2 * Local APIC handling, local APIC timers
4 * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
7 * Maciej W. Rozycki : Bits for genuine 82489DX APICs;
8 * thanks to Eric Gilmore
10 * for testing these extensively.
11 * Maciej W. Rozycki : Various updates and fixes.
12 * Mikael Pettersson : Power Management for UP-APIC.
14 * Mikael Pettersson : PM converted to driver model.
17 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <linux/bootmem.h>
22 #include <linux/interrupt.h>
23 #include <linux/mc146818rtc.h>
24 #include <linux/kernel_stat.h>
25 #include <linux/sysdev.h>
26 #include <linux/ioport.h>
27 #include <linux/clockchips.h>
28 #include <linux/acpi_pmtmr.h>
29 #include <linux/module.h>
30 #include <linux/dmar.h>
32 #include <asm/atomic.h>
35 #include <asm/mpspec.h>
37 #include <asm/pgalloc.h>
40 #include <asm/proto.h>
41 #include <asm/timex.h>
43 #include <asm/i8259.h>
46 #include <mach_apic.h>
48 /* Disable local APIC timer from the kernel commandline or via dmi quirk */
49 static int disable_apic_timer __cpuinitdata;
50 static int apic_calibrate_pmtmr __initdata;
55 /* x2apic enabled before OS handover */
56 int x2apic_preenabled;
58 /* Local APIC timer works in C2 */
59 int local_apic_timer_c2_ok;
60 EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
63 * Debug level, exported for io_apic.c
65 unsigned int apic_verbosity;
67 /* Have we found an MP table */
70 static struct resource lapic_resource = {
72 .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
75 static unsigned int calibration_result;
77 static int lapic_next_event(unsigned long delta,
78 struct clock_event_device *evt);
79 static void lapic_timer_setup(enum clock_event_mode mode,
80 struct clock_event_device *evt);
81 static void lapic_timer_broadcast(cpumask_t mask);
82 static void apic_pm_activate(void);
84 static struct clock_event_device lapic_clockevent = {
86 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
87 | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY,
89 .set_mode = lapic_timer_setup,
90 .set_next_event = lapic_next_event,
91 .broadcast = lapic_timer_broadcast,
95 static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
97 static unsigned long apic_phys;
99 unsigned long mp_lapic_addr;
101 unsigned int __cpuinitdata maxcpus = NR_CPUS;
103 * Get the LAPIC version
105 static inline int lapic_get_version(void)
107 return GET_APIC_VERSION(apic_read(APIC_LVR));
111 * Check, if the APIC is integrated or a seperate chip
113 static inline int lapic_is_integrated(void)
119 * Check, whether this is a modern or a first generation APIC
121 static int modern_apic(void)
123 /* AMD systems use old APIC versions, so check the CPU */
124 if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
125 boot_cpu_data.x86 >= 0xf)
127 return lapic_get_version() >= 0x14;
130 void xapic_wait_icr_idle(void)
132 while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
136 u32 safe_xapic_wait_icr_idle(void)
143 send_status = apic_read(APIC_ICR) & APIC_ICR_BUSY;
147 } while (timeout++ < 1000);
152 void xapic_icr_write(u32 low, u32 id)
154 apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
155 apic_write(APIC_ICR, low);
158 u64 xapic_icr_read(void)
162 icr2 = apic_read(APIC_ICR2);
163 icr1 = apic_read(APIC_ICR);
165 return (icr1 | ((u64)icr2 << 32));
168 static struct apic_ops xapic_ops = {
169 .read = native_apic_mem_read,
170 .write = native_apic_mem_write,
171 .icr_read = xapic_icr_read,
172 .icr_write = xapic_icr_write,
173 .wait_icr_idle = xapic_wait_icr_idle,
174 .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
177 struct apic_ops __read_mostly *apic_ops = &xapic_ops;
179 EXPORT_SYMBOL_GPL(apic_ops);
181 static void x2apic_wait_icr_idle(void)
183 /* no need to wait for icr idle in x2apic */
187 static u32 safe_x2apic_wait_icr_idle(void)
189 /* no need to wait for icr idle in x2apic */
193 void x2apic_icr_write(u32 low, u32 id)
195 wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
198 u64 x2apic_icr_read(void)
202 rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
206 static struct apic_ops x2apic_ops = {
207 .read = native_apic_msr_read,
208 .write = native_apic_msr_write,
209 .icr_read = x2apic_icr_read,
210 .icr_write = x2apic_icr_write,
211 .wait_icr_idle = x2apic_wait_icr_idle,
212 .safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
216 * enable_NMI_through_LVT0 - enable NMI through local vector table 0
218 void __cpuinit enable_NMI_through_LVT0(void)
222 /* unmask and set to NMI */
225 /* Level triggered for 82489DX (32bit mode) */
226 if (!lapic_is_integrated())
227 v |= APIC_LVT_LEVEL_TRIGGER;
229 apic_write(APIC_LVT0, v);
233 * lapic_get_maxlvt - get the maximum number of local vector table entries
235 int lapic_get_maxlvt(void)
239 v = apic_read(APIC_LVR);
241 * - we always have APIC integrated on 64bit mode
242 * - 82489DXs do not report # of LVT entries
244 return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
247 /* Clock divisor is set to 1 */
248 #define APIC_DIVISOR 1
251 * This function sets up the local APIC timer, with a timeout of
252 * 'clocks' APIC bus clock. During calibration we actually call
253 * this function twice on the boot CPU, once with a bogus timeout
254 * value, second time for real. The other (noncalibrating) CPUs
255 * call this function only once, with the real, calibrated value.
