drivers/media/video/bt8xx/bttv-cards.c

   1 /*
   2
   3     bttv-cards.c
   4
   5     this file has configuration informations - card-specific stuff
   6     like the big tvcards array for the most part
   7
   8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                            & Marcus Metzler (mocm@thp.uni-koeln.de)
  10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12     This program is free software; you can redistribute it and/or modify
  13     it under the terms of the GNU General Public License as published by
  14     the Free Software Foundation; either version 2 of the License, or
  15     (at your option) any later version.
  16
  17     This program is distributed in the hope that it will be useful,
  18     but WITHOUT ANY WARRANTY; without even the implied warranty of
  19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20     GNU General Public License for more details.
  21
  22     You should have received a copy of the GNU General Public License
  23     along with this program; if not, write to the Free Software
  24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26 */
  27
  28 #include <linux/delay.h>
  29 #include <linux/module.h>
  30 #include <linux/kmod.h>
  31 #include <linux/init.h>
  32 #include <linux/pci.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/firmware.h>
  35 #include <net/checksum.h>
  36
  37 #include <asm/io.h>
  38
  39 #include "bttvp.h"
  40 #include <media/v4l2-common.h>
  41 #include <media/tvaudio.h>
  42 #include "bttv-audio-hook.h"
  43
  44 /* fwd decl */
  45 static void boot_msp34xx(struct bttv *btv, int pin);
  46 static void boot_bt832(struct bttv *btv);
  47 static void hauppauge_eeprom(struct bttv *btv);
  48 static void avermedia_eeprom(struct bttv *btv);
  49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  50 static void modtec_eeprom(struct bttv *btv);
  51 static void init_PXC200(struct bttv *btv);
  52 static void init_RTV24(struct bttv *btv);
  53
  54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
  55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
  56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
  57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  59
  60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  61
  62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  63 static void picolo_tetra_init(struct bttv *btv);
  64
  65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  66 static void tibetCS16_init(struct bttv *btv);
  67
  68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  69 static void kodicom4400r_init(struct bttv *btv);
  70
  71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  73
  74 static int terratec_active_radio_upgrade(struct bttv *btv);
  75 static int tea5757_read(struct bttv *btv);
  76 static int tea5757_write(struct bttv *btv, int value);
  77 static void identify_by_eeprom(struct bttv *btv,
  78                                unsigned char eeprom_data[256]);
  79 static int __devinit pvr_boot(struct bttv *btv);
  80
  81 /* config variables */
  82 static unsigned int triton1;
  83 static unsigned int vsfx;
  84 static unsigned int latency = UNSET;
  85 int no_overlay=-1;
  86
  87 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  88 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  89 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  90 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  91 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  92 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
  93 #ifdef MODULE
  94 static unsigned int autoload = 1;
  95 #else
  96 static unsigned int autoload;
  97 #endif
  98 static unsigned int gpiomask = UNSET;
  99 static unsigned int audioall = UNSET;
 100 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 101
 102 /* insmod options */
 103 module_param(triton1,    int, 0444);
 104 module_param(vsfx,       int, 0444);
 105 module_param(no_overlay, int, 0444);
 106 module_param(latency,    int, 0444);
 107 module_param(gpiomask,   int, 0444);
 108 module_param(audioall,   int, 0444);
 109 module_param(autoload,   int, 0444);
 110
 111 module_param_array(card,     int, NULL, 0444);
 112 module_param_array(pll,      int, NULL, 0444);
 113 module_param_array(tuner,    int, NULL, 0444);
 114 module_param_array(svhs,     int, NULL, 0444);
 115 module_param_array(remote,   int, NULL, 0444);
 116 module_param_array(audiomux, int, NULL, 0444);
 117
 118 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 119                  "[enable bug compatibility for triton1 + others]");
 120 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 121                  "[yet another chipset flaw workaround]");
 122 MODULE_PARM_DESC(latency,"pci latency timer");
 123 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 124 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 125 MODULE_PARM_DESC(tuner,"specify installed tuner type");
 126 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
 127 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 128                 " [some VIA/SIS chipsets are known to have problem with overlay]");
 129
 130 /* ----------------------------------------------------------------------- */
 131 /* list of card IDs for bt878+ cards                                       */
 132
 133 static struct CARD {
 134         unsigned id;
 135         int cardnr;
 136         char *name;
 137 } cards[] __devinitdata = {
 138         { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 139         { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 140         { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 141         { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 142         { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 143         { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 144         { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 145         { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 146         { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 147
 148         { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 149         { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 150
 151         { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 152         { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 153         { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 154         { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 155         { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 156         { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 157         { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 158         { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 159         { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 160
 161         { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 162         /* some cards ship with byteswapped IDs ... */
 163         { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 164         { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 165         /* this seems to happen as well ... */
 166         { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 167
 168         { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 169         { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 170         { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 171
 172         { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 173         { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 174         { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 175         { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 176         { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 177         { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 178         { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 179
 180         { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 181         { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 182         { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 183         { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 184         { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 185
 186         { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 187         { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 188         { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 189         { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 190
 191         { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 192         { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 193         /* clashes with FlyVideo
 194          *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 195         { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 196         { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 197         { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 198         { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 199
 200         { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 201         { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 202         { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 203         { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 204         { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 205
 206         { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 207         { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 208         { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 209         { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 210         { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 211
 212         { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 213         { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 214         { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 215         { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 216
 217         { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 218         { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 219         { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 220         { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 221
 222         { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 223         { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 224         { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 225         { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 226         { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 227         { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 228         { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 229         { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 230         { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 231         { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 232         { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 233         { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 234         { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 235         { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 236         { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 237         { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 238         { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 239         { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 240         { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 241         { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 242         { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 243         { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 244         { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 245         { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 246         { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 247
 248         { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 249         { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 250
 251         { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 252         { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 253         { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 254         { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 255         { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 256         { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 257
 258         { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 259         { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 260
 261         { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 262         { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 263         { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 264         { 0x03116000, BTTV_BOARD_SENSORAY311,   "Sensoray 311" },
 265         { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 266         { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 267         { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 268         { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 269         { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 270
 271         { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 272         { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 273
 274         { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 275         { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 276         { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 277         { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 278
 279         { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 280
 281         { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 282         { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 283
 284         /* likely broken, vendor id doesn't match the other magic views ...
 285          * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 286
 287         /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 288         * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 289
