From: David Hollis Date: Fri, 22 Apr 2005 22:07:02 +0000 (-0700) Subject: [PATCH] usbnet: Convert ASIX code to use new status infrastructure X-Git-Tag: v2.6.12-rc4~213^2~2 X-Git-Url: http://pilppa.org/gitweb/?a=commitdiff_plain;h=7ea13c9c0e40d24c5f45a3a6bee8a2a39bfb1df4;p=linux-2.6-omap-h63xx.git [PATCH] usbnet: Convert ASIX code to use new status infrastructure Modify the ASIX USB Ethernet code to make use of the new status infrastructure in usbnet. Additionally, add a link_reset() handler to the struct usbnet structure to provide a generic means for a driver to perform link reset tasks such as a determining link speed and setting device flags accordingly. Signed-off-by: David Hollis Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index bbaef047d53..0eefc14449a 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -210,6 +210,7 @@ struct usbnet { # define EVENT_RX_HALT 1 # define EVENT_RX_MEMORY 2 # define EVENT_STS_SPLIT 3 +# define EVENT_LINK_RESET 4 }; // device-specific info used by the driver @@ -243,6 +244,9 @@ struct driver_info { /* for status polling */ void (*status)(struct usbnet *, struct urb *); + /* link reset handling, called from defer_kevent */ + int (*link_reset)(struct usbnet *); + /* fixup rx packet (strip framing) */ int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb); @@ -304,6 +308,7 @@ static void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *); static u32 usbnet_get_link (struct net_device *); static u32 usbnet_get_msglevel (struct net_device *); static void usbnet_set_msglevel (struct net_device *, u32); +static void defer_kevent (struct usbnet *, int); /* mostly for PDA style devices, which are always connected if present */ static int always_connected (struct usbnet *dev) @@ -501,6 +506,7 @@ static const struct driver_info an2720_info = { #define AX_CMD_WRITE_MULTI_FILTER 0x16 #define AX_CMD_READ_NODE_ID 0x17 #define AX_CMD_READ_PHY_ID 0x19 +#define AX_CMD_READ_MEDIUM_STATUS 0x1a #define AX_CMD_WRITE_MEDIUM_MODE 0x1b #define AX_CMD_READ_MONITOR_MODE 0x1c #define AX_CMD_WRITE_MONITOR_MODE 0x1d @@ -515,11 +521,14 @@ static const struct driver_info an2720_info = { #define AX_MONITOR_MAGIC 0x04 #define AX_MONITOR_HSFS 0x10 +/* AX88172 Medium Status Register values */ +#define AX_MEDIUM_FULL_DUPLEX 0x02 +#define AX_MEDIUM_TX_ABORT_ALLOW 0x04 +#define AX_MEDIUM_FLOW_CONTROL_EN 0x10 + #define AX_MCAST_FILTER_SIZE 8 #define AX_MAX_MCAST 64 -#define AX_INTERRUPT_BUFSIZE 8 - #define AX_EEPROM_LEN 0x40 #define AX_SWRESET_CLEAR 0x00 @@ -535,15 +544,33 @@ static const struct driver_info an2720_info = { #define AX88772_IPG1_DEFAULT 0x0c #define AX88772_IPG2_DEFAULT 0x12 +#define AX88772_MEDIUM_FULL_DUPLEX 0x0002 +#define AX88772_MEDIUM_RESERVED 0x0004 +#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010 +#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020 +#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080 +#define AX88772_MEDIUM_RX_ENABLE 0x0100 +#define AX88772_MEDIUM_100MB 0x0200 +#define AX88772_MEDIUM_DEFAULT \ + (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \ + AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \ + AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE ) + #define AX_EEPROM_MAGIC 0xdeadbeef /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ struct ax8817x_data { u8 multi_filter[AX_MCAST_FILTER_SIZE]; - struct urb *int_urb; - u8 *int_buf; }; +struct ax88172_int_data { + u16 res1; + u8 link; + u16 res2; + u8 status; + u16 res3; +} __attribute__ ((packed)); + static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, u16 size, void *data) { @@ -586,25 +613,23 @@ static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs) usb_free_urb(urb); } -static void ax8817x_interrupt_complete(struct urb *urb, struct pt_regs *regs) +static void ax8817x_status(struct usbnet *dev, struct urb *urb) { - struct usbnet *dev = (struct usbnet *)urb->context; - struct ax8817x_data *data = (struct ax8817x_data *)&dev->data; + struct ax88172_int_data *event; int link; - if (urb->status < 0) { - devdbg(dev,"ax8817x_interrupt_complete() failed with %d", - urb->status); - } else { - link = data->int_buf[2] & 0x01; - if (netif_carrier_ok(dev->net) != link) { - if (link) - netif_carrier_on(dev->net); - else - netif_carrier_off(dev->net); - devdbg(dev, "ax8817x - Link Status is: %d", link); - } - usb_submit_urb(data->int_urb, GFP_ATOMIC); + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + if (link) { + netif_carrier_on(dev->net); + defer_kevent (dev, EVENT_LINK_RESET ); + } else + netif_carrier_off(dev->net); + devdbg(dev, "ax8817x - Link Status is: %d", link); } } @@ -711,6 +736,20 @@ static void ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, i ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf); } +static int ax88172_link_reset(struct usbnet *dev) +{ + u16 lpa; + u8 mode; + + mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN; + lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA); + if (lpa & LPA_DUPLEX) + mode |= AX_MEDIUM_FULL_DUPLEX; + ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + + return 0; +} + static void ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { struct usbnet *dev = netdev_priv(net); @@ -824,35 +863,13 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf) void *buf; int i; unsigned long gpio_bits = dev->driver_info->data; - struct ax8817x_data *data = (struct ax8817x_data *)dev->data; get_endpoints(dev,intf); - if ((data->int_urb = usb_alloc_urb (0, GFP_KERNEL)) == NULL) { - dbg ("%s: cannot allocate interrupt URB", - dev->net->name); - ret = -ENOMEM; - goto out1; - } - - if ((data->int_buf = kmalloc(AX_INTERRUPT_BUFSIZE, GFP_KERNEL)) == NULL) { - dbg ("%s: cannot allocate memory for interrupt buffer", - dev->net->name); - ret = -ENOMEM; - goto out1; - } - memset(data->int_buf, 0, AX_INTERRUPT_BUFSIZE); - - usb_fill_int_urb (data->int_urb, dev->udev, - usb_rcvintpipe (dev->udev, 1), - data->int_buf, AX_INTERRUPT_BUFSIZE, - ax8817x_interrupt_complete, dev, - dev->udev->speed == USB_SPEED_HIGH ? 8 : 100); - buf = kmalloc(ETH_ALEN, GFP_KERNEL); if(!buf) { ret = -ENOMEM; - goto out2; + goto out1; } /* Toggle the GPIOs in a manufacturer/model specific way */ @@ -860,32 +877,32 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf) if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, (gpio_bits >> (i * 8)) & 0xff, 0, 0, buf)) < 0) - goto out3; + goto out2; msleep(5); } if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf)) < 0) { dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret); - goto out3; + goto out2; } /* Get the MAC address */ memset(buf, 0, ETH_ALEN); if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) { dbg("read AX_CMD_READ_NODE_ID failed: %d", ret); - goto out3; + goto out2; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); /* Get the PHY id */ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) { dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret); - goto out3; + goto out2; } else if (ret < 2) { /* this should always return 2 bytes */ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret); ret = -EIO; - goto out3; + goto out2; } /* Initialize MII structure */ @@ -899,36 +916,18 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->set_multicast_list = ax8817x_set_multicast; dev->net->ethtool_ops = &ax8817x_ethtool_ops; - ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, - cpu_to_le16(BMCR_RESET)); + ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - cpu_to_le16(ADVERTISE_ALL | ADVERTISE_CSMA | 0x0400)); + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); mii_nway_restart(&dev->mii); - if((ret = usb_submit_urb(data->int_urb, GFP_KERNEL)) < 0) { - dbg("Failed to submit interrupt URB: %02x", ret); - goto out2; - } - return 0; -out3: - kfree(buf); out2: - kfree(data->int_buf); + kfree(buf); out1: - usb_free_urb(data->int_urb); return ret; } -static void ax8817x_unbind(struct usbnet *dev, struct usb_interface *intf) -{ - struct ax8817x_data *data = (struct ax8817x_data *)dev->data; - - usb_kill_urb(data->int_urb); - usb_free_urb(data->int_urb); - kfree(data->int_buf); -} - static struct ethtool_ops ax88772_ethtool_ops = { .get_drvinfo = ax8817x_get_drvinfo, .get_link = ethtool_op_get_link, @@ -946,64 +945,44 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) { int ret; void *buf; - struct ax8817x_data *data = (struct ax8817x_data *)dev->data; get_endpoints(dev,intf); - if ((data->int_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) { - dbg ("Cannot allocate interrupt URB"); - ret = -ENOMEM; - goto out1; - } - - if ((data->int_buf = kmalloc(AX_INTERRUPT_BUFSIZE, GFP_KERNEL)) == NULL) { - dbg ("Cannot allocate memory for interrupt buffer"); - ret = -ENOMEM; - goto out1; - } - memset(data->int_buf, 0, AX_INTERRUPT_BUFSIZE); - - usb_fill_int_urb (data->int_urb, dev->udev, - usb_rcvintpipe (dev->udev, 1), - data->int_buf, AX_INTERRUPT_BUFSIZE, - ax8817x_interrupt_complete, dev, - dev->udev->speed == USB_SPEED_HIGH ? 8 : 100); - buf = kmalloc(6, GFP_KERNEL); if(!buf) { dbg ("Cannot allocate memory for buffer"); ret = -ENOMEM; - goto out2; + goto out1; } if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS, 0x00B0, 0, 0, buf)) < 0) - goto out3; + goto out2; msleep(5); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0x0001, 0, 0, buf)) < 0) { dbg("Select PHY #1 failed: %d", ret); - goto out3; + goto out2; } if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, 0, 0, buf)) < 0) { dbg("Failed to power down internal PHY: %d", ret); - goto out3; + goto out2; } msleep(150); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, 0, 0, buf)) < 0) { dbg("Failed to perform software reset: %d", ret); - goto out3; + goto out2; } msleep(150); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) { dbg("Failed to set Internal/External PHY reset control: %d", ret); - goto out3; + goto out2; } msleep(150); @@ -1011,27 +990,27 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0000, 0, 0, buf)) < 0) { dbg("Failed to reset RX_CTL: %d", ret); - goto out3; + goto out2; } /* Get the MAC address */ memset(buf, 0, ETH_ALEN); if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) { dbg("Failed to read MAC address: %d", ret); - goto out3; + goto out2; } memcpy(dev->net->dev_addr, buf, ETH_ALEN); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, buf)) < 0) { dbg("Enabling software MII failed: %d", ret); - goto out3; + goto out2; } if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, 0x0010, 2, 2, buf)) < 0) || (*((u16 *)buf) != 0x003b)) { dbg("Read PHY register 2 must be 0x3b00: %d", ret); - goto out3; + goto out2; } /* Initialize MII structure */ @@ -1044,26 +1023,26 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) /* Get the PHY id */ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) { dbg("Error reading PHY ID: %02x", ret); - goto out3; + goto out2; } else if (ret < 2) { /* this should always return 2 bytes */ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret); ret = -EIO; - goto out3; + goto out2; } dev->mii.phy_id = *((u8 *)buf + 1); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, 0, 0, buf)) < 0) { dbg("Set external PHY reset pin level: %d", ret); - goto out3; + goto out2; } msleep(150); if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) { dbg("Set Internal/External PHY reset control: %d", ret); - goto out3; + goto out2; } msleep(150); @@ -1071,25 +1050,24 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->set_multicast_list = ax8817x_set_multicast; dev->net->ethtool_ops = &ax88772_ethtool_ops; - ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, - cpu_to_le16(BMCR_RESET)); + ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, - cpu_to_le16(ADVERTISE_ALL | ADVERTISE_CSMA)); + ADVERTISE_ALL | ADVERTISE_CSMA); mii_nway_restart(&dev->mii); - if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, 0x0336, 0, 0, buf)) < 0) { + if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) { dbg("Write medium mode register: %d", ret); - goto out3; + goto out2; } if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,AX88772_IPG2_DEFAULT, 0, buf)) < 0) { dbg("Write IPG,IPG1,IPG2 failed: %d", ret); - goto out3; + goto out2; } if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) { dbg("Failed to set hardware MII: %02x", ret); - goto out3; + goto out2; } /* Set RX_CTL to default values with 2k buffer, and enable cactus */ @@ -1097,25 +1075,16 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0, buf)) < 0) { dbg("Reset RX_CTL failed: %d", ret); - goto out3; - } - - if((ret = usb_submit_urb(data->int_urb, GFP_KERNEL)) < 0) { - dbg("Failed to submit interrupt URB: %02x", ret); - goto out3; + goto out2; } kfree(buf); return 0; -out3: - kfree(buf); out2: - kfree(data->int_buf); + kfree(buf); out1: - usb_free_urb(data->int_urb); - return ret; } @@ -1213,10 +1182,29 @@ static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb, return skb; } +static int ax88772_link_reset(struct usbnet *dev) +{ + u16 lpa; + u16 mode; + + mode = AX88772_MEDIUM_DEFAULT; + lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA); + + if ((lpa & LPA_DUPLEX) == 0) + mode &= ~AX88772_MEDIUM_FULL_DUPLEX; + if ((lpa & LPA_100) == 0) + mode &= ~AX88772_MEDIUM_100MB; + ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + + return 0; +} + static const struct driver_info ax8817x_info = { .description = "ASIX AX8817x USB 2.0 Ethernet", .bind = ax8817x_bind, - .unbind = ax8817x_unbind, + .status = ax8817x_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, .flags = FLAG_ETHER, .data = 0x00130103, }; @@ -1224,7 +1212,9 @@ static const struct driver_info ax8817x_info = { static const struct driver_info dlink_dub_e100_info = { .description = "DLink DUB-E100 USB Ethernet", .bind = ax8817x_bind, - .unbind = ax8817x_unbind, + .status = ax8817x_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, .flags = FLAG_ETHER, .data = 0x009f9d9f, }; @@ -1232,7 +1222,9 @@ static const struct driver_info dlink_dub_e100_info = { static const struct driver_info netgear_fa120_info = { .description = "Netgear FA-120 USB Ethernet", .bind = ax8817x_bind, - .unbind = ax8817x_unbind, + .status = ax8817x_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, .flags = FLAG_ETHER, .data = 0x00130103, }; @@ -1240,7 +1232,9 @@ static const struct driver_info netgear_fa120_info = { static const struct driver_info hawking_uf200_info = { .description = "Hawking UF200 USB Ethernet", .bind = ax8817x_bind, - .unbind = ax8817x_unbind, + .status = ax8817x_status, + .link_reset = ax88172_link_reset, + .reset = ax88172_link_reset, .flags = FLAG_ETHER, .data = 0x001f1d1f, }; @@ -1248,7 +1242,9 @@ static const struct driver_info hawking_uf200_info = { static const struct driver_info ax88772_info = { .description = "ASIX AX88772 USB 2.0 Ethernet", .bind = ax88772_bind, - .unbind = ax8817x_unbind, + .status = ax8817x_status, + .link_reset = ax88772_link_reset, + .reset = ax88772_link_reset, .flags = FLAG_ETHER | FLAG_FRAMING_AX, .rx_fixup = ax88772_rx_fixup, .tx_fixup = ax88772_tx_fixup, @@ -3307,6 +3303,19 @@ kevent (void *data) } } + if (test_bit (EVENT_LINK_RESET, &dev->flags)) { + struct driver_info *info = dev->driver_info; + int retval = 0; + + clear_bit (EVENT_LINK_RESET, &dev->flags); + if(info->link_reset && (retval = info->link_reset(dev)) < 0) { + devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s", + retval, + dev->udev->bus->bus_name, dev->udev->devpath, + info->description); + } + } + if (dev->flags) devdbg (dev, "kevent done, flags = 0x%lx", dev->flags);