C_SMBUS_READ)?I2C_M_RD:0;
+ msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+ I2C_M_RD : 0);
num = 1;
break;
case I2C_SMBUS_BYTE:
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/smp_lock.h>
+#include <linux/jiffies.h>
#include <asm/uaccess.h>
static struct i2c_driver i2cdev_driver;
client->adapter->retries = arg;
break;
case I2C_TIMEOUT:
- client->adapter->timeout = arg;
+ /* For historical reasons, user-space sets the timeout
+ * value in units of 10 ms.
+ */
+ client->adapter->timeout = msecs_to_jiffies(arg * 10);
break;
default:
/* NOTE: returning a fault code here could cause trouble
SMART parameters from disk drives.
To compile this driver as a module, choose M here: the
- module will be called ide.
+ module will be called ide-core.ko.
For further information, please read <file:Documentation/ide/ide.txt>.
* Check for broken FIFO support.
*/
if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
+ dev->device == PCI_DEVICE_ID_AMD_VIPER_7411)
t &= 0x0f;
else
t |= 0xf0;
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ int timing_shift = (drive->dn ^ 1) * 8;
u32 pio_timing_data;
u16 pio_mode_data;
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
+ int timing_shift = (drive->dn ^ 1) * 8;
u32 tmp32;
u16 tmp16;
u16 udma_ctl = 0;
static DEFINE_MUTEX(idecd_ref_mutex);
-static void ide_cd_release(struct kref *);
+static void ide_cd_release(struct device *);
static struct cdrom_info *ide_cd_get(struct gendisk *disk)
{
if (ide_device_get(cd->drive))
cd = NULL;
else
- kref_get(&cd->kref);
+ get_device(&cd->dev);
}
mutex_unlock(&idecd_ref_mutex);
ide_drive_t *drive = cd->drive;
mutex_lock(&idecd_ref_mutex);
- kref_put(&cd->kref, ide_cd_release);
+ put_device(&cd->dev);
ide_device_put(drive);
mutex_unlock(&idecd_ref_mutex);
}
bio_sectors = max(bio_sectors(failed_command->bio), 4U);
sector &= ~(bio_sectors - 1);
+ /*
+ * The SCSI specification allows for the value
+ * returned by READ CAPACITY to be up to 75 2K
+ * sectors past the last readable block.
+ * Therefore, if we hit a medium error within the
+ * last 75 2K sectors, we decrease the saved size
+ * value.
+ */
if (sector < get_capacity(info->disk) &&
drive->probed_capacity - sector < 4 * 75)
set_capacity(info->disk, sector);
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
ide_proc_unregister_driver(drive, info->driver);
-
+ device_del(&info->dev);
del_gendisk(info->disk);
- ide_cd_put(info);
+ mutex_lock(&idecd_ref_mutex);
+ put_device(&info->dev);
+ mutex_unlock(&idecd_ref_mutex);
}
-static void ide_cd_release(struct kref *kref)
+static void ide_cd_release(struct device *dev)
{
- struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
+ struct cdrom_info *info = to_ide_drv(dev, cdrom_info);
struct cdrom_device_info *devinfo = &info->devinfo;
ide_drive_t *drive = info->drive;
struct gendisk *g = info->disk;
ide_init_disk(g, drive);
- kref_init(&info->kref);
+ info->dev.parent = &drive->gendev;
+ info->dev.release = ide_cd_release;
+ dev_set_name(&info->dev, dev_name(&drive->gendev));
+
+ if (device_register(&info->dev))
+ goto out_free_disk;
info->drive = drive;
info->driver = &ide_cdrom_driver;
g->driverfs_dev = &drive->gendev;
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
if (ide_cdrom_setup(drive)) {
- ide_cd_release(&info->kref);
+ put_device(&info->dev);
goto failed;
}
add_disk(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_cd:
kfree(info);
failed:
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
/* Buffer for table of contents. NULL if we haven't allocated
a TOC buffer for this device yet. */
static DEFINE_MUTEX(ide_disk_ref_mutex);
-static void ide_disk_release(struct kref *);
+static void ide_disk_release(struct device *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
{
if (ide_device_get(idkp->drive))
idkp = NULL;
else
- kref_get(&idkp->kref);
+ get_device(&idkp->dev);
}
mutex_unlock(&ide_disk_ref_mutex);
return idkp;
ide_drive_t *drive = idkp->drive;
mutex_lock(&ide_disk_ref_mutex);
- kref_put(&idkp->kref, ide_disk_release);
+ put_device(&idkp->dev);
ide_device_put(drive);
mutex_unlock(&ide_disk_ref_mutex);
}
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
-
+ device_del(&idkp->dev);
del_gendisk(g);
-
drive->disk_ops->flush(drive);
- ide_disk_put(idkp);
+ mutex_lock(&ide_disk_ref_mutex);
+ put_device(&idkp->dev);
+ mutex_unlock(&ide_disk_ref_mutex);
}
-static void ide_disk_release(struct kref *kref)
+static void ide_disk_release(struct device *dev)
{
- struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+ struct ide_disk_obj *idkp = to_ide_drv(dev, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
ide_init_disk(g, drive);
- kref_init(&idkp->kref);
+ idkp->dev.parent = &drive->gendev;
+ idkp->dev.release = ide_disk_release;
+ dev_set_name(&idkp->dev, dev_name(&drive->gendev));
+
+ if (device_register(&idkp->dev))
+ goto out_free_disk;
idkp->drive = drive;
idkp->driver = &ide_gd_driver;
add_disk(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_idkp:
kfree(idkp);
failed:
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
unsigned int openers; /* protected by BKL for now */
/* Last failed packet command */
ide_drive_t *drive;
struct ide_driver *driver;
struct gendisk *disk;
- struct kref kref;
+ struct device dev;
/*
* failed_pc points to the last failed packet command, or contains
static struct class *idetape_sysfs_class;
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
{
if (ide_device_get(tape->drive))
tape = NULL;
else
- kref_get(&tape->kref);
+ get_device(&tape->dev);
}
mutex_unlock(&idetape_ref_mutex);
return tape;
ide_drive_t *drive = tape->drive;
mutex_lock(&idetape_ref_mutex);
- kref_put(&tape->kref, ide_tape_release);
+ put_device(&tape->dev);
ide_device_put(drive);
mutex_unlock(&idetape_ref_mutex);
}
mutex_lock(&idetape_ref_mutex);
tape = idetape_devs[i];
if (tape)
- kref_get(&tape->kref);
+ get_device(&tape->dev);
mutex_unlock(&idetape_ref_mutex);
return tape;
}
idetape_tape_t *tape = drive->driver_data;
ide_proc_unregister_driver(drive, tape->driver);
-
+ device_del(&tape->dev);
ide_unregister_region(tape->disk);
- ide_tape_put(tape);
+ mutex_lock(&idetape_ref_mutex);
+ put_device(&tape->dev);
+ mutex_unlock(&idetape_ref_mutex);
}
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
{
- struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
+ struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
ide_init_disk(g, drive);
- kref_init(&tape->kref);
+ tape->dev.parent = &drive->gendev;
+ tape->dev.release = ide_tape_release;
+ dev_set_name(&tape->dev, dev_name(&drive->gendev));
+
+ if (device_register(&tape->dev))
+ goto out_free_disk;
tape->drive = drive;
tape->driver = &idetape_driver;
return 0;
+out_free_disk:
+ put_disk(g);
out_free_tape:
kfree(tape);
failed:
int a, b, i, j = 1;
unsigned int *dev_param_mask = (unsigned int *)kp->arg;
+ /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */
if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
sscanf(s, "%d.%d", &a, &b) != 2)
return -EINVAL;
if (j)
*dev_param_mask |= (1 << i);
else
- *dev_param_mask &= (1 << i);
+ *dev_param_mask &= ~(1 << i);
return 0;
}
{
int a, b, c = 0, h = 0, s = 0, i, j = 1;
+ /* controller . device (0 or 1) : Cylinders , Heads , Sectors */
+ /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */
if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
return -EINVAL;
if (j)
ide_disks |= (1 << i);
else
- ide_disks &= (1 << i);
+ ide_disks &= ~(1 << i);
ide_disks_chs[i].cyl = c;
ide_disks_chs[i].head = h;
{
int i, j = 1;
+ /* controller (ignore) */
+ /* controller : 1 (ignore) | 0 (use) */
if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
return -EINVAL;
if (j)
ide_ignore_cable |= (1 << i);
else
- ide_ignore_cable &= (1 << i);
+ ide_ignore_cable &= ~(1 << i);
return 0;
}
* May be copied or modified under the terms of the GNU General Public License
* Based in part on the ITE vendor provided SCSI driver.
*
- * Documentation available from
- * http://www.ite.com.tw/pc/IT8212F_V04.pdf
- * Some other documents are NDA.
+ * Documentation:
+ * Datasheet is freely available, some other documents under NDA.
*
* The ITE8212 isn't exactly a standard IDE controller. It has two
* modes. In pass through mode then it is an IDE controller. In its smart
#include <asm/types.h>
+struct file;
struct pci_dev;
struct scatterlist;
struct vm_area_struct;
unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
}
-module_init(ieee1394_init);
+fs_initcall(ieee1394_init);
module_exit(ieee1394_cleanup);
/* Exported symbols */
EXPORT_SYMBOL(hpsb_make_phypacket);
EXPORT_SYMBOL(hpsb_read);
EXPORT_SYMBOL(hpsb_write);
+EXPORT_SYMBOL(hpsb_lock);
EXPORT_SYMBOL(hpsb_packet_success);
/** highlevel.c **/
if (length == 0)
return -EINVAL;
- BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
-
packet = hpsb_make_readpacket(host, node, addr, length);
if (!packet) {
if (length == 0)
return -EINVAL;
- BUG_ON(in_interrupt()); // We can't be called in an interrupt, yet
-
packet = hpsb_make_writepacket(host, node, addr, buffer, length);
if (!packet)
return retval;
}
+
+int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+ u64 addr, int extcode, quadlet_t *data, quadlet_t arg)
+{
+ struct hpsb_packet *packet;
+ int retval = 0;
+
+ packet = hpsb_make_lockpacket(host, node, addr, extcode, data, arg);
+ if (!packet)
+ return -ENOMEM;
+
+ packet->generation = generation;
+ retval = hpsb_send_packet_and_wait(packet);
+ if (retval < 0)
+ goto hpsb_lock_fail;
+
+ retval = hpsb_packet_success(packet);
+
+ if (retval == 0)
+ *data = packet->data[0];
+
+hpsb_lock_fail:
+ hpsb_free_tlabel(packet);
+ hpsb_free_packet(packet);
+
+ return retval;
+}
u64 addr, quadlet_t *buffer, size_t length);
int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation,
u64 addr, quadlet_t *buffer, size_t length);
+int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation,
+ u64 addr, int extcode, quadlet_t *data, quadlet_t arg);
#ifdef HPSB_DEBUG_TLABELS
extern spinlock_t hpsb_tlabel_lock;
#define IEEE1394_ISO_H
#include <linux/spinlock_types.h>
+#include <linux/wait.h>
#include <asm/atomic.h>
#include <asm/types.h>
ud->ud_kv = ud_kv;
ud->id = (*id)++;
+ /* inherit vendor_id from root directory if none exists in unit dir */
+ ud->vendor_id = ne->vendor_id;
+
csr1212_for_each_dir_entry(ne->csr, kv, ud_kv, dentry) {
switch (kv->key.id) {
case CSR1212_KV_ID_VENDOR:
csr1212_destroy_csr(csr);
}
- /* Mark the node current */
+ /* Finally, mark the node current */
+ smp_wmb();
ne->generation = generation;
if (ne->in_limbo) {
{
packet->host = ne->host;
packet->generation = ne->generation;
- barrier();
+ smp_rmb();
packet->node_id = ne->nodeid;
}
{
unsigned int generation = ne->generation;
- barrier();
+ smp_rmb();
return hpsb_write(ne->host, ne->nodeid, generation,
addr, buffer, length);
}
#define _IEEE1394_NODEMGR_H
#include <linux/device.h>
+#include <asm/system.h>
#include <asm/types.h>
#include "ieee1394_core.h"
+#include "ieee1394_transactions.h"
#include "ieee1394_types.h"
struct csr1212_csr;
void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *packet);
int hpsb_node_write(struct node_entry *ne, u64 addr,
quadlet_t *buffer, size_t length);
+static inline int hpsb_node_read(struct node_entry *ne, u64 addr,
+ quadlet_t *buffer, size_t length)
+{
+ unsigned int g = ne->generation;
+
+ smp_rmb();
+ return hpsb_read(ne->host, ne->nodeid, g, addr, buffer, length);
+}
+static inline int hpsb_node_lock(struct node_entry *ne, u64 addr, int extcode,
+ quadlet_t *buffer, quadlet_t arg)
+{
+ unsigned int g = ne->generation;
+
+ smp_rmb();
+ return hpsb_lock(ne->host, ne->nodeid, g, addr, extcode, buffer, arg);
+}
int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *));
int init_ieee1394_nodemgr(void);
*/
static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
};
int i;
*/
static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
{
- const unsigned int forced_release_keys[] = {
+ static const unsigned int forced_release_keys[] = {
0x94,
};
int i;
goto out;
}
- if (!pdata->debounce_time || !pdata->debounce_time > MAX_MULT ||
- !pdata->coldrive_time || !pdata->coldrive_time > MAX_MULT) {
+ if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
+ !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
printk(KERN_ERR DRV_NAME
": Invalid Debounce/Columdrive Time from pdata\n");
bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
#define corgikbd_resume NULL
#endif
-static int __init corgikbd_probe(struct platform_device *pdev)
+static int __devinit corgikbd_probe(struct platform_device *pdev)
{
struct corgikbd *corgikbd;
struct input_dev *input_dev;
return err;
}
-static int corgikbd_remove(struct platform_device *pdev)
+static int __devexit corgikbd_remove(struct platform_device *pdev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(pdev);
static struct platform_driver corgikbd_driver = {
.probe = corgikbd_probe,
- .remove = corgikbd_remove,
+ .remove = __devexit_p(corgikbd_remove),
.suspend = corgikbd_suspend,
.resume = corgikbd_resume,
.driver = {
},
};
-static int __devinit corgikbd_init(void)
+static int __init corgikbd_init(void)
{
return platform_driver_register(&corgikbd_driver);
}
#define omap_kp_resume NULL
#endif
-static int __init omap_kp_probe(struct platform_device *pdev)
+static int __devinit omap_kp_probe(struct platform_device *pdev)
{
struct omap_kp *omap_kp;
struct input_dev *input_dev;
return -EINVAL;
}
-static int omap_kp_remove(struct platform_device *pdev)
+static int __devexit omap_kp_remove(struct platform_device *pdev)
{
struct omap_kp *omap_kp = platform_get_drvdata(pdev);
static struct platform_driver omap_kp_driver = {
.probe = omap_kp_probe,
- .remove = omap_kp_remove,
+ .remove = __devexit_p(omap_kp_remove),
.suspend = omap_kp_suspend,
.resume = omap_kp_resume,
.driver = {
},
};
-static int __devinit omap_kp_init(void)
+static int __init omap_kp_init(void)
{
printk(KERN_INFO "OMAP Keypad Driver\n");
return platform_driver_register(&omap_kp_driver);
#define spitzkbd_resume NULL
#endif
-static int __init spitzkbd_probe(struct platform_device *dev)
+static int __devinit spitzkbd_probe(struct platform_device *dev)
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
return err;
}
-static int spitzkbd_remove(struct platform_device *dev)
+static int __devexit spitzkbd_remove(struct platform_device *dev)
{
int i;
struct spitzkbd *spitzkbd = platform_get_drvdata(dev);
static struct platform_driver spitzkbd_driver = {
.probe = spitzkbd_probe,
- .remove = spitzkbd_remove,
+ .remove = __devexit_p(spitzkbd_remove),
.suspend = spitzkbd_suspend,
.resume = spitzkbd_resume,
.driver = {
},
};
-static int __devinit spitzkbd_init(void)
+static int __init spitzkbd_init(void)
{
return platform_driver_register(&spitzkbd_driver);
}
config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
default y
- depends on MOUSE_PS2
+ depends on MOUSE_PS2 && X86
help
Say Y here if you have a Fujitsu B-series Lifebook PS/2
TouchScreen connected to your system.
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
- pr_err("elantech.c: sending Elantech magic knock failed.\n");
+ pr_debug("elantech.c: sending Elantech magic knock failed.\n");
return -1;
}
* set of magic numbers
*/
if (param[0] != 0x3c || param[1] != 0x03 || param[2] != 0xc8) {
- pr_info("elantech.c: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
+ pr_debug("elantech.c: "
+ "unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+ return -1;
+ }
+
+ /*
+ * Query touchpad's firmware version and see if it reports known
+ * value to avoid mis-detection. Logitech mice are known to respond
+ * to Elantech magic knock and there might be more.
+ */
+ if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
+ pr_debug("elantech.c: failed to query firmware version.\n");
+ return -1;
+ }
+
+ pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
+ param[0], param[1], param[2]);
+
+ if (param[0] == 0 || param[1] != 0) {
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
return -1;
}
int i, error;
unsigned char param[3];
- etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
- psmouse->private = etd;
+ psmouse->private = etd = kzalloc(sizeof(struct elantech_data), GFP_KERNEL);
if (!etd)
return -1;
etd->parity[i] = etd->parity[i & (i - 1)] ^ 1;
/*
- * Find out what version hardware this is
+ * Do the version query again so we can store the result
*/
if (synaptics_send_cmd(psmouse, ETP_FW_VERSION_QUERY, param)) {
pr_err("elantech.c: failed to query firmware version.\n");
goto init_fail;
}
- pr_info("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
- param[0], param[1], param[2]);
etd->fw_version_maj = param[0];
etd->fw_version_min = param[2];
__raw_writel(v, trkball->mmio_base + TBCR);
- while (i--) {
+ while (--i) {
if (__raw_readl(trkball->mmio_base + TBCR) == v)
break;
msleep(1);
static int synaptics_query_hardware(struct psmouse *psmouse)
{
- int retries = 0;
-
- while ((retries++ < 3) && psmouse_reset(psmouse))
- /* empty */;
-
if (synaptics_identify(psmouse))
return -1;
if (synaptics_model_id(psmouse))
struct synaptics_data *priv = psmouse->private;
struct synaptics_data old_priv = *priv;
+ psmouse_reset(psmouse);
+
if (synaptics_detect(psmouse, 0))
return -1;
if (!priv)
return -1;
+ psmouse_reset(psmouse);
+
if (synaptics_query_hardware(psmouse)) {
printk(KERN_ERR "Unable to query Synaptics hardware.\n");
goto init_fail;
struct amba_kmi_port *kmi = io->port_data;
unsigned int timeleft = 10000; /* timeout in 100ms */
- while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && timeleft--)
+ while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft)
udelay(10);
if (timeleft)
io->write = amba_kmi_write;
io->open = amba_kmi_open;
io->close = amba_kmi_close;
- strlcpy(io->name, dev->dev.bus_id, sizeof(io->name));
- strlcpy(io->phys, dev->dev.bus_id, sizeof(io->phys));
+ strlcpy(io->name, dev_name(&dev->dev), sizeof(io->name));
+ strlcpy(io->phys, dev_name(&dev->dev), sizeof(io->phys));
io->port_data = kmi;
io->dev.parent = &dev->dev;
snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
serio->write = gscps2_write;
serio->open = gscps2_open;
serio->write = ps2_write;
serio->open = ps2_open;
serio->close = ps2_close;
- strlcpy(serio->name, dev->dev.bus_id, sizeof(serio->name));
- strlcpy(serio->phys, dev->dev.bus_id, sizeof(serio->phys));
+ strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
+ strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->port_data = ps2if;
serio->dev.parent = &dev->dev;
ps2if->io = serio;
ts_dev->bufferedmeasure = 0;
snprintf(ts_dev->phys, sizeof(ts_dev->phys),
- "%s/input0", pdev->dev.bus_id);
+ "%s/input0", dev_name(&pdev->dev));
input_dev->name = "atmel touch screen controller";
input_dev->phys = ts_dev->phys;
#define corgits_resume NULL
#endif
-static int __init corgits_probe(struct platform_device *pdev)
+static int __devinit corgits_probe(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts;
struct input_dev *input_dev;
return err;
}
-static int corgits_remove(struct platform_device *pdev)
+static int __devexit corgits_remove(struct platform_device *pdev)
{
struct corgi_ts *corgi_ts = platform_get_drvdata(pdev);
corgi_ts->machinfo->put_hsync();
input_unregister_device(corgi_ts->input);
kfree(corgi_ts);
+
return 0;
}
static struct platform_driver corgits_driver = {
.probe = corgits_probe,
- .remove = corgits_remove,
+ .remove = __devexit_p(corgits_remove),
.suspend = corgits_suspend,
.resume = corgits_resume,
.driver = {
},
};
-static int __devinit corgits_init(void)
+static int __init corgits_init(void)
{
return platform_driver_register(&corgits_driver);
}
pdata->init_platform_hw();
- snprintf(ts->phys, sizeof(ts->phys), "%s/input0", client->dev.bus_id);
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input0", dev_name(&client->dev));
input_dev->name = "TSC2007 Touchscreen";
input_dev->phys = ts->phys;
module_param(swap_xy, bool, 0644);
MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+static int hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
/* device specifc data/functions */
struct usbtouch_usb;
struct usbtouch_device_info {
#define USB_DEVICE_HID_CLASS(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+ | USB_DEVICE_ID_MATCH_INT_PROTOCOL \
| USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod), \
static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
- dev->x = (pkt[8] << 8) | pkt[7];
- dev->y = (pkt[10] << 8) | pkt[9];
+ if (hwcalib_xy) {
+ dev->x = (pkt[4] << 8) | pkt[3];
+ dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+ } else {
+ dev->x = (pkt[8] << 8) | pkt[7];
+ dev->y = (pkt[10] << 8) | pkt[9];
+ }
dev->touch = (pkt[2] & 0x40) ? 1 : 0;
return 1;
return ret;
}
+ /* Default min/max xy are the raw values, override if using hw-calib */
+ if (hwcalib_xy) {
+ input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+ }
+
return 0;
}
#endif
spin_unlock_irqrestore(&sc_adapter[card]->lock, flags);
pr_debug("%s: set page to %#x\n",sc_adapter[card]->devicename,
((sc_adapter[card]->shmem_magic + ch * SRAM_PAGESIZE)>>14)|0x80);
- pr_debug("%s: copying %d bytes from %#lx to %#lx\n",
+ pr_debug("%s: copying %zu bytes from %#lx to %#lx\n",
sc_adapter[card]->devicename, n,
(unsigned long) src,
sc_adapter[card]->rambase + ((unsigned long) dest %0x4000));
update_head_pos(mirror, r1_bio);
if (atomic_dec_and_test(&r1_bio->remaining)) {
- md_done_sync(mddev, r1_bio->sectors, uptodate);
+ sector_t s = r1_bio->sectors;
put_buf(r1_bio);
+ md_done_sync(mddev, s, uptodate);
}
}
/* for reconstruct, we always reschedule after a read.
* for resync, only after all reads
*/
+ rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
if (test_bit(R10BIO_IsRecover, &r10_bio->state) ||
atomic_dec_and_test(&r10_bio->remaining)) {
/* we have read all the blocks,
*/
reschedule_retry(r10_bio);
}
- rdev_dec_pending(conf->mirrors[d].rdev, conf->mddev);
}
static void end_sync_write(struct bio *bio, int error)
update_head_pos(i, r10_bio);
+ rdev_dec_pending(conf->mirrors[d].rdev, mddev);
while (atomic_dec_and_test(&r10_bio->remaining)) {
if (r10_bio->master_bio == NULL) {
/* the primary of several recovery bios */
- md_done_sync(mddev, r10_bio->sectors, 1);
+ sector_t s = r10_bio->sectors;
put_buf(r10_bio);
+ md_done_sync(mddev, s, 1);
break;
} else {
r10bio_t *r10_bio2 = (r10bio_t *)r10_bio->master_bio;
r10_bio = r10_bio2;
}
}
- rdev_dec_pending(conf->mirrors[d].rdev, mddev);
}
/*
if (!go_faster && conf->nr_waiting)
msleep_interruptible(1000);
- bitmap_cond_end_sync(mddev->bitmap, sector_nr);
-
/* Again, very different code for resync and recovery.
* Both must result in an r10bio with a list of bios that
* have bi_end_io, bi_sector, bi_bdev set,
/* resync. Schedule a read for every block at this virt offset */
int count = 0;
+ bitmap_cond_end_sync(mddev->bitmap, sector_nr);
+
if (!bitmap_start_sync(mddev->bitmap, sector_nr,
&sync_blocks, mddev->degraded) &&
!conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* There is nowhere to write, so all non-sync
* drives must be failed, so try the next chunk...
*/
- {
- sector_t sec = max_sector - sector_nr;
- sectors_skipped += sec;
+ if (sector_nr + max_sync < max_sector)
+ max_sector = sector_nr + max_sync;
+
+ sectors_skipped += (max_sector - sector_nr);
chunks_skipped ++;
sector_nr = max_sector;
goto skipped;
- }
}
static int run(mddev_t *mddev)
depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/dm1105/Kconfig"
+comment "Supported FireWire (IEEE 1394) Adapters"
+ depends on DVB_CORE && IEEE1394
+source "drivers/media/dvb/firewire/Kconfig"
+
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
#
obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/
+
+obj-$(CONFIG_DVB_FIREDTV) += firewire/
return 0;
}
+EXPORT_SYMBOL(flexcop_pid_feed_control);
void flexcop_hw_filter_init(struct flexcop_device *fc)
{
module_param(enable_pid_filtering, int, 0444);
MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1");
-static int irq_chk_intv;
+static int irq_chk_intv = 100;
module_param(irq_chk_intv, int, 0644);
-MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging).");
+MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define dprintk(level,args...) \
static int debug;
module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS);
+MODULE_PARM_DESC(debug,
+ "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
+ DEBSTATUS);
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */
int count;
+ int count_prev;
+ int stream_problem;
spinlock_t irq_lock;
container_of(work, struct flexcop_pci, irq_check_work.work);
struct flexcop_device *fc = fc_pci->fc_dev;
- flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
-
- flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4);
-
- if (v.sram_dest_reg_714.net_ovflow_error)
- deb_chk("sram net_ovflow_error\n");
- if (v.sram_dest_reg_714.media_ovflow_error)
- deb_chk("sram media_ovflow_error\n");
- if (v.sram_dest_reg_714.cai_ovflow_error)
- deb_chk("sram cai_ovflow_error\n");
- if (v.sram_dest_reg_714.cai_ovflow_error)
- deb_chk("sram cai_ovflow_error\n");
+ if (fc->feedcount) {
+
+ if (fc_pci->count == fc_pci->count_prev) {
+ deb_chk("no IRQ since the last check\n");
+ if (fc_pci->stream_problem++ == 3) {
+ struct dvb_demux_feed *feed;
+
+ spin_lock_irq(&fc->demux.lock);
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 0);
+ }
+
+ list_for_each_entry(feed, &fc->demux.feed_list,
+ list_head) {
+ flexcop_pid_feed_control(fc, feed, 1);
+ }
+ spin_unlock_irq(&fc->demux.lock);
+
+ fc_pci->stream_problem = 0;
+ }
+ } else {
+ fc_pci->stream_problem = 0;
+ fc_pci->count_prev = fc_pci->count;
+ }
+ }
schedule_delayed_work(&fc_pci->irq_check_work,
msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
flexcop_dma_control_timer_irq(fc,FC_DMA_1,1);
deb_irq("IRQ enabled\n");
+ fc_pci->count_prev = fc_pci->count;
+
// fc_pci->active_dma1_addr = 0;
// flexcop_dma_control_size_irq(fc,FC_DMA_1,1);
- if (irq_chk_intv > 0)
- schedule_delayed_work(&fc_pci->irq_check_work,
- msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
} else {
- if (irq_chk_intv > 0)
- cancel_delayed_work(&fc_pci->irq_check_work);
-
flexcop_dma_control_timer_irq(fc,FC_DMA_1,0);
deb_irq("IRQ disabled\n");
IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0)
goto err_pci_iounmap;
-
-
fc_pci->init_state |= FC_PCI_INIT;
return ret;
INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
+ if (irq_chk_intv > 0)
+ schedule_delayed_work(&fc_pci->irq_check_work,
+ msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv));
+
return ret;
err_fc_exit:
{
struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
+ if (irq_chk_intv > 0)
+ cancel_delayed_work(&fc_pci->irq_check_work);
+
flexcop_pci_dma_exit(fc_pci);
flexcop_device_exit(fc_pci->fc_dev);
flexcop_pci_exit(fc_pci);
v210.sw_reset_210.Block_reset_enable = 0xb2;
fc->write_ibi_reg(fc,sw_reset_210,v210);
- msleep(1);
-
+ udelay(1000);
fc->write_ibi_reg(fc,ctrl_208,v208_save);
}
--- /dev/null
+config DVB_FIREDTV
+ tristate "FireDTV and FloppyDTV"
+ depends on DVB_CORE && IEEE1394
+ help
+ Support for DVB receivers from Digital Everywhere
+ which are connected via IEEE 1394 (FireWire).
+
+ These devices don't have an MPEG decoder built in,
+ so you need an external software decoder to watch TV.
+
+ To compile this driver as a module, say M here:
+ the module will be called firedtv.
+
+if DVB_FIREDTV
+
+config DVB_FIREDTV_IEEE1394
+ def_bool IEEE1394
+
+config DVB_FIREDTV_INPUT
+ def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
+
+endif # DVB_FIREDTV
--- /dev/null
+obj-$(CONFIG_DVB_FIREDTV) += firedtv.o
+
+firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o
+firedtv-$(CONFIG_DVB_FIREDTV_IEEE1394) += firedtv-1394.o
+firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o
+
+ccflags-y += -Idrivers/media/dvb/dvb-core
+ccflags-$(CONFIG_DVB_FIREDTV_IEEE1394) += -Idrivers/ieee1394
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2007-2008 Ben Backx <ben@bbackx.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <dma.h>
+#include <csr1212.h>
+#include <highlevel.h>
+#include <hosts.h>
+#include <ieee1394.h>
+#include <iso.h>
+#include <nodemgr.h>
+
+#include "firedtv.h"
+
+static LIST_HEAD(node_list);
+static DEFINE_SPINLOCK(node_list_lock);
+
+#define FIREWIRE_HEADER_SIZE 4
+#define CIP_HEADER_SIZE 8
+
+static void rawiso_activity_cb(struct hpsb_iso *iso)
+{
+ struct firedtv *f, *fdtv = NULL;
+ unsigned int i, num, packet;
+ unsigned char *buf;
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(&node_list_lock, flags);
+ list_for_each_entry(f, &node_list, list)
+ if (f->backend_data == iso) {
+ fdtv = f;
+ break;
+ }
+ spin_unlock_irqrestore(&node_list_lock, flags);
+
+ packet = iso->first_packet;
+ num = hpsb_iso_n_ready(iso);
+
+ if (!fdtv) {
+ dev_err(fdtv->device, "received at unknown iso channel\n");
+ goto out;
+ }
+
+ for (i = 0; i < num; i++, packet = (packet + 1) % iso->buf_packets) {
+ buf = dma_region_i(&iso->data_buf, unsigned char,
+ iso->infos[packet].offset + CIP_HEADER_SIZE);
+ count = (iso->infos[packet].len - CIP_HEADER_SIZE) /
+ (188 + FIREWIRE_HEADER_SIZE);
+
+ /* ignore empty packet */
+ if (iso->infos[packet].len <= CIP_HEADER_SIZE)
+ continue;
+
+ while (count--) {
+ if (buf[FIREWIRE_HEADER_SIZE] == 0x47)
+ dvb_dmx_swfilter_packets(&fdtv->demux,
+ &buf[FIREWIRE_HEADER_SIZE], 1);
+ else
+ dev_err(fdtv->device,
+ "skipping invalid packet\n");
+ buf += 188 + FIREWIRE_HEADER_SIZE;
+ }
+ }
+out:
+ hpsb_iso_recv_release_packets(iso, num);
+}
+
+static inline struct node_entry *node_of(struct firedtv *fdtv)
+{
+ return container_of(fdtv->device, struct unit_directory, device)->ne;
+}
+
+static int node_lock(struct firedtv *fdtv, u64 addr, void *data, __be32 arg)
+{
+ return hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP, data,
+ (__force quadlet_t)arg);
+}
+
+static int node_read(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+{
+ return hpsb_node_read(node_of(fdtv), addr, data, len);
+}
+
+static int node_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+{
+ return hpsb_node_write(node_of(fdtv), addr, data, len);
+}
+
+#define FDTV_ISO_BUFFER_PACKETS 256
+#define FDTV_ISO_BUFFER_SIZE (FDTV_ISO_BUFFER_PACKETS * 200)
+
+static int start_iso(struct firedtv *fdtv)
+{
+ struct hpsb_iso *iso_handle;
+ int ret;
+
+ iso_handle = hpsb_iso_recv_init(node_of(fdtv)->host,
+ FDTV_ISO_BUFFER_SIZE, FDTV_ISO_BUFFER_PACKETS,
+ fdtv->isochannel, HPSB_ISO_DMA_DEFAULT,
+ -1, /* stat.config.irq_interval */
+ rawiso_activity_cb);
+ if (iso_handle == NULL) {
+ dev_err(fdtv->device, "cannot initialize iso receive\n");
+ return -ENOMEM;
+ }
+ fdtv->backend_data = iso_handle;
+
+ ret = hpsb_iso_recv_start(iso_handle, -1, -1, 0);
+ if (ret != 0) {
+ dev_err(fdtv->device, "cannot start iso receive\n");
+ hpsb_iso_shutdown(iso_handle);
+ fdtv->backend_data = NULL;
+ }
+ return ret;
+}
+
+static void stop_iso(struct firedtv *fdtv)
+{
+ struct hpsb_iso *iso_handle = fdtv->backend_data;
+
+ if (iso_handle != NULL) {
+ hpsb_iso_stop(iso_handle);
+ hpsb_iso_shutdown(iso_handle);
+ }
+ fdtv->backend_data = NULL;
+}
+
+static const struct firedtv_backend fdtv_1394_backend = {
+ .lock = node_lock,
+ .read = node_read,
+ .write = node_write,
+ .start_iso = start_iso,
+ .stop_iso = stop_iso,
+};
+
+static void fcp_request(struct hpsb_host *host, int nodeid, int direction,
+ int cts, u8 *data, size_t length)
+{
+ struct firedtv *f, *fdtv = NULL;
+ unsigned long flags;
+ int su;
+
+ if (length == 0 || (data[0] & 0xf0) != 0)
+ return;
+
+ su = data[1] & 0x7;
+
+ spin_lock_irqsave(&node_list_lock, flags);
+ list_for_each_entry(f, &node_list, list)
+ if (node_of(f)->host == host &&
+ node_of(f)->nodeid == nodeid &&
+ (f->subunit == su || (f->subunit == 0 && su == 0x7))) {
+ fdtv = f;
+ break;
+ }
+ spin_unlock_irqrestore(&node_list_lock, flags);
+
+ if (fdtv)
+ avc_recv(fdtv, data, length);
+}
+
+static int node_probe(struct device *dev)
+{
+ struct unit_directory *ud =
+ container_of(dev, struct unit_directory, device);
+ struct firedtv *fdtv;
+ int kv_len, err;
+ void *kv_str;
+
+ kv_len = (ud->model_name_kv->value.leaf.len - 2) * sizeof(quadlet_t);
+ kv_str = CSR1212_TEXTUAL_DESCRIPTOR_LEAF_DATA(ud->model_name_kv);
+
+ fdtv = fdtv_alloc(dev, &fdtv_1394_backend, kv_str, kv_len);
+ if (!fdtv)
+ return -ENOMEM;
+
+ /*
+ * Work around a bug in udev's path_id script: Use the fw-host's dev
+ * instead of the unit directory's dev as parent of the input device.
+ */
+ err = fdtv_register_rc(fdtv, dev->parent->parent);
+ if (err)
+ goto fail_free;
+
+ spin_lock_irq(&node_list_lock);
+ list_add_tail(&fdtv->list, &node_list);
+ spin_unlock_irq(&node_list_lock);
+
+ err = avc_identify_subunit(fdtv);
+ if (err)
+ goto fail;
+
+ err = fdtv_dvb_register(fdtv);
+ if (err)
+ goto fail;
+
+ avc_register_remote_control(fdtv);
+ return 0;
+fail:
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+ fdtv_unregister_rc(fdtv);
+fail_free:
+ kfree(fdtv);
+ return err;
+}
+
+static int node_remove(struct device *dev)
+{
+ struct firedtv *fdtv = dev->driver_data;
+
+ fdtv_dvb_unregister(fdtv);
+
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+
+ cancel_work_sync(&fdtv->remote_ctrl_work);
+ fdtv_unregister_rc(fdtv);
+
+ kfree(fdtv);
+ return 0;
+}
+
+static int node_update(struct unit_directory *ud)
+{
+ struct firedtv *fdtv = ud->device.driver_data;
+
+ if (fdtv->isochannel >= 0)
+ cmp_establish_pp_connection(fdtv, fdtv->subunit,
+ fdtv->isochannel);
+ return 0;
+}
+
+static struct hpsb_protocol_driver fdtv_driver = {
+ .name = "firedtv",
+ .update = node_update,
+ .driver = {
+ .probe = node_probe,
+ .remove = node_remove,
+ },
+};
+
+static struct hpsb_highlevel fdtv_highlevel = {
+ .name = "firedtv",
+ .fcp_request = fcp_request,
+};
+
+int __init fdtv_1394_init(struct ieee1394_device_id id_table[])
+{
+ int ret;
+
+ hpsb_register_highlevel(&fdtv_highlevel);
+ fdtv_driver.id_table = id_table;
+ ret = hpsb_register_protocol(&fdtv_driver);
+ if (ret) {
+ printk(KERN_ERR "firedtv: failed to register protocol\n");
+ hpsb_unregister_highlevel(&fdtv_highlevel);
+ }
+ return ret;
+}
+
+void __exit fdtv_1394_exit(void)
+{
+ hpsb_unregister_protocol(&fdtv_driver);
+ hpsb_unregister_highlevel(&fdtv_highlevel);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Ben Backx <ben@bbackx.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/stringify.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include "firedtv.h"
+
+#define FCP_COMMAND_REGISTER 0xfffff0000b00ULL
+
+#define AVC_CTYPE_CONTROL 0x0
+#define AVC_CTYPE_STATUS 0x1
+#define AVC_CTYPE_NOTIFY 0x3
+
+#define AVC_RESPONSE_ACCEPTED 0x9
+#define AVC_RESPONSE_STABLE 0xc
+#define AVC_RESPONSE_CHANGED 0xd
+#define AVC_RESPONSE_INTERIM 0xf
+
+#define AVC_SUBUNIT_TYPE_TUNER (0x05 << 3)
+#define AVC_SUBUNIT_TYPE_UNIT (0x1f << 3)
+
+#define AVC_OPCODE_VENDOR 0x00
+#define AVC_OPCODE_READ_DESCRIPTOR 0x09
+#define AVC_OPCODE_DSIT 0xc8
+#define AVC_OPCODE_DSD 0xcb
+
+#define DESCRIPTOR_TUNER_STATUS 0x80
+#define DESCRIPTOR_SUBUNIT_IDENTIFIER 0x00
+
+#define SFE_VENDOR_DE_COMPANYID_0 0x00 /* OUI of Digital Everywhere */
+#define SFE_VENDOR_DE_COMPANYID_1 0x12
+#define SFE_VENDOR_DE_COMPANYID_2 0x87
+
+#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a
+#define SFE_VENDOR_OPCODE_LNB_CONTROL 0x52
+#define SFE_VENDOR_OPCODE_TUNE_QPSK 0x58 /* for DVB-S */
+
+#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION 0x00
+#define SFE_VENDOR_OPCODE_HOST2CA 0x56
+#define SFE_VENDOR_OPCODE_CA2HOST 0x57
+#define SFE_VENDOR_OPCODE_CISTATUS 0x59
+#define SFE_VENDOR_OPCODE_TUNE_QPSK2 0x60 /* for DVB-S2 */
+
+#define SFE_VENDOR_TAG_CA_RESET 0x00
+#define SFE_VENDOR_TAG_CA_APPLICATION_INFO 0x01
+#define SFE_VENDOR_TAG_CA_PMT 0x02
+#define SFE_VENDOR_TAG_CA_DATE_TIME 0x04
+#define SFE_VENDOR_TAG_CA_MMI 0x05
+#define SFE_VENDOR_TAG_CA_ENTER_MENU 0x07
+
+#define EN50221_LIST_MANAGEMENT_ONLY 0x03
+#define EN50221_TAG_APP_INFO 0x9f8021
+#define EN50221_TAG_CA_INFO 0x9f8031
+
+struct avc_command_frame {
+ int length;
+ u8 ctype;
+ u8 subunit;
+ u8 opcode;
+ u8 operand[509];
+};
+
+struct avc_response_frame {
+ int length;
+ u8 response;
+ u8 subunit;
+ u8 opcode;
+ u8 operand[509];
+};
+
+#define AVC_DEBUG_FCP_SUBACTIONS 1
+#define AVC_DEBUG_FCP_PAYLOADS 2
+
+static int avc_debug;
+module_param_named(debug, avc_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Verbose logging (default = 0"
+ ", FCP subactions = " __stringify(AVC_DEBUG_FCP_SUBACTIONS)
+ ", FCP payloads = " __stringify(AVC_DEBUG_FCP_PAYLOADS)
+ ", or all = -1)");
+
+static const char *debug_fcp_ctype(unsigned int ctype)
+{
+ static const char *ctypes[] = {
+ [0x0] = "CONTROL", [0x1] = "STATUS",
+ [0x2] = "SPECIFIC INQUIRY", [0x3] = "NOTIFY",
+ [0x4] = "GENERAL INQUIRY", [0x8] = "NOT IMPLEMENTED",
+ [0x9] = "ACCEPTED", [0xa] = "REJECTED",
+ [0xb] = "IN TRANSITION", [0xc] = "IMPLEMENTED/STABLE",
+ [0xd] = "CHANGED", [0xf] = "INTERIM",
+ };
+ const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL;
+
+ return ret ? ret : "?";
+}
+
+static const char *debug_fcp_opcode(unsigned int opcode,
+ const u8 *data, size_t length)
+{
+ switch (opcode) {
+ case AVC_OPCODE_VENDOR: break;
+ case AVC_OPCODE_READ_DESCRIPTOR: return "ReadDescriptor";
+ case AVC_OPCODE_DSIT: return "DirectSelectInfo.Type";
+ case AVC_OPCODE_DSD: return "DirectSelectData";
+ default: return "?";
+ }
+
+ if (length < 7 ||
+ data[3] != SFE_VENDOR_DE_COMPANYID_0 ||
+ data[4] != SFE_VENDOR_DE_COMPANYID_1 ||
+ data[5] != SFE_VENDOR_DE_COMPANYID_2)
+ return "Vendor";
+
+ switch (data[6]) {
+ case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL: return "RegisterRC";
+ case SFE_VENDOR_OPCODE_LNB_CONTROL: return "LNBControl";
+ case SFE_VENDOR_OPCODE_TUNE_QPSK: return "TuneQPSK";
+ case SFE_VENDOR_OPCODE_HOST2CA: return "Host2CA";
+ case SFE_VENDOR_OPCODE_CA2HOST: return "CA2Host";
+ }
+ return "Vendor";
+}
+
+static void debug_fcp(const u8 *data, size_t length)
+{
+ unsigned int subunit_type, subunit_id, op;
+ const char *prefix = data[0] > 7 ? "FCP <- " : "FCP -> ";
+
+ if (avc_debug & AVC_DEBUG_FCP_SUBACTIONS) {
+ subunit_type = data[1] >> 3;
+ subunit_id = data[1] & 7;
+ op = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2];
+ printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
+ prefix, subunit_type, subunit_id, length,
+ debug_fcp_ctype(data[0]),
+ debug_fcp_opcode(op, data, length));
+ }
+
+ if (avc_debug & AVC_DEBUG_FCP_PAYLOADS)
+ print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE, 16, 1,
+ data, length, false);
+}
+
+static int __avc_write(struct firedtv *fdtv,
+ const struct avc_command_frame *c, struct avc_response_frame *r)
+{
+ int err, retry;
+
+ if (r)
+ fdtv->avc_reply_received = false;
+
+ for (retry = 0; retry < 6; retry++) {
+ if (unlikely(avc_debug))
+ debug_fcp(&c->ctype, c->length);
+
+ err = fdtv->backend->write(fdtv, FCP_COMMAND_REGISTER,
+ (void *)&c->ctype, c->length);
+ if (err) {
+ fdtv->avc_reply_received = true;
+ dev_err(fdtv->device, "FCP command write failed\n");
+ return err;
+ }
+
+ if (!r)
+ return 0;
+
+ /*
+ * AV/C specs say that answers should be sent within 150 ms.
+ * Time out after 200 ms.
+ */
+ if (wait_event_timeout(fdtv->avc_wait,
+ fdtv->avc_reply_received,
+ msecs_to_jiffies(200)) != 0) {
+ r->length = fdtv->response_length;
+ memcpy(&r->response, fdtv->response, r->length);
+
+ return 0;
+ }
+ }
+ dev_err(fdtv->device, "FCP response timed out\n");
+ return -ETIMEDOUT;
+}
+
+static int avc_write(struct firedtv *fdtv,
+ const struct avc_command_frame *c, struct avc_response_frame *r)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = __avc_write(fdtv, c, r);
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+int avc_recv(struct firedtv *fdtv, void *data, size_t length)
+{
+ struct avc_response_frame *r =
+ data - offsetof(struct avc_response_frame, response);
+
+ if (unlikely(avc_debug))
+ debug_fcp(data, length);
+
+ if (length >= 8 &&
+ r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
+ r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
+ r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
+ r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL) {
+ if (r->response == AVC_RESPONSE_CHANGED) {
+ fdtv_handle_rc(fdtv,
+ r->operand[4] << 8 | r->operand[5]);
+ schedule_work(&fdtv->remote_ctrl_work);
+ } else if (r->response != AVC_RESPONSE_INTERIM) {
+ dev_info(fdtv->device,
+ "remote control result = %d\n", r->response);
+ }
+ return 0;
+ }
+
+ if (fdtv->avc_reply_received) {
+ dev_err(fdtv->device, "out-of-order AVC response, ignored\n");
+ return -EIO;
+ }
+
+ memcpy(fdtv->response, data, length);
+ fdtv->response_length = length;
+
+ fdtv->avc_reply_received = true;
+ wake_up(&fdtv->avc_wait);
+
+ return 0;
+}
+
+/*
+ * tuning command for setting the relative LNB frequency
+ * (not supported by the AVC standard)
+ */
+static void avc_tuner_tuneqpsk(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK;
+
+ c->operand[4] = (params->frequency >> 24) & 0xff;
+ c->operand[5] = (params->frequency >> 16) & 0xff;
+ c->operand[6] = (params->frequency >> 8) & 0xff;
+ c->operand[7] = params->frequency & 0xff;
+
+ c->operand[8] = ((params->u.qpsk.symbol_rate / 1000) >> 8) & 0xff;
+ c->operand[9] = (params->u.qpsk.symbol_rate / 1000) & 0xff;
+
+ switch (params->u.qpsk.fec_inner) {
+ case FEC_1_2: c->operand[10] = 0x1; break;
+ case FEC_2_3: c->operand[10] = 0x2; break;
+ case FEC_3_4: c->operand[10] = 0x3; break;
+ case FEC_5_6: c->operand[10] = 0x4; break;
+ case FEC_7_8: c->operand[10] = 0x5; break;
+ case FEC_4_5:
+ case FEC_8_9:
+ case FEC_AUTO:
+ default: c->operand[10] = 0x0;
+ }
+
+ if (fdtv->voltage == 0xff)
+ c->operand[11] = 0xff;
+ else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */
+ c->operand[11] = 0;
+ else
+ c->operand[11] = 1;
+
+ if (fdtv->tone == 0xff)
+ c->operand[12] = 0xff;
+ else if (fdtv->tone == SEC_TONE_ON) /* band */
+ c->operand[12] = 1;
+ else
+ c->operand[12] = 0;
+
+ if (fdtv->type == FIREDTV_DVB_S2) {
+ c->operand[13] = 0x1;
+ c->operand[14] = 0xff;
+ c->operand[15] = 0xff;
+ c->length = 20;
+ } else {
+ c->length = 16;
+ }
+}
+
+static void avc_tuner_dsd_dvb_c(struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x11; /* system_specific_multiplex selection_length */
+
+ /* multiplex_valid_flags, high byte */
+ c->operand[5] = 0 << 7 /* reserved */
+ | 0 << 6 /* Polarisation */
+ | 0 << 5 /* Orbital_Pos */
+ | 1 << 4 /* Frequency */
+ | 1 << 3 /* Symbol_Rate */
+ | 0 << 2 /* FEC_outer */
+ | (params->u.qam.fec_inner != FEC_AUTO ? 1 << 1 : 0)
+ | (params->u.qam.modulation != QAM_AUTO ? 1 << 0 : 0);
+
+ /* multiplex_valid_flags, low byte */
+ c->operand[6] = 0 << 7 /* NetworkID */
+ | 0 << 0 /* reserved */ ;
+
+ c->operand[7] = 0x00;
+ c->operand[8] = 0x00;
+ c->operand[9] = 0x00;
+ c->operand[10] = 0x00;
+
+ c->operand[11] = (((params->frequency / 4000) >> 16) & 0xff) | (2 << 6);
+ c->operand[12] = ((params->frequency / 4000) >> 8) & 0xff;
+ c->operand[13] = (params->frequency / 4000) & 0xff;
+ c->operand[14] = ((params->u.qpsk.symbol_rate / 1000) >> 12) & 0xff;
+ c->operand[15] = ((params->u.qpsk.symbol_rate / 1000) >> 4) & 0xff;
+ c->operand[16] = ((params->u.qpsk.symbol_rate / 1000) << 4) & 0xf0;
+ c->operand[17] = 0x00;
+
+ switch (params->u.qpsk.fec_inner) {
+ case FEC_1_2: c->operand[18] = 0x1; break;
+ case FEC_2_3: c->operand[18] = 0x2; break;
+ case FEC_3_4: c->operand[18] = 0x3; break;
+ case FEC_5_6: c->operand[18] = 0x4; break;
+ case FEC_7_8: c->operand[18] = 0x5; break;
+ case FEC_8_9: c->operand[18] = 0x6; break;
+ case FEC_4_5: c->operand[18] = 0x8; break;
+ case FEC_AUTO:
+ default: c->operand[18] = 0x0;
+ }
+
+ switch (params->u.qam.modulation) {
+ case QAM_16: c->operand[19] = 0x08; break;
+ case QAM_32: c->operand[19] = 0x10; break;
+ case QAM_64: c->operand[19] = 0x18; break;
+ case QAM_128: c->operand[19] = 0x20; break;
+ case QAM_256: c->operand[19] = 0x28; break;
+ case QAM_AUTO:
+ default: c->operand[19] = 0x00;
+ }
+
+ c->operand[20] = 0x00;
+ c->operand[21] = 0x00;
+ /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+ c->operand[22] = 0x00;
+
+ c->length = 28;
+}
+
+static void avc_tuner_dsd_dvb_t(struct dvb_frontend_parameters *params,
+ struct avc_command_frame *c)
+{
+ struct dvb_ofdm_parameters *ofdm = ¶ms->u.ofdm;
+
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */
+
+ /* multiplex_valid_flags, high byte */
+ c->operand[5] =
+ 0 << 7 /* reserved */
+ | 1 << 6 /* CenterFrequency */
+ | (ofdm->bandwidth != BANDWIDTH_AUTO ? 1 << 5 : 0)
+ | (ofdm->constellation != QAM_AUTO ? 1 << 4 : 0)
+ | (ofdm->hierarchy_information != HIERARCHY_AUTO ? 1 << 3 : 0)
+ | (ofdm->code_rate_HP != FEC_AUTO ? 1 << 2 : 0)
+ | (ofdm->code_rate_LP != FEC_AUTO ? 1 << 1 : 0)
+ | (ofdm->guard_interval != GUARD_INTERVAL_AUTO ? 1 << 0 : 0);
+
+ /* multiplex_valid_flags, low byte */
+ c->operand[6] =
+ 0 << 7 /* NetworkID */
+ | (ofdm->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0)
+ | 0 << 5 /* OtherFrequencyFlag */
+ | 0 << 0 /* reserved */ ;
+
+ c->operand[7] = 0x0;
+ c->operand[8] = (params->frequency / 10) >> 24;
+ c->operand[9] = ((params->frequency / 10) >> 16) & 0xff;
+ c->operand[10] = ((params->frequency / 10) >> 8) & 0xff;
+ c->operand[11] = (params->frequency / 10) & 0xff;
+
+ switch (ofdm->bandwidth) {
+ case BANDWIDTH_7_MHZ: c->operand[12] = 0x20; break;
+ case BANDWIDTH_8_MHZ:
+ case BANDWIDTH_6_MHZ: /* not defined by AVC spec */
+ case BANDWIDTH_AUTO:
+ default: c->operand[12] = 0x00;
+ }
+
+ switch (ofdm->constellation) {
+ case QAM_16: c->operand[13] = 1 << 6; break;
+ case QAM_64: c->operand[13] = 2 << 6; break;
+ case QPSK:
+ default: c->operand[13] = 0x00;
+ }
+
+ switch (ofdm->hierarchy_information) {
+ case HIERARCHY_1: c->operand[13] |= 1 << 3; break;
+ case HIERARCHY_2: c->operand[13] |= 2 << 3; break;
+ case HIERARCHY_4: c->operand[13] |= 3 << 3; break;
+ case HIERARCHY_AUTO:
+ case HIERARCHY_NONE:
+ default: break;
+ }
+
+ switch (ofdm->code_rate_HP) {
+ case FEC_2_3: c->operand[13] |= 1; break;
+ case FEC_3_4: c->operand[13] |= 2; break;
+ case FEC_5_6: c->operand[13] |= 3; break;
+ case FEC_7_8: c->operand[13] |= 4; break;
+ case FEC_1_2:
+ default: break;
+ }
+
+ switch (ofdm->code_rate_LP) {
+ case FEC_2_3: c->operand[14] = 1 << 5; break;
+ case FEC_3_4: c->operand[14] = 2 << 5; break;
+ case FEC_5_6: c->operand[14] = 3 << 5; break;
+ case FEC_7_8: c->operand[14] = 4 << 5; break;
+ case FEC_1_2:
+ default: c->operand[14] = 0x00; break;
+ }
+
+ switch (ofdm->guard_interval) {
+ case GUARD_INTERVAL_1_16: c->operand[14] |= 1 << 3; break;
+ case GUARD_INTERVAL_1_8: c->operand[14] |= 2 << 3; break;
+ case GUARD_INTERVAL_1_4: c->operand[14] |= 3 << 3; break;
+ case GUARD_INTERVAL_1_32:
+ case GUARD_INTERVAL_AUTO:
+ default: break;
+ }
+
+ switch (ofdm->transmission_mode) {
+ case TRANSMISSION_MODE_8K: c->operand[14] |= 1 << 1; break;
+ case TRANSMISSION_MODE_2K:
+ case TRANSMISSION_MODE_AUTO:
+ default: break;
+ }
+
+ c->operand[15] = 0x00; /* network_ID[0] */
+ c->operand[16] = 0x00; /* network_ID[1] */
+ /* Nr_of_dsd_sel_specs = 0 -> no PIDs are transmitted */
+ c->operand[17] = 0x00;
+
+ c->length = 24;
+}
+
+int avc_tuner_dsd(struct firedtv *fdtv,
+ struct dvb_frontend_parameters *params)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+
+ switch (fdtv->type) {
+ case FIREDTV_DVB_S:
+ case FIREDTV_DVB_S2: avc_tuner_tuneqpsk(fdtv, params, c); break;
+ case FIREDTV_DVB_C: avc_tuner_dsd_dvb_c(params, c); break;
+ case FIREDTV_DVB_T: avc_tuner_dsd_dvb_t(params, c); break;
+ default:
+ BUG();
+ }
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(500);
+#if 0
+ /* FIXME: */
+ /* u8 *status was an out-parameter of avc_tuner_dsd, unused by caller */
+ if (status)
+ *status = r->operand[2];
+#endif
+ return 0;
+}
+
+int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ int pos, k;
+
+ if (pidc > 16 && pidc != 0xff)
+ return -EINVAL;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_DSD;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0x20; /* system id = DVB */
+ c->operand[3] = 0x00; /* antenna number */
+ c->operand[4] = 0x00; /* system_specific_multiplex selection_length */
+ c->operand[5] = pidc; /* Nr_of_dsd_sel_specs */
+
+ pos = 6;
+ if (pidc != 0xff)
+ for (k = 0; k < pidc; k++) {
+ c->operand[pos++] = 0x13; /* flowfunction relay */
+ c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
+ c->operand[pos++] = (pid[k] >> 8) & 0x1f;
+ c->operand[pos++] = pid[k] & 0xff;
+ c->operand[pos++] = 0x00; /* tableID */
+ c->operand[pos++] = 0x00; /* filter_length */
+ }
+
+ c->length = ALIGN(3 + pos, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(50);
+ return 0;
+}
+
+int avc_tuner_get_ts(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+ int sl;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_DSIT;
+
+ sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11;
+
+ c->operand[0] = 0; /* source plug */
+ c->operand[1] = 0xd2; /* subfunction replace */
+ c->operand[2] = 0xff; /* status */
+ c->operand[3] = 0x20; /* system id = DVB */
+ c->operand[4] = 0x00; /* antenna number */
+ c->operand[5] = 0x0; /* system_specific_search_flags */
+ c->operand[6] = sl; /* system_specific_multiplex selection_length */
+ c->operand[7] = 0x00; /* valid_flags [0] */
+ c->operand[8] = 0x00; /* valid_flags [1] */
+ c->operand[7 + sl] = 0x00; /* nr_of_dsit_sel_specs (always 0) */
+
+ c->length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ msleep(250);
+ return 0;
+}
+
+int avc_identify_subunit(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
+
+ c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER;
+ c->operand[1] = 0xff;
+ c->operand[2] = 0x00;
+ c->operand[3] = 0x00; /* length highbyte */
+ c->operand[4] = 0x08; /* length lowbyte */
+ c->operand[5] = 0x00; /* offset highbyte */
+ c->operand[6] = 0x0d; /* offset lowbyte */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if ((r->response != AVC_RESPONSE_STABLE &&
+ r->response != AVC_RESPONSE_ACCEPTED) ||
+ (r->operand[3] << 8) + r->operand[4] != 8) {
+ dev_err(fdtv->device, "cannot read subunit identifier\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+#define SIZEOF_ANTENNA_INPUT_INFO 22
+
+int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int length;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
+
+ c->operand[0] = DESCRIPTOR_TUNER_STATUS;
+ c->operand[1] = 0xff; /* read_result_status */
+ c->operand[2] = 0x00; /* reserved */
+ c->operand[3] = 0; /* SIZEOF_ANTENNA_INPUT_INFO >> 8; */
+ c->operand[4] = 0; /* SIZEOF_ANTENNA_INPUT_INFO & 0xff; */
+ c->operand[5] = 0x00;
+ c->operand[6] = 0x00;
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_STABLE &&
+ r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device, "cannot read tuner status\n");
+ return -EINVAL;
+ }
+
+ length = r->operand[9];
+ if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
+ dev_err(fdtv->device, "got invalid tuner status\n");
+ return -EINVAL;
+ }
+
+ stat->active_system = r->operand[10];
+ stat->searching = r->operand[11] >> 7 & 1;
+ stat->moving = r->operand[11] >> 6 & 1;
+ stat->no_rf = r->operand[11] >> 5 & 1;
+ stat->input = r->operand[12] >> 7 & 1;
+ stat->selected_antenna = r->operand[12] & 0x7f;
+ stat->ber = r->operand[13] << 24 |
+ r->operand[14] << 16 |
+ r->operand[15] << 8 |
+ r->operand[16];
+ stat->signal_strength = r->operand[17];
+ stat->raster_frequency = r->operand[18] >> 6 & 2;
+ stat->rf_frequency = (r->operand[18] & 0x3f) << 16 |
+ r->operand[19] << 8 |
+ r->operand[20];
+ stat->man_dep_info_length = r->operand[21];
+ stat->front_end_error = r->operand[22] >> 4 & 1;
+ stat->antenna_error = r->operand[22] >> 3 & 1;
+ stat->front_end_power_status = r->operand[22] >> 1 & 1;
+ stat->power_supply = r->operand[22] & 1;
+ stat->carrier_noise_ratio = r->operand[23] << 8 |
+ r->operand[24];
+ stat->power_supply_voltage = r->operand[27];
+ stat->antenna_voltage = r->operand[28];
+ stat->firewire_bus_voltage = r->operand[29];
+ stat->ca_mmi = r->operand[30] & 1;
+ stat->ca_pmt_reply = r->operand[31] >> 7 & 1;
+ stat->ca_date_time_request = r->operand[31] >> 6 & 1;
+ stat->ca_application_info = r->operand[31] >> 5 & 1;
+ stat->ca_module_present_status = r->operand[31] >> 4 & 1;
+ stat->ca_dvb_flag = r->operand[31] >> 3 & 1;
+ stat->ca_error_flag = r->operand[31] >> 2 & 1;
+ stat->ca_initialization_status = r->operand[31] >> 1 & 1;
+
+ return 0;
+}
+
+int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+ char conttone, char nrdiseq,
+ struct dvb_diseqc_master_cmd *diseqcmd)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int i, j, k;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
+
+ c->operand[4] = voltage;
+ c->operand[5] = nrdiseq;
+
+ i = 6;
+
+ for (j = 0; j < nrdiseq; j++) {
+ c->operand[i++] = diseqcmd[j].msg_len;
+
+ for (k = 0; k < diseqcmd[j].msg_len; k++)
+ c->operand[i++] = diseqcmd[j].msg[k];
+ }
+
+ c->operand[i++] = burst;
+ c->operand[i++] = conttone;
+
+ c->length = ALIGN(3 + i, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device, "LNB control failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int avc_register_remote_control(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_NOTIFY;
+ c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
+
+ c->length = 8;
+
+ return avc_write(fdtv, c, NULL);
+}
+
+void avc_remote_ctrl_work(struct work_struct *work)
+{
+ struct firedtv *fdtv =
+ container_of(work, struct firedtv, remote_ctrl_work);
+
+ /* Should it be rescheduled in failure cases? */
+ avc_register_remote_control(fdtv);
+}
+
+#if 0 /* FIXME: unused */
+int avc_tuner_host2ca(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+#endif
+
+static int get_ca_object_pos(struct avc_response_frame *r)
+{
+ int length = 1;
+
+ /* Check length of length field */
+ if (r->operand[7] & 0x80)
+ length = (r->operand[7] & 0x7f) + 1;
+ return length + 7;
+}
+
+static int get_ca_object_length(struct avc_response_frame *r)
+{
+#if 0 /* FIXME: unused */
+ int size = 0;
+ int i;
+
+ if (r->operand[7] & 0x80)
+ for (i = 0; i < (r->operand[7] & 0x7f); i++) {
+ size <<= 8;
+ size += r->operand[8 + i];
+ }
+#endif
+ return r->operand[7];
+}
+
+int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int pos;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ pos = get_ca_object_pos(r);
+ app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
+ app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff;
+ app_info[2] = (EN50221_TAG_APP_INFO >> 0) & 0xff;
+ app_info[3] = 6 + r->operand[pos + 4];
+ app_info[4] = 0x01;
+ memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
+ *len = app_info[3] + 4;
+
+ return 0;
+}
+
+int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int pos;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ pos = get_ca_object_pos(r);
+ app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
+ app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff;
+ app_info[2] = (EN50221_TAG_CA_INFO >> 0) & 0xff;
+ app_info[3] = 2;
+ app_info[4] = r->operand[pos + 0];
+ app_info[5] = r->operand[pos + 1];
+ *len = app_info[3] + 4;
+
+ return 0;
+}
+
+int avc_ca_reset(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 1; /* length */
+ c->operand[8] = 0; /* force hardware reset */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+ int list_management;
+ int program_info_length;
+ int pmt_cmd_id;
+ int read_pos;
+ int write_pos;
+ int es_info_length;
+ int crc32_csum;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_CONTROL;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) {
+ dev_info(fdtv->device, "forcing list_management to ONLY\n");
+ msg[0] = EN50221_LIST_MANAGEMENT_ONLY;
+ }
+ /* We take the cmd_id from the programme level only! */
+ list_management = msg[0];
+ program_info_length = ((msg[4] & 0x0f) << 8) + msg[5];
+ if (program_info_length > 0)
+ program_info_length--; /* Remove pmt_cmd_id */
+ pmt_cmd_id = msg[6];
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */
+ c->operand[8] = list_management;
+ c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */
+
+ /* TS program map table */
+
+ c->operand[10] = 0x02; /* Table id=2 */
+ c->operand[11] = 0x80; /* Section syntax + length */
+ /* c->operand[12] = XXXprogram_info_length + 12; */
+ c->operand[13] = msg[1]; /* Program number */
+ c->operand[14] = msg[2];
+ c->operand[15] = 0x01; /* Version number=0 + current/next=1 */
+ c->operand[16] = 0x00; /* Section number=0 */
+ c->operand[17] = 0x00; /* Last section number=0 */
+ c->operand[18] = 0x1f; /* PCR_PID=1FFF */
+ c->operand[19] = 0xff;
+ c->operand[20] = (program_info_length >> 8); /* Program info length */
+ c->operand[21] = (program_info_length & 0xff);
+
+ /* CA descriptors at programme level */
+ read_pos = 6;
+ write_pos = 22;
+ if (program_info_length > 0) {
+ pmt_cmd_id = msg[read_pos++];
+ if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+ dev_err(fdtv->device,
+ "invalid pmt_cmd_id %d\n", pmt_cmd_id);
+
+ memcpy(&c->operand[write_pos], &msg[read_pos],
+ program_info_length);
+ read_pos += program_info_length;
+ write_pos += program_info_length;
+ }
+ while (read_pos < length) {
+ c->operand[write_pos++] = msg[read_pos++];
+ c->operand[write_pos++] = msg[read_pos++];
+ c->operand[write_pos++] = msg[read_pos++];
+ es_info_length =
+ ((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1];
+ read_pos += 2;
+ if (es_info_length > 0)
+ es_info_length--; /* Remove pmt_cmd_id */
+ c->operand[write_pos++] = es_info_length >> 8;
+ c->operand[write_pos++] = es_info_length & 0xff;
+ if (es_info_length > 0) {
+ pmt_cmd_id = msg[read_pos++];
+ if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
+ dev_err(fdtv->device, "invalid pmt_cmd_id %d "
+ "at stream level\n", pmt_cmd_id);
+
+ memcpy(&c->operand[write_pos], &msg[read_pos],
+ es_info_length);
+ read_pos += es_info_length;
+ write_pos += es_info_length;
+ }
+ }
+
+ /* CRC */
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+ c->operand[write_pos++] = 0x00;
+
+ c->operand[7] = write_pos - 8;
+ c->operand[12] = write_pos - 13;
+
+ crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
+ c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
+ c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
+ c->operand[write_pos - 2] = (crc32_csum >> 8) & 0xff;
+ c->operand[write_pos - 1] = (crc32_csum >> 0) & 0xff;
+
+ c->length = ALIGN(3 + write_pos, 4);
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ if (r->response != AVC_RESPONSE_ACCEPTED) {
+ dev_err(fdtv->device,
+ "CA PMT failed with response 0x%x\n", r->response);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ *interval = r->operand[get_ca_object_pos(r)];
+
+ return 0;
+}
+
+int avc_ca_enter_menu(struct firedtv *fdtv)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer; /* FIXME: unused */
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
+{
+ char buffer[sizeof(struct avc_command_frame)];
+ struct avc_command_frame *c = (void *)buffer;
+ struct avc_response_frame *r = (void *)buffer;
+
+ memset(c, 0, sizeof(*c));
+
+ c->ctype = AVC_CTYPE_STATUS;
+ c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
+ c->opcode = AVC_OPCODE_VENDOR;
+
+ c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
+ c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
+ c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
+ c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
+ c->operand[4] = 0; /* slot */
+ c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
+ c->operand[6] = 0; /* more/last */
+ c->operand[7] = 0; /* length */
+
+ c->length = 12;
+
+ if (avc_write(fdtv, c, r) < 0)
+ return -EIO;
+
+ /* FIXME: check response code and validate response data */
+
+ *len = get_ca_object_length(r);
+ memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
+
+ return 0;
+}
+
+#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
+
+static int cmp_read(struct firedtv *fdtv, void *buf, u64 addr, size_t len)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = fdtv->backend->read(fdtv, addr, buf, len);
+ if (ret < 0)
+ dev_err(fdtv->device, "CMP: read I/O error\n");
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+static int cmp_lock(struct firedtv *fdtv, void *data, u64 addr, __be32 arg)
+{
+ int ret;
+
+ if (mutex_lock_interruptible(&fdtv->avc_mutex))
+ return -EINTR;
+
+ ret = fdtv->backend->lock(fdtv, addr, data, arg);
+ if (ret < 0)
+ dev_err(fdtv->device, "CMP: lock I/O error\n");
+
+ mutex_unlock(&fdtv->avc_mutex);
+ return ret;
+}
+
+static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift)
+{
+ return (be32_to_cpu(opcr) >> shift) & mask;
+}
+
+static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift)
+{
+ *opcr &= ~cpu_to_be32(mask << shift);
+ *opcr |= cpu_to_be32((value & mask) << shift);
+}
+
+#define get_opcr_online(v) get_opcr((v), 0x1, 31)
+#define get_opcr_p2p_connections(v) get_opcr((v), 0x3f, 24)
+#define get_opcr_channel(v) get_opcr((v), 0x3f, 16)
+
+#define set_opcr_p2p_connections(p, v) set_opcr((p), (v), 0x3f, 24)
+#define set_opcr_channel(p, v) set_opcr((p), (v), 0x3f, 16)
+#define set_opcr_data_rate(p, v) set_opcr((p), (v), 0x3, 14)
+#define set_opcr_overhead_id(p, v) set_opcr((p), (v), 0xf, 10)
+
+int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
+{
+ __be32 old_opcr, opcr;
+ u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+ int attempts = 0;
+ int ret;
+
+ ret = cmp_read(fdtv, &opcr, opcr_address, 4);
+ if (ret < 0)
+ return ret;
+
+repeat:
+ if (!get_opcr_online(opcr)) {
+ dev_err(fdtv->device, "CMP: output offline\n");
+ return -EBUSY;
+ }
+
+ old_opcr = opcr;
+
+ if (get_opcr_p2p_connections(opcr)) {
+ if (get_opcr_channel(opcr) != channel) {
+ dev_err(fdtv->device, "CMP: cannot change channel\n");
+ return -EBUSY;
+ }
+ dev_info(fdtv->device, "CMP: overlaying connection\n");
+
+ /* We don't allocate isochronous resources. */
+ } else {
+ set_opcr_channel(&opcr, channel);
+ set_opcr_data_rate(&opcr, 2); /* S400 */
+
+ /* FIXME: this is for the worst case - optimize */
+ set_opcr_overhead_id(&opcr, 0);
+
+ /*
+ * FIXME: allocate isochronous channel and bandwidth at IRM
+ * fdtv->backend->alloc_resources(fdtv, channels_mask, bw);
+ */
+ }
+
+ set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) + 1);
+
+ ret = cmp_lock(fdtv, &opcr, opcr_address, old_opcr);
+ if (ret < 0)
+ return ret;
+
+ if (old_opcr != opcr) {
+ /*
+ * FIXME: if old_opcr.P2P_Connections > 0,
+ * deallocate isochronous channel and bandwidth at IRM
+ * if (...)
