arch/arm/mach-omap1/board-h2.c

   1 /*
   2  * linux/arch/arm/mach-omap1/board-h2.c
   3  *
   4  * Board specific inits for OMAP-1610 H2
   5  *
   6  * Copyright (C) 2001 RidgeRun, Inc.
   7  * Author: Greg Lonnon <glonnon@ridgerun.com>
   8  *
   9  * Copyright (C) 2002 MontaVista Software, Inc.
  10  *
  11  * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
  12  * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
  13  *
  14  * H2 specific changes and cleanup
  15  * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
  16  *
  17  * This program is free software; you can redistribute it and/or modify
  18  * it under the terms of the GNU General Public License version 2 as
  19  * published by the Free Software Foundation.
  20  */
  21
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/platform_device.h>
  25 #include <linux/delay.h>
  26 #include <linux/mtd/mtd.h>
  27 #include <linux/mtd/nand.h>
  28 #include <linux/mtd/partitions.h>
  29 #include <linux/input.h>
  30 #include <linux/workqueue.h>
  31 #include <linux/spi/spi.h>
  32 #include <linux/spi/tsc2101.h>
  33 #include <linux/clk.h>
  34
  35 #include <asm/hardware.h>
  36 #include <asm/mach-types.h>
  37 #include <asm/mach/arch.h>
  38 #include <asm/mach/flash.h>
  39 #include <asm/mach/map.h>
  40
  41 #include <asm/arch/gpio.h>
  42 #include <asm/arch/mux.h>
  43 #include <asm/arch/tc.h>
  44 #include <asm/arch/irda.h>
  45 #include <asm/arch/usb.h>
  46 #include <asm/arch/keypad.h>
  47 #include <asm/arch/common.h>
  48 #include <asm/arch/mcbsp.h>
  49 #include <asm/arch/omap-alsa.h>
  50
  51 extern int omap_gpio_init(void);
  52
  53 static int h2_keymap[] = {
  54         KEY(0, 0, KEY_LEFT),
  55         KEY(0, 1, KEY_RIGHT),
  56         KEY(0, 2, KEY_3),
  57         KEY(0, 3, KEY_F10),
  58         KEY(0, 4, KEY_F5),
  59         KEY(0, 5, KEY_9),
  60         KEY(1, 0, KEY_DOWN),
  61         KEY(1, 1, KEY_UP),
  62         KEY(1, 2, KEY_2),
  63         KEY(1, 3, KEY_F9),
  64         KEY(1, 4, KEY_F7),
  65         KEY(1, 5, KEY_0),
  66         KEY(2, 0, KEY_ENTER),
  67         KEY(2, 1, KEY_6),
  68         KEY(2, 2, KEY_1),
  69         KEY(2, 3, KEY_F2),
  70         KEY(2, 4, KEY_F6),
  71         KEY(2, 5, KEY_HOME),
  72         KEY(3, 0, KEY_8),
  73         KEY(3, 1, KEY_5),
  74         KEY(3, 2, KEY_F12),
  75         KEY(3, 3, KEY_F3),
  76         KEY(3, 4, KEY_F8),
  77         KEY(3, 5, KEY_END),
  78         KEY(4, 0, KEY_7),
  79         KEY(4, 1, KEY_4),
  80         KEY(4, 2, KEY_F11),
  81         KEY(4, 3, KEY_F1),
  82         KEY(4, 4, KEY_F4),
  83         KEY(4, 5, KEY_ESC),
  84         KEY(5, 0, KEY_F13),
  85         KEY(5, 1, KEY_F14),
  86         KEY(5, 2, KEY_F15),
  87         KEY(5, 3, KEY_F16),
  88         KEY(5, 4, KEY_SLEEP),
  89         0
  90 };
  91
  92 static struct mtd_partition h2_nor_partitions[] = {
  93         /* bootloader (U-Boot, etc) in first sector */
  94         {
  95               .name             = "bootloader",
  96               .offset           = 0,
  97               .size             = SZ_128K,
  98               .mask_flags       = MTD_WRITEABLE, /* force read-only */
  99         },
 100         /* bootloader params in the next sector */
 101         {
 102               .name             = "params",
 103               .offset           = MTDPART_OFS_APPEND,
 104               .size             = SZ_128K,
 105               .mask_flags       = 0,
 106         },
 107         /* kernel */
 108         {
 109               .name             = "kernel",
 110               .offset           = MTDPART_OFS_APPEND,
 111               .size             = SZ_2M,
 112               .mask_flags       = 0
 113         },
 114         /* file system */
 115         {
 116               .name             = "filesystem",
