From 856783b37a958086c83ea44544d366affd0c2c4b Mon Sep 17 00:00:00 2001 From: Yi Li Date: Sat, 9 Feb 2008 02:26:01 +0800 Subject: [PATCH] [Blackfin] arch: add "memmap=nn[KMG]@ss[KMG]" and "memmap=nn[KMG]$ss[KMG]" options to blackfin, based on arch/i386/kernel/e820.c Signed-off-by: Yi Li Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 541 +++++++++++++++++++++++++++-------- arch/blackfin/mm/init.c | 12 +- 2 files changed, 431 insertions(+), 122 deletions(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 289ea9d7fcd..2f156bfc2b2 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -67,6 +68,29 @@ EXPORT_SYMBOL(mtd_size); char __initdata command_line[COMMAND_LINE_SIZE]; +/* boot memmap, for parsing "memmap=" */ +#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ +#define BFIN_MEMMAP_RAM 1 +#define BFIN_MEMMAP_RESERVED 2 +struct bfin_memmap { + int nr_map; + struct bfin_memmap_entry { + unsigned long long addr; /* start of memory segment */ + unsigned long long size; + unsigned long type; + } map[BFIN_MEMMAP_MAX]; +} bfin_memmap __initdata; + +/* for memmap sanitization */ +struct change_member { + struct bfin_memmap_entry *pentry; /* pointer to original entry */ + unsigned long long addr; /* address for this change point */ +}; +static struct change_member change_point_list[2*BFIN_MEMMAP_MAX] __initdata; +static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata; +static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata; +static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata; + void __init bf53x_cache_init(void) { #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) @@ -123,12 +147,224 @@ void __init bf53x_relocate_l1_mem(void) } +/* add_memory_region to memmap */ +static void __init add_memory_region(unsigned long long start, + unsigned long long size, int type) +{ + int i; + + i = bfin_memmap.nr_map; + + if (i == BFIN_MEMMAP_MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + bfin_memmap.map[i].addr = start; + bfin_memmap.map[i].size = size; + bfin_memmap.map[i].type = type; + bfin_memmap.nr_map++; +} + +/* + * Sanitize the boot memmap, removing overlaps. + */ +static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) +{ + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following (1,2,3,4 = memory types) + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in memmap */ + for (i = 0; i < old_nr; i++) + if (map[i].addr + map[i].size < map[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i = 0; i < 2*old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i = 0; i < old_nr; i++) { + if (map[i].size != 0) { + change_point[chgidx]->addr = map[i].addr; + change_point[chgidx++]->pentry = &map[i]; + change_point[chgidx]->addr = map[i].addr + map[i].size; + change_point[chgidx++]->pentry = &map[i]; + } + } + chg_nr = chgidx; /* true number of change-points */ + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i = 1; i < chg_nr; i++) { + /* if > , swap */ + /* or, if current= & last=, swap */ + if ((change_point[i]->addr < change_point[i-1]->addr) || + ((change_point[i]->addr == change_point[i-1]->addr) && + (change_point[i]->addr == change_point[i]->pentry->addr) && + (change_point[i-1]->addr != change_point[i-1]->pentry->addr)) + ) { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing = 1; + } + } + } + + /* create a new memmap, removing overlaps */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_entry = 0; /* index for creating new memmap entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + /* loop through change-points, determining affect on the new memmap */ + for (chgidx = 0; chgidx < chg_nr; chgidx++) { + /* keep track of all overlapping memmap entries */ + if (change_point[chgidx]->addr == change_point[chgidx]->pentry->addr) { + /* add map entry to overlap list (> 1 entry implies an overlap) */ + overlap_list[overlap_entries++] = change_point[chgidx]->pentry; + } else { + /* remove entry from list (order independent, so swap with last) */ + for (i = 0; i < overlap_entries; i++) { + if (overlap_list[i] == change_point[chgidx]->pentry) + overlap_list[i] = overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* if there are overlapping entries, decide which "type" to use */ + /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ + current_type = 0; + for (i = 0; i < overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* continue