+ * fdtv->backend->dealloc_resources(fdtv, channel, bw);
+ */
+
+ if (++attempts < 6) /* arbitrary limit */
+ goto repeat;
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
+{
+ __be32 old_opcr, opcr;
+ u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
+ int attempts = 0;
+
+ if (cmp_read(fdtv, &opcr, opcr_address, 4) < 0)
+ return;
+
+repeat:
+ if (!get_opcr_online(opcr) || !get_opcr_p2p_connections(opcr) ||
+ get_opcr_channel(opcr) != channel) {
+ dev_err(fdtv->device, "CMP: no connection to break\n");
+ return;
+ }
+
+ old_opcr = opcr;
+ set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) - 1);
+
+ if (cmp_lock(fdtv, &opcr, opcr_address, old_opcr) < 0)
+ return;
+
+ if (old_opcr != opcr) {
+ /*
+ * FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
+ * owner, deallocate isochronous channel and bandwidth at IRM
+ * if (...)
+ * fdtv->backend->dealloc_resources(fdtv, channel, bw);
+ */
+
+ if (++attempts < 6) /* arbitrary limit */
+ goto repeat;
+ }
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/dvb/ca.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+
+#include <dvbdev.h>
+
+#include "firedtv.h"
+
+#define EN50221_TAG_APP_INFO_ENQUIRY 0x9f8020
+#define EN50221_TAG_CA_INFO_ENQUIRY 0x9f8030
+#define EN50221_TAG_CA_PMT 0x9f8032
+#define EN50221_TAG_ENTER_MENU 0x9f8022
+
+static int fdtv_ca_ready(struct firedtv_tuner_status *stat)
+{
+ return stat->ca_initialization_status == 1 &&
+ stat->ca_error_flag == 0 &&
+ stat->ca_dvb_flag == 1 &&
+ stat->ca_module_present_status == 1;
+}
+
+static int fdtv_get_ca_flags(struct firedtv_tuner_status *stat)
+{
+ int flags = 0;
+
+ if (stat->ca_module_present_status == 1)
+ flags |= CA_CI_MODULE_PRESENT;
+ if (stat->ca_initialization_status == 1 &&
+ stat->ca_error_flag == 0 &&
+ stat->ca_dvb_flag == 1)
+ flags |= CA_CI_MODULE_READY;
+ return flags;
+}
+
+static int fdtv_ca_reset(struct firedtv *fdtv)
+{
+ return avc_ca_reset(fdtv) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_caps(void *arg)
+{
+ struct ca_caps *cap = arg;
+
+ cap->slot_num = 1;
+ cap->slot_type = CA_CI;
+ cap->descr_num = 1;
+ cap->descr_type = CA_ECD;
+ return 0;
+}
+
+static int fdtv_ca_get_slot_info(struct firedtv *fdtv, void *arg)
+{
+ struct firedtv_tuner_status stat;
+ struct ca_slot_info *slot = arg;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EFAULT;
+
+ if (slot->num != 0)
+ return -EFAULT;
+
+ slot->type = CA_CI;
+ slot->flags = fdtv_get_ca_flags(&stat);
+ return 0;
+}
+
+static int fdtv_ca_app_info(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_app_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_info(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_info(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_mmi(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *reply = arg;
+
+ return avc_ca_get_mmi(fdtv, reply->msg, &reply->length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_get_msg(struct firedtv *fdtv, void *arg)
+{
+ struct firedtv_tuner_status stat;
+ int err;
+
+ switch (fdtv->ca_last_command) {
+ case EN50221_TAG_APP_INFO_ENQUIRY:
+ err = fdtv_ca_app_info(fdtv, arg);
+ break;
+ case EN50221_TAG_CA_INFO_ENQUIRY:
+ err = fdtv_ca_info(fdtv, arg);
+ break;
+ default:
+ if (avc_tuner_status(fdtv, &stat))
+ err = -EFAULT;
+ else if (stat.ca_mmi == 1)
+ err = fdtv_ca_get_mmi(fdtv, arg);
+ else {
+ dev_info(fdtv->device, "unhandled CA message 0x%08x\n",
+ fdtv->ca_last_command);
+ err = -EFAULT;
+ }
+ }
+ fdtv->ca_last_command = 0;
+ return err;
+}
+
+static int fdtv_ca_pmt(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *msg = arg;
+ int data_pos;
+ int data_length;
+ int i;
+
+ data_pos = 4;
+ if (msg->msg[3] & 0x80) {
+ data_length = 0;
+ for (i = 0; i < (msg->msg[3] & 0x7f); i++)
+ data_length = (data_length << 8) + msg->msg[data_pos++];
+ } else {
+ data_length = msg->msg[3];
+ }
+
+ return avc_ca_pmt(fdtv, &msg->msg[data_pos], data_length) ? -EFAULT : 0;
+}
+
+static int fdtv_ca_send_msg(struct firedtv *fdtv, void *arg)
+{
+ struct ca_msg *msg = arg;
+ int err;
+
+ /* Do we need a semaphore for this? */
+ fdtv->ca_last_command =
+ (msg->msg[0] << 16) + (msg->msg[1] << 8) + msg->msg[2];
+ switch (fdtv->ca_last_command) {
+ case EN50221_TAG_CA_PMT:
+ err = fdtv_ca_pmt(fdtv, arg);
+ break;
+ case EN50221_TAG_APP_INFO_ENQUIRY:
+ /* handled in ca_get_msg */
+ err = 0;
+ break;
+ case EN50221_TAG_CA_INFO_ENQUIRY:
+ /* handled in ca_get_msg */
+ err = 0;
+ break;
+ case EN50221_TAG_ENTER_MENU:
+ err = avc_ca_enter_menu(fdtv);
+ break;
+ default:
+ dev_err(fdtv->device, "unhandled CA message 0x%08x\n",
+ fdtv->ca_last_command);
+ err = -EFAULT;
+ }
+ return err;
+}
+
+static int fdtv_ca_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, void *arg)
+{
+ struct dvb_device *dvbdev = file->private_data;
+ struct firedtv *fdtv = dvbdev->priv;
+ struct firedtv_tuner_status stat;
+ int err;
+
+ switch (cmd) {
+ case CA_RESET:
+ err = fdtv_ca_reset(fdtv);
+ break;
+ case CA_GET_CAP:
+ err = fdtv_ca_get_caps(arg);
+ break;
+ case CA_GET_SLOT_INFO:
+ err = fdtv_ca_get_slot_info(fdtv, arg);
+ break;
+ case CA_GET_MSG:
+ err = fdtv_ca_get_msg(fdtv, arg);
+ break;
+ case CA_SEND_MSG:
+ err = fdtv_ca_send_msg(fdtv, arg);
+ break;
+ default:
+ dev_info(fdtv->device, "unhandled CA ioctl %u\n", cmd);
+ err = -EOPNOTSUPP;
+ }
+
+ /* FIXME Is this necessary? */
+ avc_tuner_status(fdtv, &stat);
+
+ return err;
+}
+
+static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait)
+{
+ return POLLIN;
+}
+
+static struct file_operations fdtv_ca_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = dvb_generic_ioctl,
+ .open = dvb_generic_open,
+ .release = dvb_generic_release,
+ .poll = fdtv_ca_io_poll,
+};
+
+static struct dvb_device fdtv_ca = {
+ .users = 1,
+ .readers = 1,
+ .writers = 1,
+ .fops = &fdtv_ca_fops,
+ .kernel_ioctl = fdtv_ca_ioctl,
+};
+
+int fdtv_ca_register(struct firedtv *fdtv)
+{
+ struct firedtv_tuner_status stat;
+ int err;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ if (!fdtv_ca_ready(&stat))
+ return -EFAULT;
+
+ err = dvb_register_device(&fdtv->adapter, &fdtv->cadev,
+ &fdtv_ca, fdtv, DVB_DEVICE_CA);
+
+ if (stat.ca_application_info == 0)
+ dev_err(fdtv->device, "CaApplicationInfo is not set\n");
+ if (stat.ca_date_time_request == 1)
+ avc_ca_get_time_date(fdtv, &fdtv->ca_time_interval);
+
+ return err;
+}
+
+void fdtv_ca_release(struct firedtv *fdtv)
+{
+ if (fdtv->cadev)
+ dvb_unregister_device(fdtv->cadev);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvbdev.h>
+#include <dvb_frontend.h>
+
+#include "firedtv.h"
+
+static int alloc_channel(struct firedtv *fdtv)
+{
+ int i;
+
+ for (i = 0; i < 16; i++)
+ if (!__test_and_set_bit(i, &fdtv->channel_active))
+ break;
+ return i;
+}
+
+static void collect_channels(struct firedtv *fdtv, int *pidc, u16 pid[])
+{
+ int i, n;
+
+ for (i = 0, n = 0; i < 16; i++)
+ if (test_bit(i, &fdtv->channel_active))
+ pid[n++] = fdtv->channel_pid[i];
+ *pidc = n;
+}
+
+static inline void dealloc_channel(struct firedtv *fdtv, int i)
+{
+ __clear_bit(i, &fdtv->channel_active);
+}
+
+int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct firedtv *fdtv = dvbdmxfeed->demux->priv;
+ int pidc, c, ret;
+ u16 pids[16];
+
+ switch (dvbdmxfeed->type) {
+ case DMX_TYPE_TS:
+ case DMX_TYPE_SEC:
+ break;
+ default:
+ dev_err(fdtv->device, "can't start dmx feed: invalid type %u\n",
+ dvbdmxfeed->type);
+ return -EINVAL;
+ }
+
+ if (mutex_lock_interruptible(&fdtv->demux_mutex))
+ return -EINTR;
+
+ if (dvbdmxfeed->type == DMX_TYPE_TS) {
+ switch (dvbdmxfeed->pes_type) {
+ case DMX_TS_PES_VIDEO:
+ case DMX_TS_PES_AUDIO:
+ case DMX_TS_PES_TELETEXT:
+ case DMX_TS_PES_PCR:
+ case DMX_TS_PES_OTHER:
+ c = alloc_channel(fdtv);
+ break;
+ default:
+ dev_err(fdtv->device,
+ "can't start dmx feed: invalid pes type %u\n",
+ dvbdmxfeed->pes_type);
+ ret = -EINVAL;
+ goto out;
+ }
+ } else {
+ c = alloc_channel(fdtv);
+ }
+
+ if (c > 15) {
+ dev_err(fdtv->device, "can't start dmx feed: busy\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ dvbdmxfeed->priv = (typeof(dvbdmxfeed->priv))(unsigned long)c;
+ fdtv->channel_pid[c] = dvbdmxfeed->pid;
+ collect_channels(fdtv, &pidc, pids);
+
+ if (dvbdmxfeed->pid == 8192) {
+ ret = avc_tuner_get_ts(fdtv);
+ if (ret) {
+ dealloc_channel(fdtv, c);
+ dev_err(fdtv->device, "can't get TS\n");
+ goto out;
+ }
+ } else {
+ ret = avc_tuner_set_pids(fdtv, pidc, pids);
+ if (ret) {
+ dealloc_channel(fdtv, c);
+ dev_err(fdtv->device, "can't set PIDs\n");
+ goto out;
+ }
+ }
+out:
+ mutex_unlock(&fdtv->demux_mutex);
+
+ return ret;
+}
+
+int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct firedtv *fdtv = demux->priv;
+ int pidc, c, ret;
+ u16 pids[16];
+
+ if (dvbdmxfeed->type == DMX_TYPE_TS &&
+ !((dvbdmxfeed->ts_type & TS_PACKET) &&
+ (demux->dmx.frontend->source != DMX_MEMORY_FE))) {
+
+ if (dvbdmxfeed->ts_type & TS_DECODER) {
+ if (dvbdmxfeed->pes_type >= DMX_TS_PES_OTHER ||
+ !demux->pesfilter[dvbdmxfeed->pes_type])
+ return -EINVAL;
+
+ demux->pids[dvbdmxfeed->pes_type] |= 0x8000;
+ demux->pesfilter[dvbdmxfeed->pes_type] = NULL;
+ }
+
+ if (!(dvbdmxfeed->ts_type & TS_DECODER &&
+ dvbdmxfeed->pes_type < DMX_TS_PES_OTHER))
+ return 0;
+ }
+
+ if (mutex_lock_interruptible(&fdtv->demux_mutex))
+ return -EINTR;
+
+ c = (unsigned long)dvbdmxfeed->priv;
+ dealloc_channel(fdtv, c);
+ collect_channels(fdtv, &pidc, pids);
+
+ ret = avc_tuner_set_pids(fdtv, pidc, pids);
+
+ mutex_unlock(&fdtv->demux_mutex);
+
+ return ret;
+}
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int fdtv_dvb_register(struct firedtv *fdtv)
+{
+ int err;
+
+ err = dvb_register_adapter(&fdtv->adapter, fdtv_model_names[fdtv->type],
+ THIS_MODULE, fdtv->device, adapter_nr);
+ if (err < 0)
+ goto fail_log;
+
+ /*DMX_TS_FILTERING | DMX_SECTION_FILTERING*/
+ fdtv->demux.dmx.capabilities = 0;
+
+ fdtv->demux.priv = fdtv;
+ fdtv->demux.filternum = 16;
+ fdtv->demux.feednum = 16;
+ fdtv->demux.start_feed = fdtv_start_feed;
+ fdtv->demux.stop_feed = fdtv_stop_feed;
+ fdtv->demux.write_to_decoder = NULL;
+
+ err = dvb_dmx_init(&fdtv->demux);
+ if (err)
+ goto fail_unreg_adapter;
+
+ fdtv->dmxdev.filternum = 16;
+ fdtv->dmxdev.demux = &fdtv->demux.dmx;
+ fdtv->dmxdev.capabilities = 0;
+
+ err = dvb_dmxdev_init(&fdtv->dmxdev, &fdtv->adapter);
+ if (err)
+ goto fail_dmx_release;
+
+ fdtv->frontend.source = DMX_FRONTEND_0;
+
+ err = fdtv->demux.dmx.add_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+ if (err)
+ goto fail_dmxdev_release;
+
+ err = fdtv->demux.dmx.connect_frontend(&fdtv->demux.dmx,
+ &fdtv->frontend);
+ if (err)
+ goto fail_rem_frontend;
+
+ dvb_net_init(&fdtv->adapter, &fdtv->dvbnet, &fdtv->demux.dmx);
+
+ fdtv_frontend_init(fdtv);
+ err = dvb_register_frontend(&fdtv->adapter, &fdtv->fe);
+ if (err)
+ goto fail_net_release;
+
+ err = fdtv_ca_register(fdtv);
+ if (err)
+ dev_info(fdtv->device,
+ "Conditional Access Module not enabled\n");
+ return 0;
+
+fail_net_release:
+ dvb_net_release(&fdtv->dvbnet);
+ fdtv->demux.dmx.close(&fdtv->demux.dmx);
+fail_rem_frontend:
+ fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+fail_dmxdev_release:
+ dvb_dmxdev_release(&fdtv->dmxdev);
+fail_dmx_release:
+ dvb_dmx_release(&fdtv->demux);
+fail_unreg_adapter:
+ dvb_unregister_adapter(&fdtv->adapter);
+fail_log:
+ dev_err(fdtv->device, "DVB initialization failed\n");
+ return err;
+}
+
+void fdtv_dvb_unregister(struct firedtv *fdtv)
+{
+ fdtv_ca_release(fdtv);
+ dvb_unregister_frontend(&fdtv->fe);
+ dvb_net_release(&fdtv->dvbnet);
+ fdtv->demux.dmx.close(&fdtv->demux.dmx);
+ fdtv->demux.dmx.remove_frontend(&fdtv->demux.dmx, &fdtv->frontend);
+ dvb_dmxdev_release(&fdtv->dmxdev);
+ dvb_dmx_release(&fdtv->demux);
+ dvb_unregister_adapter(&fdtv->adapter);
+}
+
+const char *fdtv_model_names[] = {
+ [FIREDTV_UNKNOWN] = "unknown type",
+ [FIREDTV_DVB_S] = "FireDTV S/CI",
+ [FIREDTV_DVB_C] = "FireDTV C/CI",
+ [FIREDTV_DVB_T] = "FireDTV T/CI",
+ [FIREDTV_DVB_S2] = "FireDTV S2 ",
+};
+
+struct firedtv *fdtv_alloc(struct device *dev,
+ const struct firedtv_backend *backend,
+ const char *name, size_t name_len)
+{
+ struct firedtv *fdtv;
+ int i;
+
+ fdtv = kzalloc(sizeof(*fdtv), GFP_KERNEL);
+ if (!fdtv)
+ return NULL;
+
+ dev->driver_data = fdtv;
+ fdtv->device = dev;
+ fdtv->isochannel = -1;
+ fdtv->voltage = 0xff;
+ fdtv->tone = 0xff;
+ fdtv->backend = backend;
+
+ mutex_init(&fdtv->avc_mutex);
+ init_waitqueue_head(&fdtv->avc_wait);
+ fdtv->avc_reply_received = true;
+ mutex_init(&fdtv->demux_mutex);
+ INIT_WORK(&fdtv->remote_ctrl_work, avc_remote_ctrl_work);
+
+ for (i = ARRAY_SIZE(fdtv_model_names); --i; )
+ if (strlen(fdtv_model_names[i]) <= name_len &&
+ strncmp(name, fdtv_model_names[i], name_len) == 0)
+ break;
+ fdtv->type = i;
+
+ return fdtv;
+}
+
+#define MATCH_FLAGS (IEEE1394_MATCH_VENDOR_ID | IEEE1394_MATCH_MODEL_ID | \
+ IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION)
+
+#define DIGITAL_EVERYWHERE_OUI 0x001287
+#define AVC_UNIT_SPEC_ID_ENTRY 0x00a02d
+#define AVC_SW_VERSION_ENTRY 0x010001
+
+static struct ieee1394_device_id fdtv_id_table[] = {
+ {
+ /* FloppyDTV S/CI and FloppyDTV S2 */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000024,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FloppyDTV T/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000025,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FloppyDTV C/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000026,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV S/CI and FloppyDTV S2 */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000034,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV T/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000035,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {
+ /* FireDTV C/CI */
+ .match_flags = MATCH_FLAGS,
+ .vendor_id = DIGITAL_EVERYWHERE_OUI,
+ .model_id = 0x000036,
+ .specifier_id = AVC_UNIT_SPEC_ID_ENTRY,
+ .version = AVC_SW_VERSION_ENTRY,
+ }, {}
+};
+MODULE_DEVICE_TABLE(ieee1394, fdtv_id_table);
+
+static int __init fdtv_init(void)
+{
+ return fdtv_1394_init(fdtv_id_table);
+}
+
+static void __exit fdtv_exit(void)
+{
+ fdtv_1394_exit();
+}
+
+module_init(fdtv_init);
+module_exit(fdtv_exit);
+
+MODULE_AUTHOR("Andreas Monitzer <andy@monitzer.com>");
+MODULE_AUTHOR("Ben Backx <ben@bbackx.com>");
+MODULE_DESCRIPTION("FireDTV DVB Driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("FireDTV DVB");
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <dvb_frontend.h>
+
+#include "firedtv.h"
+
+static int fdtv_dvb_init(struct dvb_frontend *fe)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ int err;
+
+ /* FIXME - allocate free channel at IRM */
+ fdtv->isochannel = fdtv->adapter.num;
+
+ err = cmp_establish_pp_connection(fdtv, fdtv->subunit,
+ fdtv->isochannel);
+ if (err) {
+ dev_err(fdtv->device,
+ "could not establish point to point connection\n");
+ return err;
+ }
+
+ return fdtv->backend->start_iso(fdtv);
+}
+
+static int fdtv_sleep(struct dvb_frontend *fe)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->backend->stop_iso(fdtv);
+ cmp_break_pp_connection(fdtv, fdtv->subunit, fdtv->isochannel);
+ fdtv->isochannel = -1;
+ return 0;
+}
+
+#define LNBCONTROL_DONTCARE 0xff
+
+static int fdtv_diseqc_send_master_cmd(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *cmd)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ return avc_lnb_control(fdtv, LNBCONTROL_DONTCARE, LNBCONTROL_DONTCARE,
+ LNBCONTROL_DONTCARE, 1, cmd);
+}
+
+static int fdtv_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t minicmd)
+{
+ return 0;
+}
+
+static int fdtv_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->tone = tone;
+ return 0;
+}
+
+static int fdtv_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ fdtv->voltage = voltage;
+ return 0;
+}
+
+static int fdtv_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ if (stat.no_rf)
+ *status = 0;
+ else
+ *status = FE_HAS_SIGNAL | FE_HAS_VITERBI | FE_HAS_SYNC |
+ FE_HAS_CARRIER | FE_HAS_LOCK;
+ return 0;
+}
+
+static int fdtv_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ *ber = stat.ber;
+ return 0;
+}
+
+static int fdtv_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ *strength = stat.signal_strength << 8;
+ return 0;
+}
+
+static int fdtv_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+ struct firedtv_tuner_status stat;
+
+ if (avc_tuner_status(fdtv, &stat))
+ return -EINVAL;
+
+ /* C/N[dB] = -10 * log10(snr / 65535) */
+ *snr = stat.carrier_noise_ratio * 257;
+ return 0;
+}
+
+static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ return -EOPNOTSUPP;
+}
+
+#define ACCEPTED 0x9
+
+static int fdtv_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct firedtv *fdtv = fe->sec_priv;
+
+ /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */
+ if (avc_tuner_dsd(fdtv, params) != ACCEPTED)
+ return -EINVAL;
+ else
+ return 0; /* not sure of this... */
+}
+
+static int fdtv_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ return -EOPNOTSUPP;
+}
+
+void fdtv_frontend_init(struct firedtv *fdtv)
+{
+ struct dvb_frontend_ops *ops = &fdtv->fe.ops;
+ struct dvb_frontend_info *fi = &ops->info;
+
+ ops->init = fdtv_dvb_init;
+ ops->sleep = fdtv_sleep;
+
+ ops->set_frontend = fdtv_set_frontend;
+ ops->get_frontend = fdtv_get_frontend;
+
+ ops->read_status = fdtv_read_status;
+ ops->read_ber = fdtv_read_ber;
+ ops->read_signal_strength = fdtv_read_signal_strength;
+ ops->read_snr = fdtv_read_snr;
+ ops->read_ucblocks = fdtv_read_uncorrected_blocks;
+
+ ops->diseqc_send_master_cmd = fdtv_diseqc_send_master_cmd;
+ ops->diseqc_send_burst = fdtv_diseqc_send_burst;
+ ops->set_tone = fdtv_set_tone;
+ ops->set_voltage = fdtv_set_voltage;
+
+ switch (fdtv->type) {
+ case FIREDTV_DVB_S:
+ case FIREDTV_DVB_S2:
+ fi->type = FE_QPSK;
+
+ fi->frequency_min = 950000;
+ fi->frequency_max = 2150000;
+ fi->frequency_stepsize = 125;
+ fi->symbol_rate_min = 1000000;
+ fi->symbol_rate_max = 40000000;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 |
+ FE_CAN_FEC_7_8 |
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK;
+ break;
+
+ case FIREDTV_DVB_C:
+ fi->type = FE_QAM;
+
+ fi->frequency_min = 47000000;
+ fi->frequency_max = 866000000;
+ fi->frequency_stepsize = 62500;
+ fi->symbol_rate_min = 870000;
+ fi->symbol_rate_max = 6900000;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_QAM_16 |
+ FE_CAN_QAM_32 |
+ FE_CAN_QAM_64 |
+ FE_CAN_QAM_128 |
+ FE_CAN_QAM_256 |
+ FE_CAN_QAM_AUTO;
+ break;
+
+ case FIREDTV_DVB_T:
+ fi->type = FE_OFDM;
+
+ fi->frequency_min = 49000000;
+ fi->frequency_max = 861000000;
+ fi->frequency_stepsize = 62500;
+
+ fi->caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_2_3 |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO;
+ break;
+
+ default:
+ dev_err(fdtv->device, "no frontend for model type %d\n",
+ fdtv->type);
+ }
+ strcpy(fi->name, fdtv_model_names[fdtv->type]);
+
+ fdtv->fe.dvb = &fdtv->adapter;
+ fdtv->fe.sec_priv = fdtv;
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "firedtv.h"
+
+/* fixed table with older keycodes, geared towards MythTV */
+const static u16 oldtable[] = {
+
+ /* code from device: 0x4501...0x451f */
+
+ KEY_ESC,
+ KEY_F9,
+ KEY_1,
+ KEY_2,
+ KEY_3,
+ KEY_4,
+ KEY_5,
+ KEY_6,
+ KEY_7,
+ KEY_8,
+ KEY_9,
+ KEY_I,
+ KEY_0,
+ KEY_ENTER,
+ KEY_RED,
+ KEY_UP,
+ KEY_GREEN,
+ KEY_F10,
+ KEY_SPACE,
+ KEY_F11,
+ KEY_YELLOW,
+ KEY_DOWN,
+ KEY_BLUE,
+ KEY_Z,
+ KEY_P,
+ KEY_PAGEDOWN,
+ KEY_LEFT,
+ KEY_W,
+ KEY_RIGHT,
+ KEY_P,
+ KEY_M,
+
+ /* code from device: 0x4540...0x4542 */
+
+ KEY_R,
+ KEY_V,
+ KEY_C,
+};
+
+/* user-modifiable table for a remote as sold in 2008 */
+const static u16 keytable[] = {
+
+ /* code from device: 0x0300...0x031f */
+
+ [0x00] = KEY_POWER,
+ [0x01] = KEY_SLEEP,
+ [0x02] = KEY_STOP,
+ [0x03] = KEY_OK,
+ [0x04] = KEY_RIGHT,
+ [0x05] = KEY_1,
+ [0x06] = KEY_2,
+ [0x07] = KEY_3,
+ [0x08] = KEY_LEFT,
+ [0x09] = KEY_4,
+ [0x0a] = KEY_5,
+ [0x0b] = KEY_6,
+ [0x0c] = KEY_UP,
+ [0x0d] = KEY_7,
+ [0x0e] = KEY_8,
+ [0x0f] = KEY_9,
+ [0x10] = KEY_DOWN,
+ [0x11] = KEY_TITLE, /* "OSD" - fixme */
+ [0x12] = KEY_0,
+ [0x13] = KEY_F20, /* "16:9" - fixme */
+ [0x14] = KEY_SCREEN, /* "FULL" - fixme */
+ [0x15] = KEY_MUTE,
+ [0x16] = KEY_SUBTITLE,
+ [0x17] = KEY_RECORD,
+ [0x18] = KEY_TEXT,
+ [0x19] = KEY_AUDIO,
+ [0x1a] = KEY_RED,
+ [0x1b] = KEY_PREVIOUS,
+ [0x1c] = KEY_REWIND,
+ [0x1d] = KEY_PLAYPAUSE,
+ [0x1e] = KEY_NEXT,
+ [0x1f] = KEY_VOLUMEUP,
+
+ /* code from device: 0x0340...0x0354 */
+
+ [0x20] = KEY_CHANNELUP,
+ [0x21] = KEY_F21, /* "4:3" - fixme */
+ [0x22] = KEY_TV,
+ [0x23] = KEY_DVD,
+ [0x24] = KEY_VCR,
+ [0x25] = KEY_AUX,
+ [0x26] = KEY_GREEN,
+ [0x27] = KEY_YELLOW,
+ [0x28] = KEY_BLUE,
+ [0x29] = KEY_CHANNEL, /* "CH.LIST" */
+ [0x2a] = KEY_VENDOR, /* "CI" - fixme */
+ [0x2b] = KEY_VOLUMEDOWN,
+ [0x2c] = KEY_CHANNELDOWN,
+ [0x2d] = KEY_LAST,
+ [0x2e] = KEY_INFO,
+ [0x2f] = KEY_FORWARD,
+ [0x30] = KEY_LIST,
+ [0x31] = KEY_FAVORITES,
+ [0x32] = KEY_MENU,
+ [0x33] = KEY_EPG,
+ [0x34] = KEY_EXIT,
+};
+
+int fdtv_register_rc(struct firedtv *fdtv, struct device *dev)
+{
+ struct input_dev *idev;
+ int i, err;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ fdtv->remote_ctrl_dev = idev;
+ idev->name = "FireDTV remote control";
+ idev->dev.parent = dev;
+ idev->evbit[0] = BIT_MASK(EV_KEY);
+ idev->keycode = kmemdup(keytable, sizeof(keytable), GFP_KERNEL);
+ if (!idev->keycode) {
+ err = -ENOMEM;
+ goto fail;
+ }
+ idev->keycodesize = sizeof(keytable[0]);
+ idev->keycodemax = ARRAY_SIZE(keytable);
+
+ for (i = 0; i < ARRAY_SIZE(keytable); i++)
+ set_bit(keytable[i], idev->keybit);
+
+ err = input_register_device(idev);
+ if (err)
+ goto fail_free_keymap;
+
+ return 0;
+
+fail_free_keymap:
+ kfree(idev->keycode);
+fail:
+ input_free_device(idev);
+ return err;
+}
+
+void fdtv_unregister_rc(struct firedtv *fdtv)
+{
+ kfree(fdtv->remote_ctrl_dev->keycode);
+ input_unregister_device(fdtv->remote_ctrl_dev);
+}
+
+void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code)
+{
+ u16 *keycode = fdtv->remote_ctrl_dev->keycode;
+
+ if (code >= 0x0300 && code <= 0x031f)
+ code = keycode[code - 0x0300];
+ else if (code >= 0x0340 && code <= 0x0354)
+ code = keycode[code - 0x0320];
+ else if (code >= 0x4501 && code <= 0x451f)
+ code = oldtable[code - 0x4501];
+ else if (code >= 0x4540 && code <= 0x4542)
+ code = oldtable[code - 0x4521];
+ else {
+ printk(KERN_DEBUG "firedtv: invalid key code 0x%04x "
+ "from remote control\n", code);
+ return;
+ }
+
+ input_report_key(fdtv->remote_ctrl_dev, code, 1);
+ input_report_key(fdtv->remote_ctrl_dev, code, 0);
+}
--- /dev/null
+/*
+ * FireDTV driver (formerly known as FireSAT)
+ *
+ * Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
+ * Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _FIREDTV_H
+#define _FIREDTV_H
+
+#include <linux/dvb/dmx.h>
+#include <linux/dvb/frontend.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/spinlock_types.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <demux.h>
+#include <dmxdev.h>
+#include <dvb_demux.h>
+#include <dvb_frontend.h>
+#include <dvb_net.h>
+#include <dvbdev.h>
+
+struct firedtv_tuner_status {
+ unsigned active_system:8;
+ unsigned searching:1;
+ unsigned moving:1;
+ unsigned no_rf:1;
+ unsigned input:1;
+ unsigned selected_antenna:7;
+ unsigned ber:32;
+ unsigned signal_strength:8;
+ unsigned raster_frequency:2;
+ unsigned rf_frequency:22;
+ unsigned man_dep_info_length:8;
+ unsigned front_end_error:1;
+ unsigned antenna_error:1;
+ unsigned front_end_power_status:1;
+ unsigned power_supply:1;
+ unsigned carrier_noise_ratio:16;
+ unsigned power_supply_voltage:8;
+ unsigned antenna_voltage:8;
+ unsigned firewire_bus_voltage:8;
+ unsigned ca_mmi:1;
+ unsigned ca_pmt_reply:1;
+ unsigned ca_date_time_request:1;
+ unsigned ca_application_info:1;
+ unsigned ca_module_present_status:1;
+ unsigned ca_dvb_flag:1;
+ unsigned ca_error_flag:1;
+ unsigned ca_initialization_status:1;
+};
+
+enum model_type {
+ FIREDTV_UNKNOWN = 0,
+ FIREDTV_DVB_S = 1,
+ FIREDTV_DVB_C = 2,
+ FIREDTV_DVB_T = 3,
+ FIREDTV_DVB_S2 = 4,
+};
+
+struct device;
+struct input_dev;
+struct firedtv;
+
+struct firedtv_backend {
+ int (*lock)(struct firedtv *fdtv, u64 addr, void *data, __be32 arg);
+ int (*read)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+ int (*write)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+ int (*start_iso)(struct firedtv *fdtv);
+ void (*stop_iso)(struct firedtv *fdtv);
+};
+
+struct firedtv {
+ struct device *device;
+ struct list_head list;
+
+ struct dvb_adapter adapter;
+ struct dmxdev dmxdev;
+ struct dvb_demux demux;
+ struct dmx_frontend frontend;
+ struct dvb_net dvbnet;
+ struct dvb_frontend fe;
+
+ struct dvb_device *cadev;
+ int ca_last_command;
+ int ca_time_interval;
+
+ struct mutex avc_mutex;
+ wait_queue_head_t avc_wait;
+ bool avc_reply_received;
+ struct work_struct remote_ctrl_work;
+ struct input_dev *remote_ctrl_dev;
+
+ enum model_type type;
+ char subunit;
+ char isochannel;
+ fe_sec_voltage_t voltage;
+ fe_sec_tone_mode_t tone;
+
+ const struct firedtv_backend *backend;
+ void *backend_data;
+
+ struct mutex demux_mutex;
+ unsigned long channel_active;
+ u16 channel_pid[16];
+
+ size_t response_length;
+ u8 response[512];
+};
+
+/* firedtv-1394.c */
+#ifdef CONFIG_DVB_FIREDTV_IEEE1394
+int fdtv_1394_init(struct ieee1394_device_id id_table[]);
+void fdtv_1394_exit(void);
+#else
+static inline int fdtv_1394_init(struct ieee1394_device_id it[]) { return 0; }
+static inline void fdtv_1394_exit(void) {}
+#endif
+
+/* firedtv-avc.c */
+int avc_recv(struct firedtv *fdtv, void *data, size_t length);
+int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat);
+struct dvb_frontend_parameters;
+int avc_tuner_dsd(struct firedtv *fdtv, struct dvb_frontend_parameters *params);
+int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[]);
+int avc_tuner_get_ts(struct firedtv *fdtv);
+int avc_identify_subunit(struct firedtv *fdtv);
+struct dvb_diseqc_master_cmd;
+int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
+ char conttone, char nrdiseq,
+ struct dvb_diseqc_master_cmd *diseqcmd);
+void avc_remote_ctrl_work(struct work_struct *work);
+int avc_register_remote_control(struct firedtv *fdtv);
+int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+int avc_ca_reset(struct firedtv *fdtv);
+int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length);
+int avc_ca_get_time_date(struct firedtv *fdtv, int *interval);
+int avc_ca_enter_menu(struct firedtv *fdtv);
+int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len);
+int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel);
+void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel);
+
+/* firedtv-ci.c */
+int fdtv_ca_register(struct firedtv *fdtv);
+void fdtv_ca_release(struct firedtv *fdtv);
+
+/* firedtv-dvb.c */
+int fdtv_start_feed(struct dvb_demux_feed *dvbdmxfeed);
+int fdtv_stop_feed(struct dvb_demux_feed *dvbdmxfeed);
+int fdtv_dvb_register(struct firedtv *fdtv);
+void fdtv_dvb_unregister(struct firedtv *fdtv);
+struct firedtv *fdtv_alloc(struct device *dev,
+ const struct firedtv_backend *backend,
+ const char *name, size_t name_len);
+extern const char *fdtv_model_names[];
+
+/* firedtv-fe.c */
+void fdtv_frontend_init(struct firedtv *fdtv);
+
+/* firedtv-rc.c */
+#ifdef CONFIG_DVB_FIREDTV_INPUT
+int fdtv_register_rc(struct firedtv *fdtv, struct device *dev);
+void fdtv_unregister_rc(struct firedtv *fdtv);
+void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code);
+#else
+static inline int fdtv_register_rc(struct firedtv *fdtv,
+ struct device *dev) { return 0; }
+static inline void fdtv_unregister_rc(struct firedtv *fdtv) {}
+static inline void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) {}
+#endif
+
+#endif /* _FIREDTV_H */
pcm->info_flags = 0;
pcm->private_data = dev;
strcpy(pcm->name, "Empia 28xx Capture");
+
+ snd_card_set_dev(card, &dev->udev->dev);
strcpy(card->driver, "Empia Em28xx Audio");
strcpy(card->shortname, "Em28xx Audio");
strcpy(card->longname, "Empia Em28xx Audio");
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct pxa_camera_dev *pcdev = ici->priv;
- const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL;
- const struct soc_camera_format_xlate *xlate;
+ const struct soc_camera_data_format *cam_fmt = NULL;
+ const struct soc_camera_format_xlate *xlate = NULL;
struct soc_camera_sense sense = {
.master_clock = pcdev->mclk,
.pixel_clock_max = pcdev->ciclk / 4,
};
- int ret, buswidth;
+ int ret;
- xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
- if (!xlate) {
- dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
- return -EINVAL;
- }
+ if (pixfmt) {
+ xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
+ if (!xlate) {
+ dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
+ return -EINVAL;
+ }
- buswidth = xlate->buswidth;
- host_fmt = xlate->host_fmt;
- cam_fmt = xlate->cam_fmt;
+ cam_fmt = xlate->cam_fmt;
+ }
/* If PCLK is used to latch data from the sensor, check sense */
if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN)
}
if (pixfmt && !ret) {
- icd->buswidth = buswidth;
- icd->current_fmt = host_fmt;
+ icd->buswidth = xlate->buswidth;
+ icd->current_fmt = xlate->host_fmt;
}
return ret;
const struct soc_camera_format_xlate *xlate;
int ret;
+ if (!pixfmt)
+ return icd->ops->set_fmt(icd, pixfmt, rect);
+
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
- switch (pixfmt) {
- case 0: /* Only geometry change */
- ret = icd->ops->set_fmt(icd, pixfmt, rect);
- break;
- default:
- ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
- }
+ ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
- if (pixfmt && !ret) {
+ if (!ret) {
icd->buswidth = xlate->buswidth;
icd->current_fmt = xlate->host_fmt;
pcdev->camera_fmt = xlate->cam_fmt;
usb_to_input_id(udev, &input->id);
input->dev.parent = &dev->intf->dev;
- set_bit(EV_KEY, input->evbit);
- set_bit(BTN_0, input->keybit);
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(KEY_CAMERA, input->keybit);
if ((ret = input_register_device(input)) < 0)
goto error;
static void uvc_input_report_key(struct uvc_device *dev, unsigned int code,
int value)
{
- if (dev->input)
+ if (dev->input) {
input_report_key(dev->input, code, value);
+ input_sync(dev->input);
+ }
}
#else
return;
uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n",
data[1], data[3] ? "pressed" : "released", len);
- uvc_input_report_key(dev, BTN_0, data[3]);
+ uvc_input_report_key(dev, KEY_CAMERA, data[3]);
} else {
uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x "
"len %d.\n", data[1], data[2], data[3], len);
controllers (default=0)");
static int mpt_msi_enable_sas;
-module_param(mpt_msi_enable_sas, int, 1);
+module_param(mpt_msi_enable_sas, int, 0);
MODULE_PARM_DESC(mpt_msi_enable_sas, " Enable MSI Support for SAS \
- controllers (default=1)");
+ controllers (default=0)");
static int mpt_channel_mapping;
static struct pci_device_id ilo_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) },
+ { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) },
{ }
};
MODULE_DEVICE_TABLE(pci, ilo_devices);
class_destroy(ilo_class);
}
-MODULE_VERSION("0.06");
+MODULE_VERSION("1.0");
MODULE_ALIAS(ILO_NAME);
MODULE_DESCRIPTION(ILO_NAME);
MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>");
static const struct sdhci_pci_fixes sdhci_cafe = {
.quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_NO_BUSY_IRQ |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
};
if (host->cmd->data)
DBG("Cannot wait for busy signal when also "
"doing a data transfer");
- else
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
}
if (intmask & SDHCI_INT_RESPONSE)
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+/* Controller does not provide transfer-complete interrupt when not busy */
+#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
static void maprom_nop (struct mtd_info *);
static struct mtd_info *map_rom_probe(struct map_info *map);
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info);
static struct mtd_chip_driver maprom_chipdrv = {
.probe = map_rom_probe,
mtd->read = maprom_read;
mtd->write = maprom_write;
mtd->sync = maprom_nop;
+ mtd->erase = maprom_erase;
mtd->flags = MTD_CAP_ROM;
mtd->erasesize = map->size;
mtd->writesize = 1;
return -EIO;
}
+static int maprom_erase (struct mtd_info *mtd, struct erase_info *info)
+{
+ /* We do our best 8) */
+ return -EROFS;
+}
+
static int __init map_rom_init(void)
{
register_mtd_chip_driver(&maprom_chipdrv);
if (*(szlength) != '+') {
devlength = simple_strtoul(szlength, &buffer, 0);
devlength = handle_unit(devlength, buffer) - devstart;
+ if (devlength < devstart)
+ goto err_out;
+
+ devlength -= devstart;
} else {
devlength = simple_strtoul(szlength + 1, &buffer, 0);
devlength = handle_unit(devlength, buffer);
}
T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
devname, devstart, devlength);
- if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
- E("slram: Illegal start / length parameter.\n");
- return(-EINVAL);
- }
+ if (devlength % SLRAM_BLK_SZ != 0)
+ goto err_out;
if ((devstart = register_device(devname, devstart, devlength))){
unregister_devices();
return((int)devstart);
}
return(0);
+
+err_out:
+ E("slram: Illegal length parameter.\n");
+ return(-EINVAL);
}
#ifndef MODULE
DDR memories, intended for battery-operated systems.
config MTD_QINFO_PROBE
+ depends on MTD_LPDDR
tristate "Detect flash chips by QINFO probe"
help
Device Information for LPDDR chips is offered through the Overlay
config MTD_BFIN_ASYNC
tristate "Blackfin BF533-STAMP Flash Chip Support"
- depends on BFIN533_STAMP && MTD_CFI
+ depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
select MTD_PARTITIONS
default y
help
if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
+ kfree(state);
return -EBUSY;
}
gpio_direction_output(state->enet_flash_pin, 1);
pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
state->mtd = do_map_probe(memory->name, &state->map);
- if (!state->mtd)
+ if (!state->mtd) {
+ gpio_free(state->enet_flash_pin);
+ kfree(state);
return -ENXIO;
+ }
#ifdef CONFIG_MTD_PARTITIONS
ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0);
{ 0, }
};
+#if 0
MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl);
-#if 0
static struct pci_driver ck804xrom_driver = {
.name = MOD_NAME,
.id_table = ck804xrom_pci_tbl,
struct map_info map[MAX_RESOURCES];
#ifdef CONFIG_MTD_PARTITIONS
int nr_parts;
+ struct mtd_partition *parts;
#endif
};
physmap_data = dev->dev.platform_data;
-#ifdef CONFIG_MTD_CONCAT
- if (info->cmtd != info->mtd[0]) {
+#ifdef CONFIG_MTD_PARTITIONS
+ if (info->nr_parts) {
+ del_mtd_partitions(info->cmtd);
+ kfree(info->parts);
+ } else if (physmap_data->nr_parts)
+ del_mtd_partitions(info->cmtd);
+ else
del_mtd_device(info->cmtd);
+#else
+ del_mtd_device(info->cmtd);
+#endif
+
+#ifdef CONFIG_MTD_CONCAT
+ if (info->cmtd != info->mtd[0])
mtd_concat_destroy(info->cmtd);
- }
#endif
for (i = 0; i < MAX_RESOURCES; i++) {
- if (info->mtd[i] != NULL) {
-#ifdef CONFIG_MTD_PARTITIONS
- if (info->nr_parts || physmap_data->nr_parts)
- del_mtd_partitions(info->mtd[i]);
- else
- del_mtd_device(info->mtd[i]);
-#else
- del_mtd_device(info->mtd[i]);
-#endif
+ if (info->mtd[i] != NULL)
map_destroy(info->mtd[i]);
- }
}
return 0;
}
int err = 0;
int i;
int devices_found = 0;
-#ifdef CONFIG_MTD_PARTITIONS
- struct mtd_partition *parts;
-#endif
physmap_data = dev->dev.platform_data;
if (physmap_data == NULL)
goto err_out;
#ifdef CONFIG_MTD_PARTITIONS
- err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0);
+ err = parse_mtd_partitions(info->cmtd, part_probe_types,
+ &info->parts, 0);
if (err > 0) {
- add_mtd_partitions(info->cmtd, parts, err);
- kfree(parts);
+ add_mtd_partitions(info->cmtd, info->parts, err);
+ info->nr_parts = err;
return 0;
}
static struct platform_driver orion_nand_driver = {
.probe = orion_nand_probe,
- .remove = orion_nand_remove,
+ .remove = __devexit_p(orion_nand_remove),
.driver = {
.name = "orion_nand",
.owner = THIS_MODULE,
To compile this driver as a module, choose M here. The module
will be called atl1e.
+config ATL1C
+ tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ select MII
+ help
+ This driver supports the Atheros L1C gigabit ethernet adapter.
+
+ To compile this driver as a module, choose M here. The module
+ will be called atl1c.
