arch/arm/mach-versatile/core.c

   1 /*
   2  *  linux/arch/arm/mach-versatile/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/config.h>
  22 #include <linux/init.h>
  23 #include <linux/device.h>
  24 #include <linux/dma-mapping.h>
  25 #include <linux/sysdev.h>
  26 #include <linux/interrupt.h>
  27
  28 #include <asm/system.h>
  29 #include <asm/hardware.h>
  30 #include <asm/io.h>
  31 #include <asm/irq.h>
  32 #include <asm/leds.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/hardware/amba.h>
  35 #include <asm/hardware/amba_clcd.h>
  36 #include <asm/hardware/arm_timer.h>
  37 #include <asm/hardware/icst307.h>
  38
  39 #include <asm/mach/arch.h>
  40 #include <asm/mach/flash.h>
  41 #include <asm/mach/irq.h>
  42 #include <asm/mach/time.h>
  43 #include <asm/mach/map.h>
  44 #include <asm/mach/mmc.h>
  45
  46 #include "core.h"
  47 #include "clock.h"
  48
  49 /*
  50  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  51  * is the (PA >> 12).
  52  *
  53  * Setup a VA for the Versatile Vectored Interrupt Controller.
  54  */
  55 #define VA_VIC_BASE              IO_ADDRESS(VERSATILE_VIC_BASE)
  56 #define VA_SIC_BASE              IO_ADDRESS(VERSATILE_SIC_BASE)
  57
  58 static void vic_mask_irq(unsigned int irq)
  59 {
  60         irq -= IRQ_VIC_START;
  61         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
  62 }
  63
  64 static void vic_unmask_irq(unsigned int irq)
  65 {
  66         irq -= IRQ_VIC_START;
  67         writel(1 << irq, VA_VIC_BASE + VIC_IRQ_ENABLE);
  68 }
  69
  70 static struct irqchip vic_chip = {
  71         .ack    = vic_mask_irq,
  72         .mask   = vic_mask_irq,
  73         .unmask = vic_unmask_irq,
  74 };
  75
  76 static void sic_mask_irq(unsigned int irq)
  77 {
  78         irq -= IRQ_SIC_START;
  79         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
  80 }
  81
  82 static void sic_unmask_irq(unsigned int irq)
  83 {
  84         irq -= IRQ_SIC_START;
  85         writel(1 << irq, VA_SIC_BASE + SIC_IRQ_ENABLE_SET);
  86 }
  87
  88 static struct irqchip sic_chip = {
  89         .ack    = sic_mask_irq,
  90         .mask   = sic_mask_irq,
  91         .unmask = sic_unmask_irq,
  92 };
  93
  94 static void
  95 sic_handle_irq(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
  96 {
  97         unsigned long status = readl(VA_SIC_BASE + SIC_IRQ_STATUS);
  98
  99         if (status == 0) {
 100                 do_bad_IRQ(irq, desc, regs);
 101                 return;
 102         }
 103
 104         do {
 105                 irq = ffs(status) - 1;
 106                 status &= ~(1 << irq);
 107
 108                 irq += IRQ_SIC_START;
 109
 110                 desc = irq_desc + irq;
 111                 desc->handle(irq, desc, regs);
 112         } while (status);
 113 }
 114
 115 #if 1
 116 #define IRQ_MMCI0A      IRQ_VICSOURCE22
 117 #define IRQ_AACI        IRQ_VICSOURCE24
 118 #define IRQ_ETH         IRQ_VICSOURCE25
 119 #define PIC_MASK        0xFFD00000
 120 #else
 121 #define IRQ_MMCI0A      IRQ_SIC_MMCI0A
 122 #define IRQ_AACI        IRQ_SIC_AACI
 123 #define IRQ_ETH         IRQ_SIC_ETH
 124 #define PIC_MASK        0
 125 #endif
 126
 127 void __init versatile_init_irq(void)
 128 {
 129         unsigned int i, value;
 130
 131         /* Disable all interrupts initially. */
 132
 133         writel(0, VA_VIC_BASE + VIC_INT_SELECT);
 134         writel(0, VA_VIC_BASE + VIC_IRQ_ENABLE);
 135         writel(~0, VA_VIC_BASE + VIC_IRQ_ENABLE_CLEAR);
 136         writel(0, VA_VIC_BASE + VIC_IRQ_STATUS);
 137         writel(0, VA_VIC_BASE + VIC_ITCR);
 138         writel(~0, VA_VIC_BASE + VIC_IRQ_SOFT_CLEAR);
 139
 140         /*
 141          * Make sure we clear all existing interrupts