 117               .offset           = MTDPART_OFS_APPEND,
 118               .size             = MTDPART_SIZ_FULL,
 119               .mask_flags       = 0
 120         }
 121 };
 122
 123 static struct flash_platform_data h2_nor_data = {
 124         .map_name       = "cfi_probe",
 125         .width          = 2,
 126         .parts          = h2_nor_partitions,
 127         .nr_parts       = ARRAY_SIZE(h2_nor_partitions),
 128 };
 129
 130 static struct resource h2_nor_resource = {
 131         /* This is on CS3, wherever it's mapped */
 132         .flags          = IORESOURCE_MEM,
 133 };
 134
 135 static struct platform_device h2_nor_device = {
 136         .name           = "omapflash",
 137         .id             = 0,
 138         .dev            = {
 139                 .platform_data  = &h2_nor_data,
 140         },
 141         .num_resources  = 1,
 142         .resource       = &h2_nor_resource,
 143 };
 144
 145 static struct mtd_partition h2_nand_partitions[] = {
 146 #if 0
 147         /* REVISIT:  enable these partitions if you make NAND BOOT
 148          * work on your H2 (rev C or newer); published versions of
 149          * x-load only support P2 and H3.
 150          */
 151         {
 152                 .name           = "xloader",
 153                 .offset         = 0,
 154                 .size           = 64 * 1024,
 155                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 156         },
 157         {
 158                 .name           = "bootloader",
 159                 .offset         = MTDPART_OFS_APPEND,
 160                 .size           = 256 * 1024,
 161                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 162         },
 163         {
 164                 .name           = "params",
 165                 .offset         = MTDPART_OFS_APPEND,
 166                 .size           = 192 * 1024,
 167         },
 168         {
 169                 .name           = "kernel",
 170                 .offset         = MTDPART_OFS_APPEND,
 171                 .size           = 2 * SZ_1M,
 172         },
 173 #endif
 174         {
 175                 .name           = "filesystem",
 176                 .size           = MTDPART_SIZ_FULL,
 177                 .offset         = MTDPART_OFS_APPEND,
 178         },
 179 };
 180
 181 /* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
 182 static struct nand_platform_data h2_nand_data = {
 183         .options        = NAND_SAMSUNG_LP_OPTIONS,
 184         .parts          = h2_nand_partitions,
 185         .nr_parts       = ARRAY_SIZE(h2_nand_partitions),
 186 };
 187
 188 static struct resource h2_nand_resource = {
 189         .flags          = IORESOURCE_MEM,
 190 };
 191
 192 static struct platform_device h2_nand_device = {
 193         .name           = "omapnand",
 194         .id             = 0,
 195         .dev            = {
 196                 .platform_data  = &h2_nand_data,
 197         },
 198         .num_resources  = 1,
 199         .resource       = &h2_nand_resource,
 200 };
 201
 202 static struct resource h2_smc91x_resources[] = {
 203         [0] = {
 204                 .start  = OMAP1610_ETHR_START,          /* Physical */
 205                 .end    = OMAP1610_ETHR_START + 0xf,
 206                 .flags  = IORESOURCE_MEM,
 207         },
 208         [1] = {
 209                 .start  = OMAP_GPIO_IRQ(0),
 210                 .end    = OMAP_GPIO_IRQ(0),
 211                 .flags  = IORESOURCE_IRQ,
 212         },
 213 };
 214
 215 static struct platform_device h2_smc91x_device = {
 216         .name           = "smc91x",
 217         .id             = 0,
 218         .num_resources  = ARRAY_SIZE(h2_smc91x_resources),
 219         .resource       = h2_smc91x_resources,
 220 };
 221
 222 static struct resource h2_kp_resources[] = {
 223         [0] = {
 224                 .start  = INT_KEYBOARD,