+
config JME
tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
depends on PCI
obj-$(CONFIG_ATL1) += atlx/
obj-$(CONFIG_ATL2) += atlx/
obj-$(CONFIG_ATL1E) += atl1e/
+obj-$(CONFIG_ATL1C) += atl1c/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_TEHUTI) += tehuti.o
obj-$(CONFIG_ENIC) += enic/
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
-obj-$(CONFIG_ARM_ETHERH) += etherh.o ../8390.o
+obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
.ndo_open = etherh_open,
.ndo_stop = etherh_close,
.ndo_set_config = etherh_set_config,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
--- /dev/null
+obj-$(CONFIG_ATL1C) += atl1c.o
+atl1c-objs := atl1c_main.o atl1c_hw.o atl1c_ethtool.o
--- /dev/null
+/*
+ * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ATL1C_H_
+#define _ATL1C_H_
+
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/mii.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/tcp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+
+#include "atl1c_hw.h"
+
+/* Wake Up Filter Control */
+#define AT_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define AT_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define AT_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define AT_WUFC_MC 0x00000008 /* Multicast Wakeup Enable */
+#define AT_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+#define AT_VLAN_TO_TAG(_vlan, _tag) \
+ _tag = ((((_vlan) >> 8) & 0xFF) |\
+ (((_vlan) & 0xFF) << 8))
+
+#define AT_TAG_TO_VLAN(_tag, _vlan) \
+ _vlan = ((((_tag) >> 8) & 0xFF) |\
+ (((_tag) & 0xFF) << 8))
+
+#define SPEED_0 0xffff
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#define AT_RX_BUF_SIZE (ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)
+#define MAX_JUMBO_FRAME_SIZE (9*1024)
+#define MAX_TX_OFFLOAD_THRESH (9*1024)
+
+#define AT_MAX_RECEIVE_QUEUE 4
+#define AT_DEF_RECEIVE_QUEUE 1
+#define AT_MAX_TRANSMIT_QUEUE 2
+
+#define AT_DMA_HI_ADDR_MASK 0xffffffff00000000ULL
+#define AT_DMA_LO_ADDR_MASK 0x00000000ffffffffULL
+
+#define AT_TX_WATCHDOG (5 * HZ)
+#define AT_MAX_INT_WORK 5
+#define AT_TWSI_EEPROM_TIMEOUT 100
+#define AT_HW_MAX_IDLE_DELAY 10
+#define AT_SUSPEND_LINK_TIMEOUT 28
+
+#define AT_ASPM_L0S_TIMER 6
+#define AT_ASPM_L1_TIMER 12
+
+#define ATL1C_PCIE_L0S_L1_DISABLE 0x01
+#define ATL1C_PCIE_PHY_RESET 0x02
+
+#define ATL1C_ASPM_L0s_ENABLE 0x0001
+#define ATL1C_ASPM_L1_ENABLE 0x0002
+
+#define AT_REGS_LEN (75 * sizeof(u32))
+#define AT_EEPROM_LEN 512
+
+#define ATL1C_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
+#define ATL1C_RFD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_rx_free_desc)
+#define ATL1C_TPD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_tpd_desc)
+#define ATL1C_RRD_DESC(R, i) ATL1C_GET_DESC(R, i, struct atl1c_recv_ret_status)
+
+/* tpd word 1 bit 0:7 General Checksum task offload */
+#define TPD_L4HDR_OFFSET_MASK 0x00FF
+#define TPD_L4HDR_OFFSET_SHIFT 0
+
+/* tpd word 1 bit 0:7 Large Send task offload (IPv4/IPV6) */
+#define TPD_TCPHDR_OFFSET_MASK 0x00FF
+#define TPD_TCPHDR_OFFSET_SHIFT 0
+
+/* tpd word 1 bit 0:7 Custom Checksum task offload */
+#define TPD_PLOADOFFSET_MASK 0x00FF
+#define TPD_PLOADOFFSET_SHIFT 0
+
+/* tpd word 1 bit 8:17 */
+#define TPD_CCSUM_EN_MASK 0x0001
+#define TPD_CCSUM_EN_SHIFT 8
+#define TPD_IP_CSUM_MASK 0x0001
+#define TPD_IP_CSUM_SHIFT 9
+#define TPD_TCP_CSUM_MASK 0x0001
+#define TPD_TCP_CSUM_SHIFT 10
+#define TPD_UDP_CSUM_MASK 0x0001
+#define TPD_UDP_CSUM_SHIFT 11
+#define TPD_LSO_EN_MASK 0x0001 /* TCP Large Send Offload */
+#define TPD_LSO_EN_SHIFT 12
+#define TPD_LSO_VER_MASK 0x0001
+#define TPD_LSO_VER_SHIFT 13 /* 0 : ipv4; 1 : ipv4/ipv6 */
+#define TPD_CON_VTAG_MASK 0x0001
+#define TPD_CON_VTAG_SHIFT 14
+#define TPD_INS_VTAG_MASK 0x0001
+#define TPD_INS_VTAG_SHIFT 15
+#define TPD_IPV4_PACKET_MASK 0x0001 /* valid when LSO VER is 1 */
+#define TPD_IPV4_PACKET_SHIFT 16
+#define TPD_ETH_TYPE_MASK 0x0001
+#define TPD_ETH_TYPE_SHIFT 17 /* 0 : 802.3 frame; 1 : Ethernet */
+
+/* tpd word 18:25 Custom Checksum task offload */
+#define TPD_CCSUM_OFFSET_MASK 0x00FF
+#define TPD_CCSUM_OFFSET_SHIFT 18
+#define TPD_CCSUM_EPAD_MASK 0x0001
+#define TPD_CCSUM_EPAD_SHIFT 30
+
+/* tpd word 18:30 Large Send task offload (IPv4/IPV6) */
+#define TPD_MSS_MASK 0x1FFF
+#define TPD_MSS_SHIFT 18
+
+#define TPD_EOP_MASK 0x0001
+#define TPD_EOP_SHIFT 31
+
+struct atl1c_tpd_desc {
+ __le16 buffer_len; /* include 4-byte CRC */
+ __le16 vlan_tag;
+ __le32 word1;
+ __le64 buffer_addr;
+};
+
+struct atl1c_tpd_ext_desc {
+ u32 reservd_0;
+ __le32 word1;
+ __le32 pkt_len;
+ u32 reservd_1;
+};
+/* rrs word 0 bit 0:31 */
+#define RRS_RX_CSUM_MASK 0xFFFF
+#define RRS_RX_CSUM_SHIFT 0
+#define RRS_RX_RFD_CNT_MASK 0x000F
+#define RRS_RX_RFD_CNT_SHIFT 16
+#define RRS_RX_RFD_INDEX_MASK 0x0FFF
+#define RRS_RX_RFD_INDEX_SHIFT 20
+
+/* rrs flag bit 0:16 */
+#define RRS_HEAD_LEN_MASK 0x00FF
+#define RRS_HEAD_LEN_SHIFT 0
+#define RRS_HDS_TYPE_MASK 0x0003
+#define RRS_HDS_TYPE_SHIFT 8
+#define RRS_CPU_NUM_MASK 0x0003
+#define RRS_CPU_NUM_SHIFT 10
+#define RRS_HASH_FLG_MASK 0x000F
+#define RRS_HASH_FLG_SHIFT 12
+
+#define RRS_HDS_TYPE_HEAD 1
+#define RRS_HDS_TYPE_DATA 2
+
+#define RRS_IS_NO_HDS_TYPE(flag) \
+ (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+
+#define RRS_IS_HDS_HEAD(flag) \
+ (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ RRS_HDS_TYPE_HEAD)
+
+#define RRS_IS_HDS_DATA(flag) \
+ (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+ RRS_HDS_TYPE_DATA)
+
+/* rrs word 3 bit 0:31 */
+#define RRS_PKT_SIZE_MASK 0x3FFF
+#define RRS_PKT_SIZE_SHIFT 0
+#define RRS_ERR_L4_CSUM_MASK 0x0001
+#define RRS_ERR_L4_CSUM_SHIFT 14
+#define RRS_ERR_IP_CSUM_MASK 0x0001
+#define RRS_ERR_IP_CSUM_SHIFT 15
+#define RRS_VLAN_INS_MASK 0x0001
+#define RRS_VLAN_INS_SHIFT 16
+#define RRS_PROT_ID_MASK 0x0007
+#define RRS_PROT_ID_SHIFT 17
+#define RRS_RX_ERR_SUM_MASK 0x0001
+#define RRS_RX_ERR_SUM_SHIFT 20
+#define RRS_RX_ERR_CRC_MASK 0x0001
+#define RRS_RX_ERR_CRC_SHIFT 21
+#define RRS_RX_ERR_FAE_MASK 0x0001
+#define RRS_RX_ERR_FAE_SHIFT 22
+#define RRS_RX_ERR_TRUNC_MASK 0x0001
+#define RRS_RX_ERR_TRUNC_SHIFT 23
+#define RRS_RX_ERR_RUNC_MASK 0x0001
+#define RRS_RX_ERR_RUNC_SHIFT 24
+#define RRS_RX_ERR_ICMP_MASK 0x0001
+#define RRS_RX_ERR_ICMP_SHIFT 25
+#define RRS_PACKET_BCAST_MASK 0x0001
+#define RRS_PACKET_BCAST_SHIFT 26
+#define RRS_PACKET_MCAST_MASK 0x0001
+#define RRS_PACKET_MCAST_SHIFT 27
+#define RRS_PACKET_TYPE_MASK 0x0001
+#define RRS_PACKET_TYPE_SHIFT 28
+#define RRS_FIFO_FULL_MASK 0x0001
+#define RRS_FIFO_FULL_SHIFT 29
+#define RRS_802_3_LEN_ERR_MASK 0x0001
+#define RRS_802_3_LEN_ERR_SHIFT 30
+#define RRS_RXD_UPDATED_MASK 0x0001
+#define RRS_RXD_UPDATED_SHIFT 31
+
+#define RRS_ERR_L4_CSUM 0x00004000
+#define RRS_ERR_IP_CSUM 0x00008000
+#define RRS_VLAN_INS 0x00010000
+#define RRS_RX_ERR_SUM 0x00100000
+#define RRS_RX_ERR_CRC 0x00200000
+#define RRS_802_3_LEN_ERR 0x40000000
+#define RRS_RXD_UPDATED 0x80000000
+
+#define RRS_PACKET_TYPE_802_3 1
+#define RRS_PACKET_TYPE_ETH 0
+#define RRS_PACKET_IS_ETH(word) \
+ (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+ RRS_PACKET_TYPE_ETH)
+#define RRS_RXD_IS_VALID(word) \
+ ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
+
+#define RRS_PACKET_PROT_IS_IPV4_ONLY(word) \
+ ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 1)
+#define RRS_PACKET_PROT_IS_IPV6_ONLY(word) \
+ ((((word) >> RRS_PROT_ID_SHIFT) & RRS_PROT_ID_MASK) == 6)
+
+struct atl1c_recv_ret_status {
+ __le32 word0;
+ __le32 rss_hash;
+ __le16 vlan_tag;
+ __le16 flag;
+ __le32 word3;
+};
+
+/* RFD desciptor */
+struct atl1c_rx_free_desc {
+ __le64 buffer_addr;
+};
+
+/* DMA Order Settings */
+enum atl1c_dma_order {
+ atl1c_dma_ord_in = 1,
+ atl1c_dma_ord_enh = 2,
+ atl1c_dma_ord_out = 4
+};
+
+enum atl1c_dma_rcb {
+ atl1c_rcb_64 = 0,
+ atl1c_rcb_128 = 1
+};
+
+enum atl1c_mac_speed {
+ atl1c_mac_speed_0 = 0,
+ atl1c_mac_speed_10_100 = 1,
+ atl1c_mac_speed_1000 = 2
+};
+
+enum atl1c_dma_req_block {
+ atl1c_dma_req_128 = 0,
+ atl1c_dma_req_256 = 1,
+ atl1c_dma_req_512 = 2,
+ atl1c_dma_req_1024 = 3,
+ atl1c_dma_req_2048 = 4,
+ atl1c_dma_req_4096 = 5
+};
+
+enum atl1c_rss_mode {
+ atl1c_rss_mode_disable = 0,
+ atl1c_rss_sig_que = 1,
+ atl1c_rss_mul_que_sig_int = 2,
+ atl1c_rss_mul_que_mul_int = 4,
+};
+
+enum atl1c_rss_type {
+ atl1c_rss_disable = 0,
+ atl1c_rss_ipv4 = 1,
+ atl1c_rss_ipv4_tcp = 2,
+ atl1c_rss_ipv6 = 4,
+ atl1c_rss_ipv6_tcp = 8
+};
+
+enum atl1c_nic_type {
+ athr_l1c = 0,
+ athr_l2c = 1,
+};
+
+enum atl1c_trans_queue {
+ atl1c_trans_normal = 0,
+ atl1c_trans_high = 1
+};
+
+struct atl1c_hw_stats {
+ /* rx */
+ unsigned long rx_ok; /* The number of good packet received. */
+ unsigned long rx_bcast; /* The number of good broadcast packet received. */
+ unsigned long rx_mcast; /* The number of good multicast packet received. */
+ unsigned long rx_pause; /* The number of Pause packet received. */
+ unsigned long rx_ctrl; /* The number of Control packet received other than Pause frame. */
+ unsigned long rx_fcs_err; /* The number of packets with bad FCS. */
+ unsigned long rx_len_err; /* The number of packets with mismatch of length field and actual size. */
+ unsigned long rx_byte_cnt; /* The number of bytes of good packet received. FCS is NOT included. */
+ unsigned long rx_runt; /* The number of packets received that are less than 64 byte long and with good FCS. */
+ unsigned long rx_frag; /* The number of packets received that are less than 64 byte long and with bad FCS. */
+ unsigned long rx_sz_64; /* The number of good and bad packets received that are 64 byte long. */
+ unsigned long rx_sz_65_127; /* The number of good and bad packets received that are between 65 and 127-byte long. */
+ unsigned long rx_sz_128_255; /* The number of good and bad packets received that are between 128 and 255-byte long. */
+ unsigned long rx_sz_256_511; /* The number of good and bad packets received that are between 256 and 511-byte long. */
+ unsigned long rx_sz_512_1023; /* The number of good and bad packets received that are between 512 and 1023-byte long. */
+ unsigned long rx_sz_1024_1518; /* The number of good and bad packets received that are between 1024 and 1518-byte long. */
+ unsigned long rx_sz_1519_max; /* The number of good and bad packets received that are between 1519-byte and MTU. */
+ unsigned long rx_sz_ov; /* The number of good and bad packets received that are more than MTU size truncated by Selene. */
+ unsigned long rx_rxf_ov; /* The number of frame dropped due to occurrence of RX FIFO overflow. */
+ unsigned long rx_rrd_ov; /* The number of frame dropped due to occurrence of RRD overflow. */
+ unsigned long rx_align_err; /* Alignment Error */
+ unsigned long rx_bcast_byte_cnt; /* The byte count of broadcast packet received, excluding FCS. */
+ unsigned long rx_mcast_byte_cnt; /* The byte count of multicast packet received, excluding FCS. */
+ unsigned long rx_err_addr; /* The number of packets dropped due to address filtering. */
+
+ /* tx */
+ unsigned long tx_ok; /* The number of good packet transmitted. */
+ unsigned long tx_bcast; /* The number of good broadcast packet transmitted. */
+ unsigned long tx_mcast; /* The number of good multicast packet transmitted. */
+ unsigned long tx_pause; /* The number of Pause packet transmitted. */
+ unsigned long tx_exc_defer; /* The number of packets transmitted with excessive deferral. */
+ unsigned long tx_ctrl; /* The number of packets transmitted is a control frame, excluding Pause frame. */
+ unsigned long tx_defer; /* The number of packets transmitted that is deferred. */
+ unsigned long tx_byte_cnt; /* The number of bytes of data transmitted. FCS is NOT included. */
+ unsigned long tx_sz_64; /* The number of good and bad packets transmitted that are 64 byte long. */
+ unsigned long tx_sz_65_127; /* The number of good and bad packets transmitted that are between 65 and 127-byte long. */
+ unsigned long tx_sz_128_255; /* The number of good and bad packets transmitted that are between 128 and 255-byte long. */
+ unsigned long tx_sz_256_511; /* The number of good and bad packets transmitted that are between 256 and 511-byte long. */
+ unsigned long tx_sz_512_1023; /* The number of good and bad packets transmitted that are between 512 and 1023-byte long. */
+ unsigned long tx_sz_1024_1518; /* The number of good and bad packets transmitted that are between 1024 and 1518-byte long. */
+ unsigned long tx_sz_1519_max; /* The number of good and bad packets transmitted that are between 1519-byte and MTU. */
+ unsigned long tx_1_col; /* The number of packets subsequently transmitted successfully with a single prior collision. */
+ unsigned long tx_2_col; /* The number of packets subsequently transmitted successfully with multiple prior collisions. */
+ unsigned long tx_late_col; /* The number of packets transmitted with late collisions. */
+ unsigned long tx_abort_col; /* The number of transmit packets aborted due to excessive collisions. */
+ unsigned long tx_underrun; /* The number of transmit packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
+ unsigned long tx_rd_eop; /* The number of times that read beyond the EOP into the next frame area when TRD was not written timely */
+ unsigned long tx_len_err; /* The number of transmit packets with length field does NOT match the actual frame size. */
+ unsigned long tx_trunc; /* The number of transmit packets truncated due to size exceeding MTU. */
+ unsigned long tx_bcast_byte; /* The byte count of broadcast packet transmitted, excluding FCS. */
+ unsigned long tx_mcast_byte; /* The byte count of multicast packet transmitted, excluding FCS. */
+};
+
+struct atl1c_hw {
+ u8 __iomem *hw_addr; /* inner register address */
+ struct atl1c_adapter *adapter;
+ enum atl1c_nic_type nic_type;
+ enum atl1c_dma_order dma_order;
+ enum atl1c_dma_rcb rcb_value;
+ enum atl1c_dma_req_block dmar_block;
+ enum atl1c_dma_req_block dmaw_block;
+
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+
+ u32 intr_mask;
+ u8 dmaw_dly_cnt;
+ u8 dmar_dly_cnt;
+
+ u8 preamble_len;
+ u16 max_frame_size;
+ u16 min_frame_size;
+
+ enum atl1c_mac_speed mac_speed;
+ bool mac_duplex;
+ bool hibernate;
+ u16 media_type;
+#define MEDIA_TYPE_AUTO_SENSOR 0
+#define MEDIA_TYPE_100M_FULL 1
+#define MEDIA_TYPE_100M_HALF 2
+#define MEDIA_TYPE_10M_FULL 3
+#define MEDIA_TYPE_10M_HALF 4
+
+ u16 autoneg_advertised;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ u16 tx_imt; /* TX Interrupt Moderator timer ( 2us resolution) */
+ u16 rx_imt; /* RX Interrupt Moderator timer ( 2us resolution) */
+ u16 ict; /* Interrupt Clear timer (2us resolution) */
+ u16 ctrl_flags;
+#define ATL1C_INTR_CLEAR_ON_READ 0x0001
+#define ATL1C_INTR_MODRT_ENABLE 0x0002
+#define ATL1C_CMB_ENABLE 0x0004
+#define ATL1C_SMB_ENABLE 0x0010
+#define ATL1C_TXQ_MODE_ENHANCE 0x0020
+#define ATL1C_RX_IPV6_CHKSUM 0x0040
+#define ATL1C_ASPM_L0S_SUPPORT 0x0080
+#define ATL1C_ASPM_L1_SUPPORT 0x0100
+#define ATL1C_ASPM_CTRL_MON 0x0200
+#define ATL1C_HIB_DISABLE 0x0400
+#define ATL1C_LINK_CAP_1000M 0x0800
+#define ATL1C_FPGA_VERSION 0x8000
+ u16 cmb_tpd;
+ u16 cmb_rrd;
+ u16 cmb_rx_timer; /* 2us resolution */
+ u16 cmb_tx_timer;
+ u32 smb_timer;
+
+ u16 rrd_thresh; /* Threshold of number of RRD produced to trigger
+ interrupt request */
+ u16 tpd_thresh;
+ u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. */
+ u8 rfd_burst;
+ enum atl1c_rss_type rss_type;
+ enum atl1c_rss_mode rss_mode;
+ u8 rss_hash_bits;
+ u32 base_cpu;
+ u32 indirect_tab;
+ u8 mac_addr[ETH_ALEN];
+ u8 perm_mac_addr[ETH_ALEN];
+
+ bool phy_configured;
+ bool re_autoneg;
+ bool emi_ca;
+};
+
+/*
+ * atl1c_ring_header represents a single, contiguous block of DMA space
+ * mapped for the three descriptor rings (tpd, rfd, rrd) and the two
+ * message blocks (cmb, smb) described below
+ */
+struct atl1c_ring_header {
+ void *desc; /* virtual address */
+ dma_addr_t dma; /* physical address*/
+ unsigned int size; /* length in bytes */
+};
+
+/*
+ * atl1c_buffer is wrapper around a pointer to a socket buffer
+ * so a DMA handle can be stored along with the skb
+ */
+struct atl1c_buffer {
+ struct sk_buff *skb; /* socket buffer */
+ u16 length; /* rx buffer length */
+ u16 state; /* state of buffer */
+#define ATL1_BUFFER_FREE 0
+#define ATL1_BUFFER_BUSY 1
+ dma_addr_t dma;
+};
+
+/* transimit packet descriptor (tpd) ring */
+struct atl1c_tpd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ u16 next_to_use; /* this is protectd by adapter->tx_lock */
+ atomic_t next_to_clean;
+ struct atl1c_buffer *buffer_info;
+};
+
+/* receive free descriptor (rfd) ring */
+struct atl1c_rfd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ u16 next_to_use;
+ u16 next_to_clean;
+ struct atl1c_buffer *buffer_info;
+};
+
+/* receive return desciptor (rrd) ring */
+struct atl1c_rrd_ring {
+ void *desc; /* descriptor ring virtual address */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ u16 next_to_use;
+ u16 next_to_clean;
+};
+
+struct atl1c_cmb {
+ void *cmb;
+ dma_addr_t dma;
+};
+
+struct atl1c_smb {
+ void *smb;
+ dma_addr_t dma;
+};
+
+/* board specific private data structure */
+struct atl1c_adapter {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct vlan_group *vlgrp;
+ struct napi_struct napi;
+ struct atl1c_hw hw;
+ struct atl1c_hw_stats hw_stats;
+ struct net_device_stats net_stats;
+ struct mii_if_info mii; /* MII interface info */
+ u16 rx_buffer_len;
+
+ unsigned long flags;
+#define __AT_TESTING 0x0001
+#define __AT_RESETTING 0x0002
+#define __AT_DOWN 0x0003
+ u32 msg_enable;
+
+ bool have_msi;
+ u32 wol;
+ u16 link_speed;
+ u16 link_duplex;
+
+ spinlock_t mdio_lock;
+ spinlock_t tx_lock;
+ atomic_t irq_sem;
+
+ struct work_struct reset_task;
+ struct work_struct link_chg_task;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_config_timer;
+
+ /* All Descriptor memory */
+ struct atl1c_ring_header ring_header;
+ struct atl1c_tpd_ring tpd_ring[AT_MAX_TRANSMIT_QUEUE];
+ struct atl1c_rfd_ring rfd_ring[AT_MAX_RECEIVE_QUEUE];
+ struct atl1c_rrd_ring rrd_ring[AT_MAX_RECEIVE_QUEUE];
+ struct atl1c_cmb cmb;
+ struct atl1c_smb smb;
+ int num_rx_queues;
+ u32 bd_number; /* board number;*/
+};
+
+#define AT_WRITE_REG(a, reg, value) ( \
+ writel((value), ((a)->hw_addr + reg)))
+
+#define AT_WRITE_FLUSH(a) (\
+ readl((a)->hw_addr))
+
+#define AT_READ_REG(a, reg, pdata) do { \
+ if (unlikely((a)->hibernate)) { \
+ readl((a)->hw_addr + reg); \
+ *(u32 *)pdata = readl((a)->hw_addr + reg); \
+ } else { \
+ *(u32 *)pdata = readl((a)->hw_addr + reg); \
+ } \
+ } while (0)
+
+#define AT_WRITE_REGB(a, reg, value) (\
+ writeb((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGB(a, reg) (\
+ readb((a)->hw_addr + reg))
+
+#define AT_WRITE_REGW(a, reg, value) (\
+ writew((value), ((a)->hw_addr + reg)))
+
+#define AT_READ_REGW(a, reg) (\
+ readw((a)->hw_addr + reg))
+
+#define AT_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), (((a)->hw_addr + reg) + ((offset) << 2))))
+
+#define AT_READ_REG_ARRAY(a, reg, offset) ( \
+ readl(((a)->hw_addr + reg) + ((offset) << 2)))
+
+extern char atl1c_driver_name[];
+extern char atl1c_driver_version[];
+
+extern int atl1c_up(struct atl1c_adapter *adapter);
+extern void atl1c_down(struct atl1c_adapter *adapter);
+extern void atl1c_reinit_locked(struct atl1c_adapter *adapter);
+extern s32 atl1c_reset_hw(struct atl1c_hw *hw);
+extern void atl1c_set_ethtool_ops(struct net_device *netdev);
+#endif /* _ATL1C_H_ */
--- /dev/null
+/*
+ * Copyright(c) 2009 - 2009 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+
+#include "atl1c.h"
+
+static int atl1c_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M)
+ ecmd->supported |= SUPPORTED_1000baseT_Full;
+
+ ecmd->advertising = ADVERTISED_TP;
+
+ ecmd->advertising |= hw->autoneg_advertised;
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = 0;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (adapter->link_speed != SPEED_0) {
+ ecmd->speed = adapter->link_speed;
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = AUTONEG_ENABLE;
+ return 0;
+}
+
+static int atl1c_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+ u16 autoneg_advertised;
+
+ while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ autoneg_advertised = ADVERTISED_Autoneg;
+ } else {
+ if (ecmd->speed == SPEED_1000) {
+ if (ecmd->duplex != DUPLEX_FULL) {
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev,
+ "1000M half is invalid\n");
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+ autoneg_advertised = ADVERTISED_1000baseT_Full;
+ } else if (ecmd->speed == SPEED_100) {
+ if (ecmd->duplex == DUPLEX_FULL)
+ autoneg_advertised = ADVERTISED_100baseT_Full;
+ else
+ autoneg_advertised = ADVERTISED_100baseT_Half;
+ } else {
+ if (ecmd->duplex == DUPLEX_FULL)
+ autoneg_advertised = ADVERTISED_10baseT_Full;
+ else
+ autoneg_advertised = ADVERTISED_10baseT_Half;
+ }
+ }
+
+ if (hw->autoneg_advertised != autoneg_advertised) {
+ hw->autoneg_advertised = autoneg_advertised;
+ if (atl1c_restart_autoneg(hw) != 0) {
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev,
+ "ethtool speed/duplex setting failed\n");
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+ }
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static u32 atl1c_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static u32 atl1c_get_msglevel(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void atl1c_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int atl1c_get_regs_len(struct net_device *netdev)
+{
+ return AT_REGS_LEN;
+}
+
+static void atl1c_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, AT_REGS_LEN);
+
+ regs->version = 0;
+ AT_READ_REG(hw, REG_VPD_CAP, p++);
+ AT_READ_REG(hw, REG_PM_CTRL, p++);
+ AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL, p++);
+ AT_READ_REG(hw, REG_TWSI_CTRL, p++);
+ AT_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL, p++);
+ AT_READ_REG(hw, REG_MASTER_CTRL, p++);
+ AT_READ_REG(hw, REG_MANUAL_TIMER_INIT, p++);
+ AT_READ_REG(hw, REG_IRQ_MODRT_TIMER_INIT, p++);
+ AT_READ_REG(hw, REG_GPHY_CTRL, p++);
+ AT_READ_REG(hw, REG_LINK_CTRL, p++);
+ AT_READ_REG(hw, REG_IDLE_STATUS, p++);
+ AT_READ_REG(hw, REG_MDIO_CTRL, p++);
+ AT_READ_REG(hw, REG_SERDES_LOCK, p++);
+ AT_READ_REG(hw, REG_MAC_CTRL, p++);
+ AT_READ_REG(hw, REG_MAC_IPG_IFG, p++);
+ AT_READ_REG(hw, REG_MAC_STA_ADDR, p++);
+ AT_READ_REG(hw, REG_MAC_STA_ADDR+4, p++);
+ AT_READ_REG(hw, REG_RX_HASH_TABLE, p++);
+ AT_READ_REG(hw, REG_RX_HASH_TABLE+4, p++);
+ AT_READ_REG(hw, REG_RXQ_CTRL, p++);
+ AT_READ_REG(hw, REG_TXQ_CTRL, p++);
+ AT_READ_REG(hw, REG_MTU, p++);
+ AT_READ_REG(hw, REG_WOL_CTRL, p++);
+
+ atl1c_read_phy_reg(hw, MII_BMCR, &phy_data);
+ regs_buff[73] = (u32) phy_data;
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ regs_buff[74] = (u32) phy_data;
+}
+
+static int atl1c_get_eeprom_len(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ if (atl1c_check_eeprom_exist(&adapter->hw))
+ return AT_EEPROM_LEN;
+ else
+ return 0;
+}
+
+static int atl1c_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 *eeprom_buff;
+ int first_dword, last_dword;
+ int ret_val = 0;
+ int i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ if (!atl1c_check_eeprom_exist(hw)) /* not exist */
+ return -EINVAL;
+
+ eeprom->magic = adapter->pdev->vendor |
+ (adapter->pdev->device << 16);
+
+ first_dword = eeprom->offset >> 2;
+ last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+
+ eeprom_buff = kmalloc(sizeof(u32) *
+ (last_dword - first_dword + 1), GFP_KERNEL);
+ if (eeprom_buff == NULL)
+ return -ENOMEM;
+
+ for (i = first_dword; i < last_dword; i++) {
+ if (!atl1c_read_eeprom(hw, i * 4, &(eeprom_buff[i-first_dword]))) {
+ kfree(eeprom_buff);
+ return -EIO;
+ }
+ }
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+ return 0;
+}
+
+static void atl1c_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver));
+ strncpy(drvinfo->version, atl1c_driver_version,
+ sizeof(drvinfo->version));
+ strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->n_stats = 0;
+ drvinfo->testinfo_len = 0;
+ drvinfo->regdump_len = atl1c_get_regs_len(netdev);
+ drvinfo->eedump_len = atl1c_get_eeprom_len(netdev);
+}
+
+static void atl1c_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_MAGIC | WAKE_PHY;
+ wol->wolopts = 0;
+
+ if (adapter->wol & AT_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & AT_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & AT_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & AT_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & AT_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+
+ return;
+}
+
+static int atl1c_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
+ WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+ return -EOPNOTSUPP;
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= AT_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= AT_WUFC_LNKC;
+
+ return 0;
+}
+
+static int atl1c_nway_reset(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ atl1c_reinit_locked(adapter);
+ return 0;
+}
+
+static struct ethtool_ops atl1c_ethtool_ops = {
+ .get_settings = atl1c_get_settings,
+ .set_settings = atl1c_set_settings,
+ .get_drvinfo = atl1c_get_drvinfo,
+ .get_regs_len = atl1c_get_regs_len,
+ .get_regs = atl1c_get_regs,
+ .get_wol = atl1c_get_wol,
+ .set_wol = atl1c_set_wol,
+ .get_msglevel = atl1c_get_msglevel,
+ .set_msglevel = atl1c_set_msglevel,
+ .nway_reset = atl1c_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = atl1c_get_eeprom_len,
+ .get_eeprom = atl1c_get_eeprom,
+ .get_tx_csum = atl1c_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+};
+
+void atl1c_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &atl1c_ethtool_ops);
+}
--- /dev/null
+/*
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+
+#include "atl1c.h"
+
+/*
+ * check_eeprom_exist
+ * return 1 if eeprom exist
+ */
+int atl1c_check_eeprom_exist(struct atl1c_hw *hw)
+{
+ u32 data;
+
+ AT_READ_REG(hw, REG_TWSI_DEBUG, &data);
+ if (data & TWSI_DEBUG_DEV_EXIST)
+ return 1;
+
+ return 0;
+}
+
+void atl1c_hw_set_mac_addr(struct atl1c_hw *hw)
+{
+ u32 value;
+ /*
+ * 00-0B-6A-F6-00-DC
+ * 0: 6AF600DC 1: 000B
+ * low dword
+ */
+ value = (((u32)hw->mac_addr[2]) << 24) |
+ (((u32)hw->mac_addr[3]) << 16) |
+ (((u32)hw->mac_addr[4]) << 8) |
+ (((u32)hw->mac_addr[5])) ;
+ AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+ /* hight dword */
+ value = (((u32)hw->mac_addr[0]) << 8) |
+ (((u32)hw->mac_addr[1])) ;
+ AT_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
+/*
+ * atl1c_get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int atl1c_get_permanent_address(struct atl1c_hw *hw)
+{
+ u32 addr[2];
+ u32 i;
+ u32 otp_ctrl_data;
+ u32 twsi_ctrl_data;
+ u8 eth_addr[ETH_ALEN];
+
+ /* init */
+ addr[0] = addr[1] = 0;
+ AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
+ if (atl1c_check_eeprom_exist(hw)) {
+ /* Enable OTP CLK */
+ if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
+ otp_ctrl_data |= OTP_CTRL_CLK_EN;
+ AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+ AT_WRITE_FLUSH(hw);
+ msleep(1);
+ }
+
+ AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
+ twsi_ctrl_data |= TWSI_CTRL_SW_LDSTART;
+ AT_WRITE_REG(hw, REG_TWSI_CTRL, twsi_ctrl_data);
+ for (i = 0; i < AT_TWSI_EEPROM_TIMEOUT; i++) {
+ msleep(10);
+ AT_READ_REG(hw, REG_TWSI_CTRL, &twsi_ctrl_data);
+ if ((twsi_ctrl_data & TWSI_CTRL_SW_LDSTART) == 0)
+ break;
+ }
+ if (i >= AT_TWSI_EEPROM_TIMEOUT)
+ return -1;
+ }
+ /* Disable OTP_CLK */
+ if (otp_ctrl_data & OTP_CTRL_CLK_EN) {
+ otp_ctrl_data &= ~OTP_CTRL_CLK_EN;
+ AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+ AT_WRITE_FLUSH(hw);
+ msleep(1);
+ }
+
+ /* maybe MAC-address is from BIOS */
+ AT_READ_REG(hw, REG_MAC_STA_ADDR, &addr[0]);
+ AT_READ_REG(hw, REG_MAC_STA_ADDR + 4, &addr[1]);
+ *(u32 *) ð_addr[2] = swab32(addr[0]);
+ *(u16 *) ð_addr[0] = swab16(*(u16 *)&addr[1]);
+
+ if (is_valid_ether_addr(eth_addr)) {
+ memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
+ return 0;
+ }
+
+ return -1;
+}
+
+bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value)
+{
+ int i;
+ int ret = false;
+ u32 otp_ctrl_data;
+ u32 control;
+ u32 data;
+
+ if (offset & 3)
+ return ret; /* address do not align */
+
+ AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
+ if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
+ AT_WRITE_REG(hw, REG_OTP_CTRL,
+ (otp_ctrl_data | OTP_CTRL_CLK_EN));
+
+ AT_WRITE_REG(hw, REG_EEPROM_DATA_LO, 0);
+ control = (offset & EEPROM_CTRL_ADDR_MASK) << EEPROM_CTRL_ADDR_SHIFT;
+ AT_WRITE_REG(hw, REG_EEPROM_CTRL, control);
+
+ for (i = 0; i < 10; i++) {
+ udelay(100);
+ AT_READ_REG(hw, REG_EEPROM_CTRL, &control);
+ if (control & EEPROM_CTRL_RW)
+ break;
+ }
+ if (control & EEPROM_CTRL_RW) {
+ AT_READ_REG(hw, REG_EEPROM_CTRL, &data);
+ AT_READ_REG(hw, REG_EEPROM_DATA_LO, p_value);
+ data = data & 0xFFFF;
+ *p_value = swab32((data << 16) | (*p_value >> 16));
+ ret = true;
+ }
+ if (!(otp_ctrl_data & OTP_CTRL_CLK_EN))
+ AT_WRITE_REG(hw, REG_OTP_CTRL, otp_ctrl_data);
+
+ return ret;
+}
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+int atl1c_read_mac_addr(struct atl1c_hw *hw)
+{
+ int err = 0;
+
+ err = atl1c_get_permanent_address(hw);
+ if (err)
+ random_ether_addr(hw->perm_mac_addr);
+
+ memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
+ return 0;
+}
+
+/*
+ * atl1c_hash_mc_addr
+ * purpose
+ * set hash value for a multicast address
+ * hash calcu processing :
+ * 1. calcu 32bit CRC for multicast address
+ * 2. reverse crc with MSB to LSB
+ */
+u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr)
+{
+ u32 crc32;
+ u32 value = 0;
+ int i;
+
+ crc32 = ether_crc_le(6, mc_addr);
+ for (i = 0; i < 32; i++)
+ value |= (((crc32 >> i) & 1) << (31 - i));
+
+ return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta;
+
+ /*
+ * The HASH Table is a register array of 2 32-bit registers.
+ * It is treated like an array of 64 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper bit of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 31) & 0x1;
+ hash_bit = (hash_value >> 26) & 0x1F;
+
+ mta = AT_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+ u32 val;
+ int i;
+
+ val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+ MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW |
+ MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+ if (!(val & (MDIO_START | MDIO_BUSY))) {
+ *phy_data = (u16)val;
+ return 0;
+ }
+
+ return -1;
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ int i;
+ u32 val;
+
+ val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+ (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+ MDIO_SUP_PREAMBLE | MDIO_START |
+ MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+
+ AT_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+ for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+ udelay(2);
+ AT_READ_REG(hw, REG_MDIO_CTRL, &val);
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ break;
+ }
+
+ if (!(val & (MDIO_START | MDIO_BUSY)))
+ return 0;
+
+ return -1;
+}
+
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static int atl1c_phy_setup_adv(struct atl1c_hw *hw)
+{
+ u16 mii_adv_data = ADVERTISE_DEFAULT_CAP & ~ADVERTISE_SPEED_MASK;
+ u16 mii_giga_ctrl_data = GIGA_CR_1000T_DEFAULT_CAP &
+ ~GIGA_CR_1000T_SPEED_MASK;
+
+ if (hw->autoneg_advertised & ADVERTISED_10baseT_Half)
+ mii_adv_data |= ADVERTISE_10HALF;
+ if (hw->autoneg_advertised & ADVERTISED_10baseT_Full)
+ mii_adv_data |= ADVERTISE_10FULL;
+ if (hw->autoneg_advertised & ADVERTISED_100baseT_Half)
+ mii_adv_data |= ADVERTISE_100HALF;
+ if (hw->autoneg_advertised & ADVERTISED_100baseT_Full)
+ mii_adv_data |= ADVERTISE_100FULL;
+
+ if (hw->autoneg_advertised & ADVERTISED_Autoneg)
+ mii_adv_data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
+
+ if (hw->ctrl_flags & ATL1C_LINK_CAP_1000M) {
+ if (hw->autoneg_advertised & ADVERTISED_1000baseT_Half)
+ mii_giga_ctrl_data |= ADVERTISE_1000HALF;
+ if (hw->autoneg_advertised & ADVERTISED_1000baseT_Full)
+ mii_giga_ctrl_data |= ADVERTISE_1000FULL;
+ if (hw->autoneg_advertised & ADVERTISED_Autoneg)
+ mii_giga_ctrl_data |= ADVERTISE_1000HALF |
+ ADVERTISE_1000FULL;
+ }
+
+ if (atl1c_write_phy_reg(hw, MII_ADVERTISE, mii_adv_data) != 0 ||
+ atl1c_write_phy_reg(hw, MII_GIGA_CR, mii_giga_ctrl_data) != 0)
+ return -1;
+ return 0;
+}
+
+void atl1c_phy_disable(struct atl1c_hw *hw)
+{
+ AT_WRITE_REGW(hw, REG_GPHY_CTRL,
+ GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET);
+}
+
+static void atl1c_phy_magic_data(struct atl1c_hw *hw)
+{
+ u16 data;
+
+ data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE |
+ ((1 & ANA_INTERVAL_SEL_TIMER_MASK) <<
+ ANA_INTERVAL_SEL_TIMER_SHIFT);
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG |
+ ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL |
+ ANA_SERDES_EN_LCKDT;
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ data = (44 & ANA_LONG_CABLE_TH_100_MASK) |
+ ((33 & ANA_SHORT_CABLE_TH_100_MASK) <<
+ ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM |
+ ANA_BP_SMALL_BW;
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) <<
+ ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
+ ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) <<
+ ANA_IECHO_ADJ_0_SHIFT);
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) <<
+ ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE |
+ ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M;
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0);
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ if (hw->ctrl_flags & ATL1C_HIB_DISABLE) {
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41);
+ if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
+ return;
+ data &= ~ANA_TOP_PS_EN;
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+
+ atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11);
+ if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0)
+ return;
+ data &= ~ANA_PS_HIB_EN;
+ atl1c_write_phy_reg(hw, MII_DBG_DATA, data);
+ }
+}
+
+int atl1c_phy_reset(struct atl1c_hw *hw)
+{
+ struct atl1c_adapter *adapter = hw->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 phy_ctrl_data = GPHY_CTRL_DEFAULT;
+ u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN;
+ int err;
+
+ if (hw->ctrl_flags & ATL1C_HIB_DISABLE)
+ phy_ctrl_data &= ~GPHY_CTRL_HIB_EN;
+
+ AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+ AT_WRITE_FLUSH(hw);
+ msleep(40);
+ phy_ctrl_data |= GPHY_CTRL_EXT_RESET;
+ AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data);
+ AT_WRITE_FLUSH(hw);
+ msleep(10);
+
+ /*Enable PHY LinkChange Interrupt */
+ err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data);
+ if (err) {
+ if (netif_msg_hw(adapter))
+ dev_err(&pdev->dev,
+ "Error enable PHY linkChange Interrupt\n");
+ return err;
+ }
+ if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION))
+ atl1c_phy_magic_data(hw);
+ return 0;
+}
+
+int atl1c_phy_init(struct atl1c_hw *hw)
+{
+ struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+ int ret_val;
+ u16 mii_bmcr_data = BMCR_RESET;
+ u16 phy_id1, phy_id2;
+
+ if ((atl1c_read_phy_reg(hw, MII_PHYSID1, &phy_id1) != 0) ||
+ (atl1c_read_phy_reg(hw, MII_PHYSID2, &phy_id2) != 0)) {
+ if (netif_msg_link(adapter))
+ dev_err(&pdev->dev, "Error get phy ID\n");
+ return -1;
+ }
+ switch (hw->media_type) {
+ case MEDIA_TYPE_AUTO_SENSOR:
+ ret_val = atl1c_phy_setup_adv(hw);
+ if (ret_val) {
+ if (netif_msg_link(adapter))
+ dev_err(&pdev->dev,
+ "Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
+ break;
+ case MEDIA_TYPE_100M_FULL:
+ mii_bmcr_data |= BMCR_SPEED_100 | BMCR_FULL_DUPLEX;
+ break;
+ case MEDIA_TYPE_100M_HALF:
+ mii_bmcr_data |= BMCR_SPEED_100;
+ break;
+ case MEDIA_TYPE_10M_FULL:
+ mii_bmcr_data |= BMCR_SPEED_10 | BMCR_FULL_DUPLEX;
+ break;
+ case MEDIA_TYPE_10M_HALF:
+ mii_bmcr_data |= BMCR_SPEED_10;
+ break;
+ default:
+ if (netif_msg_link(adapter))
+ dev_err(&pdev->dev, "Wrong Media type %d\n",
+ hw->media_type);
+ return -1;
+ break;
+ }
+
+ ret_val = atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
+ if (ret_val)
+ return ret_val;
+ hw->phy_configured = true;
+
+ return 0;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex)
+{
+ int err;
+ u16 phy_data;
+
+ /* Read PHY Specific Status Register (17) */
+ err = atl1c_read_phy_reg(hw, MII_GIGA_PSSR, &phy_data);
+ if (err)
+ return err;
+
+ if (!(phy_data & GIGA_PSSR_SPD_DPLX_RESOLVED))
+ return -1;
+
+ switch (phy_data & GIGA_PSSR_SPEED) {
+ case GIGA_PSSR_1000MBS:
+ *speed = SPEED_1000;
+ break;
+ case GIGA_PSSR_100MBS:
+ *speed = SPEED_100;
+ break;
+ case GIGA_PSSR_10MBS:
+ *speed = SPEED_10;
+ break;
+ default:
+ return -1;
+ break;
+ }
+
+ if (phy_data & GIGA_PSSR_DPLX)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return 0;
+}
+
+int atl1c_restart_autoneg(struct atl1c_hw *hw)
+{
+ int err = 0;
+ u16 mii_bmcr_data = BMCR_RESET;
+
+ err = atl1c_phy_setup_adv(hw);
+ if (err)
+ return err;
+ mii_bmcr_data |= BMCR_AUTO_NEG_EN | BMCR_RESTART_AUTO_NEG;
+
+ return atl1c_write_phy_reg(hw, MII_BMCR, mii_bmcr_data);
+}
--- /dev/null
+/*
+ * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _ATL1C_HW_H_
+#define _ATL1C_HW_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+struct atl1c_adapter;
+struct atl1c_hw;
+
+/* function prototype */
+void atl1c_phy_disable(struct atl1c_hw *hw);
+void atl1c_hw_set_mac_addr(struct atl1c_hw *hw);
+int atl1c_phy_reset(struct atl1c_hw *hw);
+int atl1c_read_mac_addr(struct atl1c_hw *hw);
+int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex);
+u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr);
+void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value);
+int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
+int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data);
+bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
+int atl1c_phy_init(struct atl1c_hw *hw);
+int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
+int atl1c_restart_autoneg(struct atl1c_hw *hw);
+
+/* register definition */
+#define REG_DEVICE_CAP 0x5C
+#define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7
+#define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0
+
+#define REG_DEVICE_CTRL 0x60
+#define DEVICE_CTRL_MAX_PAYLOAD_MASK 0x7
+#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT 5
+#define DEVICE_CTRL_MAX_RREQ_SZ_MASK 0x7
+#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT 12
+
+#define REG_LINK_CTRL 0x68
+#define LINK_CTRL_L0S_EN 0x01
+#define LINK_CTRL_L1_EN 0x02
+
+#define REG_VPD_CAP 0x6C
+#define VPD_CAP_ID_MASK 0xff
+#define VPD_CAP_ID_SHIFT 0
+#define VPD_CAP_NEXT_PTR_MASK 0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT 8
+#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT 16
+#define VPD_CAP_VPD_FLAG 0x80000000
+
+#define REG_VPD_DATA 0x70
+
+#define REG_PCIE_UC_SEVERITY 0x10C
+#define PCIE_UC_SERVRITY_TRN 0x00000001
+#define PCIE_UC_SERVRITY_DLP 0x00000010
+#define PCIE_UC_SERVRITY_PSN_TLP 0x00001000
+#define PCIE_UC_SERVRITY_FCP 0x00002000
+#define PCIE_UC_SERVRITY_CPL_TO 0x00004000
+#define PCIE_UC_SERVRITY_CA 0x00008000
+#define PCIE_UC_SERVRITY_UC 0x00010000
+#define PCIE_UC_SERVRITY_ROV 0x00020000
+#define PCIE_UC_SERVRITY_MLFP 0x00040000
+#define PCIE_UC_SERVRITY_ECRC 0x00080000
+#define PCIE_UC_SERVRITY_UR 0x00100000
+
+#define REG_DEV_SERIALNUM_CTRL 0x200
+#define REG_DEV_MAC_SEL_MASK 0x0 /* 0:EUI; 1:MAC */
+#define REG_DEV_MAC_SEL_SHIFT 0
+#define REG_DEV_SERIAL_NUM_EN_MASK 0x1
+#define REG_DEV_SERIAL_NUM_EN_SHIFT 1
+
+#define REG_TWSI_CTRL 0x218
+#define TWSI_CTRL_LD_OFFSET_MASK 0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT 0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK 0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT 8
+#define TWSI_CTRL_SW_LDSTART 0x800
+#define TWSI_CTRL_HW_LDSTART 0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK 0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT 15
+#define TWSI_CTRL_LD_EXIST 0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT 23
+#define TWSI_CTRL_FREQ_SEL_100K 0
+#define TWSI_CTRL_FREQ_SEL_200K 1
+#define TWSI_CTRL_FREQ_SEL_300K 2
+#define TWSI_CTRL_FREQ_SEL_400K 3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK 0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT 24
+
+
+#define REG_PCIE_DEV_MISC_CTRL 0x21C
+#define PCIE_DEV_MISC_EXT_PIPE 0x2
+#define PCIE_DEV_MISC_RETRY_BUFDIS 0x1
+#define PCIE_DEV_MISC_SPIROM_EXIST 0x4
+#define PCIE_DEV_MISC_SERDES_ENDIAN 0x8
+#define PCIE_DEV_MISC_SERDES_SEL_DIN 0x10
+
+#define REG_PCIE_PHYMISC 0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET 0x4
+
+#define REG_TWSI_DEBUG 0x1108
+#define TWSI_DEBUG_DEV_EXIST 0x20000000
+
+#define REG_EEPROM_CTRL 0x12C0
+#define EEPROM_CTRL_DATA_HI_MASK 0xFFFF
+#define EEPROM_CTRL_DATA_HI_SHIFT 0
+#define EEPROM_CTRL_ADDR_MASK 0x3FF
+#define EEPROM_CTRL_ADDR_SHIFT 16
+#define EEPROM_CTRL_ACK 0x40000000
+#define EEPROM_CTRL_RW 0x80000000
+
+#define REG_EEPROM_DATA_LO 0x12C4
+
+#define REG_OTP_CTRL 0x12F0
+#define OTP_CTRL_CLK_EN 0x0002
+
+#define REG_PM_CTRL 0x12F8
+#define PM_CTRL_SDES_EN 0x00000001
+#define PM_CTRL_RBER_EN 0x00000002
+#define PM_CTRL_CLK_REQ_EN 0x00000004
+#define PM_CTRL_ASPM_L1_EN 0x00000008
+#define PM_CTRL_SERDES_L1_EN 0x00000010
+#define PM_CTRL_SERDES_PLL_L1_EN 0x00000020
+#define PM_CTRL_SERDES_PD_EX_L1 0x00000040
+#define PM_CTRL_SERDES_BUDS_RX_L1_EN 0x00000080
+#define PM_CTRL_L0S_ENTRY_TIMER_MASK 0xF
+#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8
+#define PM_CTRL_ASPM_L0S_EN 0x00001000
+#define PM_CTRL_CLK_SWH_L1 0x00002000
+#define PM_CTRL_CLK_PWM_VER1_1 0x00004000
+#define PM_CTRL_PCIE_RECV 0x00008000
+#define PM_CTRL_L1_ENTRY_TIMER_MASK 0xF
+#define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16
+#define PM_CTRL_PM_REQ_TIMER_MASK 0xF
+#define PM_CTRL_PM_REQ_TIMER_SHIFT 20
+#define PM_CTRL_LCKDET_TIMER_MASK 0x3F
+#define PM_CTRL_LCKDET_TIMER_SHIFT 24
+#define PM_CTRL_MAC_ASPM_CHK 0x40000000
+#define PM_CTRL_HOTRST 0x80000000
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL 0x1400
+#define MASTER_CTRL_SOFT_RST 0x1
+#define MASTER_CTRL_TEST_MODE_MASK 0x3
+#define MASTER_CTRL_TEST_MODE_SHIFT 2
+#define MASTER_CTRL_BERT_START 0x10
+#define MASTER_CTRL_MTIMER_EN 0x100
+#define MASTER_CTRL_MANUAL_INT 0x200
+#define MASTER_CTRL_TX_ITIMER_EN 0x400
+#define MASTER_CTRL_RX_ITIMER_EN 0x800
+#define MASTER_CTRL_CLK_SEL_DIS 0x1000
+#define MASTER_CTRL_CLK_SWH_MODE 0x2000
+#define MASTER_CTRL_INT_RDCLR 0x4000
+#define MASTER_CTRL_REV_NUM_SHIFT 16
+#define MASTER_CTRL_REV_NUM_MASK 0xff
+#define MASTER_CTRL_DEV_ID_SHIFT 24
+#define MASTER_CTRL_DEV_ID_MASK 0x7f
+#define MASTER_CTRL_OTP_SEL 0x80000000
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT 0x1404
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODRT_TIMER_INIT 0x1408
+#define IRQ_MODRT_TIMER_MASK 0xffff
+#define IRQ_MODRT_TX_TIMER_SHIFT 0
+#define IRQ_MODRT_RX_TIMER_SHIFT 16
+
+#define REG_GPHY_CTRL 0x140C
+#define GPHY_CTRL_EXT_RESET 0x1
+#define GPHY_CTRL_RTL_MODE 0x2
+#define GPHY_CTRL_LED_MODE 0x4
+#define GPHY_CTRL_ANEG_NOW 0x8
+#define GPHY_CTRL_REV_ANEG 0x10
+#define GPHY_CTRL_GATE_25M_EN 0x20
+#define GPHY_CTRL_LPW_EXIT 0x40
+#define GPHY_CTRL_PHY_IDDQ 0x80
+#define GPHY_CTRL_PHY_IDDQ_DIS 0x100
+#define GPHY_CTRL_GIGA_DIS 0x200
+#define GPHY_CTRL_HIB_EN 0x400
+#define GPHY_CTRL_HIB_PULSE 0x800
+#define GPHY_CTRL_SEL_ANA_RST 0x1000
+#define GPHY_CTRL_PHY_PLL_ON 0x2000
+#define GPHY_CTRL_PWDOWN_HW 0x4000
+#define GPHY_CTRL_PHY_PLL_BYPASS 0x8000
+
+#define GPHY_CTRL_DEFAULT ( \
+ GPHY_CTRL_SEL_ANA_RST |\
+ GPHY_CTRL_HIB_PULSE |\
+ GPHY_CTRL_HIB_EN)
+
+#define GPHY_CTRL_PW_WOL_DIS ( \
+ GPHY_CTRL_SEL_ANA_RST |\
+ GPHY_CTRL_HIB_PULSE |\
+ GPHY_CTRL_HIB_EN |\
+ GPHY_CTRL_PWDOWN_HW |\
+ GPHY_CTRL_PHY_IDDQ)
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS 0x1410
+#define IDLE_STATUS_MASK 0x00FF
+#define IDLE_STATUS_RXMAC_NO_IDLE 0x1
+#define IDLE_STATUS_TXMAC_NO_IDLE 0x2
+#define IDLE_STATUS_RXQ_NO_IDLE 0x4
+#define IDLE_STATUS_TXQ_NO_IDLE 0x8
+#define IDLE_STATUS_DMAR_NO_IDLE 0x10
+#define IDLE_STATUS_DMAW_NO_IDLE 0x20
+#define IDLE_STATUS_SMB_NO_IDLE 0x40
+#define IDLE_STATUS_CMB_NO_IDLE 0x80
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL 0x1414
+#define MDIO_DATA_MASK 0xffff /* On MDIO write, the 16-bit
+ * control data to write to PHY
+ * MII management register */
+#define MDIO_DATA_SHIFT 0 /* On MDIO read, the 16-bit
+ * status data that was read
+ * from the PHY MII management register */
+#define MDIO_REG_ADDR_MASK 0x1f /* MDIO register address */
+#define MDIO_REG_ADDR_SHIFT 16
+#define MDIO_RW 0x200000 /* 1: read, 0: write */
+#define MDIO_SUP_PREAMBLE 0x400000 /* Suppress preamble */
+#define MDIO_START 0x800000 /* Write 1 to initiate the MDIO
+ * master. And this bit is self
+ * cleared after one cycle */
+#define MDIO_CLK_SEL_SHIFT 24
+#define MDIO_CLK_25_4 0
+#define MDIO_CLK_25_6 2
+#define MDIO_CLK_25_8 3
+#define MDIO_CLK_25_10 4
+#define MDIO_CLK_25_14 5
+#define MDIO_CLK_25_20 6
+#define MDIO_CLK_25_28 7
+#define MDIO_BUSY 0x8000000
+#define MDIO_AP_EN 0x10000000
+#define MDIO_WAIT_TIMES 10
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS 0x1418
+#define PHY_GENERAL_STATUS_MASK 0xFFFF
+#define PHY_STATUS_RECV_ENABLE 0x0001
+#define PHY_OE_PWSP_STATUS_MASK 0x07FF
+#define PHY_OE_PWSP_STATUS_SHIFT 16
+#define PHY_STATUS_LPW_STATE 0x80000000
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL 0x141c
+#define BIST0_NOW 0x1
+#define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is
+ * un-repairable because
+ * it has address decoder
+ * failure or more than 1 cell
+ * stuck-to-x failure */
+#define BIST0_FUSE_FLAG 0x4
+
+/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
+#define REG_BIST1_CTRL 0x1420
+#define BIST1_NOW 0x1
+#define BIST1_SRAM_FAIL 0x2
+#define BIST1_FUSE_FLAG 0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK 0x1424
+#define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal
+ * comes from Analog SerDes */
+#define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */
+
+/* MAC Control Register */
+#define REG_MAC_CTRL 0x1480
+#define MAC_CTRL_TX_EN 0x1
+#define MAC_CTRL_RX_EN 0x2
+#define MAC_CTRL_TX_FLOW 0x4
+#define MAC_CTRL_RX_FLOW 0x8
+#define MAC_CTRL_LOOPBACK 0x10
+#define MAC_CTRL_DUPLX 0x20
+#define MAC_CTRL_ADD_CRC 0x40
+#define MAC_CTRL_PAD 0x80
+#define MAC_CTRL_LENCHK 0x100
+#define MAC_CTRL_HUGE_EN 0x200
+#define MAC_CTRL_PRMLEN_SHIFT 10
+#define MAC_CTRL_PRMLEN_MASK 0xf
+#define MAC_CTRL_RMV_VLAN 0x4000
+#define MAC_CTRL_PROMIS_EN 0x8000
+#define MAC_CTRL_TX_PAUSE 0x10000
+#define MAC_CTRL_SCNT 0x20000
+#define MAC_CTRL_SRST_TX 0x40000
+#define MAC_CTRL_TX_SIMURST 0x80000
+#define MAC_CTRL_SPEED_SHIFT 20
+#define MAC_CTRL_SPEED_MASK 0x3
+#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000
+#define MAC_CTRL_TX_HUGE 0x800000
+#define MAC_CTRL_RX_CHKSUM_EN 0x1000000
+#define MAC_CTRL_MC_ALL_EN 0x2000000
+#define MAC_CTRL_BC_EN 0x4000000
+#define MAC_CTRL_DBG 0x8000000
+#define MAC_CTRL_SINGLE_PAUSE_EN 0x10000000
+
+/* MAC IPG/IFG Control Register */
+#define REG_MAC_IPG_IFG 0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back
+ * inter-packet gap. The
+ * default is 96-bit time */
+#define MAC_IPG_IFG_IPGT_MASK 0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to
+ * enforce in between RX frames */
+#define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */
+#define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */
+#define MAC_IPG_IFG_IPGR1_MASK 0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */
+#define MAC_IPG_IFG_IPGR2_MASK 0x7f
+
+/* MAC STATION ADDRESS */
+#define REG_MAC_STA_ADDR 0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE 0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL 0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* No back-off on backpressure,
+ * immediately start the
+ * transmission after back pressure */
+#define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */
+
+/* Maximum Frame Length Control Register */
+#define REG_MTU 0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL 0x14a0
+#define WOL_PATTERN_EN 0x00000001
+#define WOL_PATTERN_PME_EN 0x00000002
+#define WOL_MAGIC_EN 0x00000004
+#define WOL_MAGIC_PME_EN 0x00000008
+#define WOL_LINK_CHG_EN 0x00000010
+#define WOL_LINK_CHG_PME_EN 0x00000020
+#define WOL_PATTERN_ST 0x00000100
+#define WOL_MAGIC_ST 0x00000200
+#define WOL_LINKCHG_ST 0x00000400
+#define WOL_CLK_SWITCH_EN 0x00008000
+#define WOL_PT0_EN 0x00010000
+#define WOL_PT1_EN 0x00020000
+#define WOL_PT2_EN 0x00040000
+#define WOL_PT3_EN 0x00080000
+#define WOL_PT4_EN 0x00100000
+#define WOL_PT5_EN 0x00200000
+#define WOL_PT6_EN 0x00400000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN 0x14a4
+#define WOL_PT_LEN_MASK 0x7f
+#define WOL_PT0_LEN_SHIFT 0
+#define WOL_PT1_LEN_SHIFT 8
+#define WOL_PT2_LEN_SHIFT 16
+#define WOL_PT3_LEN_SHIFT 24
+#define WOL_PT4_LEN_SHIFT 0
+#define WOL_PT5_LEN_SHIFT 8
+#define WOL_PT6_LEN_SHIFT 16
+
+/* Internal SRAM Partition Register */
+#define RFDX_HEAD_ADDR_MASK 0x03FF
+#define RFDX_HARD_ADDR_SHIFT 0
+#define RFDX_TAIL_ADDR_MASK 0x03FF
+#define RFDX_TAIL_ADDR_SHIFT 16
+
+#define REG_SRAM_RFD0_INFO 0x1500
+#define REG_SRAM_RFD1_INFO 0x1504
+#define REG_SRAM_RFD2_INFO 0x1508
+#define REG_SRAM_RFD3_INFO 0x150C
+
+#define REG_RFD_NIC_LEN 0x1510 /* In 8-bytes */
+#define RFD_NIC_LEN_MASK 0x03FF
+
+#define REG_SRAM_TRD_ADDR 0x1518
+#define TPD_HEAD_ADDR_MASK 0x03FF
+#define TPD_HEAD_ADDR_SHIFT 0
+#define TPD_TAIL_ADDR_MASK 0x03FF
+#define TPD_TAIL_ADDR_SHIFT 16
+
+#define REG_SRAM_TRD_LEN 0x151C /* In 8-bytes */
+#define TPD_NIC_LEN_MASK 0x03FF
+
+#define REG_SRAM_RXF_ADDR 0x1520
+#define REG_SRAM_RXF_LEN 0x1524
+#define REG_SRAM_TXF_ADDR 0x1528
+#define REG_SRAM_TXF_LEN 0x152C
+#define REG_SRAM_TCPH_ADDR 0x1530
+#define REG_SRAM_PKTH_ADDR 0x1532
+
+/*
+ * Load Ptr Register
+ * Software sets this bit after the initialization of the head and tail */
+#define REG_LOAD_PTR 0x1534
+
+/*
+ * addresses of all descriptors, as well as the following descriptor
+ * control register, which triggers each function block to load the head
+ * pointer to prepare for the operation. This bit is then self-cleared
+ * after one cycle.
+ */
+#define REG_RX_BASE_ADDR_HI 0x1540
+#define REG_TX_BASE_ADDR_HI 0x1544
+#define REG_SMB_BASE_ADDR_HI 0x1548
+#define REG_SMB_BASE_ADDR_LO 0x154C
+#define REG_RFD0_HEAD_ADDR_LO 0x1550
+#define REG_RFD1_HEAD_ADDR_LO 0x1554
+#define REG_RFD2_HEAD_ADDR_LO 0x1558
+#define REG_RFD3_HEAD_ADDR_LO 0x155C
+#define REG_RFD_RING_SIZE 0x1560
+#define RFD_RING_SIZE_MASK 0x0FFF
+#define REG_RX_BUF_SIZE 0x1564
+#define RX_BUF_SIZE_MASK 0xFFFF
+#define REG_RRD0_HEAD_ADDR_LO 0x1568
+#define REG_RRD1_HEAD_ADDR_LO 0x156C
+#define REG_RRD2_HEAD_ADDR_LO 0x1570
+#define REG_RRD3_HEAD_ADDR_LO 0x1574
+#define REG_RRD_RING_SIZE 0x1578
+#define RRD_RING_SIZE_MASK 0x0FFF
+#define REG_HTPD_HEAD_ADDR_LO 0x157C
+#define REG_NTPD_HEAD_ADDR_LO 0x1580
+#define REG_TPD_RING_SIZE 0x1584
+#define TPD_RING_SIZE_MASK 0xFFFF
+#define REG_CMB_BASE_ADDR_LO 0x1588
+
+/* RSS about */
+#define REG_RSS_KEY0 0x14B0
+#define REG_RSS_KEY1 0x14B4
+#define REG_RSS_KEY2 0x14B8
+#define REG_RSS_KEY3 0x14BC
+#define REG_RSS_KEY4 0x14C0
+#define REG_RSS_KEY5 0x14C4
+#define REG_RSS_KEY6 0x14C8
+#define REG_RSS_KEY7 0x14CC
+#define REG_RSS_KEY8 0x14D0
+#define REG_RSS_KEY9 0x14D4
+#define REG_IDT_TABLE0 0x14E0
+#define REG_IDT_TABLE1 0x14E4
+#define REG_IDT_TABLE2 0x14E8
+#define REG_IDT_TABLE3 0x14EC
+#define REG_IDT_TABLE4 0x14F0
+#define REG_IDT_TABLE5 0x14F4
+#define REG_IDT_TABLE6 0x14F8
+#define REG_IDT_TABLE7 0x14FC
+#define REG_IDT_TABLE REG_IDT_TABLE0
+#define REG_RSS_HASH_VALUE 0x15B0
+#define REG_RSS_HASH_FLAG 0x15B4
+#define REG_BASE_CPU_NUMBER 0x15B8
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL 0x1590
+#define TXQ_NUM_TPD_BURST_MASK 0xF
+#define TXQ_NUM_TPD_BURST_SHIFT 0
+#define TXQ_CTRL_IP_OPTION_EN 0x10
+#define TXQ_CTRL_EN 0x20
+#define TXQ_CTRL_ENH_MODE 0x40
+#define TXQ_CTRL_LS_8023_EN 0x80
+#define TXQ_TXF_BURST_NUM_SHIFT 16
+#define TXQ_TXF_BURST_NUM_MASK 0xFFFF
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */
+#define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF
+
+#define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */
+#define TXF_WATER_MARK_MASK 0x0FFF
+#define TXF_LOW_WATER_MARK_SHIFT 0
+#define TXF_HIGH_WATER_MARK_SHIFT 16
+#define TXQ_CTRL_BURST_MODE_EN 0x80000000
+
+#define REG_THRUPUT_MON_CTRL 0x159C
+#define THRUPUT_MON_RATE_MASK 0x3
+#define THRUPUT_MON_RATE_SHIFT 0
+#define THRUPUT_MON_EN 0x80
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL 0x15A0
+#define ASPM_THRUPUT_LIMIT_MASK 0x3
+#define ASPM_THRUPUT_LIMIT_SHIFT 0
+#define ASPM_THRUPUT_LIMIT_NO 0x00
+#define ASPM_THRUPUT_LIMIT_1M 0x01
+#define ASPM_THRUPUT_LIMIT_10M 0x02
+#define ASPM_THRUPUT_LIMIT_100M 0x04
+#define RXQ1_CTRL_EN 0x10
+#define RXQ2_CTRL_EN 0x20
+#define RXQ3_CTRL_EN 0x40
+#define IPV6_CHKSUM_CTRL_EN 0x80
+#define RSS_HASH_BITS_MASK 0x00FF
+#define RSS_HASH_BITS_SHIFT 8
+#define RSS_HASH_IPV4 0x10000
+#define RSS_HASH_IPV4_TCP 0x20000
+#define RSS_HASH_IPV6 0x40000
+#define RSS_HASH_IPV6_TCP 0x80000
+#define RXQ_RFD_BURST_NUM_MASK 0x003F
+#define RXQ_RFD_BURST_NUM_SHIFT 20
+#define RSS_MODE_MASK 0x0003
+#define RSS_MODE_SHIFT 26
+#define RSS_NIP_QUEUE_SEL_MASK 0x1
+#define RSS_NIP_QUEUE_SEL_SHIFT 28
+#define RRS_HASH_CTRL_EN 0x20000000
+#define RX_CUT_THRU_EN 0x40000000
+#define RXQ_CTRL_EN 0x80000000
+
+#define REG_RFD_FREE_THRESH 0x15A4
+#define RFD_FREE_THRESH_MASK 0x003F
+#define RFD_FREE_HI_THRESH_SHIFT 0
+#define RFD_FREE_LO_THRESH_SHIFT 6
+
+/* RXF flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT 0
+#define RXQ_RXF_PAUSE_TH_HI_MASK 0x0FFF
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT 16
+#define RXQ_RXF_PAUSE_TH_LO_MASK 0x0FFF
+
+#define REG_RXD_DMA_CTRL 0x15AC
+#define RXD_DMA_THRESH_MASK 0x0FFF /* In 8-bytes */
+#define RXD_DMA_THRESH_SHIFT 0
+#define RXD_DMA_DOWN_TIMER_MASK 0xFFFF
+#define RXD_DMA_DOWN_TIMER_SHIFT 16
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL 0x15C0
+#define DMA_CTRL_DMAR_IN_ORDER 0x1
+#define DMA_CTRL_DMAR_ENH_ORDER 0x2
+#define DMA_CTRL_DMAR_OUT_ORDER 0x4
+#define DMA_CTRL_RCB_VALUE 0x8
+#define DMA_CTRL_DMAR_BURST_LEN_MASK 0x0007
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4
+#define DMA_CTRL_DMAW_BURST_LEN_MASK 0x0007
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7
+#define DMA_CTRL_DMAR_REQ_PRI 0x400
+#define DMA_CTRL_DMAR_DLY_CNT_MASK 0x001F
+#define DMA_CTRL_DMAR_DLY_CNT_SHIFT 11
+#define DMA_CTRL_DMAW_DLY_CNT_MASK 0x000F
+#define DMA_CTRL_DMAW_DLY_CNT_SHIFT 16
+#define DMA_CTRL_CMB_EN 0x100000
+#define DMA_CTRL_SMB_EN 0x200000
+#define DMA_CTRL_CMB_NOW 0x400000
+#define MAC_CTRL_SMB_DIS 0x1000000
+#define DMA_CTRL_SMB_NOW 0x80000000
+
+/* CMB/SMB Control Register */
+#define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */
+#define SMB_STAT_TIMER_MASK 0xFFFFFF
+#define REG_CMB_TPD_THRESH 0x15C8
+#define CMB_TPD_THRESH_MASK 0xFFFF
+#define REG_CMB_TX_TIMER 0x15CC /* 2us resolution */
+#define CMB_TX_TIMER_MASK 0xFFFF
+
+/* Mail box */
+#define MB_RFDX_PROD_IDX_MASK 0xFFFF
+#define REG_MB_RFD0_PROD_IDX 0x15E0
+#define REG_MB_RFD1_PROD_IDX 0x15E4
+#define REG_MB_RFD2_PROD_IDX 0x15E8
+#define REG_MB_RFD3_PROD_IDX 0x15EC
+
+#define MB_PRIO_PROD_IDX_MASK 0xFFFF
+#define REG_MB_PRIO_PROD_IDX 0x15F0
+#define MB_HTPD_PROD_IDX_SHIFT 0
+#define MB_NTPD_PROD_IDX_SHIFT 16
+
+#define MB_PRIO_CONS_IDX_MASK 0xFFFF
+#define REG_MB_PRIO_CONS_IDX 0x15F4
+#define MB_HTPD_CONS_IDX_SHIFT 0
+#define MB_NTPD_CONS_IDX_SHIFT 16
+
+#define REG_MB_RFD01_CONS_IDX 0x15F8
+#define MB_RFD0_CONS_IDX_MASK 0x0000FFFF
+#define MB_RFD1_CONS_IDX_MASK 0xFFFF0000
+#define REG_MB_RFD23_CONS_IDX 0x15FC
+#define MB_RFD2_CONS_IDX_MASK 0x0000FFFF
+#define MB_RFD3_CONS_IDX_MASK 0xFFFF0000
+
+/* Interrupt Status Register */
+#define REG_ISR 0x1600
+#define ISR_SMB 0x00000001
+#define ISR_TIMER 0x00000002
+/*
+ * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
+ * in Table 51 Selene Master Control Register (Offset 0x1400).