 142          */
 143         writel(0, VA_VIC_BASE + VIC_VECT_ADDR);
 144         for (i = 0; i < 19; i++) {
 145                 value = readl(VA_VIC_BASE + VIC_VECT_ADDR);
 146                 writel(value, VA_VIC_BASE + VIC_VECT_ADDR);
 147         }
 148
 149         for (i = 0; i < 16; i++) {
 150                 value = readl(VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 151                 writel(value | VICVectCntl_Enable | i, VA_VIC_BASE + VIC_VECT_CNTL0 + (i * 4));
 152         }
 153
 154         writel(32, VA_VIC_BASE + VIC_DEF_VECT_ADDR);
 155
 156         for (i = IRQ_VIC_START; i <= IRQ_VIC_END; i++) {
 157                 if (i != IRQ_VICSOURCE31) {
 158                         set_irq_chip(i, &vic_chip);
 159                         set_irq_handler(i, do_level_IRQ);
 160                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 161                 }
 162         }
 163
 164         set_irq_handler(IRQ_VICSOURCE31, sic_handle_irq);
 165         vic_unmask_irq(IRQ_VICSOURCE31);
 166
 167         /* Do second interrupt controller */
 168         writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
 169
 170         for (i = IRQ_SIC_START; i <= IRQ_SIC_END; i++) {
 171                 if ((PIC_MASK & (1 << (i - IRQ_SIC_START))) == 0) {
 172                         set_irq_chip(i, &sic_chip);
 173                         set_irq_handler(i, do_level_IRQ);
 174                         set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 175                 }
 176         }
 177
 178         /*
 179          * Interrupts on secondary controller from 0 to 8 are routed to
 180          * source 31 on PIC.
 181          * Interrupts from 21 to 31 are routed directly to the VIC on
 182          * the corresponding number on primary controller. This is controlled
 183          * by setting PIC_ENABLEx.
 184          */
 185         writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
 186 }
 187
 188 static struct map_desc versatile_io_desc[] __initdata = {
 189  { IO_ADDRESS(VERSATILE_SYS_BASE),   VERSATILE_SYS_BASE,   SZ_4K,      MT_DEVICE },
 190  { IO_ADDRESS(VERSATILE_SIC_BASE),   VERSATILE_SIC_BASE,   SZ_4K,      MT_DEVICE },
 191  { IO_ADDRESS(VERSATILE_VIC_BASE),   VERSATILE_VIC_BASE,   SZ_4K,      MT_DEVICE },
 192  { IO_ADDRESS(VERSATILE_SCTL_BASE),  VERSATILE_SCTL_BASE,  SZ_4K * 9,  MT_DEVICE },
 193 #ifdef CONFIG_MACH_VERSATILE_AB
 194  { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K,      MT_DEVICE },
 195  { IO_ADDRESS(VERSATILE_IB2_BASE),   VERSATILE_IB2_BASE,   SZ_64M,     MT_DEVICE },
 196 #endif
 197 #ifdef CONFIG_DEBUG_LL
 198  { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K,      MT_DEVICE },
 199 #endif
 200 #ifdef CONFIG_PCI
 201  { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
 202  { VERSATILE_PCI_VIRT_BASE,          VERSATILE_PCI_BASE,   VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
 203  { VERSATILE_PCI_CFG_VIRT_BASE,      VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
 204 #if 0
 205  { VERSATILE_PCI_VIRT_MEM_BASE0,     VERSATILE_PCI_MEM_BASE0, SZ_16M,  MT_DEVICE },
 206  { VERSATILE_PCI_VIRT_MEM_BASE1,     VERSATILE_PCI_MEM_BASE1, SZ_16M,  MT_DEVICE },
 207  { VERSATILE_PCI_VIRT_MEM_BASE2,     VERSATILE_PCI_MEM_BASE2, SZ_16M,  MT_DEVICE },
 208 #endif
 209 #endif
 210 };
 211
 212 void __init versatile_map_io(void)
 213 {
 214         iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 215 }
 216
 217 #define VERSATILE_REFCOUNTER    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
 218
 219 /*
 220  * This is the Versatile sched_clock implementation.  This has
 221  * a resolution of 41.7ns, and a maximum value of about 179s.
