[PATCH] sis190: basic sis191 support

The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 7d8bcb38797a1474b3daf70a9ab36df23557e045..7a56556c9712d3f3f12c978719b302270a2d2954 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1924,12 +1924,15 @@ config R8169_VLAN
          If in doubt, say Y.
 
 config SIS190
-       tristate "SiS190 gigabit ethernet support"
+       tristate "SiS190/SiS191 gigabit ethernet support"
        depends on PCI
        select CRC32
        select MII
        ---help---
-         Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+         Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+         a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+         appear in lan on motherboard designs which are based on SiS 965
+         and SiS 966 south bridge.
 
          To compile this driver as a module, choose M here: the module
          will be called sis190.  This is recommended.

diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 61a24a944b8760e6d59c11686ac5445c5422c343..92f75529eff82cf91bd0780052c29f0f6092c6bd 100644 (file)
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -331,14 +331,14 @@ static struct mii_chip_info {
 
 const static struct {
        const char *name;
-       u8 version;             /* depend on docs */
-       u32 RxConfigMask;       /* clear the bits supported by this chip */
 } sis_chip_info[] = {
-       { DRV_NAME, 0x00, 0xff7e1880, },
+       { "SiS 190 PCI Fast Ethernet adapter" },
+       { "SiS 191 PCI Gigabit Ethernet adapter" },
 };
 
 static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
        { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+       { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
        { 0, },
 };