+ */
+#define ISR_MANUAL 0x00000004
+#define ISR_HW_RXF_OV 0x00000008 /* RXF overflow interrupt */
+#define ISR_RFD0_UR 0x00000010 /* RFD0 under run */
+#define ISR_RFD1_UR 0x00000020
+#define ISR_RFD2_UR 0x00000040
+#define ISR_RFD3_UR 0x00000080
+#define ISR_TXF_UR 0x00000100
+#define ISR_DMAR_TO_RST 0x00000200
+#define ISR_DMAW_TO_RST 0x00000400
+#define ISR_TX_CREDIT 0x00000800
+#define ISR_GPHY 0x00001000
+/* GPHY low power state interrupt */
+#define ISR_GPHY_LPW 0x00002000
+#define ISR_TXQ_TO_RST 0x00004000
+#define ISR_TX_PKT 0x00008000
+#define ISR_RX_PKT_0 0x00010000
+#define ISR_RX_PKT_1 0x00020000
+#define ISR_RX_PKT_2 0x00040000
+#define ISR_RX_PKT_3 0x00080000
+#define ISR_MAC_RX 0x00100000
+#define ISR_MAC_TX 0x00200000
+#define ISR_UR_DETECTED 0x00400000
+#define ISR_FERR_DETECTED 0x00800000
+#define ISR_NFERR_DETECTED 0x01000000
+#define ISR_CERR_DETECTED 0x02000000
+#define ISR_PHY_LINKDOWN 0x04000000
+#define ISR_DIS_INT 0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR 0x1604
+
+#define IMR_NORMAL_MASK (\
+ ISR_MANUAL |\
+ ISR_HW_RXF_OV |\
+ ISR_RFD0_UR |\
+ ISR_TXF_UR |\
+ ISR_DMAR_TO_RST |\
+ ISR_TXQ_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_GPHY |\
+ ISR_TX_PKT |\
+ ISR_RX_PKT_0 |\
+ ISR_GPHY_LPW |\
+ ISR_PHY_LINKDOWN)
+
+#define ISR_RX_PKT (\
+ ISR_RX_PKT_0 |\
+ ISR_RX_PKT_1 |\
+ ISR_RX_PKT_2 |\
+ ISR_RX_PKT_3)
+
+#define ISR_OVER (\
+ ISR_RFD0_UR |\
+ ISR_RFD1_UR |\
+ ISR_RFD2_UR |\
+ ISR_RFD3_UR |\
+ ISR_HW_RXF_OV |\
+ ISR_TXF_UR)
+
+#define ISR_ERROR (\
+ ISR_DMAR_TO_RST |\
+ ISR_TXQ_TO_RST |\
+ ISR_DMAW_TO_RST |\
+ ISR_PHY_LINKDOWN)
+
+#define REG_INT_RETRIG_TIMER 0x1608
+#define INT_RETRIG_TIMER_MASK 0xFFFF
+
+#define REG_HDS_CTRL 0x160C
+#define HDS_CTRL_EN 0x0001
+#define HDS_CTRL_BACKFILLSIZE_SHIFT 8
+#define HDS_CTRL_BACKFILLSIZE_MASK 0x0FFF
+#define HDS_CTRL_MAX_HDRSIZE_SHIFT 20
+#define HDS_CTRL_MAC_HDRSIZE_MASK 0x0FFF
+
+#define REG_MAC_RX_STATUS_BIN 0x1700
+#define REG_MAC_RX_STATUS_END 0x175c
+#define REG_MAC_TX_STATUS_BIN 0x1760
+#define REG_MAC_TX_STATUS_END 0x17c0
+
+/* DEBUG ADDR */
+#define REG_DEBUG_DATA0 0x1900
+#define REG_DEBUG_DATA1 0x1904
+
+/* PHY Control Register */
+#define MII_BMCR 0x00
+#define BMCR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define BMCR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define BMCR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define BMCR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define BMCR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define BMCR_POWER_DOWN 0x0800 /* Power down */
+#define BMCR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define BMCR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define BMCR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define BMCR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define BMCR_SPEED_MASK 0x2040
+#define BMCR_SPEED_1000 0x0040
+#define BMCR_SPEED_100 0x2000
+#define BMCR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_BMSR 0x01
+#define BMMSR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define BMSR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define BMSR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define BMSR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define BMSR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define BMSR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define BMSR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define BMSR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define BMSR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define BMSR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define BMSR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define BMSR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define BMSR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define BMMII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define BMMII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+#define MII_PHYSID1 0x02
+#define MII_PHYSID2 0x03
+
+/* Autoneg Advertisement Register */
+#define MII_ADVERTISE 0x04
+#define ADVERTISE_SPEED_MASK 0x01E0
+#define ADVERTISE_DEFAULT_CAP 0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_GIGA_CR 0x09
+#define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */
+
+#define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */
+#define GIGA_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+#define GIGA_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define GIGA_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define GIGA_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define GIGA_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define GIGA_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+#define GIGA_CR_1000T_SPEED_MASK 0x0300
+#define GIGA_CR_1000T_DEFAULT_CAP 0x0300
+
+/* PHY Specific Status Register */
+#define MII_GIGA_PSSR 0x11
+#define GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define GIGA_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define GIGA_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define GIGA_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define GIGA_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define GIGA_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+/* PHY Interrupt Enable Register */
+#define MII_IER 0x12
+#define IER_LINK_UP 0x0400
+#define IER_LINK_DOWN 0x0800
+
+/* PHY Interrupt Status Register */
+#define MII_ISR 0x13
+#define ISR_LINK_UP 0x0400
+#define ISR_LINK_DOWN 0x0800
+
+/* Cable-Detect-Test Control Register */
+#define MII_CDTC 0x16
+#define CDTC_EN_OFF 0 /* sc */
+#define CDTC_EN_BITS 1
+#define CDTC_PAIR_OFF 8
+#define CDTC_PAIR_BIT 2
+
+/* Cable-Detect-Test Status Register */
+#define MII_CDTS 0x1C
+#define CDTS_STATUS_OFF 8
+#define CDTS_STATUS_BITS 2
+#define CDTS_STATUS_NORMAL 0
+#define CDTS_STATUS_SHORT 1
+#define CDTS_STATUS_OPEN 2
+#define CDTS_STATUS_INVALID 3
+
+#define MII_DBG_ADDR 0x1D
+#define MII_DBG_DATA 0x1E
+
+#define MII_ANA_CTRL_0 0x0
+#define ANA_RESTART_CAL 0x0001
+#define ANA_MANUL_SWICH_ON_SHIFT 0x1
+#define ANA_MANUL_SWICH_ON_MASK 0xF
+#define ANA_MAN_ENABLE 0x0020
+#define ANA_SEL_HSP 0x0040
+#define ANA_EN_HB 0x0080
+#define ANA_EN_HBIAS 0x0100
+#define ANA_OEN_125M 0x0200
+#define ANA_EN_LCKDT 0x0400
+#define ANA_LCKDT_PHY 0x0800
+#define ANA_AFE_MODE 0x1000
+#define ANA_VCO_SLOW 0x2000
+#define ANA_VCO_FAST 0x4000
+#define ANA_SEL_CLK125M_DSP 0x8000
+
+#define MII_ANA_CTRL_4 0x4
+#define ANA_IECHO_ADJ_MASK 0xF
+#define ANA_IECHO_ADJ_3_SHIFT 0
+#define ANA_IECHO_ADJ_2_SHIFT 4
+#define ANA_IECHO_ADJ_1_SHIFT 8
+#define ANA_IECHO_ADJ_0_SHIFT 12
+
+#define MII_ANA_CTRL_5 0x5
+#define ANA_SERDES_CDR_BW_SHIFT 0
+#define ANA_SERDES_CDR_BW_MASK 0x3
+#define ANA_MS_PAD_DBG 0x0004
+#define ANA_SPEEDUP_DBG 0x0008
+#define ANA_SERDES_TH_LOS_SHIFT 4
+#define ANA_SERDES_TH_LOS_MASK 0x3
+#define ANA_SERDES_EN_DEEM 0x0040
+#define ANA_SERDES_TXELECIDLE 0x0080
+#define ANA_SERDES_BEACON 0x0100
+#define ANA_SERDES_HALFTXDR 0x0200
+#define ANA_SERDES_SEL_HSP 0x0400
+#define ANA_SERDES_EN_PLL 0x0800
+#define ANA_SERDES_EN 0x1000
+#define ANA_SERDES_EN_LCKDT 0x2000
+
+#define MII_ANA_CTRL_11 0xB
+#define ANA_PS_HIB_EN 0x8000
+
+#define MII_ANA_CTRL_18 0x12
+#define ANA_TEST_MODE_10BT_01SHIFT 0
+#define ANA_TEST_MODE_10BT_01MASK 0x3
+#define ANA_LOOP_SEL_10BT 0x0004
+#define ANA_RGMII_MODE_SW 0x0008
+#define ANA_EN_LONGECABLE 0x0010
+#define ANA_TEST_MODE_10BT_2 0x0020
+#define ANA_EN_10BT_IDLE 0x0400
+#define ANA_EN_MASK_TB 0x0800
+#define ANA_TRIGGER_SEL_TIMER_SHIFT 12
+#define ANA_TRIGGER_SEL_TIMER_MASK 0x3
+#define ANA_INTERVAL_SEL_TIMER_SHIFT 14
+#define ANA_INTERVAL_SEL_TIMER_MASK 0x3
+
+#define MII_ANA_CTRL_41 0x29
+#define ANA_TOP_PS_EN 0x8000
+
+#define MII_ANA_CTRL_54 0x36
+#define ANA_LONG_CABLE_TH_100_SHIFT 0
+#define ANA_LONG_CABLE_TH_100_MASK 0x3F
+#define ANA_DESERVED 0x0040
+#define ANA_EN_LIT_CH 0x0080
+#define ANA_SHORT_CABLE_TH_100_SHIFT 8
+#define ANA_SHORT_CABLE_TH_100_MASK 0x3F
+#define ANA_BP_BAD_LINK_ACCUM 0x4000
+#define ANA_BP_SMALL_BW 0x8000
+
+#endif /*_ATL1C_HW_H_*/
--- /dev/null
+/*
+ * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "atl1c.h"
+
+#define ATL1C_DRV_VERSION "1.0.0.1-NAPI"
+char atl1c_driver_name[] = "atl1c";
+char atl1c_driver_version[] = ATL1C_DRV_VERSION;
+#define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062
+#define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063
+/*
+ * atl1c_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static struct pci_device_id atl1c_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
+ /* required last entry */
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
+
+MODULE_AUTHOR("Jie Yang <jie.yang@atheros.com>");
+MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATL1C_DRV_VERSION);
+
+static int atl1c_stop_mac(struct atl1c_hw *hw);
+static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw);
+static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw);
+static void atl1c_disable_l0s_l1(struct atl1c_hw *hw);
+static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup);
+static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter);
+static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
+ int *work_done, int work_to_do);
+
+static const u16 atl1c_pay_load_size[] = {
+ 128, 256, 512, 1024, 2048, 4096,
+};
+
+static const u16 atl1c_rfd_prod_idx_regs[AT_MAX_RECEIVE_QUEUE] =
+{
+ REG_MB_RFD0_PROD_IDX,
+ REG_MB_RFD1_PROD_IDX,
+ REG_MB_RFD2_PROD_IDX,
+ REG_MB_RFD3_PROD_IDX
+};
+
+static const u16 atl1c_rfd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] =
+{
+ REG_RFD0_HEAD_ADDR_LO,
+ REG_RFD1_HEAD_ADDR_LO,
+ REG_RFD2_HEAD_ADDR_LO,
+ REG_RFD3_HEAD_ADDR_LO
+};
+
+static const u16 atl1c_rrd_addr_lo_regs[AT_MAX_RECEIVE_QUEUE] =
+{
+ REG_RRD0_HEAD_ADDR_LO,
+ REG_RRD1_HEAD_ADDR_LO,
+ REG_RRD2_HEAD_ADDR_LO,
+ REG_RRD3_HEAD_ADDR_LO
+};
+
+static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
+
+/*
+ * atl1c_init_pcie - init PCIE module
+ */
+static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag)
+{
+ u32 data;
+ u32 pci_cmd;
+ struct pci_dev *pdev = hw->adapter->pdev;
+
+ AT_READ_REG(hw, PCI_COMMAND, &pci_cmd);
+ pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO);
+ AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd);
+
+ /*
+ * Clear any PowerSaveing Settings
+ */
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ /*
+ * Mask some pcie error bits
+ */
+ AT_READ_REG(hw, REG_PCIE_UC_SEVERITY, &data);
+ data &= ~PCIE_UC_SERVRITY_DLP;
+ data &= ~PCIE_UC_SERVRITY_FCP;
+ AT_WRITE_REG(hw, REG_PCIE_UC_SEVERITY, data);
+
+ if (flag & ATL1C_PCIE_L0S_L1_DISABLE)
+ atl1c_disable_l0s_l1(hw);
+ if (flag & ATL1C_PCIE_PHY_RESET)
+ AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT);
+ else
+ AT_WRITE_REG(hw, REG_GPHY_CTRL,
+ GPHY_CTRL_DEFAULT | GPHY_CTRL_EXT_RESET);
+
+ msleep(1);
+}
+
+/*
+ * atl1c_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static inline void atl1c_irq_enable(struct atl1c_adapter *adapter)
+{
+ if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
+ AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
+ AT_WRITE_FLUSH(&adapter->hw);
+ }
+}
+
+/*
+ * atl1c_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1c_irq_disable(struct atl1c_adapter *adapter)
+{
+ atomic_inc(&adapter->irq_sem);
+ AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
+ AT_WRITE_FLUSH(&adapter->hw);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/*
+ * atl1c_irq_reset - reset interrupt confiure on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
+{
+ atomic_set(&adapter->irq_sem, 1);
+ atl1c_irq_enable(adapter);
+}
+
+/*
+ * atl1c_phy_config - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ */
+static void atl1c_phy_config(unsigned long data)
+{
+ struct atl1c_adapter *adapter = (struct atl1c_adapter *) data;
+ struct atl1c_hw *hw = &adapter->hw;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ atl1c_restart_autoneg(hw);
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+}
+
+void atl1c_reinit_locked(struct atl1c_adapter *adapter)
+{
+
+ WARN_ON(in_interrupt());
+ atl1c_down(adapter);
+ atl1c_up(adapter);
+ clear_bit(__AT_RESETTING, &adapter->flags);
+}
+
+static void atl1c_reset_task(struct work_struct *work)
+{
+ struct atl1c_adapter *adapter;
+ struct net_device *netdev;
+
+ adapter = container_of(work, struct atl1c_adapter, reset_task);
+ netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+ atl1c_down(adapter);
+ atl1c_up(adapter);
+ netif_device_attach(netdev);
+}
+
+static void atl1c_check_link_status(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+ unsigned long flags;
+ u16 speed, duplex, phy_data;
+
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ /* MII_BMSR must read twise */
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+
+ if ((phy_data & BMSR_LSTATUS) == 0) {
+ /* link down */
+ if (netif_carrier_ok(netdev)) {
+ hw->hibernate = true;
+ atl1c_set_aspm(hw, false);
+ if (atl1c_stop_mac(hw) != 0)
+ if (netif_msg_hw(adapter))
+ dev_warn(&pdev->dev,
+ "stop mac failed\n");
+ }
+ netif_carrier_off(netdev);
+ } else {
+ /* Link Up */
+ hw->hibernate = false;
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ err = atl1c_get_speed_and_duplex(hw, &speed, &duplex);
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+ if (unlikely(err))
+ return;
+ /* link result is our setting */
+ if (adapter->link_speed != speed ||
+ adapter->link_duplex != duplex) {
+ adapter->link_speed = speed;
+ adapter->link_duplex = duplex;
+ atl1c_enable_tx_ctrl(hw);
+ atl1c_enable_rx_ctrl(hw);
+ atl1c_setup_mac_ctrl(adapter);
+ atl1c_set_aspm(hw, true);
+ if (netif_msg_link(adapter))
+ dev_info(&pdev->dev,
+ "%s: %s NIC Link is Up<%d Mbps %s>\n",
+ atl1c_driver_name, netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex");
+ }
+ if (!netif_carrier_ok(netdev))
+ netif_carrier_on(netdev);
+ }
+}
+
+/*
+ * atl1c_link_chg_task - deal with link change event Out of interrupt context
+ * @netdev: network interface device structure
+ */
+static void atl1c_link_chg_task(struct work_struct *work)
+{
+ struct atl1c_adapter *adapter;
+
+ adapter = container_of(work, struct atl1c_adapter, link_chg_task);
+ atl1c_check_link_status(adapter);
+}
+
+static void atl1c_link_chg_event(struct atl1c_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ u16 phy_data;
+ u16 link_up;
+
+ spin_lock(&adapter->mdio_lock);
+ atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+ spin_unlock(&adapter->mdio_lock);
+ link_up = phy_data & BMSR_LSTATUS;
+ /* notify upper layer link down ASAP */
+ if (!link_up) {
+ if (netif_carrier_ok(netdev)) {
+ /* old link state: Up */
+ netif_carrier_off(netdev);
+ if (netif_msg_link(adapter))
+ dev_info(&pdev->dev,
+ "%s: %s NIC Link is Down\n",
+ atl1c_driver_name, netdev->name);
+ adapter->link_speed = SPEED_0;
+ }
+ }
+ schedule_work(&adapter->link_chg_task);
+}
+
+static void atl1c_del_timer(struct atl1c_adapter *adapter)
+{
+ del_timer_sync(&adapter->phy_config_timer);
+}
+
+static void atl1c_cancel_work(struct atl1c_adapter *adapter)
+{
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->link_chg_task);
+}
+
+/*
+ * atl1c_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ */
+static void atl1c_tx_timeout(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->reset_task);
+}
+
+/*
+ * atl1c_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atl1c_set_multi(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+ struct dev_mc_list *mc_ptr;
+ u32 mac_ctrl_data;
+ u32 hash_value;
+
+ /* Check for Promiscuous and All Multicast modes */
+ AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
+
+ if (netdev->flags & IFF_PROMISC) {
+ mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+ } else if (netdev->flags & IFF_ALLMULTI) {
+ mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+ mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN;
+ } else {
+ mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+ }
+
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+
+ /* clear the old settings from the multicast hash table */
+ AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+ AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+ /* comoute mc addresses' hash value ,and put it into hash table */
+ for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+ hash_value = atl1c_hash_mc_addr(hw, mc_ptr->dmi_addr);
+ atl1c_hash_set(hw, hash_value);
+ }
+}
+
+static void atl1c_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ u32 mac_ctrl_data = 0;
+
+ if (netif_msg_pktdata(adapter))
+ dev_dbg(&pdev->dev, "atl1c_vlan_rx_register\n");
+
+ atl1c_irq_disable(adapter);
+
+ adapter->vlgrp = grp;
+ AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data);
+
+ if (grp) {
+ /* enable VLAN tag insert/strip */
+ mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+ } else {
+ /* disable VLAN tag insert/strip */
+ mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN;
+ }
+
+ AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
+ atl1c_irq_enable(adapter);
+}
+
+static void atl1c_restore_vlan(struct atl1c_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ if (netif_msg_pktdata(adapter))
+ dev_dbg(&pdev->dev, "atl1c_restore_vlan !");
+ atl1c_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+}
+/*
+ * atl1c_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1c_set_mac_addr(struct net_device *netdev, void *p)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+ atl1c_hw_set_mac_addr(&adapter->hw);
+
+ return 0;
+}
+
+static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
+ struct net_device *dev)
+{
+ int mtu = dev->mtu;
+
+ adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
+ roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
+}
+/*
+ * atl1c_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ int old_mtu = netdev->mtu;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
+
+ if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ if (netif_msg_link(adapter))
+ dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
+ return -EINVAL;
+ }
+ /* set MTU */
+ if (old_mtu != new_mtu && netif_running(netdev)) {
+ while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
+ msleep(1);
+ netdev->mtu = new_mtu;
+ adapter->hw.max_frame_size = new_mtu;
+ atl1c_set_rxbufsize(adapter, netdev);
+ atl1c_down(adapter);
+ atl1c_up(adapter);
+ clear_bit(__AT_RESETTING, &adapter->flags);
+ if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
+ u32 phy_data;
+
+ AT_READ_REG(&adapter->hw, 0x1414, &phy_data);
+ phy_data |= 0x10000000;
+ AT_WRITE_REG(&adapter->hw, 0x1414, phy_data);
+ }
+
+ }
+ return 0;
+}
+
+/*
+ * caller should hold mdio_lock
+ */
+static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ u16 result;
+
+ atl1c_read_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, &result);
+ return result;
+}
+
+static void atl1c_mdio_write(struct net_device *netdev, int phy_id,
+ int reg_num, int val)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ atl1c_write_phy_reg(&adapter->hw, reg_num & MDIO_REG_ADDR_MASK, val);
+}
+
+/*
+ * atl1c_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl1c_mii_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ unsigned long flags;
+ int retval = 0;
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ spin_lock_irqsave(&adapter->mdio_lock, flags);
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = 0;
+ break;
+
+ case SIOCGMIIREG:
+ if (!capable(CAP_NET_ADMIN)) {
+ retval = -EPERM;
+ goto out;
+ }
+ if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ retval = -EIO;
+ goto out;
+ }
+ break;
+
+ case SIOCSMIIREG:
+ if (!capable(CAP_NET_ADMIN)) {
+ retval = -EPERM;
+ goto out;
+ }
+ if (data->reg_num & ~(0x1F)) {
+ retval = -EFAULT;
+ goto out;
+ }
+
+ dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x",
+ data->reg_num, data->val_in);
+ if (atl1c_write_phy_reg(&adapter->hw,
+ data->reg_num, data->val_in)) {
+ retval = -EIO;
+ goto out;
+ }
+ break;
+
+ default:
+ retval = -EOPNOTSUPP;
+ break;
+ }
+out:
+ spin_unlock_irqrestore(&adapter->mdio_lock, flags);
+ return retval;
+}
+
+/*
+ * atl1c_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return atl1c_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/*
+ * atl1c_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ */
+static int __devinit atl1c_alloc_queues(struct atl1c_adapter *adapter)
+{
+ return 0;
+}
+
+static void atl1c_set_mac_type(struct atl1c_hw *hw)
+{
+ switch (hw->device_id) {
+ case PCI_DEVICE_ID_ATTANSIC_L2C:
+ hw->nic_type = athr_l2c;
+ break;
+
+ case PCI_DEVICE_ID_ATTANSIC_L1C:
+ hw->nic_type = athr_l1c;
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
+{
+ u32 phy_status_data;
+ u32 link_ctrl_data;
+
+ atl1c_set_mac_type(hw);
+ AT_READ_REG(hw, REG_PHY_STATUS, &phy_status_data);
+ AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
+
+ hw->ctrl_flags = ATL1C_INTR_CLEAR_ON_READ |
+ ATL1C_INTR_MODRT_ENABLE |
+ ATL1C_RX_IPV6_CHKSUM |
+ ATL1C_TXQ_MODE_ENHANCE;
+ if (link_ctrl_data & LINK_CTRL_L0S_EN)
+ hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT;
+ if (link_ctrl_data & LINK_CTRL_L1_EN)
+ hw->ctrl_flags |= ATL1C_ASPM_L1_SUPPORT;
+
+ if (hw->nic_type == athr_l1c) {
+ hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON;
+ hw->ctrl_flags |= ATL1C_LINK_CAP_1000M;
+ }
+ return 0;
+}
+/*
+ * atl1c_sw_init - Initialize general software structures (struct atl1c_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * atl1c_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ */
+static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ adapter->wol = 0;
+ adapter->link_speed = SPEED_0;
+ adapter->link_duplex = FULL_DUPLEX;
+ adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
+ adapter->tpd_ring[0].count = 1024;
+ adapter->rfd_ring[0].count = 512;
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+
+ /* before link up, we assume hibernate is true */
+ hw->hibernate = true;
+ hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
+ if (atl1c_setup_mac_funcs(hw) != 0) {
+ dev_err(&pdev->dev, "set mac function pointers failed\n");
+ return -1;
+ }
+ hw->intr_mask = IMR_NORMAL_MASK;
+ hw->phy_configured = false;
+ hw->preamble_len = 7;
+ hw->max_frame_size = adapter->netdev->mtu;
+ if (adapter->num_rx_queues < 2) {
+ hw->rss_type = atl1c_rss_disable;
+ hw->rss_mode = atl1c_rss_mode_disable;
+ } else {
+ hw->rss_type = atl1c_rss_ipv4;
+ hw->rss_mode = atl1c_rss_mul_que_mul_int;
+ hw->rss_hash_bits = 16;
+ }
+ hw->autoneg_advertised = ADVERTISED_Autoneg;
+ hw->indirect_tab = 0xE4E4E4E4;
+ hw->base_cpu = 0;
+
+ hw->ict = 50000; /* 100ms */
+ hw->smb_timer = 200000; /* 400ms */
+ hw->cmb_tpd = 4;
+ hw->cmb_tx_timer = 1; /* 2 us */
+ hw->rx_imt = 200;
+ hw->tx_imt = 1000;
+
+ hw->tpd_burst = 5;
+ hw->rfd_burst = 8;
+ hw->dma_order = atl1c_dma_ord_out;
+ hw->dmar_block = atl1c_dma_req_1024;
+ hw->dmaw_block = atl1c_dma_req_1024;
+ hw->dmar_dly_cnt = 15;
+ hw->dmaw_dly_cnt = 4;
+
+ if (atl1c_alloc_queues(adapter)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+ /* TODO */
+ atl1c_set_rxbufsize(adapter, adapter->netdev);
+ atomic_set(&adapter->irq_sem, 1);
+ spin_lock_init(&adapter->mdio_lock);
+ spin_lock_init(&adapter->tx_lock);
+ set_bit(__AT_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/*
+ * atl1c_clean_tx_ring - Free Tx-skb
+ * @adapter: board private structure
+ */
+static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter,
+ enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+ struct atl1c_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ u16 index, ring_count;
+
+ ring_count = tpd_ring->count;
+ for (index = 0; index < ring_count; index++) {
+ buffer_info = &tpd_ring->buffer_info[index];
+ if (buffer_info->state == ATL1_BUFFER_FREE)
+ continue;
+ if (buffer_info->dma)
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->dma = 0;
+ buffer_info->skb = NULL;
+ buffer_info->state = ATL1_BUFFER_FREE;
+ }
+
+ /* Zero out Tx-buffers */
+ memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) *
+ ring_count);
+ atomic_set(&tpd_ring->next_to_clean, 0);
+ tpd_ring->next_to_use = 0;
+}
+
+/*
+ * atl1c_clean_rx_ring - Free rx-reservation skbs
+ * @adapter: board private structure
+ */
+static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter)
+{
+ struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+ struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+ struct atl1c_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ for (j = 0; j < rfd_ring[i].count; j++) {
+ buffer_info = &rfd_ring[i].buffer_info[j];
+ if (buffer_info->state == ATL1_BUFFER_FREE)
+ continue;
+ if (buffer_info->dma)
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->state = ATL1_BUFFER_FREE;
+ buffer_info->skb = NULL;
+ }
+ /* zero out the descriptor ring */
+ memset(rfd_ring[i].desc, 0, rfd_ring[i].size);
+ rfd_ring[i].next_to_clean = 0;
+ rfd_ring[i].next_to_use = 0;
+ rrd_ring[i].next_to_use = 0;
+ rrd_ring[i].next_to_clean = 0;
+ }
+}
+
+/*
+ * Read / Write Ptr Initialize:
+ */
+static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter)
+{
+ struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+ struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+ struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+ struct atl1c_buffer *buffer_info;
+ int i, j;
+
+ for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+ tpd_ring[i].next_to_use = 0;
+ atomic_set(&tpd_ring[i].next_to_clean, 0);
+ buffer_info = tpd_ring[i].buffer_info;
+ for (j = 0; j < tpd_ring->count; j++)
+ buffer_info[i].state = ATL1_BUFFER_FREE;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rfd_ring[i].next_to_use = 0;
+ rfd_ring[i].next_to_clean = 0;
+ rrd_ring[i].next_to_use = 0;
+ rrd_ring[i].next_to_clean = 0;
+ for (j = 0; j < rfd_ring[i].count; j++) {
+ buffer_info = &rfd_ring[i].buffer_info[j];
+ buffer_info->state = ATL1_BUFFER_FREE;
+ }
+ }
+}
+
+/*
+ * atl1c_free_ring_resources - Free Tx / RX descriptor Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ */
+static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_free_consistent(pdev, adapter->ring_header.size,
+ adapter->ring_header.desc,
+ adapter->ring_header.dma);
+ adapter->ring_header.desc = NULL;
+
+ /* Note: just free tdp_ring.buffer_info,
+ * it contain rfd_ring.buffer_info, do not double free */
+ if (adapter->tpd_ring[0].buffer_info) {
+ kfree(adapter->tpd_ring[0].buffer_info);
+ adapter->tpd_ring[0].buffer_info = NULL;
+ }
+}
+
+/*
+ * atl1c_setup_mem_resources - allocate Tx / RX descriptor resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ */
+static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+ struct atl1c_rfd_ring *rfd_ring = adapter->rfd_ring;
+ struct atl1c_rrd_ring *rrd_ring = adapter->rrd_ring;
+ struct atl1c_ring_header *ring_header = &adapter->ring_header;
+ int num_rx_queues = adapter->num_rx_queues;
+ int size;
+ int i;
+ int count = 0;
+ int rx_desc_count = 0;
+ u32 offset = 0;
+
+ rrd_ring[0].count = rfd_ring[0].count;
+ for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++)
+ tpd_ring[i].count = tpd_ring[0].count;
+
+ for (i = 1; i < adapter->num_rx_queues; i++)
+ rfd_ring[i].count = rrd_ring[i].count = rfd_ring[0].count;
+
+ /* 2 tpd queue, one high priority queue,
+ * another normal priority queue */
+ size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 +
+ rfd_ring->count * num_rx_queues);
+ tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
+ if (unlikely(!tpd_ring->buffer_info)) {
+ dev_err(&pdev->dev, "kzalloc failed, size = %d\n",
+ size);
+ goto err_nomem;
+ }
+ for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+ tpd_ring[i].buffer_info =
+ (struct atl1c_buffer *) (tpd_ring->buffer_info + count);
+ count += tpd_ring[i].count;
+ }
+
+ for (i = 0; i < num_rx_queues; i++) {
+ rfd_ring[i].buffer_info =
+ (struct atl1c_buffer *) (tpd_ring->buffer_info + count);
+ count += rfd_ring[i].count;
+ rx_desc_count += rfd_ring[i].count;
+ }
+ /*
+ * real ring DMA buffer
+ * each ring/block may need up to 8 bytes for alignment, hence the
+ * additional bytes tacked onto the end.
+ */
+ ring_header->size = size =
+ sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 +
+ sizeof(struct atl1c_rx_free_desc) * rx_desc_count +
+ sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
+ sizeof(struct atl1c_hw_stats) +
+ 8 * 4 + 8 * 2 * num_rx_queues;
+
+ ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
+ &ring_header->dma);
+ if (unlikely(!ring_header->desc)) {
+ dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
+ goto err_nomem;
+ }
+ memset(ring_header->desc, 0, ring_header->size);
+ /* init TPD ring */
+
+ tpd_ring[0].dma = roundup(ring_header->dma, 8);
+ offset = tpd_ring[0].dma - ring_header->dma;
+ for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
+ tpd_ring[i].dma = ring_header->dma + offset;
+ tpd_ring[i].desc = (u8 *) ring_header->desc + offset;
+ tpd_ring[i].size =
+ sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count;
+ offset += roundup(tpd_ring[i].size, 8);
+ }
+ /* init RFD ring */
+ for (i = 0; i < num_rx_queues; i++) {
+ rfd_ring[i].dma = ring_header->dma + offset;
+ rfd_ring[i].desc = (u8 *) ring_header->desc + offset;
+ rfd_ring[i].size = sizeof(struct atl1c_rx_free_desc) *
+ rfd_ring[i].count;
+ offset += roundup(rfd_ring[i].size, 8);
+ }
+
+ /* init RRD ring */
+ for (i = 0; i < num_rx_queues; i++) {
+ rrd_ring[i].dma = ring_header->dma + offset;
+ rrd_ring[i].desc = (u8 *) ring_header->desc + offset;
+ rrd_ring[i].size = sizeof(struct atl1c_recv_ret_status) *
+ rrd_ring[i].count;
+ offset += roundup(rrd_ring[i].size, 8);
+ }
+
+ adapter->smb.dma = ring_header->dma + offset;
+ adapter->smb.smb = (u8 *)ring_header->desc + offset;
+ return 0;
+
+err_nomem:
+ kfree(tpd_ring->buffer_info);
+ return -ENOMEM;
+}
+
+static void atl1c_configure_des_ring(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ struct atl1c_rfd_ring *rfd_ring = (struct atl1c_rfd_ring *)
+ adapter->rfd_ring;
+ struct atl1c_rrd_ring *rrd_ring = (struct atl1c_rrd_ring *)
+ adapter->rrd_ring;
+ struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
+ adapter->tpd_ring;
+ struct atl1c_cmb *cmb = (struct atl1c_cmb *) &adapter->cmb;
+ struct atl1c_smb *smb = (struct atl1c_smb *) &adapter->smb;
+ int i;
+
+ /* TPD */
+ AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI,
+ (u32)((tpd_ring[atl1c_trans_normal].dma &
+ AT_DMA_HI_ADDR_MASK) >> 32));
+ /* just enable normal priority TX queue */
+ AT_WRITE_REG(hw, REG_NTPD_HEAD_ADDR_LO,
+ (u32)(tpd_ring[atl1c_trans_normal].dma &
+ AT_DMA_LO_ADDR_MASK));
+ AT_WRITE_REG(hw, REG_HTPD_HEAD_ADDR_LO,
+ (u32)(tpd_ring[atl1c_trans_high].dma &
+ AT_DMA_LO_ADDR_MASK));
+ AT_WRITE_REG(hw, REG_TPD_RING_SIZE,
+ (u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK));
+
+
+ /* RFD */
+ AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI,
+ (u32)((rfd_ring[0].dma & AT_DMA_HI_ADDR_MASK) >> 32));
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ AT_WRITE_REG(hw, atl1c_rfd_addr_lo_regs[i],
+ (u32)(rfd_ring[i].dma & AT_DMA_LO_ADDR_MASK));
+
+ AT_WRITE_REG(hw, REG_RFD_RING_SIZE,
+ rfd_ring[0].count & RFD_RING_SIZE_MASK);
+ AT_WRITE_REG(hw, REG_RX_BUF_SIZE,
+ adapter->rx_buffer_len & RX_BUF_SIZE_MASK);
+
+ /* RRD */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ AT_WRITE_REG(hw, atl1c_rrd_addr_lo_regs[i],
+ (u32)(rrd_ring[i].dma & AT_DMA_LO_ADDR_MASK));
+ AT_WRITE_REG(hw, REG_RRD_RING_SIZE,
+ (rrd_ring[0].count & RRD_RING_SIZE_MASK));
+
+ /* CMB */
+ AT_WRITE_REG(hw, REG_CMB_BASE_ADDR_LO, cmb->dma & AT_DMA_LO_ADDR_MASK);
+
+ /* SMB */
+ AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_HI,
+ (u32)((smb->dma & AT_DMA_HI_ADDR_MASK) >> 32));
+ AT_WRITE_REG(hw, REG_SMB_BASE_ADDR_LO,
+ (u32)(smb->dma & AT_DMA_LO_ADDR_MASK));
+ /* Load all of base address above */
+ AT_WRITE_REG(hw, REG_LOAD_PTR, 1);
+}
+
+static void atl1c_configure_tx(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 dev_ctrl_data;
+ u32 max_pay_load;
+ u16 tx_offload_thresh;
+ u32 txq_ctrl_data;
+ u32 extra_size = 0; /* Jumbo frame threshold in QWORD unit */
+
+ extra_size = ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
+ tx_offload_thresh = MAX_TX_OFFLOAD_THRESH;
+ AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
+ (tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
+ AT_READ_REG(hw, REG_DEVICE_CTRL, &dev_ctrl_data);
+ max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_PAYLOAD_SHIFT) &
+ DEVICE_CTRL_MAX_PAYLOAD_MASK;
+ hw->dmaw_block = min(max_pay_load, hw->dmaw_block);
+ max_pay_load = (dev_ctrl_data >> DEVICE_CTRL_MAX_RREQ_SZ_SHIFT) &
+ DEVICE_CTRL_MAX_RREQ_SZ_MASK;
+ hw->dmar_block = min(max_pay_load, hw->dmar_block);
+
+ txq_ctrl_data = (hw->tpd_burst & TXQ_NUM_TPD_BURST_MASK) <<
+ TXQ_NUM_TPD_BURST_SHIFT;
+ if (hw->ctrl_flags & ATL1C_TXQ_MODE_ENHANCE)
+ txq_ctrl_data |= TXQ_CTRL_ENH_MODE;
+ txq_ctrl_data |= (atl1c_pay_load_size[hw->dmar_block] &
+ TXQ_TXF_BURST_NUM_MASK) << TXQ_TXF_BURST_NUM_SHIFT;
+
+ AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data);
+}
+
+static void atl1c_configure_rx(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 rxq_ctrl_data;
+
+ rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) <<
+ RXQ_RFD_BURST_NUM_SHIFT;
+
+ if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM)
+ rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN;
+ if (hw->rss_type == atl1c_rss_ipv4)
+ rxq_ctrl_data |= RSS_HASH_IPV4;
+ if (hw->rss_type == atl1c_rss_ipv4_tcp)
+ rxq_ctrl_data |= RSS_HASH_IPV4_TCP;
+ if (hw->rss_type == atl1c_rss_ipv6)
+ rxq_ctrl_data |= RSS_HASH_IPV6;
+ if (hw->rss_type == atl1c_rss_ipv6_tcp)
+ rxq_ctrl_data |= RSS_HASH_IPV6_TCP;
+ if (hw->rss_type != atl1c_rss_disable)
+ rxq_ctrl_data |= RRS_HASH_CTRL_EN;
+
+ rxq_ctrl_data |= (hw->rss_mode & RSS_MODE_MASK) <<
+ RSS_MODE_SHIFT;
+ rxq_ctrl_data |= (hw->rss_hash_bits & RSS_HASH_BITS_MASK) <<
+ RSS_HASH_BITS_SHIFT;
+ if (hw->ctrl_flags & ATL1C_ASPM_CTRL_MON)
+ rxq_ctrl_data |= (ASPM_THRUPUT_LIMIT_100M &
+ ASPM_THRUPUT_LIMIT_MASK) << ASPM_THRUPUT_LIMIT_SHIFT;
+
+ AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data);
+}
+
+static void atl1c_configure_rss(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+
+ AT_WRITE_REG(hw, REG_IDT_TABLE, hw->indirect_tab);
+ AT_WRITE_REG(hw, REG_BASE_CPU_NUMBER, hw->base_cpu);
+}
+
+static void atl1c_configure_dma(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 dma_ctrl_data;
+
+ dma_ctrl_data = DMA_CTRL_DMAR_REQ_PRI;
+ if (hw->ctrl_flags & ATL1C_CMB_ENABLE)
+ dma_ctrl_data |= DMA_CTRL_CMB_EN;
+ if (hw->ctrl_flags & ATL1C_SMB_ENABLE)
+ dma_ctrl_data |= DMA_CTRL_SMB_EN;
+ else
+ dma_ctrl_data |= MAC_CTRL_SMB_DIS;
+
+ switch (hw->dma_order) {
+ case atl1c_dma_ord_in:
+ dma_ctrl_data |= DMA_CTRL_DMAR_IN_ORDER;
+ break;
+ case atl1c_dma_ord_enh:
+ dma_ctrl_data |= DMA_CTRL_DMAR_ENH_ORDER;
+ break;
+ case atl1c_dma_ord_out:
+ dma_ctrl_data |= DMA_CTRL_DMAR_OUT_ORDER;
+ break;
+ default:
+ break;
+ }
+
+ dma_ctrl_data |= (((u32)hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
+ << DMA_CTRL_DMAR_BURST_LEN_SHIFT;
+ dma_ctrl_data |= (((u32)hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
+ << DMA_CTRL_DMAW_BURST_LEN_SHIFT;
+ dma_ctrl_data |= (((u32)hw->dmar_dly_cnt) & DMA_CTRL_DMAR_DLY_CNT_MASK)
+ << DMA_CTRL_DMAR_DLY_CNT_SHIFT;
+ dma_ctrl_data |= (((u32)hw->dmaw_dly_cnt) & DMA_CTRL_DMAW_DLY_CNT_MASK)
+ << DMA_CTRL_DMAW_DLY_CNT_SHIFT;
+
+ AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data);
+}
+
+/*
+ * Stop the mac, transmit and receive units
+ * hw - Struct containing variables accessed by shared code
+ * return : 0 or idle status (if error)
+ */
+static int atl1c_stop_mac(struct atl1c_hw *hw)
+{
+ u32 data;
+ int timeout;
+
+ AT_READ_REG(hw, REG_RXQ_CTRL, &data);
+ data &= ~(RXQ1_CTRL_EN | RXQ2_CTRL_EN |
+ RXQ3_CTRL_EN | RXQ_CTRL_EN);
+ AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
+
+ AT_READ_REG(hw, REG_TXQ_CTRL, &data);
+ data &= ~TXQ_CTRL_EN;
+ AT_WRITE_REG(hw, REG_TWSI_CTRL, data);
+
+ for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+ AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+ if ((data & (IDLE_STATUS_RXQ_NO_IDLE |
+ IDLE_STATUS_TXQ_NO_IDLE)) == 0)
+ break;
+ msleep(1);
+ }
+
+ AT_READ_REG(hw, REG_MAC_CTRL, &data);
+ data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
+ AT_WRITE_REG(hw, REG_MAC_CTRL, data);
+
+ for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+ AT_READ_REG(hw, REG_IDLE_STATUS, &data);
+ if ((data & IDLE_STATUS_MASK) == 0)
+ return 0;
+ msleep(1);
+ }
+ return data;
+}
+
+static void atl1c_enable_rx_ctrl(struct atl1c_hw *hw)
+{
+ u32 data;
+
+ AT_READ_REG(hw, REG_RXQ_CTRL, &data);
+ switch (hw->adapter->num_rx_queues) {
+ case 4:
+ data |= (RXQ3_CTRL_EN | RXQ2_CTRL_EN | RXQ1_CTRL_EN);
+ break;
+ case 3:
+ data |= (RXQ2_CTRL_EN | RXQ1_CTRL_EN);
+ break;
+ case 2:
+ data |= RXQ1_CTRL_EN;
+ break;
+ default:
+ break;
+ }
+ data |= RXQ_CTRL_EN;
+ AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
+}
+
+static void atl1c_enable_tx_ctrl(struct atl1c_hw *hw)
+{
+ u32 data;
+
+ AT_READ_REG(hw, REG_TXQ_CTRL, &data);
+ data |= TXQ_CTRL_EN;
+ AT_WRITE_REG(hw, REG_TXQ_CTRL, data);
+}
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ * hw - Struct containing variables accessed by shared code
+ * return : 0 or idle status (if error)
+ */
+static int atl1c_reset_mac(struct atl1c_hw *hw)
+{
+ struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 idle_status_data = 0;
+ int timeout = 0;
+ int ret;
+
+ AT_WRITE_REG(hw, REG_IMR, 0);
+ AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT);
+
+ ret = atl1c_stop_mac(hw);
+ if (ret)
+ return ret;
+ /*
+ * Issue Soft Reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ AT_WRITE_REGW(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
+ AT_WRITE_FLUSH(hw);
+ msleep(10);
+ /* Wait at least 10ms for All module to be Idle */
+ for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
+ AT_READ_REG(hw, REG_IDLE_STATUS, &idle_status_data);
+ if ((idle_status_data & IDLE_STATUS_MASK) == 0)
+ break;
+ msleep(1);
+ }
+ if (timeout >= AT_HW_MAX_IDLE_DELAY) {
+ dev_err(&pdev->dev,
+ "MAC state machine cann't be idle since"
+ " disabled for 10ms second\n");
+ return -1;
+ }
+ return 0;
+}
+
+static void atl1c_disable_l0s_l1(struct atl1c_hw *hw)
+{
+ u32 pm_ctrl_data;
+
+ AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
+ pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
+ PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+ pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+ pm_ctrl_data &= ~PM_CTRL_MAC_ASPM_CHK;
+ pm_ctrl_data &= ~PM_CTRL_SERDES_PD_EX_L1;
+
+ pm_ctrl_data |= PM_CTRL_SERDES_BUDS_RX_L1_EN;
+ pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
+ pm_ctrl_data |= PM_CTRL_SERDES_L1_EN;
+ AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data);
+}
+
+/*
+ * Set ASPM state.
+ * Enable/disable L0s/L1 depend on link state.
+ */
+static void atl1c_set_aspm(struct atl1c_hw *hw, bool linkup)
+{
+ u32 pm_ctrl_data;
+
+ AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
+
+ pm_ctrl_data &= PM_CTRL_SERDES_PD_EX_L1;
+ pm_ctrl_data |= ~PM_CTRL_SERDES_BUDS_RX_L1_EN;
+ pm_ctrl_data |= ~PM_CTRL_SERDES_L1_EN;
+ pm_ctrl_data &= ~(PM_CTRL_L1_ENTRY_TIMER_MASK <<
+ PM_CTRL_L1_ENTRY_TIMER_SHIFT);
+
+ pm_ctrl_data |= PM_CTRL_MAC_ASPM_CHK;
+
+ if (linkup) {
+ pm_ctrl_data |= PM_CTRL_SERDES_PLL_L1_EN;
+ pm_ctrl_data &= ~PM_CTRL_CLK_SWH_L1;
+
+ if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT) {
+ pm_ctrl_data |= AT_ASPM_L1_TIMER <<
+ PM_CTRL_L1_ENTRY_TIMER_SHIFT;
+ pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
+ } else
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+
+ if (hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT)
+ pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN;
+ else
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+
+ } else {
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
+ pm_ctrl_data &= ~PM_CTRL_SERDES_PLL_L1_EN;
+
+ pm_ctrl_data |= PM_CTRL_CLK_SWH_L1;
+
+ if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT)
+ pm_ctrl_data |= PM_CTRL_ASPM_L1_EN;
+ else
+ pm_ctrl_data &= ~PM_CTRL_ASPM_L1_EN;
+ }
+
+ AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data);
+}
+
+static void atl1c_setup_mac_ctrl(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 mac_ctrl_data;
+
+ mac_ctrl_data = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
+ mac_ctrl_data |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
+
+ if (adapter->link_duplex == FULL_DUPLEX) {
+ hw->mac_duplex = true;
+ mac_ctrl_data |= MAC_CTRL_DUPLX;
+ }
+
+ if (adapter->link_speed == SPEED_1000)
+ hw->mac_speed = atl1c_mac_speed_1000;
+ else
+ hw->mac_speed = atl1c_mac_speed_10_100;
+
+ mac_ctrl_data |= (hw->mac_speed & MAC_CTRL_SPEED_MASK) <<
+ MAC_CTRL_SPEED_SHIFT;
+
+ mac_ctrl_data |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+ mac_ctrl_data |= ((hw->preamble_len & MAC_CTRL_PRMLEN_MASK) <<
+ MAC_CTRL_PRMLEN_SHIFT);
+
+ if (adapter->vlgrp)
+ mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+
+ mac_ctrl_data |= MAC_CTRL_BC_EN;
+ if (netdev->flags & IFF_PROMISC)
+ mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
+ if (netdev->flags & IFF_ALLMULTI)
+ mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
+
+ mac_ctrl_data |= MAC_CTRL_SINGLE_PAUSE_EN;
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+}
+
+/*
+ * atl1c_configure - Configure Transmit&Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx /Rx unit of the MAC after a reset.
+ */
+static int atl1c_configure(struct atl1c_adapter *adapter)
+{
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 master_ctrl_data = 0;
+ u32 intr_modrt_data;
+
+ /* clear interrupt status */
+ AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF);
+ /* Clear any WOL status */
+ AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+ /* set Interrupt Clear Timer
+ * HW will enable self to assert interrupt event to system after
+ * waiting x-time for software to notify it accept interrupt.
+ */
+ AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER,
+ hw->ict & INT_RETRIG_TIMER_MASK);
+
+ atl1c_configure_des_ring(adapter);
+
+ if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) {
+ intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) <<
+ IRQ_MODRT_TX_TIMER_SHIFT;
+ intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) <<
+ IRQ_MODRT_RX_TIMER_SHIFT;
+ AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
+ master_ctrl_data |=
+ MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN;
+ }
+
+ if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ)
+ master_ctrl_data |= MASTER_CTRL_INT_RDCLR;
+
+ AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+
+ if (hw->ctrl_flags & ATL1C_CMB_ENABLE) {
+ AT_WRITE_REG(hw, REG_CMB_TPD_THRESH,
+ hw->cmb_tpd & CMB_TPD_THRESH_MASK);
+ AT_WRITE_REG(hw, REG_CMB_TX_TIMER,
+ hw->cmb_tx_timer & CMB_TX_TIMER_MASK);
+ }
+
+ if (hw->ctrl_flags & ATL1C_SMB_ENABLE)
+ AT_WRITE_REG(hw, REG_SMB_STAT_TIMER,
+ hw->smb_timer & SMB_STAT_TIMER_MASK);
+ /* set MTU */
+ AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN +
+ VLAN_HLEN + ETH_FCS_LEN);
+ /* HDS, disable */
+ AT_WRITE_REG(hw, REG_HDS_CTRL, 0);
+
+ atl1c_configure_tx(adapter);
+ atl1c_configure_rx(adapter);
+ atl1c_configure_rss(adapter);
+ atl1c_configure_dma(adapter);
+
+ return 0;
+}
+
+static void atl1c_update_hw_stats(struct atl1c_adapter *adapter)
+{
+ u16 hw_reg_addr = 0;
+ unsigned long *stats_item = NULL;
+ u32 data;
+
+ /* update rx status */
+ hw_reg_addr = REG_MAC_RX_STATUS_BIN;
+ stats_item = &adapter->hw_stats.rx_ok;
+ while (hw_reg_addr <= REG_MAC_RX_STATUS_END) {
+ AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
+ *stats_item += data;
+ stats_item++;
+ hw_reg_addr += 4;
+ }
+/* update tx status */
+ hw_reg_addr = REG_MAC_TX_STATUS_BIN;
+ stats_item = &adapter->hw_stats.tx_ok;
+ while (hw_reg_addr <= REG_MAC_TX_STATUS_END) {
+ AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
+ *stats_item += data;
+ stats_item++;
+ hw_reg_addr += 4;
+ }
+}
+
+/*
+ * atl1c_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atl1c_get_stats(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw_stats *hw_stats = &adapter->hw_stats;
+ struct net_device_stats *net_stats = &adapter->net_stats;
+
+ atl1c_update_hw_stats(adapter);
+ net_stats->rx_packets = hw_stats->rx_ok;
+ net_stats->tx_packets = hw_stats->tx_ok;
+ net_stats->rx_bytes = hw_stats->rx_byte_cnt;
+ net_stats->tx_bytes = hw_stats->tx_byte_cnt;
+ net_stats->multicast = hw_stats->rx_mcast;
+ net_stats->collisions = hw_stats->tx_1_col +
+ hw_stats->tx_2_col * 2 +
+ hw_stats->tx_late_col + hw_stats->tx_abort_col;
+ net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err +
+ hw_stats->rx_len_err + hw_stats->rx_sz_ov +
+ hw_stats->rx_rrd_ov + hw_stats->rx_align_err;
+ net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov;
+ net_stats->rx_length_errors = hw_stats->rx_len_err;
+ net_stats->rx_crc_errors = hw_stats->rx_fcs_err;
+ net_stats->rx_frame_errors = hw_stats->rx_align_err;
+ net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+
+ net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
+
+ net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col +
+ hw_stats->tx_underrun + hw_stats->tx_trunc;
+ net_stats->tx_fifo_errors = hw_stats->tx_underrun;
+ net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
+ net_stats->tx_window_errors = hw_stats->tx_late_col;
+
+ return &adapter->net_stats;
+}
+
+static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter)
+{
+ u16 phy_data;
+
+ spin_lock(&adapter->mdio_lock);
+ atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data);
+ spin_unlock(&adapter->mdio_lock);
+}
+
+static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter,
+ enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
+ &adapter->tpd_ring[type];
+ struct atl1c_buffer *buffer_info;
+ u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
+ u16 hw_next_to_clean;
+ u16 shift;
+ u32 data;
+
+ if (type == atl1c_trans_high)
+ shift = MB_HTPD_CONS_IDX_SHIFT;
+ else
+ shift = MB_NTPD_CONS_IDX_SHIFT;
+
+ AT_READ_REG(&adapter->hw, REG_MB_PRIO_CONS_IDX, &data);
+ hw_next_to_clean = (data >> shift) & MB_PRIO_PROD_IDX_MASK;
+
+ while (next_to_clean != hw_next_to_clean) {
+ buffer_info = &tpd_ring->buffer_info[next_to_clean];
+ if (buffer_info->state == ATL1_BUFFER_BUSY) {
+ pci_unmap_page(adapter->pdev, buffer_info->dma,
+ buffer_info->length, PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
+ if (buffer_info->skb) {
+ dev_kfree_skb_irq(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->state = ATL1_BUFFER_FREE;
+ }
+ if (++next_to_clean == tpd_ring->count)
+ next_to_clean = 0;
+ atomic_set(&tpd_ring->next_to_clean, next_to_clean);
+ }
+
+ if (netif_queue_stopped(adapter->netdev) &&
+ netif_carrier_ok(adapter->netdev)) {
+ netif_wake_queue(adapter->netdev);
+ }
+
+ return true;
+}
+
+/*
+ * atl1c_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ * @pt_regs: CPU registers structure
+ */
+static irqreturn_t atl1c_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct atl1c_hw *hw = &adapter->hw;
+ int max_ints = AT_MAX_INT_WORK;
+ int handled = IRQ_NONE;
+ u32 status;
+ u32 reg_data;
+
+ do {
+ AT_READ_REG(hw, REG_ISR, ®_data);
+ status = reg_data & hw->intr_mask;
+
+ if (status == 0 || (status & ISR_DIS_INT) != 0) {
+ if (max_ints != AT_MAX_INT_WORK)
+ handled = IRQ_HANDLED;
+ break;
+ }
+ /* link event */
+ if (status & ISR_GPHY)
+ atl1c_clear_phy_int(adapter);
+ /* Ack ISR */
+ AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
+ if (status & ISR_RX_PKT) {
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ hw->intr_mask &= ~ISR_RX_PKT;
+ AT_WRITE_REG(hw, REG_IMR, hw->intr_mask);
+ __napi_schedule(&adapter->napi);
+ }
+ }
+ if (status & ISR_TX_PKT)
+ atl1c_clean_tx_irq(adapter, atl1c_trans_normal);
+
+ handled = IRQ_HANDLED;
+ /* check if PCIE PHY Link down */
+ if (status & ISR_ERROR) {
+ if (netif_msg_hw(adapter))
+ dev_err(&pdev->dev,
+ "atl1c hardware error (status = 0x%x)\n",
+ status & ISR_ERROR);
+ /* reset MAC */
+ hw->intr_mask &= ~ISR_ERROR;
+ AT_WRITE_REG(hw, REG_IMR, hw->intr_mask);
+ schedule_work(&adapter->reset_task);
+ break;
+ }
+
+ if (status & ISR_OVER)
+ if (netif_msg_intr(adapter))
+ dev_warn(&pdev->dev,
+ "TX/RX over flow (status = 0x%x)\n",
+ status & ISR_OVER);
+
+ /* link event */
+ if (status & (ISR_GPHY | ISR_MANUAL)) {
+ adapter->net_stats.tx_carrier_errors++;
+ atl1c_link_chg_event(adapter);
+ break;
+ }
+
+ } while (--max_ints > 0);
+ /* re-enable Interrupt*/
+ AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
+ return handled;
+}
+
+static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter,
+ struct sk_buff *skb, struct atl1c_recv_ret_status *prrs)
+{
+ /*
+ * The pid field in RRS in not correct sometimes, so we
+ * cannot figure out if the packet is fragmented or not,
+ * so we tell the KERNEL CHECKSUM_NONE
+ */
+ skb->ip_summed = CHECKSUM_NONE;
+}
+
+static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter, const int ringid)
+{
+ struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[ringid];
+ struct pci_dev *pdev = adapter->pdev;
+ struct atl1c_buffer *buffer_info, *next_info;
+ struct sk_buff *skb;
+ void *vir_addr = NULL;
+ u16 num_alloc = 0;
+ u16 rfd_next_to_use, next_next;
+ struct atl1c_rx_free_desc *rfd_desc;
+
+ next_next = rfd_next_to_use = rfd_ring->next_to_use;
+ if (++next_next == rfd_ring->count)
+ next_next = 0;
+ buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
+ next_info = &rfd_ring->buffer_info[next_next];
+
+ while (next_info->state == ATL1_BUFFER_FREE) {
+ rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
+
+ skb = dev_alloc_skb(adapter->rx_buffer_len);
+ if (unlikely(!skb)) {
+ if (netif_msg_rx_err(adapter))
+ dev_warn(&pdev->dev, "alloc rx buffer failed\n");
+ break;
+ }
+
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ vir_addr = skb->data;
+ buffer_info->state = ATL1_BUFFER_BUSY;
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+ buffer_info->dma = pci_map_single(pdev, vir_addr,
+ buffer_info->length,
+ PCI_DMA_FROMDEVICE);
+ rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ rfd_next_to_use = next_next;
+ if (++next_next == rfd_ring->count)
+ next_next = 0;
+ buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
+ next_info = &rfd_ring->buffer_info[next_next];
+ num_alloc++;
+ }
+
+ if (num_alloc) {
+ /* TODO: update mailbox here */
+ wmb();
+ rfd_ring->next_to_use = rfd_next_to_use;
+ AT_WRITE_REG(&adapter->hw, atl1c_rfd_prod_idx_regs[ringid],
+ rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK);
+ }
+
+ return num_alloc;
+}
+
+static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring,
+ struct atl1c_recv_ret_status *rrs, u16 num)
+{
+ u16 i;
+ /* the relationship between rrd and rfd is one map one */
+ for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring,
+ rrd_ring->next_to_clean)) {
+ rrs->word3 &= ~RRS_RXD_UPDATED;
+ if (++rrd_ring->next_to_clean == rrd_ring->count)
+ rrd_ring->next_to_clean = 0;
+ }
+}
+
+static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring,
+ struct atl1c_recv_ret_status *rrs, u16 num)
+{
+ u16 i;
+ u16 rfd_index;
+ struct atl1c_buffer *buffer_info = rfd_ring->buffer_info;
+
+ rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
+ RRS_RX_RFD_INDEX_MASK;
+ for (i = 0; i < num; i++) {
+ buffer_info[rfd_index].skb = NULL;
+ buffer_info[rfd_index].state = ATL1_BUFFER_FREE;
+ if (++rfd_index == rfd_ring->count)
+ rfd_index = 0;
+ }
+ rfd_ring->next_to_clean = rfd_index;
+}
+
+static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
+ int *work_done, int work_to_do)
+{
+ u16 rfd_num, rfd_index;
+ u16 count = 0;
+ u16 length;
+ struct pci_dev *pdev = adapter->pdev;
+ struct net_device *netdev = adapter->netdev;
+ struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring[que];
+ struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring[que];
+ struct sk_buff *skb;
+ struct atl1c_recv_ret_status *rrs;
+ struct atl1c_buffer *buffer_info;
+
+ while (1) {
+ if (*work_done >= work_to_do)
+ break;
+ rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean);
+ if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
+ rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
+ RRS_RX_RFD_CNT_MASK;
+ if (unlikely(rfd_num) != 1)
+ /* TODO support mul rfd*/
+ if (netif_msg_rx_err(adapter))
+ dev_warn(&pdev->dev,
+ "Multi rfd not support yet!\n");
+ goto rrs_checked;
+ } else {
+ break;
+ }
+rrs_checked:
+ atl1c_clean_rrd(rrd_ring, rrs, rfd_num);
+ if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) {
+ atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
+ if (netif_msg_rx_err(adapter))
+ dev_warn(&pdev->dev,
+ "wrong packet! rrs word3 is %x\n",
+ rrs->word3);
+ continue;
+ }
+
+ length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) &
+ RRS_PKT_SIZE_MASK);
+ /* Good Receive */
+ if (likely(rfd_num == 1)) {
+ rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
+ RRS_RX_RFD_INDEX_MASK;
+ buffer_info = &rfd_ring->buffer_info[rfd_index];
+ pci_unmap_single(pdev, buffer_info->dma,
+ buffer_info->length, PCI_DMA_FROMDEVICE);
+ skb = buffer_info->skb;
+ } else {
+ /* TODO */
+ if (netif_msg_rx_err(adapter))
+ dev_warn(&pdev->dev,
+ "Multi rfd not support yet!\n");
+ break;
+ }
+ atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
+ skb_put(skb, length - ETH_FCS_LEN);
+ skb->protocol = eth_type_trans(skb, netdev);
+ skb->dev = netdev;
+ atl1c_rx_checksum(adapter, skb, rrs);
+ if (unlikely(adapter->vlgrp) && rrs->word3 & RRS_VLAN_INS) {
+ u16 vlan;
+
+ AT_TAG_TO_VLAN(rrs->vlan_tag, vlan);
+ vlan = le16_to_cpu(vlan);
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp, vlan);
+ } else
+ netif_receive_skb(skb);
+
+ netdev->last_rx = jiffies;
+ (*work_done)++;
+ count++;
+ }
+ if (count)
+ atl1c_alloc_rx_buffer(adapter, que);
+}
+
+/*
+ * atl1c_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ */
+static int atl1c_clean(struct napi_struct *napi, int budget)
+{
+ struct atl1c_adapter *adapter =
+ container_of(napi, struct atl1c_adapter, napi);
+ int work_done = 0;
+
+ /* Keep link state information with original netdev */
+ if (!netif_carrier_ok(adapter->netdev))
+ goto quit_polling;
+ /* just enable one RXQ */
+ atl1c_clean_rx_irq(adapter, 0, &work_done, budget);
+
+ if (work_done < budget) {
+quit_polling:
+ napi_complete(napi);
+ adapter->hw.intr_mask |= ISR_RX_PKT;
+ AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
+ }
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void atl1c_netpoll(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ atl1c_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+ u16 next_to_use = 0;
+ u16 next_to_clean = 0;
+
+ next_to_clean = atomic_read(&tpd_ring->next_to_clean);
+ next_to_use = tpd_ring->next_to_use;
+
+ return (u16)(next_to_clean > next_to_use) ?
