2 * linux/arch/arm/plat-omap/devices.c
4 * Common platform device setup/initialization for OMAP1 and OMAP2
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
17 #include <mach/hardware.h>
19 #include <asm/mach-types.h>
20 #include <asm/mach/map.h>
23 #include <mach/control.h>
24 #include <mach/board.h>
26 #include <mach/gpio.h>
27 #include <mach/menelaus.h>
28 #include <mach/mcbsp.h>
29 #include <mach/dsp_common.h>
31 #if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
33 static struct dsp_platform_data dsp_pdata = {
34 .kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
37 static struct resource omap_dsp_resources[] = {
41 .flags = IORESOURCE_IRQ,
45 static struct platform_device omap_dsp_device = {
48 .num_resources = ARRAY_SIZE(omap_dsp_resources),
49 .resource = omap_dsp_resources,
51 .platform_data = &dsp_pdata,
55 static inline void omap_init_dsp(void)
60 if (cpu_is_omap15xx())
61 irq = INT_1510_DSP_MMU;
62 else if (cpu_is_omap16xx())
63 irq = INT_1610_DSP_MMU;
64 else if (cpu_is_omap24xx())
65 irq = INT_24XX_DSP_MMU;
67 res = platform_get_resource_byname(&omap_dsp_device,
68 IORESOURCE_IRQ, "dsp_mmu");
71 platform_device_register(&omap_dsp_device);
74 int dsp_kfunc_device_register(struct dsp_kfunc_device *kdev)
76 static DEFINE_MUTEX(dsp_pdata_lock);
78 spin_lock_init(&kdev->lock);
80 mutex_lock(&dsp_pdata_lock);
81 list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
82 mutex_unlock(&dsp_pdata_lock);
86 EXPORT_SYMBOL(dsp_kfunc_device_register);
89 static inline void omap_init_dsp(void) { }
90 #endif /* CONFIG_OMAP_DSP */
92 /*-------------------------------------------------------------------------*/
93 #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
95 static void omap_init_kp(void)
97 /* 2430 and 34xx keypad is on TWL4030 */
98 if (cpu_is_omap2430() || cpu_is_omap34xx())
101 if (machine_is_omap_h2() || machine_is_omap_h3()) {
102 omap_cfg_reg(F18_1610_KBC0);
103 omap_cfg_reg(D20_1610_KBC1);
104 omap_cfg_reg(D19_1610_KBC2);
105 omap_cfg_reg(E18_1610_KBC3);
106 omap_cfg_reg(C21_1610_KBC4);
108 omap_cfg_reg(G18_1610_KBR0);
109 omap_cfg_reg(F19_1610_KBR1);
110 omap_cfg_reg(H14_1610_KBR2);
111 omap_cfg_reg(E20_1610_KBR3);
112 omap_cfg_reg(E19_1610_KBR4);
113 omap_cfg_reg(N19_1610_KBR5);
114 } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
115 omap_cfg_reg(E2_730_KBR0);
116 omap_cfg_reg(J7_730_KBR1);
117 omap_cfg_reg(E1_730_KBR2);
118 omap_cfg_reg(F3_730_KBR3);
119 omap_cfg_reg(D2_730_KBR4);
121 omap_cfg_reg(C2_730_KBC0);
122 omap_cfg_reg(D3_730_KBC1);
123 omap_cfg_reg(E4_730_KBC2);
124 omap_cfg_reg(F4_730_KBC3);
125 omap_cfg_reg(E3_730_KBC4);
126 } else if (machine_is_omap_h4()) {
127 omap_cfg_reg(T19_24XX_KBR0);
128 omap_cfg_reg(R19_24XX_KBR1);
129 omap_cfg_reg(V18_24XX_KBR2);
130 omap_cfg_reg(M21_24XX_KBR3);
131 omap_cfg_reg(E5__24XX_KBR4);
132 if (omap_has_menelaus()) {
133 omap_cfg_reg(B3__24XX_KBR5);
134 omap_cfg_reg(AA4_24XX_KBC2);
135 omap_cfg_reg(B13_24XX_KBC6);
137 omap_cfg_reg(M18_24XX_KBR5);
138 omap_cfg_reg(H19_24XX_KBC2);
139 omap_cfg_reg(N19_24XX_KBC6);
141 omap_cfg_reg(R20_24XX_KBC0);
142 omap_cfg_reg(M14_24XX_KBC1);
143 omap_cfg_reg(V17_24XX_KBC3);
144 omap_cfg_reg(P21_24XX_KBC4);
145 omap_cfg_reg(L14_24XX_KBC5);
149 static inline void omap_init_kp(void) {}
152 /*-------------------------------------------------------------------------*/
153 #if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
155 static struct platform_device **omap_mcbsp_devices;
157 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
162 omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
164 if (!omap_mcbsp_devices) {
165 printk(KERN_ERR "Could not register McBSP devices\n");
169 for (i = 0; i < size; i++) {