 222  */
 223 unsigned long long sched_clock(void)
 224 {
 225         unsigned long long v;
 226
 227         v = (unsigned long long)readl(VERSATILE_REFCOUNTER) * 125;
 228         do_div(v, 3);
 229
 230         return v;
 231 }
 232
 233
 234 #define VERSATILE_FLASHCTRL    (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 235
 236 static int versatile_flash_init(void)
 237 {
 238         u32 val;
 239
 240         val = __raw_readl(VERSATILE_FLASHCTRL);
 241         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 242         __raw_writel(val, VERSATILE_FLASHCTRL);
 243
 244         return 0;
 245 }
 246
 247 static void versatile_flash_exit(void)
 248 {
 249         u32 val;
 250
 251         val = __raw_readl(VERSATILE_FLASHCTRL);
 252         val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 253         __raw_writel(val, VERSATILE_FLASHCTRL);
 254 }
 255
 256 static void versatile_flash_set_vpp(int on)
 257 {
 258         u32 val;
 259
 260         val = __raw_readl(VERSATILE_FLASHCTRL);
 261         if (on)
 262                 val |= VERSATILE_FLASHPROG_FLVPPEN;
 263         else
 264                 val &= ~VERSATILE_FLASHPROG_FLVPPEN;
 265         __raw_writel(val, VERSATILE_FLASHCTRL);
 266 }
 267
 268 static struct flash_platform_data versatile_flash_data = {
 269         .map_name               = "cfi_probe",
 270         .width                  = 4,
 271         .init                   = versatile_flash_init,
 272         .exit                   = versatile_flash_exit,
 273         .set_vpp                = versatile_flash_set_vpp,
 274 };
 275
 276 static struct resource versatile_flash_resource = {
 277         .start                  = VERSATILE_FLASH_BASE,
 278         .end                    = VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE,
 279         .flags                  = IORESOURCE_MEM,
 280 };
 281
 282 static struct platform_device versatile_flash_device = {
 283         .name                   = "armflash",
 284         .id                     = 0,
 285         .dev                    = {
 286                 .platform_data  = &versatile_flash_data,
 287         },
 288         .num_resources          = 1,
 289         .resource               = &versatile_flash_resource,
 290 };
 291
 292 static struct resource smc91x_resources[] = {
 293         [0] = {
 294                 .start          = VERSATILE_ETH_BASE,
 295                 .end            = VERSATILE_ETH_BASE + SZ_64K - 1,
 296                 .flags          = IORESOURCE_MEM,
 297         },
 298         [1] = {
 299                 .start          = IRQ_ETH,
 300                 .end            = IRQ_ETH,
 301                 .flags          = IORESOURCE_IRQ,
 302         },
 303 };
 304
 305 static struct platform_device smc91x_device = {
 306         .name           = "smc91x",
 307         .id             = 0,
 308         .num_resources  = ARRAY_SIZE(smc91x_resources),
 309         .resource       = smc91x_resources,
 310 };
 311
 312 #define VERSATILE_SYSMCI        (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
 313
 314 unsigned int mmc_status(struct device *dev)
 315 {
 316         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 317         u32 mask;
 318
 319         if (adev->res.start == VERSATILE_MMCI0_BASE)
 320                 mask = 1;
 321         else
 322                 mask = 2;
 323
 324         return readl(VERSATILE_SYSMCI) & mask;
 325 }
 326
 327 static struct mmc_platform_data mmc0_plat_data = {
 328         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 329         .status         = mmc_status,
 330 };
 331
 332 /*
 333  * Clock handling
 334  */
 335 static const struct icst307_params versatile_oscvco_params = {
 336         .ref            = 24000,
 337         .vco_max        = 200000,
 338         .vd_min         = 4 + 8,
 339         .vd_max         = 511 + 8,
 340         .rd_min         = 1 + 2,
 341         .rd_max         = 127 + 2,
 342 };
 343
 344 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 345 {
 346         unsigned long sys_lock = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 347 #if defined(CONFIG_ARCH_VERSATILE_PB)
 348         unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
 349 #elif defined(CONFIG_MACH_VERSATILE_AB)
 350         unsigned long sys_osc = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
 351 #endif
 352         u32 val;
 353
 354         val = readl(sys_osc) & ~0x7ffff;
 355         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 356
 357         writel(0xa05f, sys_lock);
 358         writel(val, sys_osc);
 359         writel(0, sys_lock);
 360 }
 361
 362 static struct clk versatile_clcd_clk = {
 363         .name   = "CLCDCLK",
 364         .params = &versatile_oscvco_params,
 365         .setvco = versatile_oscvco_set,
 366 };
 367
 368 /*
 369  * CLCD support.
