2 * linux/drivers/char/pcmcia/synclink_cs.c
4 * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
6 * Device driver for Microgate SyncLink PC Card
7 * multiprotocol serial adapter.
9 * written by Paul Fulghum for Microgate Corporation
10 * paulkf@microgate.com
12 * Microgate and SyncLink are trademarks of Microgate Corporation
14 * This code is released under the GNU General Public License (GPL)
16 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
19 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
24 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
26 * OF THE POSSIBILITY OF SUCH DAMAGE.
29 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
31 # define BREAKPOINT() asm(" int $3");
33 # define BREAKPOINT() { }
36 #define MAX_DEVICE_COUNT 4
38 #include <linux/module.h>
39 #include <linux/errno.h>
40 #include <linux/signal.h>
41 #include <linux/sched.h>
42 #include <linux/timer.h>
43 #include <linux/time.h>
44 #include <linux/interrupt.h>
45 #include <linux/tty.h>
46 #include <linux/tty_flip.h>
47 #include <linux/serial.h>
48 #include <linux/major.h>
49 #include <linux/string.h>
50 #include <linux/fcntl.h>
51 #include <linux/ptrace.h>
52 #include <linux/ioport.h>
54 #include <linux/slab.h>
55 #include <linux/netdevice.h>
56 #include <linux/vmalloc.h>
57 #include <linux/init.h>
58 #include <linux/delay.h>
59 #include <linux/ioctl.h>
60 #include <linux/synclink.h>
62 #include <asm/system.h>
66 #include <linux/bitops.h>
67 #include <asm/types.h>
68 #include <linux/termios.h>
69 #include <linux/workqueue.h>
70 #include <linux/hdlc.h>
72 #include <pcmcia/cs_types.h>
73 #include <pcmcia/cs.h>
74 #include <pcmcia/cistpl.h>
75 #include <pcmcia/cisreg.h>
76 #include <pcmcia/ds.h>
78 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
79 #define SYNCLINK_GENERIC_HDLC 1
81 #define SYNCLINK_GENERIC_HDLC 0
84 #define GET_USER(error,value,addr) error = get_user(value,addr)
85 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
86 #define PUT_USER(error,value,addr) error = put_user(value,addr)
87 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
89 #include <asm/uaccess.h>
91 static MGSL_PARAMS default_params = {
92 MGSL_MODE_HDLC, /* unsigned long mode */
93 0, /* unsigned char loopback; */
94 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
95 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
96 0, /* unsigned long clock_speed; */
97 0xff, /* unsigned char addr_filter; */
98 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
99 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
100 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
101 9600, /* unsigned long data_rate; */
102 8, /* unsigned char data_bits; */
103 1, /* unsigned char stop_bits; */
104 ASYNC_PARITY_NONE /* unsigned char parity; */
110 unsigned char status;
114 /* The queue of BH actions to be performed */
117 #define BH_TRANSMIT 2
120 #define IO_PIN_SHUTDOWN_LIMIT 100
122 #define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
124 struct _input_signal_events {
137 * Device instance data structure
140 typedef struct _mgslpc_info {
141 void *if_ptr; /* General purpose pointer (used by SPPP) */
144 int count; /* count of opens */
146 unsigned short close_delay;
147 unsigned short closing_wait; /* time to wait before closing */
149 struct mgsl_icount icount;
151 struct tty_struct *tty;
153 int x_char; /* xon/xoff character */
154 int blocked_open; /* # of blocked opens */
155 unsigned char read_status_mask;
156 unsigned char ignore_status_mask;
158 unsigned char *tx_buf;
163 /* circular list of fixed length rx buffers */
165 unsigned char *rx_buf; /* memory allocated for all rx buffers */
166 int rx_buf_total_size; /* size of memory allocated for rx buffers */
167 int rx_put; /* index of next empty rx buffer */
168 int rx_get; /* index of next full rx buffer */
169 int rx_buf_size; /* size in bytes of single rx buffer */
170 int rx_buf_count; /* total number of rx buffers */
171 int rx_frame_count; /* number of full rx buffers */
173 wait_queue_head_t open_wait;
174 wait_queue_head_t close_wait;
176 wait_queue_head_t status_event_wait_q;
177 wait_queue_head_t event_wait_q;
178 struct timer_list tx_timer; /* HDLC transmit timeout timer */
179 struct _mgslpc_info *next_device; /* device list link */
181 unsigned short imra_value;
182 unsigned short imrb_value;
183 unsigned char pim_value;
186 struct work_struct task; /* task structure for scheduling bh */
195 int dcd_chkcount; /* check counts to prevent */
196 int cts_chkcount; /* too many IRQs if a signal */
197 int dsr_chkcount; /* is floating */
208 int if_mode; /* serial interface selection (RS-232, v.35 etc) */
210 char device_name[25]; /* device instance name */
212 unsigned int io_base; /* base I/O address of adapter */
213 unsigned int irq_level;
215 MGSL_PARAMS params; /* communications parameters */
217 unsigned char serial_signals; /* current serial signal states */
219 bool irq_occurred; /* for diagnostics use */
221 unsigned int init_error; /* startup error (DIAGS) */
223 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
224 bool drop_rts_on_tx_done;
226 struct _input_signal_events input_signal_events;
229 struct pcmcia_device *p_dev;
233 /* SPPP/Cisco HDLC device parts */
238 #if SYNCLINK_GENERIC_HDLC
239 struct net_device *netdev;
244 #define MGSLPC_MAGIC 0x5402
247 * The size of the serial xmit buffer is 1 page, or 4096 bytes
249 #define TXBUFSIZE 4096
252 #define CHA 0x00 /* channel A offset */
253 #define CHB 0x40 /* channel B offset */
256 * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
303 #define IRQ_BREAK_ON BIT15 // rx break detected
304 #define IRQ_DATAOVERRUN BIT14 // receive data overflow
305 #define IRQ_ALLSENT BIT13 // all sent
306 #define IRQ_UNDERRUN BIT12 // transmit data underrun
307 #define IRQ_TIMER BIT11 // timer interrupt
308 #define IRQ_CTS BIT10 // CTS status change
309 #define IRQ_TXREPEAT BIT9 // tx message repeat
310 #define IRQ_TXFIFO BIT8 // transmit pool ready
311 #define IRQ_RXEOM BIT7 // receive message end
312 #define IRQ_EXITHUNT BIT6 // receive frame start
313 #define IRQ_RXTIME BIT6 // rx char timeout
314 #define IRQ_DCD BIT2 // carrier detect status change
315 #define IRQ_OVERRUN BIT1 // receive frame overflow
316 #define IRQ_RXFIFO BIT0 // receive pool full
320 #define XFW BIT6 // transmit FIFO write enable
321 #define CEC BIT2 // command executing
322 #define CTS BIT1 // CTS state
327 #define PVR_AUTOCTS BIT3
328 #define PVR_RS232 0x20 /* 0010b */
329 #define PVR_V35 0xe0 /* 1110b */
330 #define PVR_RS422 0x40 /* 0100b */
332 /* Register access functions */
334 #define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
335 #define read_reg(info, reg) inb((info)->io_base + (reg))
337 #define read_reg16(info, reg) inw((info)->io_base + (reg))
338 #define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
340 #define set_reg_bits(info, reg, mask) \
341 write_reg(info, (reg), \
342 (unsigned char) (read_reg(info, (reg)) | (mask)))
343 #define clear_reg_bits(info, reg, mask) \
344 write_reg(info, (reg), \
345 (unsigned char) (read_reg(info, (reg)) & ~(mask)))
347 * interrupt enable/disable routines
349 static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
351 if (channel == CHA) {
352 info->imra_value |= mask;
353 write_reg16(info, CHA + IMR, info->imra_value);
355 info->imrb_value |= mask;
356 write_reg16(info, CHB + IMR, info->imrb_value);
359 static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
361 if (channel == CHA) {
362 info->imra_value &= ~mask;
363 write_reg16(info, CHA + IMR, info->imra_value);
365 info->imrb_value &= ~mask;
366 write_reg16(info, CHB + IMR, info->imrb_value);
370 #define port_irq_disable(info, mask) \
371 { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
373 #define port_irq_enable(info, mask) \
374 { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
376 static void rx_start(MGSLPC_INFO *info);
377 static void rx_stop(MGSLPC_INFO *info);
379 static void tx_start(MGSLPC_INFO *info);
380 static void tx_stop(MGSLPC_INFO *info);
381 static void tx_set_idle(MGSLPC_INFO *info);
383 static void get_signals(MGSLPC_INFO *info);
384 static void set_signals(MGSLPC_INFO *info);
386 static void reset_device(MGSLPC_INFO *info);
388 static void hdlc_mode(MGSLPC_INFO *info);
389 static void async_mode(MGSLPC_INFO *info);
391 static void tx_timeout(unsigned long context);
393 static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg);
395 #if SYNCLINK_GENERIC_HDLC
396 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
397 static void hdlcdev_tx_done(MGSLPC_INFO *info);
398 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
399 static int hdlcdev_init(MGSLPC_INFO *info);
400 static void hdlcdev_exit(MGSLPC_INFO *info);
403 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
405 static bool register_test(MGSLPC_INFO *info);
406 static bool irq_test(MGSLPC_INFO *info);
407 static int adapter_test(MGSLPC_INFO *info);
409 static int claim_resources(MGSLPC_INFO *info);
410 static void release_resources(MGSLPC_INFO *info);
411 static void mgslpc_add_device(MGSLPC_INFO *info);
412 static void mgslpc_remove_device(MGSLPC_INFO *info);
414 static bool rx_get_frame(MGSLPC_INFO *info);
415 static void rx_reset_buffers(MGSLPC_INFO *info);
416 static int rx_alloc_buffers(MGSLPC_INFO *info);
417 static void rx_free_buffers(MGSLPC_INFO *info);
419 static irqreturn_t mgslpc_isr(int irq, void *dev_id);
422 * Bottom half interrupt handlers
424 static void bh_handler(struct work_struct *work);
425 static void bh_transmit(MGSLPC_INFO *info);
426 static void bh_status(MGSLPC_INFO *info);
431 static int tiocmget(struct tty_struct *tty, struct file *file);
432 static int tiocmset(struct tty_struct *tty, struct file *file,
433 unsigned int set, unsigned int clear);
434 static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
435 static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
436 static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params);
437 static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
438 static int set_txidle(MGSLPC_INFO *info, int idle_mode);
439 static int set_txenable(MGSLPC_INFO *info, int enable);
440 static int tx_abort(MGSLPC_INFO *info);
441 static int set_rxenable(MGSLPC_INFO *info, int enable);
442 static int wait_events(MGSLPC_INFO *info, int __user *mask);
444 static MGSLPC_INFO *mgslpc_device_list = NULL;
445 static int mgslpc_device_count = 0;
448 * Set this param to non-zero to load eax with the
449 * .text section address and breakpoint on module load.
450 * This is useful for use with gdb and add-symbol-file command.
452 static int break_on_load=0;
455 * Driver major number, defaults to zero to get auto
456 * assigned major number. May be forced as module parameter.
458 static int ttymajor=0;
460 static int debug_level = 0;
461 static int maxframe[MAX_DEVICE_COUNT] = {0,};
462 static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1};
464 module_param(break_on_load, bool, 0);
465 module_param(ttymajor, int, 0);
466 module_param(debug_level, int, 0);
467 module_param_array(maxframe, int, NULL, 0);
468 module_param_array(dosyncppp, int, NULL, 0);
470 MODULE_LICENSE("GPL");
472 static char *driver_name = "SyncLink PC Card driver";
473 static char *driver_version = "$Revision: 4.34 $";
475 static struct tty_driver *serial_driver;
477 /* number of characters left in xmit buffer before we ask for more */
478 #define WAKEUP_CHARS 256
480 static void mgslpc_change_params(MGSLPC_INFO *info);
481 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
483 /* PCMCIA prototypes */
485 static int mgslpc_config(struct pcmcia_device *link);
486 static void mgslpc_release(u_long arg);
487 static void mgslpc_detach(struct pcmcia_device *p_dev);
490 * 1st function defined in .text section. Calling this function in
491 * init_module() followed by a breakpoint allows a remote debugger
492 * (gdb) to get the .text address for the add-symbol-file command.
493 * This allows remote debugging of dynamically loadable modules.
495 static void* mgslpc_get_text_ptr(void)
497 return mgslpc_get_text_ptr;
501 * line discipline callback wrappers
503 * The wrappers maintain line discipline references
504 * while calling into the line discipline.
506 * ldisc_flush_buffer - flush line discipline receive buffers
507 * ldisc_receive_buf - pass receive data to line discipline
510 static void ldisc_flush_buffer(struct tty_struct *tty)
512 struct tty_ldisc *ld = tty_ldisc_ref(tty);
514 if (ld->flush_buffer)
515 ld->flush_buffer(tty);
520 static void ldisc_receive_buf(struct tty_struct *tty,
521 const __u8 *data, char *flags, int count)
523 struct tty_ldisc *ld;
526 ld = tty_ldisc_ref(tty);
529 ld->receive_buf(tty, data, flags, count);
534 static int mgslpc_probe(struct pcmcia_device *link)
539 if (debug_level >= DEBUG_LEVEL_INFO)
540 printk("mgslpc_attach\n");
542 info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
544 printk("Error can't allocate device instance data\n");
548 info->magic = MGSLPC_MAGIC;
549 INIT_WORK(&info->task, bh_handler);
550 info->max_frame_size = 4096;
551 info->close_delay = 5*HZ/10;
552 info->closing_wait = 30*HZ;
553 init_waitqueue_head(&info->open_wait);
554 init_waitqueue_head(&info->close_wait);
555 init_waitqueue_head(&info->status_event_wait_q);
556 init_waitqueue_head(&info->event_wait_q);
557 spin_lock_init(&info->lock);
558 spin_lock_init(&info->netlock);
559 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
560 info->idle_mode = HDLC_TXIDLE_FLAGS;
561 info->imra_value = 0xffff;
562 info->imrb_value = 0xffff;
563 info->pim_value = 0xff;
568 /* Initialize the struct pcmcia_device structure */
570 /* Interrupt setup */
571 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
572 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
573 link->irq.Handler = NULL;
575 link->conf.Attributes = 0;
576 link->conf.IntType = INT_MEMORY_AND_IO;
578 ret = mgslpc_config(link);
582 mgslpc_add_device(info);
587 /* Card has been inserted.
