2 * arch/arm/mach-pnx4008/irq.c
4 * PNX4008 IRQ controller driver
6 * Author: Dmitry Chigirev <source@mvista.com>
8 * Based on reference code received from Philips:
9 * Copyright (C) 2003 Philips Semiconductors
11 * 2005 (c) MontaVista Software, Inc. This file is licensed under
12 * the terms of the GNU General Public License version 2. This program
13 * is licensed "as is" without any warranty of any kind, whether express
17 #include <linux/kernel.h>
18 #include <linux/types.h>
20 #include <linux/interrupt.h>
21 #include <linux/list.h>
22 #include <linux/init.h>
23 #include <linux/ioport.h>
24 #include <linux/device.h>
25 #include <linux/irq.h>
26 #include <mach/hardware.h>
28 #include <asm/setup.h>
29 #include <asm/pgtable.h>
31 #include <asm/system.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/irq.h>
34 #include <asm/mach/map.h>
37 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
39 static void pnx4008_mask_irq(unsigned int irq)
41 __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
44 static void pnx4008_unmask_irq(unsigned int irq)
46 __raw_writel(__raw_readl(INTC_ER(irq)) | INTC_BIT(irq), INTC_ER(irq)); /* unmask interrupt */
49 static void pnx4008_mask_ack_irq(unsigned int irq)
51 __raw_writel(__raw_readl(INTC_ER(irq)) & ~INTC_BIT(irq), INTC_ER(irq)); /* mask interrupt */
52 __raw_writel(INTC_BIT(irq), INTC_SR(irq)); /* clear interrupt status */
55 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
58 case IRQ_TYPE_EDGE_RISING:
59 __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
60 __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */
61 set_irq_handler(irq, handle_edge_irq);
63 case IRQ_TYPE_EDGE_FALLING:
64 __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
65 __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */
66 set_irq_handler(irq, handle_edge_irq);
68 case IRQ_TYPE_LEVEL_LOW:
69 __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
70 __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */
71 set_irq_handler(irq, handle_level_irq);
73 case IRQ_TYPE_LEVEL_HIGH:
74 __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
75 __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */
76 set_irq_handler(irq, handle_level_irq);
79 /* IRQ_TYPE_EDGE_BOTH is not supported */
81 printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
87 static struct irq_chip pnx4008_irq_chip = {
88 .ack = pnx4008_mask_ack_irq,
89 .mask = pnx4008_mask_irq,
90 .unmask = pnx4008_unmask_irq,
91 .set_type = pnx4008_set_irq_type,
94 void __init pnx4008_init_irq(void)
99 for (i = 0; i < NR_IRQS; i++) {
100 set_irq_flags(i, IRQF_VALID);
101 set_irq_chip(i, &pnx4008_irq_chip);
102 pnx4008_set_irq_type(i, pnx4008_irq_type[i]);
105 /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */
106 pnx4008_set_irq_type(SUB1_IRQ_N, pnx4008_irq_type[SUB1_IRQ_N]);
107 pnx4008_set_irq_type(SUB2_IRQ_N, pnx4008_irq_type[SUB2_IRQ_N]);
108 pnx4008_set_irq_type(SUB1_FIQ_N, pnx4008_irq_type[SUB1_FIQ_N]);
109 pnx4008_set_irq_type(SUB2_FIQ_N, pnx4008_irq_type[SUB2_FIQ_N]);
111 /* mask all others */
112 __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) |
113 (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N),
114 INTC_ER(MAIN_BASE_INT));
115 __raw_writel(0, INTC_ER(SIC1_BASE_INT));
116 __raw_writel(0, INTC_ER(SIC2_BASE_INT));