 370  */
 371 #define SYS_CLCD_MODE_MASK      (3 << 0)
 372 #define SYS_CLCD_MODE_888       (0 << 0)
 373 #define SYS_CLCD_MODE_5551      (1 << 0)
 374 #define SYS_CLCD_MODE_565_RLSB  (2 << 0)
 375 #define SYS_CLCD_MODE_565_BLSB  (3 << 0)
 376 #define SYS_CLCD_NLCDIOON       (1 << 2)
 377 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 378 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 379 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 380 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 381 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 382 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 383 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 384 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 385
 386 static struct clcd_panel vga = {
 387         .mode           = {
 388                 .name           = "VGA",
 389                 .refresh        = 60,
 390                 .xres           = 640,
 391                 .yres           = 480,
 392                 .pixclock       = 39721,
 393                 .left_margin    = 40,
 394                 .right_margin   = 24,
 395                 .upper_margin   = 32,
 396                 .lower_margin   = 11,
 397                 .hsync_len      = 96,
 398                 .vsync_len      = 2,
 399                 .sync           = 0,
 400                 .vmode          = FB_VMODE_NONINTERLACED,
 401         },
 402         .width          = -1,
 403         .height         = -1,
 404         .tim2           = TIM2_BCD | TIM2_IPC,
 405         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 406         .bpp            = 16,
 407 };
 408
 409 static struct clcd_panel sanyo_3_8_in = {
 410         .mode           = {
 411                 .name           = "Sanyo QVGA",
 412                 .refresh        = 116,
 413                 .xres           = 320,
 414                 .yres           = 240,
 415                 .pixclock       = 100000,
 416                 .left_margin    = 6,
 417                 .right_margin   = 6,
 418                 .upper_margin   = 5,
 419                 .lower_margin   = 5,
 420                 .hsync_len      = 6,
 421                 .vsync_len      = 6,
 422                 .sync           = 0,
 423                 .vmode          = FB_VMODE_NONINTERLACED,
 424         },
 425         .width          = -1,
 426         .height         = -1,
 427         .tim2           = TIM2_BCD,
 428         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 429         .bpp            = 16,
 430 };
 431
 432 static struct clcd_panel sanyo_2_5_in = {
 433         .mode           = {
 434                 .name           = "Sanyo QVGA Portrait",
 435                 .refresh        = 116,
 436                 .xres           = 240,
 437                 .yres           = 320,
 438                 .pixclock       = 100000,
 439                 .left_margin    = 20,
 440                 .right_margin   = 10,
 441                 .upper_margin   = 2,
 442                 .lower_margin   = 2,
 443                 .hsync_len      = 10,
 444                 .vsync_len      = 2,
 445                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 446                 .vmode          = FB_VMODE_NONINTERLACED,
 447         },
 448         .width          = -1,
 449         .height         = -1,
 450         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 451         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 452         .bpp            = 16,
 453 };
 454
 455 static struct clcd_panel epson_2_2_in = {
 456         .mode           = {
 457                 .name           = "Epson QCIF",
 458                 .refresh        = 390,
 459                 .xres           = 176,
 460                 .yres           = 220,
 461                 .pixclock       = 62500,
 462                 .left_margin    = 3,
 463                 .right_margin   = 2,
 464                 .upper_margin   = 1,
 465                 .lower_margin   = 0,
 466                 .hsync_len      = 3,
 467                 .vsync_len      = 2,
 468                 .sync           = 0,
 469                 .vmode          = FB_VMODE_NONINTERLACED,
 470         },
 471         .width          = -1,
 472         .height         = -1,
 473         .tim2           = TIM2_BCD | TIM2_IPC,
 474         .cntl           = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
 475         .bpp            = 16,
 476 };
 477
 478 /*
 479  * Detect which LCD panel is connected, and return the appropriate
 480  * clcd_panel structure.  Note: we do not have any information on
 481  * the required timings for the 8.4in panel, so we presently assume
 482  * VGA timings.