590 #define CS_CHECK(fn, ret) \
591 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
593 static int mgslpc_config(struct pcmcia_device *link)
595 MGSLPC_INFO *info = link->priv;
598 int last_fn, last_ret;
600 cistpl_cftable_entry_t dflt = { 0 };
601 cistpl_cftable_entry_t *cfg;
603 if (debug_level >= DEBUG_LEVEL_INFO)
604 printk("mgslpc_config(0x%p)\n", link);
606 tuple.Attributes = 0;
607 tuple.TupleData = buf;
608 tuple.TupleDataMax = sizeof(buf);
609 tuple.TupleOffset = 0;
611 /* get CIS configuration entry */
613 tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
614 CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
616 cfg = &(parse.cftable_entry);
617 CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
618 CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
620 if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
624 link->conf.ConfigIndex = cfg->index;
625 link->conf.Attributes |= CONF_ENABLE_IRQ;
627 /* IO window settings */
628 link->io.NumPorts1 = 0;
629 if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
630 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
631 link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
632 if (!(io->flags & CISTPL_IO_8BIT))
633 link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
634 if (!(io->flags & CISTPL_IO_16BIT))
635 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
636 link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
637 link->io.BasePort1 = io->win[0].base;
638 link->io.NumPorts1 = io->win[0].len;
639 CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
642 link->conf.Attributes = CONF_ENABLE_IRQ;
643 link->conf.IntType = INT_MEMORY_AND_IO;
644 link->conf.ConfigIndex = 8;
645 link->conf.Present = PRESENT_OPTION;
647 link->irq.Attributes |= IRQ_HANDLE_PRESENT;
648 link->irq.Handler = mgslpc_isr;
649 link->irq.Instance = info;
650 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
652 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
654 info->io_base = link->io.BasePort1;
655 info->irq_level = link->irq.AssignedIRQ;
657 /* add to linked list of devices */
658 sprintf(info->node.dev_name, "mgslpc0");
659 info->node.major = info->node.minor = 0;
660 link->dev_node = &info->node;
662 printk(KERN_INFO "%s: index 0x%02x:",
663 info->node.dev_name, link->conf.ConfigIndex);
664 if (link->conf.Attributes & CONF_ENABLE_IRQ)
665 printk(", irq %d", link->irq.AssignedIRQ);
666 if (link->io.NumPorts1)
667 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
668 link->io.BasePort1+link->io.NumPorts1-1);
673 cs_error(link, last_fn, last_ret);
674 mgslpc_release((u_long)link);
678 /* Card has been removed.
679 * Unregister device and release PCMCIA configuration.
680 * If device is open, postpone until it is closed.
682 static void mgslpc_release(u_long arg)
684 struct pcmcia_device *link = (struct pcmcia_device *)arg;
686 if (debug_level >= DEBUG_LEVEL_INFO)
687 printk("mgslpc_release(0x%p)\n", link);
689 pcmcia_disable_device(link);
692 static void mgslpc_detach(struct pcmcia_device *link)
694 if (debug_level >= DEBUG_LEVEL_INFO)
695 printk("mgslpc_detach(0x%p)\n", link);
697 ((MGSLPC_INFO *)link->priv)->stop = 1;
698 mgslpc_release((u_long)link);
700 mgslpc_remove_device((MGSLPC_INFO *)link->priv);
703 static int mgslpc_suspend(struct pcmcia_device *link)
705 MGSLPC_INFO *info = link->priv;
712 static int mgslpc_resume(struct pcmcia_device *link)
714 MGSLPC_INFO *info = link->priv;
722 static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
723 char *name, const char *routine)
725 #ifdef MGSLPC_PARANOIA_CHECK
726 static const char *badmagic =
727 "Warning: bad magic number for mgsl struct (%s) in %s\n";
728 static const char *badinfo =
729 "Warning: null mgslpc_info for (%s) in %s\n";
732 printk(badinfo, name, routine);
735 if (info->magic != MGSLPC_MAGIC) {
736 printk(badmagic, name, routine);
747 #define CMD_RXFIFO BIT7 // release current rx FIFO
748 #define CMD_RXRESET BIT6 // receiver reset
749 #define CMD_RXFIFO_READ BIT5
750 #define CMD_START_TIMER BIT4
751 #define CMD_TXFIFO BIT3 // release current tx FIFO
752 #define CMD_TXEOM BIT1 // transmit end message
753 #define CMD_TXRESET BIT0 // transmit reset
755 static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
758 /* wait for command completion */
759 while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
767 static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
769 wait_command_complete(info, channel);
770 write_reg(info, (unsigned char) (channel + CMDR), cmd);
773 static void tx_pause(struct tty_struct *tty)
775 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
778 if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
780 if (debug_level >= DEBUG_LEVEL_INFO)
781 printk("tx_pause(%s)\n",info->device_name);
783 spin_lock_irqsave(&info->lock,flags);
784 if (info->tx_enabled)
786 spin_unlock_irqrestore(&info->lock,flags);
789 static void tx_release(struct tty_struct *tty)
791 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
794 if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
796 if (debug_level >= DEBUG_LEVEL_INFO)
797 printk("tx_release(%s)\n",info->device_name);
799 spin_lock_irqsave(&info->lock,flags);
800 if (!info->tx_enabled)
802 spin_unlock_irqrestore(&info->lock,flags);
805 /* Return next bottom half action to perform.
806 * or 0 if nothing to do.
808 static int bh_action(MGSLPC_INFO *info)
813 spin_lock_irqsave(&info->lock,flags);
815 if (info->pending_bh & BH_RECEIVE) {
816 info->pending_bh &= ~BH_RECEIVE;
818 } else if (info->pending_bh & BH_TRANSMIT) {
819 info->pending_bh &= ~BH_TRANSMIT;
821 } else if (info->pending_bh & BH_STATUS) {
822 info->pending_bh &= ~BH_STATUS;
827 /* Mark BH routine as complete */
828 info->bh_running = false;
829 info->bh_requested = false;
832 spin_unlock_irqrestore(&info->lock,flags);
837 static void bh_handler(struct work_struct *work)
839 MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
845 if (debug_level >= DEBUG_LEVEL_BH)
846 printk( "%s(%d):bh_handler(%s) entry\n",
847 __FILE__,__LINE__,info->device_name);
849 info->bh_running = true;
851 while((action = bh_action(info)) != 0) {
853 /* Process work item */
854 if ( debug_level >= DEBUG_LEVEL_BH )
855 printk( "%s(%d):bh_handler() work item action=%d\n",
856 __FILE__,__LINE__,action);
861 while(rx_get_frame(info));
870 /* unknown work item ID */
871 printk("Unknown work item ID=%08X!\n", action);
876 if (debug_level >= DEBUG_LEVEL_BH)
877 printk( "%s(%d):bh_handler(%s) exit\n",
878 __FILE__,__LINE__,info->device_name);
881 static void bh_transmit(MGSLPC_INFO *info)
883 struct tty_struct *tty = info->tty;
884 if (debug_level >= DEBUG_LEVEL_BH)
885 printk("bh_transmit() entry on %s\n", info->device_name);
891 static void bh_status(MGSLPC_INFO *info)
893 info->ri_chkcount = 0;
894 info->dsr_chkcount = 0;
895 info->dcd_chkcount = 0;
896 info->cts_chkcount = 0;
899 /* eom: non-zero = end of frame */
900 static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
902 unsigned char data[2];
903 unsigned char fifo_count, read_count, i;
904 RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
906 if (debug_level >= DEBUG_LEVEL_ISR)
907 printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom);
909 if (!info->rx_enabled)
912 if (info->rx_frame_count >= info->rx_buf_count) {
913 /* no more free buffers */
914 issue_command(info, CHA, CMD_RXRESET);
915 info->pending_bh |= BH_RECEIVE;
916 info->rx_overflow = true;
917 info->icount.buf_overrun++;
922 /* end of frame, get FIFO count from RBCL register */
923 if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f)))
929 if (fifo_count == 1) {
931 data[0] = read_reg(info, CHA + RXFIFO);
934 *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
936 fifo_count -= read_count;
937 if (!fifo_count && eom)
938 buf->status = data[--read_count];
940 for (i = 0; i < read_count; i++) {
941 if (buf->count >= info->max_frame_size) {
942 /* frame too large, reset receiver and reset current buffer */
943 issue_command(info, CHA, CMD_RXRESET);
947 *(buf->data + buf->count) = data[i];
950 } while (fifo_count);
953 info->pending_bh |= BH_RECEIVE;
954 info->rx_frame_count++;
956 if (info->rx_put >= info->rx_buf_count)
959 issue_command(info, CHA, CMD_RXFIFO);
962 static void rx_ready_async(MGSLPC_INFO *info, int tcd)
964 unsigned char data, status, flag;
967 struct tty_struct *tty = info->tty;
968 struct mgsl_icount *icount = &info->icount;
971 /* early termination, get FIFO count from RBCL register */
972 fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
974 /* Zero fifo count could mean 0 or 32 bytes available.
975 * If BIT5 of STAR is set then at least 1 byte is available.
977 if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
982 tty_buffer_request_room(tty, fifo_count);
983 /* Flush received async data to receive data buffer. */
985 data = read_reg(info, CHA + RXFIFO);
986 status = read_reg(info, CHA + RXFIFO);
992 // if no frameing/crc error then save data
994 // BIT6:framing error
996 if (status & (BIT7 + BIT6)) {
1002 /* discard char if tty control flags say so */
1003 if (status & info->ignore_status_mask)
1006 status &= info->read_status_mask;
1010 else if (status & BIT6)
1013 work += tty_insert_flip_char(tty, data, flag);
1015 issue_command(info, CHA, CMD_RXFIFO);
1017 if (debug_level >= DEBUG_LEVEL_ISR) {
1018 printk("%s(%d):rx_ready_async",
1020 printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
1021 __FILE__,__LINE__,icount->rx,icount->brk,
1022 icount->parity,icount->frame,icount->overrun);
1026 tty_flip_buffer_push(tty);
1030 static void tx_done(MGSLPC_INFO *info)
1032 if (!info->tx_active)
1035 info->tx_active = false;
1036 info->tx_aborting = false;
1038 if (info->params.mode == MGSL_MODE_ASYNC)
1041 info->tx_count = info->tx_put = info->tx_get = 0;
1042 del_timer(&info->tx_timer);
1044 if (info->drop_rts_on_tx_done) {
1046 if (info->serial_signals & SerialSignal_RTS) {
1047 info->serial_signals &= ~SerialSignal_RTS;
1050 info->drop_rts_on_tx_done = false;
1053 #if SYNCLINK_GENERIC_HDLC
1055 hdlcdev_tx_done(info);
1059 if (info->tty->stopped || info->tty->hw_stopped) {
1063 info->pending_bh |= BH_TRANSMIT;
1067 static void tx_ready(MGSLPC_INFO *info)
1069 unsigned char fifo_count = 32;
1072 if (debug_level >= DEBUG_LEVEL_ISR)
1073 printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name);
1075 if (info->params.mode == MGSL_MODE_HDLC) {
1076 if (!info->tx_active)
1079 if (info->tty->stopped || info->tty->hw_stopped) {
1083 if (!info->tx_count)
1084 info->tx_active = false;
1087 if (!info->tx_count)
1090 while (info->tx_count && fifo_count) {
1091 c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
1094 write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
1096 write_reg16(info, CHA + TXFIFO,
1097 *((unsigned short*)(info->tx_buf + info->tx_get)));
1099 info->tx_count -= c;
1100 info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
1104 if (info->params.mode == MGSL_MODE_ASYNC) {
1105 if (info->tx_count < WAKEUP_CHARS)
1106 info->pending_bh |= BH_TRANSMIT;
1107 issue_command(info, CHA, CMD_TXFIFO);
1110 issue_command(info, CHA, CMD_TXFIFO);
1112 issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
1116 static void cts_change(MGSLPC_INFO *info)
1119 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1120 irq_disable(info, CHB, IRQ_CTS);
1122 if (info->serial_signals & SerialSignal_CTS)
1123 info->input_signal_events.cts_up++;
1125 info->input_signal_events.cts_down++;
1126 wake_up_interruptible(&info->status_event_wait_q);
1127 wake_up_interruptible(&info->event_wait_q);
1129 if (info->flags & ASYNC_CTS_FLOW) {
1130 if (info->tty->hw_stopped) {
1131 if (info->serial_signals & SerialSignal_CTS) {
1132 if (debug_level >= DEBUG_LEVEL_ISR)
1133 printk("CTS tx start...");
1135 info->tty->hw_stopped = 0;
1137 info->pending_bh |= BH_TRANSMIT;
1141 if (!(info->serial_signals & SerialSignal_CTS)) {
1142 if (debug_level >= DEBUG_LEVEL_ISR)
1143 printk("CTS tx stop...");
1145 info->tty->hw_stopped = 1;
1150 info->pending_bh |= BH_STATUS;
1153 static void dcd_change(MGSLPC_INFO *info)
1156 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1157 irq_disable(info, CHB, IRQ_DCD);
1159 if (info->serial_signals & SerialSignal_DCD) {
1160 info->input_signal_events.dcd_up++;
1163 info->input_signal_events.dcd_down++;
1164 #if SYNCLINK_GENERIC_HDLC
1165 if (info->netcount) {
1166 if (info->serial_signals & SerialSignal_DCD)
1167 netif_carrier_on(info->netdev);
1169 netif_carrier_off(info->netdev);
1172 wake_up_interruptible(&info->status_event_wait_q);
1173 wake_up_interruptible(&info->event_wait_q);
1175 if (info->flags & ASYNC_CHECK_CD) {
1176 if (debug_level >= DEBUG_LEVEL_ISR)
1177 printk("%s CD now %s...", info->device_name,
1178 (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
1179 if (info->serial_signals & SerialSignal_DCD)
1180 wake_up_interruptible(&info->open_wait);
1182 if (debug_level >= DEBUG_LEVEL_ISR)
1183 printk("doing serial hangup...");
1185 tty_hangup(info->tty);
1188 info->pending_bh |= BH_STATUS;
1191 static void dsr_change(MGSLPC_INFO *info)
1194 if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1195 port_irq_disable(info, PVR_DSR);
1197 if (info->serial_signals & SerialSignal_DSR)
1198 info->input_signal_events.dsr_up++;
1200 info->input_signal_events.dsr_down++;
1201 wake_up_interruptible(&info->status_event_wait_q);
1202 wake_up_interruptible(&info->event_wait_q);
1203 info->pending_bh |= BH_STATUS;
1206 static void ri_change(MGSLPC_INFO *info)
1209 if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
1210 port_irq_disable(info, PVR_RI);
1212 if (info->serial_signals & SerialSignal_RI)
1213 info->input_signal_events.ri_up++;
1215 info->input_signal_events.ri_down++;
1216 wake_up_interruptible(&info->status_event_wait_q);
1217 wake_up_interruptible(&info->event_wait_q);
1218 info->pending_bh |= BH_STATUS;
1221 /* Interrupt service routine entry point.