 225                 .end    = INT_KEYBOARD,
 226                 .flags  = IORESOURCE_IRQ,
 227         },
 228 };
 229
 230 static struct omap_kp_platform_data h2_kp_data = {
 231         .rows           = 8,
 232         .cols           = 8,
 233         .keymap         = h2_keymap,
 234         .keymapsize     = ARRAY_SIZE(h2_keymap),
 235         .rep            = 1,
 236         .delay          = 9,
 237         .dbounce        = 1,
 238 };
 239
 240 static struct platform_device h2_kp_device = {
 241         .name           = "omap-keypad",
 242         .id             = -1,
 243         .dev            = {
 244                 .platform_data = &h2_kp_data,
 245         },
 246         .num_resources  = ARRAY_SIZE(h2_kp_resources),
 247         .resource       = h2_kp_resources,
 248 };
 249
 250 #define H2_IRDA_FIRSEL_GPIO_PIN 17
 251
 252 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 253 static int h2_transceiver_mode(struct device *dev, int state)
 254 {
 255         if (state & IR_SIRMODE)
 256                 omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
 257         else    /* MIR/FIR */
 258                 omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
 259
 260         return 0;
 261 }
 262 #endif
 263
 264 static struct omap_irda_config h2_irda_data = {
 265         .transceiver_cap        = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
 266         .rx_channel             = OMAP_DMA_UART3_RX,
 267         .tx_channel             = OMAP_DMA_UART3_TX,
 268         .dest_start             = UART3_THR,
 269         .src_start              = UART3_RHR,
 270         .tx_trigger             = 0,
 271         .rx_trigger             = 0,
 272 };
 273
 274 static struct resource h2_irda_resources[] = {
 275         [0] = {
 276                 .start  = INT_UART3,
 277                 .end    = INT_UART3,
 278                 .flags  = IORESOURCE_IRQ,
 279         },
 280 };
 281
 282 static u64 irda_dmamask = 0xffffffff;
 283
 284 static struct platform_device h2_irda_device = {
 285         .name           = "omapirda",
 286         .id             = 0,
 287         .dev            = {
 288                 .platform_data  = &h2_irda_data,
 289                 .dma_mask       = &irda_dmamask,
 290         },
 291         .num_resources  = ARRAY_SIZE(h2_irda_resources),
 292         .resource       = h2_irda_resources,
 293 };
 294
 295 static struct platform_device h2_lcd_device = {
 296         .name           = "lcd_h2",
 297         .id             = -1,
 298 };
 299
 300 struct {
 301         struct clk      *mclk;
 302         int             initialized;
 303 } h2_tsc2101;
 304
 305 #define TSC2101_MUX_MCLK_ON     R10_1610_MCLK_ON
 306 #define TSC2101_MUX_MCLK_OFF    R10_1610_MCLK_OFF
 307
 308 static int h2_tsc2101_init(struct spi_device *spi)
 309 {
 310         int r;
 311
 312         if (h2_tsc2101.initialized) {
 313                 printk(KERN_ERR "tsc2101: already initialized\n");
 314                 return -ENODEV;
 315         }
 316
 317         /* Get the MCLK */
 318         h2_tsc2101.mclk = clk_get(&spi->dev, "mclk");
 319         if (IS_ERR(h2_tsc2101.mclk)) {
 320                 dev_err(&spi->dev, "unable to get the clock MCLK\n");
 321                 return PTR_ERR(h2_tsc2101.mclk);
 322         }
 323         if ((r = clk_set_rate(h2_tsc2101.mclk, 12000000)) < 0) {
 324                 dev_err(&spi->dev, "unable to set rate to the MCLK\n");
 325                 goto err;
 326         }
 327
 328         omap_cfg_reg(TSC2101_MUX_MCLK_OFF);
 329         omap_cfg_reg(N15_1610_UWIRE_CS1);
 330
 331         return 0;
 332 err:
 333         clk_put(h2_tsc2101.mclk);
 334         return r;
 335 }
 336
 337 static void h2_tsc2101_cleanup(struct spi_device *spi)
 338 {
 339         clk_put(h2_tsc2101.mclk);
