/*
* linux/drivers/i2c/i2c-omap.c
*
- * TI OMAP I2C unified algorith+adapter driver (inspired by i2c-ibm_iic.c and i2c-omap1510.c)
+ * TI OMAP I2C master mode driver
*
* Copyright (C) 2003 MontaVista Software, Inc.
- *
* Copyright (C) 2004 Texas Instruments.
*
* ----------------------------------------------------------------------------
- * This file was highly leveraged from i2c-elektor.c, which was created
- * by Simon G. Vogl and Hans Berglund:
- *
+ * This file was highly leveraged from i2c-elektor.c:
*
* Copyright 1995-97 Simon G. Vogl
* 1998-99 Hans Berglund
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- Modifications:
- ver. 1.1: Nov 2003, MontaVista Software
- - added DPM support
- ver. 1.2: Feb 2004, Texas Instruments
- - Ported to 2.6 kernel (Feb 2004)
- - Added support for I2C_M_IGNORE_NAK option.
- ver. 1.3: Mar 2004, Juha Yrjölä <juha.yrjola@nokia.com>
- - Cleaned up
- ver. 1.4: Aug 2004, Thiago Radicchi <trr@dcc.ufmg.br> DCC-UFMG / iNdT
- - Updated omap_i2c_isr to remove messages of too much work in one IRQ,
- by reading the interrupt vector, as specified on ref [1]
- ver. 1.5: Oct 2004, Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- - Changed clock handling
- *
- * REFERENCES:
- *
- * 1. OMAP5910 Dual-Core Processor Inter-Integrated Circuit (I2C)
- * Controller Reference Guide
- * Document number: spru681
- * Date: October 2003
- * http://www-s.ti.com/sc/psheets/spru681/spru681.pdf
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include "i2c-omap.h"
-/* ----- global defines ----------------------------------------------- */
-#define MODULE_NAME "OMAP I2C"
-#define OMAP_I2C_TIMEOUT (1*HZ) /* timeout waiting for an I2C transaction */
+#undef I2C_OMAP_DEBUG
+
+
+/* ----- debug defines ----------------------------------------------- */
-#define I2C_OMAP_DEBUG
#ifdef I2C_OMAP_DEBUG
static int i2c_debug = 0;
+
+module_param(i2c_debug, int, 0);
+MODULE_PARM_DESC(i2c_debug,
+ "debug level - 0 off; 1 normal; 2,3 more verbose; "
+ "9 omap-protocol");
+
#define DEB0(format, arg...) printk(KERN_DEBUG MODULE_NAME " DEBUG: " format "\n", ## arg )
#define DEB1(format, arg...) \
if (i2c_debug>=1) { \
#define DEB9(fmt, args...)
#endif
+/* ----- global defines ----------------------------------------------- */
+static const char driver_name[] = "i2c_omap";
+
+#define MODULE_NAME "OMAP I2C"
+#define OMAP_I2C_TIMEOUT (1*HZ) /* timeout waiting for an I2C transaction */
+
#define err(format, arg...) printk(KERN_ERR MODULE_NAME " ERROR: " format "\n", ## arg )
-#define info(format, arg...) printk(KERN_INFO MODULE_NAME ": " format "\n", ## arg )
-#define warn(format, arg...) printk(KERN_WARNING MODULE_NAME " WARNING: " format "\n", ## arg )
-#define emerg(format, arg...) printk(KERN_EMERG MODULE_NAME " EMERGENCY: " format "\n", ## arg )
#ifdef CONFIG_ARCH_OMAP1510
#define omap_i2c_rev1() (readw(OMAP_I2C_REV) < 0x20)
#define omap_i2c_rev1() 0
#endif
-#define DEFAULT_OWN 1 /*default own I2C address */
+#define DEFAULT_OWN 1 /* default own I2C address */
#define MAX_MESSAGES 65536 /* max number of messages */
static int clock = 100; /* Default: Fast Mode = 400 KHz, Standard Mode = 100 KHz */
+module_param(clock, int, 0);
+MODULE_PARM_DESC(clock,
+ "Set I2C clock in KHz: 100 (Standard Mode) or 400 (Fast Mode)");
+
static int own;
-static int i2c_scan; /* have a look at what's hanging 'round */
+module_param(own, int, 0);
+MODULE_PARM_DESC(own, "Address of OMAP i2c master (0 for default == 1)");
+
static struct omap_i2c_dev {
int cmd_complete, cmd_err;
size_t buf_len;
} omap_i2c_dev;
+/* FIXME pass "sparse": convert {read,write}w() with iomapped addresses
+ * to omap_{read,write}w() with physical addresses.