1225 * irq interrupt number that caused interrupt
1226 * dev_id device ID supplied during interrupt registration
1228 static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
1230 MGSLPC_INFO *info = dev_id;
1232 unsigned char gis, pis;
1235 if (debug_level >= DEBUG_LEVEL_ISR)
1236 printk("mgslpc_isr(%d) entry.\n", info->irq_level);
1238 if (!(info->p_dev->_locked))
1241 spin_lock(&info->lock);
1243 while ((gis = read_reg(info, CHA + GIS))) {
1244 if (debug_level >= DEBUG_LEVEL_ISR)
1245 printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
1247 if ((gis & 0x70) || count > 1000) {
1248 printk("synclink_cs:hardware failed or ejected\n");
1253 if (gis & (BIT1 + BIT0)) {
1254 isr = read_reg16(info, CHB + ISR);
1260 if (gis & (BIT3 + BIT2))
1262 isr = read_reg16(info, CHA + ISR);
1263 if (isr & IRQ_TIMER) {
1264 info->irq_occurred = true;
1265 irq_disable(info, CHA, IRQ_TIMER);
1269 if (isr & IRQ_EXITHUNT) {
1270 info->icount.exithunt++;
1271 wake_up_interruptible(&info->event_wait_q);
1273 if (isr & IRQ_BREAK_ON) {
1275 if (info->flags & ASYNC_SAK)
1278 if (isr & IRQ_RXTIME) {
1279 issue_command(info, CHA, CMD_RXFIFO_READ);
1281 if (isr & (IRQ_RXEOM + IRQ_RXFIFO)) {
1282 if (info->params.mode == MGSL_MODE_HDLC)
1283 rx_ready_hdlc(info, isr & IRQ_RXEOM);
1285 rx_ready_async(info, isr & IRQ_RXEOM);
1289 if (isr & IRQ_UNDERRUN) {
1290 if (info->tx_aborting)
1291 info->icount.txabort++;
1293 info->icount.txunder++;
1296 else if (isr & IRQ_ALLSENT) {
1297 info->icount.txok++;
1300 else if (isr & IRQ_TXFIFO)
1304 pis = read_reg(info, CHA + PIS);
1312 /* Request bottom half processing if there's something
1313 * for it to do and the bh is not already running
1316 if (info->pending_bh && !info->bh_running && !info->bh_requested) {
1317 if ( debug_level >= DEBUG_LEVEL_ISR )
1318 printk("%s(%d):%s queueing bh task.\n",
1319 __FILE__,__LINE__,info->device_name);
1320 schedule_work(&info->task);
1321 info->bh_requested = true;
1324 spin_unlock(&info->lock);
1326 if (debug_level >= DEBUG_LEVEL_ISR)
1327 printk("%s(%d):mgslpc_isr(%d)exit.\n",
1328 __FILE__, __LINE__, info->irq_level);
1333 /* Initialize and start device.
1335 static int startup(MGSLPC_INFO * info)
1339 if (debug_level >= DEBUG_LEVEL_INFO)
1340 printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name);
1342 if (info->flags & ASYNC_INITIALIZED)
1345 if (!info->tx_buf) {
1346 /* allocate a page of memory for a transmit buffer */
1347 info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
1348 if (!info->tx_buf) {
1349 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
1350 __FILE__,__LINE__,info->device_name);
1355 info->pending_bh = 0;
1357 memset(&info->icount, 0, sizeof(info->icount));
1359 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
1361 /* Allocate and claim adapter resources */
1362 retval = claim_resources(info);
1364 /* perform existance check and diagnostics */
1366 retval = adapter_test(info);
1369 if (capable(CAP_SYS_ADMIN) && info->tty)
1370 set_bit(TTY_IO_ERROR, &info->tty->flags);
1371 release_resources(info);
1375 /* program hardware for current parameters */
1376 mgslpc_change_params(info);
1379 clear_bit(TTY_IO_ERROR, &info->tty->flags);
1381 info->flags |= ASYNC_INITIALIZED;
1386 /* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
1388 static void shutdown(MGSLPC_INFO * info)
1390 unsigned long flags;
1392 if (!(info->flags & ASYNC_INITIALIZED))
1395 if (debug_level >= DEBUG_LEVEL_INFO)
1396 printk("%s(%d):mgslpc_shutdown(%s)\n",
1397 __FILE__,__LINE__, info->device_name );
1399 /* clear status wait queue because status changes */
1400 /* can't happen after shutting down the hardware */
1401 wake_up_interruptible(&info->status_event_wait_q);
1402 wake_up_interruptible(&info->event_wait_q);
1404 del_timer_sync(&info->tx_timer);
1407 free_page((unsigned long) info->tx_buf);
1408 info->tx_buf = NULL;
1411 spin_lock_irqsave(&info->lock,flags);
1416 /* TODO:disable interrupts instead of reset to preserve signal states */
1419 if (!info->tty || info->tty->termios->c_cflag & HUPCL) {
1420 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
1424 spin_unlock_irqrestore(&info->lock,flags);
1426 release_resources(info);
1429 set_bit(TTY_IO_ERROR, &info->tty->flags);
1431 info->flags &= ~ASYNC_INITIALIZED;
1434 static void mgslpc_program_hw(MGSLPC_INFO *info)
1436 unsigned long flags;
1438 spin_lock_irqsave(&info->lock,flags);
1442 info->tx_count = info->tx_put = info->tx_get = 0;
1444 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
1451 info->dcd_chkcount = 0;
1452 info->cts_chkcount = 0;
1453 info->ri_chkcount = 0;
1454 info->dsr_chkcount = 0;
1456 irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
1457 port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
1460 if (info->netcount || info->tty->termios->c_cflag & CREAD)
1463 spin_unlock_irqrestore(&info->lock,flags);
1466 /* Reconfigure adapter based on new parameters
1468 static void mgslpc_change_params(MGSLPC_INFO *info)
1473 if (!info->tty || !info->tty->termios)
1476 if (debug_level >= DEBUG_LEVEL_INFO)
1477 printk("%s(%d):mgslpc_change_params(%s)\n",
1478 __FILE__,__LINE__, info->device_name );
1480 cflag = info->tty->termios->c_cflag;
1482 /* if B0 rate (hangup) specified then negate DTR and RTS */
1483 /* otherwise assert DTR and RTS */
1485 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1487 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
1489 /* byte size and parity */
1491 switch (cflag & CSIZE) {
1492 case CS5: info->params.data_bits = 5; break;
1493 case CS6: info->params.data_bits = 6; break;
1494 case CS7: info->params.data_bits = 7; break;
1495 case CS8: info->params.data_bits = 8; break;
1496 default: info->params.data_bits = 7; break;
1500 info->params.stop_bits = 2;
1502 info->params.stop_bits = 1;
1504 info->params.parity = ASYNC_PARITY_NONE;
1505 if (cflag & PARENB) {
1507 info->params.parity = ASYNC_PARITY_ODD;
1509 info->params.parity = ASYNC_PARITY_EVEN;
1512 info->params.parity = ASYNC_PARITY_SPACE;
1516 /* calculate number of jiffies to transmit a full
1517 * FIFO (32 bytes) at specified data rate
1519 bits_per_char = info->params.data_bits +
1520 info->params.stop_bits + 1;
1522 /* if port data rate is set to 460800 or less then
1523 * allow tty settings to override, otherwise keep the
1524 * current data rate.
1526 if (info->params.data_rate <= 460800) {
1527 info->params.data_rate = tty_get_baud_rate(info->tty);
1530 if ( info->params.data_rate ) {
1531 info->timeout = (32*HZ*bits_per_char) /
1532 info->params.data_rate;
1534 info->timeout += HZ/50; /* Add .02 seconds of slop */
1536 if (cflag & CRTSCTS)
1537 info->flags |= ASYNC_CTS_FLOW;
1539 info->flags &= ~ASYNC_CTS_FLOW;
1542 info->flags &= ~ASYNC_CHECK_CD;
1544 info->flags |= ASYNC_CHECK_CD;
1546 /* process tty input control flags */
1548 info->read_status_mask = 0;
1549 if (I_INPCK(info->tty))
1550 info->read_status_mask |= BIT7 | BIT6;
1551 if (I_IGNPAR(info->tty))
1552 info->ignore_status_mask |= BIT7 | BIT6;
1554 mgslpc_program_hw(info);
1557 /* Add a character to the transmit buffer
1559 static void mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
1561 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1562 unsigned long flags;
1564 if (debug_level >= DEBUG_LEVEL_INFO) {
1565 printk( "%s(%d):mgslpc_put_char(%d) on %s\n",
1566 __FILE__,__LINE__,ch,info->device_name);
1569 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
1575 spin_lock_irqsave(&info->lock,flags);
1577 if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
1578 if (info->tx_count < TXBUFSIZE - 1) {
1579 info->tx_buf[info->tx_put++] = ch;
1580 info->tx_put &= TXBUFSIZE-1;
1585 spin_unlock_irqrestore(&info->lock,flags);
1588 /* Enable transmitter so remaining characters in the
1589 * transmit buffer are sent.