 290         /* DVB cards (using pci function .1 for mpeg data xfer) */
 291         { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 292         { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 293         { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 294         { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 295         { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 296         { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 297         { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 298         { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 299         { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 300         { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 301         { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 302         { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 303         { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 304
 305         { 0, -1, NULL }
 306 };
 307
 308 /* ----------------------------------------------------------------------- */
 309 /* array with description for bt848 / bt878 tv/grabber cards               */
 310
 311 struct tvcard bttv_tvcards[] = {
 312         /* ---- card 0x00 ---------------------------------- */
 313         [BTTV_BOARD_UNKNOWN] = {
 314                 .name           = " *** UNKNOWN/GENERIC *** ",
 315                 .video_inputs   = 4,
 316                 .audio_inputs   = 1,
 317                 .tuner          = 0,
 318                 .svhs           = 2,
 319                 .muxsel         = { 2, 3, 1, 0 },
 320                 .tuner_type     = UNSET,
 321                 .tuner_addr     = ADDR_UNSET,
 322                 .radio_addr     = ADDR_UNSET,
 323         },
 324         [BTTV_BOARD_MIRO] = {
 325                 .name           = "MIRO PCTV",
 326                 .video_inputs   = 4,
 327                 .audio_inputs   = 1,
 328                 .tuner          = 0,
 329                 .svhs           = 2,
 330                 .gpiomask       = 15,
 331                 .muxsel         = { 2, 3, 1, 1 },
 332                 .gpiomux        = { 2, 0, 0, 0 },
 333                 .gpiomute       = 10,
 334                 .needs_tvaudio  = 1,
 335                 .tuner_type     = UNSET,
 336                 .tuner_addr     = ADDR_UNSET,
 337                 .radio_addr     = ADDR_UNSET,
 338         },
 339         [BTTV_BOARD_HAUPPAUGE] = {
 340                 .name           = "Hauppauge (bt848)",
 341                 .video_inputs   = 4,
 342                 .audio_inputs   = 1,
 343                 .tuner          = 0,
 344                 .svhs           = 2,
 345                 .gpiomask       = 7,
 346                 .muxsel         = { 2, 3, 1, 1 },
 347                 .gpiomux        = { 0, 1, 2, 3 },
 348                 .gpiomute       = 4,
 349                 .needs_tvaudio  = 1,
 350                 .tuner_type     = UNSET,
 351                 .tuner_addr     = ADDR_UNSET,
 352                 .radio_addr     = ADDR_UNSET,
 353         },
 354         [BTTV_BOARD_STB] = {
 355                 .name           = "STB, Gateway P/N 6000699 (bt848)",
 356                 .video_inputs   = 3,
 357                 .audio_inputs   = 1,
 358                 .tuner          = 0,
 359                 .svhs           = 2,
 360                 .gpiomask       = 7,
 361                 .muxsel         = { 2, 3, 1, 1 },
 362                 .gpiomux        = { 4, 0, 2, 3 },
 363                 .gpiomute       = 1,
 364                 .no_msp34xx     = 1,
 365                 .needs_tvaudio  = 1,
 366                 .tuner_type     = TUNER_PHILIPS_NTSC,
 367                 .tuner_addr     = ADDR_UNSET,
 368                 .radio_addr     = ADDR_UNSET,
 369                 .pll            = PLL_28,
 370                 .has_radio      = 1,
 371         },
 372
 373         /* ---- card 0x04 ---------------------------------- */
 374         [BTTV_BOARD_INTEL] = {
 375                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 376                 .video_inputs   = 4,
 377                 .audio_inputs   = 0,
 378                 .tuner          = UNSET,
 379                 .svhs           = 2,
 380                 .gpiomask       = 0,
 381                 .muxsel         = { 2, 3, 1, 1 },
 382                 .gpiomux        = { 0 },
 383                 .needs_tvaudio  = 0,
 384                 .tuner_type     = TUNER_ABSENT,
 385                 .tuner_addr     = ADDR_UNSET,
 386                 .radio_addr     = ADDR_UNSET,
 387         },
 388         [BTTV_BOARD_DIAMOND] = {
 389                 .name           = "Diamond DTV2000",
 390                 .video_inputs   = 4,
 391                 .audio_inputs   = 1,
 392                 .tuner          = 0,
 393                 .svhs           = 2,
 394                 .gpiomask       = 3,
 395                 .muxsel         = { 2, 3, 1, 0 },
 396                 .gpiomux        = { 0, 1, 0, 1 },
 397                 .gpiomute       = 3,
 398                 .needs_tvaudio  = 1,
 399                 .tuner_type     = UNSET,
 400                 .tuner_addr     = ADDR_UNSET,
 401                 .radio_addr     = ADDR_UNSET,
 402         },
 403         [BTTV_BOARD_AVERMEDIA] = {
 404                 .name           = "AVerMedia TVPhone",
 405                 .video_inputs   = 3,
 406                 .audio_inputs   = 1,
 407                 .tuner          = 0,
 408                 .svhs           = 3,
 409                 .muxsel         = { 2, 3, 1, 1 },
 410                 .gpiomask       = 0x0f,
 411                 .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 412                 /*                0x04 for some cards ?? */
 413                 .needs_tvaudio  = 1,
 414                 .tuner_type     = UNSET,
 415                 .tuner_addr     = ADDR_UNSET,
 416                 .radio_addr     = ADDR_UNSET,
 417                 .audio_mode_gpio= avermedia_tvphone_audio,
 418                 .has_remote     = 1,
 419         },
 420         [BTTV_BOARD_MATRIX_VISION] = {
 421                 .name           = "MATRIX-Vision MV-Delta",
 422                 .video_inputs   = 5,
 423                 .audio_inputs   = 1,
 424                 .tuner          = UNSET,
 425                 .svhs           = 3,
 426                 .gpiomask       = 0,
 427                 .muxsel         = { 2, 3, 1, 0, 0 },
 428                 .gpiomux        = { 0 },
 429                 .needs_tvaudio  = 1,
 430                 .tuner_type     = UNSET,
 431                 .tuner_addr     = ADDR_UNSET,
 432                 .radio_addr     = ADDR_UNSET,
 433         },
 434
 435         /* ---- card 0x08 ---------------------------------- */
 436         [BTTV_BOARD_FLYVIDEO] = {
 437                 .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 438                 .video_inputs   = 4,
 439                 .audio_inputs   = 1,
 440                 .tuner          = 0,
 441                 .svhs           = 2,
 442                 .gpiomask       = 0xc00,
 443                 .muxsel         = { 2, 3, 1, 1 },
 444                 .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 445                 .gpiomute       = 0xc00,
 446                 .needs_tvaudio  = 1,
 447                 .pll            = PLL_28,
 448                 .tuner_type     = UNSET,
 449                 .tuner_addr     = ADDR_UNSET,
 450                 .radio_addr     = ADDR_UNSET,
 451         },
 452         [BTTV_BOARD_TURBOTV] = {
 453                 .name           = "IMS/IXmicro TurboTV",
 454                 .video_inputs   = 3,
 455                 .audio_inputs   = 1,
 456                 .tuner          = 0,
 457                 .svhs           = 2,
 458                 .gpiomask       = 3,
 459                 .muxsel         = { 2, 3, 1, 1 },
 460                 .gpiomux        = { 1, 1, 2, 3 },
 461                 .needs_tvaudio  = 0,
 462                 .pll            = PLL_28,
 463                 .tuner_type     = TUNER_TEMIC_PAL,
 464                 .tuner_addr     = ADDR_UNSET,
 465                 .radio_addr     = ADDR_UNSET,
 466         },
 467         [BTTV_BOARD_HAUPPAUGE878] = {
 468                 .name           = "Hauppauge (bt878)",
 469                 .video_inputs   = 4,
 470                 .audio_inputs   = 1,
 471                 .tuner          = 0,
 472                 .svhs           = 2,
 473                 .gpiomask       = 0x0f, /* old: 7 */
 474                 .muxsel         = { 2, 0, 1, 1 },
 475                 .gpiomux        = { 0, 1, 2, 3 },
 476                 .gpiomute       = 4,
 477                 .needs_tvaudio  = 1,
 478                 .pll            = PLL_28,
 479                 .tuner_type     = UNSET,
 480                 .tuner_addr     = ADDR_UNSET,
 481                 .radio_addr     = ADDR_UNSET,
 482         },
 483         [BTTV_BOARD_MIROPRO] = {
 484                 .name           = "MIRO PCTV pro",
 485                 .video_inputs   = 3,
 486                 .audio_inputs   = 1,
 487                 .tuner          = 0,
 488                 .svhs           = 2,
 489                 .gpiomask       = 0x3014f,
 490                 .muxsel         = { 2, 3, 1, 1 },
 491                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
 492                 .gpiomute       = 10,
 493                 .needs_tvaudio  = 1,
 494                 .tuner_type     = UNSET,
 495                 .tuner_addr     = ADDR_UNSET,
 496                 .radio_addr     = ADDR_UNSET,
 497         },
 498
 499         /* ---- card 0x0c ---------------------------------- */
 500         [BTTV_BOARD_ADSTECH_TV] = {
 501                 .name           = "ADS Technologies Channel Surfer TV (bt848)",
 502                 .video_inputs   = 3,
 503                 .audio_inputs   = 1,
 504                 .tuner          = 0,
 505                 .svhs           = 2,
 506                 .gpiomask       = 15,
 507                 .muxsel         = { 2, 3, 1, 1 },
 508                 .gpiomux        = { 13, 14, 11, 7 },
 509                 .needs_tvaudio  = 1,
 510                 .tuner_type     = UNSET,
 511                 .tuner_addr     = ADDR_UNSET,
 512                 .radio_addr     = ADDR_UNSET,
 513         },
 514         [BTTV_BOARD_AVERMEDIA98] = {
 515                 .name           = "AVerMedia TVCapture 98",
 516                 .video_inputs   = 3,
 517                 .audio_inputs   = 4,
 518                 .tuner          = 0,
 519                 .svhs           = 2,
 520                 .gpiomask       = 15,
 521                 .muxsel         = { 2, 3, 1, 1 },
 522                 .gpiomux        = { 13, 14, 11, 7 },
 523                 .needs_tvaudio  = 1,
 524                 .msp34xx_alt    = 1,
 525                 .pll            = PLL_28,
 526                 .tuner_type     = TUNER_PHILIPS_PAL,
 527                 .tuner_addr     = ADDR_UNSET,
 528                 .radio_addr     = ADDR_UNSET,
 529                 .audio_mode_gpio= avermedia_tv_stereo_audio,
 530                 .no_gpioirq     = 1,
 531         },
 532         [BTTV_BOARD_VHX] = {
 533                 .name           = "Aimslab Video Highway Xtreme (VHX)",
 534                 .video_inputs   = 3,
 535                 .audio_inputs   = 1,
 536                 .tuner          = 0,
 537                 .svhs           = 2,
 538                 .gpiomask       = 7,
 539                 .muxsel         = { 2, 3, 1, 1 },
 540                 .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 541                 .gpiomute       = 4,
 542                 .needs_tvaudio  = 1,
 543                 .pll            = PLL_28,
 544                 .tuner_type     = UNSET,
 545                 .tuner_addr     = ADDR_UNSET,
 546                 .radio_addr     = ADDR_UNSET,
 547         },
 548         [BTTV_BOARD_ZOLTRIX] = {
 549                 .name           = "Zoltrix TV-Max",
 550                 .video_inputs   = 3,
 551                 .audio_inputs   = 1,
 552                 .tuner          = 0,
 553                 .svhs           = 2,
 554                 .gpiomask       = 15,
 555                 .muxsel         = { 2, 3, 1, 1 },
 556                 .gpiomux        = { 0, 0, 1, 0 },
 557                 .gpiomute       = 10,
 558                 .needs_tvaudio  = 1,
 559                 .tuner_type     = UNSET,
 560                 .tuner_addr     = ADDR_UNSET,
 561                 .radio_addr     = ADDR_UNSET,
 562         },
 563
 564         /* ---- card 0x10 ---------------------------------- */
 565         [BTTV_BOARD_PIXVIEWPLAYTV] = {
 566                 .name           = "Prolink Pixelview PlayTV (bt878)",
 567                 .video_inputs   = 3,
 568                 .audio_inputs   = 1,
 569                 .tuner          = 0,
 570                 .svhs           = 2,
 571                 .gpiomask       = 0x01fe00,
 572                 .muxsel         = { 2, 3, 1, 1 },
 573                 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 574                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 575                 .gpiomute       = 0x002000,
 576                 .needs_tvaudio  = 1,
 577                 .pll            = PLL_28,
 578                 .tuner_type     = UNSET,
 579         },
 580         [BTTV_BOARD_WINVIEW_601] = {
 581                 .name           = "Leadtek WinView 601",
 582                 .video_inputs   = 3,
 583                 .audio_inputs   = 1,
 584                 .tuner          = 0,
 585                 .svhs           = 2,
 586                 .gpiomask       = 0x8300f8,
 587                 .muxsel         = { 2, 3, 1, 1,0 },
 588                 .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 589                 .gpiomute       = 0xcfa007,
 590                 .needs_tvaudio  = 1,
 591                 .tuner_type     = UNSET,
 592                 .tuner_addr     = ADDR_UNSET,
 593                 .radio_addr     = ADDR_UNSET,