+ (next_to_clean - next_to_use - 1) :
+ (tpd_ring->count + next_to_clean - next_to_use - 1);
+}
+
+/*
+ * get next usable tpd
+ * Note: should call atl1c_tdp_avail to make sure
+ * there is enough tpd to use
+ */
+static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter,
+ enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+ struct atl1c_tpd_desc *tpd_desc;
+ u16 next_to_use = 0;
+
+ next_to_use = tpd_ring->next_to_use;
+ if (++tpd_ring->next_to_use == tpd_ring->count)
+ tpd_ring->next_to_use = 0;
+ tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use);
+ memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc));
+ return tpd_desc;
+}
+
+static struct atl1c_buffer *
+atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd)
+{
+ struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
+
+ return &tpd_ring->buffer_info[tpd -
+ (struct atl1c_tpd_desc *)tpd_ring->desc];
+}
+
+/* Calculate the transmit packet descript needed*/
+static u16 atl1c_cal_tpd_req(const struct sk_buff *skb)
+{
+ u16 tpd_req;
+ u16 proto_hdr_len = 0;
+
+ tpd_req = skb_shinfo(skb)->nr_frags + 1;
+
+ if (skb_is_gso(skb)) {
+ proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (proto_hdr_len < skb_headlen(skb))
+ tpd_req++;
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
+ tpd_req++;
+ }
+ return tpd_req;
+}
+
+static int atl1c_tso_csum(struct atl1c_adapter *adapter,
+ struct sk_buff *skb,
+ struct atl1c_tpd_desc **tpd,
+ enum atl1c_trans_queue type)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u8 hdr_len;
+ u32 real_len;
+ unsigned short offload_type;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (unlikely(err))
+ return -1;
+ }
+ offload_type = skb_shinfo(skb)->gso_type;
+
+ if (offload_type & SKB_GSO_TCPV4) {
+ real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
+ + ntohs(ip_hdr(skb)->tot_len));
+
+ if (real_len < skb->len)
+ pskb_trim(skb, real_len);
+
+ hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+ if (unlikely(skb->len == hdr_len)) {
+ /* only xsum need */
+ if (netif_msg_tx_queued(adapter))
+ dev_warn(&pdev->dev,
+ "IPV4 tso with zero data??\n");
+ goto check_sum;
+ } else {
+ ip_hdr(skb)->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(
+ ip_hdr(skb)->saddr,
+ ip_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ (*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT;
+ }
+ }
+
+ if (offload_type & SKB_GSO_TCPV6) {
+ struct atl1c_tpd_ext_desc *etpd =
+ *(struct atl1c_tpd_ext_desc **)(tpd);
+
+ memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc));
+ *tpd = atl1c_get_tpd(adapter, type);
+ ipv6_hdr(skb)->payload_len = 0;
+ /* check payload == 0 byte ? */
+ hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
+ if (unlikely(skb->len == hdr_len)) {
+ /* only xsum need */
+ if (netif_msg_tx_queued(adapter))
+ dev_warn(&pdev->dev,
+ "IPV6 tso with zero data??\n");
+ goto check_sum;
+ } else
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(
+ &ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ etpd->word1 |= 1 << TPD_LSO_EN_SHIFT;
+ etpd->word1 |= 1 << TPD_LSO_VER_SHIFT;
+ etpd->pkt_len = cpu_to_le32(skb->len);
+ (*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT;
+ }
+
+ (*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT;
+ (*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) <<
+ TPD_TCPHDR_OFFSET_SHIFT;
+ (*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) <<
+ TPD_MSS_SHIFT;
+ return 0;
+ }
+
+check_sum:
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ u8 css, cso;
+ cso = skb_transport_offset(skb);
+
+ if (unlikely(cso & 0x1)) {
+ if (netif_msg_tx_err(adapter))
+ dev_err(&adapter->pdev->dev,
+ "payload offset should not an event number\n");
+ return -1;
+ } else {
+ css = cso + skb->csum_offset;
+
+ (*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) <<
+ TPD_PLOADOFFSET_SHIFT;
+ (*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) <<
+ TPD_CCSUM_OFFSET_SHIFT;
+ (*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT;
+ }
+ }
+ return 0;
+}
+
+static void atl1c_tx_map(struct atl1c_adapter *adapter,
+ struct sk_buff *skb, struct atl1c_tpd_desc *tpd,
+ enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_desc *use_tpd = NULL;
+ struct atl1c_buffer *buffer_info = NULL;
+ u16 buf_len = skb_headlen(skb);
+ u16 map_len = 0;
+ u16 mapped_len = 0;
+ u16 hdr_len = 0;
+ u16 nr_frags;
+ u16 f;
+ int tso;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK;
+ if (tso) {
+ /* TSO */
+ map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ use_tpd = tpd;
+
+ buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+ buffer_info->length = map_len;
+ buffer_info->dma = pci_map_single(adapter->pdev,
+ skb->data, hdr_len, PCI_DMA_TODEVICE);
+ buffer_info->state = ATL1_BUFFER_BUSY;
+ mapped_len += map_len;
+ use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+ use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
+ }
+
+ if (mapped_len < buf_len) {
+ /* mapped_len == 0, means we should use the first tpd,
+ which is given by caller */
+ if (mapped_len == 0)
+ use_tpd = tpd;
+ else {
+ use_tpd = atl1c_get_tpd(adapter, type);
+ memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+ use_tpd = atl1c_get_tpd(adapter, type);
+ memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+ }
+ buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+ buffer_info->length = buf_len - mapped_len;
+ buffer_info->dma =
+ pci_map_single(adapter->pdev, skb->data + mapped_len,
+ buffer_info->length, PCI_DMA_TODEVICE);
+ buffer_info->state = ATL1_BUFFER_BUSY;
+
+ use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+ use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+
+ use_tpd = atl1c_get_tpd(adapter, type);
+ memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
+
+ buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
+ buffer_info->length = frag->size;
+ buffer_info->dma =
+ pci_map_page(adapter->pdev, frag->page,
+ frag->page_offset,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ buffer_info->state = ATL1_BUFFER_BUSY;
+
+ use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
+ use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
+ }
+
+ /* The last tpd */
+ use_tpd->word1 |= 1 << TPD_EOP_SHIFT;
+ /* The last buffer info contain the skb address,
+ so it will be free after unmap */
+ buffer_info->skb = skb;
+}
+
+static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb,
+ struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type)
+{
+ struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
+ u32 prod_data;
+
+ AT_READ_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, &prod_data);
+ switch (type) {
+ case atl1c_trans_high:
+ prod_data &= 0xFFFF0000;
+ prod_data |= tpd_ring->next_to_use & 0xFFFF;
+ break;
+ case atl1c_trans_normal:
+ prod_data &= 0x0000FFFF;
+ prod_data |= (tpd_ring->next_to_use & 0xFFFF) << 16;
+ break;
+ default:
+ break;
+ }
+ wmb();
+ AT_WRITE_REG(&adapter->hw, REG_MB_PRIO_PROD_IDX, prod_data);
+}
+
+static int atl1c_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ unsigned long flags;
+ u16 tpd_req = 1;
+ struct atl1c_tpd_desc *tpd;
+ enum atl1c_trans_queue type = atl1c_trans_normal;
+
+ if (test_bit(__AT_DOWN, &adapter->flags)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ tpd_req = atl1c_cal_tpd_req(skb);
+ if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) {
+ if (netif_msg_pktdata(adapter))
+ dev_info(&adapter->pdev->dev, "tx locked\n");
+ return NETDEV_TX_LOCKED;
+ }
+ if (skb->mark == 0x01)
+ type = atl1c_trans_high;
+ else
+ type = atl1c_trans_normal;
+
+ if (atl1c_tpd_avail(adapter, type) < tpd_req) {
+ /* no enough descriptor, just stop queue */
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ tpd = atl1c_get_tpd(adapter, type);
+
+ /* do TSO and check sum */
+ if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) {
+ spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
+ u16 vlan = vlan_tx_tag_get(skb);
+ __le16 tag;
+
+ vlan = cpu_to_le16(vlan);
+ AT_VLAN_TO_TAG(vlan, tag);
+ tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT;
+ tpd->vlan_tag = tag;
+ }
+
+ if (skb_network_offset(skb) != ETH_HLEN)
+ tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */
+
+ atl1c_tx_map(adapter, skb, tpd, type);
+ atl1c_tx_queue(adapter, skb, tpd, type);
+
+ netdev->trans_start = jiffies;
+ spin_unlock_irqrestore(&adapter->tx_lock, flags);
+ return NETDEV_TX_OK;
+}
+
+static void atl1c_free_irq(struct atl1c_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+}
+
+static int atl1c_request_irq(struct atl1c_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct net_device *netdev = adapter->netdev;
+ int flags = 0;
+ int err = 0;
+
+ adapter->have_msi = true;
+ err = pci_enable_msi(adapter->pdev);
+ if (err) {
+ if (netif_msg_ifup(adapter))
+ dev_err(&pdev->dev,
+ "Unable to allocate MSI interrupt Error: %d\n",
+ err);
+ adapter->have_msi = false;
+ } else
+ netdev->irq = pdev->irq;
+
+ if (!adapter->have_msi)
+ flags |= IRQF_SHARED;
+ err = request_irq(adapter->pdev->irq, &atl1c_intr, flags,
+ netdev->name, netdev);
+ if (err) {
+ if (netif_msg_ifup(adapter))
+ dev_err(&pdev->dev,
+ "Unable to allocate interrupt Error: %d\n",
+ err);
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+ return err;
+ }
+ if (netif_msg_ifup(adapter))
+ dev_dbg(&pdev->dev, "atl1c_request_irq OK\n");
+ return err;
+}
+
+int atl1c_up(struct atl1c_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int num;
+ int err;
+ int i;
+
+ netif_carrier_off(netdev);
+ atl1c_init_ring_ptrs(adapter);
+ atl1c_set_multi(netdev);
+ atl1c_restore_vlan(adapter);
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ num = atl1c_alloc_rx_buffer(adapter, i);
+ if (unlikely(num == 0)) {
+ err = -ENOMEM;
+ goto err_alloc_rx;
+ }
+ }
+
+ if (atl1c_configure(adapter)) {
+ err = -EIO;
+ goto err_up;
+ }
+
+ err = atl1c_request_irq(adapter);
+ if (unlikely(err))
+ goto err_up;
+
+ clear_bit(__AT_DOWN, &adapter->flags);
+ napi_enable(&adapter->napi);
+ atl1c_irq_enable(adapter);
+ atl1c_check_link_status(adapter);
+ netif_start_queue(netdev);
+ return err;
+
+err_up:
+err_alloc_rx:
+ atl1c_clean_rx_ring(adapter);
+ return err;
+}
+
+void atl1c_down(struct atl1c_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ atl1c_del_timer(adapter);
+ atl1c_cancel_work(adapter);
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__AT_DOWN, &adapter->flags);
+ netif_carrier_off(netdev);
+ napi_disable(&adapter->napi);
+ atl1c_irq_disable(adapter);
+ atl1c_free_irq(adapter);
+ AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT);
+ /* reset MAC to disable all RX/TX */
+ atl1c_reset_mac(&adapter->hw);
+ msleep(1);
+
+ adapter->link_speed = SPEED_0;
+ adapter->link_duplex = -1;
+ atl1c_clean_tx_ring(adapter, atl1c_trans_normal);
+ atl1c_clean_tx_ring(adapter, atl1c_trans_high);
+ atl1c_clean_rx_ring(adapter);
+}
+
+/*
+ * atl1c_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ */
+static int atl1c_open(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__AT_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ /* allocate rx/tx dma buffer & descriptors */
+ err = atl1c_setup_ring_resources(adapter);
+ if (unlikely(err))
+ return err;
+
+ err = atl1c_up(adapter);
+ if (unlikely(err))
+ goto err_up;
+
+ if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
+ u32 phy_data;
+
+ AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data);
+ phy_data |= MDIO_AP_EN;
+ AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data);
+ }
+ return 0;
+
+err_up:
+ atl1c_free_irq(adapter);
+ atl1c_free_ring_resources(adapter);
+ atl1c_reset_mac(&adapter->hw);
+ return err;
+}
+
+/*
+ * atl1c_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ */
+static int atl1c_close(struct net_device *netdev)
+{
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+ atl1c_down(adapter);
+ atl1c_free_ring_resources(adapter);
+ return 0;
+}
+
+static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+ struct atl1c_hw *hw = &adapter->hw;
+ u32 ctrl;
+ u32 mac_ctrl_data;
+ u32 master_ctrl_data;
+ u32 wol_ctrl_data;
+ u16 mii_bmsr_data;
+ u16 save_autoneg_advertised;
+ u16 mii_intr_status_data;
+ u32 wufc = adapter->wol;
+ u32 i;
+ int retval = 0;
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
+ atl1c_down(adapter);
+ }
+ netif_device_detach(netdev);
+ atl1c_disable_l0s_l1(hw);
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+ if (wufc) {
+ AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
+ master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS;
+
+ /* get link status */
+ atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+ atl1c_read_phy_reg(hw, MII_BMSR, (u16 *)&mii_bmsr_data);
+ save_autoneg_advertised = hw->autoneg_advertised;
+ hw->autoneg_advertised = ADVERTISED_10baseT_Half;
+ if (atl1c_restart_autoneg(hw) != 0)
+ if (netif_msg_link(adapter))
+ dev_warn(&pdev->dev, "phy autoneg failed\n");
+ hw->phy_configured = false; /* re-init PHY when resume */
+ hw->autoneg_advertised = save_autoneg_advertised;
+ /* turn on magic packet wol */
+ if (wufc & AT_WUFC_MAG)
+ wol_ctrl_data = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
+
+ if (wufc & AT_WUFC_LNKC) {
+ for (i = 0; i < AT_SUSPEND_LINK_TIMEOUT; i++) {
+ msleep(100);
+ atl1c_read_phy_reg(hw, MII_BMSR,
+ (u16 *)&mii_bmsr_data);
+ if (mii_bmsr_data & BMSR_LSTATUS)
+ break;
+ }
+ if ((mii_bmsr_data & BMSR_LSTATUS) == 0)
+ if (netif_msg_link(adapter))
+ dev_warn(&pdev->dev,
+ "%s: Link may change"
+ "when suspend\n",
+ atl1c_driver_name);
+ wol_ctrl_data |= WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN;
+ /* only link up can wake up */
+ if (atl1c_write_phy_reg(hw, MII_IER, IER_LINK_UP) != 0) {
+ if (netif_msg_link(adapter))
+ dev_err(&pdev->dev,
+ "%s: read write phy "
+ "register failed.\n",
+ atl1c_driver_name);
+ goto wol_dis;
+ }
+ }
+ /* clear phy interrupt */
+ atl1c_read_phy_reg(hw, MII_ISR, &mii_intr_status_data);
+ /* Config MAC Ctrl register */
+ mac_ctrl_data = MAC_CTRL_RX_EN;
+ /* set to 10/100M halt duplex */
+ mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT;
+ mac_ctrl_data |= (((u32)adapter->hw.preamble_len &
+ MAC_CTRL_PRMLEN_MASK) <<
+ MAC_CTRL_PRMLEN_SHIFT);
+
+ if (adapter->vlgrp)
+ mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
+
+ /* magic packet maybe Broadcast&multicast&Unicast frame */
+ if (wufc & AT_WUFC_MAG)
+ mac_ctrl_data |= MAC_CTRL_BC_EN;
+
+ if (netif_msg_hw(adapter))
+ dev_dbg(&pdev->dev,
+ "%s: suspend MAC=0x%x\n",
+ atl1c_driver_name, mac_ctrl_data);
+ AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
+ AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
+ AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
+
+ /* pcie patch */
+ AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto suspend_exit;
+ }
+wol_dis:
+
+ /* WOL disabled */
+ AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+ /* pcie patch */
+ AT_READ_REG(hw, REG_PCIE_PHYMISC, &ctrl);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ AT_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+
+ atl1c_phy_disable(hw);
+ hw->phy_configured = false; /* re-init PHY when resume */
+
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+suspend_exit:
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int atl1c_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
+
+ atl1c_phy_reset(&adapter->hw);
+ atl1c_reset_mac(&adapter->hw);
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ atl1c_up(adapter);
+
+ return 0;
+}
+
+static void atl1c_shutdown(struct pci_dev *pdev)
+{
+ atl1c_suspend(pdev, PMSG_SUSPEND);
+}
+
+static const struct net_device_ops atl1c_netdev_ops = {
+ .ndo_open = atl1c_open,
+ .ndo_stop = atl1c_close,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_start_xmit = atl1c_xmit_frame,
+ .ndo_set_mac_address = atl1c_set_mac_addr,
+ .ndo_set_multicast_list = atl1c_set_multi,
+ .ndo_change_mtu = atl1c_change_mtu,
+ .ndo_do_ioctl = atl1c_ioctl,
+ .ndo_tx_timeout = atl1c_tx_timeout,
+ .ndo_get_stats = atl1c_get_stats,
+ .ndo_vlan_rx_register = atl1c_vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = atl1c_netpoll,
+#endif
+};
+
+static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
+{
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ pci_set_drvdata(pdev, netdev);
+
+ netdev->irq = pdev->irq;
+ netdev->netdev_ops = &atl1c_netdev_ops;
+ netdev->watchdog_timeo = AT_TX_WATCHDOG;
+ atl1c_set_ethtool_ops(netdev);
+
+ /* TODO: add when ready */
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_TSO |
+ NETIF_F_TSO6;
+ return 0;
+}
+
+/*
+ * atl1c_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in atl1c_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * atl1c_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ */
+static int __devinit atl1c_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct atl1c_adapter *adapter;
+ static int cards_found;
+
+ int err = 0;
+
+ /* enable device (incl. PCI PM wakeup and hotplug setup) */
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ return err;
+ }
+
+ /*
+ * The atl1c chip can DMA to 64-bit addresses, but it uses a single
+ * shared register for the high 32 bits, so only a single, aligned,
+ * 4 GB physical address range can be used at a time.
+ *
+ * Supporting 64-bit DMA on this hardware is more trouble than it's
+ * worth. It is far easier to limit to 32-bit DMA than update
+ * various kernel subsystems to support the mechanics required by a
+ * fixed-high-32-bit system.
+ */
+ if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+ dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
+ goto err_dma;
+ }
+
+ err = pci_request_regions(pdev, atl1c_driver_name);
+ if (err) {
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
+ goto err_pci_reg;
+ }
+
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct atl1c_adapter));
+ if (netdev == NULL) {
+ err = -ENOMEM;
+ dev_err(&pdev->dev, "etherdev alloc failed\n");
+ goto err_alloc_etherdev;
+ }
+
+ err = atl1c_init_netdev(netdev, pdev);
+ if (err) {
+ dev_err(&pdev->dev, "init netdevice failed\n");
+ goto err_init_netdev;
+ }
+ adapter = netdev_priv(netdev);
+ adapter->bd_number = cards_found;
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->hw.adapter = adapter;
+ adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg);
+ adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (!adapter->hw.hw_addr) {
+ err = -EIO;
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ goto err_ioremap;
+ }
+ netdev->base_addr = (unsigned long)adapter->hw.hw_addr;
+
+ /* init mii data */
+ adapter->mii.dev = netdev;
+ adapter->mii.mdio_read = atl1c_mdio_read;
+ adapter->mii.mdio_write = atl1c_mdio_write;
+ adapter->mii.phy_id_mask = 0x1f;
+ adapter->mii.reg_num_mask = MDIO_REG_ADDR_MASK;
+ netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64);
+ setup_timer(&adapter->phy_config_timer, atl1c_phy_config,
+ (unsigned long)adapter);
+ /* setup the private structure */
+ err = atl1c_sw_init(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "net device private data init failed\n");
+ goto err_sw_init;
+ }
+ atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
+ ATL1C_PCIE_PHY_RESET);
+
+ /* Init GPHY as early as possible due to power saving issue */
+ atl1c_phy_reset(&adapter->hw);
+
+ err = atl1c_reset_mac(&adapter->hw);
+ if (err) {
+ err = -EIO;
+ goto err_reset;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+ /* reset the controller to
+ * put the device in a known good starting state */
+ err = atl1c_phy_init(&adapter->hw);
+ if (err) {
+ err = -EIO;
+ goto err_reset;
+ }
+ if (atl1c_read_mac_addr(&adapter->hw) != 0) {
+ err = -EIO;
+ dev_err(&pdev->dev, "get mac address failed\n");
+ goto err_eeprom;
+ }
+ memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+ if (netif_msg_probe(adapter))
+ dev_dbg(&pdev->dev,
+ "mac address : %02x-%02x-%02x-%02x-%02x-%02x\n",
+ adapter->hw.mac_addr[0], adapter->hw.mac_addr[1],
+ adapter->hw.mac_addr[2], adapter->hw.mac_addr[3],
+ adapter->hw.mac_addr[4], adapter->hw.mac_addr[5]);
+
+ atl1c_hw_set_mac_addr(&adapter->hw);
+ INIT_WORK(&adapter->reset_task, atl1c_reset_task);
+ INIT_WORK(&adapter->link_chg_task, atl1c_link_chg_task);
+ err = register_netdev(netdev);
+ if (err) {
+ dev_err(&pdev->dev, "register netdevice failed\n");
+ goto err_register;
+ }
+
+ if (netif_msg_probe(adapter))
+ dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION);
+ cards_found++;
+ return 0;
+
+err_reset:
+err_register:
+err_sw_init:
+err_eeprom:
+ iounmap(adapter->hw.hw_addr);
+err_init_netdev:
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/*
+ * atl1c_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * atl1c_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ */
+static void __devexit atl1c_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ unregister_netdev(netdev);
+ atl1c_phy_disable(&adapter->hw);
+
+ iounmap(adapter->hw.hw_addr);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ free_netdev(netdev);
+}
+
+/*
+ * atl1c_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ atl1c_down(adapter);
+
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/*
+ * atl1c_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ if (netif_msg_hw(adapter))
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ atl1c_reset_mac(&adapter->hw);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/*
+ * atl1c_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the atl1c_resume routine.
+ */
+static void atl1c_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (atl1c_up(adapter)) {
+ if (netif_msg_hw(adapter))
+ dev_err(&pdev->dev,
+ "Cannot bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+static struct pci_error_handlers atl1c_err_handler = {
+ .error_detected = atl1c_io_error_detected,
+ .slot_reset = atl1c_io_slot_reset,
+ .resume = atl1c_io_resume,
+};
+
+static struct pci_driver atl1c_driver = {
+ .name = atl1c_driver_name,
+ .id_table = atl1c_pci_tbl,
+ .probe = atl1c_probe,
+ .remove = __devexit_p(atl1c_remove),
+ /* Power Managment Hooks */
+ .suspend = atl1c_suspend,
+ .resume = atl1c_resume,
+ .shutdown = atl1c_shutdown,
+ .err_handler = &atl1c_err_handler
+};
+
+/*
+ * atl1c_init_module - Driver Registration Routine
+ *
+ * atl1c_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ */
+static int __init atl1c_init_module(void)
+{
+ return pci_register_driver(&atl1c_driver);
+}
+
+/*
+ * atl1c_exit_module - Driver Exit Cleanup Routine
+ *
+ * atl1c_exit_module is called just before the driver is removed
+ * from memory.
+ */
+static void __exit atl1c_exit_module(void)
+{
+ pci_unregister_driver(&atl1c_driver);
+}
+
+module_init(atl1c_init_module);
+module_exit(atl1c_exit_module);
static void b44_chip_reset(struct b44 *bp, int reset_kind)
{
struct ssb_device *sdev = bp->sdev;
+ bool was_enabled;
- if (ssb_device_is_enabled(bp->sdev)) {
+ was_enabled = ssb_device_is_enabled(bp->sdev);
+
+ ssb_device_enable(bp->sdev, 0);
+ ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+
+ if (was_enabled) {
bw32(bp, B44_RCV_LAZY, 0);
bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1);
}
bw32(bp, B44_DMARX_CTRL, 0);
bp->rx_prod = bp->rx_cons = 0;
- } else
- ssb_pcicore_dev_irqvecs_enable(&sdev->bus->pcicore, sdev);
+ }
- ssb_device_enable(bp->sdev, 0);
b44_clear_stats(bp);
/*
struct net_device *dev = ssb_get_drvdata(sdev);
unregister_netdev(dev);
+ ssb_device_disable(sdev, 0);
ssb_bus_may_powerdown(sdev->bus);
free_netdev(dev);
ssb_pcihost_set_power_state(sdev, PCI_D3hot);
CH_DEVICE(0x30, 2), /* T3B10 */
CH_DEVICE(0x31, 3), /* T3B20 */
CH_DEVICE(0x32, 1), /* T3B02 */
+ CH_DEVICE(0x35, 6), /* T3C20-derived T3C10 */
{0,}
};
F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
{ S_GPIO9, S_GPIO3 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T320"},
+ {},
+ {},
+ {1, 0,
+ F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
+ F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
+ { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
+ &mi1_mdio_ext_ops, "Chelsio T310" },
};
/*
if (netif_running(dev))
nv_close(dev);
- nv_restore_mac_addr(pdev);
+ /*
+ * Restore the MAC so a kernel started by kexec won't get confused.
+ * If we really go for poweroff, we must not restore the MAC,
+ * otherwise the MAC for WOL will be reversed at least on some boards.
+ */
+ if (system_state != SYSTEM_POWER_OFF) {
+ nv_restore_mac_addr(pdev);
+ }
pci_disable_device(pdev);
+ /*
+ * Apparently it is not possible to reinitialise from D3 hot,
+ * only put the device into D3 if we really go for poweroff.
+ */
if (system_state == SYSTEM_POWER_OFF) {
if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
spin_lock_irqsave(&priv->txlock, flags);
/* check if there is space to queue this packet */
- if (nr_frags > priv->num_txbdfree) {
+ if ((nr_frags+1) > priv->num_txbdfree) {
/* no space, stop the queue */
netif_stop_queue(dev);
dev->stats.tx_fifo_errors++;
if (this_dev != 0) break; /* only autoprobe 1st one */
printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
}
- dev = alloc_ei_netdev();
+ dev = alloc_eip_netdev();
if (!dev)
break;
dev->irq = irq[this_dev];
{
struct mib_counters *p = &mp->mib_counters;
- spin_lock(&mp->mib_counters_lock);
+ spin_lock_bh(&mp->mib_counters_lock);
p->good_octets_received += mib_read(mp, 0x00);
p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
p->bad_octets_received += mib_read(mp, 0x08);
p->bad_crc_event += mib_read(mp, 0x74);
p->collision += mib_read(mp, 0x78);
p->late_collision += mib_read(mp, 0x7c);
- spin_unlock(&mp->mib_counters_lock);
+ spin_unlock_bh(&mp->mib_counters_lock);
mod_timer(&mp->mib_counters_timer, jiffies + 30 * HZ);
}
return;
}
- mc_spec = kmalloc(0x200, GFP_KERNEL);
+ mc_spec = kmalloc(0x200, GFP_ATOMIC);
if (mc_spec == NULL)
goto oom;
mc_other = mc_spec + (0x100 >> 2);
wrlp(mp, INT_MASK, 0x00000000);
rdlp(mp, INT_MASK);
- del_timer_sync(&mp->mib_counters_timer);
-
napi_disable(&mp->napi);
del_timer_sync(&mp->rx_oom);
port_reset(mp);
mv643xx_eth_get_stats(dev);
mib_counters_update(mp);
+ del_timer_sync(&mp->mib_counters_timer);
skb_queue_purge(&mp->rx_recycle);
adapter->pci_mem_read = netxen_nic_pci_mem_read_2M;
adapter->pci_mem_write = netxen_nic_pci_mem_write_2M;
- mem_ptr0 = ioremap(mem_base, mem_len);
+ mem_ptr0 = pci_ioremap_bar(pdev, 0);
+ if (mem_ptr0 == NULL) {
+ dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+ return -EIO;
+ }
+
pci_len0 = mem_len;
first_page_group_start = 0;
first_page_group_end = 0;
* See if the firmware gave us a virtual-physical port mapping.
*/
adapter->physical_port = adapter->portnum;
- i = adapter->pci_read_normalize(adapter, CRB_V2P(adapter->portnum));
- if (i != 0x55555555)
- adapter->physical_port = i;
+ if (adapter->fw_major < 4) {
+ i = adapter->pci_read_normalize(adapter,
+ CRB_V2P(adapter->portnum));
+ if (i != 0x55555555)
+ adapter->physical_port = i;
+ }
adapter->flags &= ~(NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED);
#define RTL8169_TX_TIMEOUT (6*HZ)
#define RTL8169_PHY_TIMEOUT (10*HZ)
-#define RTL_EEPROM_SIG cpu_to_le32(0x8129)
-#define RTL_EEPROM_SIG_MASK cpu_to_le32(0xffff)
+#define RTL_EEPROM_SIG 0x8129
#define RTL_EEPROM_SIG_ADDR 0x0000
+#define RTL_EEPROM_MAC_ADDR 0x0007
/* write/read MMIO register */
#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg))
/* Cfg9346Bits */
Cfg9346_Lock = 0x00,
Cfg9346_Unlock = 0xc0,
+ Cfg9346_Program = 0x80, /* Programming mode */
+ Cfg9346_EECS = 0x08, /* Chip select */
+ Cfg9346_EESK = 0x04, /* Serial data clock */
+ Cfg9346_EEDI = 0x02, /* Data input */
+ Cfg9346_EEDO = 0x01, /* Data output */
/* rx_mode_bits */
AcceptErr = 0x20,
/* RxConfigBits */
RxCfgFIFOShift = 13,
RxCfgDMAShift = 8,
+ RxCfg9356SEL = 6, /* EEPROM type: 0 = 9346, 1 = 9356 */
/* TxConfigBits */
TxInterFrameGapShift = 24,
};
+/* Delay between EEPROM clock transitions. Force out buffered PCI writes. */
+#define RTL_EEPROM_DELAY() RTL_R8(Cfg9346)
+#define RTL_EEPROM_READ_CMD 6
+
+/* read 16bit word stored in EEPROM. EEPROM is addressed by words. */
+static u16 rtl_eeprom_read(void __iomem *ioaddr, int addr)
+{
+ u16 result = 0;
+ int cmd, cmd_len, i;
+
+ /* check for EEPROM address size (in bits) */
+ if (RTL_R32(RxConfig) & (1 << RxCfg9356SEL)) {
+ /* EEPROM is 93C56 */
+ cmd_len = 3 + 8; /* 3 bits for command id and 8 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 8) | (addr & 0xff);
+ } else {
+ /* EEPROM is 93C46 */
+ cmd_len = 3 + 6; /* 3 bits for command id and 6 for address */
+ cmd = (RTL_EEPROM_READ_CMD << 6) | (addr & 0x3f);
+ }
+
+ /* enter programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* write command and requested address */
+ while (cmd_len--) {
+ u8 x = Cfg9346_Program | Cfg9346_EECS;
+
+ x |= (cmd & (1 << cmd_len)) ? Cfg9346_EEDI : 0;
+
+ /* write a bit */
+ RTL_W8(Cfg9346, x);
+ RTL_EEPROM_DELAY();
+
+ /* raise clock */
+ RTL_W8(Cfg9346, x | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+ }
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+
+ /* read back 16bit value */
+ for (i = 16; i > 0; i--) {
+ /* raise clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS | Cfg9346_EESK);
+ RTL_EEPROM_DELAY();
+
+ result <<= 1;
+ result |= (RTL_R8(Cfg9346) & Cfg9346_EEDO) ? 1 : 0;
+
+ /* lower clock */
+ RTL_W8(Cfg9346, Cfg9346_Program | Cfg9346_EECS);
+ RTL_EEPROM_DELAY();
+ }
+
+ RTL_W8(Cfg9346, Cfg9346_Program);
+ /* leave programming mode */
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+
+ return result;
+}
+
+static void rtl_init_mac_address(struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ struct pci_dev *pdev = tp->pci_dev;
+ u16 x;
+ u8 mac[8];
+
+ /* read EEPROM signature */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_SIG_ADDR);
+
+ if (x != RTL_EEPROM_SIG) {
+ dev_info(&pdev->dev, "Missing EEPROM signature: %04x\n", x);
+ return;
+ }
+
+ /* read MAC address */
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR);
+ mac[0] = x & 0xff;
+ mac[1] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 1);
+ mac[2] = x & 0xff;
+ mac[3] = x >> 8;
+ x = rtl_eeprom_read(ioaddr, RTL_EEPROM_MAC_ADDR + 2);
+ mac[4] = x & 0xff;
+ mac[5] = x >> 8;
+
+ if (netif_msg_probe(tp)) {
+ DECLARE_MAC_BUF(buf);
+
+ dev_info(&pdev->dev, "MAC address found in EEPROM: %s\n",
+ print_mac(buf, mac));
+ }
+
+ if (is_valid_ether_addr(mac))
+ rtl_rar_set(tp, mac);
+}
+
static int __devinit
rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
tp->mmio_addr = ioaddr;
+ rtl_init_mac_address(tp, ioaddr);
+
/* Get MAC address */
for (i = 0; i < MAC_ADDR_LEN; i++)
dev->dev_addr[i] = RTL_R8(MAC0 + i);
do {
msleep(1);
e2cmd = smsc911x_reg_read(pdata, E2P_CMD);
- } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+ } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
if (!timeout) {
SMSC_TRACE(DRV, "TIMED OUT");
do {
msleep(1);
e2cmd = smsc9420_reg_read(pd, E2P_CMD);
- } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+ } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout));
if (!timeout) {
smsc_info(HW, "TIMED OUT");
}
memcpy(data, &eeprom_data[eeprom->offset], len);
+ eeprom->magic = SMSC9420_EEPROM_MAGIC;
eeprom->len = len;
return 0;
}
struct smsc9420_pdata *pd = netdev_priv(dev);
int ret;
+ if (eeprom->magic != SMSC9420_EEPROM_MAGIC)
+ return -EINVAL;
+
smsc9420_eeprom_enable_access(pd);
smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
#define LAN_REGISTER_EXTENT (0x400)
#define SMSC9420_EEPROM_SIZE ((u32)11)
+#define SMSC9420_EEPROM_MAGIC (0x9420)
#define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4)
printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
"negotiated capability %4.4x.\n", dev->name,
duplex ? "full" : "half", np->phys[0], negotiated);
- iowrite16(ioread16(ioaddr + MACCtrl0) | duplex ? 0x20 : 0, ioaddr + MACCtrl0);
+ iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0);
}
}
if (limit-- <= 0)
break;
}
- if (limit <= 0)
+ if (limit < 0)
printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
gp->dev->name);
}
ib->phys_addr [5] = dev->dev_addr [4];
/* Setup the Tx ring entries */
- for (i = 0; i <= TX_RING_SIZE; i++) {
+ for (i = 0; i < TX_RING_SIZE; i++) {
leptr = LANCE_ADDR(aib + libbuff_offset(tx_buf, i));
ib->btx_ring [i].tmd0 = leptr;
ib->btx_ring [i].tmd1_hadr = leptr >> 16;
sbus_writeb(dev->dev_addr[4], &ib->phys_addr[5]);
/* Setup the Tx ring entries */
- for (i = 0; i <= TX_RING_SIZE; i++) {
+ for (i = 0; i < TX_RING_SIZE; i++) {
leptr = libbuff_offset(tx_buf, i);
sbus_writew(leptr, &ib->btx_ring [i].tmd0);
sbus_writeb(leptr >> 16,&ib->btx_ring [i].tmd1_hadr);
phyid = phydev->drv->phy_id & phydev->drv->phy_id_mask;
if (phyid != TG3_PHY_ID_BCMAC131) {
phyid &= TG3_PHY_OUI_MASK;
- if (phyid == TG3_PHY_OUI_1 &&
- phyid == TG3_PHY_OUI_2 &&
+ if (phyid == TG3_PHY_OUI_1 ||
+ phyid == TG3_PHY_OUI_2 ||
phyid == TG3_PHY_OUI_3)
do_low_power = true;
}
// Cables-to-Go USB Ethernet Adapter
USB_DEVICE(0x0b95, 0x772a),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // ABOCOM for pci
+ USB_DEVICE(0x14ea, 0xab11),
+ .driver_info = (unsigned long) &ax88178_info,
+}, {
+ // ASIX 88772a
+ USB_DEVICE(0x0db0, 0xa877),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3507g */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
if (dev->mii.mdio_read)
return mii_link_ok(&dev->mii);
- /* Otherwise, say we're up (to avoid breaking scripts) */
- return 1;
+ /* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+ return ethtool_op_get_link(net);
}
EXPORT_SYMBOL_GPL(usbnet_get_link);
USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+ /* Motorola MOTOMAGX phones */
+ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &bogus_mdlm_info,
},
/* Olympus has some models with a Zaurus-compatible option.
return 0;
}
+static int veth_close(struct net_device *dev)
+{
+ struct veth_priv *priv = netdev_priv(dev);
+
+ netif_carrier_off(dev);
+ netif_carrier_off(priv->peer);
+
+ return 0;
+}
+
static int veth_dev_init(struct net_device *dev)
{
struct veth_net_stats *stats;
}
static const struct net_device_ops veth_netdev_ops = {
- .ndo_init = veth_dev_init,
- .ndo_open = veth_open,
- .ndo_start_xmit = veth_xmit,
- .ndo_get_stats = veth_get_stats,
+ .ndo_init = veth_dev_init,
+ .ndo_open = veth_open,
+ .ndo_stop = veth_close,
+ .ndo_start_xmit = veth_xmit,
+ .ndo_get_stats = veth_get_stats,
+ .ndo_set_mac_address = eth_mac_addr,
};
static void veth_setup(struct net_device *dev)
dev->destructor = veth_dev_free;
}
-static void veth_change_state(struct net_device *dev)
-{
- struct net_device *peer;
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- peer = priv->peer;
-
- if (netif_carrier_ok(peer)) {
- if (!netif_carrier_ok(dev))
- netif_carrier_on(dev);
- } else {
- if (netif_carrier_ok(dev))
- netif_carrier_off(dev);
- }
-}
-
-static int veth_device_event(struct notifier_block *unused,
- unsigned long event, void *ptr)
-{
- struct net_device *dev = ptr;
-
- if (dev->netdev_ops->ndo_open != veth_open)
- goto out;
-
- switch (event) {
- case NETDEV_CHANGE:
- veth_change_state(dev);
- break;
- }
-out:
- return NOTIFY_DONE;
-}
-
-static struct notifier_block veth_notifier_block __read_mostly = {
- .notifier_call = veth_device_event,
-};
-
/*
* netlink interface
*/
static __init int veth_init(void)
{
- register_netdevice_notifier(&veth_notifier_block);
return rtnl_link_register(&veth_link_ops);
}
static __exit void veth_exit(void)
{
rtnl_link_unregister(&veth_link_ops);
- unregister_netdevice_notifier(&veth_notifier_block);
}
module_init(veth_init);
/* Firmware version we request when pulling the fw image file */
-#define I2400M_FW_VERSION "1.3"
+#define I2400M_FW_VERSION "1.4"
/**
bad:
if (ah)
ath9k_hw_detach(ah);
+ ath9k_exit_debug(sc);
return error;
}
static int ath_attach(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
- int error = 0;
+ int error = 0, i;
DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
/* initialize tx/rx engine */
error = ath_tx_init(sc, ATH_TXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
error = ath_rx_init(sc, ATH_RXBUF);
if (error != 0)
- goto detach;
+ goto error_attach;
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
/* Initialze h/w Rfkill */
INIT_DELAYED_WORK(&sc->rf_kill.rfkill_poll, ath_rfkill_poll);
/* Initialize s/w rfkill */
- if (ath_init_sw_rfkill(sc))
- goto detach;
+ error = ath_init_sw_rfkill(sc);
+ if (error)
+ goto error_attach;
#endif
error = ieee80211_register_hw(hw);
ath_init_leds(sc);
return 0;
-detach:
- ath_detach(sc);
+
+error_attach:
+ /* cleanup tx queues */
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
+ if (ATH_TXQ_SETUP(sc, i))
+ ath_tx_cleanupq(sc, &sc->tx.txq[i]);
+
+ ath9k_hw_detach(sc->sc_ah);
+ ath9k_exit_debug(sc);
+
return error;
}
pci_unmap_single(dev,
pci_unmap_addr(&txq->cmd[index]->meta, mapping),
pci_unmap_len(&txq->cmd[index]->meta, len),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
/* Unmap chunks, if any. */
for (i = 1; i < num_tbs; i++) {
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev,
out_cmd, sizeof(struct iwl_cmd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
/* Add buffer containing Tx command and MAC(!) header to TFD's
IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
phys_addr = pci_map_single(priv->pci_dev, out_cmd,
- len, PCI_DMA_TODEVICE);
+ len, PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
pci_unmap_len_set(&out_cmd->meta, len, len);
phys_addr += offsetof(struct iwl_cmd, hdr);
pci_unmap_single(priv->pci_dev,
pci_unmap_addr(&txq->cmd[cmd_idx]->meta, mapping),
pci_unmap_len(&txq->cmd[cmd_idx]->meta, len),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
static void lbs_ethtool_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
snprintf(info->fw_version, 32, "%u.%u.%u.p%u",
priv->fwrelease >> 24 & 0xff,
static int lbs_ethtool_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 * bytes)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_802_11_eeprom_access cmd;
int ret;
static void lbs_ethtool_get_stats(struct net_device *dev,
struct ethtool_stats *stats, uint64_t *data)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
static void lbs_ethtool_get_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
if (priv->wol_criteria == 0xffffffff) {
/* Interface driver didn't configure wake */
static int lbs_ethtool_set_wol(struct net_device *dev,
struct ethtool_wolinfo *wol)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
uint32_t criteria = 0;
if (priv->wol_criteria == 0xffffffff && wol->wolopts)
static ssize_t if_usb_firmware_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t if_usb_boot2_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct if_usb_card *cardp = priv->card;
char fwname[FIRMWARE_NAME_MAX];
int ret;
static ssize_t lbs_anycast_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
static ssize_t lbs_anycast_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
uint32_t datum;
int ret;
static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
u32 retry_limit;
static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_access mesh_access;
int ret;
unsigned long retry_limit;
static ssize_t lbs_rtap_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", priv->monitormode);
}
struct device_attribute *attr, const char * buf, size_t count)
{
int monitor_mode;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
sscanf(buf, "%x", &monitor_mode);
if (monitor_mode) {
static ssize_t lbs_mesh_get(struct device *dev,
struct device_attribute *attr, char * buf)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
}
static ssize_t lbs_mesh_set(struct device *dev,
struct device_attribute *attr, const char * buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int enable;
int ret, action = CMD_ACT_MESH_CONFIG_STOP;
*/
static int lbs_dev_open(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev) ;
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_NET);
*/
static int lbs_eth_stop(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
static void lbs_tx_timeout(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_TX);
*/
static struct net_device_stats *lbs_get_stats(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_NET);
return &priv->stats;
static int lbs_set_mac_address(struct net_device *dev, void *addr)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct sockaddr *phwaddr = addr;
struct cmd_ds_802_11_mac_address cmd;
static void lbs_set_multicast_list(struct net_device *dev)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
schedule_work(&priv->mcast_work);
}
static int lbs_thread(void *data)
{
struct net_device *dev = data;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
wait_queue_t wait;
lbs_deb_enter(LBS_DEB_THREAD);
goto done;
}
priv = netdev_priv(dev);
+ dev->ml_priv = priv;
if (lbs_init_adapter(priv)) {
lbs_pr_err("failed to initialize adapter structure.\n");
static int mesh_get_default_parameters(struct device *dev,
struct mrvl_mesh_defaults *defs)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
int ret;
static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t boottime_set(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
struct cmd_ds_mesh_config cmd;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
int len;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
struct cmd_ds_mesh_config cmd;
struct mrvl_mesh_defaults defs;
struct mrvl_meshie *ie;
- struct lbs_private *priv = netdev_priv(to_net_dev(dev));
+ struct lbs_private *priv = to_net_dev(dev)->ml_priv;
uint32_t datum;
int ret;
union iwreq_data *wrqu, char *extra)
{
DECLARE_SSID_BUF(ssid);
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
#define SCAN_ITEM_SIZE 128
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int err = 0;
char *ev = extra;
char *stop = ev + dwrq->length;
int lbs_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
unsigned long flags;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct txpd *txpd;
char *p802x_hdr;
uint16_t pkt_len;
static int lbs_get_freq(struct net_device *dev, struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int mesh_get_nick(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 val = vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_rts(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_set_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u32 val = vwrq->value;
static int lbs_get_frag(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
static int lbs_get_mode(struct net_device *dev,
struct iw_request_info *info, u32 * uwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 curlevel = 0;
int ret = 0;
static int lbs_set_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 slimit = 0, llimit = 0;
static int lbs_get_retry(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u16 val = 0;
struct iw_point *dwrq, char *extra)
{
int i, j;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_range *range = (struct iw_range *)extra;
struct chan_freq_power *cfp;
u8 rates[MAX_RATES + 1];
static int lbs_set_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_power(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
EXCELLENT = 95,
PERFECT = 100
};
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u32 rssi_qual;
u32 tx_qual;
u32 quality = 0;
struct iw_freq *fwrq, char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
struct assoc_request * assoc_req;
struct iw_request_info *info,
struct iw_freq *fwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct chan_freq_power *cfp;
int ret = -EINVAL;
static int lbs_set_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
u8 new_rate = 0;
int ret = -EINVAL;
u8 rates[MAX_RATES + 1];
static int lbs_get_rate(struct net_device *dev, struct iw_request_info *info,
struct iw_param *vwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info, u32 * uwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, u8 * extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_point *dwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
u16 is_default = 0, index = 0, set_tx_key = 0;
char *extra)
{
int ret = -EINVAL;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int index, max_key_len;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int alg = ext->alg;
struct assoc_request * assoc_req;
struct iw_point *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
struct assoc_request * assoc_req;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *dwrq,
char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
int updated = 0;
char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_param *vwrq, char *extra)
{
int ret = 0;
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
s16 dbm = (s16) vwrq->value;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_get_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_essid(struct net_device *dev, struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
u8 ssid[IW_ESSID_MAX_SIZE];
u8 ssid_len = 0;
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
lbs_deb_enter(LBS_DEB_WEXT);
struct iw_request_info *info,
struct iw_point *dwrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
int ret = 0;
lbs_deb_enter(LBS_DEB_WEXT);
static int lbs_set_wap(struct net_device *dev, struct iw_request_info *info,
struct sockaddr *awrq, char *extra)
{
- struct lbs_private *priv = netdev_priv(dev);
+ struct lbs_private *priv = dev->ml_priv;
struct assoc_request * assoc_req;
int ret = 0;
return NOTIFY_DONE;
}
+
+static void orinoco_register_pm_notifier(struct orinoco_private *priv)
+{
+ priv->pm_notifier.notifier_call = orinoco_pm_notifier;
+ register_pm_notifier(&priv->pm_notifier);
+}
+
+static void orinoco_unregister_pm_notifier(struct orinoco_private *priv)
+{
+ unregister_pm_notifier(&priv->pm_notifier);
+}
#else /* !PM_SLEEP || HERMES_CACHE_FW_ON_INIT */
-#define orinoco_pm_notifier NULL
+#define orinoco_register_pm_notifier(priv) do { } while(0)
+#define orinoco_unregister_pm_notifier(priv) do { } while(0)
#endif
/********************************************************************/
priv->cached_fw = NULL;
/* Register PM notifiers */
- priv->pm_notifier.notifier_call = orinoco_pm_notifier;
- register_pm_notifier(&priv->pm_notifier);
+ orinoco_register_pm_notifier(priv);
return dev;
}
kfree(rx_data);
}
- unregister_pm_notifier(&priv->pm_notifier);
+ orinoco_unregister_pm_notifier(priv);
orinoco_uncache_fw(priv);
priv->wpa_ie_len = 0;
{USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8197), .driver_info = DEVICE_RTL8187B},
{USB_DEVICE(0x0bda, 0x8198), .driver_info = DEVICE_RTL8187B},
+ /* Surecom */
+ {USB_DEVICE(0x0769, 0x11F2), .driver_info = DEVICE_RTL8187},
+ /* Logitech */
+ {USB_DEVICE(0x0789, 0x010C), .driver_info = DEVICE_RTL8187},
/* Netgear */
{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ /* Sphairon Access Systems GmbH */
+ {USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
+ /* Dick Smith Electronics */
+ {USB_DEVICE(0x1371, 0x9401), .driver_info = DEVICE_RTL8187},
/* Abocom */
{USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187},
+ /* Qcom */
+ {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
+ /* AirLive */
+ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
{}
};
static unsigned char
parport_atari_read_status(struct parport *p)
{
- return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
+ return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) |
PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR);
}
sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5);
local_irq_restore(flags);
/* MFP port I0 as input. */
- mfp.data_dir &= ~1;
+ st_mfp.data_dir &= ~1;
/* MFP port I0 interrupt on high->low edge. */
- mfp.active_edge &= ~1;
+ st_mfp.active_edge &= ~1;
p = parport_register_port((unsigned long)&sound_ym.wd_data,
IRQ_MFP_BUSY, PARPORT_DMA_NONE,
&parport_atari_ops);
entry_header = (struct acpi_dmar_header *)(dmar + 1);
while (((unsigned long)entry_header) <
(((unsigned long)dmar) + dmar_tbl->length)) {
+ /* Avoid looping forever on bad ACPI tables */
+ if (entry_header->length == 0) {
+ printk(KERN_WARNING PREFIX
+ "Invalid 0-length structure\n");
+ ret = -EINVAL;
+ break;
+ }
+
dmar_table_print_dmar_entry(entry_header);
switch (entry_header->type) {
int map_size;
u32 ver;
static int iommu_allocated = 0;
- int agaw;
+ int agaw = 0;
iommu = kzalloc(sizeof(*iommu), GFP_KERNEL);
if (!iommu)
iommu->cap = dmar_readq(iommu->reg + DMAR_CAP_REG);
iommu->ecap = dmar_readq(iommu->reg + DMAR_ECAP_REG);
+#ifdef CONFIG_DMAR
agaw = iommu_calculate_agaw(iommu);
if (agaw < 0) {
printk(KERN_ERR
iommu->seq_id);
goto error;
}
+#endif
iommu->agaw = agaw;
/* the registers might be more than one page */
}
}
+static int qi_check_fault(struct intel_iommu *iommu, int index)
+{
+ u32 fault;
+ int head;
+ struct q_inval *qi = iommu->qi;
+ int wait_index = (index + 1) % QI_LENGTH;
+
+ fault = readl(iommu->reg + DMAR_FSTS_REG);
+
+ /*
+ * If IQE happens, the head points to the descriptor associated
+ * with the error. No new descriptors are fetched until the IQE
+ * is cleared.
+ */
+ if (fault & DMA_FSTS_IQE) {
+ head = readl(iommu->reg + DMAR_IQH_REG);
+ if ((head >> 4) == index) {
+ memcpy(&qi->desc[index], &qi->desc[wait_index],
+ sizeof(struct qi_desc));
+ __iommu_flush_cache(iommu, &qi->desc[index],
+ sizeof(struct qi_desc));
+ writel(DMA_FSTS_IQE, iommu->reg + DMAR_FSTS_REG);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
/*
* Submit the queued invalidation descriptor to the remapping
* hardware unit and wait for its completion.
*/
-void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
+int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu)
{
+ int rc = 0;
struct q_inval *qi = iommu->qi;
struct qi_desc *hw, wait_desc;
int wait_index, index;
unsigned long flags;
if (!qi)
- return;
+ return 0;
hw = qi->desc;
hw[index] = *desc;
- wait_desc.low = QI_IWD_STATUS_DATA(2) | QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
+ wait_desc.low = QI_IWD_STATUS_DATA(QI_DONE) |
+ QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
wait_desc.high = virt_to_phys(&qi->desc_status[wait_index]);
hw[wait_index] = wait_desc;
qi->free_head = (qi->free_head + 2) % QI_LENGTH;
qi->free_cnt -= 2;
- spin_lock(&iommu->register_lock);
/*
* update the HW tail register indicating the presence of
* new descriptors.
*/
writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG);
- spin_unlock(&iommu->register_lock);
while (qi->desc_status[wait_index] != QI_DONE) {
/*
* a deadlock where the interrupt context can wait indefinitely
* for free slots in the queue.
*/
+ rc = qi_check_fault(iommu, index);
+ if (rc)
+ goto out;
+
spin_unlock(&qi->q_lock);
cpu_relax();
spin_lock(&qi->q_lock);
}
-
- qi->desc_status[index] = QI_DONE;
+out:
+ qi->desc_status[index] = qi->desc_status[wait_index] = QI_DONE;
reclaim_free_desc(qi);
spin_unlock_irqrestore(&qi->q_lock, flags);
+
+ return rc;
}
/*
desc.low = QI_IEC_TYPE;
desc.high = 0;
+ /* should never fail */
qi_submit_sync(&desc, iommu);
}
int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm,
u64 type, int non_present_entry_flush)
{
-
struct qi_desc desc;
if (non_present_entry_flush) {
| QI_CC_GRAN(type) | QI_CC_TYPE;
desc.high = 0;
- qi_submit_sync(&desc, iommu);
-
- return 0;
-
+ return qi_submit_sync(&desc, iommu);
}
int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih)
| QI_IOTLB_AM(size_order);
- qi_submit_sync(&desc, iommu);
-
- return 0;
-
+ return qi_submit_sync(&desc, iommu);
}
/*
int cmd_busy;
unsigned int no_cmd_complete:1;
unsigned int link_active_reporting:1;
+ unsigned int notification_enabled:1;
};
#define INT_BUTTON_IGNORE 0
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
struct controller *pcie_init(struct pcie_device *dev);
+int pcie_init_notification(struct controller *ctrl);
int pciehp_enable_slot(struct slot *p_slot);
int pciehp_disable_slot(struct slot *p_slot);
int pcie_enable_notification(struct controller *ctrl);
goto err_out_release_ctlr;
}
+ /* Enable events after we have setup the data structures */
+ rc = pcie_init_notification(ctrl);
+ if (rc) {
+ ctrl_err(ctrl, "Notification initialization failed\n");
+ goto err_out_release_ctlr;
+ }
+
/* Check if slot is occupied */
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
t_slot->hpc_ops->get_adapter_status(t_slot, &value);
ctrl_warn(ctrl, "Cannot disable software notification\n");
}
-static int pcie_init_notification(struct controller *ctrl)
+int pcie_init_notification(struct controller *ctrl)
{
if (pciehp_request_irq(ctrl))
return -1;
pciehp_free_irq(ctrl);
return -1;
}
+ ctrl->notification_enabled = 1;
return 0;
}
static void pcie_shutdown_notification(struct controller *ctrl)
{
- pcie_disable_notification(ctrl);
- pciehp_free_irq(ctrl);
+ if (ctrl->notification_enabled) {
+ pcie_disable_notification(ctrl);
+ pciehp_free_irq(ctrl);
+ ctrl->notification_enabled = 0;
+ }
}
static int pcie_init_slot(struct controller *ctrl)
if (pcie_init_slot(ctrl))
goto abort_ctrl;
- if (pcie_init_notification(ctrl))
- goto abort_slot;
-
return ctrl;
-abort_slot:
- pcie_cleanup_slot(ctrl);
abort_ctrl:
kfree(ctrl);
abort:
return index;
}
-static void qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
+static int qi_flush_iec(struct intel_iommu *iommu, int index, int mask)
{
struct qi_desc desc;
| QI_IEC_SELECTIVE;
desc.high = 0;
- qi_submit_sync(&desc, iommu);
+ return qi_submit_sync(&desc, iommu);
}
int map_irq_to_irte_handle(int irq, u16 *sub_handle)
int modify_irte(int irq, struct irte *irte_modified)
{
+ int rc;
int index;
struct irte *irte;
struct intel_iommu *iommu;
set_64bit((unsigned long *)irte, irte_modified->low | (1 << 1));
__iommu_flush_cache(iommu, irte, sizeof(*irte));
- qi_flush_iec(iommu, index, 0);
-
+ rc = qi_flush_iec(iommu, index, 0);
spin_unlock(&irq_2_ir_lock);
- return 0;
+
+ return rc;
}
int flush_irte(int irq)
{
+ int rc;
int index;
struct intel_iommu *iommu;
struct irq_2_iommu *irq_iommu;
index = irq_iommu->irte_index + irq_iommu->sub_handle;
- qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+ rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
spin_unlock(&irq_2_ir_lock);
- return 0;
+ return rc;
}
struct intel_iommu *map_ioapic_to_ir(int apic)
int free_irte(int irq)
{
+ int rc = 0;
int index, i;
struct irte *irte;
struct intel_iommu *iommu;
if (!irq_iommu->sub_handle) {
for (i = 0; i < (1 << irq_iommu->irte_mask); i++)
set_64bit((unsigned long *)irte, 0);
- qi_flush_iec(iommu, index, irq_iommu->irte_mask);
+ rc = qi_flush_iec(iommu, index, irq_iommu->irte_mask);
}
irq_iommu->iommu = NULL;
spin_unlock(&irq_2_ir_lock);
- return 0;
+ return rc;
}
static void iommu_set_intr_remapping(struct intel_iommu *iommu, int mode)
}
#endif /* 0 */
+
+static void set_device_error_reporting(struct pci_dev *dev, void *data)
+{
+ bool enable = *((bool *)data);
+
+ if (dev->pcie_type != PCIE_RC_PORT &&
+ dev->pcie_type != PCIE_SW_UPSTREAM_PORT &&
+ dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT)
+ return;
+
+ if (enable)
+ pci_enable_pcie_error_reporting(dev);
+ else
+ pci_disable_pcie_error_reporting(dev);
+}
+
+/**
+ * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports.
