From deee7c8164e62690aefefb3503bc4c4672b3e020 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Wed, 29 Oct 2008 20:10:10 +0200 Subject: [PATCH] Staging: w35und: remove timer wrappers This patch removes the OS_TIMER and related wrappers from driver code. The patch also changes the code to use msecs_to_jiffies() for setting up timer->expires. Acked-by: Pavel Machek Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/bssdscpt.h | 2 +- drivers/staging/winbond/linux/common.h | 19 - drivers/staging/winbond/mds_f.h | 6 - drivers/staging/winbond/mds_s.h | 3 +- drivers/staging/winbond/rxisr.c | 29 +- drivers/staging/winbond/scan_s.h | 3 +- drivers/staging/winbond/sme_s.h | 3 +- drivers/staging/winbond/wbhal.c | 778 +++++++++++++------------ drivers/staging/winbond/wbhal_f.h | 2 - drivers/staging/winbond/wbhal_s.h | 2 +- 10 files changed, 408 insertions(+), 439 deletions(-) diff --git a/drivers/staging/winbond/bssdscpt.h b/drivers/staging/winbond/bssdscpt.h index 6f557cbb96d..90b56829c5f 100644 --- a/drivers/staging/winbond/bssdscpt.h +++ b/drivers/staging/winbond/bssdscpt.h @@ -79,7 +79,7 @@ typedef struct BSSDescriptionElement u16 wIndex; // THIS BSS element entry index void* psadapter; // pointer to THIS adapter - OS_TIMER nTimer; // MLME timer + struct timer_list timer; // MLME timer // Authentication u16 wAuthAlgo; // peer MAC MLME use Auth algorithm, default OPEN_AUTH diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h index 42c23a8156c..521b68a9381 100644 --- a/drivers/staging/winbond/linux/common.h +++ b/drivers/staging/winbond/linux/common.h @@ -84,24 +84,5 @@ #define OS_MEMORY_CLEAR( _A, _S ) memset( (u8 *)_A,0,_S) #define OS_MEMORY_COMPARE( _A, _B, _S ) (memcmp(_A,_B,_S)? 0 : 1) // Definition is reverse with Ndis 1: the same 0: different -#define OS_TIMER struct timer_list -#define OS_TIMER_INITIAL( _T, _F, _P ) \ -{ \ - init_timer( _T ); \ - (_T)->function = (void *)_F##_1a; \ - (_T)->data = (unsigned long)_P; \ -} - -// _S : Millisecond -// 20060420 At least 1 large than jiffies -#define OS_TIMER_SET( _T, _S ) \ -{ \ - (_T)->expires = jiffies + ((_S*HZ+999)/1000);\ - add_timer( _T ); \ -} -#define OS_TIMER_CANCEL( _T, _B ) del_timer_sync( _T ) -#define OS_TIMER_GET_SYS_TIME( _T ) (*_T=jiffies) - - #endif // COMMON_DEF diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h index 0733b9fd285..4258b3281d3 100644 --- a/drivers/staging/winbond/mds_f.h +++ b/drivers/staging/winbond/mds_f.h @@ -12,13 +12,7 @@ extern void DataDmp(u8 *pdata, u32 len, u32 offset); void vRxTimerInit(struct wb35_adapter *adapter); void vRxTimerStart(struct wb35_adapter *adapter, int timeout_value); -void RxTimerHandler_1a( struct wb35_adapter *adapter); void vRxTimerStop(struct wb35_adapter *adapter); -void RxTimerHandler( void* SystemSpecific1, - struct wb35_adapter * adapter, - void* SystemSpecific2, - void* SystemSpecific3); - // For Asynchronous indicating. The routine collocates with USB. void Mds_MsduProcess( struct wb35_adapter *adapter, PRXLAYER1 pRxLayer1, u8 SlotIndex); diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h index 283945c5de7..ac1875f6485 100644 --- a/drivers/staging/winbond/mds_s.h +++ b/drivers/staging/winbond/mds_s.h @@ -133,8 +133,7 @@ typedef struct _MDS u8 boCounterMeasureBlock; u8 reserved_4[2]; - //NDIS_MINIPORT_TIMER nTimer; - OS_TIMER nTimer; + struct timer_list timer; u32 TxTsc; // 20060214 u32 TxTsc_2; // 20060214 diff --git a/drivers/staging/winbond/rxisr.c b/drivers/staging/winbond/rxisr.c index 6678660b05d..de49a493512 100644 --- a/drivers/staging/winbond/rxisr.c +++ b/drivers/staging/winbond/rxisr.c @@ -1,30 +1,27 @@ #include "os_common.h" -void vRxTimerInit(struct wb35_adapter * adapter) +static void RxTimerHandler(unsigned long data) { - OS_TIMER_INITIAL(&(adapter->Mds.nTimer), (void*) RxTimerHandler, (void*) adapter); + WARN_ON(1); } -void vRxTimerStart(struct wb35_adapter * adapter, int timeout_value) +void vRxTimerInit(struct wb35_adapter *adapter) { - if (timeout_valueMds.nTimer), timeout_value ); + init_timer(&adapter->Mds.timer); + adapter->Mds.timer.function = RxTimerHandler; + adapter->Mds.timer.data = (unsigned long) adapter; } -void vRxTimerStop(struct wb35_adapter * adapter) +void vRxTimerStart(struct wb35_adapter *adapter, int timeout_value) { - OS_TIMER_CANCEL( &(adapter->Mds.nTimer), 0 ); -} + if (timeout_value < MIN_TIMEOUT_VAL) + timeout_value = MIN_TIMEOUT_VAL; -void RxTimerHandler_1a( struct wb35_adapter * adapter) -{ - RxTimerHandler(NULL, adapter, NULL, NULL); + adapter->Mds.timer.expires = jiffies + msecs_to_jiffies(timeout_value); + add_timer(&adapter->Mds.timer); } -void RxTimerHandler(void* SystemSpecific1, struct wb35_adapter * adapter, - void* SystemSpecific2, void* SystemSpecific3) +void vRxTimerStop(struct wb35_adapter *adapter) { - WARN_ON(1); + del_timer_sync(&adapter->Mds.timer); } diff --git a/drivers/staging/winbond/scan_s.h b/drivers/staging/winbond/scan_s.h index a7489cba1ba..a95239665e3 100644 --- a/drivers/staging/winbond/scan_s.h +++ b/drivers/staging/winbond/scan_s.h @@ -62,8 +62,7 @@ typedef struct _SCAN_PARAMETERS u8 boCCAbusy; // Wb: HWMAC CCA busy status u8 reserved_2; - //NDIS_MINIPORT_TIMER nTimer; - OS_TIMER nTimer; + struct timer_list timer; u32 ScanTimeStamp; //Increase 1 per background scan(1 minute) u32 BssTimeStamp; //Increase 1 per connect status check diff --git a/drivers/staging/winbond/sme_s.h b/drivers/staging/winbond/sme_s.h index de4efa1d05a..33f5d2aa96f 100644 --- a/drivers/staging/winbond/sme_s.h +++ b/drivers/staging/winbond/sme_s.h @@ -106,8 +106,7 @@ typedef struct _SME_PARAMETERS u8 bDesiredPowerSave; // SME timer and timeout value - //NDIS_MINIPORT_TIMER nTimer; - OS_TIMER nTimer; + struct timer_list timer; u8 boInTimerHandler; u8 boAuthRetryActive; diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index 69dcedf3c2d..3edcc479392 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -28,6 +28,292 @@ void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address ) memcpy( pethernet_address, pHwData->PermanentMacAddress, 6 ); } +static void hal_led_control(unsigned long data) +{ + phw_data_t pHwData = (phw_data_t) data; + struct wb35_adapter * adapter = pHwData->adapter; + struct wb35_reg *reg = &pHwData->reg; + u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; + u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 }; + u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 }; + u32 TimeInterval = 500, ltmp, ltmp2; + ltmp=0; + + if( pHwData->SurpriseRemove ) return; + + if( pHwData->LED_control ) { + ltmp2 = pHwData->LED_control & 0xff; + if( ltmp2 == 5 ) // 5 is WPS mode + { + TimeInterval = 100; + ltmp2 = (pHwData->LED_control>>8) & 0xff; + switch( ltmp2 ) + { + case 1: // [0.2 On][0.1 Off]... + pHwData->LED_Blinking %= 3; + ltmp = 0x1010; // Led 1 & 0 Green and Red + if( pHwData->LED_Blinking == 2 ) // Turn off + ltmp = 0; + break; + case 2: // [0.1 On][0.1 Off]... + pHwData->LED_Blinking %= 2; + ltmp = 0x0010; // Led 0 red color + if( pHwData->LED_Blinking ) // Turn off + ltmp = 0; + break; + case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... + pHwData->LED_Blinking %= 15; + ltmp = 0x0010; // Led 0 red color + if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec + ltmp = 0; + break; + case 4: // [300 On][ off ] + ltmp = 0x1000; // Led 1 Green color + if( pHwData->LED_Blinking >= 3000 ) + ltmp = 0; // led maybe on after 300sec * 32bit counter overlap. + break; + } + pHwData->LED_Blinking++; + + reg->U1BC_LEDConfigure = ltmp; + if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB. + { + reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register + reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8; + } + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off + { + if( reg->U1BC_LEDConfigure & 0x1010 ) + { + reg->U1BC_LEDConfigure &= ~0x1010; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + else + { + switch( LEDSet ) + { + case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + //Turn Off LED_0 + if( reg->U1BC_LEDConfigure & 0x10 ) + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + } + else + { + // Turn On LED_0 + if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + break; + + case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure &= ~0xf; + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x1f; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + // 20060901 Gray blinking if in disconnect state and not scanning + ltmp = reg->U1BC_LEDConfigure; + reg->U1BC_LEDConfigure &= ~0x1f; + if( LEDgray2[(pHwData->LED_Blinking%30)] ) + { + reg->U1BC_LEDConfigure |= 0x10; + reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ]; + } + pHwData->LED_Blinking++; + if( reg->U1BC_LEDConfigure != ltmp ) + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + TimeInterval = 100; + } + } + else + { + // Turn On LED_0 + if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) + { + reg->U1BC_LEDConfigure |= 0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off + } + } + break; + + case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing + if( !pHwData->LED_LinkOn ) // Blink only if not Link On + { + // Blinking if scanning is on progress + if( pHwData->LED_Scanning ) + { + if( pHwData->LED_Blinking == 0 ) + { + reg->U1BC_LEDConfigure |= 0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + pHwData->LED_Blinking = 1; + TimeInterval = 300; + } + else + { + reg->U1BC_LEDConfigure &= ~0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off + pHwData->LED_Blinking = 0; + TimeInterval = 300; + } + } + else + { + //Turn Off LED_1 + if( reg->U1BC_LEDConfigure & 0x1000 ) + { + reg->U1BC_LEDConfigure &= ~0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off + } + } + } + else + { + // Is transmitting/receiving ?? + if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) || + (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) ) + { + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) + { + reg->U1BC_LEDConfigure |= 0x3000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + } + + // Update variable + pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter ); + pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter ); + TimeInterval = 200; + } + else + { + // Turn On LED_1 and blinking if transmitting/receiving + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 ) + { + reg->U1BC_LEDConfigure &= ~0x3000; + reg->U1BC_LEDConfigure |= 0x1000; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On + } + } + } + break; + + default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active + if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) + { + reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + + if( pHwData->LED_Blinking ) + { + // Gray blinking + reg->U1BC_LEDConfigure &= ~0x0f; + reg->U1BC_LEDConfigure |= 0x10; + reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ]; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + + pHwData->LED_Blinking += 2; + if( pHwData->LED_Blinking < 40 ) + TimeInterval = 100; + else + { + pHwData->LED_Blinking = 0; // Stop blinking + reg->U1BC_LEDConfigure &= ~0x0f; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + break; + } + + if( pHwData->LED_LinkOn ) + { + if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0 + { + //Try to turn ON LED_0 after gray blinking + reg->U1BC_LEDConfigure |= 0x10; + pHwData->LED_Blinking = 1; //Start blinking + TimeInterval = 50; + } + } + else + { + if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0 + { + reg->U1BC_LEDConfigure &= ~0x10; + Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + } + } + break; + } + + //20060828.1 Active send null packet to avoid AP disconnect + if( pHwData->LED_LinkOn ) + { + pHwData->NullPacketCount += TimeInterval; + if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT ) + { + pHwData->NullPacketCount = 0; + } + } + } + + pHwData->time_count += TimeInterval; + Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add + pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval); + add_timer(&pHwData->LEDTimer); +} + + u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter) { u16 SoftwareSet; @@ -44,8 +330,11 @@ u8 hal_init_hardware(phw_data_t pHwData, struct wb35_adapter * adapter) pHwData->InitialResource = 3; if (Wb35Rx_initial(pHwData)) { pHwData->InitialResource = 4; - OS_TIMER_INITIAL( &pHwData->LEDTimer, hal_led_control, pHwData ); - OS_TIMER_SET( &pHwData->LEDTimer, 1000 ); // 20060623 + init_timer(&pHwData->LEDTimer); + pHwData->LEDTimer.function = hal_led_control; + pHwData->LEDTimer.data = (unsigned long) pHwData; + pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(1000); + add_timer(&pHwData->LEDTimer); // // For restrict to vendor's hardware @@ -77,7 +366,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) switch( pHwData->InitialResource ) { case 4: - case 3: OS_TIMER_CANCEL( &pHwData->LEDTimer, &cancel ); + case 3: del_timer_sync(&pHwData->LEDTimer); msleep(100); // Wait for Timer DPC exit 940623.2 Wb35Rx_destroy( pHwData ); // Release the Rx case 2: Wb35Tx_destroy( pHwData ); // Release the Tx @@ -322,403 +611,115 @@ void hal_stop( phw_data_t pHwData ) pHwData->Wb35Rx.rx_halt = 1; Wb35Rx_stop( pHwData ); - pHwData->Wb35Tx.tx_halt = 1; - Wb35Tx_stop( pHwData ); - - reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off - Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl ); -} - -unsigned char hal_idle(phw_data_t pHwData) -{ - struct wb35_reg *reg = &pHwData->reg; - PWBUSB pWbUsb = &pHwData->WbUsb; - - if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) ) - return false; - - return true; -} -//--------------------------------------------------------------------------------------------------- -void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min ) -{ - struct wb35_reg *reg = &pHwData->reg; - - if( pHwData->SurpriseRemove ) return; - - pHwData->cwmin = cwin_min; - reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14 - reg->M2C_MacControl |= (pHwData->cwmin<<10); - Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl ); -} - -s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ) -{ - struct wb35_reg *reg = &pHwData->reg; - R01_DESCRIPTOR r01; - s32 ltmp = 0, tmp; - u8 i; - - if( pHwData->SurpriseRemove ) return -200; - if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion - Count = MAX_ACC_RSSI_COUNT; - - // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) - // C1 = -195, C2 = 0.66 = 85/128 - for (i=0; iLNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - } - ltmp /= Count; - if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; - if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this - - //if( ltmp < -200 ) ltmp = -200; - if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC - - return ltmp; -} -//---------------------------------------------------------------------------------------------------- -s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count ) -{ - struct wb35_reg *reg = &pHwData->reg; - R01_DESCRIPTOR r01; - s32 ltmp = 0, tmp; - u8 i, j; - struct wb35_adapter * adapter = pHwData->adapter; -// u32 *HalRssiArry = psBSS(idx)->HalRssi; - - if( pHwData->SurpriseRemove ) return -200; - if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion - Count = MAX_ACC_RSSI_COUNT; - - // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) - // C1 = -195, C2 = 0.66 = 85/128 -#if 0 - for (i=0; iLNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - } -#else - if (psBSS(idx)->HalRssiIndex == 0) - psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT; - j = (u8)psBSS(idx)->HalRssiIndex-1; - - for (i=0; iHalRssi[j]; - tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; - ltmp += tmp; - if (j == 0) - { - j = MAX_ACC_RSSI_COUNT; - } - j--; - } -#endif - ltmp /= Count; - if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; - if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this - - //if( ltmp < -200 ) ltmp = -200; - if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC - - return ltmp; -} - -//--------------------------------------------------------------------------- -void hal_led_control_1a( phw_data_t pHwData ) -{ - hal_led_control( NULL, pHwData, NULL, NULL ); -} - -void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 ) -{ - struct wb35_adapter * adapter = pHwData->adapter; - struct wb35_reg *reg = &pHwData->reg; - u32 LEDSet = (pHwData->SoftwareSet & HAL_LED_SET_MASK) >> HAL_LED_SET_SHIFT; - u8 LEDgray[20] = { 0,3,4,6,8,10,11,12,13,14,15,14,13,12,11,10,8,6,4,2 }; - u8 LEDgray2[30] = { 7,8,9,10,11,12,13,14,15,0,0,0,0,0,0,0,0,0,0,0,0,0,15,14,13,12,11,10,9,8 }; - u32 TimeInterval = 500, ltmp, ltmp2; - ltmp=0; - - if( pHwData->SurpriseRemove ) return; - - if( pHwData->LED_control ) { - ltmp2 = pHwData->LED_control & 0xff; - if( ltmp2 == 5 ) // 5 is WPS mode - { - TimeInterval = 100; - ltmp2 = (pHwData->LED_control>>8) & 0xff; - switch( ltmp2 ) - { - case 1: // [0.2 On][0.1 Off]... - pHwData->LED_Blinking %= 3; - ltmp = 0x1010; // Led 1 & 0 Green and Red - if( pHwData->LED_Blinking == 2 ) // Turn off - ltmp = 0; - break; - case 2: // [0.1 On][0.1 Off]... - pHwData->LED_Blinking %= 2; - ltmp = 0x0010; // Led 0 red color - if( pHwData->LED_Blinking ) // Turn off - ltmp = 0; - break; - case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... - pHwData->LED_Blinking %= 15; - ltmp = 0x0010; // Led 0 red color - if( (pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking%2) ) // Turn off 0.6 sec - ltmp = 0; - break; - case 4: // [300 On][ off ] - ltmp = 0x1000; // Led 1 Green color - if( pHwData->LED_Blinking >= 3000 ) - ltmp = 0; // led maybe on after 300sec * 32bit counter overlap. - break; - } - pHwData->LED_Blinking++; - - reg->U1BC_LEDConfigure = ltmp; - if( LEDSet != 7 ) // Only 111 mode has 2 LEDs on PCB. - { - reg->U1BC_LEDConfigure |= (ltmp &0xff)<<8; // Copy LED result to each LED control register - reg->U1BC_LEDConfigure |= (ltmp &0xff00)>>8; - } - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - else if( pHwData->CurrentRadioSw || pHwData->CurrentRadioHw ) // If radio off - { - if( reg->U1BC_LEDConfigure & 0x1010 ) - { - reg->U1BC_LEDConfigure &= ~0x1010; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - else - { - switch( LEDSet ) - { - case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - //Turn Off LED_0 - if( reg->U1BC_LEDConfigure & 0x10 ) - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - } - else - { - // Turn On LED_0 - if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - break; - - case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure &= ~0xf; - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x1f; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - // 20060901 Gray blinking if in disconnect state and not scanning - ltmp = reg->U1BC_LEDConfigure; - reg->U1BC_LEDConfigure &= ~0x1f; - if( LEDgray2[(pHwData->LED_Blinking%30)] ) - { - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= LEDgray2[ (pHwData->LED_Blinking%30) ]; - } - pHwData->LED_Blinking++; - if( reg->U1BC_LEDConfigure != ltmp ) - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - TimeInterval = 100; - } - } - else - { - // Turn On LED_0 - if( (reg->U1BC_LEDConfigure & 0x10) == 0 ) - { - reg->U1BC_LEDConfigure |= 0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_0 Off - } - } - break; + pHwData->Wb35Tx.tx_halt = 1; + Wb35Tx_stop( pHwData ); - case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing - if( !pHwData->LED_LinkOn ) // Blink only if not Link On - { - // Blinking if scanning is on progress - if( pHwData->LED_Scanning ) - { - if( pHwData->LED_Blinking == 0 ) - { - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - pHwData->LED_Blinking = 1; - TimeInterval = 300; - } - else - { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off - pHwData->LED_Blinking = 0; - TimeInterval = 300; - } - } - else - { - //Turn Off LED_1 - if( reg->U1BC_LEDConfigure & 0x1000 ) - { - reg->U1BC_LEDConfigure &= ~0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 Off - } - } - } - else - { - // Is transmitting/receiving ?? - if( (OS_CURRENT_RX_BYTE( adapter ) != pHwData->RxByteCountLast ) || - (OS_CURRENT_TX_BYTE( adapter ) != pHwData->TxByteCountLast ) ) - { - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) - { - reg->U1BC_LEDConfigure |= 0x3000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - } + reg->D00_DmaControl &= ~0xc0000000;//Tx Off, Rx Off + Wb35Reg_Write( pHwData, 0x0400, reg->D00_DmaControl ); +} - // Update variable - pHwData->RxByteCountLast = OS_CURRENT_RX_BYTE( adapter ); - pHwData->TxByteCountLast = OS_CURRENT_TX_BYTE( adapter ); - TimeInterval = 200; - } - else - { - // Turn On LED_1 and blinking if transmitting/receiving - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x1000 ) - { - reg->U1BC_LEDConfigure &= ~0x3000; - reg->U1BC_LEDConfigure |= 0x1000; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); // LED_1 On - } - } - } - break; +unsigned char hal_idle(phw_data_t pHwData) +{ + struct wb35_reg *reg = &pHwData->reg; + PWBUSB pWbUsb = &pHwData->WbUsb; - default: // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active - if( (reg->U1BC_LEDConfigure & 0x3000) != 0x3000 ) - { - reg->U1BC_LEDConfigure |= 0x3000;// LED_1 is always on and event enable - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } + if( !pHwData->SurpriseRemove && ( pWbUsb->DetectCount || reg->EP0vm_state!=VM_STOP ) ) + return false; - if( pHwData->LED_Blinking ) - { - // Gray blinking - reg->U1BC_LEDConfigure &= ~0x0f; - reg->U1BC_LEDConfigure |= 0x10; - reg->U1BC_LEDConfigure |= LEDgray[ (pHwData->LED_Blinking-1)%20 ]; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); + return true; +} +//--------------------------------------------------------------------------------------------------- +void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min ) +{ + struct wb35_reg *reg = &pHwData->reg; - pHwData->LED_Blinking += 2; - if( pHwData->LED_Blinking < 40 ) - TimeInterval = 100; - else - { - pHwData->LED_Blinking = 0; // Stop blinking - reg->U1BC_LEDConfigure &= ~0x0f; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - break; - } + if( pHwData->SurpriseRemove ) return; - if( pHwData->LED_LinkOn ) - { - if( !(reg->U1BC_LEDConfigure & 0x10) ) // Check the LED_0 - { - //Try to turn ON LED_0 after gray blinking - reg->U1BC_LEDConfigure |= 0x10; - pHwData->LED_Blinking = 1; //Start blinking - TimeInterval = 50; - } - } - else - { - if( reg->U1BC_LEDConfigure & 0x10 ) // Check the LED_0 - { - reg->U1BC_LEDConfigure &= ~0x10; - Wb35Reg_Write( pHwData, 0x03bc, reg->U1BC_LEDConfigure ); - } - } - break; - } + pHwData->cwmin = cwin_min; + reg->M2C_MacControl &= ~0x7c00; //bit 10 ~ 14 + reg->M2C_MacControl |= (pHwData->cwmin<<10); + Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl ); +} - //20060828.1 Active send null packet to avoid AP disconnect - if( pHwData->LED_LinkOn ) +s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ) +{ + struct wb35_reg *reg = &pHwData->reg; + R01_DESCRIPTOR r01; + s32 ltmp = 0, tmp; + u8 i; + + if( pHwData->SurpriseRemove ) return -200; + if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion + Count = MAX_ACC_RSSI_COUNT; + + // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) + // C1 = -195, C2 = 0.66 = 85/128 + for (i=0; iLNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; + ltmp += tmp; + } + ltmp /= Count; + if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; + if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this + + //if( ltmp < -200 ) ltmp = -200; + if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC + + return ltmp; +} +//---------------------------------------------------------------------------------------------------- +s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count ) +{ + struct wb35_reg *reg = &pHwData->reg; + R01_DESCRIPTOR r01; + s32 ltmp = 0, tmp; + u8 i, j; + struct wb35_adapter * adapter = pHwData->adapter; +// u32 *HalRssiArry = psBSS(idx)->HalRssi; + + if( pHwData->SurpriseRemove ) return -200; + if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion + Count = MAX_ACC_RSSI_COUNT; + + // RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0])) + // C1 = -195, C2 = 0.66 = 85/128 +#if 0 + for (i=0; iLNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; + ltmp += tmp; + } +#else + if (psBSS(idx)->HalRssiIndex == 0) + psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT; + j = (u8)psBSS(idx)->HalRssiIndex-1; + + for (i=0; iHalRssi[j]; + tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195; + ltmp += tmp; + if (j == 0) { - pHwData->NullPacketCount += TimeInterval; - if( pHwData->NullPacketCount >= DEFAULT_NULL_PACKET_COUNT ) - { - pHwData->NullPacketCount = 0; - } + j = MAX_ACC_RSSI_COUNT; } + j--; } +#endif + ltmp /= Count; + if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10; + if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this - pHwData->time_count += TimeInterval; - Wb35Tx_CurrentTime( pHwData, pHwData->time_count ); // 20060928 add - OS_TIMER_SET( &pHwData->LEDTimer, TimeInterval ); // 20060623.1 + //if( ltmp < -200 ) ltmp = -200; + if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC + + return ltmp; } +//--------------------------------------------------------------------------- void hal_set_phy_type( phw_data_t pHwData, u8 PhyType ) { @@ -867,7 +868,8 @@ unsigned char hal_set_LED(phw_data_t pHwData, u32 Mode) // 20061108 for WPS led { pHwData->LED_Blinking = 0; pHwData->LED_control = Mode; - OS_TIMER_SET( &pHwData->LEDTimer, 10 ); // 20060623 + pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(10); + add_timer(&pHwData->LEDTimer); return true; } diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h index 239c301b029..7e6ebf2717b 100644 --- a/drivers/staging/winbond/wbhal_f.h +++ b/drivers/staging/winbond/wbhal_f.h @@ -68,8 +68,6 @@ s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ); s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count ); void hal_set_connect_info( phw_data_t pHwData, unsigned char boConnect ); u8 hal_get_est_sq3( phw_data_t pHwData, u8 Count ); -void hal_led_control_1a( phw_data_t pHwData ); -void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 ); void hal_set_rf_power( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify void hal_reset_counter( phw_data_t pHwData ); void hal_set_radio_mode( phw_data_t pHwData, unsigned char boValue); diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h index 47f99e1afc7..2d3adfc3fcb 100644 --- a/drivers/staging/winbond/wbhal_s.h +++ b/drivers/staging/winbond/wbhal_s.h @@ -510,7 +510,7 @@ typedef struct _HW_DATA_T WB35TX Wb35Tx; // Need Wb35Tx.h WB35RX Wb35Rx; // Need Wb35Rx.h - OS_TIMER LEDTimer;// For LED + struct timer_list LEDTimer;// For LED u32 LEDpoint;// For LED -- 2.41.0