2 * i8259 interrupt controller driver.
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version
7 * 2 of the License, or (at your option) any later version.
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/interrupt.h>
13 #include <asm/i8259.h>
15 static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
17 static unsigned char cached_8259[2] = { 0xff, 0xff };
18 #define cached_A1 (cached_8259[0])
19 #define cached_21 (cached_8259[1])
21 static DEFINE_SPINLOCK(i8259_lock);
23 static int i8259_pic_irq_offset;
26 * Acknowledge the IRQ using either the PCI host bridge's interrupt
27 * acknowledge feature or poll. How i8259_init() is called determines
28 * which is called. It should be noted that polling is broken on some
29 * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
31 int i8259_irq(struct pt_regs *regs)
35 spin_lock(&i8259_lock);
37 /* Either int-ack or poll for the IRQ */
39 irq = readb(pci_intack);
41 /* Perform an interrupt acknowledge cycle on controller 1. */
42 outb(0x0C, 0x20); /* prepare for poll */
46 * Interrupt is cascaded so perform interrupt
47 * acknowledge on controller 2.
49 outb(0x0C, 0xA0); /* prepare for poll */
50 irq = (inb(0xA0) & 7) + 8;
56 * This may be a spurious interrupt.
58 * Read the interrupt status register (ISR). If the most
59 * significant bit is not set then there is no valid
63 outb(0x0B, 0x20); /* ISR register */
68 spin_unlock(&i8259_lock);
69 return irq + i8259_pic_irq_offset;
72 static void i8259_mask_and_ack_irq(unsigned int irq_nr)
76 spin_lock_irqsave(&i8259_lock, flags);
77 irq_nr -= i8259_pic_irq_offset;
79 cached_A1 |= 1 << (irq_nr-8);
80 inb(0xA1); /* DUMMY */
81 outb(cached_A1, 0xA1);
82 outb(0x20, 0xA0); /* Non-specific EOI */
83 outb(0x20, 0x20); /* Non-specific EOI to cascade */
85 cached_21 |= 1 << irq_nr;
86 inb(0x21); /* DUMMY */
87 outb(cached_21, 0x21);
88 outb(0x20, 0x20); /* Non-specific EOI */
90 spin_unlock_irqrestore(&i8259_lock, flags);
93 static void i8259_set_irq_mask(int irq_nr)
99 static void i8259_mask_irq(unsigned int irq_nr)
103 spin_lock_irqsave(&i8259_lock, flags);
104 irq_nr -= i8259_pic_irq_offset;
106 cached_21 |= 1 << irq_nr;
108 cached_A1 |= 1 << (irq_nr-8);
109 i8259_set_irq_mask(irq_nr);
110 spin_unlock_irqrestore(&i8259_lock, flags);
113 static void i8259_unmask_irq(unsigned int irq_nr)
117 spin_lock_irqsave(&i8259_lock, flags);
118 irq_nr -= i8259_pic_irq_offset;
120 cached_21 &= ~(1 << irq_nr);
122 cached_A1 &= ~(1 << (irq_nr-8));
123 i8259_set_irq_mask(irq_nr);
124 spin_unlock_irqrestore(&i8259_lock, flags);
127 static struct irq_chip i8259_pic = {
128 .typename = " i8259 ",
129 .mask = i8259_mask_irq,
130 .unmask = i8259_unmask_irq,
131 .mask_ack = i8259_mask_and_ack_irq,
134 static struct resource pic1_iores = {
135 .name = "8259 (master)",
138 .flags = IORESOURCE_BUSY,
141 static struct resource pic2_iores = {
142 .name = "8259 (slave)",
145 .flags = IORESOURCE_BUSY,
148 static struct resource pic_edgectrl_iores = {
149 .name = "8259 edge control",
152 .flags = IORESOURCE_BUSY,
155 static struct irqaction i8259_irqaction = {
156 .handler = no_action,
157 .flags = SA_INTERRUPT,
158 .mask = CPU_MASK_NONE,
159 .name = "82c59 secondary cascade",
164 * intack_addr - PCI interrupt acknowledge (real) address which will return
165 * the active irq from the 8259
167 void __init i8259_init(unsigned long intack_addr, int offset)
172 spin_lock_irqsave(&i8259_lock, flags);
173 i8259_pic_irq_offset = offset;
175 /* init master interrupt controller */
176 outb(0x11, 0x20); /* Start init sequence */
177 outb(0x00, 0x21); /* Vector base */
178 outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
179 outb(0x01, 0x21); /* Select 8086 mode */
181 /* init slave interrupt controller */
182 outb(0x11, 0xA0); /* Start init sequence */
183 outb(0x08, 0xA1); /* Vector base */
184 outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
185 outb(0x01, 0xA1); /* Select 8086 mode */
187 /* always read ISR */
191 /* Mask all interrupts */
192 outb(cached_A1, 0xA1);
193 outb(cached_21, 0x21);
195 spin_unlock_irqrestore(&i8259_lock, flags);
197 for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
198 set_irq_chip_and_handler(offset + i, &i8259_pic,
200 irq_desc[offset + i].status |= IRQ_LEVEL;
203 /* reserve our resources */
204 setup_irq(offset + 2, &i8259_irqaction);
205 request_resource(&ioport_resource, &pic1_iores);
206 request_resource(&ioport_resource, &pic2_iores);
207 request_resource(&ioport_resource, &pic_edgectrl_iores);
209 if (intack_addr != 0)
210 pci_intack = ioremap(intack_addr, 1);