+ */
-static int omap_i2c_reset(void)
+static void omap_i2c_reset(void)
{
unsigned long timeout;
u16 psc;
struct clk *armxor_ck;
unsigned long armxor_rate;
- if(!cpu_is_omap1510()) {
-
+ if (!omap_i2c_rev1())
writew(OMAP_I2C_SYSC_SRST, OMAP_I2C_SYSC); /*soft reset */
- }
- else {
+ else
writew(OMAP_I2C_CON_RST, OMAP_I2C_CON); /* reset */
- }
- armxor_ck = clk_get(0, "armxor_ck");
+ armxor_ck = clk_get(NULL, "armxor_ck");
if (IS_ERR(armxor_ck)) {
printk(KERN_WARNING "i2c: Could not obtain armxor_ck rate.\n");
armxor_rate = 12000000;
/* Take the I2C module out of reset: */
writew(OMAP_I2C_CON_EN, OMAP_I2C_CON);
- if(!cpu_is_omap1510()){
+ if (!omap_i2c_rev1()){
timeout = jiffies + OMAP_I2C_TIMEOUT;
while (!(readw(OMAP_I2C_SYSS) & OMAP_I2C_SYSS_RDONE)) {
if (time_after(jiffies, timeout)) {
err("timeout waiting for I2C reset complete");
- return -EFAULT;
+ break;
}
- schedule_timeout(1);
+ msleep(1);
}
}
-
- return 0;
-
}
/*
timeout = jiffies + OMAP_I2C_TIMEOUT;
while (readw(OMAP_I2C_STAT) & OMAP_I2C_STAT_BB) {
if (time_after(jiffies, timeout)) {
- warn("timeout waiting for bus ready");
+ printk(KERN_WARNING "timeout waiting for bus ready\n");
return -ETIMEDOUT;
}
if (allow_sleep)
static int
omap_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
{
- struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
- u8 zero_byte = 0;
+ struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
+ u8 zero_byte = 0;
int r;
u16 w;
if (msg->flags & I2C_M_IGNORE_NAK)
return msg->len;
if (stop)
- writew(readw(OMAP_I2C_CON) | OMAP_I2C_CON_STP, OMAP_I2C_CON);
+ writew(readw(OMAP_I2C_CON) | OMAP_I2C_CON_STP,
+ OMAP_I2C_CON);
return -EREMOTEIO;
}
- if (dev->cmd_err & OMAP_I2C_STAT_AL ||
- dev->cmd_err & OMAP_I2C_STAT_ROVR ||
- dev->cmd_err & OMAP_I2C_STAT_XUDF) {
+ if ((OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR | OMAP_I2C_STAT_XUDF)
+ & dev->cmd_err) {
omap_i2c_reset();
return -EIO;
}
}
/*
- * Prepare controller for a transaction and call omap_i2c_rxbytes
- * to do the work.
+ * Prepare controller for a transaction and call omap_i2c_xfer_msg
+ * to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (msgs[i].buf == NULL)
return -EINVAL;
+// REVISIT: initialize and use adap->retries
+
if ((r = omap_i2c_wait_for_bb(1)) < 0)
return r;
return r;
}
-/*
- * Sanity check for the adapter hardware - check the reaction of
- * the bus lines only if it seems to be idle.
- *
- * Scan the I2C bus for valid 7 bit addresses
- * (ie things that ACK on 1byte read)
- * if i2c_debug is off we print everything on one line.
- * if i2c_debug is on we do a newline per print so we don't
- * clash too much with printf's in the other functions.
- * TODO: check for 10-bit mode and never run as a slave.
- */
-static int
-omap_i2c_scan_bus(struct i2c_adapter *adap)
-{
- int found = 0;
- int i;
- struct i2c_msg msg;
- char data[1];
-
- info("scanning for active I2C devices on the bus...");
-
- for (i = 1; i < 0x7f; i++) {
- if (readw(OMAP_I2C_OA) == i)
- continue;
-
- msg.addr = i;
- msg.buf = data;
- msg.len = 0;
- msg.flags = I2C_M_RD;
-
- if (omap_i2c_xfer(adap, &msg, 1) == 0) {
- info("I2C device 0x%02x found", i);
- found++;
- }
- }
-
- if (!found)
- info("found nothing");
-
- return found;
-}
-
-
static u32
omap_i2c_func(struct i2c_adapter *adap)
{
while ((stat = readw(OMAP_I2C_STAT)) & bits) {
if (count++ == 100) {
- warn("Too much work in one IRQ");
+ printk(KERN_WARNING "Too much work in one IRQ\n");
break;
}
continue;
}
if (stat & OMAP_I2C_STAT_ROVR) {
- warn("Receive overrun");
+ pr_debug("Receive overrun\n");
dev->cmd_err |= OMAP_I2C_STAT_ROVR;
}
if (stat & OMAP_I2C_STAT_XUDF) {
- warn("Transmit overflow");
+ pr_debug("Transmit overflow\n");
dev->cmd_err |= OMAP_I2C_STAT_XUDF;
}
if (stat & OMAP_I2C_STAT_NACK) {
writew(OMAP_I2C_CON_STP, OMAP_I2C_CON);
}
if (stat & OMAP_I2C_STAT_AL) {
