powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/

This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/
directory. The new location suggested by Kumar Gala: as the driver is
83xx specific it's placed into arch/powerpc/platforms/83xx/.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index ba5028e2989065a7484733b0833fda94fdf78354..051777c542c74ac741225f7a070968fd56c31514 100644 (file)
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -3,6 +3,7 @@
 #
 obj-y                          := misc.o usb.o
 obj-$(CONFIG_SUSPEND)          += suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
 obj-$(CONFIG_MPC831x_RDB)      += mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)      += mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)      += mpc834x_mds.o

diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
similarity index 100%
rename from drivers/i2c/chips/mcu_mpc8349emitx.c
rename to arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47fe2bea9865db32befbbdff10e8a14d2325de19..200b9cb900ea4b34280d270b51bebe773ca142b4 100644 (file)
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -323,4 +323,15 @@ config SIMPLE_GPIO
          chip-selects, Ethernet/USB PHY's power and various other small
          on-board peripherals.
 
+config MCU_MPC8349EMITX
+       tristate "MPC8349E-mITX MCU driver"
+       depends on I2C && PPC_83xx
+       select GENERIC_GPIO
+       select ARCH_REQUIRE_GPIOLIB
+       help
+         Say Y here to enable soft power-off functionality on the Freescale
+         boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+         also register MCU GPIOs with the generic GPIO API, so you'll able
+         to use MCU pins as GPIOs.
+
 endmenu

diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 59c3d23f5bdccdf54e0dbc7d5099e136ad7768e8..b9bef04b7be4fffb9eace1743621e98f7d0d47eb 100644 (file)
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -139,15 +139,4 @@ config SENSORS_TSL2550
          This driver can also be built as a module.  If so, the module
          will be called tsl2550.
 
-config MCU_MPC8349EMITX
-       tristate "MPC8349E-mITX MCU driver"
-       depends on I2C && PPC_83xx
-       select GENERIC_GPIO
-       select ARCH_REQUIRE_GPIOLIB
-       help
-         Say Y here to enable soft power-off functionality on the Freescale
-         boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-         also register MCU GPIOs with the generic GPIO API, so you'll able
-         to use MCU pins as GPIOs.
-
 endmenu

diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 83accaaf8164bfcc81397da82e363ee25e20434d..00fcb5193ac2c2fbe814193cfce09d114abe3631 100644 (file)
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
 obj-$(CONFIG_PCF8575)          += pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)  += pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)  += tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG