From 65c0d4e54ae4b81d8c8bb685169e48306656bb5c Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 25 Apr 2008 17:19:25 +0800 Subject: [PATCH] Fix bug - Implement bfin ata interrupt handler to avoid "irq 68 nobody cared" (v2) Return IRQ_HANDLED when bfin ata device is busy. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3513 v1-v2: - fold api breakage fixing patch together. - mark 'static', not 'inline'. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/ata/pata_bf54x.c | 124 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 120 insertions(+), 4 deletions(-) diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index a75de0684c1..9ab89732cf9 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1272,8 +1272,8 @@ static void bfin_freeze(struct ata_port *ap) void bfin_thaw(struct ata_port *ap) { + dev_dbg(ap->dev, "in atapi dma thaw\n"); bfin_check_status(ap); - bfin_irq_clear(ap); bfin_irq_on(ap); } @@ -1339,13 +1339,130 @@ static int bfin_port_start(struct ata_port *ap) return 0; } +static unsigned int bfin_ata_host_intr(struct ata_port *ap, + struct ata_queued_cmd *qc) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + u8 status, host_stat = 0; + + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->print_id, qc->tf.protocol, ap->hsm_task_state); + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto idle_irq; + break; + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", + ap->print_id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto idle_irq; + } + + /* check altstatus */ + status = ap->ops->sff_check_altstatus(ap); + if (status & ATA_BUSY) + goto busy_ata; + + /* check main status, clearing INTRQ */ + status = ap->ops->sff_check_status(ap); + if (unlikely(status & ATA_BUSY)) + goto busy_ata; + + /* ack bmdma irq events */ + ap->ops->sff_irq_clear(ap); + + ata_sff_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATAPI_PROT_DMA)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + +busy_ata: + return 1; /* irq handled */ + +idle_irq: + ap->stats.idle_irq++; + +#ifdef ATA_IRQ_TRAP + if ((ap->stats.idle_irq % 1000) == 0) { + ap->ops->irq_ack(ap, 0); /* debug trap */ + ata_port_printk(ap, KERN_WARNING, "irq trap\n"); + return 1; + } +#endif + return 0; /* irq not handled */ +} + +static irqreturn_t bfin_ata_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + unsigned int i; + unsigned int handled = 0; + unsigned long flags; + + /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ + spin_lock_irqsave(&host->lock, flags); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap; + + ap = host->ports[i]; + if (ap && + !(ap->flags & ATA_FLAG_DISABLED)) { + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) + handled |= bfin_ata_host_intr(ap, qc); + } + } + + spin_unlock_irqrestore(&host->lock, flags); + + return IRQ_RETVAL(handled); +} + + static struct scsi_host_template bfin_sht = { ATA_BASE_SHT(DRV_NAME), .sg_tablesize = SG_NONE, .dma_boundary = ATA_DMA_BOUNDARY, }; -static const struct ata_port_operations bfin_pata_ops = { +static struct ata_port_operations bfin_pata_ops = { .inherits = &ata_sff_port_ops, .set_piomode = bfin_set_piomode, @@ -1370,7 +1487,6 @@ static const struct ata_port_operations bfin_pata_ops = { .thaw = bfin_thaw, .softreset = bfin_softreset, .postreset = bfin_postreset, - .post_internal_cmd = bfin_bmdma_stop, .sff_irq_clear = bfin_irq_clear, .sff_irq_on = bfin_irq_on, @@ -1507,7 +1623,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev) } if (ata_host_activate(host, platform_get_irq(pdev, 0), - ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) { + bfin_ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) { peripheral_free_list(atapi_io_port); dev_err(&pdev->dev, "Fail to attach ATAPI device\n"); return -ENODEV; -- 2.41.0