 594                 .volume_gpio    = winview_volume,
 595                 .has_radio      = 1,
 596         },
 597         [BTTV_BOARD_AVEC_INTERCAP] = {
 598                 .name           = "AVEC Intercapture",
 599                 .video_inputs   = 3,
 600                 .audio_inputs   = 2,
 601                 .tuner          = 0,
 602                 .svhs           = 2,
 603                 .gpiomask       = 0,
 604                 .muxsel         = { 2, 3, 1, 1 },
 605                 .gpiomux        = { 1, 0, 0, 0 },
 606                 .needs_tvaudio  = 1,
 607                 .tuner_type     = UNSET,
 608                 .tuner_addr     = ADDR_UNSET,
 609                 .radio_addr     = ADDR_UNSET,
 610         },
 611         [BTTV_BOARD_LIFE_FLYKIT] = {
 612                 .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 613                 .video_inputs   = 4,
 614                 .audio_inputs   = 1,
 615                 .tuner          = UNSET,
 616                 .svhs           = UNSET,
 617                 .gpiomask       = 0x8dff00,
 618                 .muxsel         = { 2, 3, 1, 1 },
 619                 .gpiomux        = { 0 },
 620                 .no_msp34xx     = 1,
 621                 .tuner_type     = UNSET,
 622                 .tuner_addr     = ADDR_UNSET,
 623                 .radio_addr     = ADDR_UNSET,
 624         },
 625
 626         /* ---- card 0x14 ---------------------------------- */
 627         [BTTV_BOARD_CEI_RAFFLES] = {
 628                 .name           = "CEI Raffles Card",
 629                 .video_inputs   = 3,
 630                 .audio_inputs   = 3,
 631                 .tuner          = 0,
 632                 .svhs           = 2,
 633                 .muxsel         = { 2, 3, 1, 1 },
 634                 .tuner_type     = UNSET,
 635                 .tuner_addr     = ADDR_UNSET,
 636                 .radio_addr     = ADDR_UNSET,
 637         },
 638         [BTTV_BOARD_CONFERENCETV] = {
 639                 .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 640                 .video_inputs   = 4,
 641                 .audio_inputs   = 2,  /* tuner, line in */
 642                 .tuner          = 0,
 643                 .svhs           = 2,
 644                 .gpiomask       = 0x1800,
 645                 .muxsel         = { 2, 3, 1, 1 },
 646                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 647                 .gpiomute       = 0x1800,
 648                 .pll            = PLL_28,
 649                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 650                 .tuner_addr     = ADDR_UNSET,
 651                 .radio_addr     = ADDR_UNSET,
 652         },
 653         [BTTV_BOARD_PHOEBE_TVMAS] = {
 654                 .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 655                 .video_inputs   = 3,
 656                 .audio_inputs   = 1,
 657                 .tuner          = 0,
 658                 .svhs           = 2,
 659                 .gpiomask       = 0xc00,
 660                 .muxsel         = { 2, 3, 1, 1 },
 661                 .gpiomux        = { 0, 1, 0x800, 0x400 },
 662                 .gpiomute       = 0xc00,
 663                 .needs_tvaudio  = 1,
 664                 .pll            = PLL_28,
 665                 .tuner_type     = UNSET,
 666                 .tuner_addr     = ADDR_UNSET,
 667                 .radio_addr     = ADDR_UNSET,
 668         },
 669         [BTTV_BOARD_MODTEC_205] = {
 670                 .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 671                 .video_inputs   = 3,
 672                 .audio_inputs   = 1,
 673                 .tuner          = 0,
 674                 .svhs           = UNSET,
 675                 .gpiomask       = 7,
 676                 .muxsel         = { 2, 3, -1 },
 677                 .digital_mode   = DIGITAL_MODE_CAMERA,
 678                 .gpiomux        = { 0, 0, 0, 0 },
 679                 .no_msp34xx     = 1,
 680                 .pll            = PLL_28,
 681                 .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 682                 .tuner_addr     = ADDR_UNSET,
 683                 .radio_addr     = ADDR_UNSET,
 684         },
 685
 686         /* ---- card 0x18 ---------------------------------- */
 687         [BTTV_BOARD_MAGICTVIEW061] = {
 688                 .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 689                 .video_inputs   = 3,
 690                 .audio_inputs   = 1,
 691                 .tuner          = 0,
 692                 .svhs           = 2,
 693                 .gpiomask       = 0xe00,
 694                 .muxsel         = { 2, 3, 1, 1 },
 695                 .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 696                 .gpiomute       = 0xc00,
 697                 .needs_tvaudio  = 1,
 698                 .pll            = PLL_28,
 699                 .tuner_type     = UNSET,
 700                 .tuner_addr     = ADDR_UNSET,
 701                 .radio_addr     = ADDR_UNSET,
 702                 .has_remote     = 1,
 703         },
 704         [BTTV_BOARD_VOBIS_BOOSTAR] = {
 705                 .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 706                 .video_inputs   = 3,
 707                 .audio_inputs   = 1,
 708                 .tuner          = 0,
 709                 .svhs           = 2,
 710                 .gpiomask       = 0x1f0fff,
 711                 .muxsel         = { 2, 3, 1, 1 },
 712                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 713                 .gpiomute       = 0x40000,
 714                 .needs_tvaudio  = 0,
 715                 .tuner_type     = TUNER_PHILIPS_PAL,
 716                 .tuner_addr     = ADDR_UNSET,
 717                 .radio_addr     = ADDR_UNSET,
 718                 .audio_mode_gpio= terratv_audio,
 719         },
 720         [BTTV_BOARD_HAUPPAUG_WCAM] = {
 721                 .name           = "Hauppauge WinCam newer (bt878)",
 722                 .video_inputs   = 4,
 723                 .audio_inputs   = 1,
 724                 .tuner          = 0,
 725                 .svhs           = 3,
 726                 .gpiomask       = 7,
 727                 .muxsel         = { 2, 0, 1, 1 },
 728                 .gpiomux        = { 0, 1, 2, 3 },
 729                 .gpiomute       = 4,
 730                 .needs_tvaudio  = 1,
 731                 .tuner_type     = UNSET,
 732                 .tuner_addr     = ADDR_UNSET,
 733                 .radio_addr     = ADDR_UNSET,
 734         },
 735         [BTTV_BOARD_MAXI] = {
 736                 .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 737                 .video_inputs   = 4,
 738                 .audio_inputs   = 2,
 739                 .tuner          = 0,
 740                 .svhs           = 2,
 741                 .gpiomask       = 0x1800,
 742                 .muxsel         = { 2, 3, 1, 1 },
 743                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 744                 .gpiomute       = 0x1800,
 745                 .pll            = PLL_28,
 746                 .tuner_type     = TUNER_PHILIPS_SECAM,
 747                 .tuner_addr     = ADDR_UNSET,
 748                 .radio_addr     = ADDR_UNSET,
 749         },
 750
 751         /* ---- card 0x1c ---------------------------------- */
 752         [BTTV_BOARD_TERRATV] = {
 753                 .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 754                 .video_inputs   = 3,
 755                 .audio_inputs   = 1,
 756                 .tuner          = 0,
 757                 .svhs           = 2,
 758                 .gpiomask       = 0x1f0fff,
 759                 .muxsel         = { 2, 3, 1, 1 },
 760                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 761                 .gpiomute       = 0x40000,
 762                 .needs_tvaudio  = 0,
 763                 .tuner_type     = TUNER_PHILIPS_PAL,
 764                 .tuner_addr     = ADDR_UNSET,
 765                 .radio_addr     = ADDR_UNSET,
 766                 .audio_mode_gpio= terratv_audio,
 767                 /* GPIO wiring:
 768                 External 20 pin connector (for Active Radio Upgrade board)
 769                 gpio00: i2c-sda
 770                 gpio01: i2c-scl
 771                 gpio02: om5610-data
 772                 gpio03: om5610-clk
 773                 gpio04: om5610-wre
 774                 gpio05: om5610-stereo
 775                 gpio06: rds6588-davn
 776                 gpio07: Pin 7 n.c.
 777                 gpio08: nIOW
 778                 gpio09+10: nIOR, nSEL ?? (bt878)
 779                         gpio09: nIOR (bt848)
 780                         gpio10: nSEL (bt848)
 781                 Sound Routing:
 782                 gpio16: u2-A0 (1st 4052bt)
 783                 gpio17: u2-A1
 784                 gpio18: u2-nEN
 785                 gpio19: u4-A0 (2nd 4052)
 786                 gpio20: u4-A1
 787                         u4-nEN - GND
 788                 Btspy:
 789                         00000 : Cdrom (internal audio input)
 790                         10000 : ext. Video audio input
 791                         20000 : TV Mono
 792                         a0000 : TV Mono/2
 793                 1a0000 : TV Stereo
 794                         30000 : Radio
 795                         40000 : Mute
 796         */
 797
 798         },
 799         [BTTV_BOARD_PXC200] = {
 800                 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 801                 .name           = "Imagenation PXC200",
 802                 .video_inputs   = 5,
 803                 .audio_inputs   = 1,
 804                 .tuner          = UNSET,
 805                 .svhs           = 1, /* was: 4 */
 806                 .gpiomask       = 0,
 807                 .muxsel         = { 2, 3, 1, 0, 0},
 808                 .gpiomux        = { 0 },
 809                 .needs_tvaudio  = 1,
 810                 .tuner_type     = UNSET,
 811                 .tuner_addr     = ADDR_UNSET,
 812                 .radio_addr     = ADDR_UNSET,
 813                 .muxsel_hook    = PXC200_muxsel,
 814
 815         },
 816         [BTTV_BOARD_FLYVIDEO_98] = {
 817                 .name           = "Lifeview FlyVideo 98 LR50",
 818                 .video_inputs   = 4,
 819                 .audio_inputs   = 1,
 820                 .tuner          = 0,
 821                 .svhs           = 2,
 822                 .gpiomask       = 0x1800,  /* 0x8dfe00 */
 823                 .muxsel         = { 2, 3, 1, 1 },
 824                 .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 825                 .gpiomute       = 0x1800,
 826                 .pll            = PLL_28,
 827                 .tuner_type     = UNSET,
 828                 .tuner_addr     = ADDR_UNSET,
 829                 .radio_addr     = ADDR_UNSET,
 830         },
 831         [BTTV_BOARD_IPROTV] = {
 832                 .name           = "Formac iProTV, Formac ProTV I (bt848)",
 833                 .video_inputs   = 4,
 834                 .audio_inputs   = 1,
 835                 .tuner          = 0,
 836                 .svhs           = 3,
 837                 .gpiomask       = 1,
 838                 .muxsel         = { 2, 3, 1, 1 },
 839                 .gpiomux        = { 1, 0, 0, 0 },
 840                 .pll            = PLL_28,
 841                 .tuner_type     = TUNER_PHILIPS_PAL,
 842                 .tuner_addr     = ADDR_UNSET,
 843                 .radio_addr     = ADDR_UNSET,
 844         },
 845
 846         /* ---- card 0x20 ---------------------------------- */
 847         [BTTV_BOARD_INTEL_C_S_PCI] = {
 848                 .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 849                 .video_inputs   = 4,
 850                 .audio_inputs   = 0,
 851                 .tuner          = UNSET,
 852                 .svhs           = 2,
 853                 .gpiomask       = 0,
 854                 .muxsel         = { 2, 3, 1, 1 },
 855                 .gpiomux        = { 0 },
 856                 .needs_tvaudio  = 0,
 857                 .tuner_type     = TUNER_ABSENT,
 858                 .tuner_addr     = ADDR_UNSET,
 859                 .radio_addr     = ADDR_UNSET,
 860         },
 861         [BTTV_BOARD_TERRATVALUE] = {
 862                 .name           = "Terratec TerraTValue Version Bt878",
 863                 .video_inputs   = 3,
 864                 .audio_inputs   = 1,
 865                 .tuner          = 0,
 866                 .svhs           = 2,
 867                 .gpiomask       = 0xffff00,
 868                 .muxsel         = { 2, 3, 1, 1 },
 869                 .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 870                 .gpiomute       = 0x900,
 871                 .needs_tvaudio  = 1,
 872                 .pll            = PLL_28,
 873                 .tuner_type     = TUNER_PHILIPS_PAL,
 874                 .tuner_addr     = ADDR_UNSET,
 875                 .radio_addr     = ADDR_UNSET,
 876         },
 877         [BTTV_BOARD_WINFAST2000] = {
 878                 .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 879                 .video_inputs   = 4,
 880                 .audio_inputs   = 1,
 881                 .tuner          = 0,
 882                 .svhs           = 2,
 883                 .muxsel         = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */
 884                 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 885                 .gpiomask       = 0xb33000,
 886                 .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 887                 .gpiomute       = 0x800000,
 888                 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 889                         gpio23 -- hef4052:nEnable (0x800000)
 890                         gpio12 -- hef4052:A1
 891                         gpio13 -- hef4052:A0
 892                 0x0000: external audio
 893                 0x1000: FM
 894                 0x2000: TV
 895                 0x3000: n.c.