170 struct platform_device *new_mcbsp;
173 new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
176 new_mcbsp->dev.platform_data = &config[i];
177 ret = platform_device_add(new_mcbsp);
179 platform_device_put(new_mcbsp);
182 omap_mcbsp_devices[i] = new_mcbsp;
187 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
192 /*-------------------------------------------------------------------------*/
194 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
196 #ifdef CONFIG_ARCH_OMAP24XX
197 #define OMAP_MMC1_BASE 0x4809c000
198 #define OMAP_MMC1_INT INT_24XX_MMC_IRQ
200 #define OMAP_MMC1_BASE 0xfffb7800
201 #define OMAP_MMC1_INT INT_MMC
203 #define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
205 static struct omap_mmc_conf mmc1_conf;
207 static u64 mmc1_dmamask = 0xffffffff;
209 static struct resource mmc1_resources[] = {
211 .start = OMAP_MMC1_BASE,
212 .end = OMAP_MMC1_BASE + 0x7f,
213 .flags = IORESOURCE_MEM,
216 .start = OMAP_MMC1_INT,
217 .flags = IORESOURCE_IRQ,
221 static struct platform_device mmc_omap_device1 = {
225 .dma_mask = &mmc1_dmamask,
226 .platform_data = &mmc1_conf,
228 .num_resources = ARRAY_SIZE(mmc1_resources),
229 .resource = mmc1_resources,
232 #ifdef CONFIG_ARCH_OMAP16XX
234 static struct omap_mmc_conf mmc2_conf;
236 static u64 mmc2_dmamask = 0xffffffff;
238 static struct resource mmc2_resources[] = {
240 .start = OMAP_MMC2_BASE,
241 .end = OMAP_MMC2_BASE + 0x7f,
242 .flags = IORESOURCE_MEM,
245 .start = INT_1610_MMC2,
246 .flags = IORESOURCE_IRQ,
250 static struct platform_device mmc_omap_device2 = {
254 .dma_mask = &mmc2_dmamask,
255 .platform_data = &mmc2_conf,
257 .num_resources = ARRAY_SIZE(mmc2_resources),
258 .resource = mmc2_resources,
262 static void __init omap_init_mmc(void)
264 const struct omap_mmc_config *mmc_conf;
265 const struct omap_mmc_conf *mmc;
267 /* NOTE: assumes MMC was never (wrongly) enabled */
268 mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
272 /* block 1 is always available and has just one pinout option */
273 mmc = &mmc_conf->mmc[0];
275 if (cpu_is_omap24xx()) {
276 omap_cfg_reg(H18_24XX_MMC_CMD);
277 omap_cfg_reg(H15_24XX_MMC_CLKI);
278 omap_cfg_reg(G19_24XX_MMC_CLKO);
279 omap_cfg_reg(F20_24XX_MMC_DAT0);
280 omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
281 omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
283 omap_cfg_reg(MMC_CMD);
284 omap_cfg_reg(MMC_CLK);
285 omap_cfg_reg(MMC_DAT0);
286 if (cpu_is_omap1710()) {
287 omap_cfg_reg(M15_1710_MMC_CLKI);
288 omap_cfg_reg(P19_1710_MMC_CMDDIR);
289 omap_cfg_reg(P20_1710_MMC_DATDIR0);
293 if (cpu_is_omap24xx()) {
294 omap_cfg_reg(H14_24XX_MMC_DAT1);
295 omap_cfg_reg(E19_24XX_MMC_DAT2);
296 omap_cfg_reg(D19_24XX_MMC_DAT3);
297 omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
298 omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
299 omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
301 omap_cfg_reg(MMC_DAT1);
302 /* NOTE: DAT2 can be on W10 (here) or M15 */
304 omap_cfg_reg(MMC_DAT2);
305 omap_cfg_reg(MMC_DAT3);
309 (void) platform_device_register(&mmc_omap_device1);
312 #ifdef CONFIG_ARCH_OMAP16XX
313 /* block 2 is on newer chips, and has many pinout options */
314 mmc = &mmc_conf->mmc[1];
317 omap_cfg_reg(Y8_1610_MMC2_CMD);
318 omap_cfg_reg(Y10_1610_MMC2_CLK);
319 omap_cfg_reg(R18_1610_MMC2_CLKIN);
320 omap_cfg_reg(W8_1610_MMC2_DAT0);
322 omap_cfg_reg(V8_1610_MMC2_DAT1);
323 omap_cfg_reg(W15_1610_MMC2_DAT2);
324 omap_cfg_reg(R10_1610_MMC2_DAT3);
327 /* These are needed for the level shifter */
328 omap_cfg_reg(V9_1610_MMC2_CMDDIR);
329 omap_cfg_reg(V5_1610_MMC2_DATDIR0);
330 omap_cfg_reg(W19_1610_MMC2_DATDIR1);
333 /* Feedback clock must be set on OMAP-1710 MMC2 */
334 if (cpu_is_omap1710())