+ * @dev: pointer to root port's pci_dev data structure
+ * @enable: true = enable error reporting, false = disable error reporting.
+ */
+static void set_downstream_devices_error_reporting(struct pci_dev *dev,
+ bool enable)
+{
+ set_device_error_reporting(dev, &enable);
+ pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable);
+}
+
static int find_device_iter(struct device *device, void *data)
{
struct pci_dev *dev;
pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32);
pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32);
- /* Enable Root Port device reporting error itself */
- pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16);
- reg16 = reg16 |
- PCI_EXP_DEVCTL_CERE |
- PCI_EXP_DEVCTL_NFERE |
- PCI_EXP_DEVCTL_FERE |
- PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL,
- reg16);
+ /*
+ * Enable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, true);
/* Enable Root Port's interrupt in response to error messages */
pci_write_config_dword(pdev,
u32 reg32;
int pos;
+ /*
+ * Disable error reporting for the root port device and downstream port
+ * devices.
+ */
+ set_downstream_devices_error_reporting(pdev, false);
+
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
/* Disable Root's interrupt in response to error messages */
pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0);
pcie_portdrv_save_config(dev);
- pci_enable_pcie_error_reporting(dev);
-
return 0;
}
*/
#define AMD_813X_MISC 0x40
#define AMD_813X_NOIOAMODE (1<<0)
+#define AMD_813X_REV_B2 0x13
static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
{
if (noioapicquirk)
return;
+ if (dev->revision == AMD_813X_REV_B2)
+ return;
pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
pci_config_dword &= ~AMD_813X_NOIOAMODE;
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
quirk_msi_ht_cap);
-
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
ht_enable_msi_mapping);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+ ht_enable_msi_mapping);
+
/* The P5N32-SLI Premium motherboard from Asus has a problem with msi
* for the MCP55 NIC. It is not yet determined whether the msi problem
* also affects other devices. As for now, turn off msi for this device.
PCI_DEVICE_ID_NVIDIA_NVENET_15,
nvenet_msi_disable);
-static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = dev->devfn >> 3;
+ for (i = dev_no; i >= 0; i--) {
+ host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+ if (!host_bridge)
+ continue;
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ found = 1;
+ break;
+ }
+ pci_dev_put(host_bridge);
+ }
+
+ if (!found)
+ return;
+
+ /* root did that ! */
+ if (msi_ht_cap_enabled(host_bridge))
+ goto out;
+
+ ht_enable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void __devinit ht_disable_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags & ~HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+
+static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+{
int pos, ttl = 48;
+ int found = 0;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+
+ return found;
+}
+
+static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int found;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ found = ht_check_msi_mapping(dev);
+
+ /* no HT MSI CAP */
+ if (found == 0)
+ return;
/*
* HT MSI mapping should be disabled on devices that are below
pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
if (pos != 0) {
/* Host bridge is to HT */
- ht_enable_msi_mapping(dev);
+ if (found == 1) {
+ /* it is not enabled, try to enable it */
+ nv_ht_enable_msi_mapping(dev);
+ }
return;
}
- /* Host bridge is not to HT, disable HT MSI mapping on this device */
- pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
- while (pos && ttl--) {
- u8 flags;
+ /* HT MSI is not enabled */
+ if (found == 1)
+ return;
- if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
- &flags) == 0) {
- dev_info(&dev->dev, "Disabling HT MSI mapping");
- pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
- flags & ~HT_MSI_FLAGS_ENABLE);
- }
- pos = pci_find_next_ht_capability(dev, pos,
- HT_CAPTYPE_MSI_MAPPING);
- }
+ /* Host bridge is not to HT, disable HT MSI mapping on this device */
+ ht_disable_msi_mapping(dev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
struct platform_device *pf_device;
struct kfifo *fifo;
spinlock_t fifo_lock;
+ int rfkill_supported;
int rfkill_state;
int logolamp_registered;
int kblamps_registered;
show_lid_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x100))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x100)
return sprintf(buf, "open\n");
show_dock_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x200))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x200)
return sprintf(buf, "docked\n");
show_radios_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
- if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD)
+ if (!(fujitsu_hotkey->rfkill_supported & 0x20))
return sprintf(buf, "unknown\n");
if (fujitsu_hotkey->rfkill_state & 0x20)
return sprintf(buf, "on\n");
; /* No action, result is discarded */
vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i);
- fujitsu_hotkey->rfkill_state =
- call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+ fujitsu_hotkey->rfkill_supported =
+ call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0);
+
+ /* Make sure our bitmask of supported functions is cleared if the
+ RFKILL function block is not implemented, like on the S7020. */
+ if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD)
+ fujitsu_hotkey->rfkill_supported = 0;
+
+ if (fujitsu_hotkey->rfkill_supported)
+ fujitsu_hotkey->rfkill_state =
+ call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
/* Suspect this is a keymap of the application panel, print it */
printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
input = fujitsu_hotkey->input;
- fujitsu_hotkey->rfkill_state =
- call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
+ if (fujitsu_hotkey->rfkill_supported)
+ fujitsu_hotkey->rfkill_state =
+ call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0);
switch (event) {
case ACPI_FUJITSU_NOTIFY_CODE1:
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
#include <scsi/libiscsi_tcp.h>
/* from cxgb3 LLD */
struct cxgb3i_conn *cconn;
};
+/**
+ * struct cxgb3i_task_data - private iscsi task data
+ *
+ * @nr_frags: # of coalesced page frags (from scsi sgl)
+ * @frags: coalesced page frags (from scsi sgl)
+ * @skb: tx pdu skb
+ * @offset: data offset for the next pdu
+ * @count: max. possible pdu payload
+ * @sgoffset: offset to the first sg entry for a given offset
+ */
+#define MAX_PDU_FRAGS ((ULP2_MAX_PDU_PAYLOAD + 512 - 1) / 512)
+struct cxgb3i_task_data {
+ unsigned short nr_frags;
+ skb_frag_t frags[MAX_PDU_FRAGS];
+ struct sk_buff *skb;
+ unsigned int offset;
+ unsigned int count;
+ unsigned int sgoffset;
+};
+
int cxgb3i_iscsi_init(void);
void cxgb3i_iscsi_cleanup(void);
write_unlock(&cxgb3i_ddp_rwlock);
ddp_log_info("nppods %u (0x%x ~ 0x%x), bits %u, mask 0x%x,0x%x "
- "pkt %u,%u.\n",
+ "pkt %u/%u, %u/%u.\n",
ppmax, ddp->llimit, ddp->ulimit, ddp->idx_bits,
ddp->idx_mask, ddp->rsvd_tag_mask,
- ddp->max_txsz, ddp->max_rxsz);
+ ddp->max_txsz, uinfo.max_txsz,
+ ddp->max_rxsz, uinfo.max_rxsz);
return 0;
free_ddp_map:
* cxgb3i_adapter_ddp_init - initialize the adapter's ddp resource
* @tdev: t3cdev adapter
* @tformat: tag format
- * @txsz: max tx pkt size, filled in by this func.
- * @rxsz: max rx pkt size, filled in by this func.
+ * @txsz: max tx pdu payload size, filled in by this func.
+ * @rxsz: max rx pdu payload size, filled in by this func.
* initialize the ddp pagepod manager for a given adapter if needed and
* setup the tag format for a given iscsi entity
*/
tformat->sw_bits, tformat->rsvd_bits,
tformat->rsvd_shift, tformat->rsvd_mask);
- *txsz = ddp->max_txsz;
- *rxsz = ddp->max_rxsz;
- ddp_log_info("ddp max pkt size: %u, %u.\n",
- ddp->max_txsz, ddp->max_rxsz);
+ *txsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_txsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ *rxsz = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
+ ddp->max_rxsz - ISCSI_PDU_NONPAYLOAD_LEN);
+ ddp_log_info("max payload size: %u/%u, %u/%u.\n",
+ *txsz, ddp->max_txsz, *rxsz, ddp->max_rxsz);
return 0;
}
EXPORT_SYMBOL_GPL(cxgb3i_adapter_ddp_init);
#ifndef __CXGB3I_ULP2_DDP_H__
#define __CXGB3I_ULP2_DDP_H__
+#include <linux/vmalloc.h>
+
/**
* struct cxgb3i_tag_format - cxgb3i ulp tag format for an iscsi entity
*
struct sk_buff **gl_skb;
};
+#define ISCSI_PDU_NONPAYLOAD_LEN 312 /* bhs(48) + ahs(256) + digest(8) */
#define ULP2_MAX_PKT_SIZE 16224
-#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_MAX)
+#define ULP2_MAX_PDU_PAYLOAD (ULP2_MAX_PKT_SIZE - ISCSI_PDU_NONPAYLOAD_LEN)
#define PPOD_PAGES_MAX 4
#define PPOD_PAGES_SHIFT 2 /* 4 pages per pod */
#include "cxgb3i.h"
#define DRV_MODULE_NAME "cxgb3i"
-#define DRV_MODULE_VERSION "1.0.0"
-#define DRV_MODULE_RELDATE "Jun. 1, 2008"
+#define DRV_MODULE_VERSION "1.0.1"
+#define DRV_MODULE_RELDATE "Jan. 2009"
static char version[] =
"Chelsio S3xx iSCSI Driver " DRV_MODULE_NAME
cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
cmds_max,
- sizeof(struct iscsi_tcp_task),
+ sizeof(struct iscsi_tcp_task) +
+ sizeof(struct cxgb3i_task_data),
initial_cmdsn, ISCSI_MAX_TARGET);
if (!cls_session)
return NULL;
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->tx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = max(512 * MAX_SKB_FRAGS, SKB_TX_HEADROOM);
+ max = min(cconn->hba->snic->tx_max_size, max);
if (conn->max_xmit_dlength)
- conn->max_xmit_dlength = min_t(unsigned int,
- conn->max_xmit_dlength, max);
+ conn->max_xmit_dlength = min(conn->max_xmit_dlength, max);
else
conn->max_xmit_dlength = max;
align_pdu_size(conn->max_xmit_dlength);
- cxgb3i_log_info("conn 0x%p, max xmit %u.\n",
+ cxgb3i_api_debug("conn 0x%p, max xmit %u.\n",
conn, conn->max_xmit_dlength);
return 0;
}
{
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
- unsigned int max = min_t(unsigned int, ULP2_MAX_PDU_PAYLOAD,
- cconn->hba->snic->rx_max_size -
- ISCSI_PDU_NONPAYLOAD_MAX);
+ unsigned int max = cconn->hba->snic->rx_max_size;
align_pdu_size(max);
if (conn->max_recv_dlength) {
conn->max_recv_dlength, max);
return -EINVAL;
}
- conn->max_recv_dlength = min_t(unsigned int,
- conn->max_recv_dlength, max);
+ conn->max_recv_dlength = min(conn->max_recv_dlength, max);
align_pdu_size(conn->max_recv_dlength);
} else
conn->max_recv_dlength = max;
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = 128 * (ISCSI_DEF_XMIT_CMDS_MAX - 1),
+ .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
#include "cxgb3i_ddp.h"
#ifdef __DEBUG_C3CN_CONN__
-#define c3cn_conn_debug cxgb3i_log_info
+#define c3cn_conn_debug cxgb3i_log_debug
#else
#define c3cn_conn_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_TX__
-#define c3cn_tx_debug cxgb3i_log_debug
+#define c3cn_tx_debug cxgb3i_log_debug
#else
#define c3cn_tx_debug(fmt...)
#endif
#ifdef __DEBUG_C3CN_RX__
-#define c3cn_rx_debug cxgb3i_log_debug
+#define c3cn_rx_debug cxgb3i_log_debug
#else
#define c3cn_rx_debug(fmt...)
#endif
module_param(cxgb3_rcv_win, int, 0644);
MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)");
-static int cxgb3_snd_win = 64 * 1024;
+static int cxgb3_snd_win = 128 * 1024;
module_param(cxgb3_snd_win, int, 0644);
-MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)");
+MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=128KB)");
static int cxgb3_rx_credit_thres = 10 * 1024;
module_param(cxgb3_rx_credit_thres, int, 0644);
static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb,
int flags)
{
- CXGB3_SKB_CB(skb)->seq = c3cn->write_seq;
- CXGB3_SKB_CB(skb)->flags = flags;
+ skb_tcp_seq(skb) = c3cn->write_seq;
+ skb_flags(skb) = flags;
__skb_queue_tail(&c3cn->write_queue, skb);
}
* The number of WRs needed for an skb depends on the number of fragments
* in the skb and whether it has any payload in its main body. This maps the
* length of the gather list represented by an skb into the # of necessary WRs.
- *
- * The max. length of an skb is controlled by the max pdu size which is ~16K.
- * Also, assume the min. fragment length is the sector size (512), then add
- * extra fragment counts for iscsi bhs and payload padding.
+ * The extra two fragments are for iscsi bhs and payload padding.
*/
-#define SKB_WR_LIST_SIZE (16384/512 + 3)
+#define SKB_WR_LIST_SIZE (MAX_SKB_FRAGS + 2)
static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly;
static void s3_init_wr_tab(unsigned int wr_len)
static inline void reset_wr_list(struct s3_conn *c3cn)
{
- c3cn->wr_pending_head = NULL;
+ c3cn->wr_pending_head = c3cn->wr_pending_tail = NULL;
}
/*
static inline void enqueue_wr(struct s3_conn *c3cn,
struct sk_buff *skb)
{
- skb_wr_data(skb) = NULL;
+ skb_tx_wr_next(skb) = NULL;
/*
* We want to take an extra reference since both us and the driver
if (!c3cn->wr_pending_head)
c3cn->wr_pending_head = skb;
else
- skb_wr_data(skb) = skb;
+ skb_tx_wr_next(c3cn->wr_pending_tail) = skb;
c3cn->wr_pending_tail = skb;
}
+static int count_pending_wrs(struct s3_conn *c3cn)
+{
+ int n = 0;
+ const struct sk_buff *skb = c3cn->wr_pending_head;
+
+ while (skb) {
+ n += skb->csum;
+ skb = skb_tx_wr_next(skb);
+ }
+ return n;
+}
+
static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn)
{
return c3cn->wr_pending_head;
if (likely(skb)) {
/* Don't bother clearing the tail */
- c3cn->wr_pending_head = skb_wr_data(skb);
- skb_wr_data(skb) = NULL;
+ c3cn->wr_pending_head = skb_tx_wr_next(skb);
+ skb_tx_wr_next(skb) = NULL;
}
return skb;
}
}
static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb,
- int len)
+ int len, int req_completion)
{
struct tx_data_wr *req;
skb_reset_transport_header(skb);
req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req));
- req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA));
+ req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA) |
+ (req_completion ? F_WR_COMPL : 0));
req->wr_lo = htonl(V_WR_TID(c3cn->tid));
req->sndseq = htonl(c3cn->snd_nxt);
/* len includes the length of any HW ULP additions */
if (unlikely(c3cn->state == C3CN_STATE_CONNECTING ||
c3cn->state == C3CN_STATE_CLOSE_WAIT_1 ||
- c3cn->state == C3CN_STATE_ABORTING)) {
+ c3cn->state >= C3CN_STATE_ABORTING)) {
c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n",
c3cn, c3cn->state);
return 0;
if (c3cn->wr_avail < wrs_needed) {
c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, "
"wr %d < %u.\n",
- c3cn, skb->len, skb->datalen, frags,
+ c3cn, skb->len, skb->data_len, frags,
wrs_needed, c3cn->wr_avail);
break;
}
c3cn->wr_unacked += wrs_needed;
enqueue_wr(c3cn, skb);
- if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) {
- len += ulp_extra_len(skb);
- make_tx_data_wr(c3cn, skb, len);
- c3cn->snd_nxt += len;
- if ((req_completion
- && c3cn->wr_unacked == wrs_needed)
- || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL)
- || c3cn->wr_unacked >= c3cn->wr_max / 2) {
- struct work_request_hdr *wr = cplhdr(skb);
+ c3cn_tx_debug("c3cn 0x%p, enqueue, skb len %u/%u, frag %u, "
+ "wr %d, left %u, unack %u.\n",
+ c3cn, skb->len, skb->data_len, frags,
+ wrs_needed, c3cn->wr_avail, c3cn->wr_unacked);
+
- wr->wr_hi |= htonl(F_WR_COMPL);
+ if (likely(skb_flags(skb) & C3CB_FLAG_NEED_HDR)) {
+ if ((req_completion &&
+ c3cn->wr_unacked == wrs_needed) ||
+ (skb_flags(skb) & C3CB_FLAG_COMPL) ||
+ c3cn->wr_unacked >= c3cn->wr_max / 2) {
+ req_completion = 1;
c3cn->wr_unacked = 0;
}
- CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR;
+ len += ulp_extra_len(skb);
+ make_tx_data_wr(c3cn, skb, len, req_completion);
+ c3cn->snd_nxt += len;
+ skb_flags(skb) &= ~C3CB_FLAG_NEED_HDR;
}
total_size += skb->truesize;
if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED)))
/* upper layer has requested closing */
send_abort_req(c3cn);
- else if (c3cn_push_tx_frames(c3cn, 1))
+ else {
+ if (skb_queue_len(&c3cn->write_queue))
+ c3cn_push_tx_frames(c3cn, 1);
cxgb3i_conn_tx_open(c3cn);
+ }
}
static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb,
return;
}
- CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq);
- CXGB3_SKB_CB(skb)->flags = 0;
+ skb_tcp_seq(skb) = ntohl(hdr_cpl->seq);
+ skb_flags(skb) = 0;
skb_reset_transport_header(skb);
__skb_pull(skb, sizeof(struct cpl_iscsi_hdr));
goto abort_conn;
skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY;
- skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len);
- skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
+ skb_rx_pdulen(skb) = ntohs(ddp_cpl.len);
+ skb_rx_ddigest(skb) = ntohl(ddp_cpl.ulp_crc);
status = ntohl(ddp_cpl.ddp_status);
c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n",
- skb, skb->len, skb_ulp_pdulen(skb), status);
+ skb, skb->len, skb_rx_pdulen(skb), status);
if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR;
} else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT))
skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED;
- c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb);
+ c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_rx_pdulen(skb);
__pskb_trim(skb, len);
__skb_queue_tail(&c3cn->receive_queue, skb);
cxgb3i_conn_pdu_ready(c3cn);
* Process an acknowledgment of WR completion. Advance snd_una and send the
* next batch of work requests from the write queue.
*/
+static void check_wr_invariants(struct s3_conn *c3cn)
+{
+ int pending = count_pending_wrs(c3cn);
+
+ if (unlikely(c3cn->wr_avail + pending != c3cn->wr_max))
+ cxgb3i_log_error("TID %u: credit imbalance: avail %u, "
+ "pending %u, total should be %u\n",
+ c3cn->tid, c3cn->wr_avail, pending,
+ c3cn->wr_max);
+}
+
static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb)
{
struct cpl_wr_ack *hdr = cplhdr(skb);
unsigned int credits = ntohs(hdr->credits);
u32 snd_una = ntohl(hdr->snd_una);
+ c3cn_tx_debug("%u WR credits, avail %u, unack %u, TID %u, state %u.\n",
+ credits, c3cn->wr_avail, c3cn->wr_unacked,
+ c3cn->tid, c3cn->state);
+
c3cn->wr_avail += credits;
if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail)
c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail;
break;
}
if (unlikely(credits < p->csum)) {
+ struct tx_data_wr *w = cplhdr(p);
+ cxgb3i_log_error("TID %u got %u WR credits need %u, "
+ "len %u, main body %u, frags %u, "
+ "seq # %u, ACK una %u, ACK nxt %u, "
+ "WR_AVAIL %u, WRs pending %u\n",
+ c3cn->tid, credits, p->csum, p->len,
+ p->len - p->data_len,
+ skb_shinfo(p)->nr_frags,
+ ntohl(w->sndseq), snd_una,
+ ntohl(hdr->snd_nxt), c3cn->wr_avail,
+ count_pending_wrs(c3cn) - credits);
p->csum -= credits;
break;
} else {
}
}
- if (unlikely(before(snd_una, c3cn->snd_una)))
+ check_wr_invariants(c3cn);
+
+ if (unlikely(before(snd_una, c3cn->snd_una))) {
+ cxgb3i_log_error("TID %u, unexpected sequence # %u in WR_ACK "
+ "snd_una %u\n",
+ c3cn->tid, snd_una, c3cn->snd_una);
goto out_free;
+ }
if (c3cn->snd_una != snd_una) {
c3cn->snd_una = snd_una;
dst_confirm(c3cn->dst_cache);
}
- if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0))
+ if (skb_queue_len(&c3cn->write_queue)) {
+ if (c3cn_push_tx_frames(c3cn, 0))
+ cxgb3i_conn_tx_open(c3cn);
+ } else
cxgb3i_conn_tx_open(c3cn);
out_free:
__kfree_skb(skb);
struct dst_entry *dst)
{
BUG_ON(c3cn->cdev != cdev);
- c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs;
+ c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs - 1;
c3cn->wr_unacked = 0;
c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst));
goto out_err;
}
- err = -EPIPE;
if (c3cn->err) {
c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err);
+ err = -EPIPE;
+ goto out_err;
+ }
+
+ if (c3cn->write_seq - c3cn->snd_una >= cxgb3_snd_win) {
+ c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
+ c3cn, c3cn->write_seq, c3cn->snd_una,
+ cxgb3_snd_win);
+ err = -EAGAIN;
goto out_err;
}
* @flag: see C3CB_FLAG_* below
* @ulp_mode: ULP mode/submode of sk_buff
* @seq: tcp sequence number
- * @ddigest: pdu data digest
- * @pdulen: recovered pdu length
- * @wr_data: scratch area for tx wr
*/
+struct cxgb3_skb_rx_cb {
+ __u32 ddigest; /* data digest */
+ __u32 pdulen; /* recovered pdu length */
+};
+
+struct cxgb3_skb_tx_cb {
+ struct sk_buff *wr_next; /* next wr */
+};
+
struct cxgb3_skb_cb {
__u8 flags;
__u8 ulp_mode;
__u32 seq;
- __u32 ddigest;
- __u32 pdulen;
- struct sk_buff *wr_data;
+ union {
+ struct cxgb3_skb_rx_cb rx;
+ struct cxgb3_skb_tx_cb tx;
+ };
};
#define CXGB3_SKB_CB(skb) ((struct cxgb3_skb_cb *)&((skb)->cb[0]))
-
+#define skb_flags(skb) (CXGB3_SKB_CB(skb)->flags)
#define skb_ulp_mode(skb) (CXGB3_SKB_CB(skb)->ulp_mode)
-#define skb_ulp_ddigest(skb) (CXGB3_SKB_CB(skb)->ddigest)
-#define skb_ulp_pdulen(skb) (CXGB3_SKB_CB(skb)->pdulen)
-#define skb_wr_data(skb) (CXGB3_SKB_CB(skb)->wr_data)
+#define skb_tcp_seq(skb) (CXGB3_SKB_CB(skb)->seq)
+#define skb_rx_ddigest(skb) (CXGB3_SKB_CB(skb)->rx.ddigest)
+#define skb_rx_pdulen(skb) (CXGB3_SKB_CB(skb)->rx.pdulen)
+#define skb_tx_wr_next(skb) (CXGB3_SKB_CB(skb)->tx.wr_next)
enum c3cb_flags {
C3CB_FLAG_NEED_HDR = 1 << 0, /* packet needs a TX_DATA_WR header */
/* for TX: a skb must have a headroom of at least TX_HEADER_LEN bytes */
#define TX_HEADER_LEN \
(sizeof(struct tx_data_wr) + sizeof(struct sge_opaque_hdr))
+#define SKB_TX_HEADROOM SKB_MAX_HEAD(TX_HEADER_LEN)
/*
* get and set private ip for iscsi traffic
#define cxgb3i_tx_debug(fmt...)
#endif
+/* always allocate rooms for AHS */
+#define SKB_TX_PDU_HEADER_LEN \
+ (sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE)
+static unsigned int skb_extra_headroom;
static struct page *pad_page;
/*
void cxgb3i_conn_cleanup_task(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = task->dd_data +
+ sizeof(struct iscsi_tcp_task);
/* never reached the xmit task callout */
- if (tcp_task->dd_data)
- kfree_skb(tcp_task->dd_data);
- tcp_task->dd_data = NULL;
+ if (tdata->skb)
+ __kfree_skb(tdata->skb);
+ memset(tdata, 0, sizeof(struct cxgb3i_task_data));
/* MNC - Do we need a check in case this is called but
* cxgb3i_conn_alloc_pdu has never been called on the task */
iscsi_tcp_cleanup_task(task);
}
-/*
- * We do not support ahs yet
- */
+static int sgl_seek_offset(struct scatterlist *sgl, unsigned int sgcnt,
+ unsigned int offset, unsigned int *off,
+ struct scatterlist **sgp)
+{
+ int i;
+ struct scatterlist *sg;
+
+ for_each_sg(sgl, sg, sgcnt, i) {
+ if (offset < sg->length) {
+ *off = offset;
+ *sgp = sg;
+ return 0;
+ }
+ offset -= sg->length;
+ }
+ return -EFAULT;
+}
+
+static int sgl_read_to_frags(struct scatterlist *sg, unsigned int sgoffset,
+ unsigned int dlen, skb_frag_t *frags,
+ int frag_max)
+{
+ unsigned int datalen = dlen;
+ unsigned int sglen = sg->length - sgoffset;
+ struct page *page = sg_page(sg);
+ int i;
+
+ i = 0;
+ do {
+ unsigned int copy;
+
+ if (!sglen) {
+ sg = sg_next(sg);
+ if (!sg) {
+ cxgb3i_log_error("%s, sg NULL, len %u/%u.\n",
+ __func__, datalen, dlen);
+ return -EINVAL;
+ }
+ sgoffset = 0;
+ sglen = sg->length;
+ page = sg_page(sg);
+
+ }
+ copy = min(datalen, sglen);
+ if (i && page == frags[i - 1].page &&
+ sgoffset + sg->offset ==
+ frags[i - 1].page_offset + frags[i - 1].size) {
+ frags[i - 1].size += copy;
+ } else {
+ if (i >= frag_max) {
+ cxgb3i_log_error("%s, too many pages %u, "
+ "dlen %u.\n", __func__,
+ frag_max, dlen);
+ return -EINVAL;
+ }
+
+ frags[i].page = page;
+ frags[i].page_offset = sg->offset + sgoffset;
+ frags[i].size = copy;
+ i++;
+ }
+ datalen -= copy;
+ sgoffset += copy;
+ sglen -= copy;
+ } while (datalen);
+
+ return i;
+}
+
int cxgb3i_conn_alloc_pdu(struct iscsi_task *task, u8 opcode)
{
+ struct iscsi_conn *conn = task->conn;
struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb;
+ struct cxgb3i_task_data *tdata = task->dd_data + sizeof(*tcp_task);
+ struct scsi_cmnd *sc = task->sc;
+ int headroom = SKB_TX_PDU_HEADER_LEN;
+ tcp_task->dd_data = tdata;
task->hdr = NULL;
- /* always allocate rooms for AHS */
- skb = alloc_skb(sizeof(struct iscsi_hdr) + ISCSI_MAX_AHS_SIZE +
- TX_HEADER_LEN, GFP_ATOMIC);
- if (!skb)
+
+ /* write command, need to send data pdus */
+ if (skb_extra_headroom && (opcode == ISCSI_OP_SCSI_DATA_OUT ||
+ (opcode == ISCSI_OP_SCSI_CMD &&
+ (scsi_bidi_cmnd(sc) || sc->sc_data_direction == DMA_TO_DEVICE))))
+ headroom += min(skb_extra_headroom, conn->max_xmit_dlength);
+
+ tdata->skb = alloc_skb(TX_HEADER_LEN + headroom, GFP_ATOMIC);
+ if (!tdata->skb)
return -ENOMEM;
+ skb_reserve(tdata->skb, TX_HEADER_LEN);
cxgb3i_tx_debug("task 0x%p, opcode 0x%x, skb 0x%p.\n",
- task, opcode, skb);
+ task, opcode, tdata->skb);
- tcp_task->dd_data = skb;
- skb_reserve(skb, TX_HEADER_LEN);
- task->hdr = (struct iscsi_hdr *)skb->data;
- task->hdr_max = sizeof(struct iscsi_hdr);
+ task->hdr = (struct iscsi_hdr *)tdata->skb->data;
+ task->hdr_max = SKB_TX_PDU_HEADER_LEN;
/* data_out uses scsi_cmd's itt */
if (opcode != ISCSI_OP_SCSI_DATA_OUT)
int cxgb3i_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
unsigned int count)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_conn *conn = task->conn;
- struct page *pg;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen = count;
int i, padlen = iscsi_padding(count);
- skb_frag_t *frag;
+ struct page *pg;
cxgb3i_tx_debug("task 0x%p,0x%p, offset %u, count %u, skb 0x%p.\n",
task, task->sc, offset, count, skb);
return 0;
if (task->sc) {
- struct scatterlist *sg;
- struct scsi_data_buffer *sdb;
- unsigned int sgoffset = offset;
- struct page *sgpg;
- unsigned int sglen;
-
- sdb = scsi_out(task->sc);
- sg = sdb->table.sgl;
-
- for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
- cxgb3i_tx_debug("sg %d, page 0x%p, len %u offset %u\n",
- i, sg_page(sg), sg->length, sg->offset);
-
- if (sgoffset < sg->length)
- break;
- sgoffset -= sg->length;
+ struct scsi_data_buffer *sdb = scsi_out(task->sc);
+ struct scatterlist *sg = NULL;
+ int err;
+
+ tdata->offset = offset;
+ tdata->count = count;
+ err = sgl_seek_offset(sdb->table.sgl, sdb->table.nents,
+ tdata->offset, &tdata->sgoffset, &sg);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u/%u.\n",
+ sdb->table.nents, tdata->offset,
+ sdb->length);
+ return err;
}
- sgpg = sg_page(sg);
- sglen = sg->length - sgoffset;
-
- do {
- int j = skb_shinfo(skb)->nr_frags;
- unsigned int copy;
-
- if (!sglen) {
- sg = sg_next(sg);
- sgpg = sg_page(sg);
- sgoffset = 0;
- sglen = sg->length;
- ++i;
+ err = sgl_read_to_frags(sg, tdata->sgoffset, tdata->count,
+ tdata->frags, MAX_PDU_FRAGS);
+ if (err < 0) {
+ cxgb3i_log_warn("tpdu, sgl %u, bad offset %u + %u.\n",
+ sdb->table.nents, tdata->offset,
+ tdata->count);
+ return err;
+ }
+ tdata->nr_frags = err;
+
+ if (tdata->nr_frags > MAX_SKB_FRAGS ||
+ (padlen && tdata->nr_frags == MAX_SKB_FRAGS)) {
+ char *dst = skb->data + task->hdr_len;
+ skb_frag_t *frag = tdata->frags;
+
+ /* data fits in the skb's headroom */
+ for (i = 0; i < tdata->nr_frags; i++, frag++) {
+ char *src = kmap_atomic(frag->page,
+ KM_SOFTIRQ0);
+
+ memcpy(dst, src+frag->page_offset, frag->size);
+ dst += frag->size;
+ kunmap_atomic(src, KM_SOFTIRQ0);
}
- copy = min(sglen, datalen);
- if (j && skb_can_coalesce(skb, j, sgpg,
- sg->offset + sgoffset)) {
- skb_shinfo(skb)->frags[j - 1].size += copy;
- } else {
- get_page(sgpg);
- skb_fill_page_desc(skb, j, sgpg,
- sg->offset + sgoffset, copy);
+ if (padlen) {
+ memset(dst, 0, padlen);
+ padlen = 0;
}
- sgoffset += copy;
- sglen -= copy;
- datalen -= copy;
- } while (datalen);
+ skb_put(skb, count + padlen);
+ } else {
+ /* data fit into frag_list */
+ for (i = 0; i < tdata->nr_frags; i++)
+ get_page(tdata->frags[i].page);
+
+ memcpy(skb_shinfo(skb)->frags, tdata->frags,
+ sizeof(skb_frag_t) * tdata->nr_frags);
+ skb_shinfo(skb)->nr_frags = tdata->nr_frags;
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
+ }
+
} else {
pg = virt_to_page(task->data);
- while (datalen) {
- i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
-
- get_page(pg);
- frag->page = pg;
- frag->page_offset = 0;
- frag->size = min((unsigned int)PAGE_SIZE, datalen);
-
- skb_shinfo(skb)->nr_frags++;
- datalen -= frag->size;
- pg++;
- }
+ get_page(pg);
+ skb_fill_page_desc(skb, 0, pg, offset_in_page(task->data),
+ count);
+ skb->len += count;
+ skb->data_len += count;
+ skb->truesize += count;
}
if (padlen) {
i = skb_shinfo(skb)->nr_frags;
- frag = &skb_shinfo(skb)->frags[i];
- frag->page = pad_page;
- frag->page_offset = 0;
- frag->size = padlen;
- skb_shinfo(skb)->nr_frags++;
+ get_page(pad_page);
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, pad_page, 0,
+ padlen);
+
+ skb->data_len += padlen;
+ skb->truesize += padlen;
+ skb->len += padlen;
}
- datalen = count + padlen;
- skb->data_len += datalen;
- skb->truesize += datalen;
- skb->len += datalen;
return 0;
}
int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
{
- struct iscsi_tcp_task *tcp_task = task->dd_data;
- struct sk_buff *skb = tcp_task->dd_data;
struct iscsi_tcp_conn *tcp_conn = task->conn->dd_data;
struct cxgb3i_conn *cconn = tcp_conn->dd_data;
+ struct iscsi_tcp_task *tcp_task = task->dd_data;
+ struct cxgb3i_task_data *tdata = tcp_task->dd_data;
+ struct sk_buff *skb = tdata->skb;
unsigned int datalen;
int err;
return 0;
datalen = skb->data_len;
- tcp_task->dd_data = NULL;
+ tdata->skb = NULL;
err = cxgb3i_c3cn_send_pdus(cconn->cep->c3cn, skb);
- cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
- task, skb, skb->len, skb->data_len, err);
if (err > 0) {
int pdulen = err;
+ cxgb3i_tx_debug("task 0x%p, skb 0x%p, len %u/%u, rv %d.\n",
+ task, skb, skb->len, skb->data_len, err);
+
if (task->conn->hdrdgst_en)
pdulen += ISCSI_DIGEST_SIZE;
if (datalen && task->conn->datadgst_en)
return err;
}
/* reset skb to send when we are called again */
- tcp_task->dd_data = skb;
+ tdata->skb = skb;
return -EAGAIN;
}
int cxgb3i_pdu_init(void)
{
+ if (SKB_TX_HEADROOM > (512 * MAX_SKB_FRAGS))
+ skb_extra_headroom = SKB_TX_HEADROOM;
pad_page = alloc_page(GFP_KERNEL);
if (!pad_page)
return -ENOMEM;
skb = skb_peek(&c3cn->receive_queue);
while (!err && skb) {
__skb_unlink(skb, &c3cn->receive_queue);
- read += skb_ulp_pdulen(skb);
+ read += skb_rx_pdulen(skb);
+ cxgb3i_rx_debug("conn 0x%p, cn 0x%p, rx skb 0x%p, pdulen %u.\n",
+ conn, c3cn, skb, skb_rx_pdulen(skb));
err = cxgb3i_conn_read_pdu_skb(conn, skb);
__kfree_skb(skb);
skb = skb_peek(&c3cn->receive_queue);
cxgb3i_c3cn_rx_credits(c3cn, read);
}
conn->rxdata_octets += read;
+
+ if (err) {
+ cxgb3i_log_info("conn 0x%p rx failed err %d.\n", conn, err);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ }
}
void cxgb3i_conn_tx_open(struct s3_conn *c3cn)
#define ULP2_FLAG_DCRC_ERROR 0x20
#define ULP2_FLAG_PAD_ERROR 0x40
-void cxgb3i_conn_closing(struct s3_conn *);
+void cxgb3i_conn_closing(struct s3_conn *c3cn);
void cxgb3i_conn_pdu_ready(struct s3_conn *c3cn);
void cxgb3i_conn_tx_open(struct s3_conn *c3cn);
#endif
{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
vfc_cmd->resp_len = sizeof(vfc_cmd->rsp);
vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata;
vfc_cmd->tgt_scsi_id = rport->port_id;
- if ((rport->supported_classes & FC_COS_CLASS3) &&
- (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3))
- vfc_cmd->flags = IBMVFC_CLASS_3_ERR;
vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd);
int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun);
memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len);
return -ENOMEM;
}
+ memset(tgt, 0, sizeof(*tgt));
tgt->scsi_id = scsi_id;
tgt->new_scsi_id = scsi_id;
tgt->vhost = vhost;
static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
{
struct ibmvfc_host *vhost = tgt->vhost;
- struct fc_rport *rport;
+ struct fc_rport *rport = tgt->rport;
unsigned long flags;
+ if (rport) {
+ tgt_dbg(tgt, "Setting rport roles\n");
+ fc_remote_port_rolechg(rport, tgt->ids.roles);
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return;
+ }
+
tgt_dbg(tgt, "Adding rport\n");
rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
spin_lock_irqsave(vhost->host->host_lock, flags);
#define IBMVFC_DRIVER_VERSION "1.0.4"
#define IBMVFC_DRIVER_DATE "(November 14, 2008)"
-#define IBMVFC_DEFAULT_TIMEOUT 15
+#define IBMVFC_DEFAULT_TIMEOUT 60
#define IBMVFC_INIT_TIMEOUT 120
#define IBMVFC_MAX_REQUESTS_DEFAULT 100
sdev_printk(KERN_ERR, cmd->device,
"Can't allocate memory "
"for indirect table\n");
+ scsi_dma_unmap(cmd);
return 0;
}
}
if (!shost->can_queue)
shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX;
+ if (!shost->transportt->eh_timed_out)
+ shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
return scsi_add_host(shost, pdev);
}
EXPORT_SYMBOL_GPL(iscsi_host_add);
shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size);
if (!shost)
return NULL;
- shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out;
if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) {
if (qdepth != 0)
sizeof(struct lpfc_name));
break;
default:
+ kfree(els_data);
return;
}
memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name));
test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags))
msleep(1000);
- if (ha->mqenable) {
- if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
- "Queue delete failed.\n");
- vha->req_ques[0] = ha->req_q_map[0]->id;
- }
-
qla24xx_disable_vp(vha);
fc_remove_host(vha->host);
vha->host_no, vha->vp_idx, vha));
}
+ if (ha->mqenable) {
+ if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, ha,
+ "Queue delete failed.\n");
+ }
+
scsi_host_put(vha->host);
qla_printk(KERN_INFO, ha, "vport %d deleted\n", id);
return 0;
/* Work events. */
enum qla_work_type {
QLA_EVT_AEN,
+ QLA_EVT_IDC_ACK,
};
enum fc_host_event_code code;
u32 data;
} aen;
+ struct {
+#define QLA_IDC_ACK_REGS 7
+ uint16_t mb[QLA_IDC_ACK_REGS];
+ } idc_ack;
} u;
};
"QLA2462", "Sun PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x141 */
"QLE2460", "Sun PCI-Express to 2Gb FC, Single Channel", /* 0x142 */
"QLE2462", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x143 */
- "QEM2462" "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */
+ "QEM2462", "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */
"QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */
"QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */
"QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */
#define MBA_IDC_NOTIFY 0x8101
#define MBA_IDC_TIME_EXT 0x8102
+#define MBC_IDC_ACK 0x101
+
struct nvram_81xx {
/* NVRAM header. */
uint8_t id[4];
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum
fc_host_event_code, u32);
+extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *);
extern void qla2x00_abort_fcport_cmds(fc_port_t *);
extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *,
extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *);
+extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
/* Globa function prototypes for multi-q */
extern int qla25xx_request_irq(struct rsp_que *);
-extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *,
- uint8_t);
-extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *,
- uint8_t);
+extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
+extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
uint16_t, uint8_t, uint8_t);
extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
icb->firmware_options_2 |=
__constant_cpu_to_le32(BIT_18);
- icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22);
+ icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22);
icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23);
- ha->rsp_q_map[0]->options = icb->firmware_options_2;
WRT_REG_DWORD(®->isp25mq.req_q_in, 0);
WRT_REG_DWORD(®->isp25mq.req_q_out, 0);
rsp = ha->rsp_q_map[i];
if (rsp) {
rsp->options &= ~BIT_0;
- ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options);
+ ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING
"%s Rsp que:%d init failed\n", __func__,
if (req) {
/* Clear outstanding commands array. */
req->options &= ~BIT_0;
- ret = qla25xx_init_req_que(base_vha, req, req->options);
+ ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING
"%s Req que:%d init failed\n", __func__,
}
}
+static void
+qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
+{
+ static char *event[] =
+ { "Complete", "Request Notification", "Time Extension" };
+ int rval;
+ struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24;
+ uint16_t __iomem *wptr;
+ uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS];
+
+ /* Seed data -- mailbox1 -> mailbox7. */
+ wptr = (uint16_t __iomem *)®24->mailbox1;
+ for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++)
+ mb[cnt] = RD_REG_WORD(wptr);
+
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+ "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no,
+ event[aen & 0xff],
+ mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6]));
+
+ /* Acknowledgement needed? [Notify && non-zero timeout]. */
+ timeout = (descr >> 8) & 0xf;
+ if (aen != MBA_IDC_NOTIFY || !timeout)
+ return;
+
+ DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- "
+ "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout));
+
+ rval = qla2x00_post_idc_ack_work(vha, mb);
+ if (rval != QLA_SUCCESS)
+ qla_printk(KERN_WARNING, vha->hw,
+ "IDC failed to post ACK.\n");
+}
+
/**
* qla2x00_async_event() - Process aynchronous events.
* @ha: SCSI driver HA context
"%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3]));
break;
case MBA_IDC_COMPLETE:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2],
- mb[3]));
- break;
case MBA_IDC_NOTIFY:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Request Notification -- %04x %04x %04x\n", vha->host_no,
- mb[1], mb[2], mb[3]));
- /**** Mailbox registers 4 - 7 valid!!! */
- break;
case MBA_IDC_TIME_EXT:
- DEBUG2(printk("scsi(%ld): Inter-Driver Commucation "
- "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1],
- mb[2], mb[3]));
- /**** Mailbox registers 4 - 7 valid!!! */
+ qla81xx_idc_event(vha, mb[0], mb[1]);
break;
}
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
- uint16_t msix_disabled_hccr = 0;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
spin_lock_irq(&ha->hardware_lock);
- msix_disabled_hccr = rsp->options;
- if (!rsp->id)
- msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22);
- else
- msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6);
-
qla24xx_process_response_queue(rsp);
- if (!msix_disabled_hccr)
- WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
-
spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
int
-qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req,
- uint8_t options)
+qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
{
int rval;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
- mcp->mb[1] = options;
+ mcp->mb[1] = req->options;
mcp->mb[2] = MSW(LSD(req->dma));
mcp->mb[3] = LSW(LSD(req->dma));
mcp->mb[6] = MSW(MSD(req->dma));
mcp->tov = 60;
spin_lock_irqsave(&ha->hardware_lock, flags);
- if (!(options & BIT_0)) {
+ if (!(req->options & BIT_0)) {
WRT_REG_DWORD(®->req_q_in, 0);
WRT_REG_DWORD(®->req_q_out, 0);
}
}
int
-qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp,
- uint8_t options)
+qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
{
int rval;
unsigned long flags;
struct qla_hw_data *ha = vha->hw;
mcp->mb[0] = MBC_INITIALIZE_MULTIQ;
- mcp->mb[1] = options;
+ mcp->mb[1] = rsp->options;
mcp->mb[2] = MSW(LSD(rsp->dma));
mcp->mb[3] = LSW(LSD(rsp->dma));
mcp->mb[6] = MSW(MSD(rsp->dma));
mcp->tov = 60;
spin_lock_irqsave(&ha->hardware_lock, flags);
- if (!(options & BIT_0)) {
+ if (!(rsp->options & BIT_0)) {
WRT_REG_DWORD(®->rsp_q_out, 0);
WRT_REG_DWORD(®->rsp_q_in, 0);
}
return rval;
}
+int
+qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_IDC_ACK;
+ memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+ mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}
qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
- memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES);
+ memset(vha->req_ques, 0, sizeof(vha->req_ques));
vha->req_ques[0] = ha->req_q_map[0]->id;
host->can_queue = ha->req_q_map[0]->length + 128;
host->this_id = 255;
if (req) {
req->options |= BIT_0;
- ret = qla25xx_init_req_que(vha, req, req->options);
+ ret = qla25xx_init_req_que(vha, req);
}
if (ret == QLA_SUCCESS)
qla25xx_free_req_que(vha, req);
if (rsp) {
rsp->options |= BIT_0;
- ret = qla25xx_init_rsp_que(vha, rsp, rsp->options);
+ ret = qla25xx_init_rsp_que(vha, rsp);
}
if (ret == QLA_SUCCESS)
qla25xx_free_rsp_que(vha, rsp);
req->options |= BIT_3;
req->qos = qos;
- ret = qla25xx_init_req_que(vha, req, req->options);
+ ret = qla25xx_init_req_que(vha, req);
if (ret != QLA_SUCCESS)
DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__));
/* restore options bit */
req->max_q_depth = ha->req_q_map[0]->max_q_depth;
mutex_unlock(&ha->vport_lock);
- ret = qla25xx_init_req_que(base_vha, req, options);
+ ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
mutex_lock(&ha->vport_lock);
if (ret)
goto que_failed;
- ret = qla25xx_init_rsp_que(base_vha, rsp, options);
+ ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
mutex_lock(&ha->vport_lock);
return qla2x00_post_work(vha, e, 1);
}
+int
+qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
+ return qla2x00_post_work(vha, e, 1);
+}
+
static void
qla2x00_do_work(struct scsi_qla_host *vha)
{
fc_host_post_event(vha->host, fc_get_event_number(),
e->u.aen.code, e->u.aen.data);
break;
+ case QLA_EVT_IDC_ACK:
+ qla81xx_idc_ack(vha, e->u.idc_ack.mb);
+ break;
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
"end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
- switch (le32_to_cpu(region->code)) {
+ switch (le32_to_cpu(region->code) & 0xff) {
case FLT_REG_FW:
ha->flt_region_fw = start;
break;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.00-k2"
+#define QLA2XXX_VERSION "8.03.00-k3"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
action = ACTION_FAIL;
break;
case ABORTED_COMMAND:
+ action = ACTION_FAIL;
if (sshdr.asc == 0x10) { /* DIF */
description = "Target Data Integrity Failure";
- action = ACTION_FAIL;
error = -EILSEQ;
- } else
- action = ACTION_RETRY;
+ }
break;
case NOT_READY:
/* If the device is in the process of becoming
return sdev;
out_device_destroy:
+ scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
put_device(&sdev->sdev_gendev);
out:
static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
static void sd_print_result(struct scsi_disk *, int);
+static DEFINE_SPINLOCK(sd_index_lock);
static DEFINE_IDA(sd_index_ida);
/* This semaphore is used to mediate the 0->1 reference get in the
if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
goto out_put;
+ spin_lock(&sd_index_lock);
error = ida_get_new(&sd_index_ida, &index);
+ spin_unlock(&sd_index_lock);
} while (error == -EAGAIN);
if (error)
return 0;
out_free_index:
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, index);
+ spin_unlock(&sd_index_lock);
out_put:
put_disk(gd);
out_free:
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct gendisk *disk = sdkp->disk;
+ spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, sdkp->index);
+ spin_unlock(&sd_index_lock);
disk->private_data = NULL;
put_disk(disk);
case BLKTRACESETUP:
return blk_trace_setup(sdp->device->request_queue,
sdp->disk->disk_name,
- sdp->device->sdev_gendev.devt,
+ MKDEV(SCSI_GENERIC_MAJOR, sdp->index),
(char *)arg);
case BLKTRACESTART:
return blk_trace_startstop(sdp->device->request_queue, 1);
serial8250_set_mctrl(&up->port, up->port.mctrl);
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
/*
* Do a quick test to see if we receive an
* interrupt when we enable the TX irq.
up->bugs &= ~UART_BUG_TXEN;
}
+dont_test_tx_en:
spin_unlock_irqrestore(&up->port.lock, flags);
/*
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int skip_tx_en_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_port *port, int idx)
+{
+ port->flags |= UPF_NO_TXEN_TEST;
+ printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
+ "[%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor,
+ priv->dev->device,
+ priv->dev->subsystem_vendor,
+ priv->dev->subsystem_device);
+
+ return pci_default_setup(priv, board, port, idx);
+}
+
/* This should be in linux/pci_ids.h */
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
.init = pci_inteli960ni_init,
.setup = pci_default_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_8257X_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573L_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_82573E_SOL,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = skip_tx_en_setup,
+ },
/*
* ITE
*/
# define SCSPTR3 0xffed0024 /* 16 bit SCIF */
# define SCSPTR4 0xffee0024 /* 16 bit SCIF */
# define SCSPTR5 0xffef0024 /* 16 bit SCIF */
-# define SCIF_OPER 0x0001 /* Overrun error bit */
+# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \
defined(CONFIG_CPU_SUBTYPE_SH7203) || \
if (scan_timer.function != NULL)
del_timer(&scan_timer);
- if (keypad_enabled)
- misc_deregister(&keypad_dev);
+ if (pprt != NULL) {
+ if (keypad_enabled)
+ misc_deregister(&keypad_dev);
+
+ if (lcd_enabled) {
+ panel_lcd_print("\x0cLCD driver " PANEL_VERSION
+ "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
+ misc_deregister(&lcd_dev);
+ }
- if (lcd_enabled) {
- panel_lcd_print("\x0cLCD driver " PANEL_VERSION
- "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
- misc_deregister(&lcd_dev);
+ /* TODO: free all input signals */
+ parport_release(pprt);
+ parport_unregister_device(pprt);
}
-
- /* TODO: free all input signals */
-
- parport_release(pprt);
- parport_unregister_device(pprt);
parport_unregister_driver(&panel_driver);
}
config RTL8187SE
tristate "RealTek RTL8187SE Wireless LAN NIC driver"
depends on PCI
+ depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
default N
---help---
void ieee80211_crypto_deinit(void)
{
struct list_head *ptr, *n;
+ struct ieee80211_crypto_alg *alg = NULL;
if (hcrypt == NULL)
return;
- for (ptr = hcrypt->algs.next, n = ptr->next; ptr != &hcrypt->algs;
- ptr = n, n = ptr->next) {
- struct ieee80211_crypto_alg *alg =
- (struct ieee80211_crypto_alg *) ptr;
- list_del(ptr);
- printk(KERN_DEBUG "ieee80211_crypt: unregistered algorithm "
- "'%s' (deinit)\n", alg->ops->name);
- kfree(alg);
+ list_for_each_safe(ptr, n, &hcrypt->algs) {
+ alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
+ if (alg) {
+ list_del(ptr);
+ printk(KERN_DEBUG
+ "ieee80211_crypt: unregistered algorithm '%s' (deinit)\n",
+ alg->ops->name);
+ kfree(alg);
+ }
}
-
kfree(hcrypt);
}
{
pci_unregister_driver (&rtl8180_pci_driver);
rtl8180_proc_module_remove();
- ieee80211_crypto_deinit();
ieee80211_crypto_tkip_exit();
ieee80211_crypto_ccmp_exit();
ieee80211_crypto_wep_exit();
+ ieee80211_crypto_deinit();
DMESG("Exiting");
}
struct usb_device *udev = interface_to_usbdev(intf);
struct wbsoft_priv *priv;
struct ieee80211_hw *dev;
- int err;
+ int nr, err;
usb_get_dev(udev);
// 20060630.2 Check the device if it already be opened
- err = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
- 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
- 0x0, 0x400, <mp, 4, HZ*100 );
- if (err)
+ nr = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+ 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+ 0x0, 0x400, <mp, 4, HZ*100 );
+ if (nr < 0) {
+ err = nr;
goto error;
+ }
ltmp = cpu_to_le32(ltmp);
if (ltmp) { // Is already initialized?
}
dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
- if (!dev)
+ if (!dev) {
+ err = -ENOMEM;
goto error;
+ }
priv = dev->priv;
}
dev->extra_tx_headroom = 12; /* FIXME */
- dev->flags = 0;
+ dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
dev->channel_change_time = 1000;
+ dev->max_signal = 100;
dev->queues = 1;
dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &wbsoft_band_2GHz;
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
+ },
+ { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
+ .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
+ data interface instead of
+ communications interface.
+ Maybe we should define a new
+ quirk for this. */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
if (result <= 0 && result != -ETIMEDOUT)
continue;
if (result > 1 && ((u8 *)buf)[1] != type) {
- result = -EPROTO;
+ result = -ENODATA;
continue;
}
break;
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
(USB_DT_STRING << 8) + index, langid, buf, size,
USB_CTRL_GET_TIMEOUT);
- if (!(result == 0 || result == -EPIPE))
- break;
+ if (result == 0 || result == -EPIPE)
+ continue;
+ if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) {
+ result = -ENODATA;
+ continue;
+ }
+ break;
}
return result;
}
boolean "OMAP USB Device Controller"
depends on ARCH_OMAP
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
+ select USB_OTG_UTILS if ARCH_OMAP
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
f->hs_descriptors = usb_copy_descriptors(hs_function);
obex->hs.obex_in = usb_find_endpoint(hs_function,
- f->descriptors, &obex_hs_ep_in_desc);
+ f->hs_descriptors, &obex_hs_ep_in_desc);
obex->hs.obex_out = usb_find_endpoint(hs_function,
- f->descriptors, &obex_hs_ep_out_desc);
+ f->hs_descriptors, &obex_hs_ep_out_desc);
}
/* Avoid letting this gadget enumerate until the userspace
mod_data.protocol_type = USB_SC_SCSI;
mod_data.protocol_name = "Transparent SCSI";
- if (gadget_is_sh(fsg->gadget))
+ /* Some peripheral controllers are known not to be able to
+ * halt bulk endpoints correctly. If one of them is present,
+ * disable stalls.
+ */
+ if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget))
mod_data.can_stall = 0;
if (mod_data.release == 0xffff) { // Parameter wasn't set
}
if (zlt)
tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+
p_QH->max_pkt_length = cpu_to_le32(tmp);
+ p_QH->next_dtd_ptr = 1;
+ p_QH->size_ioc_int_sts = 0;
return;
}
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
ehci->periodic_size = DEFAULT_I_TDPS;
+ INIT_LIST_HEAD(&ehci->cached_itd_list);
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
ehci->reclaim = NULL;
ehci->next_uframe = -1;
+ ehci->clock_frame = -1;
/*
* dedicate a qh for the async ring head, since we couldn't unlink
static void ehci_mem_cleanup (struct ehci_hcd *ehci)
{
+ free_cached_itd_list(ehci);
if (ehci->async)
qh_put (ehci->async);
ehci->async = NULL;
is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0;
stream->bEndpointAddress &= 0x0f;
- stream->ep->hcpriv = NULL;
+ if (stream->ep)
+ stream->ep->hcpriv = NULL;
if (stream->rescheduled) {
ehci_info (ehci, "ep%d%s-iso rescheduled "
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
- /* OK to recycle this ITD now that its completion callback ran. */
+
done:
usb_put_urb(urb);
itd->urb = NULL;
- itd->stream = NULL;
- list_move(&itd->itd_list, &stream->free_list);
- iso_stream_put(ehci, stream);
-
+ if (ehci->clock_frame != itd->frame || itd->index[7] != -1) {
+ /* OK to recycle this ITD now. */
+ itd->stream = NULL;
+ list_move(&itd->itd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ } else {
+ /* HW might remember this ITD, so we can't recycle it yet.
+ * Move it to a safe place until a new frame starts.
+ */
+ list_move(&itd->itd_list, &ehci->cached_itd_list);
+ if (stream->refcount == 2) {
+ /* If iso_stream_put() were called here, stream
+ * would be freed. Instead, just prevent reuse.
+ */
+ stream->ep->hcpriv = NULL;
+ stream->ep = NULL;
+ }
+ }
return retval;
}
/*-------------------------------------------------------------------------*/
+static void free_cached_itd_list(struct ehci_hcd *ehci)
+{
+ struct ehci_itd *itd, *n;
+
+ list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
+ struct ehci_iso_stream *stream = itd->stream;
+ itd->stream = NULL;
+ list_move(&itd->itd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
static void
scan_periodic (struct ehci_hcd *ehci)
{
* Touches as few pages as possible: cache-friendly.
*/
now_uframe = ehci->next_uframe;
- if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
+ if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
clock = ehci_readl(ehci, &ehci->regs->frame_index);
- else
+ clock_frame = (clock >> 3) % ehci->periodic_size;
+ } else {
clock = now_uframe + mod - 1;
+ clock_frame = -1;
+ }
+ if (ehci->clock_frame != clock_frame) {
+ free_cached_itd_list(ehci);
+ ehci->clock_frame = clock_frame;
+ }
clock %= mod;
clock_frame = clock >> 3;
/* rescan the rest of this frame, then ... */
clock = now;
clock_frame = clock >> 3;
+ if (ehci->clock_frame != clock_frame) {
+ free_cached_itd_list(ehci);
+ ehci->clock_frame = clock_frame;
+ }
} else {
now_uframe++;
now_uframe %= mod;
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
+ /* list of itds completed while clock_frame was still active */
+ struct list_head cached_itd_list;
+ unsigned clock_frame;
+
/* per root hub port */
unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
}
}
+static void free_cached_itd_list(struct ehci_hcd *ehci);
+
/*-------------------------------------------------------------------------*/
#include <linux/usb/ehci_def.h>
u32 revision;
musb->mregs += DAVINCI_BASE_OFFSET;
-#if 0
- /* REVISIT there's something odd about clocking, this
- * didn't appear do the job ...
- */
- musb->clock = clk_get(pDevice, "usb");
- if (IS_ERR(musb->clock))
- return PTR_ERR(musb->clock);
- status = clk_enable(musb->clock);
- if (status < 0)
- return -ENODEV;
-#endif
+ clk_enable(musb->clock);
/* returns zero if e.g. not clocked */
revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
}
phy_off();
+
+ clk_disable(musb->clock);
+
return 0;
}
unsigned musb_debug;
-module_param(musb_debug, uint, S_IRUGO | S_IWUSR);
+module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case OTG_STATE_A_HOST:
case OTG_STATE_A_SUSPEND:
+ usb_hcd_resume_root_hub(musb_to_hcd(musb));
musb_root_disconnect(musb);
if (musb->a_wait_bcon != 0)
musb_platform_try_idle(musb, jiffies
#ifdef CONFIG_SYSFS
device_remove_file(musb->controller, &dev_attr_mode);
device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
device_remove_file(musb->controller, &dev_attr_srp);
#endif
#endif
#ifdef CONFIG_SYSFS
device_remove_file(musb->controller, &dev_attr_mode);
device_remove_file(musb->controller, &dev_attr_vbus);
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
device_remove_file(musb->controller, &dev_attr_srp);
#endif
#endif
return platform_driver_probe(&musb_driver, musb_probe);
}
-/* make us init after usbcore and before usb
- * gadget and host-side drivers start to register
+/* make us init after usbcore and i2c (transceivers, regulators, etc)
+ * and before usb gadget and host-side drivers start to register
*/
-subsys_initcall(musb_init);
+fs_initcall(musb_init);
static void __exit musb_cleanup(void)
{
struct usb_request *request = &req->request;
struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out;
void __iomem *epio = musb->endpoints[epnum].regs;
- u16 fifo_count = 0;
+ unsigned fifo_count = 0;
u16 len = musb_ep->packet_sz;
csr = musb_readw(epio, MUSB_RXCSR);
len, fifo_count,
musb_ep->packet_sz);
- fifo_count = min(len, fifo_count);
+ fifo_count = min_t(unsigned, len, fifo_count);
#ifdef CONFIG_USB_TUSB_OMAP_DMA
if (tusb_dma_omap() && musb_ep->dma) {
static struct musb_qh *
musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
{
- int is_in;
struct musb_hw_ep *ep = qh->hw_ep;
struct musb *musb = ep->musb;
+ int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
- if (ep->is_shared_fifo)
- is_in = 1;
- else
- is_in = usb_pipein(urb->pipe);
-
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
else
qh = musb_giveback(qh, urb, urb->status);
- if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) {
+ if (qh != NULL && qh->is_ready) {
DBG(4, "... next ep%d %cX urb %p\n",
hw_ep->epnum, is_in ? 'R' : 'T',
next_urb(qh));
switch (musb->ep0_stage) {
case MUSB_EP0_IN:
fifo_dest = urb->transfer_buffer + urb->actual_length;
- fifo_count = min(len, ((u16) (urb->transfer_buffer_length
- - urb->actual_length)));
+ fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count < len)
urb->status = -EOVERFLOW;
}
/* FALLTHROUGH */
case MUSB_EP0_OUT:
- fifo_count = min(qh->maxpacket, ((u16)
- (urb->transfer_buffer_length
- - urb->actual_length)));
-
+ fifo_count = min_t(size_t, qh->maxpacket,
+ urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count) {
fifo_dest = (u8 *) (urb->transfer_buffer
+ urb->actual_length);
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
- struct musb_qh *qh = hw_ep->out_qh;
+ struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh
+ : hw_ep->out_qh;
u32 status = 0;
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
* packets before updating TXCSR ... other docs disagree ...