building up new memmap based on this information */ + if (current_type != last_type) { + if (last_type != 0) { + new_map[new_entry].size = + change_point[chgidx]->addr - last_addr; + /* move forward only if the new size was non-zero */ + if (new_map[new_entry].size != 0) + if (++new_entry >= BFIN_MEMMAP_MAX) + break; /* no more space left for new entries */ + } + if (current_type != 0) { + new_map[new_entry].addr = change_point[chgidx]->addr; + new_map[new_entry].type = current_type; + last_addr = change_point[chgidx]->addr; + } + last_type = current_type; + } + } + new_nr = new_entry; /* retain count for new entries */ + + /* copy new mapping into original location */ + memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry)); + *pnr_map = new_nr; + + return 0; +} + +static void __init print_memory_map(char *who) +{ + int i; + + for (i = 0; i < bfin_memmap.nr_map; i++) { + printk(KERN_DEBUG " %s: %016Lx - %016Lx ", who, + bfin_memmap.map[i].addr, + bfin_memmap.map[i].addr + bfin_memmap.map[i].size); + switch (bfin_memmap.map[i].type) { + case BFIN_MEMMAP_RAM: + printk("(usable)\n"); + break; + case BFIN_MEMMAP_RESERVED: + printk("(reserved)\n"); + break; + default: printk("type %lu\n", bfin_memmap.map[i].type); + break; + } + } +} + +static __init int parse_memmap(char *arg) +{ + unsigned long long start_at, mem_size; + + if (!arg) + return -EINVAL; + + mem_size = memparse(arg, &arg); + if (*arg == '@') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, BFIN_MEMMAP_RAM); + } else if (*arg == '$') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, BFIN_MEMMAP_RESERVED); + } + + return 0; +} + /* * Initial parsing of the command line. Currently, we support: * - Controlling the linux memory size: mem=xxx[KMG] * - Controlling the physical memory size: max_mem=xxx[KMG][$][#] * $ -> reserved memory is dcacheable * # -> reserved memory is icacheable + * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region + * @ from to +, type RAM + * $ from to +, type RESERVED + * */ static __init void parse_cmdline_early(char *cmdline_p) { @@ -136,7 +372,6 @@ static __init void parse_cmdline_early(char *cmdline_p) unsigned int memsize; for (;;) { if (c == ' ') { - if (!memcmp(to, "mem=", 4)) { to += 4; memsize = memparse(to, &to); @@ -162,6 +397,9 @@ static __init void parse_cmdline_early(char *cmdline_p) } else if (!memcmp(to, "earlyprintk=", 12)) { to += 12; setup_early_printk(to); + } else if (!memcmp(to, "memmap=", 7)) { + to += 7; + parse_memmap(to); } } c = *(to++); @@ -170,75 +408,32 @@ static __init void parse_cmdline_early(char *cmdline_p) } } -void __init setup_arch(char **cmdline_p) +/* + * Setup memory defaults from user config. + * The physical memory layout looks like: + * + * [_rambase, _ramstart]: kernel image + * [memory_start, memory_end]: dynamic memory managed by kernel + * [memory_end, _ramend]: reserved memory + * [meory_mtd_start(memory_end), + * memory_mtd_start + mtd_size]: rootfs (if any) + * [_ramend - DMA_UNCACHED_REGION, + * _ramend]: uncached DMA region + * [_ramend, physical_mem_end]: memory not managed by kernel + * + */ +static __init void memory_setup(void) { - int bootmap_size; - unsigned long l1_length, sclk, cclk; -#ifdef CONFIG_MTD_UCLINUX - unsigned long mtd_phys = 0; -#endif - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - -#if defined(CONFIG_CMDLINE_BOOL) - strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); - command_line[sizeof(command_line) - 1] = 0; -#endif - - /* Keep a copy of command line */ - *cmdline_p = &command_line[0]; - memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); - boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; - - /* setup memory defaults from the user config */ - physical_mem_end = 0; - _ramend = CONFIG_MEM_SIZE * 1024 * 1024; - - parse_cmdline_early(&command_line[0]); - - cclk = get_cclk(); - sclk = get_sclk(); - -#if !defined(CONFIG_BFIN_KERNEL_CLOCK) - if (ANOMALY_05000273 && cclk == sclk) - panic("ANOMALY 05000273, SCLK can not be same as CCLK"); -#endif + _rambase = (unsigned long)_stext; + _ramstart = (unsigned long)__bss_stop; -#ifdef BF561_FAMILY - if (ANOMALY_05000266) { - bfin_read_IMDMA_D0_IRQ_STATUS(); - bfin_read_IMDMA_D1_IRQ_STATUS(); + if (DMA_UNCACHED_REGION > (_ramend - _ramstart)) { + console_init(); + panic("DMA region exceeds memory limit: %lu.