leds: leds-gpio for ngw100

Add GPIO leds to the NGW100 platform and its defconfig.
Access through /sys/class/leds/{a,b,sys}/* files; one
defaults to a heartbeat.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 6c4dc0a00e9f0e8ffd0ddbf27d0074d01dbffaa4..2edcecdea8bdd3402c2e323e0afceb7c7937bb83 100644 (file)
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/leds.h>
 #include <linux/spi/spi.h>
 
 #include <asm/io.h>
@@ -21,6 +22,7 @@
 #include <asm/arch/at32ap7000.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
+#include <asm/arch/portmux.h>
 
 /* Initialized by bootloader-specific startup code. */
 struct tag *bootloader_tags __initdata;
@@ -100,8 +102,31 @@ void __init setup_board(void)
        at32_setup_serial_console(0);
 }
 
+static const struct gpio_led ngw_leds[] = {
+       { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
+               .default_trigger = "heartbeat",
+       },
+       { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
+       { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
+};
+
+static const struct gpio_led_platform_data ngw_led_data = {
+       .num_leds =     ARRAY_SIZE(ngw_leds),
+       .leds =         (void *) ngw_leds,
+};
+
+static struct platform_device ngw_gpio_leds = {
+       .name =         "leds-gpio",
+       .id =           -1,
+       .dev = {
+               .platform_data = (void *) &ngw_led_data,
+       }
+};
+
 static int __init atngw100_init(void)
 {
+       unsigned        i;
+
        /*
         * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
         * reserve any pins for it.
@@ -116,6 +141,12 @@ static int __init atngw100_init(void)
 
        at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
 
+       for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
+               at32_select_gpio(ngw_leds[i].gpio,
+                               AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+       }
+       platform_device_register(&ngw_gpio_leds);
+
        return 0;
 }
 postcore_initcall(atngw100_init);

diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 49493ad3b5a976b7d24b47b11971e01f0a83075f..b799a68ffd9706d74afef2942d0ef0ea45b302ab 100644 (file)
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -712,7 +712,21 @@ CONFIG_SPI_ATMEL=y
 #
 # LED devices
 #
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
 
 #
 # LED drivers