*/
/* PIO: start next packet in this URB */
- wLength = min(qh->maxpacket, (u16) wLength);
+ if (wLength > qh->maxpacket)
+ wLength = qh->maxpacket;
musb_write_fifo(hw_ep, wLength, buf);
qh->segsize = wLength;
}
qh->type_reg = type_reg;
- /* precompute rxinterval/txinterval register */
- interval = min((u8)16, epd->bInterval); /* log encoding */
+ /* Precompute RXINTERVAL/TXINTERVAL register */
switch (qh->type) {
case USB_ENDPOINT_XFER_INT:
- /* fullspeed uses linear encoding */
- if (USB_SPEED_FULL == urb->dev->speed) {
- interval = epd->bInterval;
- if (!interval)
- interval = 1;
+ /*
+ * Full/low speeds use the linear encoding,
+ * high speed uses the logarithmic encoding.
+ */
+ if (urb->dev->speed <= USB_SPEED_FULL) {
+ interval = max_t(u8, epd->bInterval, 1);
+ break;
}
/* FALLTHROUGH */
case USB_ENDPOINT_XFER_ISOC:
- /* iso always uses log encoding */
+ /* ISO always uses logarithmic encoding */
+ interval = min_t(u8, epd->bInterval, 16);
break;
default:
/* REVISIT we actually want to use NAK limits, hinting to the
goto done;
/* Any URB not actively programmed into endpoint hardware can be
- * immediately given back. Such an URB must be at the head of its
+ * immediately given back; that's any URB not at the head of an
* endpoint queue, unless someday we get real DMA queues. And even
- * then, it might not be known to the hardware...
+ * if it's at the head, it might not be known to the hardware...
*
* Otherwise abort current transfer, pending dma, etc.; urb->status
* has already been updated. This is a synchronous abort; it'd be
qh->is_ready = 0;
__musb_giveback(musb, urb, 0);
qh->is_ready = ready;
+
+ /* If nothing else (usually musb_giveback) is using it
+ * and its URB list has emptied, recycle this qh.
+ */
+ if (ready && list_empty(&qh->hep->urb_list)) {
+ qh->hep->hcpriv = NULL;
+ list_del(&qh->ring);
+ kfree(qh);
+ }
} else
ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
done:
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
u8 is_in = epnum & USB_DIR_IN;
- struct musb_qh *qh = hep->hcpriv;
- struct urb *urb, *tmp;
+ struct musb_qh *qh;
+ struct urb *urb;
struct list_head *sched;
- if (!qh)
- return;
-
spin_lock_irqsave(&musb->lock, flags);
+ qh = hep->hcpriv;
+ if (qh == NULL)
+ goto exit;
+
switch (qh->type) {
case USB_ENDPOINT_XFER_CONTROL:
sched = &musb->control;
/* cleanup */
musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN);
- } else
- urb = NULL;
- /* then just nuke all the others */
- list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list)
- musb_giveback(qh, urb, -ESHUTDOWN);
+ /* Then nuke all the others ... and advance the
+ * queue on hw_ep (e.g. bulk ring) when we're done.
+ */
+ while (!list_empty(&hep->urb_list)) {
+ urb = next_urb(qh);
+ urb->status = -ESHUTDOWN;
+ musb_advance_schedule(musb, urb, qh->hw_ep, is_in);
+ }
+ } else {
+ /* Just empty the queue; the hardware is busy with
+ * other transfers, and since !qh->is_ready nothing
+ * will activate any of these as it advances.
+ */
+ while (!list_empty(&hep->urb_list))
+ __musb_giveback(musb, next_urb(qh), -ESHUTDOWN);
+ hep->hcpriv = NULL;
+ list_del(&qh->ring);
+ kfree(qh);
+ }
+exit:
spin_unlock_irqrestore(&musb->lock, flags);
}
/* Ericsson products */
#define ERICSSON_VENDOR_ID 0x0bdb
-#define ERICSSON_PRODUCT_F3507G 0x1900
+#define ERICSSON_PRODUCT_F3507G_1 0x1900
+#define ERICSSON_PRODUCT_F3507G_2 0x1902
+
+#define BENQ_VENDOR_ID 0x04a5
+#define BENQ_PRODUCT_H10 0x4068
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
- { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+ { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) },
+ { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) },
+ { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
"Genesys Logic",
"USB to IDE Optical",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff,
"Genesys Logic",
"USB to IDE Disk",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ),
+ US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ),
/* Reported by Ben Efros <ben@pc-doctor.com> */
UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451,
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
- mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+ mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
tt_get_par(&par);
tt_encode_var(&atafb_predefined[0], &par);
tt_dmasnd.ctrl = DMASND_CTRL_OFF;
udelay(20); /* wait a while for things to settle down */
}
- mono_moni = (mfp.par_dt_reg & 0x80) == 0;
+ mono_moni = (st_mfp.par_dt_reg & 0x80) == 0;
stste_get_par(&par);
stste_encode_var(&atafb_predefined[0], &par);
return;
local_irq_save(flags);
- mfp.tim_ct_b = 0x10;
- mfp.active_edge |= 8;
- mfp.tim_ct_b = 0;
- mfp.tim_dt_b = 0xf0;
- mfp.tim_ct_b = 8;
- while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */
+ st_mfp.tim_ct_b = 0x10;
+ st_mfp.active_edge |= 8;
+ st_mfp.tim_ct_b = 0;
+ st_mfp.tim_dt_b = 0xf0;
+ st_mfp.tim_ct_b = 8;
+ while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */
;
- new = mfp.tim_dt_b;
+ new = st_mfp.tim_dt_b;
do {
udelay(LINE_DELAY);
old = new;
- new = mfp.tim_dt_b;
+ new = st_mfp.tim_dt_b;
} while (old != new);
- mfp.tim_ct_b = 0x10;
+ st_mfp.tim_ct_b = 0x10;
udelay(SYNC_DELAY);
if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
{
u32 pmgt;
- u16 pwr_command;
struct pci_dev *pdev = par->pdev;
if (!par->pm_reg)
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
- .remove = pxafb_remove,
+ .remove = __devexit_p(pxafb_remove),
.suspend = pxafb_suspend,
.resume = pxafb_resume,
.driver = {
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire.
+config W1_SLAVE_DS2431
+ tristate "1kb EEPROM family support (DS2431)"
+ help
+ Say Y here if you want to use a 1-wire
+ 1kb EEPROM family device (DS2431)
+
config W1_SLAVE_DS2433
tristate "4kb EEPROM family support (DS2433)"
help
obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o
obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ struct w1_f23_data *f23 = sl->family_data;
+#endif
u8 wrbuf[4];
u8 rdbuf[W1_PAGE_SIZE + 3];
u8 es = (addr + len - 1) & 0x1f;
/* Reset the bus to wake up the EEPROM (this may not be needed) */
w1_reset_bus(sl->master);
-
+#ifdef CONFIG_W1_SLAVE_DS2433_CRC
+ f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+#endif
return 0;
}
err);
return err;
}
+ err = sysdev_suspend(PMSG_SUSPEND);
+ if (err) {
+ printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
+ err);
+ device_power_up(PMSG_RESUME);
+ return err;
+ }
xen_mm_pin_all();
gnttab_suspend();
gnttab_resume();
xen_mm_unpin_all();
+ sysdev_resume();
device_power_up(PMSG_RESUME);
if (!*cancelled) {
# Do not add any filesystems before this line
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
-obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4
+obj-$(CONFIG_EXT2_FS) += ext2/
+# We place ext4 after ext2 so plain ext2 root fs's are mounted using ext2
+# unless explicitly requested by rootfstype
+obj-$(CONFIG_EXT4_FS) += ext4/
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
-obj-$(CONFIG_EXT2_FS) += ext2/
obj-$(CONFIG_CRAMFS) += cramfs/
obj-$(CONFIG_SQUASHFS) += squashfs/
obj-y += ramfs/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
struct bio *bio = NULL;
- void *p;
+ void *uninitialized_var(p);
if (bs) {
p = mempool_alloc(bs->bio_pool, gfp_mask);
*/
struct list_head delalloc_inodes;
+ /* the space_info for where this inode's data allocations are done */
+ struct btrfs_space_info *space_info;
+
/* full 64 bit generation number, struct vfs_inode doesn't have a big
* enough field for this.
*/
*/
u64 delalloc_bytes;
+ /* total number of bytes that may be used for this inode for
+ * delalloc
+ */
+ u64 reserved_bytes;
+
/*
* the size of the file stored in the metadata on disk. data=ordered
* means the in-memory i_size might be larger than the size on disk
struct btrfs_space_info {
u64 flags;
- u64 total_bytes;
- u64 bytes_used;
- u64 bytes_pinned;
- u64 bytes_reserved;
- u64 bytes_readonly;
- int full;
- int force_alloc;
+
+ u64 total_bytes; /* total bytes in the space */
+ u64 bytes_used; /* total bytes used on disk */
+ u64 bytes_pinned; /* total bytes pinned, will be freed when the
+ transaction finishes */
+ u64 bytes_reserved; /* total bytes the allocator has reserved for
+ current allocations */
+ u64 bytes_readonly; /* total bytes that are read only */
+
+ /* delalloc accounting */
+ u64 bytes_delalloc; /* number of bytes reserved for allocation,
+ this space is not necessarily reserved yet
+ by the allocator */
+ u64 bytes_may_use; /* number of bytes that may be used for
+ delalloc */
+
+ int full; /* indicates that we cannot allocate any more
+ chunks for this space */
+ int force_alloc; /* set if we need to force a chunk alloc for
+ this space */
+
struct list_head list;
/* for block groups in our same type */
int btrfs_cleanup_reloc_trees(struct btrfs_root *root);
int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len);
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags);
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
+int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+ struct inode *inode, u64 bytes);
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes);
/* ctree.c */
int btrfs_previous_item(struct btrfs_root *root,
struct btrfs_path *path, u64 min_objectid,
unsigned long btrfs_force_ra(struct address_space *mapping,
struct file_ra_state *ra, struct file *file,
pgoff_t offset, pgoff_t last_index);
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
- int for_del);
int btrfs_page_mkwrite(struct vm_area_struct *vma, struct page *page);
int btrfs_readpage(struct file *file, struct page *page);
void btrfs_delete_inode(struct inode *inode);
u64 bytenr, u64 num_bytes, int alloc,
int mark_free);
+static int do_chunk_alloc(struct btrfs_trans_handle *trans,
+ struct btrfs_root *extent_root, u64 alloc_bytes,
+ u64 flags, int force);
+
static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
{
return (cache->flags & bits) == bits;
found->bytes_pinned = 0;
found->bytes_reserved = 0;
found->bytes_readonly = 0;
+ found->bytes_delalloc = 0;
found->full = 0;
found->force_alloc = 0;
*space_info = found;
return flags;
}
+static u64 btrfs_get_alloc_profile(struct btrfs_root *root, u64 data)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ u64 alloc_profile;
+
+ if (data) {
+ alloc_profile = info->avail_data_alloc_bits &
+ info->data_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
+ } else if (root == root->fs_info->chunk_root) {
+ alloc_profile = info->avail_system_alloc_bits &
+ info->system_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
+ } else {
+ alloc_profile = info->avail_metadata_alloc_bits &
+ info->metadata_alloc_profile;
+ data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
+ }
+
+ return btrfs_reduce_alloc_profile(root, data);
+}
+
+void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *inode)
+{
+ u64 alloc_target;
+
+ alloc_target = btrfs_get_alloc_profile(root, 1);
+ BTRFS_I(inode)->space_info = __find_space_info(root->fs_info,
+ alloc_target);
+}
+
+/*
+ * for now this just makes sure we have at least 5% of our metadata space free
+ * for use.
+ */
+int btrfs_check_metadata_free_space(struct btrfs_root *root)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ struct btrfs_space_info *meta_sinfo;
+ u64 alloc_target, thresh;
+ int committed = 0, ret;
+
+ /* get the space info for where the metadata will live */
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ meta_sinfo = __find_space_info(info, alloc_target);
+
+again:
+ spin_lock(&meta_sinfo->lock);
+ if (!meta_sinfo->full)
+ thresh = meta_sinfo->total_bytes * 80;
+ else
+ thresh = meta_sinfo->total_bytes * 95;
+
+ do_div(thresh, 100);
+
+ if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
+ struct btrfs_trans_handle *trans;
+ if (!meta_sinfo->full) {
+ meta_sinfo->force_alloc = 1;
+ spin_unlock(&meta_sinfo->lock);
+
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ 2 * 1024 * 1024, alloc_target, 0);
+ btrfs_end_transaction(trans, root);
+ goto again;
+ }
+ spin_unlock(&meta_sinfo->lock);
+
+ if (!committed) {
+ committed = 1;
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+ ret = btrfs_commit_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+ return -ENOSPC;
+ }
+ spin_unlock(&meta_sinfo->lock);
+
+ return 0;
+}
+
+/*
+ * This will check the space that the inode allocates from to make sure we have
+ * enough space for bytes.
+ */
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+ int ret = 0, committed = 0;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+again:
+ /* make sure we have enough space to handle the data first */
+ spin_lock(&data_sinfo->lock);
+ if (data_sinfo->total_bytes - data_sinfo->bytes_used -
+ data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
+ data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
+ data_sinfo->bytes_may_use < bytes) {
+ struct btrfs_trans_handle *trans;
+
+ /*
+ * if we don't have enough free bytes in this space then we need
+ * to alloc a new chunk.
+ */
+ if (!data_sinfo->full) {
+ u64 alloc_target;
+
+ data_sinfo->force_alloc = 1;
+ spin_unlock(&data_sinfo->lock);
+
+ alloc_target = btrfs_get_alloc_profile(root, 1);
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ bytes + 2 * 1024 * 1024,
+ alloc_target, 0);
+ btrfs_end_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+ spin_unlock(&data_sinfo->lock);
+
+ /* commit the current transaction and try again */
+ if (!committed) {
+ committed = 1;
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+ ret = btrfs_commit_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+
+ printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
+ ", %llu bytes_used, %llu bytes_reserved, "
+ "%llu bytes_pinned, %llu bytes_readonly, %llu may use"
+ "%llu total\n", bytes, data_sinfo->bytes_delalloc,
+ data_sinfo->bytes_used, data_sinfo->bytes_reserved,
+ data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
+ data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+ return -ENOSPC;
+ }
+ data_sinfo->bytes_may_use += bytes;
+ BTRFS_I(inode)->reserved_bytes += bytes;
+ spin_unlock(&data_sinfo->lock);
+
+ return btrfs_check_metadata_free_space(root);
+}
+
+/*
+ * if there was an error for whatever reason after calling
+ * btrfs_check_data_free_space, call this so we can cleanup the counters.
+ */
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+ struct inode *inode, u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+ spin_lock(&data_sinfo->lock);
+ data_sinfo->bytes_may_use -= bytes;
+ BTRFS_I(inode)->reserved_bytes -= bytes;
+ spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are adding a delalloc extent to the inode's io_tree */
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+
+ /* get the space info for where this inode will be storing its data */
+ data_sinfo = BTRFS_I(inode)->space_info;
+
+ /* make sure we have enough space to handle the data first */
+ spin_lock(&data_sinfo->lock);
+ data_sinfo->bytes_delalloc += bytes;
+
+ /*
+ * we are adding a delalloc extent without calling
+ * btrfs_check_data_free_space first. This happens on a weird
+ * writepage condition, but shouldn't hurt our accounting
+ */
+ if (unlikely(bytes > BTRFS_I(inode)->reserved_bytes)) {
+ data_sinfo->bytes_may_use -= BTRFS_I(inode)->reserved_bytes;
+ BTRFS_I(inode)->reserved_bytes = 0;
+ } else {
+ data_sinfo->bytes_may_use -= bytes;
+ BTRFS_I(inode)->reserved_bytes -= bytes;
+ }
+
+ spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are clearing an delalloc extent from the inode's io_tree */
+void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *info;
+
+ info = BTRFS_I(inode)->space_info;
+
+ spin_lock(&info->lock);
+ info->bytes_delalloc -= bytes;
+ spin_unlock(&info->lock);
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
(unsigned long long)(info->total_bytes - info->bytes_used -
info->bytes_pinned - info->bytes_reserved),
(info->full) ? "" : "not ");
+ printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
+ " may_use=%llu, used=%llu\n", info->total_bytes,
+ info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
+ info->bytes_used);
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
{
int ret;
u64 search_start = 0;
- u64 alloc_profile;
struct btrfs_fs_info *info = root->fs_info;
- if (data) {
- alloc_profile = info->avail_data_alloc_bits &
- info->data_alloc_profile;
- data = BTRFS_BLOCK_GROUP_DATA | alloc_profile;
- } else if (root == root->fs_info->chunk_root) {
- alloc_profile = info->avail_system_alloc_bits &
- info->system_alloc_profile;
- data = BTRFS_BLOCK_GROUP_SYSTEM | alloc_profile;
- } else {
- alloc_profile = info->avail_metadata_alloc_bits &
- info->metadata_alloc_profile;
- data = BTRFS_BLOCK_GROUP_METADATA | alloc_profile;
- }
+ data = btrfs_get_alloc_profile(root, data);
again:
- data = btrfs_reduce_alloc_profile(root, data);
/*
* the only place that sets empty_size is btrfs_realloc_node, which
* is not called recursively on allocations
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_check_free_space(root, write_bytes, 0);
+ ret = btrfs_check_data_free_space(root, inode, write_bytes);
if (ret)
goto out;
ret = prepare_pages(root, file, pages, num_pages,
pos, first_index, last_index,
write_bytes);
- if (ret)
+ if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
goto out;
+ }
ret = btrfs_copy_from_user(pos, num_pages,
write_bytes, pages, buf);
if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
btrfs_drop_pages(pages, num_pages);
goto out;
}
ret = dirty_and_release_pages(NULL, root, file, pages,
num_pages, pos, write_bytes);
btrfs_drop_pages(pages, num_pages);
- if (ret)
+ if (ret) {
+ btrfs_free_reserved_data_space(root, inode,
+ write_bytes);
goto out;
+ }
if (will_write) {
btrfs_fdatawrite_range(inode->i_mapping, pos,
}
out:
mutex_unlock(&inode->i_mutex);
+ if (ret)
+ err = ret;
out_nolock:
kfree(pages);
/*
* ok we haven't committed the transaction yet, lets do a commit
*/
- if (file->private_data)
+ if (file && file->private_data)
btrfs_ioctl_trans_end(file);
trans = btrfs_start_transaction(root, 1);
goto out;
}
- ret = btrfs_log_dentry_safe(trans, root, file->f_dentry);
+ ret = btrfs_log_dentry_safe(trans, root, dentry);
if (ret < 0)
goto out;
* file again, but that will end up using the synchronization
* inside btrfs_sync_log to keep things safe.
*/
- mutex_unlock(&file->f_dentry->d_inode->i_mutex);
+ mutex_unlock(&dentry->d_inode->i_mutex);
if (ret > 0) {
ret = btrfs_commit_transaction(trans, root);
btrfs_sync_log(trans, root);
ret = btrfs_end_transaction(trans, root);
}
- mutex_lock(&file->f_dentry->d_inode->i_mutex);
+ mutex_lock(&dentry->d_inode->i_mutex);
out:
return ret > 0 ? EIO : ret;
}
return err;
}
-/*
- * a very lame attempt at stopping writes when the FS is 85% full. There
- * are countless ways this is incorrect, but it is better than nothing.
- */
-int btrfs_check_free_space(struct btrfs_root *root, u64 num_required,
- int for_del)
-{
- u64 total;
- u64 used;
- u64 thresh;
- int ret = 0;
-
- spin_lock(&root->fs_info->delalloc_lock);
- total = btrfs_super_total_bytes(&root->fs_info->super_copy);
- used = btrfs_super_bytes_used(&root->fs_info->super_copy);
- if (for_del)
- thresh = total * 90;
- else
- thresh = total * 85;
-
- do_div(thresh, 100);
-
- if (used + root->fs_info->delalloc_bytes + num_required > thresh)
- ret = -ENOSPC;
- spin_unlock(&root->fs_info->delalloc_lock);
- return ret;
-}
-
/*
* this does all the hard work for inserting an inline extent into
* the btree. The caller should have done a btrfs_drop_extents so that
*/
if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+ btrfs_delalloc_reserve_space(root, inode, end - start + 1);
spin_lock(&root->fs_info->delalloc_lock);
BTRFS_I(inode)->delalloc_bytes += end - start + 1;
root->fs_info->delalloc_bytes += end - start + 1;
(unsigned long long)end - start + 1,
(unsigned long long)
root->fs_info->delalloc_bytes);
+ btrfs_delalloc_free_space(root, inode, (u64)-1);
root->fs_info->delalloc_bytes = 0;
BTRFS_I(inode)->delalloc_bytes = 0;
} else {
+ btrfs_delalloc_free_space(root, inode,
+ end - start + 1);
root->fs_info->delalloc_bytes -= end - start + 1;
BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
}
root = BTRFS_I(dir)->root;
- ret = btrfs_check_free_space(root, 1, 1);
- if (ret)
- goto fail;
-
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
-fail:
btrfs_btree_balance_dirty(root, nr);
return ret;
}
return -ENOTEMPTY;
}
- ret = btrfs_check_free_space(root, 1, 1);
- if (ret)
- goto fail;
-
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
fail_trans:
nr = trans->blocks_used;
ret = btrfs_end_transaction_throttle(trans, root);
-fail:
btrfs_btree_balance_dirty(root, nr);
if (ret && !err)
if (size <= hole_start)
return 0;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
return err;
bi->last_trans = 0;
bi->logged_trans = 0;
bi->delalloc_bytes = 0;
+ bi->reserved_bytes = 0;
bi->disk_i_size = 0;
bi->flags = 0;
bi->index_cnt = (u64)-1;
inode->i_ino = args->ino;
init_btrfs_i(inode);
BTRFS_I(inode)->root = args->root;
+ btrfs_set_inode_space_info(args->root, inode);
return 0;
}
BTRFS_I(inode)->index_cnt = 2;
BTRFS_I(inode)->root = root;
BTRFS_I(inode)->generation = trans->transid;
+ btrfs_set_inode_space_info(root, inode);
if (mode & S_IFDIR)
owner = 0;
if (!new_valid_dev(rdev))
return -EINVAL;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
u64 objectid;
u64 index = 0;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
trans = btrfs_start_transaction(root, 1);
return -ENOENT;
btrfs_inc_nlink(inode);
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto fail;
err = btrfs_set_inode_index(dir, &index);
u64 index = 0;
unsigned long nr = 1;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto out_unlock;
u64 page_start;
u64 page_end;
- ret = btrfs_check_free_space(root, PAGE_CACHE_SIZE, 0);
+ ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
if (ret)
goto out;
if ((page->mapping != inode->i_mapping) ||
(page_start >= size)) {
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
/* page got truncated out from underneath us */
goto out_unlock;
}
if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -EXDEV;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto out_unlock;
if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
return -ENAMETOOLONG;
- err = btrfs_check_free_space(root, 1, 0);
+ err = btrfs_check_metadata_free_space(root);
if (err)
goto out_fail;
u64 index = 0;
unsigned long nr = 1;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto fail_commit;
if (!root->ref_cows)
return -EINVAL;
- ret = btrfs_check_free_space(root, 1, 0);
+ ret = btrfs_check_metadata_free_space(root);
if (ret)
goto fail_unlock;
unsigned long i;
int ret;
- ret = btrfs_check_free_space(root, inode->i_size, 0);
+ ret = btrfs_check_data_free_space(root, inode, inode->i_size);
if (ret)
return -ENOSPC;
+Version 1.57
+------------
+Improve support for multiple security contexts to the same server. We
+used to use the same "vcnumber" for all connections which could cause
+the server to treat subsequent connections, especially those that
+are authenticated as guest, as reconnections, invalidating the earlier
+user's smb session. This fix allows cifs to mount multiple times to the
+same server with different userids without risking invalidating earlier
+established security contexts.
+
Version 1.56
------------
Add "forcemandatorylock" mount option to allow user to use mandatory
top of the share. Fix problem in 2.6.28 resolving DFS paths to
Samba servers (worked to Windows). Fix rmdir so that pending search
(readdir) requests do not get invalid results which include the now
-removed directory.
+removed directory. Fix oops in cifs_dfs_ref.c when prefixpath is not reachable
+when using DFS. Add better file create support to servers which support
+the CIFS POSIX protocol extensions (this adds support for new flags
+on create, and improves semantics for write of locked ranges).
Version 1.55
------------
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.56"
+#define CIFS_VERSION "1.57"
#endif /* _CIFSFS_H */
/* multiplexed reads or writes */
unsigned int maxBuf; /* maxBuf specifies the maximum */
/* message size the server can send or receive for non-raw SMBs */
- unsigned int maxRw; /* maxRw specifies the maximum */
+ unsigned int max_rw; /* maxRw specifies the maximum */
/* message size the server can send or receive for */
/* SMB_COM_WRITE_RAW or SMB_COM_READ_RAW. */
+ unsigned int max_vcs; /* maximum number of smb sessions, at least
+ those that can be specified uniquely with
+ vcnumbers */
char sessid[4]; /* unique token id for this session */
/* (returned on Negotiate */
int capabilities; /* allow selective disabling of caps by smb sess */
unsigned overrideSecFlg; /* if non-zero override global sec flags */
__u16 ipc_tid; /* special tid for connection to IPC share */
__u16 flags;
+ __u16 vcnum;
char *serverOS; /* name of operating system underlying server */
char *serverNOS; /* name of network operating system of server */
char *serverDomain; /* security realm of server */
#define GetXid() (int)_GetXid(); cFYI(1,("CIFS VFS: in %s as Xid: %d with uid: %d",__func__, xid,current_fsuid()));
#define FreeXid(curr_xid) {_FreeXid(curr_xid); cFYI(1,("CIFS VFS: leaving %s (xid = %d) rc = %d",__func__,curr_xid,(int)rc));}
extern char *build_path_from_dentry(struct dentry *);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
/* extern void renew_parental_timestamps(struct dentry *direntry);*/
extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *,
extern __le64 cnvrtDosCifsTm(__u16 date, __u16 time);
extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
+extern void posix_fill_in_inode(struct inode *tmp_inode,
+ FILE_UNIX_BASIC_INFO *pData, int isNewInode);
+extern struct inode *cifs_new_inode(struct super_block *sb, __u64 *inum);
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
FILE_ALL_INFO *pfile_info,
server->maxReq = le16_to_cpu(rsp->MaxMpxCount);
server->maxBuf = min((__u32)le16_to_cpu(rsp->MaxBufSize),
(__u32)CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
+ server->max_vcs = le16_to_cpu(rsp->MaxNumberVcs);
GETU32(server->sessid) = le32_to_cpu(rsp->SessionKey);
/* even though we do not use raw we might as well set this
accurately, in case we ever find a need for it */
if ((le16_to_cpu(rsp->RawMode) & RAW_ENABLE) == RAW_ENABLE) {
- server->maxRw = 0xFF00;
+ server->max_rw = 0xFF00;
server->capabilities = CAP_MPX_MODE | CAP_RAW_MODE;
} else {
- server->maxRw = 0;/* we do not need to use raw anyway */
+ server->max_rw = 0;/* do not need to use raw anyway */
server->capabilities = CAP_MPX_MODE;
}
tmp = (__s16)le16_to_cpu(rsp->ServerTimeZone);
/* probably no need to store and check maxvcs */
server->maxBuf = min(le32_to_cpu(pSMBr->MaxBufferSize),
(__u32) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
- server->maxRw = le32_to_cpu(pSMBr->MaxRawSize);
+ server->max_rw = le32_to_cpu(pSMBr->MaxRawSize);
cFYI(DBG2, ("Max buf = %d", ses->server->maxBuf));
GETU32(ses->server->sessid) = le32_to_cpu(pSMBr->SessionKey);
server->capabilities = le32_to_cpu(pSMBr->Capabilities);
#include <linux/string.h>
#include <linux/list.h>
#include <linux/wait.h>
-#include <linux/ipv6.h>
#include <linux/pagemap.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
#include <linux/freezer.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
+#include <net/ipv6.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsproto.h"
server->addr.sockAddr.sin_addr.s_addr))
continue;
else if (addr->ss_family == AF_INET6 &&
- memcmp(&server->addr.sockAddr6.sin6_addr,
- &addr6->sin6_addr, sizeof(addr6->sin6_addr)))
+ !ipv6_addr_equal(&server->addr.sockAddr6.sin6_addr,
+ &addr6->sin6_addr))
continue;
++server->srv_count;
"mount option supported"));
}
+static int
+is_path_accessible(int xid, struct cifsTconInfo *tcon,
+ struct cifs_sb_info *cifs_sb, const char *full_path)
+{
+ int rc;
+ __u64 inode_num;
+ FILE_ALL_INFO *pfile_info;
+
+ rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc != -EOPNOTSUPP)
+ return rc;
+
+ pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
+ if (pfile_info == NULL)
+ return -ENOMEM;
+
+ rc = CIFSSMBQPathInfo(xid, tcon, full_path, pfile_info,
+ 0 /* not legacy */, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ kfree(pfile_info);
+ return rc;
+}
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
char *mount_data, const char *devname)
struct cifsSesInfo *pSesInfo = NULL;
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
+ char *full_path;
xid = GetXid();
cifs_sb->rsize = min(cifs_sb->rsize,
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
+ if (!rc && cifs_sb->prepathlen) {
+ /* build_path_to_root works only when we have a valid tcon */
+ full_path = cifs_build_path_to_root(cifs_sb);
+ if (full_path == NULL) {
+ rc = -ENOMEM;
+ goto mount_fail_check;
+ }
+ rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
+ if (rc) {
+ cERROR(1, ("Path %s in not accessible: %d",
+ full_path, rc));
+ kfree(full_path);
+ goto mount_fail_check;
+ }
+ kfree(full_path);
+ }
+
/* volume_info->password is freed above when existing session found
(in which case it is not needed anymore) but when new sesion is created
the password ptr is put in the new session structure (in which case the
*
* vfs operations that deal with dentries
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
return full_path;
}
+static int cifs_posix_open(char *full_path, struct inode **pinode,
+ struct super_block *sb, int mode, int oflags,
+ int *poplock, __u16 *pnetfid, int xid)
+{
+ int rc;
+ __u32 oplock;
+ FILE_UNIX_BASIC_INFO *presp_data;
+ __u32 posix_flags = 0;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+
+ cFYI(1, ("posix open %s", full_path));
+
+ presp_data = kzalloc(sizeof(FILE_UNIX_BASIC_INFO), GFP_KERNEL);
+ if (presp_data == NULL)
+ return -ENOMEM;
+
+/* So far cifs posix extensions can only map the following flags.
+ There are other valid fmode oflags such as FMODE_LSEEK, FMODE_PREAD, but
+ so far we do not seem to need them, and we can treat them as local only */
+ if ((oflags & (FMODE_READ | FMODE_WRITE)) ==
+ (FMODE_READ | FMODE_WRITE))
+ posix_flags = SMB_O_RDWR;
+ else if (oflags & FMODE_READ)
+ posix_flags = SMB_O_RDONLY;
+ else if (oflags & FMODE_WRITE)
+ posix_flags = SMB_O_WRONLY;
+ if (oflags & O_CREAT)
+ posix_flags |= SMB_O_CREAT;
+ if (oflags & O_EXCL)
+ posix_flags |= SMB_O_EXCL;
+ if (oflags & O_TRUNC)
+ posix_flags |= SMB_O_TRUNC;
+ if (oflags & O_APPEND)
+ posix_flags |= SMB_O_APPEND;
+ if (oflags & O_SYNC)
+ posix_flags |= SMB_O_SYNC;
+ if (oflags & O_DIRECTORY)
+ posix_flags |= SMB_O_DIRECTORY;
+ if (oflags & O_NOFOLLOW)
+ posix_flags |= SMB_O_NOFOLLOW;
+ if (oflags & O_DIRECT)
+ posix_flags |= SMB_O_DIRECT;
+
+
+ rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
+ pnetfid, presp_data, &oplock, full_path,
+ cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (rc)
+ goto posix_open_ret;
+
+ if (presp_data->Type == cpu_to_le32(-1))
+ goto posix_open_ret; /* open ok, caller does qpathinfo */
+
+ /* get new inode and set it up */
+ if (!pinode)
+ goto posix_open_ret; /* caller does not need info */
+
+ *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+
+ /* We do not need to close the file if new_inode fails since
+ the caller will retry qpathinfo as long as inode is null */
+ if (*pinode == NULL)
+ goto posix_open_ret;
+
+ posix_fill_in_inode(*pinode, presp_data, 1);
+
+posix_open_ret:
+ kfree(presp_data);
+ return rc;
+}
+
static void setup_cifs_dentry(struct cifsTconInfo *tcon,
struct dentry *direntry,
struct inode *newinode)
int xid;
int create_options = CREATE_NOT_DIR;
int oplock = 0;
- /* BB below access is too much for the mknod to request */
+ int oflags;
+ /*
+ * BB below access is probably too much for mknod to request
+ * but we have to do query and setpathinfo so requesting
+ * less could fail (unless we want to request getatr and setatr
+ * permissions (only). At least for POSIX we do not have to
+ * request so much.
+ */
int desiredAccess = GENERIC_READ | GENERIC_WRITE;
__u16 fileHandle;
struct cifs_sb_info *cifs_sb;
}
mode &= ~current->fs->umask;
+ if (oplockEnabled)
+ oplock = REQ_OPLOCK;
- if (nd && (nd->flags & LOOKUP_OPEN)) {
- int oflags = nd->intent.open.flags;
+ if (nd && (nd->flags & LOOKUP_OPEN))
+ oflags = nd->intent.open.flags;
+ else
+ oflags = FMODE_READ;
+
+ if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
+ (CIFS_UNIX_POSIX_PATH_OPS_CAP &
+ le64_to_cpu(tcon->fsUnixInfo.Capability))) {
+ rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+ mode, oflags, &oplock, &fileHandle, xid);
+ /* EIO could indicate that (posix open) operation is not
+ supported, despite what server claimed in capability
+ negotation. EREMOTE indicates DFS junction, which is not
+ handled in posix open */
+
+ if ((rc == 0) && (newinode == NULL))
+ goto cifs_create_get_file_info; /* query inode info */
+ else if (rc == 0) /* success, no need to query */
+ goto cifs_create_set_dentry;
+ else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ (rc != -EOPNOTSUPP)) /* path not found or net err */
+ goto cifs_create_out;
+ /* else fallthrough to retry, using older open call, this is
+ case where server does not support this SMB level, and
+ falsely claims capability (also get here for DFS case
+ which should be rare for path not covered on files) */
+ }
+ if (nd && (nd->flags & LOOKUP_OPEN)) {
+ /* if the file is going to stay open, then we
+ need to set the desired access properly */
desiredAccess = 0;
if (oflags & FMODE_READ)
- desiredAccess |= GENERIC_READ;
+ desiredAccess |= GENERIC_READ; /* is this too little? */
if (oflags & FMODE_WRITE) {
desiredAccess |= GENERIC_WRITE;
if (!(oflags & FMODE_READ))
/* BB add processing to set equivalent of mode - e.g. via CreateX with
ACLs */
- if (oplockEnabled)
- oplock = REQ_OPLOCK;
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (buf == NULL) {
}
if (rc) {
cFYI(1, ("cifs_create returned 0x%x", rc));
- } else {
- /* If Open reported that we actually created a file
- then we now have to set the mode if possible */
- if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
- struct cifs_unix_set_info_args args = {
+ goto cifs_create_out;
+ }
+
+ /* If Open reported that we actually created a file
+ then we now have to set the mode if possible */
+ if ((tcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
+ struct cifs_unix_set_info_args args = {
.mode = mode,
.ctime = NO_CHANGE_64,
.atime = NO_CHANGE_64,
.mtime = NO_CHANGE_64,
.device = 0,
- };
+ };
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
- args.uid = (__u64) current_fsuid();
- if (inode->i_mode & S_ISGID)
- args.gid = (__u64) inode->i_gid;
- else
- args.gid = (__u64) current_fsgid();
- } else {
- args.uid = NO_CHANGE_64;
- args.gid = NO_CHANGE_64;
- }
- CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+ args.uid = (__u64) current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ args.gid = (__u64) inode->i_gid;
+ else
+ args.gid = (__u64) current_fsgid();
} else {
- /* BB implement mode setting via Windows security
- descriptors e.g. */
- /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/
-
- /* Could set r/o dos attribute if mode & 0222 == 0 */
+ args.uid = NO_CHANGE_64;
+ args.gid = NO_CHANGE_64;
}
+ CIFSSMBUnixSetInfo(xid, tcon, full_path, &args,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ } else {
+ /* BB implement mode setting via Windows security
+ descriptors e.g. */
+ /* CIFSSMBWinSetPerms(xid,tcon,path,mode,-1,-1,nls);*/
- /* server might mask mode so we have to query for it */
- if (tcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newinode, full_path,
- inode->i_sb, xid);
- else {
- rc = cifs_get_inode_info(&newinode, full_path,
- buf, inode->i_sb, xid,
- &fileHandle);
- if (newinode) {
- if (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_DYNPERM)
- newinode->i_mode = mode;
- if ((oplock & CIFS_CREATE_ACTION) &&
- (cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_SET_UID)) {
- newinode->i_uid = current_fsuid();
- if (inode->i_mode & S_ISGID)
- newinode->i_gid =
- inode->i_gid;
- else
- newinode->i_gid =
- current_fsgid();
- }
+ /* Could set r/o dos attribute if mode & 0222 == 0 */
+ }
+
+cifs_create_get_file_info:
+ /* server might mask mode so we have to query for it */
+ if (tcon->unix_ext)
+ rc = cifs_get_inode_info_unix(&newinode, full_path,
+ inode->i_sb, xid);
+ else {
+ rc = cifs_get_inode_info(&newinode, full_path, buf,
+ inode->i_sb, xid, &fileHandle);
+ if (newinode) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ newinode->i_mode = mode;
+ if ((oplock & CIFS_CREATE_ACTION) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+ newinode->i_uid = current_fsuid();
+ if (inode->i_mode & S_ISGID)
+ newinode->i_gid = inode->i_gid;
+ else
+ newinode->i_gid = current_fsgid();
}
}
+ }
- if (rc != 0) {
- cFYI(1, ("Create worked, get_inode_info failed rc = %d",
- rc));
- } else
- setup_cifs_dentry(tcon, direntry, newinode);
-
- if ((nd == NULL /* nfsd case - nfs srv does not set nd */) ||
- (!(nd->flags & LOOKUP_OPEN))) {
- /* mknod case - do not leave file open */
- CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
- struct cifsFileInfo *pCifsFile =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
- if (pCifsFile == NULL)
- goto cifs_create_out;
- pCifsFile->netfid = fileHandle;
- pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = false;
- pCifsFile->closePend = false;
- init_MUTEX(&pCifsFile->fh_sem);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
-
- /* set the following in open now
+cifs_create_set_dentry:
+ if (rc == 0)
+ setup_cifs_dentry(tcon, direntry, newinode);
+ else
+ cFYI(1, ("Create worked, get_inode_info failed rc = %d", rc));
+
+ /* nfsd case - nfs srv does not set nd */
+ if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
+ /* mknod case - do not leave file open */
+ CIFSSMBClose(xid, tcon, fileHandle);
+ } else if (newinode) {
+ struct cifsFileInfo *pCifsFile =
+ kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ if (pCifsFile == NULL)
+ goto cifs_create_out;
+ pCifsFile->netfid = fileHandle;
+ pCifsFile->pid = current->tgid;
+ pCifsFile->pInode = newinode;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
+ init_MUTEX(&pCifsFile->fh_sem);
+ mutex_init(&pCifsFile->lock_mutex);
+ INIT_LIST_HEAD(&pCifsFile->llist);
+ atomic_set(&pCifsFile->wrtPending, 0);
+
+ /* set the following in open now
pCifsFile->pfile = file; */
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(newinode);
- if (pCifsInode) {
- /* if readable file instance put first in list*/
- if (write_only) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, ("Exclusive Oplock inode %p",
- newinode));
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
+ write_lock(&GlobalSMBSeslock);
+ list_add(&pCifsFile->tlist, &tcon->openFileList);
+ pCifsInode = CIFS_I(newinode);
+ if (pCifsInode) {
+ /* if readable file instance put first in list*/
+ if (write_only) {
+ list_add_tail(&pCifsFile->flist,
+ &pCifsInode->openFileList);
+ } else {
+ list_add(&pCifsFile->flist,
+ &pCifsInode->openFileList);
}
- write_unlock(&GlobalSMBSeslock);
+ if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
+ cFYI(1, ("Exclusive Oplock inode %p",
+ newinode));
+ } else if ((oplock & 0xF) == OPLOCK_READ)
+ pCifsInode->clientCanCacheRead = true;
}
+ write_unlock(&GlobalSMBSeslock);
}
cifs_create_out:
kfree(buf);
pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
}
+/**
+ * cifs_new inode - create new inode, initialize, and hash it
+ * @sb - pointer to superblock
+ * @inum - if valid pointer and serverino is enabled, replace i_ino with val
+ *
+ * Create a new inode, initialize it for CIFS and hash it. Returns the new
+ * inode or NULL if one couldn't be allocated.
+ *
+ * If the share isn't mounted with "serverino" or inum is a NULL pointer then
+ * we'll just use the inode number assigned by new_inode(). Note that this can
+ * mean i_ino collisions since the i_ino assigned by new_inode is not
+ * guaranteed to be unique.
+ */
+struct inode *
+cifs_new_inode(struct super_block *sb, __u64 *inum)
+{
+ struct inode *inode;
+
+ inode = new_inode(sb);
+ if (inode == NULL)
+ return NULL;
+
+ /*
+ * BB: Is i_ino == 0 legal? Here, we assume that it is. If it isn't we
+ * stop passing inum as ptr. Are there sanity checks we can use to
+ * ensure that the server is really filling in that field? Also,
+ * if serverino is disabled, perhaps we should be using iunique()?
+ */
+ if (inum && (CIFS_SB(sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM))
+ inode->i_ino = (unsigned long) *inum;
+
+ /*
+ * must set this here instead of cifs_alloc_inode since VFS will
+ * clobber i_flags
+ */
+ if (sb->s_flags & MS_NOATIME)
+ inode->i_flags |= S_NOATIME | S_NOCMTIME;
+
+ insert_inode_hash(inode);
+
+ return inode;
+}
+
int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *full_path, struct super_block *sb, int xid)
{
/* get new inode */
if (*pinode == NULL) {
- *pinode = new_inode(sb);
+ *pinode = cifs_new_inode(sb, &find_data.UniqueId);
if (*pinode == NULL) {
rc = -ENOMEM;
goto cgiiu_exit;
}
- /* Is an i_ino of zero legal? */
- /* note ino incremented to unique num in new_inode */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
-
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(*pinode);
}
inode = *pinode;
/* get new inode */
if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
+ __u64 inode_num;
+ __u64 *pinum = &inode_num;
+
/* Is an i_ino of zero legal? Can we use that to check
if the server supports returning inode numbers? Are
there other sanity checks we can use to ensure that
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
int rc1 = 0;
- __u64 inode_num;
rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- full_path, &inode_num,
+ full_path, pinum,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc1) {
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ pinum = NULL;
/* BB EOPNOSUPP disable SERVER_INUM? */
- } else /* do we need cast or hash to ino? */
- (*pinode)->i_ino = inode_num;
- } /* else ino incremented to unique num in new_inode*/
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- insert_inode_hash(*pinode);
+ }
+ } else {
+ pinum = NULL;
+ }
+
+ *pinode = cifs_new_inode(sb, pinum);
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgii_exit;
+ }
}
inode = *pinode;
cifsInfo = CIFS_I(inode);
.lookup = cifs_lookup,
};
-static char *build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
{
int pplen = cifs_sb->prepathlen;
int dfsplen;
return inode;
cifs_sb = CIFS_SB(inode->i_sb);
- full_path = build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
return rc;
}
-static void posix_fill_in_inode(struct inode *tmp_inode,
+void posix_fill_in_inode(struct inode *tmp_inode,
FILE_UNIX_BASIC_INFO *pData, int isNewInode)
{
struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
else
direntry->d_op = &cifs_dentry_ops;
- newinode = new_inode(inode->i_sb);
+ newinode = cifs_new_inode(inode->i_sb,
+ &pInfo->UniqueId);
if (newinode == NULL) {
kfree(pInfo);
goto mkdir_get_info;
}
- /* Is an i_ino of zero legal? */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- newinode->i_ino =
- (unsigned long)pInfo->UniqueId;
- } /* note ino incremented to unique num in new_inode */
- if (inode->i_sb->s_flags & MS_NOATIME)
- newinode->i_flags |= S_NOATIME | S_NOCMTIME;
newinode->i_nlink = 2;
-
- insert_inode_hash(newinode);
d_instantiate(direntry, newinode);
/* we already checked in POSIXCreate whether
}
#endif /* DEBUG2 */
-/* Returns one if new inode created (which therefore needs to be hashed) */
+/* Returns 1 if new inode created, 2 if both dentry and inode were */
/* Might check in the future if inode number changed so we can rehash inode */
-static int construct_dentry(struct qstr *qstring, struct file *file,
- struct inode **ptmp_inode, struct dentry **pnew_dentry)
+static int
+construct_dentry(struct qstr *qstring, struct file *file,
+ struct inode **ptmp_inode, struct dentry **pnew_dentry,
+ __u64 *inum)
{
- struct dentry *tmp_dentry;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ struct dentry *tmp_dentry = NULL;
+ struct super_block *sb = file->f_path.dentry->d_sb;
int rc = 0;
cFYI(1, ("For %s", qstring->name));
- cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- pTcon = cifs_sb->tcon;
qstring->hash = full_name_hash(qstring->name, qstring->len);
tmp_dentry = d_lookup(file->f_path.dentry, qstring);
if (tmp_dentry) {
+ /* BB: overwrite old name? i.e. tmp_dentry->d_name and
+ * tmp_dentry->d_name.len??
+ */
cFYI(0, ("existing dentry with inode 0x%p",
tmp_dentry->d_inode));
*ptmp_inode = tmp_dentry->d_inode;
-/* BB overwrite old name? i.e. tmp_dentry->d_name and tmp_dentry->d_name.len??*/
if (*ptmp_inode == NULL) {
- *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
+ *ptmp_inode = cifs_new_inode(sb, inum);
if (*ptmp_inode == NULL)
return rc;
rc = 1;
}
- if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
- (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
} else {
tmp_dentry = d_alloc(file->f_path.dentry, qstring);
if (tmp_dentry == NULL) {
return rc;
}
- *ptmp_inode = new_inode(file->f_path.dentry->d_sb);
- if (pTcon->nocase)
+ if (CIFS_SB(sb)->tcon->nocase)
tmp_dentry->d_op = &cifs_ci_dentry_ops;
else
tmp_dentry->d_op = &cifs_dentry_ops;
+
+ *ptmp_inode = cifs_new_inode(sb, inum);
if (*ptmp_inode == NULL)
return rc;
- if (file->f_path.dentry->d_sb->s_flags & MS_NOATIME)
- (*ptmp_inode)->i_flags |= S_NOATIME | S_NOCMTIME;
rc = 2;
}
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, ino_t *pinum)
+ struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
len = strnlen(filename, PATH_MAX);
}
- /* BB fixme - hash low and high 32 bits if not 64 bit arch BB */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
- *pinum = pFindData->UniqueId;
+ *pinum = pFindData->UniqueId;
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
struct qstr qstring;
struct cifsFileInfo *pCifsF;
unsigned int obj_type;
- ino_t inum;
+ __u64 inum;
struct cifs_sb_info *cifs_sb;
struct inode *tmp_inode;
struct dentry *tmp_dentry;
if (rc)
return rc;
- rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry);
+ /* only these two infolevels return valid inode numbers */
+ if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_UNIX ||
+ pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+ &inum);
+ else
+ rc = construct_dentry(&qstring, file, &tmp_inode, &tmp_dentry,
+ NULL);
+
if ((tmp_inode == NULL) || (tmp_dentry == NULL))
return -ENOMEM;
- if (rc) {
- /* inode created, we need to hash it with right inode number */
- if (inum != 0) {
- /* BB fixme - hash the 2 32 quantities bits together if
- * necessary BB */
- tmp_inode->i_ino = inum;
- }
- insert_inode_hash(tmp_inode);
- }
-
/* we pass in rc below, indicating whether it is a new inode,
so we can figure out whether to invalidate the inode cached
data if the file has changed */
extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
unsigned char *p24);
+/* Checks if this is the first smb session to be reconnected after
+ the socket has been reestablished (so we know whether to use vc 0).
+ Called while holding the cifs_tcp_ses_lock, so do not block */
+static bool is_first_ses_reconnect(struct cifsSesInfo *ses)
+{
+ struct list_head *tmp;
+ struct cifsSesInfo *tmp_ses;
+
+ list_for_each(tmp, &ses->server->smb_ses_list) {
+ tmp_ses = list_entry(tmp, struct cifsSesInfo,
+ smb_ses_list);
+ if (tmp_ses->need_reconnect == false)
+ return false;
+ }
+ /* could not find a session that was already connected,
+ this must be the first one we are reconnecting */
+ return true;
+}
+
+/*
+ * vc number 0 is treated specially by some servers, and should be the
+ * first one we request. After that we can use vcnumbers up to maxvcs,
+ * one for each smb session (some Windows versions set maxvcs incorrectly
+ * so maxvc=1 can be ignored). If we have too many vcs, we can reuse
+ * any vc but zero (some servers reset the connection on vcnum zero)
+ *
+ */
+static __le16 get_next_vcnum(struct cifsSesInfo *ses)
+{
+ __u16 vcnum = 0;
+ struct list_head *tmp;
+ struct cifsSesInfo *tmp_ses;
+ __u16 max_vcs = ses->server->max_vcs;
+ __u16 i;
+ int free_vc_found = 0;
+
+ /* Quoting the MS-SMB specification: "Windows-based SMB servers set this
+ field to one but do not enforce this limit, which allows an SMB client
+ to establish more virtual circuits than allowed by this value ... but
+ other server implementations can enforce this limit." */
+ if (max_vcs < 2)
+ max_vcs = 0xFFFF;
+
+ write_lock(&cifs_tcp_ses_lock);
+ if ((ses->need_reconnect) && is_first_ses_reconnect(ses))
+ goto get_vc_num_exit; /* vcnum will be zero */
+ for (i = ses->server->srv_count - 1; i < max_vcs; i++) {
+ if (i == 0) /* this is the only connection, use vc 0 */
+ break;
+
+ free_vc_found = 1;
+
+ list_for_each(tmp, &ses->server->smb_ses_list) {
+ tmp_ses = list_entry(tmp, struct cifsSesInfo,
+ smb_ses_list);
+ if (tmp_ses->vcnum == i) {
+ free_vc_found = 0;
+ break; /* found duplicate, try next vcnum */
+ }
+ }
+ if (free_vc_found)
+ break; /* we found a vcnumber that will work - use it */
+ }
+
+ if (i == 0)
+ vcnum = 0; /* for most common case, ie if one smb session, use
+ vc zero. Also for case when no free vcnum, zero
+ is safest to send (some clients only send zero) */
+ else if (free_vc_found == 0)
+ vcnum = 1; /* we can not reuse vc=0 safely, since some servers
+ reset all uids on that, but 1 is ok. */
+ else
+ vcnum = i;
+ ses->vcnum = vcnum;
+get_vc_num_exit:
+ write_unlock(&cifs_tcp_ses_lock);
+
+ return le16_to_cpu(vcnum);
+}
+
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
{
__u32 capabilities = 0;
/* init fields common to all four types of SessSetup */
- /* note that header is initialized to zero in header_assemble */
+ /* Note that offsets for first seven fields in req struct are same */
+ /* in CIFS Specs so does not matter which of 3 forms of struct */
+ /* that we use in next few lines */
+ /* Note that header is initialized to zero in header_assemble */
pSMB->req.AndXCommand = 0xFF;
pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
+ pSMB->req.VcNumber = get_next_vcnum(ses);
/* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */
if (ses->capabilities & CAP_UNIX)
capabilities |= CAP_UNIX;
- /* BB check whether to init vcnum BB */
return capabilities;
}
kfree(ses->serverOS);
/* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc(4 * len, GFP_KERNEL);
+ ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
if (ses->serverOS != NULL)
cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
data += 2 * (len + 1);
return rc;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(4 * len, GFP_KERNEL); /* BB this is wrong length FIXME BB */
+ ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
if (ses->serverNOS != NULL) {
cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
nls_cp);
/* 0x00 */
COMPATIBLE_IOCTL(FIBMAP)
COMPATIBLE_IOCTL(FIGETBSZ)
+/* 'X' - originally XFS but some now in the VFS */
+COMPATIBLE_IOCTL(FIFREEZE)
+COMPATIBLE_IOCTL(FITHAW)
/* RAID */
COMPATIBLE_IOCTL(RAID_VERSION)
COMPATIBLE_IOCTL(GET_ARRAY_INFO)
iput(inode);
return res;
}
-EXPORT_SYMBOL_GPL(d_obtain_alias);
+EXPORT_SYMBOL(d_obtain_alias);
/**
* d_splice_alias - splice a disconnected dentry into the tree if one exists
*/
int ext4_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext4_has_free_blocks(EXT4_SB(sb), 1) || (*retries)++ > 3)
+ if (!ext4_has_free_blocks(EXT4_SB(sb), 1) ||
+ (*retries)++ > 3 ||
+ !EXT4_SB(sb)->s_journal)
return 0;
jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
if (sbi->s_log_groups_per_flex) {
ret2 = find_group_flex(sb, dir, &group);
+ if (ret2 == -1) {
+ ret2 = find_group_other(sb, dir, &group);
+ if (ret2 == 0 && printk_ratelimit())
+ printk(KERN_NOTICE "ext4: find_group_flex "
+ "failed, fallback succeeded dir %lu\n",
+ dir->i_ino);
+ }
goto got_group;
}
goto out;
}
+ /* We cannot recurse into the filesystem as the transaction is already
+ * started */
+ flags |= AOP_FLAG_NOFS;
+
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page) {
ext4_journal_stop(handle);
*pagep = page;
ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
- ext4_get_block);
+ ext4_get_block);
if (!ret && ext4_should_journal_data(inode)) {
ret = walk_page_buffers(handle, page_buffers(page),
ext4_journal_stop(handle);
- if (mpd.retval == -ENOSPC) {
+ if ((mpd.retval == -ENOSPC) && sbi->s_journal) {
/* commit the transaction which would
* free blocks released in the transaction
* and try again
ret = PTR_ERR(handle);
goto out;
}
+ /* We cannot recurse into the filesystem as the transaction is already
+ * started */
+ flags |= AOP_FLAG_NOFS;
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page) {
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
- ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
error = ext4_commit_super(sb, EXT4_SB(sb)->s_es, 1);
if (error)
goto out;
spin_unlock(&c->erase_completion_lock);
- /* This thread is purely an optimisation. But if it runs when
- other things could be running, it actually makes things a
- lot worse. Use yield() and put it at the back of the runqueue
- every time. Especially during boot, pulling an inode in
- with read_inode() is much preferable to having the GC thread
- get there first. */
- yield();
+ /* Problem - immediately after bootup, the GCD spends a lot
+ * of time in places like jffs2_kill_fragtree(); so much so
+ * that userspace processes (like gdm and X) are starved
+ * despite plenty of cond_resched()s and renicing. Yield()
+ * doesn't help, either (presumably because userspace and GCD
+ * are generally competing for a higher latency resource -
+ * disk).
+ * This forces the GCD to slow the hell down. Pulling an
+ * inode in with read_inode() is much preferable to having
+ * the GC thread get there first. */
+ schedule_timeout_interruptible(msecs_to_jiffies(50));
/* Put_super will send a SIGKILL and then wait on the sem.
*/
struct jffs2_tmp_dnode_info *tn)
{
uint32_t fn_end = tn->fn->ofs + tn->fn->size;
- struct jffs2_tmp_dnode_info *this;
+ struct jffs2_tmp_dnode_info *this, *ptn;
dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw));
if (this) {
/* If the node is coincident with another at a lower address,
back up until the other node is found. It may be relevant */
- while (this->overlapped)
- this = tn_prev(this);
-
- /* First node should never be marked overlapped */
- BUG_ON(!this);
+ while (this->overlapped) {
+ ptn = tn_prev(this);
+ if (!ptn) {
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ this->overlapped = 0;
+ break;
+ }
+ this = ptn;
+ }
dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole");
}
}
if (!this->overlapped)
break;
- this = tn_prev(this);
+
+ ptn = tn_prev(this);
+ if (!ptn) {
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ this->overlapped = 0;
+ break;
+ }
+ this = ptn;
}
}
eat_last(&rii->tn_root, &last->rb);
ver_insert(&ver_root, last);
- if (unlikely(last->overlapped))
- continue;
+ if (unlikely(last->overlapped)) {
+ if (pen)
+ continue;
+ /*
+ * We killed a node which set the overlapped
+ * flags during the scan. Fix it up.
+ */
+ last->overlapped = 0;
+ }
/* Now we have a bunch of nodes in reverse version
order, in the tree at ver_root. Most of the time,
return ret;
}
+static int ocfs2_replace_extent_rec(struct inode *inode,
+ handle_t *handle,
+ struct ocfs2_path *path,
+ struct ocfs2_extent_list *el,
+ int split_index,
+ struct ocfs2_extent_rec *split_rec)
+{
+ int ret;
+
+ ret = ocfs2_path_bh_journal_access(handle, inode, path,
+ path_num_items(path) - 1);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ el->l_recs[split_index] = *split_rec;
+
+ ocfs2_journal_dirty(handle, path_leaf_bh(path));
+out:
+ return ret;
+}
+
/*
* Mark part or all of the extent record at split_index in the leaf
* pointed to by path as written. This removes the unwritten
if (ctxt.c_contig_type == CONTIG_NONE) {
if (ctxt.c_split_covers_rec)
- el->l_recs[split_index] = *split_rec;
+ ret = ocfs2_replace_extent_rec(inode, handle,
+ path, el,
+ split_index, split_rec);
else
ret = ocfs2_split_and_insert(inode, handle, path, et,
&last_eb_bh, split_index,
if (!mle) {
if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN &&
res->owner != assert->node_idx) {
- mlog(ML_ERROR, "assert_master from "
- "%u, but current owner is "
- "%u! (%.*s)\n",
- assert->node_idx, res->owner,
- namelen, name);
- goto kill;
+ mlog(ML_ERROR, "DIE! Mastery assert from %u, "
+ "but current owner is %u! (%.*s)\n",
+ assert->node_idx, res->owner, namelen,
+ name);
+ __dlm_print_one_lock_resource(res);
+ BUG();
}
} else if (mle->type != DLM_MLE_MIGRATION) {
if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) {
spin_lock(&res->spinlock);
/* This ensures that clear refmap is sent after the set */
- __dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG |
- DLM_LOCK_RES_MIGRATING));
+ __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
spin_unlock(&res->spinlock);
/* clear our bit from the master's refmap, ignore errors */
else
BUG_ON(res->owner == dlm->node_num);
- spin_lock(&dlm->spinlock);
+ spin_lock(&dlm->ast_lock);
/* We want to be sure that we're not freeing a lock
* that still has AST's pending... */
in_use = !list_empty(&lock->ast_list);
- spin_unlock(&dlm->spinlock);
+ spin_unlock(&dlm->ast_lock);
if (in_use) {
mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock "
"while waiting for an ast!", res->lockname.len,
struct ocfs2_lock_res *lockres);
static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres,
int convert);
-#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \
- mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
- _err, _func, _lockres->l_name); \
+#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \
+ if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY) \
+ mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \
+ _err, _func, _lockres->l_name); \
+ else \
+ mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n", \
+ _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name, \
+ (unsigned int)ocfs2_get_dentry_lock_ino(_lockres)); \
} while (0)
static int ocfs2_downconvert_thread(void *arg);
static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb,
struct ocfs2_node_map osb_recovering_orphan_dirs;
unsigned int *osb_orphan_wipes;
wait_queue_head_t osb_wipe_event;
+
+ /* used to protect metaecc calculation check of xattr. */
+ spinlock_t osb_xattr_lock;
};
#define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info)
unlock_buffer(*bh);
ll_rw_block(READ, 1, bh);
wait_on_buffer(*bh);
+ if (!buffer_uptodate(*bh)) {
+ mlog_errno(-EIO);
+ brelse(*bh);
+ *bh = NULL;
+ return -EIO;
+ }
+
return 0;
}
INIT_LIST_HEAD(&osb->blocked_lock_list);
osb->blocked_lock_count = 0;
spin_lock_init(&osb->osb_lock);
+ spin_lock_init(&osb->osb_xattr_lock);
ocfs2_init_inode_steal_slot(osb);
atomic_set(&osb->alloc_stats.moves, 0);
#define OCFS2_XATTR_ROOT_SIZE (sizeof(struct ocfs2_xattr_def_value_root))
#define OCFS2_XATTR_INLINE_SIZE 80
+#define OCFS2_XATTR_HEADER_GAP 4
#define OCFS2_XATTR_FREE_IN_IBODY (OCFS2_MIN_XATTR_INLINE_SIZE \
- sizeof(struct ocfs2_xattr_header) \
- - sizeof(__u32))
+ - OCFS2_XATTR_HEADER_GAP)
#define OCFS2_XATTR_FREE_IN_BLOCK(ptr) ((ptr)->i_sb->s_blocksize \
- sizeof(struct ocfs2_xattr_block) \
- sizeof(struct ocfs2_xattr_header) \
- - sizeof(__u32))
+ - OCFS2_XATTR_HEADER_GAP)
static struct ocfs2_xattr_def_value_root def_xv = {
.xv.xr_list.l_count = cpu_to_le16(1),
bucket->bu_blocks, bucket->bu_bhs, 0,
NULL);
if (!rc) {
+ spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb,
bucket->bu_bhs,
bucket->bu_blocks,
&bucket_xh(bucket)->xh_check);
+ spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
if (rc)
mlog_errno(rc);
}
{
int i;
+ spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb,
bucket->bu_bhs, bucket->bu_blocks,
&bucket_xh(bucket)->xh_check);
+ spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock);
for (i = 0; i < bucket->bu_blocks; i++)
ocfs2_journal_dirty(handle, bucket->bu_bhs[i]);
last += 1;
}
- free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+ free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
if (free < 0)
return -EIO;
last += 1;
}
- free = min_offs - ((void *)last - xs->base) - sizeof(__u32);
+ free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP;
if (free < 0)
return 0;
if (!ret) {
/* Update inode ctime. */
- ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh,
- OCFS2_JOURNAL_ACCESS_WRITE);
+ ret = ocfs2_journal_access_di(ctxt->handle, inode,
+ xis->inode_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
if (ret) {
mlog_errno(ret);
goto out;
xh_free_start = le16_to_cpu(xh->xh_free_start);
header_size = sizeof(struct ocfs2_xattr_header) +
count * sizeof(struct ocfs2_xattr_entry);
- max_free = OCFS2_XATTR_BUCKET_SIZE -
- le16_to_cpu(xh->xh_name_value_len) - header_size;
+ max_free = OCFS2_XATTR_BUCKET_SIZE - header_size -
+ le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP;
mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size "
"of %u which exceed block size\n",
need = 0;
}
- free = xh_free_start - header_size;
+ free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP;
/*
* We need to make sure the new name/value pair
* can exist in the same block.