 483  */
 484 static struct clcd_panel *versatile_clcd_panel(void)
 485 {
 486         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 487         struct clcd_panel *panel = &vga;
 488         u32 val;
 489
 490         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 491         if (val == SYS_CLCD_ID_SANYO_3_8)
 492                 panel = &sanyo_3_8_in;
 493         else if (val == SYS_CLCD_ID_SANYO_2_5)
 494                 panel = &sanyo_2_5_in;
 495         else if (val == SYS_CLCD_ID_EPSON_2_2)
 496                 panel = &epson_2_2_in;
 497         else if (val == SYS_CLCD_ID_VGA)
 498                 panel = &vga;
 499         else {
 500                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 501                         val);
 502                 panel = &vga;
 503         }
 504
 505         return panel;
 506 }
 507
 508 /*
 509  * Disable all display connectors on the interface module.
 510  */
 511 static void versatile_clcd_disable(struct clcd_fb *fb)
 512 {
 513         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 514         u32 val;
 515
 516         val = readl(sys_clcd);
 517         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 518         writel(val, sys_clcd);
 519
 520 #ifdef CONFIG_MACH_VERSATILE_AB
 521         /*
 522          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 523          */
 524         if (fb->panel == &sanyo_2_5_in) {
 525                 unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
 526                 unsigned long ctrl;
 527
 528                 ctrl = readl(versatile_ib2_ctrl);
 529                 ctrl &= ~0x01;
 530                 writel(ctrl, versatile_ib2_ctrl);
 531         }
 532 #endif
 533 }
 534
 535 /*
 536  * Enable the relevant connector on the interface module.
 537  */
 538 static void versatile_clcd_enable(struct clcd_fb *fb)
 539 {
 540         unsigned long sys_clcd = IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
 541         u32 val;
 542
 543         val = readl(sys_clcd);
 544         val &= ~SYS_CLCD_MODE_MASK;
 545
 546         switch (fb->fb.var.green.length) {
 547         case 5:
 548                 val |= SYS_CLCD_MODE_5551;
 549                 break;
 550         case 6:
 551                 val |= SYS_CLCD_MODE_565_RLSB;
 552                 break;
 553         case 8:
 554                 val |= SYS_CLCD_MODE_888;
 555                 break;
 556         }
 557
 558         /*
 559          * Set the MUX
 560          */
 561         writel(val, sys_clcd);
 562
 563         /*
 564          * And now enable the PSUs
 565          */
 566         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 567         writel(val, sys_clcd);
 568
 569 #ifdef CONFIG_MACH_VERSATILE_AB
 570         /*
 571          * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 572          */
 573         if (fb->panel == &sanyo_2_5_in) {
 574                 unsigned long versatile_ib2_ctrl = IO_ADDRESS(VERSATILE_IB2_CTRL);
 575                 unsigned long ctrl;
 576
 577                 ctrl = readl(versatile_ib2_ctrl);
 578                 ctrl |= 0x01;
 579                 writel(ctrl, versatile_ib2_ctrl);
 580         }
 581 #endif
 582 }
 583
 584 static unsigned long framesize = SZ_1M;
 585
 586 static int versatile_clcd_setup(struct clcd_fb *fb)
 587 {
 588         dma_addr_t dma;
 589
 590         fb->panel               = versatile_clcd_panel();
 591
 592         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 593                                                     &dma, GFP_KERNEL);
 594         if (!fb->fb.screen_base) {
 595                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 596                 return -ENOMEM;
 597         }
 598
 599         fb->fb.fix.smem_start   = dma;
 600         fb->fb.fix.smem_len     = framesize;
 601
 602         return 0;
 603 }
 604
 605 static int versatile_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 606 {
 607         return dma_mmap_writecombine(&fb->dev->dev, vma,
 608                                      fb->fb.screen_base,
 609                                      fb->fb.fix.smem_start,
 610                                      fb->fb.fix.smem_len);
 611 }
 612
 613 static void versatile_clcd_remove(struct clcd_fb *fb)
 614 {
 615         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 616                               fb->fb.screen_base, fb->fb.fix.smem_start);
 617 }
 618
 619 static struct clcd_board clcd_plat_data = {
 620         .name           = "Versatile",
 621         .check          = clcdfb_check,
 622         .decode         = clcdfb_decode,
 623         .disable        = versatile_clcd_disable,
 624         .enable         = versatile_clcd_enable,
 625         .setup          = versatile_clcd_setup,
 626         .mmap           = versatile_clcd_mmap,
 627         .remove         = versatile_clcd_remove,
 628 };
 629
 630 #define AACI_IRQ        { IRQ_AACI, NO_IRQ }
 631 #define AACI_DMA        { 0x80, 0x81 }
 632 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
 633 #define MMCI0_DMA       { 0x84, 0 }