 896                 Note: There exists another variant "Winfast 2000" with tv stereo !?
 897                 Note: eeprom only contains FF and pci subsystem id 107d:6606
 898                 */
 899                 .needs_tvaudio  = 0,
 900                 .pll            = PLL_28,
 901                 .has_radio      = 1,
 902                 .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 903                 .tuner_addr     = ADDR_UNSET,
 904                 .radio_addr     = ADDR_UNSET,
 905                 .audio_mode_gpio= winfast2000_audio,
 906                 .has_remote     = 1,
 907         },
 908         [BTTV_BOARD_CHRONOS_VS2] = {
 909                 .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 910                 .video_inputs   = 4,
 911                 .audio_inputs   = 3,
 912                 .tuner          = 0,
 913                 .svhs           = 2,
 914                 .gpiomask       = 0x1800,
 915                 .muxsel         = { 2, 3, 1, 1 },
 916                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 917                 .gpiomute       = 0x1800,
 918                 .pll            = PLL_28,
 919                 .tuner_type     = UNSET,
 920                 .tuner_addr     = ADDR_UNSET,
 921                 .radio_addr     = ADDR_UNSET,
 922         },
 923
 924         /* ---- card 0x24 ---------------------------------- */
 925         [BTTV_BOARD_TYPHOON_TVIEW] = {
 926                 .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 927                 .video_inputs   = 4,
 928                 .audio_inputs   = 3,
 929                 .tuner          = 0,
 930                 .svhs           = 2,
 931                 .gpiomask       = 0x1800,
 932                 .muxsel         = { 2, 3, 1, 1 },
 933                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 934                 .gpiomute       = 0x1800,
 935                 .pll            = PLL_28,
 936                 .tuner_type     = UNSET,
 937                 .tuner_addr     = ADDR_UNSET,
 938                 .radio_addr     = ADDR_UNSET,
 939                 .has_radio      = 1,
 940         },
 941         [BTTV_BOARD_PXELVWPLTVPRO] = {
 942                 .name           = "Prolink PixelView PlayTV pro",
 943                 .video_inputs   = 3,
 944                 .audio_inputs   = 1,
 945                 .tuner          = 0,
 946                 .svhs           = 2,
 947                 .gpiomask       = 0xff,
 948                 .muxsel         = { 2, 3, 1, 1 },
 949                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 950                 .gpiomute       = 0x29,
 951                 .no_msp34xx     = 1,
 952                 .pll            = PLL_28,
 953                 .tuner_type     = UNSET,
 954                 .tuner_addr     = ADDR_UNSET,
 955                 .radio_addr     = ADDR_UNSET,
 956         },
 957         [BTTV_BOARD_MAGICTVIEW063] = {
 958                 .name           = "Askey CPH06X TView99",
 959                 .video_inputs   = 4,
 960                 .audio_inputs   = 1,
 961                 .tuner          = 0,
 962                 .svhs           = 2,
 963                 .gpiomask       = 0x551e00,
 964                 .muxsel         = { 2, 3, 1, 0 },
 965                 .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 966                 .gpiomute       = 0x551c00,
 967                 .needs_tvaudio  = 1,
 968                 .pll            = PLL_28,
 969                 .tuner_type     = TUNER_PHILIPS_PAL_I,
 970                 .tuner_addr     = ADDR_UNSET,
 971                 .radio_addr     = ADDR_UNSET,
 972                 .has_remote     = 1,
 973         },
 974         [BTTV_BOARD_PINNACLE] = {
 975                 .name           = "Pinnacle PCTV Studio/Rave",
 976                 .video_inputs   = 3,
 977                 .audio_inputs   = 1,
 978                 .tuner          = 0,
 979                 .svhs           = 2,
 980                 .gpiomask       = 0x03000F,
 981                 .muxsel         = { 2, 3, 1, 1 },
 982                 .gpiomux        = { 2, 0xd0001, 0, 0 },
 983                 .gpiomute       = 1,
 984                 .needs_tvaudio  = 0,
 985                 .pll            = PLL_28,
 986                 .tuner_type     = UNSET,
 987                 .tuner_addr     = ADDR_UNSET,
 988                 .radio_addr     = ADDR_UNSET,
 989         },
 990
 991         /* ---- card 0x28 ---------------------------------- */
 992         [BTTV_BOARD_STB2] = {
 993                 .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 994                 .video_inputs   = 3,
 995                 .audio_inputs   = 1,
 996                 .tuner          = 0,
 997                 .svhs           = 2,
 998                 .gpiomask       = 7,
 999                 .muxsel         = { 2, 3, 1, 1 },
1000                 .gpiomux        = { 4, 0, 2, 3 },
1001                 .gpiomute       = 1,
1002                 .no_msp34xx     = 1,
1003                 .needs_tvaudio  = 1,
1004                 .tuner_type     = TUNER_PHILIPS_NTSC,
1005                 .tuner_addr     = ADDR_UNSET,
1006                 .radio_addr     = ADDR_UNSET,
1007                 .pll            = PLL_28,
1008                 .has_radio      = 1,
1009         },
1010         [BTTV_BOARD_AVPHONE98] = {
1011                 .name           = "AVerMedia TVPhone 98",
1012                 .video_inputs   = 3,
1013                 .audio_inputs   = 4,
1014                 .tuner          = 0,
1015                 .svhs           = 2,
1016                 .gpiomask       = 15,
1017                 .muxsel         = { 2, 3, 1, 1 },
1018                 .gpiomux        = { 13, 4, 11, 7 },
1019                 .needs_tvaudio  = 1,
1020                 .pll            = PLL_28,
1021                 .tuner_type     = UNSET,
1022                 .tuner_addr     = ADDR_UNSET,
1023                 .radio_addr     = ADDR_UNSET,
1024                 .has_radio      = 1,
1025                 .audio_mode_gpio= avermedia_tvphone_audio,
1026         },
1027         [BTTV_BOARD_PV951] = {
1028                 .name           = "ProVideo PV951", /* pic16c54 */
1029                 .video_inputs   = 3,
1030                 .audio_inputs   = 1,
1031                 .tuner          = 0,
1032                 .svhs           = 2,
1033                 .gpiomask       = 0,
1034                 .muxsel         = { 2, 3, 1, 1},
1035                 .gpiomux        = { 0, 0, 0, 0},
1036                 .needs_tvaudio  = 1,
1037                 .no_msp34xx     = 1,
1038                 .pll            = PLL_28,
1039                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1040                 .tuner_addr     = ADDR_UNSET,
1041                 .radio_addr     = ADDR_UNSET,
1042         },
1043         [BTTV_BOARD_ONAIR_TV] = {
1044                 .name           = "Little OnAir TV",
1045                 .video_inputs   = 3,
1046                 .audio_inputs   = 1,
1047                 .tuner          = 0,
1048                 .svhs           = 2,
1049                 .gpiomask       = 0xe00b,
1050                 .muxsel         = { 2, 3, 1, 1 },
1051                 .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1052                 .gpiomute       = 0xff3ffc,
1053                 .no_msp34xx     = 1,
1054                 .tuner_type     = UNSET,
1055                 .tuner_addr     = ADDR_UNSET,
1056                 .radio_addr     = ADDR_UNSET,
1057         },
1058
1059         /* ---- card 0x2c ---------------------------------- */
1060         [BTTV_BOARD_SIGMA_TVII_FM] = {
1061                 .name           = "Sigma TVII-FM",
1062                 .video_inputs   = 2,
1063                 .audio_inputs   = 1,
1064                 .tuner          = 0,
1065                 .svhs           = UNSET,
1066                 .gpiomask       = 3,
1067                 .muxsel         = { 2, 3, 1, 1 },
1068                 .gpiomux        = { 1, 1, 0, 2 },
1069                 .gpiomute       = 3,
1070                 .no_msp34xx     = 1,
1071                 .pll            = PLL_NONE,
1072                 .tuner_type     = UNSET,
1073                 .tuner_addr     = ADDR_UNSET,
1074                 .radio_addr     = ADDR_UNSET,
1075         },
1076         [BTTV_BOARD_MATRIX_VISION2] = {
1077                 .name           = "MATRIX-Vision MV-Delta 2",
1078                 .video_inputs   = 5,
1079                 .audio_inputs   = 1,
1080                 .tuner          = UNSET,
1081                 .svhs           = 3,
1082                 .gpiomask       = 0,
1083                 .muxsel         = { 2, 3, 1, 0, 0 },
1084                 .gpiomux        = { 0 },
1085                 .no_msp34xx     = 1,
1086                 .pll            = PLL_28,
1087                 .tuner_type     = UNSET,
1088                 .tuner_addr     = ADDR_UNSET,
1089                 .radio_addr     = ADDR_UNSET,
1090         },
1091         [BTTV_BOARD_ZOLTRIX_GENIE] = {
1092                 .name           = "Zoltrix Genie TV/FM",
1093                 .video_inputs   = 3,
1094                 .audio_inputs   = 1,
1095                 .tuner          = 0,
1096                 .svhs           = 2,
1097                 .gpiomask       = 0xbcf03f,
1098                 .muxsel         = { 2, 3, 1, 1 },
1099                 .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1100                 .gpiomute       = 0xbcb03f,
1101                 .no_msp34xx     = 1,
1102                 .pll            = PLL_28,
1103                 .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1104                 .tuner_addr     = ADDR_UNSET,
1105                 .radio_addr     = ADDR_UNSET,
1106         },
1107         [BTTV_BOARD_TERRATVRADIO] = {
1108                 .name           = "Terratec TV/Radio+",
1109                 .video_inputs   = 3,
1110                 .audio_inputs   = 1,
1111                 .tuner          = 0,
1112                 .svhs           = 2,
1113                 .gpiomask       = 0x70000,
1114                 .muxsel         = { 2, 3, 1, 1 },
1115                 .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1116                 .gpiomute       = 0x40000,
1117                 .needs_tvaudio  = 1,
1118                 .no_msp34xx     = 1,
1119                 .pll            = PLL_35,
1120                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1121                 .tuner_addr     = ADDR_UNSET,
1122                 .radio_addr     = ADDR_UNSET,
1123                 .has_radio      = 1,
1124         },
1125
1126         /* ---- card 0x30 ---------------------------------- */
1127         [BTTV_BOARD_DYNALINK] = {
1128                 .name           = "Askey CPH03x/ Dynalink Magic TView",
1129                 .video_inputs   = 3,
1130                 .audio_inputs   = 1,
1131                 .tuner          = 0,
1132                 .svhs           = 2,
1133                 .gpiomask       = 15,
1134                 .muxsel         = { 2, 3, 1, 1 },
1135                 .gpiomux        = {2,0,0,0 },
1136                 .gpiomute       = 1,
1137                 .needs_tvaudio  = 1,
1138                 .pll            = PLL_28,
1139                 .tuner_type     = UNSET,
1140                 .tuner_addr     = ADDR_UNSET,
1141                 .radio_addr     = ADDR_UNSET,
1142         },
1143         [BTTV_BOARD_GVBCTV3PCI] = {
1144                 .name           = "IODATA GV-BCTV3/PCI",
1145                 .video_inputs   = 3,
1146                 .audio_inputs   = 1,
1147                 .tuner          = 0,
1148                 .svhs           = 2,
1149                 .gpiomask       = 0x010f00,
1150                 .muxsel         = {2, 3, 0, 0 },
1151                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1152                 .no_msp34xx     = 1,
1153                 .pll            = PLL_28,
1154                 .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1155                 .tuner_addr     = ADDR_UNSET,
1156                 .radio_addr     = ADDR_UNSET,
1157                 .audio_mode_gpio= gvbctv3pci_audio,
1158         },
1159         [BTTV_BOARD_PXELVWPLTVPAK] = {
1160                 .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1161                 .video_inputs   = 5,
1162                 .audio_inputs   = 1,
1163                 .tuner          = 0,
1164                 .svhs           = 3,
1165                 .gpiomask       = 0xAA0000,
1166                 .muxsel         = { 2,3,1,1,-1 },
1167                 .digital_mode   = DIGITAL_MODE_CAMERA,
1168                 .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1169                 .gpiomute       = 0xa8000,
1170                 .no_msp34xx     = 1,
1171                 .pll            = PLL_28,
1172                 .tuner_type     = TUNER_PHILIPS_PAL_I,
1173                 .tuner_addr     = ADDR_UNSET,
1174                 .radio_addr     = ADDR_UNSET,
1175                 .has_remote     = 1,
1176                 /* GPIO wiring: (different from Rev.4C !)