}
xh_free_start = le16_to_cpu(xh->xh_free_start);
- free = xh_free_start - header_size;
+ free = xh_free_start - header_size
+ - OCFS2_XATTR_HEADER_GAP;
if (xh_free_start % blocksize < need)
free -= xh_free_start % blocksize;
}
}
unlock_new_inode(inode);
- } else
+ } else {
module_put(de->owner);
+ de_put(de);
+ }
return inode;
out_ino:
else
kflags = ppage->flags;
- uflags = kpf_copy_bit(KPF_LOCKED, PG_locked, kflags) |
+ uflags = kpf_copy_bit(kflags, KPF_LOCKED, PG_locked) |
kpf_copy_bit(kflags, KPF_ERROR, PG_error) |
kpf_copy_bit(kflags, KPF_REFERENCED, PG_referenced) |
kpf_copy_bit(kflags, KPF_UPTODATE, PG_uptodate) |
return (mask && (page_private(page) & mask) == mask);
}
+/*
+ * Mapping of multi-page buffers into contiguous virtual space
+ */
+
+typedef struct a_list {
+ void *vm_addr;
+ struct a_list *next;
+} a_list_t;
+
+static a_list_t *as_free_head;
+static int as_list_len;
+static DEFINE_SPINLOCK(as_lock);
+
+/*
+ * Try to batch vunmaps because they are costly.
+ */
+STATIC void
+free_address(
+ void *addr)
+{
+ a_list_t *aentry;
+
+#ifdef CONFIG_XEN
+ /*
+ * Xen needs to be able to make sure it can get an exclusive
+ * RO mapping of pages it wants to turn into a pagetable. If
+ * a newly allocated page is also still being vmap()ed by xfs,
+ * it will cause pagetable construction to fail. This is a
+ * quick workaround to always eagerly unmap pages so that Xen
+ * is happy.
+ */
+ vunmap(addr);
+ return;
+#endif
+
+ aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
+ if (likely(aentry)) {
+ spin_lock(&as_lock);
+ aentry->next = as_free_head;
+ aentry->vm_addr = addr;
+ as_free_head = aentry;
+ as_list_len++;
+ spin_unlock(&as_lock);
+ } else {
+ vunmap(addr);
+ }
+}
+
+STATIC void
+purge_addresses(void)
+{
+ a_list_t *aentry, *old;
+
+ if (as_free_head == NULL)
+ return;
+
+ spin_lock(&as_lock);
+ aentry = as_free_head;
+ as_free_head = NULL;
+ as_list_len = 0;
+ spin_unlock(&as_lock);
+
+ while ((old = aentry) != NULL) {
+ vunmap(aentry->vm_addr);
+ aentry = aentry->next;
+ kfree(old);
+ }
+}
+
/*
* Internal xfs_buf_t object manipulation
*/
uint i;
if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
- vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
+ free_address(bp->b_addr - bp->b_offset);
for (i = 0; i < bp->b_page_count; i++) {
struct page *page = bp->b_pages[i];
bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
bp->b_flags |= XBF_MAPPED;
} else if (flags & XBF_MAPPED) {
- bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
- -1, PAGE_KERNEL);
+ if (as_list_len > 64)
+ purge_addresses();
+ bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
+ VM_MAP, PAGE_KERNEL);
if (unlikely(bp->b_addr == NULL))
return -ENOMEM;
bp->b_addr += bp->b_offset;
count++;
}
+ if (as_list_len > 0)
+ purge_addresses();
if (count)
blk_run_address_space(target->bt_mapping);
struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
size_t size);
void drm_gem_object_handle_free(struct kref *kref);
+void drm_gem_vm_open(struct vm_area_struct *vma);
+void drm_gem_vm_close(struct vm_area_struct *vma);
int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
static inline void
extern char *drm_get_dvi_i_select_name(int val);
extern char *drm_get_tv_subconnector_name(int val);
extern char *drm_get_tv_select_name(int val);
-extern void drm_fb_release(struct file *filp);
+extern void drm_fb_release(struct drm_file *file_priv);
extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
extern struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter);
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
/* Actually set the mode */
- void (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode, int x, int y,
- struct drm_framebuffer *old_fb);
+ int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb);
/* Move the crtc on the current fb to the given position *optional* */
- void (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb);
+ int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb);
};
struct drm_encoder_helper_funcs {
void (*mode_set)(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+ struct drm_crtc *(*get_crtc)(struct drm_encoder *encoder);
/* detect for DAC style encoders */
enum drm_connector_status (*detect)(struct drm_encoder *encoder,
struct drm_connector *connector);
u8 hsync_pulse_width_lo;
u8 vsync_pulse_width_lo:4;
u8 vsync_offset_lo:4;
- u8 hsync_pulse_width_hi:2;
- u8 hsync_offset_hi:2;
u8 vsync_pulse_width_hi:2;
u8 vsync_offset_hi:2;
+ u8 hsync_pulse_width_hi:2;
+ u8 hsync_offset_hi:2;
u8 width_mm_lo;
u8 height_mm_lo;
u8 height_mm_hi:4;
header-y += cgroupstats.h
header-y += cramfs_fs.h
header-y += cycx_cfm.h
+header-y += dcbnl.h
header-y += dlmconstants.h
header-y += dlm_device.h
header-y += dlm_netlink.h
};
/* This should not be used directly - use rq_for_each_segment */
+#define for_each_bio(_bio) \
+ for (; _bio; _bio = _bio->bi_next)
#define __rq_for_each_bio(_bio, rq) \
if ((rq->bio)) \
for (_bio = (rq)->bio; _bio; _bio = _bio->bi_next)
#define __deprecated __attribute__((deprecated))
#define __packed __attribute__((packed))
#define __weak __attribute__((weak))
-#define __naked __attribute__((naked))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ */
+#define __naked __attribute__((naked)) notrace
+
#define __noreturn __attribute__((noreturn))
/*
#ifndef __LINUX_DCBNL_H__
#define __LINUX_DCBNL_H__
+#include <linux/types.h>
+
#define DCB_PROTO_VERSION 1
struct dcbmsg {
- unsigned char dcb_family;
+ __u8 dcb_family;
__u8 cmd;
__u16 dcb_pad;
};
extern struct device_driver *driver_find(const char *name,
struct bus_type *bus);
extern int driver_probe_done(void);
+extern int wait_for_device_probe(void);
+
/* sysfs interface for exporting driver attributes */
*/
#define I2C_RETRIES 0x0701 /* number of times a device address should
be polled when not acknowledging */
-#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */
+#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */
/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
* are NOT supported! (due to code brokenness)
struct mutex bus_lock;
struct mutex clist_lock;
- int timeout;
+ int timeout; /* in jiffies */
int retries;
struct device dev; /* the adapter device */
#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
#define to_ide_drv(obj, cont_type) \
- container_of(obj, struct cont_type, kref)
+ container_of(obj, struct cont_type, dev)
#define ide_drv_g(disk, cont_type) \
container_of((disk)->private_data, struct cont_type, driver)
/* Move the mac addresses to the beginning of the new header. */
memmove(skb->data, skb->data + VLAN_HLEN, 2 * VLAN_ETH_ALEN);
+ skb->mac_header -= VLAN_HLEN;
/* first, the ethernet type */
veth->h_vlan_proto = htons(ETH_P_8021Q);
/* FSTS_REG */
#define DMA_FSTS_PPF ((u32)2)
#define DMA_FSTS_PFO ((u32)1)
+#define DMA_FSTS_IQE (1 << 4)
#define dma_fsts_fault_record_index(s) (((s) >> 8) & 0xff)
/* FRCD_REG, 32 bits access */
unsigned int size_order, u64 type,
int non_present_entry_flush);
-extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
+extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t);
* See Documentation/io_mapping.txt
*/
-/* this struct isn't actually defined anywhere */
-struct io_mapping;
-
#ifdef CONFIG_HAVE_ATOMIC_IOMAP
+struct io_mapping {
+ resource_size_t base;
+ unsigned long size;
+ pgprot_t prot;
+};
+
/*
* For small address space machines, mapping large objects
* into the kernel virtual space isn't practical. Where
*/
static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
{
- return (struct io_mapping *) base;
+ struct io_mapping *iomap;
+
+ if (!is_io_mapping_possible(base, size))
+ return NULL;
+
+ iomap = kmalloc(sizeof(*iomap), GFP_KERNEL);
+ if (!iomap)
+ return NULL;
+
+ iomap->base = base;
+ iomap->size = size;
+ iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL));
+ return iomap;
}
static inline void
io_mapping_free(struct io_mapping *mapping)
{
+ kfree(mapping);
}
/* Atomic map/unmap */
static inline void *
io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset)
{
- offset += (unsigned long) mapping;
- return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0,
- __pgprot(__PAGE_KERNEL_WC));
+ resource_size_t phys_addr;
+ unsigned long pfn;
+
+ BUG_ON(offset >= mapping->size);
+ phys_addr = mapping->base + offset;
+ pfn = (unsigned long) (phys_addr >> PAGE_SHIFT);
+ return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot);
}
static inline void
static inline void *
io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
{
- offset += (unsigned long) mapping;
- return ioremap_wc(offset, PAGE_SIZE);
+ resource_size_t phys_addr;
+
+ BUG_ON(offset >= mapping->size);
+ phys_addr = mapping->base + offset;
+
+ return ioremap_wc(phys_addr, PAGE_SIZE);
}
static inline void
#else
+/* this struct isn't actually defined anywhere */
+struct io_mapping;
+
/* Create the io_mapping object*/
static inline struct io_mapping *
-io_mapping_create_wc(unsigned long base, unsigned long size)
+io_mapping_create_wc(resource_size_t base, unsigned long size)
{
return (struct io_mapping *) ioremap_wc(base, size);
}
#define _XT_NFLOG_TARGET
#define XT_NFLOG_DEFAULT_GROUP 0x1
-#define XT_NFLOG_DEFAULT_THRESHOLD 1
+#define XT_NFLOG_DEFAULT_THRESHOLD 0
#define XT_NFLOG_MASK 0x0
#define PCI_DEVICE_ID_INTEL_82378 0x0484
#define PCI_DEVICE_ID_INTEL_I960 0x0960
#define PCI_DEVICE_ID_INTEL_I960RM 0x0962
+#define PCI_DEVICE_ID_INTEL_8257X_SOL 0x1062
+#define PCI_DEVICE_ID_INTEL_82573E_SOL 0x1085
+#define PCI_DEVICE_ID_INTEL_82573L_SOL 0x108F
#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130
#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132
#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
#ifdef CONFIG_PM_SLEEP
extern void device_pm_lock(void);
+extern int sysdev_resume(void);
extern void device_power_up(pm_message_t state);
extern void device_resume(pm_message_t state);
extern void device_pm_unlock(void);
+extern int sysdev_suspend(pm_message_t state);
extern int device_power_down(pm_message_t state);
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
#define rcu_enter_nohz() do { } while (0)
#define rcu_exit_nohz() do { } while (0)
+/* A context switch is a grace period for rcuclassic. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUCLASSIC_H */
void (*func)(struct rcu_head *head);
};
+/* Internal to kernel, but needed by rcupreempt.h. */
+extern int rcu_scheduler_active;
+
#if defined(CONFIG_CLASSIC_RCU)
#include <linux/rcuclassic.h>
#elif defined(CONFIG_TREE_RCU)
/* Internal to kernel */
extern void rcu_init(void);
+extern void rcu_scheduler_starting(void);
extern int rcu_needs_cpu(int cpu);
#endif /* __LINUX_RCUPDATE_H */
#define rcu_exit_nohz() do { } while (0)
#endif /* CONFIG_NO_HZ */
+/*
+ * A context switch is a grace period for rcupreempt synchronize_rcu()
+ * only during early boot, before the scheduler has been initialized.
+ * So, how the heck do we get a context switch? Well, if the caller
+ * invokes synchronize_rcu(), they are willing to accept a context
+ * switch, so we simply pretend that one happened.
+ *
+ * After boot, there might be a blocked or preempted task in an RCU
+ * read-side critical section, so we cannot then take the fastpath.
+ */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1 && !rcu_scheduler_active;
+}
+
#endif /* __LINUX_RCUPREEMPT_H */
}
#endif /* CONFIG_NO_HZ */
+/* A context switch is a grace period for rcutree. */
+static inline int rcu_blocking_is_gp(void)
+{
+ return num_online_cpus() == 1;
+}
+
#endif /* __LINUX_RCUTREE_H */
extern int sched_group_set_rt_period(struct task_group *tg,
long rt_period_us);
extern long sched_group_rt_period(struct task_group *tg);
+extern int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk);
#endif
#endif
+extern int task_can_switch_user(struct user_struct *up,
+ struct task_struct *tsk);
+
#ifdef CONFIG_TASK_XACCT
static inline void add_rchar(struct task_struct *tsk, ssize_t amt)
{
#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
#define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
+#define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
void *here);
extern void skb_under_panic(struct sk_buff *skb, int len,
void *here);
-extern void skb_truesize_bug(struct sk_buff *skb);
-
-static inline void skb_truesize_check(struct sk_buff *skb)
-{
- int len = sizeof(struct sk_buff) + skb->len;
-
- if (unlikely((int)skb->truesize < len))
- skb_truesize_bug(skb);
-}
extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
int getfrag(void *from, char *to, int offset,
void * __must_check __krealloc(const void *, size_t, gfp_t);
void * __must_check krealloc(const void *, size_t, gfp_t);
void kfree(const void *);
+void kzfree(const void *);
size_t ksize(const void *);
/*
* int getmiso(struct spi_device *);
* void spidelay(unsigned);
*
+ * setsck()'s is_on parameter is a zero/nonzero boolean.
+ *
+ * setmosi()'s is_on parameter is a zero/nonzero boolean.
+ *
+ * getmiso() is required to return 0 or 1 only. Any other value is invalid
+ * and will result in improper operation.
+ *
* A non-inlined routine would call bitbang_txrx_*() routines. The
* main loop could easily compile down to a handful of instructions,
* especially if the delay is a NOP (to run at peak speed).
struct kref kref;
struct hlist_head uidhash_table[UIDHASH_SZ];
struct user_struct *creator;
+ struct work_struct destroyer;
};
extern struct user_namespace init_user_ns;
struct nf_conn *ct = (struct nf_conn *)skb->nfct;
int ret = NF_ACCEPT;
- if (ct) {
+ if (ct && ct != &nf_conntrack_untracked) {
if (!nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct))
ret = __nf_conntrack_confirm(skb);
nf_ct_deliver_cached_events(ct);
static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb)
{
- skb_truesize_check(skb);
sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
sk->sk_wmem_queued -= skb->truesize;
sk_mem_uncharge(sk, skb->truesize);
ssleep(root_delay);
}
- /* wait for the known devices to complete their probing */
- while (driver_probe_done() != 0)
- msleep(100);
- async_synchronize_full();
+ /*
+ * wait for the known devices to complete their probing
+ *
+ * Note: this is a potential source of long boot delays.
+ * For example, it is not atypical to wait 5 seconds here
+ * for the touchpad of a laptop to initialize.
+ */
+ wait_for_device_probe();
md_run_setup();
while (driver_probe_done() != 0 ||
(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
msleep(100);
+ async_synchronize_full();
}
is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
*/
printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
- while (driver_probe_done() < 0)
- msleep(100);
+
+ wait_for_device_probe();
+
fd = sys_open("/dev/md0", 0, 0);
if (fd >= 0) {
sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
extern void tc_init(void);
#endif
-enum system_states system_state;
+enum system_states system_state __read_mostly;
EXPORT_SYMBOL(system_state);
/*
* at least once to get things moving:
*/
init_idle_bootup_task(current);
+ rcu_scheduler_starting();
preempt_enable_no_resched();
schedule();
preempt_disable();
error = device_power_down(PMSG_FREEZE);
if (error)
goto Enable_irqs;
+
+ /* Suspend system devices */
+ error = sysdev_suspend(PMSG_FREEZE);
+ if (error)
+ goto Power_up_devices;
} else
#endif
{
#ifdef CONFIG_KEXEC_JUMP
if (kexec_image->preserve_context) {
+ sysdev_resume();
+ Power_up_devices:
device_power_up(PMSG_RESTORE);
Enable_irqs:
local_irq_enable();
}
set_console(orig_fgconsole);
release_console_sem();
+
+ if (vt_waitactive(orig_fgconsole)) {
+ pr_debug("Resume: Can't switch VCs.");
+ return;
+ }
+
kmsg_redirect = orig_kmsg;
}
#endif
"aborting hibernation\n");
goto Enable_irqs;
}
+ sysdev_suspend(PMSG_FREEZE);
+ if (error) {
+ printk(KERN_ERR "PM: Some devices failed to power down, "
+ "aborting hibernation\n");
+ goto Power_up_devices;
+ }
if (hibernation_test(TEST_CORE))
goto Power_up;
if (!in_suspend)
platform_leave(platform_mode);
Power_up:
+ sysdev_resume();
/* NOTE: device_power_up() is just a resume() for devices
* that suspended with irqs off ... no overall powerup.
*/
+ Power_up_devices:
device_power_up(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
Enable_irqs:
"aborting resume\n");
goto Enable_irqs;
}
+ sysdev_suspend(PMSG_QUIESCE);
/* We'll ignore saved state, but this gets preempt count (etc) right */
save_processor_state();
error = restore_highmem();
swsusp_free();
restore_processor_state();
touch_softlockup_watchdog();
+ sysdev_resume();
device_power_up(PMSG_RECOVER);
Enable_irqs:
local_irq_enable();
local_irq_disable();
error = device_power_down(PMSG_HIBERNATE);
if (!error) {
+ sysdev_suspend(PMSG_HIBERNATE);
hibernation_ops->enter();
/* We should never get here */
while (1);
int error;
unsigned int flags;
+ /*
+ * If the user said "noresume".. bail out early.
+ */
+ if (noresume)
+ return 0;
+
/*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
mutex_unlock(&pm_mutex);
return -ENOENT;
}
+ /*
+ * Some device discovery might still be in progress; we need
+ * to wait for this to finish.
+ */
+ wait_for_device_probe();
swsusp_resume_device = name_to_dev_t(resume_file);
pr_debug("PM: Resume from partition %s\n", resume_file);
} else {
goto Done;
}
- if (!suspend_test(TEST_CORE))
- error = suspend_ops->enter(state);
+ error = sysdev_suspend(PMSG_SUSPEND);
+ if (!error) {
+ if (!suspend_test(TEST_CORE))
+ error = suspend_ops->enter(state);
+ sysdev_resume();
+ }
device_power_up(PMSG_RESUME);
Done:
data->swap = swsusp_resume_device ?
swap_type_of(swsusp_resume_device, 0, NULL) : -1;
data->mode = O_RDONLY;
- error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
+ error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
if (error)
- pm_notifier_call_chain(PM_POST_RESTORE);
+ pm_notifier_call_chain(PM_POST_HIBERNATION);
} else {
data->swap = -1;
data->mode = O_WRONLY;
- error = pm_notifier_call_chain(PM_HIBERNATION_PREPARE);
+ error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
if (error)
- pm_notifier_call_chain(PM_POST_HIBERNATION);
+ pm_notifier_call_chain(PM_POST_RESTORE);
}
if (error)
atomic_inc(&snapshot_device_available);
* driver system.
*/
static DECLARE_MUTEX(console_sem);
-static DECLARE_MUTEX(secondary_console_sem);
struct console *console_drivers;
EXPORT_SYMBOL_GPL(console_drivers);
printk("Suspending console(s) (use no_console_suspend to debug)\n");
acquire_console_sem();
console_suspended = 1;
+ up(&console_sem);
}
void resume_console(void)
{
if (!console_suspend_enabled)
return;
+ down(&console_sem);
console_suspended = 0;
release_console_sem();
}
void acquire_console_sem(void)
{
BUG_ON(in_interrupt());
- if (console_suspended) {
- down(&secondary_console_sem);
- return;
- }
down(&console_sem);
+ if (console_suspended)
+ return;
console_locked = 1;
console_may_schedule = 1;
}
{
if (down_trylock(&console_sem))
return -1;
+ if (console_suspended) {
+ up(&console_sem);
+ return -1;
+ }
console_locked = 1;
console_may_schedule = 0;
return 0;
unsigned wake_klogd = 0;
if (console_suspended) {
- up(&secondary_console_sem);
+ up(&console_sem);
return;
}
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/module.h>
+#include <linux/kernel_stat.h>
enum rcu_barrier {
RCU_BARRIER_STD,
static atomic_t rcu_barrier_cpu_count;
static DEFINE_MUTEX(rcu_barrier_mutex);
static struct completion rcu_barrier_completion;
+int rcu_scheduler_active __read_mostly;
/*
* Awaken the corresponding synchronize_rcu() instance now that a
void synchronize_rcu(void)
{
struct rcu_synchronize rcu;
+
+ if (rcu_blocking_is_gp())
+ return;
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu(&rcu.head, wakeme_after_rcu);
__rcu_init();
}
+void rcu_scheduler_starting(void)
+{
+ WARN_ON(num_online_cpus() != 1);
+ WARN_ON(nr_context_switches() > 0);
+ rcu_scheduler_active = 1;
+}
{
struct rcu_synchronize rcu;
+ if (num_online_cpus() == 1)
+ return; /* blocking is gp if only one CPU! */
+
init_completion(&rcu.completion);
/* Will wake me after RCU finished. */
call_rcu_sched(&rcu.head, wakeme_after_rcu);
void rcu_check_callbacks(int cpu, int user)
{
if (user ||
- (idle_cpu(cpu) && !in_softirq() &&
- hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
+ (idle_cpu(cpu) && rcu_scheduler_active &&
+ !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) {
/*
* Get here if this CPU took its interrupt from user
{
ktime_t now;
- if (rt_bandwidth_enabled() && rt_b->rt_runtime == RUNTIME_INF)
+ if (!rt_bandwidth_enabled() || rt_b->rt_runtime == RUNTIME_INF)
return;
if (hrtimer_active(&rt_b->rt_period_timer))
return ret;
}
+
+int sched_rt_can_attach(struct task_group *tg, struct task_struct *tsk)
+{
+ /* Don't accept realtime tasks when there is no way for them to run */
+ if (rt_task(tsk) && tg->rt_bandwidth.rt_runtime == 0)
+ return 0;
+
+ return 1;
+}
+
#else /* !CONFIG_RT_GROUP_SCHED */
static int sched_rt_global_constraints(void)
{
struct task_struct *tsk)
{
#ifdef CONFIG_RT_GROUP_SCHED
- /* Don't accept realtime tasks when there is no way for them to run */
- if (rt_task(tsk) && cgroup_tg(cgrp)->rt_bandwidth.rt_runtime == 0)
+ if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
return -EINVAL;
#else
/* We don't support RT-tasks being in separate groups */
#include <linux/seccomp.h>
#include <linux/sched.h>
+#include <linux/compat.h>
/* #define SECCOMP_DEBUG 1 */
#define NR_SECCOMP_MODES 1
0, /* null terminated */
};
-#ifdef TIF_32BIT
+#ifdef CONFIG_COMPAT
static int mode1_syscalls_32[] = {
__NR_seccomp_read_32, __NR_seccomp_write_32, __NR_seccomp_exit_32, __NR_seccomp_sigreturn_32,
0, /* null terminated */
switch (mode) {
case 1:
syscall = mode1_syscalls;
-#ifdef TIF_32BIT
- if (test_thread_flag(TIF_32BIT))
+#ifdef CONFIG_COMPAT
+ if (is_compat_task())
syscall = mode1_syscalls_32;
#endif
do {
abort_creds(new);
return retval;
}
-
+
/*
* change the user struct in a credentials set to match the new UID
*/
if (!new_user)
return -EAGAIN;
+ if (!task_can_switch_user(new_user, current)) {
+ free_uid(new_user);
+ return -EINVAL;
+ }
+
if (atomic_read(&new_user->processes) >=
current->signal->rlim[RLIMIT_NPROC].rlim_cur &&
new_user != INIT_USER) {
goto error;
}
- retval = -EAGAIN;
- if (new->uid != old->uid && set_user(new) < 0)
- goto error;
-
+ if (new->uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
if (ruid != (uid_t) -1 ||
(euid != (uid_t) -1 && euid != old->uid))
new->suid = new->euid;
retval = -EPERM;
if (capable(CAP_SETUID)) {
new->suid = new->uid = uid;
- if (uid != old->uid && set_user(new) < 0) {
- retval = -EAGAIN;
- goto error;
+ if (uid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
}
} else if (uid != old->uid && uid != new->suid) {
goto error;
goto error;
}
- retval = -EAGAIN;
if (ruid != (uid_t) -1) {
new->uid = ruid;
- if (ruid != old->uid && set_user(new) < 0)
- goto error;
+ if (ruid != old->uid) {
+ retval = set_user(new);
+ if (retval < 0)
+ goto error;
+ }
}
if (euid != (uid_t) -1)
new->euid = euid;
#endif
+#if defined(CONFIG_RT_GROUP_SCHED) && defined(CONFIG_USER_SCHED)
+/*
+ * We need to check if a setuid can take place. This function should be called
+ * before successfully completing the setuid.
+ */
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+
+ return sched_rt_can_attach(up->tg, tsk);
+
+}
+#else
+int task_can_switch_user(struct user_struct *up, struct task_struct *tsk)
+{
+ return 1;
+}
+#endif
+
/*
* Locate the user_struct for the passed UID. If found, take a ref on it. The
* caller must undo that ref with free_uid().
return 0;
}
-void free_user_ns(struct kref *kref)
+/*
+ * Deferred destructor for a user namespace. This is required because
+ * free_user_ns() may be called with uidhash_lock held, but we need to call
+ * back to free_uid() which will want to take the lock again.
+ */
+static void free_user_ns_work(struct work_struct *work)
{
- struct user_namespace *ns;
-
- ns = container_of(kref, struct user_namespace, kref);
+ struct user_namespace *ns =
+ container_of(work, struct user_namespace, destroyer);
free_uid(ns->creator);
kfree(ns);
}
+
+void free_user_ns(struct kref *kref)
+{
+ struct user_namespace *ns =
+ container_of(kref, struct user_namespace, kref);
+
+ INIT_WORK(&ns->destroyer, free_user_ns_work);
+ schedule_work(&ns->destroyer);
+}
EXPORT_SYMBOL(free_user_ns);
If unsure, say N.
-menuconfig BUILD_DOCSRC
+config BUILD_DOCSRC
bool "Build targets in Documentation/ tree"
depends on HEADERS_CHECK
help
*/
static inline int shmem_acct_size(unsigned long flags, loff_t size)
{
- return (flags & VM_ACCOUNT) ?
- security_vm_enough_memory_kern(VM_ACCT(size)) : 0;
+ return (flags & VM_NORESERVE) ?
+ 0 : security_vm_enough_memory_kern(VM_ACCT(size));
}
static inline void shmem_unacct_size(unsigned long flags, loff_t size)
{
- if (flags & VM_ACCOUNT)
+ if (!(flags & VM_NORESERVE))
vm_unacct_memory(VM_ACCT(size));
}
*/
static inline int shmem_acct_block(unsigned long flags)
{
- return (flags & VM_ACCOUNT) ?
- 0 : security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE));
+ return (flags & VM_NORESERVE) ?
+ security_vm_enough_memory_kern(VM_ACCT(PAGE_CACHE_SIZE)) : 0;
}
static inline void shmem_unacct_blocks(unsigned long flags, long pages)
{
- if (!(flags & VM_ACCOUNT))
+ if (flags & VM_NORESERVE)
vm_unacct_memory(pages * VM_ACCT(PAGE_CACHE_SIZE));
}
return 0;
}
-static struct inode *
-shmem_get_inode(struct super_block *sb, int mode, dev_t dev)
+static struct inode *shmem_get_inode(struct super_block *sb, int mode,
+ dev_t dev, unsigned long flags)
{
struct inode *inode;
struct shmem_inode_info *info;
info = SHMEM_I(inode);
memset(info, 0, (char *)inode - (char *)info);
spin_lock_init(&info->lock);
+ info->flags = flags & VM_NORESERVE;
INIT_LIST_HEAD(&info->swaplist);
switch (mode & S_IFMT) {
static int
shmem_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev)
{
- struct inode *inode = shmem_get_inode(dir->i_sb, mode, dev);
+ struct inode *inode;
int error = -ENOSPC;
+ inode = shmem_get_inode(dir->i_sb, mode, dev, VM_NORESERVE);
if (inode) {
error = security_inode_init_security(inode, dir, NULL, NULL,
NULL);
if (len > PAGE_CACHE_SIZE)
return -ENAMETOOLONG;
- inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0);
+ inode = shmem_get_inode(dir->i_sb, S_IFLNK|S_IRWXUGO, 0, VM_NORESERVE);
if (!inode)
return -ENOSPC;
sb->s_flags |= MS_POSIXACL;
#endif
- inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0);
+ inode = shmem_get_inode(sb, S_IFDIR | sbinfo->mode, 0, VM_NORESERVE);
if (!inode)
goto failed;
inode->i_uid = sbinfo->uid;
return 0;
}
-#define shmem_file_operations ramfs_file_operations
-#define shmem_vm_ops generic_file_vm_ops
-#define shmem_get_inode ramfs_get_inode
-#define shmem_acct_size(a, b) 0
-#define shmem_unacct_size(a, b) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define shmem_vm_ops generic_file_vm_ops
+#define shmem_file_operations ramfs_file_operations
+#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
+#define shmem_acct_size(flags, size) 0
+#define shmem_unacct_size(flags, size) do {} while (0)
+#define SHMEM_MAX_BYTES LLONG_MAX
#endif /* CONFIG_SHMEM */
* shmem_file_setup - get an unlinked file living in tmpfs
* @name: name for dentry (to be seen in /proc/<pid>/maps
* @size: size to be set for the file
- * @flags: vm_flags
+ * @flags: VM_NORESERVE suppresses pre-accounting of the entire object size
*/
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags)
{
goto put_dentry;
error = -ENOSPC;
- inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0);
+ inode = shmem_get_inode(root->d_sb, S_IFREG | S_IRWXUGO, 0, flags);
if (!inode)
goto close_file;
-#ifdef CONFIG_SHMEM
- SHMEM_I(inode)->flags = (flags & VM_NORESERVE) ? 0 : VM_ACCOUNT;
-#endif
d_instantiate(dentry, inode);
inode->i_size = size;
inode->i_nlink = 0; /* It is unlinked */
if (!bdev) {
if (bdev_p)
- *bdev_p = sis->bdev;
+ *bdev_p = bdget(sis->bdev->bd_dev);
spin_unlock(&swap_lock);
return i;
struct swap_extent, list);
if (se->start_block == offset) {
if (bdev_p)
- *bdev_p = sis->bdev;
+ *bdev_p = bdget(sis->bdev->bd_dev);
spin_unlock(&swap_lock);
bdput(bdev);
}
EXPORT_SYMBOL(krealloc);
+/**
+ * kzfree - like kfree but zero memory
+ * @p: object to free memory of
+ *
+ * The memory of the object @p points to is zeroed before freed.
+ * If @p is %NULL, kzfree() does nothing.
+ */
+void kzfree(const void *p)
+{
+ size_t ks;
+ void *mem = (void *)p;
+
+ if (unlikely(ZERO_OR_NULL_PTR(mem)))
+ return;
+ ks = ksize(mem);
+ memset(mem, 0, ks);
+ kfree(mem);
+}
+EXPORT_SYMBOL(kzfree);
+
/*
* strndup_user - duplicate an existing string from user space
* @s: The string to duplicate
unsigned long addr;
int purged = 0;
+ BUG_ON(!size);
BUG_ON(size & ~PAGE_MASK);
va = kmalloc_node(sizeof(struct vmap_area),
addr = ALIGN(vstart, align);
spin_lock(&vmap_area_lock);
+ if (addr + size - 1 < addr)
+ goto overflow;
+
/* XXX: could have a last_hole cache */
n = vmap_area_root.rb_node;
if (n) {
while (addr + size > first->va_start && addr + size <= vend) {
addr = ALIGN(first->va_end + PAGE_SIZE, align);
+ if (addr + size - 1 < addr)
+ goto overflow;
n = rb_next(&first->rb_node);
if (n)
}
found:
if (addr + size > vend) {
+overflow:
spin_unlock(&vmap_area_lock);
if (!purged) {
purge_vmap_area_lazy();
static DEFINE_SPINLOCK(purge_lock);
LIST_HEAD(valist);
struct vmap_area *va;
+ struct vmap_area *n_va;
int nr = 0;
/*
if (nr) {
spin_lock(&vmap_area_lock);
- list_for_each_entry(va, &valist, purge_list)
+ list_for_each_entry_safe(va, n_va, &valist, purge_list)
__free_vmap_area(va);
spin_unlock(&vmap_area_lock);
}
void unmap_kernel_range(unsigned long addr, unsigned long size)
{
unsigned long end = addr + size;
+
+ flush_cache_vunmap(addr, end);
vunmap_page_range(addr, end);
flush_tlb_kernel_range(addr, end);
}
int pass, struct scan_control *sc)
{
struct zone *zone;
- unsigned long nr_to_scan, ret = 0;
- enum lru_list l;
+ unsigned long ret = 0;
for_each_zone(zone) {
+ enum lru_list l;
if (!populated_zone(zone))
continue;
-
if (zone_is_all_unreclaimable(zone) && prio != DEF_PRIORITY)
continue;
for_each_evictable_lru(l) {
+ enum zone_stat_item ls = NR_LRU_BASE + l;
+ unsigned long lru_pages = zone_page_state(zone, ls);
+
/* For pass = 0, we don't shrink the active list */
- if (pass == 0 &&
- (l == LRU_ACTIVE || l == LRU_ACTIVE_FILE))
+ if (pass == 0 && (l == LRU_ACTIVE_ANON ||
+ l == LRU_ACTIVE_FILE))
continue;
- zone->lru[l].nr_scan +=
- (zone_page_state(zone, NR_LRU_BASE + l)
- >> prio) + 1;
+ zone->lru[l].nr_scan += (lru_pages >> prio) + 1;
if (zone->lru[l].nr_scan >= nr_pages || pass > 3) {
+ unsigned long nr_to_scan;
+
zone->lru[l].nr_scan = 0;
- nr_to_scan = min(nr_pages,
- zone_page_state(zone,
- NR_LRU_BASE + l));
+ nr_to_scan = min(nr_pages, lru_pages);
ret += shrink_list(l, nr_to_scan, zone,
sc, prio);
if (ret >= nr_pages)
}
}
}
-
return ret;
}
.may_swap = 0,
.swap_cluster_max = nr_pages,
.may_writepage = 1,
- .swappiness = vm_swappiness,
.isolate_pages = isolate_pages_global,
};
int prio;
/* Force reclaiming mapped pages in the passes #3 and #4 */
- if (pass > 2) {
+ if (pass > 2)
sc.may_swap = 1;
- sc.swappiness = 100;
- }
for (prio = DEF_PRIORITY; prio >= 0; prio--) {
unsigned long nr_to_scan = nr_pages - ret;
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
+#include <linux/netpoll.h>
#include "vlan.h"
/* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */
int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
u16 vlan_tci, int polling)
{
+ if (netpoll_rx(skb))
+ return NET_RX_DROP;
+
if (skb_bond_should_drop(skb))
goto drop;
{
int err = NET_RX_SUCCESS;
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (vlan_gro_common(napi, grp, vlan_tci, skb)) {
int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
{
+ if (netpoll_receive_skb(skb))
+ return NET_RX_DROP;
+
switch (__napi_gro_receive(napi, skb)) {
case -1:
return netif_receive_skb(skb);
if (!skb)
goto out;
+ if (netpoll_receive_skb(skb))
+ goto out;
+
err = NET_RX_SUCCESS;
switch (__napi_gro_receive(napi, skb)) {
{
/* Must be called with net_mutex held */
struct pernet_operations *ops;
- int error;
- struct net_generic *ng;
+ int error = 0;
atomic_set(&net->count, 1);
+
#ifdef NETNS_REFCNT_DEBUG
atomic_set(&net->use_count, 0);
#endif
- error = -ENOMEM;
- ng = kzalloc(sizeof(struct net_generic) +
- INITIAL_NET_GEN_PTRS * sizeof(void *), GFP_KERNEL);
- if (ng == NULL)
- goto out;
-
- ng->len = INITIAL_NET_GEN_PTRS;
- rcu_assign_pointer(net->gen, ng);
-
- error = 0;
list_for_each_entry(ops, &pernet_list, list) {
if (ops->init) {
error = ops->init(net);
}
rcu_barrier();
- kfree(ng);
goto out;
}
+static struct net_generic *net_alloc_generic(void)
+{
+ struct net_generic *ng;
+ size_t generic_size = sizeof(struct net_generic) +
+ INITIAL_NET_GEN_PTRS * sizeof(void *);
+
+ ng = kzalloc(generic_size, GFP_KERNEL);
+ if (ng)
+ ng->len = INITIAL_NET_GEN_PTRS;
+
+ return ng;
+}
+
#ifdef CONFIG_NET_NS
static struct kmem_cache *net_cachep;
static struct workqueue_struct *netns_wq;
static struct net *net_alloc(void)
{
- return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
+ struct net *net = NULL;
+ struct net_generic *ng;
+
+ ng = net_alloc_generic();
+ if (!ng)
+ goto out;
+
+ net = kmem_cache_zalloc(net_cachep, GFP_KERNEL);
+ if (!net)
+ goto out_free;
+
+ rcu_assign_pointer(net->gen, ng);
+out:
+ return net;
+
+out_free:
+ kfree(ng);
+ goto out;
}
static void net_free(struct net *net)
{
- if (!net)
- return;
-
#ifdef NETNS_REFCNT_DEBUG
if (unlikely(atomic_read(&net->use_count) != 0)) {
printk(KERN_EMERG "network namespace not free! Usage: %d\n",
err = -ENOMEM;
new_net = net_alloc();
if (!new_net)
- goto out;
+ goto out_err;
mutex_lock(&net_mutex);
err = setup_net(new_net);
- if (err)
- goto out_unlock;
-
- rtnl_lock();
- list_add_tail(&new_net->list, &net_namespace_list);
- rtnl_unlock();
-
-
-out_unlock:
+ if (!err) {
+ rtnl_lock();
+ list_add_tail(&new_net->list, &net_namespace_list);
+ rtnl_unlock();
+ }
mutex_unlock(&net_mutex);
+
+ if (err)
+ goto out_free;
out:
put_net(old_net);
- if (err) {
- net_free(new_net);
- new_net = ERR_PTR(err);
- }
return new_net;
+
+out_free:
+ net_free(new_net);
+out_err:
+ new_net = ERR_PTR(err);
+ goto out;
}
static void cleanup_net(struct work_struct *work)
static int __init net_ns_init(void)
{
+ struct net_generic *ng;
int err;
printk(KERN_INFO "net_namespace: %zd bytes\n", sizeof(struct net));
panic("Could not create netns workq");
#endif
+ ng = net_alloc_generic();
+ if (!ng)
+ panic("Could not allocate generic netns");
+
+ rcu_assign_pointer(init_net.gen, ng);
+
mutex_lock(&net_mutex);
err = setup_net(&init_net);
BUG();
}
-void skb_truesize_bug(struct sk_buff *skb)
-{
- WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) "
- "len=%u, sizeof(sk_buff)=%Zd\n",
- skb->truesize, skb->len, sizeof(struct sk_buff));
-}
-EXPORT_SYMBOL(skb_truesize_bug);
-
/* Allocate a new skbuff. We do this ourselves so we can fill in a few
* 'private' fields and also do memory statistics to find all the
* [BEEP] leaks.
if (len < 0)
return -EINVAL;
- v.val = 0;
+ memset(&v, 0, sizeof(v));
switch(optname) {
case SO_DEBUG:
{
struct sock *sk = skb->sk;
- skb_truesize_check(skb);
atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
sk_mem_uncharge(skb->sk, skb->truesize);
}
*
* This is an implementation of the CIPSO 2.2 protocol as specified in
* draft-ietf-cipso-ipsecurity-01.txt with additional tag types as found in
- * FIPS-188, copies of both documents can be found in the Documentation
- * directory. While CIPSO never became a full IETF RFC standard many vendors
+ * FIPS-188. While CIPSO never became a full IETF RFC standard many vendors
* have chosen to adopt the protocol and over the years it has become a
* de-facto standard for labeled networking.
*
+ * The CIPSO draft specification can be found in the kernel's Documentation
+ * directory as well as the following URL:
+ * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
+ * The FIPS-188 specification can be found at the following URL:
+ * http://www.itl.nist.gov/fipspubs/fip188.htm
+ *
* Author: Paul Moore <paul.moore@hp.com>
*
*/
static int tcp_shifted_skb(struct sock *sk, struct sk_buff *skb,
struct tcp_sacktag_state *state,
- unsigned int pcount, int shifted, int mss)
+ unsigned int pcount, int shifted, int mss,
+ int dup_sack)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *prev = tcp_write_queue_prev(sk, skb);
}
/* We discard results */
- tcp_sacktag_one(skb, sk, state, 0, pcount);
+ tcp_sacktag_one(skb, sk, state, dup_sack, pcount);
/* Difference in this won't matter, both ACKed by the same cumul. ACK */
TCP_SKB_CB(prev)->sacked |= (TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS);
if (!skb_shift(prev, skb, len))
goto fallback;
- if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss))
+ if (!tcp_shifted_skb(sk, skb, state, pcount, len, mss, dup_sack))
goto out;
/* Hole filled allows collapsing with the next as well, this is very
len = skb->len;
if (skb_shift(prev, skb, len)) {
pcount += tcp_skb_pcount(skb);
- tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss);
+ tcp_shifted_skb(sk, skb, state, tcp_skb_pcount(skb), len, mss, 0);
}
out:
last_lost = tp->snd_una;
}
- /* First pass: retransmit lost packets. */
tcp_for_write_queue_from(skb, sk) {
__u8 sacked = TCP_SKB_CB(skb)->sacked;
/* Tom Kelly's Scalable TCP
*
- * See htt://www-lce.eng.cam.ac.uk/~ctk21/scalable/
+ * See http://www.deneholme.net/tom/scalable/
*
* John Heffner <jheffner@sc.edu>
*/
if (twp != NULL) {
*twp = tw;
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
} else if (tw != NULL) {
/* Silly. Should hash-dance instead... */
inet_twsk_deschedule(tw, death_row);
- NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITRECYCLED);
+ NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
inet_twsk_put(tw);
}
if (net->ct.sysctl_checksum && hooknum == NF_INET_PRE_ROUTING &&
nf_ip6_checksum(skb, hooknum, dataoff, IPPROTO_ICMPV6)) {
- nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
- "nf_ct_icmpv6: ICMPv6 checksum failed\n");
+ if (LOG_INVALID(net, IPPROTO_ICMPV6))
+ nf_log_packet(PF_INET6, 0, skb, NULL, NULL, NULL,
+ "nf_ct_icmpv6: ICMPv6 checksum failed ");
return -NF_ACCEPT;
}
#endif
#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
-#define NFULNL_TIMEOUT_DEFAULT HZ /* every second */
+#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
#define NFULNL_COPY_RANGE_MAX 0xFFFF /* max packet size is limited by 16-bit struct nfattr nfa_len field */
qthreshold = inst->qthreshold;
/* per-rule qthreshold overrides per-instance */
- if (qthreshold > li->u.ulog.qthreshold)
- qthreshold = li->u.ulog.qthreshold;
+ if (li->u.ulog.qthreshold)
+ if (qthreshold > li->u.ulog.qthreshold)
+ qthreshold = li->u.ulog.qthreshold;
+
switch (inst->copy_mode) {
case NFULNL_COPY_META:
.release = seq_release_net,
};
-static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+/*
+ * Traverse state for ip{,6}_{tables,matches} for helping crossing
+ * the multi-AF mutexes.
+ */
+struct nf_mttg_trav {
+ struct list_head *head, *curr;
+ uint8_t class, nfproto;
+};
+
+enum {
+ MTTG_TRAV_INIT,
+ MTTG_TRAV_NFP_UNSPEC,
+ MTTG_TRAV_NFP_SPEC,
+ MTTG_TRAV_DONE,
+};
+
+static void *xt_mttg_seq_next(struct seq_file *seq, void *v, loff_t *ppos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ static const uint8_t next_class[] = {
+ [MTTG_TRAV_NFP_UNSPEC] = MTTG_TRAV_NFP_SPEC,
+ [MTTG_TRAV_NFP_SPEC] = MTTG_TRAV_DONE,
+ };
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_INIT:
+ trav->class = MTTG_TRAV_NFP_UNSPEC;
+ mutex_lock(&xt[NFPROTO_UNSPEC].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[NFPROTO_UNSPEC].target : &xt[NFPROTO_UNSPEC].match;
+ break;
+ case MTTG_TRAV_NFP_UNSPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ mutex_lock(&xt[trav->nfproto].mutex);
+ trav->head = trav->curr = is_target ?
+ &xt[trav->nfproto].target : &xt[trav->nfproto].match;
+ trav->class = next_class[trav->class];
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ trav->curr = trav->curr->next;
+ if (trav->curr != trav->head)
+ break;
+ /* fallthru, _stop will unlock */
+ default:
+ return NULL;
+ }
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].match, *pos);
+ if (ppos != NULL)
+ ++*ppos;
+ return trav;
}
-static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_mttg_seq_start(struct seq_file *seq, loff_t *pos,
+ bool is_target)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+ unsigned int j;
- return seq_list_next(v, &xt[af].match, pos);
+ trav->class = MTTG_TRAV_INIT;
+ for (j = 0; j < *pos; ++j)
+ if (xt_mttg_seq_next(seq, NULL, NULL, is_target) == NULL)
+ return NULL;
+ return trav;
}
-static void xt_match_seq_stop(struct seq_file *seq, void *v)
+static void xt_mttg_seq_stop(struct seq_file *seq, void *v)
{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
+ struct nf_mttg_trav *trav = seq->private;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ mutex_unlock(&xt[NFPROTO_UNSPEC].mutex);
+ break;
+ case MTTG_TRAV_NFP_SPEC:
+ mutex_unlock(&xt[trav->nfproto].mutex);
+ break;
+ }
+}
- mutex_unlock(&xt[af].mutex);
+static void *xt_match_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ return xt_mttg_seq_start(seq, pos, false);
}
-static int xt_match_seq_show(struct seq_file *seq, void *v)
+static void *xt_match_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct xt_match *match = list_entry(v, struct xt_match, list);
+ return xt_mttg_seq_next(seq, v, ppos, false);
+}
- if (strlen(match->name))
- return seq_printf(seq, "%s\n", match->name);
- else
- return 0;
+static int xt_match_seq_show(struct seq_file *seq, void *v)
+{
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_match *match;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ match = list_entry(trav->curr, struct xt_match, list);
+ return (*match->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", match->name);
+ }
+ return 0;
}
static const struct seq_operations xt_match_seq_ops = {
.start = xt_match_seq_start,
.next = xt_match_seq_next,
- .stop = xt_match_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_match_seq_show,
};
static int xt_match_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_match_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_match_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_match_ops = {
.open = xt_match_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
static void *xt_target_seq_start(struct seq_file *seq, loff_t *pos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_lock(&xt[af].mutex);
- return seq_list_start(&xt[af].target, *pos);
+ return xt_mttg_seq_start(seq, pos, true);
}
-static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+static void *xt_target_seq_next(struct seq_file *seq, void *v, loff_t *ppos)
{
- struct proc_dir_entry *pde = (struct proc_dir_entry *)seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- return seq_list_next(v, &xt[af].target, pos);
-}
-
-static void xt_target_seq_stop(struct seq_file *seq, void *v)
-{
- struct proc_dir_entry *pde = seq->private;
- u_int16_t af = (unsigned long)pde->data;
-
- mutex_unlock(&xt[af].mutex);
+ return xt_mttg_seq_next(seq, v, ppos, true);
}
static int xt_target_seq_show(struct seq_file *seq, void *v)
{
- struct xt_target *target = list_entry(v, struct xt_target, list);
-
- if (strlen(target->name))
- return seq_printf(seq, "%s\n", target->name);
- else
- return 0;
+ const struct nf_mttg_trav *trav = seq->private;
+ const struct xt_target *target;
+
+ switch (trav->class) {
+ case MTTG_TRAV_NFP_UNSPEC:
+ case MTTG_TRAV_NFP_SPEC:
+ if (trav->curr == trav->head)
+ return 0;
+ target = list_entry(trav->curr, struct xt_target, list);
+ return (*target->name == '\0') ? 0 :
+ seq_printf(seq, "%s\n", target->name);
+ }
+ return 0;
}
static const struct seq_operations xt_target_seq_ops = {
.start = xt_target_seq_start,
.next = xt_target_seq_next,
- .stop = xt_target_seq_stop,
+ .stop = xt_mttg_seq_stop,
.show = xt_target_seq_show,
};
static int xt_target_open(struct inode *inode, struct file *file)
{
+ struct seq_file *seq;
+ struct nf_mttg_trav *trav;
int ret;
- ret = seq_open(file, &xt_target_seq_ops);
- if (!ret) {
- struct seq_file *seq = file->private_data;
+ trav = kmalloc(sizeof(*trav), GFP_KERNEL);
+ if (trav == NULL)
+ return -ENOMEM;
- seq->private = PDE(inode);
+ ret = seq_open(file, &xt_target_seq_ops);
+ if (ret < 0) {
+ kfree(trav);
+ return ret;
}
- return ret;
+
+ seq = file->private_data;
+ seq->private = trav;
+ trav->nfproto = (unsigned long)PDE(inode)->data;
+ return 0;
}
static const struct file_operations xt_target_ops = {
.open = xt_target_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
};
#define FORMAT_TABLES "_tables_names"
struct recent_entry *e;
char buf[sizeof("+b335:1d35:1e55:dead:c0de:1715:5afe:c0de")];
const char *c = buf;
- union nf_inet_addr addr;
+ union nf_inet_addr addr = {};
u_int16_t family;
bool add, succ;
{
struct drr_sched *q = qdisc_priv(sch);
struct drr_class *cl = (struct drr_class *)*arg;
+ struct nlattr *opt = tca[TCA_OPTIONS];
struct nlattr *tb[TCA_DRR_MAX + 1];
u32 quantum;
int err;
- err = nla_parse_nested(tb, TCA_DRR_MAX, tca[TCA_OPTIONS], drr_policy);
+ if (!opt)
+ return -EINVAL;
+
+ err = nla_parse_nested(tb, TCA_DRR_MAX, opt, drr_policy);
if (err < 0)
return err;
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.27';
+my $V = '0.28';
use Getopt::Long qw(:config no_auto_abbrev);
__iomem|
__must_check|
__init_refok|
- __kprobes
+ __kprobes|
+ __ref
}x;
our $Attribute = qr{
const|
$realfile =~ s@^([^/]*)/@@;
$p1_prefix = $1;
- if ($tree && $p1_prefix ne '' && -e "$root/$p1_prefix") {
+ if (!$file && $tree && $p1_prefix ne '' &&
+ -e "$root/$p1_prefix") {
WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
}
}
# TEST: allow direct testing of the attribute matcher.
if ($dbg_attr) {
- if ($line =~ /^.\s*$Attribute\s*$/) {
+ if ($line =~ /^.\s*$Modifier\s*$/) {
ERROR("TEST: is attr\n" . $herecurr);
- } elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) {
+ } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
ERROR("TEST: is not attr ($1 is)\n". $herecurr);
}
next;
# * goes on variable not on type
# (char*[ const])
- if ($line =~ m{\($NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)*)\)}) {
+ if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) {
my ($from, $to) = ($1, $1);
# Should start with a space.
if ($from ne $to) {
ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr);
}
- } elsif ($line =~ m{\b$NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)?)($Ident)}) {
+ } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) {
my ($from, $to, $ident) = ($1, $1, $2);
# Should start with a space.
# Modifiers should have spaces.
$to =~ s/(\b$Modifier$)/$1 /;
- #print "from<$from> to<$to>\n";
- if ($from ne $to) {
+ #print "from<$from> to<$to> ident<$ident>\n";
+ if ($from ne $to && $ident !~ /^$Modifier$/) {
ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr);
}
}
if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
ERROR("space required before that '$op' $at\n" . $hereptr);
}
- if ($op eq '*' && $cc =~/\s*const\b/) {
+ if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
# A unary '*' may be const
} elsif ($ctx =~ /.xW/) {
- ERROR("space prohibited after that '$op' $at\n" . $hereptr);
+ ERROR("Aspace prohibited after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
if ($line =~ /\bin_atomic\s*\(/) {
if ($realfile =~ m@^drivers/@) {
ERROR("do not use in_atomic in drivers\n" . $herecurr);
- } else {
+ } elsif ($realfile !~ m@^kernel/@) {
WARN("use of in_atomic() is incorrect outside core kernel code\n" . $herecurr);
}
}
if (!S_ISSOCK(inode->i_mode) ||
((mask & (MAY_WRITE | MAY_APPEND)) == 0))
return 0;
-
sock = SOCKET_I(inode);
sk = sock->sk;
+ if (sk == NULL)
+ return 0;
sksec = sk->sk_security;
- if (sksec->nlbl_state != NLBL_REQUIRE)
+ if (sksec == NULL || sksec->nlbl_state != NLBL_REQUIRE)
return 0;
local_bh_disable();
lock_sock(sk);
rc = netlbl_sock_getattr(sk, &secattr);
release_sock(sk);
- if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE)
+ if (rc == 0)
rc = -EACCES;
+ else if (rc == -ENOMSG)
+ rc = 0;
netlbl_secattr_destroy(&secattr);
}
while (dst_frames1 > 0) {
S1 = S2;
if (src_frames1-- > 0) {
- S1 = *src;
+ S2 = *src;
src += src_step;
}
if (pos & ~R_MASK) {
of events. So all we need to keep the music playing is
to provide the sound hardware with new data upon
an interrupt from timer A. */
- mfp.tim_ct_a = 0; /* ++roman: Stop timer before programming! */
- mfp.tim_dt_a = 1; /* Cause interrupt after first event. */
- mfp.tim_ct_a = 8; /* Turn on event counting. */
+ st_mfp.tim_ct_a = 0; /* ++roman: Stop timer before programming! */
+ st_mfp.tim_dt_a = 1; /* Cause interrupt after first event. */
+ st_mfp.tim_ct_a = 8; /* Turn on event counting. */
/* Register interrupt handler. */
if (request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound",
AtaInterrupt))
return 0;
- mfp.int_en_a |= 0x20; /* Turn interrupt on. */
- mfp.int_mk_a |= 0x20;
+ st_mfp.int_en_a |= 0x20; /* Turn interrupt on. */
+ st_mfp.int_mk_a |= 0x20;
return 1;
}
#ifdef MODULE
static void AtaIrqCleanUp(void)
{
- mfp.tim_ct_a = 0; /* stop timer */
- mfp.int_en_a &= ~0x20; /* turn interrupt off */
+ st_mfp.tim_ct_a = 0; /* stop timer */
+ st_mfp.int_en_a &= ~0x20; /* turn interrupt off */
free_irq(IRQ_MFP_TIMA, AtaInterrupt);
}
#endif /* MODULE */
is_falcon = 0;
} else
return -ENODEV;
- if ((mfp.int_en_a & mfp.int_mk_a & 0x20) == 0)
+ if ((st_mfp.int_en_a & st_mfp.int_mk_a & 0x20) == 0)
return dmasound_init();
else {
printk("DMA sound driver: Timer A interrupt already in use\n");
MODULE_PARM_DESC(enable, "Enable Audiowerk2 soundcard.");
static struct pci_device_id snd_aw2_ids[] = {
- {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID,
+ {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, 0, 0,
0, 0, 0},
{0}
};
.ca0151_chip = 1,
.spk71 = 1,
.spdif_bug = 1,
+ .invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
.driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
{
struct snd_hwdep *hwdep = dev_get_drvdata(dev);
struct hda_codec *codec = hwdep->private_data;
- char *p;
- struct hda_verb verb, *v;
+ struct hda_verb *v;
+ int nid, verb, param;
- verb.nid = simple_strtoul(buf, &p, 0);
- verb.verb = simple_strtoul(p, &p, 0);
- verb.param = simple_strtoul(p, &p, 0);
- if (!verb.nid || !verb.verb || !verb.param)
+ if (sscanf(buf, "%i %i %i", &nid, &verb, ¶m) != 3)
+ return -EINVAL;
+ if (!nid || !verb)
return -EINVAL;
v = snd_array_new(&codec->init_verbs);
if (!v)
return -ENOMEM;
- *v = verb;
+ v->nid = nid;
+ v->verb = verb;
+ v->param = param;
return count;
}
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
+ /* conflict of ALC268 in slot#3 (digital I/O); a temporary fix */
+ SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba laptop", 0x03),
{}
};
case 0x106b3e00: /* iMac 24 Aluminium */
board_config = ALC885_IMAC24;
break;
+ case 0x106b00a0: /* MacBookPro3,1 - Another revision */
case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
case 0x106b00a4: /* MacbookPro4,1 */
case 0x106b2c00: /* Macbook Pro rev3 */
ALC888_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
ALC888_ACER_ASPIRE_4930G),
+ SND_PCI_QUIRK(0x1025, 0x0166, "Acer Aspire 6530G",
+ ALC888_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x1309, "HP xw4*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130a, "HP xw6*00", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x130b, "HP xw8*00", ALC262_HP_BPC),
+ SND_PCI_QUIRK(0x103c, 0x170b, "HP xw*", ALC262_HP_BPC),
SND_PCI_QUIRK(0x103c, 0x2800, "HP D7000", ALC262_HP_BPC_D7000_WL),
SND_PCI_QUIRK(0x103c, 0x2801, "HP D7000", ALC262_HP_BPC_D7000_WF),
SND_PCI_QUIRK(0x103c, 0x2802, "HP D7000", ALC262_HP_BPC_D7000_WL),
case STAC_DELL_M4_3:
spec->num_dmics = 1;
spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
+ spec->num_dmuxes = 1;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
int capture_chips;
int fw_file_set;
int firmware_num;
- int is_hr_stereo:1;
- int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
- int board_has_analog:1; /* if 0 the board is digital only */
- int board_has_mic:1; /* if 1 the board has microphone input */
- int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
- int mono_capture:1; /* if 1 the board does mono capture */
+ unsigned int is_hr_stereo:1;
+ unsigned int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
+ unsigned int board_has_analog:1; /* if 0 the board is digital only */
+ unsigned int board_has_mic:1; /* if 1 the board has microphone input */
+ unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
+ unsigned int mono_capture:1; /* if 1 the board does mono capture */
struct snd_dma_buffer hostport;
projects / linux-2.6-omap-h63xx.git / commitdiff