 634 #define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
 635 #define KMI0_DMA        { 0, 0 }
 636 #define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
 637 #define KMI1_DMA        { 0, 0 }
 638
 639 /*
 640  * These devices are connected directly to the multi-layer AHB switch
 641  */
 642 #define SMC_IRQ         { NO_IRQ, NO_IRQ }
 643 #define SMC_DMA         { 0, 0 }
 644 #define MPMC_IRQ        { NO_IRQ, NO_IRQ }
 645 #define MPMC_DMA        { 0, 0 }
 646 #define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
 647 #define CLCD_DMA        { 0, 0 }
 648 #define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
 649 #define DMAC_DMA        { 0, 0 }
 650
 651 /*
 652  * These devices are connected via the core APB bridge
 653  */
 654 #define SCTL_IRQ        { NO_IRQ, NO_IRQ }
 655 #define SCTL_DMA        { 0, 0 }
 656 #define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
 657 #define WATCHDOG_DMA    { 0, 0 }
 658 #define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
 659 #define GPIO0_DMA       { 0, 0 }
 660 #define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
 661 #define GPIO1_DMA       { 0, 0 }
 662 #define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
 663 #define RTC_DMA         { 0, 0 }
 664
 665 /*
 666  * These devices are connected via the DMA APB bridge
 667  */
 668 #define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
 669 #define SCI_DMA         { 7, 6 }
 670 #define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
 671 #define UART0_DMA       { 15, 14 }
 672 #define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
 673 #define UART1_DMA       { 13, 12 }
 674 #define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
 675 #define UART2_DMA       { 11, 10 }
 676 #define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
 677 #define SSP_DMA         { 9, 8 }
 678
 679 /* FPGA Primecells */
 680 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 681 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
 682 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 683 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 684
 685 /* DevChip Primecells */
 686 AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
 687 AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
 688 AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 689 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 690 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 691 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
 692 AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
 693 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 694 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 695 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 696 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
 697 AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
 698 AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
 699 AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
 700
 701 static struct amba_device *amba_devs[] __initdata = {
 702         &dmac_device,
 703         &uart0_device,
 704         &uart1_device,
 705         &uart2_device,
 706         &smc_device,
 707         &mpmc_device,
 708         &clcd_device,
 709         &sctl_device,
 710         &wdog_device,
 711         &gpio0_device,
 712         &gpio1_device,
 713         &rtc_device,
 714         &sci0_device,
 715         &ssp0_device,
 716         &aaci_device,
 717         &mmc0_device,
 718         &kmi0_device,
 719         &kmi1_device,
 720 };
 721
 722 #ifdef CONFIG_LEDS
 723 #define VA_LEDS_BASE (IO_ADDRESS(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET)
 724
 725 static void versatile_leds_event(led_event_t ledevt)
 726 {
 727         unsigned long flags;
 728         u32 val;
 729
 730         local_irq_save(flags);
 731         val = readl(VA_LEDS_BASE);
 732
 733         switch (ledevt) {
 734         case led_idle_start:
 735                 val = val & ~VERSATILE_SYS_LED0;
 736                 break;
 737
 738         case led_idle_end:
 739                 val = val | VERSATILE_SYS_LED0;
 740                 break;
 741
 742         case led_timer:
 743                 val = val ^ VERSATILE_SYS_LED1;
 744                 break;
 745
 746         case led_halted:
 747                 val = 0;
 748                 break;
 749
 750         default:
 751                 break;
 752         }
 753
 754         writel(val, VA_LEDS_BASE);
 755         local_irq_restore(flags);
 756 }
 757 #endif  /* CONFIG_LEDS */
 758
 759 void __init versatile_init(void)
 760 {
 761         int i;
 762
 763         clk_register(&versatile_clcd_clk);
 764
 765         platform_device_register(&versatile_flash_device);
 766         platform_device_register(&smc91x_device);
 767
 768         for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 769                 struct amba_device *d = amba_devs[i];
 770                 amba_device_register(d, &iomem_resource);
 771         }
 772
 773 #ifdef CONFIG_LEDS
 774         leds_event = versatile_leds_event;
 775 #endif
 776 }
 777
 778 /*
 779  * Where is the timer (VA)?