1591 static void mgslpc_flush_chars(struct tty_struct *tty)
1593 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1594 unsigned long flags;
1596 if (debug_level >= DEBUG_LEVEL_INFO)
1597 printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
1598 __FILE__,__LINE__,info->device_name,info->tx_count);
1600 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
1603 if (info->tx_count <= 0 || tty->stopped ||
1604 tty->hw_stopped || !info->tx_buf)
1607 if (debug_level >= DEBUG_LEVEL_INFO)
1608 printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
1609 __FILE__,__LINE__,info->device_name);
1611 spin_lock_irqsave(&info->lock,flags);
1612 if (!info->tx_active)
1614 spin_unlock_irqrestore(&info->lock,flags);
1617 /* Send a block of data
1621 * tty pointer to tty information structure
1622 * buf pointer to buffer containing send data
1623 * count size of send data in bytes
1625 * Returns: number of characters written
1627 static int mgslpc_write(struct tty_struct * tty,
1628 const unsigned char *buf, int count)
1631 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1632 unsigned long flags;
1634 if (debug_level >= DEBUG_LEVEL_INFO)
1635 printk( "%s(%d):mgslpc_write(%s) count=%d\n",
1636 __FILE__,__LINE__,info->device_name,count);
1638 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
1642 if (info->params.mode == MGSL_MODE_HDLC) {
1643 if (count > TXBUFSIZE) {
1647 if (info->tx_active)
1649 else if (info->tx_count)
1655 min(TXBUFSIZE - info->tx_count - 1,
1656 TXBUFSIZE - info->tx_put));
1660 memcpy(info->tx_buf + info->tx_put, buf, c);
1662 spin_lock_irqsave(&info->lock,flags);
1663 info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
1664 info->tx_count += c;
1665 spin_unlock_irqrestore(&info->lock,flags);
1672 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
1673 spin_lock_irqsave(&info->lock,flags);
1674 if (!info->tx_active)
1676 spin_unlock_irqrestore(&info->lock,flags);
1679 if (debug_level >= DEBUG_LEVEL_INFO)
1680 printk( "%s(%d):mgslpc_write(%s) returning=%d\n",
1681 __FILE__,__LINE__,info->device_name,ret);
1685 /* Return the count of free bytes in transmit buffer
1687 static int mgslpc_write_room(struct tty_struct *tty)
1689 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1692 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
1695 if (info->params.mode == MGSL_MODE_HDLC) {
1696 /* HDLC (frame oriented) mode */
1697 if (info->tx_active)
1700 return HDLC_MAX_FRAME_SIZE;
1702 ret = TXBUFSIZE - info->tx_count - 1;
1707 if (debug_level >= DEBUG_LEVEL_INFO)
1708 printk("%s(%d):mgslpc_write_room(%s)=%d\n",
1709 __FILE__,__LINE__, info->device_name, ret);
1713 /* Return the count of bytes in transmit buffer
1715 static int mgslpc_chars_in_buffer(struct tty_struct *tty)
1717 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1720 if (debug_level >= DEBUG_LEVEL_INFO)
1721 printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
1722 __FILE__,__LINE__, info->device_name );
1724 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
1727 if (info->params.mode == MGSL_MODE_HDLC)
1728 rc = info->tx_active ? info->max_frame_size : 0;
1730 rc = info->tx_count;
1732 if (debug_level >= DEBUG_LEVEL_INFO)
1733 printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
1734 __FILE__,__LINE__, info->device_name, rc);
1739 /* Discard all data in the send buffer
1741 static void mgslpc_flush_buffer(struct tty_struct *tty)
1743 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1744 unsigned long flags;
1746 if (debug_level >= DEBUG_LEVEL_INFO)
1747 printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
1748 __FILE__,__LINE__, info->device_name );
1750 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
1753 spin_lock_irqsave(&info->lock,flags);
1754 info->tx_count = info->tx_put = info->tx_get = 0;
1755 del_timer(&info->tx_timer);
1756 spin_unlock_irqrestore(&info->lock,flags);
1758 wake_up_interruptible(&tty->write_wait);
1762 /* Send a high-priority XON/XOFF character
1764 static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
1766 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1767 unsigned long flags;
1769 if (debug_level >= DEBUG_LEVEL_INFO)
1770 printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
1771 __FILE__,__LINE__, info->device_name, ch );
1773 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
1778 spin_lock_irqsave(&info->lock,flags);
1779 if (!info->tx_enabled)
1781 spin_unlock_irqrestore(&info->lock,flags);
1785 /* Signal remote device to throttle send data (our receive data)
1787 static void mgslpc_throttle(struct tty_struct * tty)
1789 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1790 unsigned long flags;
1792 if (debug_level >= DEBUG_LEVEL_INFO)
1793 printk("%s(%d):mgslpc_throttle(%s) entry\n",
1794 __FILE__,__LINE__, info->device_name );
1796 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
1800 mgslpc_send_xchar(tty, STOP_CHAR(tty));
1802 if (tty->termios->c_cflag & CRTSCTS) {
1803 spin_lock_irqsave(&info->lock,flags);
1804 info->serial_signals &= ~SerialSignal_RTS;
1806 spin_unlock_irqrestore(&info->lock,flags);
1810 /* Signal remote device to stop throttling send data (our receive data)
1812 static void mgslpc_unthrottle(struct tty_struct * tty)
1814 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
1815 unsigned long flags;
1817 if (debug_level >= DEBUG_LEVEL_INFO)
1818 printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
1819 __FILE__,__LINE__, info->device_name );
1821 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
1828 mgslpc_send_xchar(tty, START_CHAR(tty));
1831 if (tty->termios->c_cflag & CRTSCTS) {
1832 spin_lock_irqsave(&info->lock,flags);
1833 info->serial_signals |= SerialSignal_RTS;
1835 spin_unlock_irqrestore(&info->lock,flags);
1839 /* get the current serial statistics
1841 static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
1844 if (debug_level >= DEBUG_LEVEL_INFO)
1845 printk("get_params(%s)\n", info->device_name);
1847 memset(&info->icount, 0, sizeof(info->icount));
1849 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
1856 /* get the current serial parameters
1858 static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
1861 if (debug_level >= DEBUG_LEVEL_INFO)
1862 printk("get_params(%s)\n", info->device_name);
1863 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
1869 /* set the serial parameters
1873 * info pointer to device instance data
1874 * new_params user buffer containing new serial params
1876 * Returns: 0 if success, otherwise error code
1878 static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params)
1880 unsigned long flags;
1881 MGSL_PARAMS tmp_params;
1884 if (debug_level >= DEBUG_LEVEL_INFO)
1885 printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
1886 info->device_name );
1887 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
1889 if ( debug_level >= DEBUG_LEVEL_INFO )
1890 printk( "%s(%d):set_params(%s) user buffer copy failed\n",
1891 __FILE__,__LINE__,info->device_name);
1895 spin_lock_irqsave(&info->lock,flags);
1896 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
1897 spin_unlock_irqrestore(&info->lock,flags);
1899 mgslpc_change_params(info);
1904 static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
1907 if (debug_level >= DEBUG_LEVEL_INFO)
1908 printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
1909 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
1915 static int set_txidle(MGSLPC_INFO * info, int idle_mode)
1917 unsigned long flags;
1918 if (debug_level >= DEBUG_LEVEL_INFO)
1919 printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
1920 spin_lock_irqsave(&info->lock,flags);
1921 info->idle_mode = idle_mode;
1923 spin_unlock_irqrestore(&info->lock,flags);
1927 static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
1930 if (debug_level >= DEBUG_LEVEL_INFO)
1931 printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
1932 COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
1938 static int set_interface(MGSLPC_INFO * info, int if_mode)
1940 unsigned long flags;
1942 if (debug_level >= DEBUG_LEVEL_INFO)
1943 printk("set_interface(%s,%d)\n", info->device_name, if_mode);
1944 spin_lock_irqsave(&info->lock,flags);
1945 info->if_mode = if_mode;
1947 val = read_reg(info, PVR) & 0x0f;
1948 switch (info->if_mode)
1950 case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
1951 case MGSL_INTERFACE_V35: val |= PVR_V35; break;
1952 case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
1954 write_reg(info, PVR, val);
1956 spin_unlock_irqrestore(&info->lock,flags);
1960 static int set_txenable(MGSLPC_INFO * info, int enable)
1962 unsigned long flags;
1964 if (debug_level >= DEBUG_LEVEL_INFO)
1965 printk("set_txenable(%s,%d)\n", info->device_name, enable);
1967 spin_lock_irqsave(&info->lock,flags);
1969 if (!info->tx_enabled)
1972 if (info->tx_enabled)
1975 spin_unlock_irqrestore(&info->lock,flags);
1979 static int tx_abort(MGSLPC_INFO * info)
1981 unsigned long flags;
1983 if (debug_level >= DEBUG_LEVEL_INFO)
1984 printk("tx_abort(%s)\n", info->device_name);
1986 spin_lock_irqsave(&info->lock,flags);
1987 if (info->tx_active && info->tx_count &&
1988 info->params.mode == MGSL_MODE_HDLC) {
1989 /* clear data count so FIFO is not filled on next IRQ.
1990 * This results in underrun and abort transmission.
1992 info->tx_count = info->tx_put = info->tx_get = 0;
1993 info->tx_aborting = true;
1995 spin_unlock_irqrestore(&info->lock,flags);
1999 static int set_rxenable(MGSLPC_INFO * info, int enable)
2001 unsigned long flags;
2003 if (debug_level >= DEBUG_LEVEL_INFO)
2004 printk("set_rxenable(%s,%d)\n", info->device_name, enable);
2006 spin_lock_irqsave(&info->lock,flags);
2008 if (!info->rx_enabled)
2011 if (info->rx_enabled)
2014 spin_unlock_irqrestore(&info->lock,flags);
2018 /* wait for specified event to occur
2020 * Arguments: info pointer to device instance data
2021 * mask pointer to bitmask of events to wait for
2022 * Return Value: 0 if successful and bit mask updated with
2023 * of events triggerred,
2024 * otherwise error code
2026 static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
2028 unsigned long flags;
2031 struct mgsl_icount cprev, cnow;
2034 struct _input_signal_events oldsigs, newsigs;
2035 DECLARE_WAITQUEUE(wait, current);
2037 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
2041 if (debug_level >= DEBUG_LEVEL_INFO)
2042 printk("wait_events(%s,%d)\n", info->device_name, mask);
2044 spin_lock_irqsave(&info->lock,flags);
2046 /* return immediately if state matches requested events */
2048 s = info->serial_signals;
2050 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
2051 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
2052 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
2053 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
2055 spin_unlock_irqrestore(&info->lock,flags);
2059 /* save current irq counts */
2060 cprev = info->icount;
2061 oldsigs = info->input_signal_events;
2063 if ((info->params.mode == MGSL_MODE_HDLC) &&
2064 (mask & MgslEvent_ExitHuntMode))
2065 irq_enable(info, CHA, IRQ_EXITHUNT);
2067 set_current_state(TASK_INTERRUPTIBLE);
2068 add_wait_queue(&info->event_wait_q, &wait);
2070 spin_unlock_irqrestore(&info->lock,flags);
2075 if (signal_pending(current)) {
2080 /* get current irq counts */
2081 spin_lock_irqsave(&info->lock,flags);
2082 cnow = info->icount;
2083 newsigs = info->input_signal_events;
2084 set_current_state(TASK_INTERRUPTIBLE);
2085 spin_unlock_irqrestore(&info->lock,flags);
2087 /* if no change, wait aborted for some reason */
2088 if (newsigs.dsr_up == oldsigs.dsr_up &&
2089 newsigs.dsr_down == oldsigs.dsr_down &&
2090 newsigs.dcd_up == oldsigs.dcd_up &&
2091 newsigs.dcd_down == oldsigs.dcd_down &&
2092 newsigs.cts_up == oldsigs.cts_up &&
2093 newsigs.cts_down == oldsigs.cts_down &&
2094 newsigs.ri_up == oldsigs.ri_up &&
2095 newsigs.ri_down == oldsigs.ri_down &&
2096 cnow.exithunt == cprev.exithunt &&
2097 cnow.rxidle == cprev.rxidle) {
2103 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
2104 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
2105 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
2106 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
2107 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
2108 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
2109 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
2110 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
2111 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
2112 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
2120 remove_wait_queue(&info->event_wait_q, &wait);
2121 set_current_state(TASK_RUNNING);
2123 if (mask & MgslEvent_ExitHuntMode) {
2124 spin_lock_irqsave(&info->lock,flags);
2125 if (!waitqueue_active(&info->event_wait_q))
2126 irq_disable(info, CHA, IRQ_EXITHUNT);
2127 spin_unlock_irqrestore(&info->lock,flags);
2131 PUT_USER(rc, events, mask_ptr);
2135 static int modem_input_wait(MGSLPC_INFO *info,int arg)
2137 unsigned long flags;
2139 struct mgsl_icount cprev, cnow;
2140 DECLARE_WAITQUEUE(wait, current);
2142 /* save current irq counts */
2143 spin_lock_irqsave(&info->lock,flags);
2144 cprev = info->icount;
2145 add_wait_queue(&info->status_event_wait_q, &wait);
2146 set_current_state(TASK_INTERRUPTIBLE);
2147 spin_unlock_irqrestore(&info->lock,flags);
2151 if (signal_pending(current)) {
2156 /* get new irq counts */
2157 spin_lock_irqsave(&info->lock,flags);
2158 cnow = info->icount;
2159 set_current_state(TASK_INTERRUPTIBLE);
2160 spin_unlock_irqrestore(&info->lock,flags);
2162 /* if no change, wait aborted for some reason */
2163 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2164 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2169 /* check for change in caller specified modem input */
2170 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
2171 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
2172 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
2173 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
2180 remove_wait_queue(&info->status_event_wait_q, &wait);
2181 set_current_state(TASK_RUNNING);
2185 /* return the state of the serial control and status signals
2187 static int tiocmget(struct tty_struct *tty, struct file *file)
2189 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2190 unsigned int result;
2191 unsigned long flags;
2193 spin_lock_irqsave(&info->lock,flags);
2195 spin_unlock_irqrestore(&info->lock,flags);
2197 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
2198 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
2199 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
2200 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
2201 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
2202 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
2204 if (debug_level >= DEBUG_LEVEL_INFO)
2205 printk("%s(%d):%s tiocmget() value=%08X\n",
2206 __FILE__,__LINE__, info->device_name, result );
2210 /* set modem control signals (DTR/RTS)
2212 static int tiocmset(struct tty_struct *tty, struct file *file,
2213 unsigned int set, unsigned int clear)
2215 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2216 unsigned long flags;
2218 if (debug_level >= DEBUG_LEVEL_INFO)
2219 printk("%s(%d):%s tiocmset(%x,%x)\n",
2220 __FILE__,__LINE__,info->device_name, set, clear);
2222 if (set & TIOCM_RTS)
2223 info->serial_signals |= SerialSignal_RTS;
2224 if (set & TIOCM_DTR)
2225 info->serial_signals |= SerialSignal_DTR;
2226 if (clear & TIOCM_RTS)
2227 info->serial_signals &= ~SerialSignal_RTS;
2228 if (clear & TIOCM_DTR)
2229 info->serial_signals &= ~SerialSignal_DTR;
2231 spin_lock_irqsave(&info->lock,flags);
2233 spin_unlock_irqrestore(&info->lock,flags);
2238 /* Set or clear transmit break condition
2240 * Arguments: tty pointer to tty instance data
2241 * break_state -1=set break condition, 0=clear
2243 static void mgslpc_break(struct tty_struct *tty, int break_state)
2245 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2246 unsigned long flags;
2248 if (debug_level >= DEBUG_LEVEL_INFO)
2249 printk("%s(%d):mgslpc_break(%s,%d)\n",
2250 __FILE__,__LINE__, info->device_name, break_state);
2252 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
2255 spin_lock_irqsave(&info->lock,flags);
2256 if (break_state == -1)
2257 set_reg_bits(info, CHA+DAFO, BIT6);
2259 clear_reg_bits(info, CHA+DAFO, BIT6);
2260 spin_unlock_irqrestore(&info->lock,flags);
2263 /* Service an IOCTL request
2267 * tty pointer to tty instance data
2268 * file pointer to associated file object for device
2269 * cmd IOCTL command code
2270 * arg command argument/context
2272 * Return Value: 0 if success, otherwise error code
2274 static int mgslpc_ioctl(struct tty_struct *tty, struct file * file,
2275 unsigned int cmd, unsigned long arg)
2277 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2279 if (debug_level >= DEBUG_LEVEL_INFO)
2280 printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
2281 info->device_name, cmd );
2283 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
2286 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
2287 (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
2288 if (tty->flags & (1 << TTY_IO_ERROR))
2292 return ioctl_common(info, cmd, arg);
2295 static int ioctl_common(MGSLPC_INFO *info, unsigned int cmd, unsigned long arg)
2298 struct mgsl_icount cnow; /* kernel counter temps */
2299 struct serial_icounter_struct __user *p_cuser; /* user space */
2300 void __user *argp = (void __user *)arg;
2301 unsigned long flags;
2304 case MGSL_IOCGPARAMS:
2305 return get_params(info, argp);
2306 case MGSL_IOCSPARAMS:
2307 return set_params(info, argp);
2308 case MGSL_IOCGTXIDLE:
2309 return get_txidle(info, argp);
2310 case MGSL_IOCSTXIDLE:
2311 return set_txidle(info, (int)arg);
2313 return get_interface(info, argp);
2315 return set_interface(info,(int)arg);
2316 case MGSL_IOCTXENABLE:
2317 return set_txenable(info,(int)arg);
2318 case MGSL_IOCRXENABLE:
2319 return set_rxenable(info,(int)arg);
2320 case MGSL_IOCTXABORT:
2321 return tx_abort(info);
2322 case MGSL_IOCGSTATS:
2323 return get_stats(info, argp);
2324 case MGSL_IOCWAITEVENT:
2325 return wait_events(info, argp);
2327 return modem_input_wait(info,(int)arg);
2329 spin_lock_irqsave(&info->lock,flags);
2330 cnow = info->icount;
2331 spin_unlock_irqrestore(&info->lock,flags);
2333 PUT_USER(error,cnow.cts, &p_cuser->cts);
2334 if (error) return error;
2335 PUT_USER(error,cnow.dsr, &p_cuser->dsr);
2336 if (error) return error;
2337 PUT_USER(error,cnow.rng, &p_cuser->rng);
2338 if (error) return error;
2339 PUT_USER(error,cnow.dcd, &p_cuser->dcd);
2340 if (error) return error;
2341 PUT_USER(error,cnow.rx, &p_cuser->rx);
2342 if (error) return error;
2343 PUT_USER(error,cnow.tx, &p_cuser->tx);
2344 if (error) return error;
2345 PUT_USER(error,cnow.frame, &p_cuser->frame);
2346 if (error) return error;
2347 PUT_USER(error,cnow.overrun, &p_cuser->overrun);
2348 if (error) return error;
2349 PUT_USER(error,cnow.parity, &p_cuser->parity);
2350 if (error) return error;
2351 PUT_USER(error,cnow.brk, &p_cuser->brk);
2352 if (error) return error;
2353 PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun);
2354 if (error) return error;
2357 return -ENOIOCTLCMD;
2362 /* Set new termios settings
2366 * tty pointer to tty structure
2367 * termios pointer to buffer to hold returned old termios
2369 static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
2371 MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
2372 unsigned long flags;
2374 if (debug_level >= DEBUG_LEVEL_INFO)
2375 printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__,
2376 tty->driver->name );
2378 /* just return if nothing has changed */
2379 if ((tty->termios->c_cflag == old_termios->c_cflag)
2380 && (RELEVANT_IFLAG(tty->termios->c_iflag)
2381 == RELEVANT_IFLAG(old_termios->c_iflag)))
2384 mgslpc_change_params(info);
2386 /* Handle transition to B0 status */
2387 if (old_termios->c_cflag & CBAUD &&
2388 !(tty->termios->c_cflag & CBAUD)) {
2389 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2390 spin_lock_irqsave(&info->lock,flags);
2392 spin_unlock_irqrestore(&info->lock,flags);
2395 /* Handle transition away from B0 status */
2396 if (!(old_termios->c_cflag & CBAUD) &&
2397 tty->termios->c_cflag & CBAUD) {
2398 info->serial_signals |= SerialSignal_DTR;
2399 if (!(tty->termios->c_cflag & CRTSCTS) ||
2400 !test_bit(TTY_THROTTLED, &tty->flags)) {
2401 info->serial_signals |= SerialSignal_RTS;
2403 spin_lock_irqsave(&info->lock,flags);
2405 spin_unlock_irqrestore(&info->lock,flags);
2408 /* Handle turning off CRTSCTS */
2409 if (old_termios->c_cflag & CRTSCTS &&
2410 !(tty->termios->c_cflag & CRTSCTS)) {
2411 tty->hw_stopped = 0;
2416 static void mgslpc_close(struct tty_struct *tty, struct file * filp)
2418 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2420 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
2423 if (debug_level >= DEBUG_LEVEL_INFO)
2424 printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
2425 __FILE__,__LINE__, info->device_name, info->count);
2430 if (tty_hung_up_p(filp))
2433 if ((tty->count == 1) && (info->count != 1)) {
2435 * tty->count is 1 and the tty structure will be freed.