1177                         GPIO17: U4.A0 (first hef4052bt)
1178                         GPIO19: U4.A1
1179                         GPIO20: U5.A1 (second hef4052bt)
1180                         GPIO21: U4.nEN
1181                         GPIO22: BT832 Reset Line
1182                         GPIO23: A5,A0, U5,nEN
1183                 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1184                 */
1185         },
1186         [BTTV_BOARD_EAGLE] = {
1187                 .name           = "Eagle Wireless Capricorn2 (bt878A)",
1188                 .video_inputs   = 4,
1189                 .audio_inputs   = 1,
1190                 .tuner          = 0,
1191                 .svhs           = 2,
1192                 .gpiomask       = 7,
1193                 .muxsel         = { 2, 0, 1, 1 },
1194                 .gpiomux        = { 0, 1, 2, 3 },
1195                 .gpiomute       = 4,
1196                 .pll            = PLL_28,
1197                 .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1198                 .tuner_addr     = ADDR_UNSET,
1199                 .radio_addr     = ADDR_UNSET,
1200         },
1201
1202         /* ---- card 0x34 ---------------------------------- */
1203         [BTTV_BOARD_PINNACLEPRO] = {
1204                 /* David Härdeman <david@2gen.com> */
1205                 .name           = "Pinnacle PCTV Studio Pro",
1206                 .video_inputs   = 4,
1207                 .audio_inputs   = 1,
1208                 .tuner          = 0,
1209                 .svhs           = 3,
1210                 .gpiomask       = 0x03000F,
1211                 .muxsel         = { 2, 3, 1, 1 },
1212                 .gpiomux        = { 1, 0xd0001, 0, 0 },
1213                 .gpiomute       = 10,
1214                                 /* sound path (5 sources):
1215                                 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1216                                         0= ext. Audio IN
1217                                         1= from MUX2
1218                                         2= Mono TV sound from Tuner
1219                                         3= not connected
1220                                 MUX2 (mask 0x30000):
1221                                         0,2,3= from MSP34xx
1222                                         1= FM stereo Radio from Tuner */
1223                 .needs_tvaudio  = 0,
1224                 .pll            = PLL_28,
1225                 .tuner_type     = UNSET,
1226                 .tuner_addr     = ADDR_UNSET,
1227                 .radio_addr     = ADDR_UNSET,
1228         },
1229         [BTTV_BOARD_TVIEW_RDS_FM] = {
1230                 /* Claas Langbehn <claas@bigfoot.com>,
1231                 Sven Grothklags <sven@upb.de> */
1232                 .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1233                 .video_inputs   = 4,
1234                 .audio_inputs   = 3,
1235                 .tuner          = 0,
1236                 .svhs           = 2,
1237                 .gpiomask       = 0x1c,
1238                 .muxsel         = { 2, 3, 1, 1 },
1239                 .gpiomux        = { 0, 0, 0x10, 8 },
1240                 .gpiomute       = 4,
1241                 .needs_tvaudio  = 1,
1242                 .pll            = PLL_28,
1243                 .tuner_type     = TUNER_PHILIPS_PAL,
1244                 .tuner_addr     = ADDR_UNSET,
1245                 .radio_addr     = ADDR_UNSET,
1246                 .has_radio      = 1,
1247         },
1248         [BTTV_BOARD_LIFETEC_9415] = {
1249                 /* Tim Röstermundt <rosterm@uni-muenster.de>
1250                 in de.comp.os.unix.linux.hardware:
1251                         options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1252                         gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1253                         options tuner type=5 */
1254                 .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1255                 .video_inputs   = 4,
1256                 .audio_inputs   = 1,
1257                 .tuner          = 0,
1258                 .svhs           = 2,
1259                 .gpiomask       = 0x18e0,
1260                 .muxsel         = { 2, 3, 1, 1 },
1261                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1262                 .gpiomute       = 0x18e0,
1263                         /* For cards with tda9820/tda9821:
1264                                 0x0000: Tuner normal stereo
1265                                 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1266                                 0x0880: Tuner A2 stereo */
1267                 .pll            = PLL_28,
1268                 .tuner_type     = UNSET,
1269                 .tuner_addr     = ADDR_UNSET,
1270                 .radio_addr     = ADDR_UNSET,
1271         },
1272         [BTTV_BOARD_BESTBUY_EASYTV] = {
1273                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1274                 old Easy TV BT848 version (model CPH031) */
1275                 .name           = "Askey CPH031/ BESTBUY Easy TV",
1276                 .video_inputs   = 4,
1277                 .audio_inputs   = 1,
1278                 .tuner          = 0,
1279                 .svhs           = 2,
1280                 .gpiomask       = 0xF,
1281                 .muxsel         = { 2, 3, 1, 0 },
1282                 .gpiomux        = { 2, 0, 0, 0 },
1283                 .gpiomute       = 10,
1284                 .needs_tvaudio  = 0,
1285                 .pll            = PLL_28,
1286                 .tuner_type     = TUNER_TEMIC_PAL,
1287                 .tuner_addr     = ADDR_UNSET,
1288                 .radio_addr     = ADDR_UNSET,
1289         },
1290
1291         /* ---- card 0x38 ---------------------------------- */
1292         [BTTV_BOARD_FLYVIDEO_98FM] = {
1293                 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1294                 .name           = "Lifeview FlyVideo 98FM LR50",
1295                 .video_inputs   = 4,
1296                 .audio_inputs   = 3,
1297                 .tuner          = 0,
1298                 .svhs           = 2,
1299                 .gpiomask       = 0x1800,
1300                 .muxsel         = { 2, 3, 1, 1 },
1301                 .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1302                 .gpiomute       = 0x1800,
1303                 .pll            = PLL_28,
1304                 .tuner_type     = TUNER_PHILIPS_PAL,
1305                 .tuner_addr     = ADDR_UNSET,
1306                 .radio_addr     = ADDR_UNSET,
1307         },
1308                 /* This is the ultimate cheapo capture card
1309                 * just a BT848A on a small PCB!
1310                 * Steve Hosgood <steve@equiinet.com> */
1311         [BTTV_BOARD_GRANDTEC] = {
1312                 .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1313                 .video_inputs   = 2,
1314                 .audio_inputs   = 0,
1315                 .tuner          = UNSET,
1316                 .svhs           = 1,
1317                 .gpiomask       = 0,
1318                 .muxsel         = { 3, 1 },
1319                 .gpiomux        = { 0 },
1320                 .needs_tvaudio  = 0,
1321                 .no_msp34xx     = 1,
1322                 .pll            = PLL_35,
1323                 .tuner_type     = UNSET,
1324                 .tuner_addr     = ADDR_UNSET,
1325                 .radio_addr     = ADDR_UNSET,
1326         },
1327         [BTTV_BOARD_ASKEY_CPH060] = {
1328                 /* Daniel Herrington <daniel.herrington@home.com> */
1329                 .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1330                 .video_inputs   = 3,
1331                 .audio_inputs   = 1,
1332                 .tuner          = 0,
1333                 .svhs           = 2,
1334                 .gpiomask       = 0xe00,
1335                 .muxsel         = { 2, 3, 1, 1},
1336                 .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1337                 .gpiomute       = 0x800,
1338                 .needs_tvaudio  = 1,
1339                 .pll            = PLL_28,
1340                 .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1341                 .tuner_addr     = ADDR_UNSET,
1342                 .radio_addr     = ADDR_UNSET,
1343         },
1344         [BTTV_BOARD_ASKEY_CPH03X] = {
1345                 /* Matti Mottus <mottus@physic.ut.ee> */
1346                 .name           = "Askey CPH03x TV Capturer",
1347                 .video_inputs   = 4,
1348                 .audio_inputs   = 1,
1349                 .tuner          = 0,
1350                 .svhs           = 2,
1351                 .gpiomask       = 0x03000F,
1352                 .muxsel         = { 2, 3, 1, 0 },
1353                 .gpiomux        = { 2, 0, 0, 0 },
1354                 .gpiomute       = 1,
1355                 .pll            = PLL_28,
1356                 .tuner_type     = TUNER_TEMIC_PAL,
1357                 .tuner_addr     = ADDR_UNSET,
1358                 .radio_addr     = ADDR_UNSET,
1359         },
1360
1361         /* ---- card 0x3c ---------------------------------- */
1362         [BTTV_BOARD_MM100PCTV] = {
1363                 /* Philip Blundell <philb@gnu.org> */
1364                 .name           = "Modular Technology MM100PCTV",
1365                 .video_inputs   = 2,
1366                 .audio_inputs   = 2,
1367                 .tuner          = 0,
1368                 .svhs           = UNSET,
1369                 .gpiomask       = 11,
1370                 .muxsel         = { 2, 3, 1, 1 },
1371                 .gpiomux        = { 2, 0, 0, 1 },
1372                 .gpiomute       = 8,
1373                 .pll            = PLL_35,
1374                 .tuner_type     = TUNER_TEMIC_PAL,
1375                 .tuner_addr     = ADDR_UNSET,
1376                 .radio_addr     = ADDR_UNSET,
1377         },
1378         [BTTV_BOARD_GMV1] = {
1379                 /* Adrian Cox <adrian@humboldt.co.uk */