 340         omap_cfg_reg(TSC2101_MUX_MCLK_OFF);
 341 }
 342
 343 static void h2_tsc2101_enable_mclk(struct spi_device *spi)
 344 {
 345         omap_cfg_reg(TSC2101_MUX_MCLK_ON);
 346         clk_enable(h2_tsc2101.mclk);
 347 }
 348
 349 static void h2_tsc2101_disable_mclk(struct spi_device *spi)
 350 {
 351         clk_disable(h2_tsc2101.mclk);
 352         omap_cfg_reg(R10_1610_MCLK_OFF);
 353 }
 354
 355 static struct tsc2101_platform_data h2_tsc2101_platform_data = {
 356         .init           = h2_tsc2101_init,
 357         .cleanup        = h2_tsc2101_cleanup,
 358         .enable_mclk    = h2_tsc2101_enable_mclk,
 359         .disable_mclk   = h2_tsc2101_disable_mclk,
 360 };
 361
 362 static struct spi_board_info h2_spi_board_info[] __initdata = {
 363         [0] = {
 364                 .modalias       = "tsc2101",
 365                 .bus_num        = 2,
 366                 .chip_select    = 1,
 367                 .max_speed_hz   = 16000000,
 368                 .platform_data  = &h2_tsc2101_platform_data,
 369         },
 370 };
 371
 372 static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 373         .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
 374         .spcr1 = RINTM(3) | RRST,
 375         .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
 376                 RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
 377         .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
 378         .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
 379                 XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
 380         .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
 381         .srgr1 = FWID(15),
 382         .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
 383
 384         .pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
 385         //.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
 386 };
 387
 388 static struct omap_alsa_codec_config alsa_config = {
 389         .name                   = "H2 TSC2101",
 390         .mcbsp_regs_alsa        = &mcbsp_regs,
 391         .codec_configure_dev    = NULL, // tsc2101_configure,
 392         .codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
 393         .codec_clock_setup      = NULL, // tsc2101_clock_setup,
 394         .codec_clock_on         = NULL, // tsc2101_clock_on,
 395         .codec_clock_off        = NULL, // tsc2101_clock_off,
 396         .get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
 397 };
 398
 399 static struct platform_device h2_mcbsp1_device = {
 400         .name   = "omap_alsa_mcbsp",
 401         .id     = 1,
 402         .dev = {
 403                 .platform_data  = &alsa_config,
 404         },
 405 };
 406
 407 static struct platform_device *h2_devices[] __initdata = {
 408         &h2_nor_device,
 409         &h2_nand_device,
 410         &h2_smc91x_device,
 411         &h2_irda_device,
 412         &h2_kp_device,
 413         &h2_lcd_device,
 414         &h2_mcbsp1_device,
 415 };
 416
 417 static void __init h2_init_smc91x(void)
 418 {
 419         if ((omap_request_gpio(0)) < 0) {
 420                 printk("Error requesting gpio 0 for smc91x irq\n");
 421                 return;
 422         }
 423 }
 424
 425 static void __init h2_init_irq(void)
 426 {
 427         omap1_init_common_hw();
 428         omap_init_irq();
 429         omap_gpio_init();
 430         h2_init_smc91x();
 431 }
 432
 433 static struct omap_usb_config h2_usb_config __initdata = {
 434         /* usb1 has a Mini-AB port and external isp1301 transceiver */
 435         .otg            = 2,
 436
 437 #ifdef  CONFIG_USB_GADGET_OMAP
 438         .hmc_mode       = 19,   // 0:host(off) 1:dev|otg 2:disabled
 439         // .hmc_mode    = 21,   // 0:host(off) 1:dev(loopback) 2:host(loopback)