2436 * info->count should be one in this case.
2437 * if it's not, correct it so that the port is shutdown.
2439 printk("mgslpc_close: bad refcount; tty->count is 1, "
2440 "info->count is %d\n", info->count);
2446 /* if at least one open remaining, leave hardware active */
2450 info->flags |= ASYNC_CLOSING;
2452 /* set tty->closing to notify line discipline to
2453 * only process XON/XOFF characters. Only the N_TTY
2454 * discipline appears to use this (ppp does not).
2458 /* wait for transmit data to clear all layers */
2460 if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) {
2461 if (debug_level >= DEBUG_LEVEL_INFO)
2462 printk("%s(%d):mgslpc_close(%s) calling tty_wait_until_sent\n",
2463 __FILE__,__LINE__, info->device_name );
2464 tty_wait_until_sent(tty, info->closing_wait);
2467 if (info->flags & ASYNC_INITIALIZED)
2468 mgslpc_wait_until_sent(tty, info->timeout);
2470 if (tty->driver->flush_buffer)
2471 tty->driver->flush_buffer(tty);
2473 ldisc_flush_buffer(tty);
2480 if (info->blocked_open) {
2481 if (info->close_delay) {
2482 msleep_interruptible(jiffies_to_msecs(info->close_delay));
2484 wake_up_interruptible(&info->open_wait);
2487 info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
2489 wake_up_interruptible(&info->close_wait);
2492 if (debug_level >= DEBUG_LEVEL_INFO)
2493 printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__,
2494 tty->driver->name, info->count);
2497 /* Wait until the transmitter is empty.
2499 static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
2501 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2502 unsigned long orig_jiffies, char_time;
2507 if (debug_level >= DEBUG_LEVEL_INFO)
2508 printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
2509 __FILE__,__LINE__, info->device_name );
2511 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
2514 if (!(info->flags & ASYNC_INITIALIZED))
2517 orig_jiffies = jiffies;
2519 /* Set check interval to 1/5 of estimated time to
2520 * send a character, and make it at least 1. The check
2521 * interval should also be less than the timeout.
2522 * Note: use tight timings here to satisfy the NIST-PCTS.
2525 if ( info->params.data_rate ) {
2526 char_time = info->timeout/(32 * 5);
2533 char_time = min_t(unsigned long, char_time, timeout);
2535 if (info->params.mode == MGSL_MODE_HDLC) {
2536 while (info->tx_active) {
2537 msleep_interruptible(jiffies_to_msecs(char_time));
2538 if (signal_pending(current))
2540 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2544 while ((info->tx_count || info->tx_active) &&
2546 msleep_interruptible(jiffies_to_msecs(char_time));
2547 if (signal_pending(current))
2549 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2555 if (debug_level >= DEBUG_LEVEL_INFO)
2556 printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
2557 __FILE__,__LINE__, info->device_name );
2560 /* Called by tty_hangup() when a hangup is signaled.
2561 * This is the same as closing all open files for the port.
2563 static void mgslpc_hangup(struct tty_struct *tty)
2565 MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
2567 if (debug_level >= DEBUG_LEVEL_INFO)
2568 printk("%s(%d):mgslpc_hangup(%s)\n",
2569 __FILE__,__LINE__, info->device_name );
2571 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
2574 mgslpc_flush_buffer(tty);
2578 info->flags &= ~ASYNC_NORMAL_ACTIVE;
2581 wake_up_interruptible(&info->open_wait);
2584 /* Block the current process until the specified port
2585 * is ready to be opened.
2587 static int block_til_ready(struct tty_struct *tty, struct file *filp,
2590 DECLARE_WAITQUEUE(wait, current);
2592 bool do_clocal = false;
2593 bool extra_count = false;
2594 unsigned long flags;
2596 if (debug_level >= DEBUG_LEVEL_INFO)
2597 printk("%s(%d):block_til_ready on %s\n",
2598 __FILE__,__LINE__, tty->driver->name );
2600 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
2601 /* nonblock mode is set or port is not enabled */
2602 /* just verify that callout device is not active */
2603 info->flags |= ASYNC_NORMAL_ACTIVE;
2607 if (tty->termios->c_cflag & CLOCAL)
2610 /* Wait for carrier detect and the line to become
2611 * free (i.e., not in use by the callout). While we are in
2612 * this loop, info->count is dropped by one, so that
2613 * mgslpc_close() knows when to free things. We restore it upon
2614 * exit, either normal or abnormal.
2618 add_wait_queue(&info->open_wait, &wait);
2620 if (debug_level >= DEBUG_LEVEL_INFO)
2621 printk("%s(%d):block_til_ready before block on %s count=%d\n",
2622 __FILE__,__LINE__, tty->driver->name, info->count );
2624 spin_lock_irqsave(&info->lock, flags);
2625 if (!tty_hung_up_p(filp)) {
2629 spin_unlock_irqrestore(&info->lock, flags);
2630 info->blocked_open++;
2633 if ((tty->termios->c_cflag & CBAUD)) {
2634 spin_lock_irqsave(&info->lock,flags);
2635 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2637 spin_unlock_irqrestore(&info->lock,flags);
2640 set_current_state(TASK_INTERRUPTIBLE);
2642 if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){
2643 retval = (info->flags & ASYNC_HUP_NOTIFY) ?
2644 -EAGAIN : -ERESTARTSYS;
2648 spin_lock_irqsave(&info->lock,flags);
2650 spin_unlock_irqrestore(&info->lock,flags);
2652 if (!(info->flags & ASYNC_CLOSING) &&
2653 (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) {
2657 if (signal_pending(current)) {
2658 retval = -ERESTARTSYS;
2662 if (debug_level >= DEBUG_LEVEL_INFO)
2663 printk("%s(%d):block_til_ready blocking on %s count=%d\n",
2664 __FILE__,__LINE__, tty->driver->name, info->count );
2669 set_current_state(TASK_RUNNING);
2670 remove_wait_queue(&info->open_wait, &wait);
2674 info->blocked_open--;
2676 if (debug_level >= DEBUG_LEVEL_INFO)
2677 printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
2678 __FILE__,__LINE__, tty->driver->name, info->count );
2681 info->flags |= ASYNC_NORMAL_ACTIVE;
2686 static int mgslpc_open(struct tty_struct *tty, struct file * filp)
2690 unsigned long flags;
2692 /* verify range of specified line number */
2694 if ((line < 0) || (line >= mgslpc_device_count)) {
2695 printk("%s(%d):mgslpc_open with invalid line #%d.\n",
2696 __FILE__,__LINE__,line);
2700 /* find the info structure for the specified line */
2701 info = mgslpc_device_list;
2702 while(info && info->line != line)
2703 info = info->next_device;
2704 if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
2707 tty->driver_data = info;
2710 if (debug_level >= DEBUG_LEVEL_INFO)
2711 printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
2712 __FILE__,__LINE__,tty->driver->name, info->count);
2714 /* If port is closing, signal caller to try again */
2715 if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){
2716 if (info->flags & ASYNC_CLOSING)
2717 interruptible_sleep_on(&info->close_wait);
2718 retval = ((info->flags & ASYNC_HUP_NOTIFY) ?
2719 -EAGAIN : -ERESTARTSYS);
2723 info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
2725 spin_lock_irqsave(&info->netlock, flags);
2726 if (info->netcount) {
2728 spin_unlock_irqrestore(&info->netlock, flags);
2732 spin_unlock_irqrestore(&info->netlock, flags);
2734 if (info->count == 1) {
2735 /* 1st open on this device, init hardware */
2736 retval = startup(info);
2741 retval = block_til_ready(tty, filp, info);
2743 if (debug_level >= DEBUG_LEVEL_INFO)
2744 printk("%s(%d):block_til_ready(%s) returned %d\n",
2745 __FILE__,__LINE__, info->device_name, retval);
2749 if (debug_level >= DEBUG_LEVEL_INFO)
2750 printk("%s(%d):mgslpc_open(%s) success\n",
2751 __FILE__,__LINE__, info->device_name);
2756 if (tty->count == 1)
2757 info->tty = NULL; /* tty layer will release tty struct */
2766 * /proc fs routines....
2769 static inline int line_info(char *buf, MGSLPC_INFO *info)
2773 unsigned long flags;
2775 ret = sprintf(buf, "%s:io:%04X irq:%d",
2776 info->device_name, info->io_base, info->irq_level);
2778 /* output current serial signal states */
2779 spin_lock_irqsave(&info->lock,flags);
2781 spin_unlock_irqrestore(&info->lock,flags);
2785 if (info->serial_signals & SerialSignal_RTS)
2786 strcat(stat_buf, "|RTS");
2787 if (info->serial_signals & SerialSignal_CTS)
2788 strcat(stat_buf, "|CTS");
2789 if (info->serial_signals & SerialSignal_DTR)
2790 strcat(stat_buf, "|DTR");
2791 if (info->serial_signals & SerialSignal_DSR)
2792 strcat(stat_buf, "|DSR");
2793 if (info->serial_signals & SerialSignal_DCD)
2794 strcat(stat_buf, "|CD");
2795 if (info->serial_signals & SerialSignal_RI)
2796 strcat(stat_buf, "|RI");
2798 if (info->params.mode == MGSL_MODE_HDLC) {
2799 ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
2800 info->icount.txok, info->icount.rxok);
2801 if (info->icount.txunder)
2802 ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
2803 if (info->icount.txabort)
2804 ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
2805 if (info->icount.rxshort)
2806 ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
2807 if (info->icount.rxlong)
2808 ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
2809 if (info->icount.rxover)
2810 ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
2811 if (info->icount.rxcrc)
2812 ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
2814 ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
2815 info->icount.tx, info->icount.rx);
2816 if (info->icount.frame)
2817 ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
2818 if (info->icount.parity)
2819 ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
2820 if (info->icount.brk)
2821 ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
2822 if (info->icount.overrun)
2823 ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
2826 /* Append serial signal status to end */
2827 ret += sprintf(buf+ret, " %s\n", stat_buf+1);
2829 ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
2830 info->tx_active,info->bh_requested,info->bh_running,
2836 /* Called to print information about devices
2838 static int mgslpc_read_proc(char *page, char **start, off_t off, int count,
2839 int *eof, void *data)
2845 len += sprintf(page, "synclink driver:%s\n", driver_version);
2847 info = mgslpc_device_list;
2849 l = line_info(page + len, info);
2851 if (len+begin > off+count)
2853 if (len+begin < off) {
2857 info = info->next_device;
2862 if (off >= len+begin)
2864 *start = page + (off-begin);
2865 return ((count < begin+len-off) ? count : begin+len-off);
2868 static int rx_alloc_buffers(MGSLPC_INFO *info)
2870 /* each buffer has header and data */
2871 info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
2873 /* calculate total allocation size for 8 buffers */
2874 info->rx_buf_total_size = info->rx_buf_size * 8;
2876 /* limit total allocated memory */
2877 if (info->rx_buf_total_size > 0x10000)
2878 info->rx_buf_total_size = 0x10000;
2880 /* calculate number of buffers */
2881 info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
2883 info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
2884 if (info->rx_buf == NULL)
2887 rx_reset_buffers(info);
2891 static void rx_free_buffers(MGSLPC_INFO *info)
2893 kfree(info->rx_buf);
2894 info->rx_buf = NULL;
2897 static int claim_resources(MGSLPC_INFO *info)
2899 if (rx_alloc_buffers(info) < 0 ) {
2900 printk( "Cant allocate rx buffer %s\n", info->device_name);
2901 release_resources(info);
2907 static void release_resources(MGSLPC_INFO *info)
2909 if (debug_level >= DEBUG_LEVEL_INFO)
2910 printk("release_resources(%s)\n", info->device_name);
2911 rx_free_buffers(info);
2914 /* Add the specified device instance data structure to the
2915 * global linked list of devices and increment the device count.
