2 * linux/drivers/ide/pci/slc90e66.c Version 0.16 Jul 14, 2007
4 * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
7 * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
8 * but this keeps the ISA-Bridge and slots alive.
12 #include <linux/types.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/ioport.h>
16 #include <linux/pci.h>
17 #include <linux/hdreg.h>
18 #include <linux/ide.h>
19 #include <linux/delay.h>
20 #include <linux/init.h>
24 static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
45 static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
47 ide_hwif_t *hwif = HWIF(drive);
48 struct pci_dev *dev = hwif->pci_dev;
49 int is_slave = drive->dn & 1;
50 int master_port = hwif->channel ? 0x42 : 0x40;
51 int slave_port = 0x44;
57 static const u8 timings[][2]= {
64 spin_lock_irqsave(&ide_lock, flags);
65 pci_read_config_word(dev, master_port, &master_data);
68 control |= 1; /* Programmable timing on */
69 if (drive->media == ide_disk)
70 control |= 4; /* Prefetch, post write */
72 control |= 2; /* IORDY */
74 master_data |= 0x4000;
75 master_data &= ~0x0070;
77 /* Set PPE, IE and TIME */
78 master_data |= control << 4;
80 pci_read_config_byte(dev, slave_port, &slave_data);
81 slave_data &= hwif->channel ? 0x0f : 0xf0;
82 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
83 (hwif->channel ? 4 : 0);
85 master_data &= ~0x3307;
87 /* enable PPE, IE and TIME */
88 master_data |= control;
90 master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
92 pci_write_config_word(dev, master_port, master_data);
94 pci_write_config_byte(dev, slave_port, slave_data);
95 spin_unlock_irqrestore(&ide_lock, flags);
98 static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
100 slc90e66_tune_pio(drive, pio);
101 (void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
104 static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
106 ide_hwif_t *hwif = HWIF(drive);
107 struct pci_dev *dev = hwif->pci_dev;
108 u8 maslave = hwif->channel ? 0x42 : 0x40;
109 int sitre = 0, a_speed = 7 << (drive->dn * 4);
110 int u_speed = 0, u_flag = 1 << drive->dn;
111 u16 reg4042, reg44, reg48, reg4a;
113 pci_read_config_word(dev, maslave, ®4042);
114 sitre = (reg4042 & 0x4000) ? 1 : 0;
115 pci_read_config_word(dev, 0x44, ®44);
116 pci_read_config_word(dev, 0x48, ®48);
117 pci_read_config_word(dev, 0x4a, ®4a);
120 case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break;
121 case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break;
122 case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
123 case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
124 case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
127 case XFER_SW_DMA_2: break;
131 if (speed >= XFER_UDMA_0) {
132 if (!(reg48 & u_flag))
133 pci_write_config_word(dev, 0x48, reg48|u_flag);
134 /* FIXME: (reg4a & a_speed) ? */
135 if ((reg4a & u_speed) != u_speed) {
136 pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
137 pci_read_config_word(dev, 0x4a, ®4a);
138 pci_write_config_word(dev, 0x4a, reg4a|u_speed);
142 pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
144 pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
147 slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
149 return ide_config_drive_speed(drive, speed);
152 static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
154 drive->init_speed = 0;
156 if (ide_tune_dma(drive))
159 if (ide_use_fast_pio(drive))
160 ide_set_max_pio(drive);
165 static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
168 u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */
173 hwif->irq = hwif->channel ? 15 : 14;
175 hwif->speedproc = &slc90e66_tune_chipset;
176 hwif->set_pio_mode = &slc90e66_set_pio_mode;
178 pci_read_config_byte(hwif->pci_dev, 0x47, ®47);
180 if (!hwif->dma_base) {
181 hwif->drives[0].autotune = 1;
182 hwif->drives[1].autotune = 1;
187 hwif->ultra_mask = 0x1f;
188 hwif->mwdma_mask = 0x06;
189 hwif->swdma_mask = 0x04;
191 if (hwif->cbl != ATA_CBL_PATA40_SHORT)
192 /* bit[0(1)]: 0:80, 1:40 */
193 hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
195 hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
199 hwif->drives[0].autodma = hwif->autodma;
200 hwif->drives[1].autodma = hwif->autodma;
203 static ide_pci_device_t slc90e66_chipset __devinitdata = {
205 .init_hwif = init_hwif_slc90e66,
207 .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
208 .bootable = ON_BOARD,
209 .pio_mask = ATA_PIO4,
212 static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
214 return ide_setup_pci_device(dev, &slc90e66_chipset);
217 static struct pci_device_id slc90e66_pci_tbl[] = {
218 { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0},
221 MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
223 static struct pci_driver driver = {
224 .name = "SLC90e66_IDE",
225 .id_table = slc90e66_pci_tbl,
226 .probe = slc90e66_init_one,
229 static int __init slc90e66_ide_init(void)
231 return ide_pci_register_driver(&driver);
234 module_init(slc90e66_ide_init);
236 MODULE_AUTHOR("Andre Hedrick");
237 MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
238 MODULE_LICENSE("GPL");