1380                 .name           = "AG Electronics GMV1",
1381                 .video_inputs   = 2,
1382                 .audio_inputs   = 0,
1383                 .tuner          = UNSET,
1384                 .svhs           = 1,
1385                 .gpiomask       = 0xF,
1386                 .muxsel         = { 2, 2 },
1387                 .gpiomux        = { },
1388                 .no_msp34xx     = 1,
1389                 .needs_tvaudio  = 0,
1390                 .pll            = PLL_28,
1391                 .tuner_type     = UNSET,
1392                 .tuner_addr     = ADDR_UNSET,
1393                 .radio_addr     = ADDR_UNSET,
1394         },
1395         [BTTV_BOARD_BESTBUY_EASYTV2] = {
1396                 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1397                 new Easy TV BT878 version (model CPH061)
1398                 special thanks to Informatica Mieres for providing the card */
1399                 .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1400                 .video_inputs   = 3,
1401                 .audio_inputs   = 2,
1402                 .tuner          = 0,
1403                 .svhs           = 2,
1404                 .gpiomask       = 0xFF,
1405                 .muxsel         = { 2, 3, 1, 0 },
1406                 .gpiomux        = { 1, 0, 4, 4 },
1407                 .gpiomute       = 9,
1408                 .needs_tvaudio  = 0,
1409                 .pll            = PLL_28,
1410                 .tuner_type     = TUNER_PHILIPS_PAL,
1411                 .tuner_addr     = ADDR_UNSET,
1412                 .radio_addr     = ADDR_UNSET,
1413         },
1414         [BTTV_BOARD_ATI_TVWONDER] = {
1415                 /* Lukas Gebauer <geby@volny.cz> */
1416                 .name           = "ATI TV-Wonder",
1417                 .video_inputs   = 3,
1418                 .audio_inputs   = 1,
1419                 .tuner          = 0,
1420                 .svhs           = 2,
1421                 .gpiomask       = 0xf03f,
1422                 .muxsel         = { 2, 3, 1, 0 },
1423                 .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1424                 .gpiomute       = 0xbffe,
1425                 .pll            = PLL_28,
1426                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1427                 .tuner_addr     = ADDR_UNSET,
1428                 .radio_addr     = ADDR_UNSET,
1429         },
1430
1431         /* ---- card 0x40 ---------------------------------- */
1432         [BTTV_BOARD_ATI_TVWONDERVE] = {
1433                 /* Lukas Gebauer <geby@volny.cz> */
1434                 .name           = "ATI TV-Wonder VE",
1435                 .video_inputs   = 2,
1436                 .audio_inputs   = 1,
1437                 .tuner          = 0,
1438                 .svhs           = UNSET,
1439                 .gpiomask       = 1,
1440                 .muxsel         = { 2, 3, 0, 1 },
1441                 .gpiomux        = { 0, 0, 1, 0 },
1442                 .no_msp34xx     = 1,
1443                 .pll            = PLL_28,
1444                 .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1445                 .tuner_addr     = ADDR_UNSET,
1446                 .radio_addr     = ADDR_UNSET,
1447         },
1448         [BTTV_BOARD_FLYVIDEO2000] = {
1449                 /* DeeJay <deejay@westel900.net (2000S) */
1450                 .name           = "Lifeview FlyVideo 2000S LR90",
1451                 .video_inputs   = 3,
1452                 .audio_inputs   = 3,
1453                 .tuner          = 0,
1454                 .svhs           = 2,
1455                 .gpiomask       = 0x18e0,
1456                 .muxsel         = { 2, 3, 0, 1 },
1457                                 /* Radio changed from 1e80 to 0x800 to make
1458                                 FlyVideo2000S in .hu happy (gm)*/
1459                                 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1460                 .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1461                 .gpiomute       = 0x1800,
1462                 .audio_mode_gpio= fv2000s_audio,
1463                 .no_msp34xx     = 1,
1464                 .no_tda9875     = 1,
1465                 .needs_tvaudio  = 1,
1466                 .pll            = PLL_28,
1467                 .tuner_type     = TUNER_PHILIPS_PAL,
1468                 .tuner_addr     = ADDR_UNSET,
1469                 .radio_addr     = ADDR_UNSET,
1470         },
1471         [BTTV_BOARD_TERRATVALUER] = {
1472                 .name           = "Terratec TValueRadio",
1473                 .video_inputs   = 3,
1474                 .audio_inputs   = 1,
1475                 .tuner          = 0,
1476                 .svhs           = 2,
1477                 .gpiomask       = 0xffff00,
1478                 .muxsel         = { 2, 3, 1, 1 },
1479                 .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1480                 .gpiomute       = 0x900,
1481                 .needs_tvaudio  = 1,
1482                 .pll            = PLL_28,
1483                 .tuner_type     = TUNER_PHILIPS_PAL,
1484                 .tuner_addr     = ADDR_UNSET,
1485                 .radio_addr     = ADDR_UNSET,
1486                 .has_radio      = 1,
1487         },
1488         [BTTV_BOARD_GVBCTV4PCI] = {
1489                 /* TANAKA Kei <peg00625@nifty.com> */
1490                 .name           = "IODATA GV-BCTV4/PCI",
1491                 .video_inputs   = 3,
1492                 .audio_inputs   = 1,
1493                 .tuner          = 0,
1494                 .svhs           = 2,
1495                 .gpiomask       = 0x010f00,
1496                 .muxsel         = {2, 3, 0, 0 },
1497                 .gpiomux        = {0x10000, 0, 0x10000, 0 },
1498                 .no_msp34xx     = 1,
1499                 .pll            = PLL_28,
1500                 .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1501                 .tuner_addr     = ADDR_UNSET,
1502                 .radio_addr     = ADDR_UNSET,
1503                 .audio_mode_gpio= gvbctv3pci_audio,
1504         },
1505
1506         /* ---- card 0x44 ---------------------------------- */
1507         [BTTV_BOARD_VOODOOTV_FM] = {
1508                 .name           = "3Dfx VoodooTV FM (Euro)",
1509                 /* try "insmod msp3400 simple=0" if you have
1510                 * sound problems with this card. */
1511                 .video_inputs   = 4,
1512                 .audio_inputs   = 1,
1513                 .tuner          = 0,
1514                 .svhs           = UNSET,
1515                 .gpiomask       = 0x4f8a00,
1516                 /* 0x100000: 1=MSP enabled (0=disable again)
1517                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1518                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1519                 .gpiomute       = 0x947fff,
1520                 /* tvtuner, radio,   external,internal, mute,  stereo
1521                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1522                 .muxsel         = { 2, 3 ,0 ,1 },
1523                 .tuner_type     = TUNER_MT2032,
1524                 .tuner_addr     = ADDR_UNSET,
1525                 .radio_addr     = ADDR_UNSET,
1526                 .pll            = PLL_28,
1527                 .has_radio      = 1,
1528         },
1529         [BTTV_BOARD_VOODOOTV_200] = {
1530                 .name           = "VoodooTV 200 (USA)",
1531                 /* try "insmod msp3400 simple=0" if you have
1532                 * sound problems with this card. */
1533                 .video_inputs   = 4,
1534                 .audio_inputs   = 1,
1535                 .tuner          = 0,
1536                 .svhs           = UNSET,
1537                 .gpiomask       = 0x4f8a00,
1538                 /* 0x100000: 1=MSP enabled (0=disable again)
1539                 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1540                 .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1541                 .gpiomute       = 0x947fff,
1542                 /* tvtuner, radio,   external,internal, mute,  stereo
1543                 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1544                 .muxsel         = { 2, 3 ,0 ,1 },
1545                 .tuner_type     = TUNER_MT2032,
1546                 .tuner_addr     = ADDR_UNSET,
1547                 .radio_addr     = ADDR_UNSET,
1548                 .pll            = PLL_28,
1549                 .has_radio      = 1,
1550         },
1551         [BTTV_BOARD_AIMMS] = {
1552                 /* Philip Blundell <pb@nexus.co.uk> */
1553                 .name           = "Active Imaging AIMMS",
1554                 .video_inputs   = 1,
1555                 .audio_inputs   = 0,
1556                 .tuner          = UNSET,
1557                 .tuner_type     = UNSET,
1558                 .tuner_addr     = ADDR_UNSET,
1559                 .radio_addr     = ADDR_UNSET,
1560                 .pll            = PLL_28,
1561                 .muxsel         = { 2 },
1562                 .gpiomask       = 0
1563         },
1564         [BTTV_BOARD_PV_BT878P_PLUS] = {
1565                 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1566                 .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1567                 .video_inputs   = 3,
1568                 .audio_inputs   = 4,
1569                 .tuner          = 0,
1570                 .svhs           = 2,
1571                 .gpiomask       = 15,
1572                 .muxsel         = { 2, 3, 1, 1 },
1573                 .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1574                 .gpiomute       = 13,
1575                 .needs_tvaudio  = 1,
1576                 .pll            = PLL_28,
1577                 .tuner_type     = TUNER_LG_PAL_I_FM,
1578                 .tuner_addr     = ADDR_UNSET,
1579                 .radio_addr     = ADDR_UNSET,
1580                 .has_remote     = 1,
1581                 /* GPIO wiring:
1582                         GPIO0: U4.A0 (hef4052bt)
1583                         GPIO1: U4.A1
1584                         GPIO2: U4.A1 (second hef4052bt)
1585                         GPIO3: U4.nEN, U5.A0, A5.nEN
1586                         GPIO8-15: vrd866b ?
1587                 */
1588         },
1589         [BTTV_BOARD_FLYVIDEO98EZ] = {
1590                 .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1591                 .video_inputs   = 4,
1592                 .audio_inputs   = 0,
1593                 .tuner          = UNSET,
1594                 .svhs           = 2,
1595                 .muxsel         = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */
1596                 .pll            = PLL_28,
1597                 .no_msp34xx     = 1,
1598                 .tuner_type     = UNSET,
1599                 .tuner_addr     = ADDR_UNSET,
1600                 .radio_addr     = ADDR_UNSET,
1601         },
1602
1603         /* ---- card 0x48 ---------------------------------- */
1604         [BTTV_BOARD_PV_BT878P_9B] = {
1605                 /* Dariusz Kowalewski <darekk@automex.pl> */
1606                 .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1607                 .video_inputs   = 4,
1608                 .audio_inputs   = 1,
1609                 .tuner          = 0,
1610                 .svhs           = 2,
1611                 .gpiomask       = 0x3f,
1612                 .muxsel         = { 2, 3, 1, 1 },
1613                 .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1614                 .gpiomute       = 0x09,
1615                 .needs_tvaudio  = 1,
1616                 .no_msp34xx     = 1,
1617                 .no_tda9875     = 1,
1618                 .pll            = PLL_28,
1619                 .tuner_type     = TUNER_PHILIPS_PAL,
1620                 .tuner_addr     = ADDR_UNSET,
1621                 .radio_addr     = ADDR_UNSET,
1622                 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1623                 .has_radio      = 1,  /* Note: not all cards have radio */
1624                 .has_remote     = 1,
1625                 /* GPIO wiring:
1626                         GPIO0: A0 hef4052
1627                         GPIO1: A1 hef4052
1628                         GPIO3: nEN hef4052
1629                         GPIO8-15: vrd866b
1630                         GPIO20,22,23: R30,R29,R28
1631                 */
1632         },
1633         [BTTV_BOARD_SENSORAY311] = {
1634                 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1635                 /* you must jumper JP5 for the card to work */
1636                 .name           = "Sensoray 311",
1637                 .video_inputs   = 5,
1638                 .audio_inputs   = 0,
1639                 .tuner          = UNSET,
1640                 .svhs           = 4,
1641                 .gpiomask       = 0,
1642                 .muxsel         = { 2, 3, 1, 0, 0 },
1643                 .gpiomux        = { 0 },
1644                 .needs_tvaudio  = 0,
1645                 .tuner_type     = UNSET,
1646                 .tuner_addr     = ADDR_UNSET,
1647                 .radio_addr     = ADDR_UNSET,
1648         },
1649         [BTTV_BOARD_RV605] = {
1650                 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1651                 .name           = "RemoteVision MX (RV605)",
1652                 .video_inputs   = 16,
1653                 .audio_inputs   = 0,
1654                 .tuner          = UNSET,
1655                 .svhs           = UNSET,
1656                 .gpiomask       = 0x00,
1657                 .gpiomask2      = 0x07ff,
1658                 .muxsel         = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
1659                                 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
1660                 .no_msp34xx     = 1,
1661                 .no_tda9875     = 1,
1662                 .tuner_type     = UNSET,
1663                 .tuner_addr     = ADDR_UNSET,
1664                 .radio_addr     = ADDR_UNSET,
1665                 .muxsel_hook    = rv605_muxsel,
1666         },
1667         [BTTV_BOARD_POWERCLR_MTV878] = {
1668                 .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1669                 .video_inputs   = 3,
1670                 .audio_inputs   = 2,
1671                 .tuner          = 0,
1672                 .svhs           = 2,
1673                 .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1674                 .muxsel         = { 2, 1, 1, },
1675                 .gpiomux        = { 0, 1, 2, 2 },
1676                 .gpiomute       = 4,
1677                 .needs_tvaudio  = 0,
1678                 .tuner_type     = TUNER_PHILIPS_PAL,
1679                 .tuner_addr     = ADDR_UNSET,
1680                 .radio_addr     = ADDR_UNSET,
1681                 .pll            = PLL_28,
1682                 .has_radio      = 1,
1683         },
1684
1685         /* ---- card 0x4c ---------------------------------- */
1686         [BTTV_BOARD_WINDVR] = {
1687                 /* Masaki Suzuki <masaki@btree.org> */
1688                 .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1689                 .video_inputs   = 3,
1690                 .audio_inputs   = 1,
1691                 .tuner          = 0,
1692                 .svhs           = 2,
1693                 .gpiomask       = 0x140007,
1694                 .muxsel         = { 2, 3, 1, 1 },
1695                 .gpiomux        = { 0, 1, 2, 3 },
1696                 .gpiomute       = 4,
1697                 .tuner_type     = TUNER_PHILIPS_NTSC,
1698                 .tuner_addr     = ADDR_UNSET,
1699                 .radio_addr     = ADDR_UNSET,
1700                 .audio_mode_gpio= windvr_audio,
1701         },
1702         [BTTV_BOARD_GRANDTEC_MULTI] = {
1703                 .name           = "GrandTec Multi Capture Card (Bt878)",
1704                 .video_inputs   = 4,
1705                 .audio_inputs   = 0,
1706                 .tuner          = UNSET,
1707                 .svhs           = UNSET,
1708                 .gpiomask       = 0,
1709                 .muxsel         = { 2, 3, 1, 0 },
1710                 .gpiomux        = { 0 },
1711                 .needs_tvaudio  = 0,
1712                 .no_msp34xx     = 1,
1713                 .pll            = PLL_28,
1714                 .tuner_type     = UNSET,
1715                 .tuner_addr     = ADDR_UNSET,
1716                 .radio_addr     = ADDR_UNSET,
1717         },
1718         [BTTV_BOARD_KWORLD] = {
1719                 .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1720                 .video_inputs   = 4,
1721                 .audio_inputs   = 3,
1722                 .tuner          = 0,
1723                 .svhs           = 2,
1724                 .gpiomask       = 7,
1725                 .muxsel         = { 2, 3, 1, 1 },   /* Tuner, SVid, SVHS, SVid to SVHS connector */
1726                 .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1727                                                 * This card lacks external Audio In, so we mute it on Ext. & Int.
1728                                                 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1729                                                 * This card lacks PCI subsystem ID, sigh.
1730                                                 * gpiomux =1: lower volume, 2+3: mute
1731                                                 * btwincap uses 0x80000/0x80003
1732                                                 */
1733                 .gpiomute       = 4,
1734                 .needs_tvaudio  = 0,
1735                 .no_msp34xx     = 1,
1736                 .pll            = PLL_28,
1737                 .tuner_type     = TUNER_PHILIPS_PAL,
1738                 .tuner_addr     = ADDR_UNSET,
1739                 .radio_addr     = ADDR_UNSET,
1740                 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1741                 radio signal strength indicators work fine. */
1742                 .has_radio      = 1,
1743                 /* GPIO Info:
1744                         GPIO0,1:   HEF4052 A0,A1
1745                         GPIO2:     HEF4052 nENABLE
1746                         GPIO3-7:   n.c.
1747                         GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1748                         GPIO14,15: ??
1749                         GPIO16-21: n.c.
1750                         GPIO22,23: ??
1751                         ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1752         },
1753         [BTTV_BOARD_DSP_TCVIDEO] = {
1754                 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1755                 .name           = "DSP Design TCVIDEO",
1756                 .video_inputs   = 4,
1757                 .svhs           = UNSET,
1758                 .muxsel         = { 2, 3, 1, 0 },
1759                 .pll            = PLL_28,
1760                 .tuner_type     = UNSET,
1761                 .tuner_addr     = ADDR_UNSET,
1762                 .radio_addr     = ADDR_UNSET,
1763         },
1764
1765                 /* ---- card 0x50 ---------------------------------- */
1766         [BTTV_BOARD_HAUPPAUGEPVR] = {
1767                 .name           = "Hauppauge WinTV PVR",
1768                 .video_inputs   = 4,
1769                 .audio_inputs   = 1,
1770                 .tuner          = 0,
1771                 .svhs           = 2,
1772                 .muxsel         = { 2, 0, 1, 1 },
1773                 .needs_tvaudio  = 1,
1774                 .pll            = PLL_28,
1775                 .tuner_type     = UNSET,
1776                 .tuner_addr     = ADDR_UNSET,
1777                 .radio_addr     = ADDR_UNSET,
1778
1779                 .gpiomask       = 7,
1780                 .gpiomux        = {7},
1781         },
1782         [BTTV_BOARD_GVBCTV5PCI] = {
1783                 .name           = "IODATA GV-BCTV5/PCI",
1784                 .video_inputs   = 3,
1785                 .audio_inputs   = 1,
1786                 .tuner          = 0,
1787                 .svhs           = 2,
1788                 .gpiomask       = 0x0f0f80,
1789                 .muxsel         = {2, 3, 1, 0 },
1790                 .gpiomux        = {0x030000, 0x010000, 0, 0 },
1791                 .gpiomute       = 0x020000,
1792                 .no_msp34xx     = 1,
1793                 .pll            = PLL_28,
1794                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
1795                 .tuner_addr     = ADDR_UNSET,
1796                 .radio_addr     = ADDR_UNSET,
1797                 .audio_mode_gpio= gvbctv5pci_audio,
1798                 .has_radio      = 1,
1799         },
1800         [BTTV_BOARD_OSPREY1x0] = {
1801                 .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1802                 .video_inputs   = 4,                  /* id-inputs-clock */
1803                 .audio_inputs   = 0,
1804                 .tuner          = UNSET,
1805                 .svhs           = 3,
1806                 .muxsel         = { 3, 2, 0, 1 },
1807                 .pll            = PLL_28,
1808                 .tuner_type     = UNSET,
1809                 .tuner_addr     = ADDR_UNSET,
1810                 .radio_addr     = ADDR_UNSET,
1811                 .no_msp34xx     = 1,
1812                 .no_tda9875     = 1,
1813                 .no_tda7432     = 1,
1814         },
1815         [BTTV_BOARD_OSPREY1x0_848] = {
1816                 .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1817                 .video_inputs   = 3,
1818                 .audio_inputs   = 0,
1819                 .tuner          = UNSET,
1820                 .svhs           = 2,
1821                 .muxsel         = { 2, 3, 1 },
1822                 .pll            = PLL_28,
1823                 .tuner_type     = UNSET,
1824                 .tuner_addr     = ADDR_UNSET,
1825                 .radio_addr     = ADDR_UNSET,
1826                 .no_msp34xx     = 1,
1827                 .no_tda9875     = 1,
1828                 .no_tda7432     = 1,
1829         },
1830
1831                 /* ---- card 0x54 ---------------------------------- */
1832         [BTTV_BOARD_OSPREY101_848] = {
1833                 .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1834                 .video_inputs   = 2,
1835                 .audio_inputs   = 0,
1836                 .tuner          = UNSET,
1837                 .svhs           = 1,
1838                 .muxsel         = { 3, 1 },
1839                 .pll            = PLL_28,
1840                 .tuner_type     = UNSET,
1841                 .tuner_addr     = ADDR_UNSET,
1842                 .radio_addr     = ADDR_UNSET,
1843                 .no_msp34xx     = 1,
1844                 .no_tda9875     = 1,
1845                 .no_tda7432     = 1,
1846         },
1847         [BTTV_BOARD_OSPREY1x1] = {
1848                 .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1849                 .video_inputs   = 1,
