]> pilppa.org Git - linux-2.6-omap-h63xx.git/blob - arch/powerpc/platforms/8xx/mpc885ads.h
[POWERPC] Remove old includes from arch/ppc
[linux-2.6-omap-h63xx.git] / arch / powerpc / platforms / 8xx / mpc885ads.h
1 /*
2  * A collection of structures, addresses, and values associated with
3  * the Freescale MPC885ADS board.
4  * Copied from the FADS stuff.
5  *
6  * Author: MontaVista Software, Inc.
7  *         source@mvista.com
8  *
9  * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
10  * terms of the GNU General Public License version 2.  This program is licensed
11  * "as is" without any warranty of any kind, whether express or implied.
12  */
13
14 #ifdef __KERNEL__
15 #ifndef __ASM_MPC885ADS_H__
16 #define __ASM_MPC885ADS_H__
17
18 #include <sysdev/fsl_soc.h>
19
20 /* U-Boot maps BCSR to 0xff080000 */
21 #define BCSR_ADDR               ((uint)0xff080000)
22 #define BCSR_SIZE               ((uint)32)
23 #define BCSR0                   ((uint)(BCSR_ADDR + 0x00))
24 #define BCSR1                   ((uint)(BCSR_ADDR + 0x04))
25 #define BCSR2                   ((uint)(BCSR_ADDR + 0x08))
26 #define BCSR3                   ((uint)(BCSR_ADDR + 0x0c))
27 #define BCSR4                   ((uint)(BCSR_ADDR + 0x10))
28
29 #define CFG_PHYDEV_ADDR         ((uint)0xff0a0000)
30 #define BCSR5                   ((uint)(CFG_PHYDEV_ADDR + 0x300))
31
32 #define IMAP_ADDR               (get_immrbase())
33 #define IMAP_SIZE               ((uint)(64 * 1024))
34
35 #define MPC8xx_CPM_OFFSET       (0x9c0)
36 #define CPM_MAP_ADDR            (get_immrbase() + MPC8xx_CPM_OFFSET)
37 #define CPM_IRQ_OFFSET          16     // for compability with cpm_uart driver
38
39 #define PCMCIA_MEM_ADDR         ((uint)0xff020000)
40 #define PCMCIA_MEM_SIZE         ((uint)(64 * 1024))
41
42 /* Bits of interest in the BCSRs.
43  */
44 #define BCSR1_ETHEN             ((uint)0x20000000)
45 #define BCSR1_IRDAEN            ((uint)0x10000000)
46 #define BCSR1_RS232EN_1         ((uint)0x01000000)
47 #define BCSR1_PCCEN             ((uint)0x00800000)
48 #define BCSR1_PCCVCC0           ((uint)0x00400000)
49 #define BCSR1_PCCVPP0           ((uint)0x00200000)
50 #define BCSR1_PCCVPP1           ((uint)0x00100000)
51 #define BCSR1_PCCVPP_MASK       (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
52 #define BCSR1_RS232EN_2         ((uint)0x00040000)
53 #define BCSR1_PCCVCC1           ((uint)0x00010000)
54 #define BCSR1_PCCVCC_MASK       (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
55
56 #define BCSR4_ETH10_RST         ((uint)0x80000000)      /* 10Base-T PHY reset*/
57 #define BCSR4_USB_LO_SPD        ((uint)0x04000000)
58 #define BCSR4_USB_VCC           ((uint)0x02000000)
59 #define BCSR4_USB_FULL_SPD      ((uint)0x00040000)
60 #define BCSR4_USB_EN            ((uint)0x00020000)
61
62 #define BCSR5_MII2_EN           0x40
63 #define BCSR5_MII2_RST          0x20
64 #define BCSR5_T1_RST            0x10
65 #define BCSR5_ATM155_RST        0x08
66 #define BCSR5_ATM25_RST         0x04
67 #define BCSR5_MII1_EN           0x02
68 #define BCSR5_MII1_RST          0x01
69
70 /* Interrupt level assignments */
71 #define PHY_INTERRUPT   SIU_IRQ7        /* PHY link change interrupt */
72 #define SIU_INT_FEC1    SIU_LEVEL1      /* FEC1 interrupt */
73 #define SIU_INT_FEC2    SIU_LEVEL3      /* FEC2 interrupt */
74 #define FEC_INTERRUPT   SIU_INT_FEC1    /* FEC interrupt */
75
76 /* We don't use the 8259 */
77 #define NR_8259_INTS    0
78
79 /* CPM Ethernet through SCC3 */
80 #define PA_ENET_RXD     ((ushort)0x0040)
81 #define PA_ENET_TXD     ((ushort)0x0080)
82 #define PE_ENET_TCLK    ((uint)0x00004000)
83 #define PE_ENET_RCLK    ((uint)0x00008000)
84 #define PE_ENET_TENA    ((uint)0x00000010)
85 #define PC_ENET_CLSN    ((ushort)0x0400)
86 #define PC_ENET_RENA    ((ushort)0x0800)
87
88 /* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
89  * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
90 #define SICR_ENET_MASK  ((uint)0x00ff0000)
91 #define SICR_ENET_CLKRT ((uint)0x002c0000)
92
93 #endif /* __ASM_MPC885ADS_H__ */
94 #endif /* __KERNEL__ */