\n", + _ramend - _ramstart); } -#endif - - printk(KERN_INFO "Hardware Trace "); - if (bfin_read_TBUFCTL() & 0x1 ) - printk("Active "); - else - printk("Off "); - if (bfin_read_TBUFCTL() & 0x2) - printk("and Enabled\n"); - else - printk("and Disabled\n"); - - -#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) - /* we need to initialize the Flashrom device here since we might - * do things with flash early on in the boot - */ - flash_probe(); -#endif - - if (physical_mem_end == 0) - physical_mem_end = _ramend; - - /* by now the stack is part of the init task */ memory_end = _ramend - DMA_UNCACHED_REGION; - _ramstart = (unsigned long)__bss_stop; - _rambase = (unsigned long)_stext; #ifdef CONFIG_MPU /* Round up to multiple of 4MB. */ memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; @@ -319,13 +514,178 @@ void __init setup_arch(char **cmdline_p) #endif #if !defined(CONFIG_MTD_UCLINUX) - memory_end -= SIZE_4K; /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ + /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/ + memory_end -= SIZE_4K; #endif + init_mm.start_code = (unsigned long)_stext; init_mm.end_code = (unsigned long)_etext; init_mm.end_data = (unsigned long)_edata; init_mm.brk = (unsigned long)0; + printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); + printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); + + printk( KERN_INFO "Memory map:\n" + KERN_INFO " text = 0x%p-0x%p\n" + KERN_INFO " rodata = 0x%p-0x%p\n" + KERN_INFO " data = 0x%p-0x%p\n" + KERN_INFO " stack = 0x%p-0x%p\n" + KERN_INFO " init = 0x%p-0x%p\n" + KERN_INFO " bss = 0x%p-0x%p\n" + KERN_INFO " available = 0x%p-0x%p\n" +#ifdef CONFIG_MTD_UCLINUX + KERN_INFO " rootfs = 0x%p-0x%p\n" +#endif +#if DMA_UNCACHED_REGION > 0 + KERN_INFO " DMA Zone = 0x%p-0x%p\n" +#endif + , _stext, _etext, + __start_rodata, __end_rodata, + _sdata, _edata, + (void *)&init_thread_union, + (void *)((int)(&init_thread_union) + 0x2000), + __init_begin, __init_end, + __bss_start, __bss_stop, + (void *)_ramstart, (void *)memory_end +#ifdef CONFIG_MTD_UCLINUX + , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size) +#endif +#if DMA_UNCACHED_REGION > 0 + , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend) +#endif + ); +} + +static __init void setup_bootmem_allocator(void) +{ + int bootmap_size; + int i; + unsigned long min_pfn, max_pfn; + unsigned long curr_pfn, last_pfn, size; + + /* mark memory between memory_start and memory_end usable */ + add_memory_region(memory_start, + memory_end - memory_start, BFIN_MEMMAP_RAM); + /* sanity check for overlap */ + sanitize_memmap(bfin_memmap.map, &bfin_memmap.nr_map); + print_memory_map("boot memmap"); + + min_pfn = PAGE_OFFSET >> PAGE_SHIFT; + max_pfn = memory_end >> PAGE_SHIFT; + + /* + * give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory. + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), + memory_start >> PAGE_SHIFT, /* map goes here */ + min_pfn, max_pfn); + + /* register the memmap regions with the bootmem allocator */ + for (i = 0; i < bfin_memmap.nr_map; i++) { + /* + * Reserve usable memory + */ + if (bfin_memmap.map[i].type != BFIN_MEMMAP_RAM) + continue; + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(bfin_memmap.map[i].addr); + if (curr_pfn >= max_pfn) + continue; + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(bfin_memmap.map[i].addr + + bfin_memmap.map[i].size); + + if (last_pfn > max_pfn) + last_pfn = max_pfn; + + /* + * .. finally, did all the rounding and playing + * around just make the area go away? + */ + if (last_pfn <= curr_pfn) + continue; + + size = last_pfn - curr_pfn; + free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); + } + + /* reserve memory before memory_start, including bootmap */ + reserve_bootmem(PAGE_OFFSET, + memory_start + bootmap_size + PAGE_SIZE - 1 - PAGE_OFFSET, + BOOTMEM_DEFAULT); +} + +void __init setup_arch(char **cmdline_p) +{ + unsigned long l1_length, sclk, cclk; +#ifdef CONFIG_MTD_UCLINUX + unsigned long mtd_phys = 0; +#endif + +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + +#if defined(CONFIG_CMDLINE_BOOL) + strncpy(&command_line[0], CONFIG_CMDLINE, sizeof(command_line)); + command_line[sizeof(command_line) - 1] = 0; +#endif + + /* Keep a copy of command line */ + *cmdline_p = &command_line[0]; + memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE); + boot_command_line[COMMAND_LINE_SIZE - 1] = '\0'; + + /* setup memory defaults from the user config */ + physical_mem_end = 0; + _ramend = CONFIG_MEM_SIZE * 1024 * 1024; + + memset(&bfin_memmap, 0, sizeof(bfin_memmap)); + + parse_cmdline_early(&command_line[0]); + + if (physical_mem_end == 0) + physical_mem_end = _ramend; + + memory_setup(); + + cclk = get_cclk(); + sclk = get_sclk(); + +#if !defined(CONFIG_BFIN_KERNEL_CLOCK) + if (ANOMALY_05000273 && cclk == sclk) + panic("ANOMALY 05000273, SCLK can not be same as CCLK"); +#endif + +#ifdef BF561_FAMILY + if (ANOMALY_05000266) { + bfin_read_IMDMA_D0_IRQ_STATUS(); + bfin_read_IMDMA_D1_IRQ_STATUS(); + } +#endif + printk(KERN_INFO "Hardware Trace "); + if (bfin_read_TBUFCTL() & 0x1) + printk("Active "); + else + printk("Off "); + if (bfin_read_TBUFCTL() & 0x2) + printk("and Enabled\n"); + else + printk("and Disabled\n"); + +#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH) + /* we need to initialize the Flashrom device here since we might + * do things with flash early on in the boot + */ + flash_probe(); +#endif + _bfin_swrst = bfin_read_SWRST(); if (_bfin_swrst & RESET_DOUBLE) @@ -361,55 +721,8 @@ void __init setup_arch(char **cmdline_p) if (ANOMALY_05000273 && (cclk >> 1) <= sclk) printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); - printk(KERN_INFO "Board Memory: %ldMB\n", physical_mem_end >> 20); - printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); - - printk(KERN_INFO "Memory map:\n" - KERN_INFO " text = 0x%p-0x%p\n" - KERN_INFO " rodata = 0x%p-0x%p\n" - KERN_INFO " data = 0x%p-0x%p\n" - KERN_INFO " stack = 0x%p-0x%p\n" - KERN_INFO " init = 0x%p-0x%p\n" - KERN_INFO " bss = 0x%p-0x%p\n" - KERN_INFO " available = 0x%p-0x%p\n" -#ifdef CONFIG_MTD_UCLINUX - KERN_INFO " rootfs = 0x%p-0x%p\n" -#endif -#if DMA_UNCACHED_REGION > 0 - KERN_INFO " DMA Zone = 0x%p-0x%p\n" -#endif - , _stext, _etext, - __start_rodata, __end_rodata, - _sdata, _edata, - (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000), - __init_begin, __init_end, - __bss_start, __bss_stop, - (void *)_ramstart, (void *)memory_end -#ifdef CONFIG_MTD_UCLINUX - , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size) -#endif -#if DMA_UNCACHED_REGION > 0 - , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend) -#endif - ); - - /* - * give all the memory to the bootmap allocator, tell it to put the - * boot mem_map at the start of memory - */ - bootmap_size = init_bootmem_node(NODE_DATA(0), memory_start >> PAGE_SHIFT, /* map goes here */ - PAGE_OFFSET >> PAGE_SHIFT, - memory_end >> PAGE_SHIFT); - /* - * free the usable memory, we have to make sure we do not free - * the bootmem bitmap so we then reserve it after freeing it :-) - */ - free_bootmem(memory_start, memory_end - memory_start); + setup_bootmem_allocator(); - reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT); - /* - * get kmalloc into gear - */ paging_init(); /* check the size of the l1 area */ diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index eb1a12ac9e3..1f516c55bde 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -138,8 +138,7 @@ void __init mem_init(void) start_mem = PAGE_ALIGN(start_mem); max_mapnr = num_physpages = MAP_NR(high_memory); - printk(KERN_INFO "Kernel managed physical pages: %lu\n", - num_physpages); + printk(KERN_DEBUG "Kernel managed physical pages: %lu\n", num_physpages); /* This will put all memory onto the freelists. */ totalram_pages = free_all_bootmem(); @@ -153,8 +152,7 @@ void __init mem_init(void) /* do not count in kernel image between _rambase and _ramstart */ reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT; #if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263) - reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> - PAGE_SHIFT; + reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT; #endif codek = (_etext - _stext) >> 10; @@ -163,11 +161,9 @@ void __init mem_init(void) printk(KERN_INFO "Memory available: %luk/%luk RAM, " - "(%uk init code, %uk kernel code, " - "%uk data, %uk dma, %uk reserved)\n", + "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, - initk, codek, datak, DMA_UNCACHED_REGION >> 10, - (reservedpages << (PAGE_SHIFT-10))); + initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); /* Initialize the blackfin L1 Memory. */ l1sram_init(); -- 2.41.1