257 * We do reads before writes even if unnecessary, to get around the
258 * P5 APIC double write bug.
261 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
263 unsigned int lvtt_value, tmp_value;
265 lvtt_value = LOCAL_TIMER_VECTOR;
267 lvtt_value |= APIC_LVT_TIMER_PERIODIC;
268 if (!lapic_is_integrated())
269 lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
272 lvtt_value |= APIC_LVT_MASKED;
274 apic_write(APIC_LVTT, lvtt_value);
279 tmp_value = apic_read(APIC_TDCR);
280 apic_write(APIC_TDCR, (tmp_value
281 & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
285 apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
289 * Setup extended LVT, AMD specific (K8, family 10h)
291 * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
292 * MCE interrupts are supported. Thus MCE offset must be set to 0.
295 #define APIC_EILVT_LVTOFF_MCE 0
296 #define APIC_EILVT_LVTOFF_IBS 1
298 static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
300 unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
301 unsigned int v = (mask << 16) | (msg_type << 8) | vector;
306 u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
308 setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
309 return APIC_EILVT_LVTOFF_MCE;
312 u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
314 setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
315 return APIC_EILVT_LVTOFF_IBS;
319 * Program the next event, relative to now
321 static int lapic_next_event(unsigned long delta,
322 struct clock_event_device *evt)
324 apic_write(APIC_TMICT, delta);
329 * Setup the lapic timer in periodic or oneshot mode
331 static void lapic_timer_setup(enum clock_event_mode mode,
332 struct clock_event_device *evt)
337 /* Lapic used as dummy for broadcast ? */
338 if (evt->features & CLOCK_EVT_FEAT_DUMMY)
341 local_irq_save(flags);
344 case CLOCK_EVT_MODE_PERIODIC:
345 case CLOCK_EVT_MODE_ONESHOT:
346 __setup_APIC_LVTT(calibration_result,
347 mode != CLOCK_EVT_MODE_PERIODIC, 1);
349 case CLOCK_EVT_MODE_UNUSED:
350 case CLOCK_EVT_MODE_SHUTDOWN:
351 v = apic_read(APIC_LVTT);
352 v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
353 apic_write(APIC_LVTT, v);
355 case CLOCK_EVT_MODE_RESUME:
356 /* Nothing to do here */
360 local_irq_restore(flags);
364 * Local APIC timer broadcast function
366 static void lapic_timer_broadcast(cpumask_t mask)
369 send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
374 * Setup the local APIC timer for this CPU. Copy the initilized values
375 * of the boot CPU and register the clock event in the framework.
377 static void setup_APIC_timer(void)
379 struct clock_event_device *levt = &__get_cpu_var(lapic_events);
381 memcpy(levt, &lapic_clockevent, sizeof(*levt));
382 levt->cpumask = cpumask_of_cpu(smp_processor_id());
384 clockevents_register_device(levt);
388 * In this function we calibrate APIC bus clocks to the external
389 * timer. Unfortunately we cannot use jiffies and the timer irq
390 * to calibrate, since some later bootup code depends on getting
391 * the first irq? Ugh.
393 * We want to do the calibration only once since we
394 * want to have local timer irqs syncron. CPUs connected
395 * by the same APIC bus have the very same bus frequency.
396 * And we want to have irqs off anyways, no accidental
400 #define TICK_COUNT 100000000
402 static int __init calibrate_APIC_clock(void)
404 unsigned apic, apic_start;
405 unsigned long tsc, tsc_start;
411 * Put whatever arbitrary (but long enough) timeout
412 * value into the APIC clock, we just want to get the
413 * counter running for calibration.
415 * No interrupt enable !
417 __setup_APIC_LVTT(250000000, 0, 0);
419 apic_start = apic_read(APIC_TMCCT);
420 #ifdef CONFIG_X86_PM_TIMER
421 if (apic_calibrate_pmtmr && pmtmr_ioport) {
422 pmtimer_wait(5000); /* 5ms wait */
423 apic = apic_read(APIC_TMCCT);
424 result = (apic_start - apic) * 1000L / 5;
431 apic = apic_read(APIC_TMCCT);
433 } while ((tsc - tsc_start) < TICK_COUNT &&
434 (apic_start - apic) < TICK_COUNT);
436 result = (apic_start - apic) * 1000L * tsc_khz /
442 printk(KERN_DEBUG "APIC timer calibration result %d\n", result);
444 printk(KERN_INFO "Detected %d.%03d MHz APIC timer.\n",
445 result / 1000 / 1000, result / 1000 % 1000);
447 /* Calculate the scaled math multiplication factor */
448 lapic_clockevent.mult = div_sc(result, NSEC_PER_SEC,
449 lapic_clockevent.shift);
450 lapic_clockevent.max_delta_ns =
451 clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
452 lapic_clockevent.min_delta_ns =
453 clockevent_delta2ns(0xF, &lapic_clockevent);
455 calibration_result = (result * APIC_DIVISOR) / HZ;
458 * Do a sanity check on the APIC calibration result
460 if (calibration_result < (1000000 / HZ)) {
462 "APIC frequency too slow, disabling apic timer\n");
470 * Setup the boot APIC
472 * Calibrate and verify the result.
474 void __init setup_boot_APIC_clock(void)
477 * The local apic timer can be disabled via the kernel commandline.
478 * Register the lapic timer as a dummy clock event source on SMP
479 * systems, so the broadcast mechanism is used. On UP systems simply
482 if (disable_apic_timer) {
483 printk(KERN_INFO "Disabling APIC timer\n");
484 /* No broadcast on UP ! */
485 if (num_possible_cpus() > 1) {
486 lapic_clockevent.mult = 1;
492 printk(KERN_INFO "Using local APIC timer interrupts.\n");
493 if (calibrate_APIC_clock()) {
494 /* No broadcast on UP ! */
495 if (num_possible_cpus() > 1)
501 * If nmi_watchdog is set to IO_APIC, we need the
502 * PIT/HPET going. Otherwise register lapic as a dummy
505 if (nmi_watchdog != NMI_IO_APIC)
506 lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
508 printk(KERN_WARNING "APIC timer registered as dummy,"
509 " due to nmi_watchdog=%d!\n", nmi_watchdog);
514 void __cpuinit setup_secondary_APIC_clock(void)
520 * The guts of the apic timer interrupt
522 static void local_apic_timer_interrupt(void)
524 int cpu = smp_processor_id();
525 struct clock_event_device *evt = &per_cpu(lapic_events, cpu);
528 * Normally we should not be here till LAPIC has been initialized but
529 * in some cases like kdump, its possible that there is a pending LAPIC
530 * timer interrupt from previous kernel's context and is delivered in
531 * new kernel the moment interrupts are enabled.
533 * Interrupts are enabled early and LAPIC is setup much later, hence
534 * its possible that when we get here evt->event_handler is NULL.
535 * Check for event_handler being NULL and discard the interrupt as
538 if (!evt->event_handler) {
540 "Spurious LAPIC timer interrupt on cpu %d\n", cpu);
542 lapic_timer_setup(CLOCK_EVT_MODE_SHUTDOWN, evt);
547 * the NMI deadlock-detector uses this.
549 add_pda(apic_timer_irqs, 1);
551 evt->event_handler(evt);
555 * Local APIC timer interrupt. This is the most natural way for doing
556 * local interrupts, but local timer interrupts can be emulated by
557 * broadcast interrupts too. [in case the hw doesn't support APIC timers]
559 * [ if a single-CPU system runs an SMP kernel then we call the local
560 * interrupt as well. Thus we cannot inline the local irq ... ]
562 void smp_apic_timer_interrupt(struct pt_regs *regs)
564 struct pt_regs *old_regs = set_irq_regs(regs);
567 * NOTE! We'd better ACK the irq immediately,
568 * because timer handling can be slow.
572 * update_process_times() expects us to have done irq_enter().
573 * Besides, if we don't timer interrupts ignore the global
574 * interrupt lock, which is the WrongThing (tm) to do.
578 local_apic_timer_interrupt();
580 set_irq_regs(old_regs);
583 int setup_profiling_timer(unsigned int multiplier)
590 * Local APIC start and shutdown
594 * clear_local_APIC - shutdown the local APIC
596 * This is called, when a CPU is disabled and before rebooting, so the state of
597 * the local APIC has no dangling leftovers. Also used to cleanout any BIOS
598 * leftovers during boot.