2917 * Arguments: info pointer to device instance data
2919 static void mgslpc_add_device(MGSLPC_INFO *info)
2921 info->next_device = NULL;
2922 info->line = mgslpc_device_count;
2923 sprintf(info->device_name,"ttySLP%d",info->line);
2925 if (info->line < MAX_DEVICE_COUNT) {
2926 if (maxframe[info->line])
2927 info->max_frame_size = maxframe[info->line];
2928 info->dosyncppp = dosyncppp[info->line];
2931 mgslpc_device_count++;
2933 if (!mgslpc_device_list)
2934 mgslpc_device_list = info;
2936 MGSLPC_INFO *current_dev = mgslpc_device_list;
2937 while( current_dev->next_device )
2938 current_dev = current_dev->next_device;
2939 current_dev->next_device = info;
2942 if (info->max_frame_size < 4096)
2943 info->max_frame_size = 4096;
2944 else if (info->max_frame_size > 65535)
2945 info->max_frame_size = 65535;
2947 printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n",
2948 info->device_name, info->io_base, info->irq_level);
2950 #if SYNCLINK_GENERIC_HDLC
2955 static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
2957 MGSLPC_INFO *info = mgslpc_device_list;
2958 MGSLPC_INFO *last = NULL;
2961 if (info == remove_info) {
2963 last->next_device = info->next_device;
2965 mgslpc_device_list = info->next_device;
2966 #if SYNCLINK_GENERIC_HDLC
2969 release_resources(info);
2971 mgslpc_device_count--;
2975 info = info->next_device;
2979 static struct pcmcia_device_id mgslpc_ids[] = {
2980 PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
2983 MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
2985 static struct pcmcia_driver mgslpc_driver = {
2986 .owner = THIS_MODULE,
2988 .name = "synclink_cs",
2990 .probe = mgslpc_probe,
2991 .remove = mgslpc_detach,
2992 .id_table = mgslpc_ids,
2993 .suspend = mgslpc_suspend,
2994 .resume = mgslpc_resume,
2997 static const struct tty_operations mgslpc_ops = {
2998 .open = mgslpc_open,
2999 .close = mgslpc_close,
3000 .write = mgslpc_write,
3001 .put_char = mgslpc_put_char,
3002 .flush_chars = mgslpc_flush_chars,
3003 .write_room = mgslpc_write_room,
3004 .chars_in_buffer = mgslpc_chars_in_buffer,
3005 .flush_buffer = mgslpc_flush_buffer,
3006 .ioctl = mgslpc_ioctl,
3007 .throttle = mgslpc_throttle,
3008 .unthrottle = mgslpc_unthrottle,
3009 .send_xchar = mgslpc_send_xchar,
3010 .break_ctl = mgslpc_break,
3011 .wait_until_sent = mgslpc_wait_until_sent,
3012 .read_proc = mgslpc_read_proc,
3013 .set_termios = mgslpc_set_termios,
3015 .start = tx_release,
3016 .hangup = mgslpc_hangup,
3017 .tiocmget = tiocmget,
3018 .tiocmset = tiocmset,
3021 static void synclink_cs_cleanup(void)
3025 printk("Unloading %s: version %s\n", driver_name, driver_version);
3027 while(mgslpc_device_list)
3028 mgslpc_remove_device(mgslpc_device_list);
3030 if (serial_driver) {
3031 if ((rc = tty_unregister_driver(serial_driver)))
3032 printk("%s(%d) failed to unregister tty driver err=%d\n",
3033 __FILE__,__LINE__,rc);
3034 put_tty_driver(serial_driver);
3037 pcmcia_unregister_driver(&mgslpc_driver);
3040 static int __init synclink_cs_init(void)
3044 if (break_on_load) {
3045 mgslpc_get_text_ptr();
3049 printk("%s %s\n", driver_name, driver_version);
3051 if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0)
3054 serial_driver = alloc_tty_driver(MAX_DEVICE_COUNT);
3055 if (!serial_driver) {
3060 /* Initialize the tty_driver structure */
3062 serial_driver->owner = THIS_MODULE;
3063 serial_driver->driver_name = "synclink_cs";
3064 serial_driver->name = "ttySLP";
3065 serial_driver->major = ttymajor;
3066 serial_driver->minor_start = 64;
3067 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3068 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3069 serial_driver->init_termios = tty_std_termios;
3070 serial_driver->init_termios.c_cflag =
3071 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3072 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3073 tty_set_operations(serial_driver, &mgslpc_ops);
3075 if ((rc = tty_register_driver(serial_driver)) < 0) {
3076 printk("%s(%d):Couldn't register serial driver\n",
3078 put_tty_driver(serial_driver);
3079 serial_driver = NULL;
3083 printk("%s %s, tty major#%d\n",
3084 driver_name, driver_version,
3085 serial_driver->major);
3090 synclink_cs_cleanup();
3094 static void __exit synclink_cs_exit(void)
3096 synclink_cs_cleanup();
3099 module_init(synclink_cs_init);
3100 module_exit(synclink_cs_exit);
3102 static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
3107 /* note:standard BRG mode is broken in V3.2 chip
3108 * so enhanced mode is always used
3116 for (M = 1; N > 64 && M < 16; M++)
3122 * BGR[7..0] contained in BGR register
3123 * BGR[9..8] contained in CCR2[7..6]
3124 * divisor = (N+1)*2^M
3126 * Note: M *must* not be zero (causes asymetric duty cycle)
3128 write_reg(info, (unsigned char) (channel + BGR),
3129 (unsigned char) ((M << 6) + N));
3130 val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
3131 val |= ((M << 4) & 0xc0);
3132 write_reg(info, (unsigned char) (channel + CCR2), val);
3136 /* Enabled the AUX clock output at the specified frequency.
3138 static void enable_auxclk(MGSLPC_INFO *info)
3144 * 07..06 MDS[1..0] 10 = transparent HDLC mode
3145 * 05 ADM Address Mode, 0 = no addr recognition
3146 * 04 TMD Timer Mode, 0 = external
3147 * 03 RAC Receiver Active, 0 = inactive
3148 * 02 RTS 0=RTS active during xmit, 1=RTS always active
3149 * 01 TRS Timer Resolution, 1=512
3150 * 00 TLP Test Loop, 0 = no loop
3156 /* channel B RTS is used to enable AUXCLK driver on SP505 */
3157 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3159 write_reg(info, CHB + MODE, val);
3163 * 07 PU Power Up, 1=active, 0=power down
3164 * 06 MCE Master Clock Enable, 1=enabled
3166 * 04..02 SC[2..0] Encoding
3167 * 01..00 SM[1..0] Serial Mode, 00=HDLC
3171 write_reg(info, CHB + CCR0, 0xc0);
3175 * 07 SFLG Shared Flag, 0 = disable shared flags
3176 * 06 GALP Go Active On Loop, 0 = not used
3177 * 05 GLP Go On Loop, 0 = not used
3178 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3179 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
3180 * 02..00 CM[2..0] Clock Mode
3184 write_reg(info, CHB + CCR1, 0x17);
3188 * 07..06 BGR[9..8] Baud rate bits 9..8
3189 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3190 * 04 SSEL Clock source select, 1=submode b
3191 * 03 TOE 0=TxCLK is input, 1=TxCLK is output
3192 * 02 RWX Read/Write Exchange 0=disabled
3193 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
3194 * 00 DIV, data inversion 0=disabled, 1=enabled
3198 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3199 write_reg(info, CHB + CCR2, 0x38);
3201 write_reg(info, CHB + CCR2, 0x30);
3205 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3206 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3207 * 05 TST1 Test Pin, 0=normal operation
3208 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3209 * 03..02 Reserved, must be 0
3210 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3214 write_reg(info, CHB + CCR4, 0x50);
3216 /* if auxclk not enabled, set internal BRG so
3217 * CTS transitions can be detected (requires TxC)
3219 if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
3220 mgslpc_set_rate(info, CHB, info->params.clock_speed);
3222 mgslpc_set_rate(info, CHB, 921600);
3225 static void loopback_enable(MGSLPC_INFO *info)
3229 /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
3230 val = read_reg(info, CHA + CCR1) | (BIT2 + BIT1 + BIT0);
3231 write_reg(info, CHA + CCR1, val);
3233 /* CCR2:04 SSEL Clock source select, 1=submode b */
3234 val = read_reg(info, CHA + CCR2) | (BIT4 + BIT5);
3235 write_reg(info, CHA + CCR2, val);
3237 /* set LinkSpeed if available, otherwise default to 2Mbps */
3238 if (info->params.clock_speed)
3239 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3241 mgslpc_set_rate(info, CHA, 1843200);
3243 /* MODE:00 TLP Test Loop, 1=loopback enabled */
3244 val = read_reg(info, CHA + MODE) | BIT0;
3245 write_reg(info, CHA + MODE, val);
3248 static void hdlc_mode(MGSLPC_INFO *info)
3251 unsigned char clkmode, clksubmode;
3253 /* disable all interrupts */
3254 irq_disable(info, CHA, 0xffff);
3255 irq_disable(info, CHB, 0xffff);
3256 port_irq_disable(info, 0xff);
3258 /* assume clock mode 0a, rcv=RxC xmt=TxC */
3259 clkmode = clksubmode = 0;
3260 if (info->params.flags & HDLC_FLAG_RXC_DPLL
3261 && info->params.flags & HDLC_FLAG_TXC_DPLL) {
3262 /* clock mode 7a, rcv = DPLL, xmt = DPLL */
3264 } else if (info->params.flags & HDLC_FLAG_RXC_BRG
3265 && info->params.flags & HDLC_FLAG_TXC_BRG) {
3266 /* clock mode 7b, rcv = BRG, xmt = BRG */
3269 } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
3270 if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3271 /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
3275 /* clock mode 6a, rcv = DPLL, xmt = TxC */
3278 } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
3279 /* clock mode 0b, rcv = RxC, xmt = BRG */
3285 * 07..06 MDS[1..0] 10 = transparent HDLC mode
3286 * 05 ADM Address Mode, 0 = no addr recognition
3287 * 04 TMD Timer Mode, 0 = external
3288 * 03 RAC Receiver Active, 0 = inactive
3289 * 02 RTS 0=RTS active during xmit, 1=RTS always active
3290 * 01 TRS Timer Resolution, 1=512
3291 * 00 TLP Test Loop, 0 = no loop
3296 if (info->params.loopback)
3299 /* preserve RTS state */
3300 if (info->serial_signals & SerialSignal_RTS)
3302 write_reg(info, CHA + MODE, val);
3306 * 07 PU Power Up, 1=active, 0=power down
3307 * 06 MCE Master Clock Enable, 1=enabled
3309 * 04..02 SC[2..0] Encoding
3310 * 01..00 SM[1..0] Serial Mode, 00=HDLC
3315 switch (info->params.encoding)
3317 case HDLC_ENCODING_NRZI:
3320 case HDLC_ENCODING_BIPHASE_SPACE:
3323 case HDLC_ENCODING_BIPHASE_MARK:
3326 case HDLC_ENCODING_BIPHASE_LEVEL:
3328 break; // Manchester
3330 write_reg(info, CHA + CCR0, val);
3334 * 07 SFLG Shared Flag, 0 = disable shared flags
3335 * 06 GALP Go Active On Loop, 0 = not used
3336 * 05 GLP Go On Loop, 0 = not used
3337 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3338 * 03 ITF Interframe Time Fill, 0=mark, 1=flag
3339 * 02..00 CM[2..0] Clock Mode
3343 val = 0x10 + clkmode;
3344 write_reg(info, CHA + CCR1, val);
3348 * 07..06 BGR[9..8] Baud rate bits 9..8
3349 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3350 * 04 SSEL Clock source select, 1=submode b
3351 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3352 * 02 RWX Read/Write Exchange 0=disabled
3353 * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
3354 * 00 DIV, data inversion 0=disabled, 1=enabled
3359 if (clkmode == 2 || clkmode == 3 || clkmode == 6
3360 || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
3364 if (info->params.crc_type == HDLC_CRC_32_CCITT)
3366 if (info->params.encoding == HDLC_ENCODING_NRZB)
3368 write_reg(info, CHA + CCR2, val);
3372 * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
3373 * 05 EPT Enable preamble transmission, 1=enabled
3374 * 04 RADD Receive address pushed to FIFO, 0=disabled
3375 * 03 CRL CRC Reset Level, 0=FFFF
3376 * 02 RCRC Rx CRC 0=On 1=Off
3377 * 01 TCRC Tx CRC 0=On 1=Off
3378 * 00 PSD DPLL Phase Shift Disable
3383 if (info->params.crc_type == HDLC_CRC_NONE)
3385 if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
3387 switch (info->params.preamble_length)
3389 case HDLC_PREAMBLE_LENGTH_16BITS:
3392 case HDLC_PREAMBLE_LENGTH_32BITS:
3395 case HDLC_PREAMBLE_LENGTH_64BITS:
3399 write_reg(info, CHA + CCR3, val);
3401 /* PRE - Preamble pattern */
3403 switch (info->params.preamble)
3405 case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
3406 case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
3407 case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
3408 case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
3410 write_reg(info, CHA + PRE, val);
3414 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3415 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3416 * 05 TST1 Test Pin, 0=normal operation
3417 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3418 * 03..02 Reserved, must be 0
3419 * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
3424 write_reg(info, CHA + CCR4, val);
3425 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
3426 mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
3428 mgslpc_set_rate(info, CHA, info->params.clock_speed);
3430 /* RLCR Receive length check register
3432 * 7 1=enable receive length check
3433 * 6..0 Max frame length = (RL + 1) * 32
3435 write_reg(info, CHA + RLCR, 0);
3437 /* XBCH Transmit Byte Count High
3439 * 07 DMA mode, 0 = interrupt driven
3440 * 06 NRM, 0=ABM (ignored)
3441 * 05 CAS Carrier Auto Start
3442 * 04 XC Transmit Continuously (ignored)
3443 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3448 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3450 write_reg(info, CHA + XBCH, val);
3451 enable_auxclk(info);
3452 if (info->params.loopback || info->testing_irq)
3453 loopback_enable(info);
3454 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3456 irq_enable(info, CHB, IRQ_CTS);
3457 /* PVR[3] 1=AUTO CTS active */
3458 set_reg_bits(info, CHA + PVR, BIT3);
3460 clear_reg_bits(info, CHA + PVR, BIT3);
3462 irq_enable(info, CHA,
3463 IRQ_RXEOM + IRQ_RXFIFO + IRQ_ALLSENT +
3464 IRQ_UNDERRUN + IRQ_TXFIFO);
3465 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3466 wait_command_complete(info, CHA);
3467 read_reg16(info, CHA + ISR); /* clear pending IRQs */
3469 /* Master clock mode enabled above to allow reset commands
3470 * to complete even if no data clocks are present.