 780  */
 781 #define TIMER0_VA_BASE           IO_ADDRESS(VERSATILE_TIMER0_1_BASE)
 782 #define TIMER1_VA_BASE          (IO_ADDRESS(VERSATILE_TIMER0_1_BASE) + 0x20)
 783 #define TIMER2_VA_BASE           IO_ADDRESS(VERSATILE_TIMER2_3_BASE)
 784 #define TIMER3_VA_BASE          (IO_ADDRESS(VERSATILE_TIMER2_3_BASE) + 0x20)
 785 #define VA_IC_BASE               IO_ADDRESS(VERSATILE_VIC_BASE)
 786
 787 /*
 788  * How long is the timer interval?
 789  */
 790 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 791 #if TIMER_INTERVAL >= 0x100000
 792 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 793 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 794 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 795 #elif TIMER_INTERVAL >= 0x10000
 796 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 797 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 798 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 799 #else
 800 #define TIMER_RELOAD    (TIMER_INTERVAL)
 801 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 802 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 803 #endif
 804
 805 /*
 806  * Returns number of ms since last clock interrupt.  Note that interrupts
 807  * will have been disabled by do_gettimeoffset()
 808  */
 809 static unsigned long versatile_gettimeoffset(void)
 810 {
 811         unsigned long ticks1, ticks2, status;
 812
 813         /*
 814          * Get the current number of ticks.  Note that there is a race
 815          * condition between us reading the timer and checking for
 816          * an interrupt.  We get around this by ensuring that the
 817          * counter has not reloaded between our two reads.
 818          */
 819         ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 820         do {
 821                 ticks1 = ticks2;
 822                 status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
 823                 ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
 824         } while (ticks2 > ticks1);
 825
 826         /*
 827          * Number of ticks since last interrupt.
 828          */
 829         ticks1 = TIMER_RELOAD - ticks2;
 830
 831         /*
 832          * Interrupt pending?  If so, we've reloaded once already.
 833          *
 834          * FIXME: Need to check this is effectively timer 0 that expires
 835          */
 836         if (status & IRQMASK_TIMERINT0_1)
 837                 ticks1 += TIMER_RELOAD;
 838
 839         /*
 840          * Convert the ticks to usecs
 841          */
 842         return TICKS2USECS(ticks1);
 843 }
 844
 845 /*
 846  * IRQ handler for the timer
 847  */
 848 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 849 {
 850         write_seqlock(&xtime_lock);
 851
 852         // ...clear the interrupt
 853         writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 854
 855         timer_tick(regs);
 856
 857         write_sequnlock(&xtime_lock);
 858
 859         return IRQ_HANDLED;
 860 }
 861
 862 static struct irqaction versatile_timer_irq = {
 863         .name           = "Versatile Timer Tick",
 864         .flags          = SA_INTERRUPT | SA_TIMER,
 865         .handler        = versatile_timer_interrupt,
 866 };
 867
 868 /*
 869  * Set up timer interrupt, and return the current time in seconds.
 870  */
 871 static void __init versatile_timer_init(void)
 872 {
 873         u32 val;
 874
 875         /*
 876          * set clock frequency:
 877          *      VERSATILE_REFCLK is 32KHz
 878          *      VERSATILE_TIMCLK is 1MHz
 879          */
 880         val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
 881         writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
 882                (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
 883                (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
 884                (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
 885                IO_ADDRESS(VERSATILE_SCTL_BASE));
 886
 887         /*
 888          * Initialise to a known state (all timers off)
 889          */
 890         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
 891         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
 892         writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 893         writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 894
 895         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
 896         writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
 897         writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
 898                TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 899
 900         /*
 901          * Make irqs happen for the system timer
 902          */
 903         setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
 904 }
 905
 906 struct sys_timer versatile_timer = {
 907         .init           = versatile_timer_init,
 908         .offset         = versatile_gettimeoffset,
 909 };