600 void clear_local_APIC(void)
605 /* APIC hasn't been mapped yet */
609 maxlvt = lapic_get_maxlvt();
611 * Masking an LVT entry can trigger a local APIC error
612 * if the vector is zero. Mask LVTERR first to prevent this.
615 v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
616 apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
619 * Careful: we have to set masks only first to deassert
620 * any level-triggered sources.
622 v = apic_read(APIC_LVTT);
623 apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
624 v = apic_read(APIC_LVT0);
625 apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
626 v = apic_read(APIC_LVT1);
627 apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
629 v = apic_read(APIC_LVTPC);
630 apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
634 * Clean APIC state for other OSs:
636 apic_write(APIC_LVTT, APIC_LVT_MASKED);
637 apic_write(APIC_LVT0, APIC_LVT_MASKED);
638 apic_write(APIC_LVT1, APIC_LVT_MASKED);
640 apic_write(APIC_LVTERR, APIC_LVT_MASKED);
642 apic_write(APIC_LVTPC, APIC_LVT_MASKED);
643 apic_write(APIC_ESR, 0);
648 * disable_local_APIC - clear and disable the local APIC
650 void disable_local_APIC(void)
657 * Disable APIC (implies clearing of registers
660 value = apic_read(APIC_SPIV);
661 value &= ~APIC_SPIV_APIC_ENABLED;
662 apic_write(APIC_SPIV, value);
665 void lapic_shutdown(void)
672 local_irq_save(flags);
674 disable_local_APIC();
676 local_irq_restore(flags);
680 * This is to verify that we're looking at a real local APIC.
681 * Check these against your board if the CPUs aren't getting
682 * started for no apparent reason.
684 int __init verify_local_APIC(void)
686 unsigned int reg0, reg1;
689 * The version register is read-only in a real APIC.
691 reg0 = apic_read(APIC_LVR);
692 apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg0);
693 apic_write(APIC_LVR, reg0 ^ APIC_LVR_MASK);
694 reg1 = apic_read(APIC_LVR);
695 apic_printk(APIC_DEBUG, "Getting VERSION: %x\n", reg1);
698 * The two version reads above should print the same
699 * numbers. If the second one is different, then we
700 * poke at a non-APIC.
706 * Check if the version looks reasonably.
708 reg1 = GET_APIC_VERSION(reg0);
709 if (reg1 == 0x00 || reg1 == 0xff)
711 reg1 = lapic_get_maxlvt();
712 if (reg1 < 0x02 || reg1 == 0xff)
716 * The ID register is read/write in a real APIC.
718 reg0 = apic_read(APIC_ID);
719 apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
720 apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
721 reg1 = apic_read(APIC_ID);
722 apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
723 apic_write(APIC_ID, reg0);
724 if (reg1 != (reg0 ^ APIC_ID_MASK))
728 * The next two are just to see if we have sane values.
729 * They're only really relevant if we're in Virtual Wire
730 * compatibility mode, but most boxes are anymore.
732 reg0 = apic_read(APIC_LVT0);
733 apic_printk(APIC_DEBUG, "Getting LVT0: %x\n", reg0);
734 reg1 = apic_read(APIC_LVT1);
735 apic_printk(APIC_DEBUG, "Getting LVT1: %x\n", reg1);
741 * sync_Arb_IDs - synchronize APIC bus arbitration IDs
743 void __init sync_Arb_IDs(void)
745 /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
752 apic_wait_icr_idle();
754 apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
755 apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
760 * An initial setup of the virtual wire mode.
762 void __init init_bsp_APIC(void)
767 * Don't do the setup now if we have a SMP BIOS as the
768 * through-I/O-APIC virtual wire mode might be active.
770 if (smp_found_config || !cpu_has_apic)
773 value = apic_read(APIC_LVR);
776 * Do not trust the local APIC being empty at bootup.
783 value = apic_read(APIC_SPIV);
784 value &= ~APIC_VECTOR_MASK;
785 value |= APIC_SPIV_APIC_ENABLED;
786 value |= APIC_SPIV_FOCUS_DISABLED;
787 value |= SPURIOUS_APIC_VECTOR;
788 apic_write(APIC_SPIV, value);
791 * Set up the virtual wire mode.
793 apic_write(APIC_LVT0, APIC_DM_EXTINT);
795 apic_write(APIC_LVT1, value);
799 * setup_local_APIC - setup the local APIC
801 void __cpuinit setup_local_APIC(void)
807 value = apic_read(APIC_LVR);
809 BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
812 * Double-check whether this APIC is really registered.