 440 #elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 441         /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 442         .hmc_mode       = 20,   // 1:dev|otg(off) 1:host 2:disabled
 443 #endif
 444
 445         .pins[1]        = 3,
 446 };
 447
 448 static struct omap_mmc_config h2_mmc_config __initdata = {
 449         .mmc [0] = {
 450                 .enabled        = 1,
 451                 .wire4          = 1,
 452                 .wp_pin         = OMAP_MPUIO(3),
 453                 .power_pin      = -1,   /* tps65010 gpio3 */
 454                 .switch_pin     = OMAP_MPUIO(1),
 455         },
 456 };
 457
 458 static struct omap_uart_config h2_uart_config __initdata = {
 459         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
 460 };
 461
 462 static struct omap_lcd_config h2_lcd_config __initdata = {
 463         .ctrl_name      = "internal",
 464 };
 465
 466 static struct omap_board_config_kernel h2_config[] = {
 467         { OMAP_TAG_USB,           &h2_usb_config },
 468         { OMAP_TAG_MMC,           &h2_mmc_config },
 469         { OMAP_TAG_UART,        &h2_uart_config },
 470         { OMAP_TAG_LCD,         &h2_lcd_config },
 471 };
 472
 473 #define H2_NAND_RB_GPIO_PIN     62
 474
 475 static int h2_nand_dev_ready(struct nand_platform_data *data)
 476 {
 477         return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN);
 478 }
 479
 480 static void __init h2_init(void)
 481 {
 482         /* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 483          * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 484          * notice whether a NAND chip is enabled at probe time.
 485          *
 486          * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
 487          * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
 488          * detecting that in code here, to avoid probing every possible flash
 489          * configuration...
 490          */
 491         h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
 492         h2_nor_resource.end += SZ_32M - 1;
 493
 494         h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
 495         h2_nand_resource.end += SZ_4K - 1;
 496         if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN)))
 497                 h2_nand_data.dev_ready = h2_nand_dev_ready;
 498
 499         omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 500         omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 501
 502         /* MMC:  card detect and WP */
 503         // omap_cfg_reg(U19_ARMIO1);            /* CD */
 504         omap_cfg_reg(BALLOUT_V8_ARMIO3);        /* WP */
 505
 506         /* Irda */
 507 #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
 508         omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
 509         if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
 510                 omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
 511                 h2_irda_data.transceiver_mode = h2_transceiver_mode;
 512         }
 513 #endif
 514
 515         platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 516         spi_register_board_info(h2_spi_board_info,
 517                                 ARRAY_SIZE(h2_spi_board_info));
 518         omap_board_config = h2_config;
 519         omap_board_config_size = ARRAY_SIZE(h2_config);
 520         omap_serial_init();
 521 }
 522
 523 static void __init h2_map_io(void)
 524 {
 525         omap1_map_common_io();
 526 }
 527
 528 MACHINE_START(OMAP_H2, "TI-H2")
 529         /* Maintainer: Imre Deak <imre.deak@nokia.com> */
 530         .phys_io        = 0xfff00000,
 531         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 532         .boot_params    = 0x10000100,
 533         .map_io         = h2_map_io,
 534         .init_irq       = h2_init_irq,
 535         .init_machine   = h2_init,
 536         .timer          = &omap_timer,
 537 MACHINE_END