- warn("Arbitration lost");
+ pr_debug("Arbitration lost\n");
dev->cmd_err |= OMAP_I2C_STAT_AL;
omap_i2c_complete_cmd(dev);
}
}
static struct i2c_algorithm omap_i2c_algo = {
- .name = "OMAP I2C algorithm",
- .id = I2C_ALGO_EXP,
- .master_xfer = omap_i2c_xfer,
- .smbus_xfer = NULL,
- .slave_send = NULL,
- .slave_recv = NULL,
- .algo_control = NULL,
- .functionality = omap_i2c_func,
+ .name = "OMAP I2C algorithm",
+ .id = I2C_ALGO_EXP,
+ .master_xfer = omap_i2c_xfer,
+ .functionality = omap_i2c_func,
};
static struct i2c_adapter omap_i2c_adap = {
- .owner = THIS_MODULE,
- .name = "OMAP I2C adapter",
- .id = I2C_ALGO_EXP, /* REVISIT: register for id */
- .algo = &omap_i2c_algo,
- .algo_data = NULL,
- .client_register = NULL,
- .client_unregister = NULL,
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON,
+ .name = "OMAP I2C adapter",
+ .algo = &omap_i2c_algo,
};
static struct device_driver omap_i2c_driver = {
{
int r;
- info("Driver ver. 1.3");
- DEB0("%s %s", __TIME__, __DATE__);
+ r = (int) request_mem_region(io_v2p(OMAP_I2C_BASE), OMAP_I2C_IOSIZE,
+ driver_name);
+ if (!r) {
+ pr_debug("%s: I2C region already claimed\n", driver_name);
+ return -EBUSY;
+ }
if (clock > 200)
clock = 400; /*Fast mode */
if (own < 1 || own > 0x7f)
own = DEFAULT_OWN;
- memset(&omap_i2c_dev, 0, sizeof(omap_i2c_dev));
+ memset(&omap_i2c_dev, 0, sizeof(omap_i2c_dev));
init_waitqueue_head(&omap_i2c_dev.cmd_wait);
- r = (int) request_region(OMAP_I2C_BASE, OMAP_I2C_IOSIZE, MODULE_NAME);
- if (!r) {
- err("I2C is already in use");
- return -ENODEV;
- }
-
- r = request_irq(INT_I2C, omap_i2c_isr, 0, MODULE_NAME, &omap_i2c_dev);
+ r = request_irq(INT_I2C, omap_i2c_isr, 0, driver_name, &omap_i2c_dev);
if (r) {
- err("failed to request I2C IRQ");
- goto do_release_region;
+ pr_debug("%s: failure requesting irq\n", driver_name);
+ goto do_release_region;
}
+ r = readw(OMAP_I2C_REV) & 0xff;
+ pr_info("%s: rev%d.%d at %d KHz\n", driver_name,
+ r >> 4, r & 0xf, clock);
+
i2c_set_adapdata(&omap_i2c_adap, &omap_i2c_dev);
r = i2c_add_adapter(&omap_i2c_adap);
if (r) {
- err("failed to add adapter");
- goto do_free_irq;
- return r;
+ pr_debug("%s: failure adding adapter\n", driver_name);
+ goto do_free_irq;
}
/* configure I/O pin multiplexing */
omap_i2c_reset();
- if (i2c_scan)
- omap_i2c_scan_bus(&omap_i2c_adap);
if(driver_register(&omap_i2c_driver) != 0)
printk(KERN_ERR "Driver register failed for omap_i2c\n");
if(platform_device_register(&omap_i2c_device) != 0) {
return 0;
do_free_irq:
- free_irq(INT_I2C, &omap_i2c_dev);
+ free_irq(INT_I2C, &omap_i2c_dev);
do_release_region:
- release_region(OMAP_I2C_BASE, OMAP_I2C_IOSIZE);
+ release_region(io_v2p(OMAP_I2C_BASE), OMAP_I2C_IOSIZE);
return r;
}
i2c_del_adapter(&omap_i2c_adap);
writew(0, OMAP_I2C_CON);
free_irq(INT_I2C, &omap_i2c_dev);
- release_region(OMAP_I2C_BASE, OMAP_I2C_IOSIZE);
+ release_region(io_v2p(OMAP_I2C_BASE), OMAP_I2C_IOSIZE);
driver_unregister(&omap_i2c_driver);
platform_device_unregister(&omap_i2c_device);
}
-MODULE_AUTHOR("MontaVista Software, Inc.");
-MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
-MODULE_LICENSE("GPL");
-
-module_param(clock, int, 0);
-MODULE_PARM_DESC(clock,
- "Set I2C clock in KHz: 100 (Standard Mode) or 400 (Fast Mode)");
-
-module_param(own, int, 0);
-
-module_param(i2c_scan, int, 0);
-MODULE_PARM_DESC(i2c_scan, "Scan for active I2C clients on the bus");
-
-#ifdef I2C_OMAP_DEBUG
-module_param(i2c_debug, int, 0);
-MODULE_PARM_DESC(i2c_debug,
- "debug level - 0 off; 1 normal; 2,3 more verbose; "
- "9 omap-protocol");
-#endif
-
/* i2c may be needed to bring up other drivers */
subsys_initcall(omap_i2c_init);
module_exit(omap_i2c_exit);
+
+MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
+MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
+MODULE_LICENSE("GPL");
projects / linux-2.6-omap-h63xx.git / commitdiff