813 * This is meaningless in clustered apic mode, so we skip it.
815 if (!apic_id_registered())
819 * Intel recommends to set DFR, LDR and TPR before enabling
820 * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
821 * document number 292116). So here it goes...
826 * Set Task Priority to 'accept all'. We never change this
829 value = apic_read(APIC_TASKPRI);
830 value &= ~APIC_TPRI_MASK;
831 apic_write(APIC_TASKPRI, value);
834 * After a crash, we no longer service the interrupts and a pending
835 * interrupt from previous kernel might still have ISR bit set.
837 * Most probably by now CPU has serviced that pending interrupt and
838 * it might not have done the ack_APIC_irq() because it thought,
839 * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
840 * does not clear the ISR bit and cpu thinks it has already serivced
841 * the interrupt. Hence a vector might get locked. It was noticed
842 * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
844 for (i = APIC_ISR_NR - 1; i >= 0; i--) {
845 value = apic_read(APIC_ISR + i*0x10);
846 for (j = 31; j >= 0; j--) {
853 * Now that we are all set up, enable the APIC
855 value = apic_read(APIC_SPIV);
856 value &= ~APIC_VECTOR_MASK;
860 value |= APIC_SPIV_APIC_ENABLED;
862 /* We always use processor focus */
865 * Set spurious IRQ vector
867 value |= SPURIOUS_APIC_VECTOR;
868 apic_write(APIC_SPIV, value);
873 * set up through-local-APIC on the BP's LINT0. This is not
874 * strictly necessary in pure symmetric-IO mode, but sometimes
875 * we delegate interrupts to the 8259A.
878 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
880 value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
881 if (!smp_processor_id() && !value) {
882 value = APIC_DM_EXTINT;
883 apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
886 value = APIC_DM_EXTINT | APIC_LVT_MASKED;
887 apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
890 apic_write(APIC_LVT0, value);
893 * only the BP should see the LINT1 NMI signal, obviously.
895 if (!smp_processor_id())
898 value = APIC_DM_NMI | APIC_LVT_MASKED;
899 apic_write(APIC_LVT1, value);
903 static void __cpuinit lapic_setup_esr(void)
905 unsigned maxlvt = lapic_get_maxlvt();
907 apic_write(APIC_LVTERR, ERROR_APIC_VECTOR);
909 * spec says clear errors after enabling vector.
912 apic_write(APIC_ESR, 0);
915 void __cpuinit end_local_APIC_setup(void)
918 setup_apic_nmi_watchdog(NULL);
922 void check_x2apic(void)
926 rdmsr(MSR_IA32_APICBASE, msr, msr2);
928 if (msr & X2APIC_ENABLE) {
929 printk("x2apic enabled by BIOS, switching to x2apic ops\n");
930 x2apic_preenabled = x2apic = 1;
931 apic_ops = &x2apic_ops;
935 void enable_x2apic(void)
939 rdmsr(MSR_IA32_APICBASE, msr, msr2);
940 if (!(msr & X2APIC_ENABLE)) {
941 printk("Enabling x2apic\n");
942 wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
946 void enable_IR_x2apic(void)
948 #ifdef CONFIG_INTR_REMAP
955 if (!x2apic_preenabled && disable_x2apic) {
957 "Skipped enabling x2apic and Interrupt-remapping "
958 "because of nox2apic\n");
962 if (x2apic_preenabled && disable_x2apic)
963 panic("Bios already enabled x2apic, can't enforce nox2apic");
965 if (!x2apic_preenabled && skip_ioapic_setup) {
967 "Skipped enabling x2apic and Interrupt-remapping "
968 "because of skipping io-apic setup\n");
972 ret = dmar_table_init();
975 "dmar_table_init() failed with %d:\n", ret);
977 if (x2apic_preenabled)
978 panic("x2apic enabled by bios. But IR enabling failed");
981 "Not enabling x2apic,Intr-remapping\n");
985 local_irq_save(flags);
987 save_mask_IO_APIC_setup();
989 ret = enable_intr_remapping(1);
991 if (ret && x2apic_preenabled) {
992 local_irq_restore(flags);
993 panic("x2apic enabled by bios. But IR enabling failed");
1001 apic_ops = &x2apic_ops;
1007 * IR enabling failed
1009 restore_IO_APIC_setup();
1011 reinit_intr_remapped_IO_APIC(x2apic_preenabled);
1014 local_irq_restore(flags);
1017 if (!x2apic_preenabled)
1019 "Enabled x2apic and interrupt-remapping\n");
1022 "Enabled Interrupt-remapping\n");
1025 "Failed to enable Interrupt-remapping and x2apic\n");
1027 if (!cpu_has_x2apic)
1030 if (x2apic_preenabled)
1031 panic("x2apic enabled prior OS handover,"
1032 " enable CONFIG_INTR_REMAP");
1034 printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
1042 * Detect and enable local APICs on non-SMP boards.