3472 * Disable master clock mode for normal communications because
3473 * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
3474 * IRQ when in master clock mode.
3476 * Leave master clock mode enabled for IRQ test because the
3477 * timer IRQ used by the test can only happen in master clock mode.
3479 if (!info->testing_irq)
3480 clear_reg_bits(info, CHA + CCR0, BIT6);
3488 static void rx_stop(MGSLPC_INFO *info)
3490 if (debug_level >= DEBUG_LEVEL_ISR)
3491 printk("%s(%d):rx_stop(%s)\n",
3492 __FILE__,__LINE__, info->device_name );
3494 /* MODE:03 RAC Receiver Active, 0=inactive */
3495 clear_reg_bits(info, CHA + MODE, BIT3);
3497 info->rx_enabled = false;
3498 info->rx_overflow = false;
3501 static void rx_start(MGSLPC_INFO *info)
3503 if (debug_level >= DEBUG_LEVEL_ISR)
3504 printk("%s(%d):rx_start(%s)\n",
3505 __FILE__,__LINE__, info->device_name );
3507 rx_reset_buffers(info);
3508 info->rx_enabled = false;
3509 info->rx_overflow = false;
3511 /* MODE:03 RAC Receiver Active, 1=active */
3512 set_reg_bits(info, CHA + MODE, BIT3);
3514 info->rx_enabled = true;
3517 static void tx_start(MGSLPC_INFO *info)
3519 if (debug_level >= DEBUG_LEVEL_ISR)
3520 printk("%s(%d):tx_start(%s)\n",
3521 __FILE__,__LINE__, info->device_name );
3523 if (info->tx_count) {
3524 /* If auto RTS enabled and RTS is inactive, then assert */
3525 /* RTS and set a flag indicating that the driver should */
3526 /* negate RTS when the transmission completes. */
3527 info->drop_rts_on_tx_done = false;
3529 if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
3531 if (!(info->serial_signals & SerialSignal_RTS)) {
3532 info->serial_signals |= SerialSignal_RTS;
3534 info->drop_rts_on_tx_done = true;
3538 if (info->params.mode == MGSL_MODE_ASYNC) {
3539 if (!info->tx_active) {
3540 info->tx_active = true;
3544 info->tx_active = true;
3546 mod_timer(&info->tx_timer, jiffies +
3547 msecs_to_jiffies(5000));
3551 if (!info->tx_enabled)
3552 info->tx_enabled = true;
3555 static void tx_stop(MGSLPC_INFO *info)
3557 if (debug_level >= DEBUG_LEVEL_ISR)
3558 printk("%s(%d):tx_stop(%s)\n",
3559 __FILE__,__LINE__, info->device_name );
3561 del_timer(&info->tx_timer);
3563 info->tx_enabled = false;
3564 info->tx_active = false;
3567 /* Reset the adapter to a known state and prepare it for further use.
3569 static void reset_device(MGSLPC_INFO *info)
3571 /* power up both channels (set BIT7) */
3572 write_reg(info, CHA + CCR0, 0x80);
3573 write_reg(info, CHB + CCR0, 0x80);
3574 write_reg(info, CHA + MODE, 0);
3575 write_reg(info, CHB + MODE, 0);
3577 /* disable all interrupts */
3578 irq_disable(info, CHA, 0xffff);
3579 irq_disable(info, CHB, 0xffff);
3580 port_irq_disable(info, 0xff);
3582 /* PCR Port Configuration Register
3584 * 07..04 DEC[3..0] Serial I/F select outputs
3585 * 03 output, 1=AUTO CTS control enabled
3586 * 02 RI Ring Indicator input 0=active
3587 * 01 DSR input 0=active
3588 * 00 DTR output 0=active
3592 write_reg(info, PCR, 0x06);
3594 /* PVR Port Value Register
3596 * 07..04 DEC[3..0] Serial I/F select (0000=disabled)
3597 * 03 AUTO CTS output 1=enabled
3598 * 02 RI Ring Indicator input
3600 * 00 DTR output (1=inactive)
3604 // write_reg(info, PVR, PVR_DTR);
3606 /* IPC Interrupt Port Configuration
3608 * 07 VIS 1=Masked interrupts visible
3609 * 06..05 Reserved, 0
3610 * 04..03 SLA Slave address, 00 ignored
3611 * 02 CASM Cascading Mode, 1=daisy chain
3612 * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
3616 write_reg(info, IPC, 0x05);
3619 static void async_mode(MGSLPC_INFO *info)
3623 /* disable all interrupts */
3624 irq_disable(info, CHA, 0xffff);
3625 irq_disable(info, CHB, 0xffff);
3626 port_irq_disable(info, 0xff);
3631 * 06 FRTS RTS State, 0=active
3632 * 05 FCTS Flow Control on CTS
3633 * 04 FLON Flow Control Enable
3634 * 03 RAC Receiver Active, 0 = inactive
3635 * 02 RTS 0=Auto RTS, 1=manual RTS
3636 * 01 TRS Timer Resolution, 1=512
3637 * 00 TLP Test Loop, 0 = no loop
3642 if (info->params.loopback)
3645 /* preserve RTS state */
3646 if (!(info->serial_signals & SerialSignal_RTS))
3648 write_reg(info, CHA + MODE, val);
3652 * 07 PU Power Up, 1=active, 0=power down
3653 * 06 MCE Master Clock Enable, 1=enabled
3655 * 04..02 SC[2..0] Encoding, 000=NRZ
3656 * 01..00 SM[1..0] Serial Mode, 11=Async
3660 write_reg(info, CHA + CCR0, 0x83);
3664 * 07..05 Reserved, 0
3665 * 04 ODS Output Driver Select, 1=TxD is push-pull output
3666 * 03 BCR Bit Clock Rate, 1=16x
3667 * 02..00 CM[2..0] Clock Mode, 111=BRG
3671 write_reg(info, CHA + CCR1, 0x1f);
3675 * 07..06 BGR[9..8] Baud rate bits 9..8
3676 * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
3677 * 04 SSEL Clock source select, 1=submode b
3678 * 03 TOE 0=TxCLK is input, 0=TxCLK is input
3679 * 02 RWX Read/Write Exchange 0=disabled
3681 * 00 DIV, data inversion 0=disabled, 1=enabled
3685 write_reg(info, CHA + CCR2, 0x10);
3689 * 07..01 Reserved, 0
3690 * 00 PSD DPLL Phase Shift Disable
3694 write_reg(info, CHA + CCR3, 0);
3698 * 07 MCK4 Master Clock Divide by 4, 1=enabled
3699 * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
3700 * 05 TST1 Test Pin, 0=normal operation
3701 * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
3702 * 03..00 Reserved, must be 0
3706 write_reg(info, CHA + CCR4, 0x50);
3707 mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
3712 * 06 XBRK transmit break, 0=normal operation
3713 * 05 Stop bits (0=1, 1=2)
3714 * 04..03 PAR[1..0] Parity (01=odd, 10=even)
3715 * 02 PAREN Parity Enable
3716 * 01..00 CHL[1..0] Character Length (00=8, 01=7)
3720 if (info->params.data_bits != 8)
3721 val |= BIT0; /* 7 bits */
3722 if (info->params.stop_bits != 1)
3724 if (info->params.parity != ASYNC_PARITY_NONE)
3726 val |= BIT2; /* Parity enable */
3727 if (info->params.parity == ASYNC_PARITY_ODD)
3732 write_reg(info, CHA + DAFO, val);
3734 /* RFC Rx FIFO Control
3737 * 06 DPS, 1=parity bit not stored in data byte
3738 * 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
3739 * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
3740 * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
3742 * 00 TCDE Terminate Char Detect Enable, 0=disabled
3746 write_reg(info, CHA + RFC, 0x5c);
3748 /* RLCR Receive length check register
3750 * Max frame length = (RL + 1) * 32
3752 write_reg(info, CHA + RLCR, 0);
3754 /* XBCH Transmit Byte Count High
3756 * 07 DMA mode, 0 = interrupt driven
3757 * 06 NRM, 0=ABM (ignored)
3758 * 05 CAS Carrier Auto Start
3759 * 04 XC Transmit Continuously (ignored)
3760 * 03..00 XBC[10..8] Transmit byte count bits 10..8
3765 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
3767 write_reg(info, CHA + XBCH, val);
3768 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
3769 irq_enable(info, CHA, IRQ_CTS);
3771 /* MODE:03 RAC Receiver Active, 1=active */
3772 set_reg_bits(info, CHA + MODE, BIT3);
3773 enable_auxclk(info);
3774 if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
3775 irq_enable(info, CHB, IRQ_CTS);
3776 /* PVR[3] 1=AUTO CTS active */
3777 set_reg_bits(info, CHA + PVR, BIT3);
3779 clear_reg_bits(info, CHA + PVR, BIT3);
3780 irq_enable(info, CHA,
3781 IRQ_RXEOM + IRQ_RXFIFO + IRQ_BREAK_ON + IRQ_RXTIME +
3782 IRQ_ALLSENT + IRQ_TXFIFO);
3783 issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
3784 wait_command_complete(info, CHA);
3785 read_reg16(info, CHA + ISR); /* clear pending IRQs */
3788 /* Set the HDLC idle mode for the transmitter.
3790 static void tx_set_idle(MGSLPC_INFO *info)
3792 /* Note: ESCC2 only supports flags and one idle modes */
3793 if (info->idle_mode == HDLC_TXIDLE_FLAGS)
3794 set_reg_bits(info, CHA + CCR1, BIT3);
3796 clear_reg_bits(info, CHA + CCR1, BIT3);
3799 /* get state of the V24 status (input) signals.
3801 static void get_signals(MGSLPC_INFO *info)
3803 unsigned char status = 0;
3805 /* preserve DTR and RTS */
3806 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
3808 if (read_reg(info, CHB + VSTR) & BIT7)
3809 info->serial_signals |= SerialSignal_DCD;
3810 if (read_reg(info, CHB + STAR) & BIT1)
3811 info->serial_signals |= SerialSignal_CTS;
3813 status = read_reg(info, CHA + PVR);
3814 if (!(status & PVR_RI))
3815 info->serial_signals |= SerialSignal_RI;
3816 if (!(status & PVR_DSR))
3817 info->serial_signals |= SerialSignal_DSR;
3820 /* Set the state of DTR and RTS based on contents of
3821 * serial_signals member of device extension.
3823 static void set_signals(MGSLPC_INFO *info)
3827 val = read_reg(info, CHA + MODE);
3828 if (info->params.mode == MGSL_MODE_ASYNC) {
3829 if (info->serial_signals & SerialSignal_RTS)
3834 if (info->serial_signals & SerialSignal_RTS)
3839 write_reg(info, CHA + MODE, val);
3841 if (info->serial_signals & SerialSignal_DTR)
3842 clear_reg_bits(info, CHA + PVR, PVR_DTR);
3844 set_reg_bits(info, CHA + PVR, PVR_DTR);
3847 static void rx_reset_buffers(MGSLPC_INFO *info)
3854 info->rx_frame_count = 0;
3855 for (i=0 ; i < info->rx_buf_count ; i++) {
3856 buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
3857 buf->status = buf->count = 0;
3861 /* Attempt to return a received HDLC frame
3862 * Only frames received without errors are returned.