335 omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
338 (void) platform_device_register(&mmc_omap_device2);
344 static inline void omap_init_mmc(void) {}
347 /*-------------------------------------------------------------------------*/
349 /* Numbering for the SPI-capable controllers when used for SPI:
356 #if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
358 #define OMAP_UWIRE_BASE 0xfffb3000
360 static struct resource uwire_resources[] = {
362 .start = OMAP_UWIRE_BASE,
363 .end = OMAP_UWIRE_BASE + 0x20,
364 .flags = IORESOURCE_MEM,
368 static struct platform_device omap_uwire_device = {
369 .name = "omap_uwire",
371 .num_resources = ARRAY_SIZE(uwire_resources),
372 .resource = uwire_resources,
375 static void omap_init_uwire(void)
377 /* FIXME define and use a boot tag; not all boards will be hooking
378 * up devices to the microwire controller, and multi-board configs
379 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
382 /* board-specific code must configure chipselects (only a few
383 * are normally used) and SCLK/SDI/SDO (each has two choices).
385 (void) platform_device_register(&omap_uwire_device);
388 static inline void omap_init_uwire(void) {}
391 /*-------------------------------------------------------------------------*/
393 #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
395 #ifdef CONFIG_ARCH_OMAP24XX
396 #define OMAP_WDT_BASE 0x48022000
398 #define OMAP_WDT_BASE 0xfffeb000
401 static struct resource wdt_resources[] = {
403 .start = OMAP_WDT_BASE,
404 .end = OMAP_WDT_BASE + 0x4f,
405 .flags = IORESOURCE_MEM,
409 static struct platform_device omap_wdt_device = {
412 .num_resources = ARRAY_SIZE(wdt_resources),
413 .resource = wdt_resources,
416 static void omap_init_wdt(void)
418 (void) platform_device_register(&omap_wdt_device);
421 static inline void omap_init_wdt(void) {}
424 /*-------------------------------------------------------------------------*/
426 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
428 #ifdef CONFIG_ARCH_OMAP24XX
429 #define OMAP_RNG_BASE 0x480A0000
431 #define OMAP_RNG_BASE 0xfffe5000
434 static struct resource rng_resources[] = {
436 .start = OMAP_RNG_BASE,
437 .end = OMAP_RNG_BASE + 0x4f,
438 .flags = IORESOURCE_MEM,
442 static struct platform_device omap_rng_device = {
445 .num_resources = ARRAY_SIZE(rng_resources),
446 .resource = rng_resources,
449 static void omap_init_rng(void)
451 (void) platform_device_register(&omap_rng_device);
454 static inline void omap_init_rng(void) {}
458 * This gets called after board-specific INIT_MACHINE, and initializes most
459 * on-chip peripherals accessible on this board (except for few like USB):
461 * (a) Does any "standard config" pin muxing needed. Board-specific
462 * code will have muxed GPIO pins and done "nonstandard" setup;
463 * that code could live in the boot loader.
464 * (b) Populating board-specific platform_data with the data drivers
465 * rely on to handle wiring variations.
466 * (c) Creating platform devices as meaningful on this board and
467 * with this kernel configuration.
469 * Claiming GPIOs, and setting their direction and initial values, is the
470 * responsibility of the device drivers. So is responding to probe().
472 * Board-specific knowlege like creating devices or pin setup is to be
473 * kept out of drivers as much as possible. In particular, pin setup
474 * may be handled by the boot loader, and drivers should expect it will
475 * normally have been done by the time they're probed.
477 static int __init omap_init_devices(void)
479 /* please keep these calls, and their implementations above,
480 * in alphabetical order so they're easier to sort through.
490 arch_initcall(omap_init_devices);