1043 * Original code written by Keir Fraser.
1044 * On AMD64 we trust the BIOS - if it says no APIC it is likely
1045 * not correctly set up (usually the APIC timer won't work etc.)
1047 static int __init detect_init_APIC(void)
1049 if (!cpu_has_apic) {
1050 printk(KERN_INFO "No local APIC present\n");
1054 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
1055 boot_cpu_physical_apicid = 0;
1059 void __init early_init_lapic_mapping(void)
1061 unsigned long phys_addr;
1064 * If no local APIC can be found then go out
1065 * : it means there is no mpatable and MADT
1067 if (!smp_found_config)
1070 phys_addr = mp_lapic_addr;
1072 set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
1073 apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
1074 APIC_BASE, phys_addr);
1077 * Fetch the APIC ID of the BSP in case we have a
1078 * default configuration (or the MP table is broken).
1080 boot_cpu_physical_apicid = read_apic_id();
1084 * init_apic_mappings - initialize APIC mappings
1086 void __init init_apic_mappings(void)
1089 boot_cpu_physical_apicid = read_apic_id();
1094 * If no local APIC can be found then set up a fake all
1095 * zeroes page to simulate the local APIC and another
1096 * one for the IO-APIC.
1098 if (!smp_found_config && detect_init_APIC()) {
1099 apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
1100 apic_phys = __pa(apic_phys);
1102 apic_phys = mp_lapic_addr;
1104 set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
1105 apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
1106 APIC_BASE, apic_phys);
1109 * Fetch the APIC ID of the BSP in case we have a
1110 * default configuration (or the MP table is broken).
1112 boot_cpu_physical_apicid = read_apic_id();
1116 * This initializes the IO-APIC and APIC hardware if this is
1119 int __init APIC_init_uniprocessor(void)
1122 printk(KERN_INFO "Apic disabled\n");
1125 if (!cpu_has_apic) {
1127 printk(KERN_INFO "Apic disabled by BIOS\n");
1132 setup_apic_routing();
1134 verify_local_APIC();
1138 physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
1139 apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
1144 * Now enable IO-APICs, actually call clear_IO_APIC
1145 * We need clear_IO_APIC before enabling vector on BP
1147 if (!skip_ioapic_setup && nr_ioapics)
1150 if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
1151 localise_nmi_watchdog();
1152 end_local_APIC_setup();
1154 if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
1158 setup_boot_APIC_clock();
1159 check_nmi_watchdog();
1164 * Local APIC interrupts
1168 * This interrupt should _never_ happen with our APIC/SMP architecture
1170 asmlinkage void smp_spurious_interrupt(void)
1176 * Check if this really is a spurious interrupt and ACK it
1177 * if it is a vectored one. Just in case...
1178 * Spurious interrupts should not be ACKed.
1180 v = apic_read(APIC_ISR + ((SPURIOUS_APIC_VECTOR & ~0x1f) >> 1));
1181 if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
1184 add_pda(irq_spurious_count, 1);
1189 * This interrupt should never happen with our APIC/SMP architecture
1191 asmlinkage void smp_error_interrupt(void)
1197 /* First tickle the hardware, only then report what went on. -- REW */
1198 v = apic_read(APIC_ESR);
1199 apic_write(APIC_ESR, 0);
1200 v1 = apic_read(APIC_ESR);
1202 atomic_inc(&irq_err_count);
1204 /* Here is what the APIC error bits mean:
1207 2: Send accept error
1208 3: Receive accept error
1210 5: Send illegal vector
1211 6: Received illegal vector
1212 7: Illegal register address
1214 printk(KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
1215 smp_processor_id(), v , v1);
1220 * * connect_bsp_APIC - attach the APIC to the interrupt system
1222 void __init connect_bsp_APIC(void)
1227 void disconnect_bsp_APIC(int virt_wire_setup)
1229 /* Go back to Virtual Wire compatibility mode */
1230 unsigned long value;
1232 /* For the spurious interrupt use vector F, and enable it */
1233 value = apic_read(APIC_SPIV);
1234 value &= ~APIC_VECTOR_MASK;
1235 value |= APIC_SPIV_APIC_ENABLED;
1237 apic_write(APIC_SPIV, value);
1239 if (!virt_wire_setup) {
1241 * For LVT0 make it edge triggered, active high,
1242 * external and enabled
1244 value = apic_read(APIC_LVT0);
1245 value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
1246 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
1247 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
1248 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
1249 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
1250 apic_write(APIC_LVT0, value);
1253 apic_write(APIC_LVT0, APIC_LVT_MASKED);
1256 /* For LVT1 make it edge triggered, active high, nmi and enabled */
1257 value = apic_read(APIC_LVT1);
1258 value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
1259 APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
1260 APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
1261 value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
1262 value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
1263 apic_write(APIC_LVT1, value);
1266 void __cpuinit generic_processor_info(int apicid, int version)
1271 if (num_processors >= NR_CPUS) {
1272 printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
1273 " Processor ignored.\n", NR_CPUS);
1277 if (num_processors >= maxcpus) {
1278 printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
1279 " Processor ignored.\n", maxcpus);
1284 cpus_complement(tmp_map, cpu_present_map);
1285 cpu = first_cpu(tmp_map);
1287 physid_set(apicid, phys_cpu_present_map);
1288 if (apicid == boot_cpu_physical_apicid) {
1290 * x86_bios_cpu_apicid is required to have processors listed
1291 * in same order as logical cpu numbers. Hence the first
1292 * entry is BSP, and so on.