3864 * Returns true if frame returned, otherwise false
3866 static bool rx_get_frame(MGSLPC_INFO *info)
3868 unsigned short status;
3870 unsigned int framesize = 0;
3871 unsigned long flags;
3872 struct tty_struct *tty = info->tty;
3873 bool return_frame = false;
3875 if (info->rx_frame_count == 0)
3878 buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
3880 status = buf->status;
3882 /* 07 VFR 1=valid frame
3883 * 06 RDO 1=data overrun
3884 * 05 CRC 1=OK, 0=error
3885 * 04 RAB 1=frame aborted
3887 if ((status & 0xf0) != 0xA0) {
3888 if (!(status & BIT7) || (status & BIT4))
3889 info->icount.rxabort++;
3890 else if (status & BIT6)
3891 info->icount.rxover++;
3892 else if (!(status & BIT5)) {
3893 info->icount.rxcrc++;
3894 if (info->params.crc_type & HDLC_CRC_RETURN_EX)
3895 return_frame = true;
3898 #if SYNCLINK_GENERIC_HDLC
3900 struct net_device_stats *stats = hdlc_stats(info->netdev);
3902 stats->rx_frame_errors++;
3906 return_frame = true;
3909 framesize = buf->count;
3911 if (debug_level >= DEBUG_LEVEL_BH)
3912 printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
3913 __FILE__,__LINE__,info->device_name,status,framesize);
3915 if (debug_level >= DEBUG_LEVEL_DATA)
3916 trace_block(info, buf->data, framesize, 0);
3919 if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
3920 framesize+1 > info->max_frame_size) ||
3921 framesize > info->max_frame_size)
3922 info->icount.rxlong++;
3925 info->icount.rxok++;
3927 if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
3928 *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
3932 #if SYNCLINK_GENERIC_HDLC
3934 hdlcdev_rx(info, buf->data, framesize);
3937 ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
3941 spin_lock_irqsave(&info->lock,flags);
3942 buf->status = buf->count = 0;
3943 info->rx_frame_count--;
3945 if (info->rx_get >= info->rx_buf_count)
3947 spin_unlock_irqrestore(&info->lock,flags);
3952 static bool register_test(MGSLPC_INFO *info)
3954 static unsigned char patterns[] =
3955 { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
3956 static unsigned int count = ARRAY_SIZE(patterns);
3959 unsigned long flags;
3961 spin_lock_irqsave(&info->lock,flags);
3964 for (i = 0; i < count; i++) {
3965 write_reg(info, XAD1, patterns[i]);
3966 write_reg(info, XAD2, patterns[(i + 1) % count]);
3967 if ((read_reg(info, XAD1) != patterns[i]) ||
3968 (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
3974 spin_unlock_irqrestore(&info->lock,flags);
3978 static bool irq_test(MGSLPC_INFO *info)
3980 unsigned long end_time;
3981 unsigned long flags;
3983 spin_lock_irqsave(&info->lock,flags);
3986 info->testing_irq = true;
3989 info->irq_occurred = false;
3991 /* init hdlc mode */
3993 irq_enable(info, CHA, IRQ_TIMER);
3994 write_reg(info, CHA + TIMR, 0); /* 512 cycles */
3995 issue_command(info, CHA, CMD_START_TIMER);
3997 spin_unlock_irqrestore(&info->lock,flags);
4000 while(end_time-- && !info->irq_occurred) {
4001 msleep_interruptible(10);
4004 info->testing_irq = false;
4006 spin_lock_irqsave(&info->lock,flags);
4008 spin_unlock_irqrestore(&info->lock,flags);
4010 return info->irq_occurred;
4013 static int adapter_test(MGSLPC_INFO *info)
4015 if (!register_test(info)) {
4016 info->init_error = DiagStatus_AddressFailure;
4017 printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
4018 __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) );
4022 if (!irq_test(info)) {
4023 info->init_error = DiagStatus_IrqFailure;
4024 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
4025 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
4029 if (debug_level >= DEBUG_LEVEL_INFO)
4030 printk("%s(%d):device %s passed diagnostics\n",
4031 __FILE__,__LINE__,info->device_name);
4035 static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
4040 printk("%s tx data:\n",info->device_name);
4042 printk("%s rx data:\n",info->device_name);
4050 for(i=0;i<linecount;i++)
4051 printk("%02X ",(unsigned char)data[i]);
4054 for(i=0;i<linecount;i++) {
4055 if (data[i]>=040 && data[i]<=0176)
4056 printk("%c",data[i]);
4067 /* HDLC frame time out
4068 * update stats and do tx completion processing
4070 static void tx_timeout(unsigned long context)
4072 MGSLPC_INFO *info = (MGSLPC_INFO*)context;
4073 unsigned long flags;
4075 if ( debug_level >= DEBUG_LEVEL_INFO )
4076 printk( "%s(%d):tx_timeout(%s)\n",
4077 __FILE__,__LINE__,info->device_name);
4078 if(info->tx_active &&
4079 info->params.mode == MGSL_MODE_HDLC) {
4080 info->icount.txtimeout++;
4082 spin_lock_irqsave(&info->lock,flags);
4083 info->tx_active = false;
4084 info->tx_count = info->tx_put = info->tx_get = 0;
4086 spin_unlock_irqrestore(&info->lock,flags);
4088 #if SYNCLINK_GENERIC_HDLC
4090 hdlcdev_tx_done(info);
4096 #if SYNCLINK_GENERIC_HDLC
4099 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
4100 * set encoding and frame check sequence (FCS) options
4102 * dev pointer to network device structure
4103 * encoding serial encoding setting
4104 * parity FCS setting
4106 * returns 0 if success, otherwise error code
4108 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
4109 unsigned short parity)
4111 MGSLPC_INFO *info = dev_to_port(dev);
4112 unsigned char new_encoding;
4113 unsigned short new_crctype;
4115 /* return error if TTY interface open */
4121 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
4122 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
4123 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
4124 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
4125 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
4126 default: return -EINVAL;
4131 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
4132 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
4133 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
4134 default: return -EINVAL;
4137 info->params.encoding = new_encoding;
4138 info->params.crc_type = new_crctype;
4140 /* if network interface up, reprogram hardware */
4142 mgslpc_program_hw(info);
4148 * called by generic HDLC layer to send frame
4150 * skb socket buffer containing HDLC frame
4151 * dev pointer to network device structure
4153 * returns 0 if success, otherwise error code
4155 static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev)
4157 MGSLPC_INFO *info = dev_to_port(dev);
4158 struct net_device_stats *stats = hdlc_stats(dev);
4159 unsigned long flags;
4161 if (debug_level >= DEBUG_LEVEL_INFO)
4162 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
4164 /* stop sending until this frame completes */
4165 netif_stop_queue(dev);
4167 /* copy data to device buffers */
4168 skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
4170 info->tx_put = info->tx_count = skb->len;
4172 /* update network statistics */
4173 stats->tx_packets++;
4174 stats->tx_bytes += skb->len;
4176 /* done with socket buffer, so free it */
4179 /* save start time for transmit timeout detection */
4180 dev->trans_start = jiffies;
4182 /* start hardware transmitter if necessary */
4183 spin_lock_irqsave(&info->lock,flags);
4184 if (!info->tx_active)
4186 spin_unlock_irqrestore(&info->lock,flags);
4192 * called by network layer when interface enabled
4193 * claim resources and initialize hardware
4195 * dev pointer to network device structure
4197 * returns 0 if success, otherwise error code
4199 static int hdlcdev_open(struct net_device *dev)
4201 MGSLPC_INFO *info = dev_to_port(dev);
4203 unsigned long flags;
4205 if (debug_level >= DEBUG_LEVEL_INFO)
4206 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
4208 /* generic HDLC layer open processing */
4209 if ((rc = hdlc_open(dev)))
4212 /* arbitrate between network and tty opens */
4213 spin_lock_irqsave(&info->netlock, flags);
4214 if (info->count != 0 || info->netcount != 0) {
4215 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
4216 spin_unlock_irqrestore(&info->netlock, flags);
4220 spin_unlock_irqrestore(&info->netlock, flags);
4222 /* claim resources and init adapter */
4223 if ((rc = startup(info)) != 0) {
4224 spin_lock_irqsave(&info->netlock, flags);
4226 spin_unlock_irqrestore(&info->netlock, flags);
4230 /* assert DTR and RTS, apply hardware settings */
4231 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
4232 mgslpc_program_hw(info);
4234 /* enable network layer transmit */
4235 dev->trans_start = jiffies;
4236 netif_start_queue(dev);
4238 /* inform generic HDLC layer of current DCD status */
4239 spin_lock_irqsave(&info->lock, flags);
4241 spin_unlock_irqrestore(&info->lock, flags);
4242 if (info->serial_signals & SerialSignal_DCD)
4243 netif_carrier_on(dev);
4245 netif_carrier_off(dev);
4250 * called by network layer when interface is disabled
4251 * shutdown hardware and release resources
4253 * dev pointer to network device structure
4255 * returns 0 if success, otherwise error code
4257 static int hdlcdev_close(struct net_device *dev)
4259 MGSLPC_INFO *info = dev_to_port(dev);
4260 unsigned long flags;
4262 if (debug_level >= DEBUG_LEVEL_INFO)
4263 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
4265 netif_stop_queue(dev);
4267 /* shutdown adapter and release resources */
4272 spin_lock_irqsave(&info->netlock, flags);
4274 spin_unlock_irqrestore(&info->netlock, flags);
4280 * called by network layer to process IOCTL call to network device
4282 * dev pointer to network device structure
4283 * ifr pointer to network interface request structure
4284 * cmd IOCTL command code
4286 * returns 0 if success, otherwise error code
4288 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
4290 const size_t size = sizeof(sync_serial_settings);
4291 sync_serial_settings new_line;
4292 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
4293 MGSLPC_INFO *info = dev_to_port(dev);
4296 if (debug_level >= DEBUG_LEVEL_INFO)
4297 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
4299 /* return error if TTY interface open */
4303 if (cmd != SIOCWANDEV)
4304 return hdlc_ioctl(dev, ifr, cmd);
4306 switch(ifr->ifr_settings.type) {
4307 case IF_GET_IFACE: /* return current sync_serial_settings */
4309 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
4310 if (ifr->ifr_settings.size < size) {
4311 ifr->ifr_settings.size = size; /* data size wanted */
4315 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4316 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4317 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4318 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4321 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
4322 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
4323 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
4324 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
4325 default: new_line.clock_type = CLOCK_DEFAULT;
4328 new_line.clock_rate = info->params.clock_speed;
4329 new_line.loopback = info->params.loopback ? 1:0;
4331 if (copy_to_user(line, &new_line, size))
4335 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
4337 if(!capable(CAP_NET_ADMIN))
4339 if (copy_from_user(&new_line, line, size))
4342 switch (new_line.clock_type)
4344 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
4345 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
4346 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
4347 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
4348 case CLOCK_DEFAULT: flags = info->params.flags &
4349 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4350 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4351 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4352 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
4353 default: return -EINVAL;
4356 if (new_line.loopback != 0 && new_line.loopback != 1)
4359 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
4360 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
4361 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
4362 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
4363 info->params.flags |= flags;
4365 info->params.loopback = new_line.loopback;
4367 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
4368 info->params.clock_speed = new_line.clock_rate;
4370 info->params.clock_speed = 0;
4372 /* if network interface up, reprogram hardware */
4374 mgslpc_program_hw(info);
4378 return hdlc_ioctl(dev, ifr, cmd);
4383 * called by network layer when transmit timeout is detected
4385 * dev pointer to network device structure
4387 static void hdlcdev_tx_timeout(struct net_device *dev)
4389 MGSLPC_INFO *info = dev_to_port(dev);
4390 struct net_device_stats *stats = hdlc_stats(dev);
4391 unsigned long flags;
4393 if (debug_level >= DEBUG_LEVEL_INFO)
4394 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
4397 stats->tx_aborted_errors++;
4399 spin_lock_irqsave(&info->lock,flags);
4401 spin_unlock_irqrestore(&info->lock,flags);
4403 netif_wake_queue(dev);
4407 * called by device driver when transmit completes
4408 * reenable network layer transmit if stopped
4410 * info pointer to device instance information
4412 static void hdlcdev_tx_done(MGSLPC_INFO *info)
4414 if (netif_queue_stopped(info->netdev))
4415 netif_wake_queue(info->netdev);
4419 * called by device driver when frame received
4420 * pass frame to network layer
4422 * info pointer to device instance information
4423 * buf pointer to buffer contianing frame data
4424 * size count of data bytes in buf
4426 static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
4428 struct sk_buff *skb = dev_alloc_skb(size);
4429 struct net_device *dev = info->netdev;
4430 struct net_device_stats *stats = hdlc_stats(dev);
4432 if (debug_level >= DEBUG_LEVEL_INFO)
4433 printk("hdlcdev_rx(%s)\n",dev->name);
4436 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
4437 stats->rx_dropped++;
4441 memcpy(skb_put(skb, size),buf,size);
4443 skb->protocol = hdlc_type_trans(skb, info->netdev);
4445 stats->rx_packets++;
4446 stats->rx_bytes += size;
4450 info->netdev->last_rx = jiffies;
4454 * called by device driver when adding device instance
4455 * do generic HDLC initialization
4457 * info pointer to device instance information
4459 * returns 0 if success, otherwise error code
4461 static int hdlcdev_init(MGSLPC_INFO *info)
4464 struct net_device *dev;
4467 /* allocate and initialize network and HDLC layer objects */
4469 if (!(dev = alloc_hdlcdev(info))) {
4470 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
4474 /* for network layer reporting purposes only */
4475 dev->base_addr = info->io_base;
4476 dev->irq = info->irq_level;
4478 /* network layer callbacks and settings */
4479 dev->do_ioctl = hdlcdev_ioctl;
4480 dev->open = hdlcdev_open;
4481 dev->stop = hdlcdev_close;
4482 dev->tx_timeout = hdlcdev_tx_timeout;
4483 dev->watchdog_timeo = 10*HZ;
4484 dev->tx_queue_len = 50;
4486 /* generic HDLC layer callbacks and settings */
4487 hdlc = dev_to_hdlc(dev);
4488 hdlc->attach = hdlcdev_attach;
4489 hdlc->xmit = hdlcdev_xmit;
4491 /* register objects with HDLC layer */
4492 if ((rc = register_hdlc_device(dev))) {
4493 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
4503 * called by device driver when removing device instance
4504 * do generic HDLC cleanup
4506 * info pointer to device instance information
4508 static void hdlcdev_exit(MGSLPC_INFO *info)
4510 unregister_hdlc_device(info->netdev);
4511 free_netdev(info->netdev);
4512 info->netdev = NULL;
4515 #endif /* CONFIG_HDLC */