1296 if (apicid > max_physical_apicid)
1297 max_physical_apicid = apicid;
1299 /* are we being called early in kernel startup? */
1300 if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
1301 u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
1302 u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
1304 cpu_to_apicid[cpu] = apicid;
1305 bios_cpu_apicid[cpu] = apicid;
1307 per_cpu(x86_cpu_to_apicid, cpu) = apicid;
1308 per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
1311 cpu_set(cpu, cpu_possible_map);
1312 cpu_set(cpu, cpu_present_map);
1315 int hard_smp_processor_id(void)
1317 return read_apic_id();
1326 /* 'active' is true if the local APIC was enabled by us and
1327 not the BIOS; this signifies that we are also responsible
1328 for disabling it before entering apm/acpi suspend */
1330 /* r/w apic fields */
1331 unsigned int apic_id;
1332 unsigned int apic_taskpri;
1333 unsigned int apic_ldr;
1334 unsigned int apic_dfr;
1335 unsigned int apic_spiv;
1336 unsigned int apic_lvtt;
1337 unsigned int apic_lvtpc;
1338 unsigned int apic_lvt0;
1339 unsigned int apic_lvt1;
1340 unsigned int apic_lvterr;
1341 unsigned int apic_tmict;
1342 unsigned int apic_tdcr;
1343 unsigned int apic_thmr;
1346 static int lapic_suspend(struct sys_device *dev, pm_message_t state)
1348 unsigned long flags;
1351 if (!apic_pm_state.active)
1354 maxlvt = lapic_get_maxlvt();
1356 apic_pm_state.apic_id = apic_read(APIC_ID);
1357 apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
1358 apic_pm_state.apic_ldr = apic_read(APIC_LDR);
1359 apic_pm_state.apic_dfr = apic_read(APIC_DFR);
1360 apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
1361 apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
1363 apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
1364 apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
1365 apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
1366 apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
1367 apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
1368 apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
1369 #ifdef CONFIG_X86_MCE_INTEL
1371 apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
1373 local_irq_save(flags);
1374 disable_local_APIC();
1375 local_irq_restore(flags);
1379 static int lapic_resume(struct sys_device *dev)
1382 unsigned long flags;
1385 if (!apic_pm_state.active)
1388 maxlvt = lapic_get_maxlvt();
1390 local_irq_save(flags);
1392 rdmsr(MSR_IA32_APICBASE, l, h);
1393 l &= ~MSR_IA32_APICBASE_BASE;
1394 l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
1395 wrmsr(MSR_IA32_APICBASE, l, h);
1399 apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
1400 apic_write(APIC_ID, apic_pm_state.apic_id);
1401 apic_write(APIC_DFR, apic_pm_state.apic_dfr);
1402 apic_write(APIC_LDR, apic_pm_state.apic_ldr);
1403 apic_write(APIC_TASKPRI, apic_pm_state.apic_taskpri);
1404 apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
1405 apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
1406 apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
1407 #ifdef CONFIG_X86_MCE_INTEL
1409 apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
1412 apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
1413 apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
1414 apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
1415 apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
1416 apic_write(APIC_ESR, 0);
1417 apic_read(APIC_ESR);
1418 apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
1419 apic_write(APIC_ESR, 0);
1420 apic_read(APIC_ESR);
1421 local_irq_restore(flags);
1425 static struct sysdev_class lapic_sysclass = {
1427 .resume = lapic_resume,
1428 .suspend = lapic_suspend,
1431 static struct sys_device device_lapic = {
1433 .cls = &lapic_sysclass,
1436 static void __cpuinit apic_pm_activate(void)
1438 apic_pm_state.active = 1;
1441 static int __init init_lapic_sysfs(void)
1447 /* XXX: remove suspend/resume procs if !apic_pm_state.active? */
1449 error = sysdev_class_register(&lapic_sysclass);
1451 error = sysdev_register(&device_lapic);
1454 device_initcall(init_lapic_sysfs);
1456 #else /* CONFIG_PM */
1458 static void apic_pm_activate(void) { }
1460 #endif /* CONFIG_PM */
1463 * apic_is_clustered_box() -- Check if we can expect good TSC
1465 * Thus far, the major user of this is IBM's Summit2 series:
1467 * Clustered boxes may have unsynced TSC problems if they are
1468 * multi-chassis. Use available data to take a good guess.
1469 * If in doubt, go HPET.
1471 __cpuinit int apic_is_clustered_box(void)
1473 int i, clusters, zeros;
1475 u16 *bios_cpu_apicid;
1476 DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
1479 * there is not this kind of box with AMD CPU yet.
1480 * Some AMD box with quadcore cpu and 8 sockets apicid
1481 * will be [4, 0x23] or [8, 0x27] could be thought to
1482 * vsmp box still need checking...
1484 if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
1487 bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
1488 bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
1490 for (i = 0; i < NR_CPUS; i++) {
1491 /* are we being called early in kernel startup? */
1492 if (bios_cpu_apicid) {
1493 id = bios_cpu_apicid[i];
1495 else if (i < nr_cpu_ids) {
1497 id = per_cpu(x86_bios_cpu_apicid, i);
1504 if (id != BAD_APICID)
1505 __set_bit(APIC_CLUSTERID(id), clustermap);
1508 /* Problem: Partially populated chassis may not have CPUs in some of
1509 * the APIC clusters they have been allocated. Only present CPUs have
1510 * x86_bios_cpu_apicid entries, thus causing zeroes in the bitmap.
1511 * Since clusters are allocated sequentially, count zeros only if
1512 * they are bounded by ones.
1516 for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
1517 if (test_bit(i, clustermap)) {
1518 clusters += 1 + zeros;
1524 /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
1525 * not guaranteed to be synced between boards
1527 if (is_vsmp_box() && clusters > 1)
1531 * If clusters > 2, then should be multi-chassis.
1532 * May have to revisit this when multi-core + hyperthreaded CPUs come
1533 * out, but AFAIK this will work even for them.
1535 return (clusters > 2);
1538 static __init int setup_nox2apic(char *str)
1541 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
1544 early_param("nox2apic", setup_nox2apic);
1548 * APIC command line parameters
1550 static int __init apic_set_verbosity(char *str)
1553 skip_ioapic_setup = 0;
1557 if (strcmp("debug", str) == 0)
1558 apic_verbosity = APIC_DEBUG;
1559 else if (strcmp("verbose", str) == 0)
1560 apic_verbosity = APIC_VERBOSE;
1562 printk(KERN_WARNING "APIC Verbosity level %s not recognised"
1563 " use apic=verbose or apic=debug\n", str);
1569 early_param("apic", apic_set_verbosity);
1571 static __init int setup_disableapic(char *str)
1574 setup_clear_cpu_cap(X86_FEATURE_APIC);
1577 early_param("disableapic", setup_disableapic);
1579 /* same as disableapic, for compatibility */
1580 static __init int setup_nolapic(char *str)
1582 return setup_disableapic(str);
1584 early_param("nolapic", setup_nolapic);
1586 static int __init parse_lapic_timer_c2_ok(char *arg)
1588 local_apic_timer_c2_ok = 1;
1591 early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
1593 static int __init parse_disable_apic_timer(char *arg)
1595 disable_apic_timer = 1;
1598 early_param("noapictimer", parse_disable_apic_timer);
1600 static int __init parse_nolapic_timer(char *arg)
1602 disable_apic_timer = 1;
1605 early_param("nolapic_timer", parse_nolapic_timer);
1607 static __init int setup_apicpmtimer(char *s)
1609 apic_calibrate_pmtmr = 1;
1613 __setup("apicpmtimer", setup_apicpmtimer);
1615 static int __init lapic_insert_resource(void)
1620 /* Put local APIC into the resource map. */
1621 lapic_resource.start = apic_phys;
1622 lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
1623 insert_resource(&iomem_resource, &lapic_resource);
1629 * need call insert after e820_reserve_resources()
1630 * that is using request_resource
1632 late_initcall(lapic_insert_resource);