1850                 .audio_inputs   = 0,
1851                 .tuner          = UNSET,
1852                 .svhs           = UNSET,
1853                 .muxsel         = { 0 },
1854                 .pll            = PLL_28,
1855                 .tuner_type     = UNSET,
1856                 .tuner_addr     = ADDR_UNSET,
1857                 .radio_addr     = ADDR_UNSET,
1858                 .no_msp34xx     = 1,
1859                 .no_tda9875     = 1,
1860                 .no_tda7432     = 1,
1861         },
1862         [BTTV_BOARD_OSPREY1x1_SVID] = {
1863                 .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1864                 .video_inputs   = 2,
1865                 .audio_inputs   = 0,
1866                 .tuner          = UNSET,
1867                 .svhs           = 1,
1868                 .muxsel         = { 0, 1 },
1869                 .pll            = PLL_28,
1870                 .tuner_type     = UNSET,
1871                 .tuner_addr     = ADDR_UNSET,
1872                 .radio_addr     = ADDR_UNSET,
1873                 .no_msp34xx     = 1,
1874                 .no_tda9875     = 1,
1875                 .no_tda7432     = 1,
1876         },
1877         [BTTV_BOARD_OSPREY2xx] = {
1878                 .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1879                 .video_inputs   = 1,
1880                 .audio_inputs   = 1,
1881                 .tuner          = UNSET,
1882                 .svhs           = UNSET,
1883                 .muxsel         = { 0 },
1884                 .pll            = PLL_28,
1885                 .tuner_type     = UNSET,
1886                 .tuner_addr     = ADDR_UNSET,
1887                 .radio_addr     = ADDR_UNSET,
1888                 .no_msp34xx     = 1,
1889                 .no_tda9875     = 1,
1890                 .no_tda7432     = 1,
1891         },
1892
1893                 /* ---- card 0x58 ---------------------------------- */
1894         [BTTV_BOARD_OSPREY2x0_SVID] = {
1895                 .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1896                 .video_inputs   = 2,
1897                 .audio_inputs   = 1,
1898                 .tuner          = UNSET,
1899                 .svhs           = 1,
1900                 .muxsel         = { 0, 1 },
1901                 .pll            = PLL_28,
1902                 .tuner_type     = UNSET,
1903                 .tuner_addr     = ADDR_UNSET,
1904                 .radio_addr     = ADDR_UNSET,
1905                 .no_msp34xx     = 1,
1906                 .no_tda9875     = 1,
1907                 .no_tda7432     = 1,
1908         },
1909         [BTTV_BOARD_OSPREY2x0] = {
1910                 .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1911                 .video_inputs   = 2,
1912                 .audio_inputs   = 1,
1913                 .tuner          = UNSET,
1914                 .svhs           = 1,
1915                 .muxsel         = { 2, 3 },
1916                 .pll            = PLL_28,
1917                 .tuner_type     = UNSET,
1918                 .tuner_addr     = ADDR_UNSET,
1919                 .radio_addr     = ADDR_UNSET,
1920                 .no_msp34xx     = 1,
1921                 .no_tda9875     = 1,
1922                 .no_tda7432     = 1,
1923         },
1924         [BTTV_BOARD_OSPREY500] = {
1925                 .name           = "Osprey 500",   /* 500 */
1926                 .video_inputs   = 2,
1927                 .audio_inputs   = 1,
1928                 .tuner          = UNSET,
1929                 .svhs           = 1,
1930                 .muxsel         = { 2, 3 },
1931                 .pll            = PLL_28,
1932                 .tuner_type     = UNSET,
1933                 .tuner_addr     = ADDR_UNSET,
1934                 .radio_addr     = ADDR_UNSET,
1935                 .no_msp34xx     = 1,
1936                 .no_tda9875     = 1,
1937                 .no_tda7432     = 1,
1938         },
1939         [BTTV_BOARD_OSPREY540] = {
1940                 .name           = "Osprey 540",   /* 540 */
1941                 .video_inputs   = 4,
1942                 .audio_inputs   = 1,
1943                 .tuner          = UNSET,
1944                 .pll            = PLL_28,
1945                 .tuner_type     = UNSET,
1946                 .tuner_addr     = ADDR_UNSET,
1947                 .radio_addr     = ADDR_UNSET,
1948                 .no_msp34xx     = 1,
1949                 .no_tda9875     = 1,
1950                 .no_tda7432     = 1,
1951         },
1952
1953                 /* ---- card 0x5C ---------------------------------- */
1954         [BTTV_BOARD_OSPREY2000] = {
1955                 .name           = "Osprey 2000",  /* 2000 */
1956                 .video_inputs   = 2,
1957                 .audio_inputs   = 1,
1958                 .tuner          = UNSET,
1959                 .svhs           = 1,
1960                 .muxsel         = { 2, 3 },
1961                 .pll            = PLL_28,
1962                 .tuner_type     = UNSET,
1963                 .tuner_addr     = ADDR_UNSET,
1964                 .radio_addr     = ADDR_UNSET,
1965                 .no_msp34xx     = 1,
1966                 .no_tda9875     = 1,
1967                 .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1968         },
1969         [BTTV_BOARD_IDS_EAGLE] = {
1970                 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1971                 .name           = "IDS Eagle",
1972                 .video_inputs   = 4,
1973                 .audio_inputs   = 0,
1974                 .tuner          = UNSET,
1975                 .tuner_type     = UNSET,
1976                 .tuner_addr     = ADDR_UNSET,
1977                 .radio_addr     = ADDR_UNSET,
1978                 .svhs           = UNSET,
1979                 .gpiomask       = 0,
1980                 .muxsel         = { 0, 1, 2, 3 },
1981                 .muxsel_hook    = eagle_muxsel,
1982                 .no_msp34xx     = 1,
1983                 .no_tda9875     = 1,
1984                 .pll            = PLL_28,
1985         },
1986         [BTTV_BOARD_PINNACLESAT] = {
1987                 .name           = "Pinnacle PCTV Sat",
1988                 .video_inputs   = 2,
1989                 .audio_inputs   = 0,
1990                 .svhs           = 1,
1991                 .tuner          = UNSET,
1992                 .tuner_type     = UNSET,
1993                 .tuner_addr     = ADDR_UNSET,
1994                 .radio_addr     = ADDR_UNSET,
1995                 .no_msp34xx     = 1,
1996                 .no_tda9875     = 1,
1997                 .no_tda7432     = 1,
1998                 .muxsel         = { 3, 1 },
1999                 .pll            = PLL_28,
2000                 .no_gpioirq     = 1,
2001                 .has_dvb        = 1,
2002         },
2003         [BTTV_BOARD_FORMAC_PROTV] = {
2004                 .name           = "Formac ProTV II (bt878)",
2005                 .video_inputs   = 4,
2006                 .audio_inputs   = 1,
2007                 .tuner          = 0,
2008                 .svhs           = 3,
2009                 .gpiomask       = 2,
2010                 /* TV, Comp1, Composite over SVID con, SVID */
2011                 .muxsel         = { 2, 3, 1, 1 },
2012                 .gpiomux        = { 2, 2, 0, 0 },
2013                 .pll            = PLL_28,
2014                 .has_radio      = 1,
2015                 .tuner_type     = TUNER_PHILIPS_PAL,
2016                 .tuner_addr     = ADDR_UNSET,
2017                 .radio_addr     = ADDR_UNSET,
2018         /* sound routing:
2019                 GPIO=0x00,0x01,0x03: mute (?)
2020                 0x02: both TV and radio (tuner: FM1216/I)
2021                 The card has onboard audio connectors labeled "cdrom" and "board",
2022                 not soldered here, though unknown wiring.
2023                 Card lacks: external audio in, pci subsystem id.
2024         */
2025         },
2026
2027                 /* ---- card 0x60 ---------------------------------- */
2028         [BTTV_BOARD_MACHTV] = {
2029                 .name           = "MachTV",
2030                 .video_inputs   = 3,
2031                 .audio_inputs   = 1,
2032                 .tuner          = 0,
2033                 .svhs           = UNSET,
2034                 .gpiomask       = 7,
2035                 .muxsel         = { 2, 3, 1, 1},
2036                 .gpiomux        = { 0, 1, 2, 3},
2037                 .gpiomute       = 4,
2038                 .needs_tvaudio  = 1,
2039                 .tuner_type     = TUNER_PHILIPS_PAL,
2040                 .tuner_addr     = ADDR_UNSET,
2041                 .radio_addr     = ADDR_UNSET,
2042                 .pll            = PLL_28,
2043         },
2044         [BTTV_BOARD_EURESYS_PICOLO] = {
2045                 .name           = "Euresys Picolo",
2046                 .video_inputs   = 3,
2047                 .audio_inputs   = 0,
2048                 .tuner          = UNSET,
2049                 .svhs           = 2,
2050                 .gpiomask       = 0,
2051                 .no_msp34xx     = 1,
2052                 .no_tda9875     = 1,
2053                 .no_tda7432     = 1,
2054                 .muxsel         = { 2, 0, 1},
2055                 .pll            = PLL_28,
2056                 .tuner_type     = UNSET,
2057                 .tuner_addr     = ADDR_UNSET,
2058                 .radio_addr     = ADDR_UNSET,
2059         },
2060         [BTTV_BOARD_PV150] = {
2061                 /* Luc Van Hoeylandt <luc@e-magic.be> */
2062                 .name           = "ProVideo PV150", /* 0x4f */
2063                 .video_inputs   = 2,
2064                 .audio_inputs   = 0,
2065                 .tuner          = UNSET,
2066                 .svhs           = UNSET,
2067                 .gpiomask       = 0,
2068                 .muxsel         = { 2, 3 },
2069                 .gpiomux        = { 0 },
2070                 .needs_tvaudio  = 0,
2071                 .no_msp34xx     = 1,
2072                 .pll            = PLL_28,
2073                 .tuner_type     = UNSET,
2074                 .tuner_addr     = ADDR_UNSET,
2075                 .radio_addr     = ADDR_UNSET,
2076         },
2077         [BTTV_BOARD_AD_TVK503] = {
2078                 /* Hiroshi Takekawa <sian@big.or.jp> */
2079                 /* This card lacks subsystem ID */
2080                 .name           = "AD-TVK503", /* 0x63 */
2081                 .video_inputs   = 4,
2082                 .audio_inputs   = 1,
2083                 .tuner          = 0,
2084                 .svhs           = 2,
2085                 .gpiomask       = 0x001e8007,
2086                 .muxsel         = { 2, 3, 1, 0 },
2087                 /*                  Tuner, Radio, external, internal, off,  on */
2088                 .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
2089                 .gpiomute       = 0x0f,
2090                 .needs_tvaudio  = 0,
2091                 .no_msp34xx     = 1,
2092                 .pll            = PLL_28,
2093                 .tuner_type     = TUNER_PHILIPS_NTSC,
2094                 .tuner_addr     = ADDR_UNSET,
2095                 .radio_addr     = ADDR_UNSET,
2096                 .audio_mode_gpio= adtvk503_audio,
2097         },
2098
2099                 /* ---- card 0x64 ---------------------------------- */
2100         [BTTV_BOARD_HERCULES_SM_TV] = {
2101                 .name           = "Hercules Smart TV Stereo",
2102                 .video_inputs   = 4,
2103                 .audio_inputs   = 1,
2104                 .tuner          = 0,
2105                 .svhs           = 2,
2106                 .gpiomask       = 0x00,
2107                 .muxsel         = { 2, 3, 1, 1 },
2108                 .needs_tvaudio  = 1,
2109                 .no_msp34xx     = 1,
2110                 .pll            = PLL_28,
2111                 .tuner_type     = TUNER_PHILIPS_PAL,
2112                 .tuner_addr     = ADDR_UNSET,
2113                 .radio_addr     = ADDR_UNSET,
2114                 /* Notes:
2115                 - card lacks subsystem ID
2116                 - stereo variant w/ daughter board with tda9874a @0xb0
2117                 - Audio Routing:
2118                         always from tda9874 independent of GPIO (?)
2119                         external line in: unknown
2120                 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
2121                         hef4053 (instead 4052) for unknown function
2122                 */
2123         },
2124         [BTTV_BOARD_PACETV] = {
2125                 .name           = "Pace TV & Radio Card",
2126                 .video_inputs   = 4,
2127                 .audio_inputs   = 1,
2128                 .tuner          = 0,
2129                 .svhs           = 2,
2130                 .muxsel         = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */
2131                 .gpiomask       = 0,
2132                 .no_tda9875     = 1,
2133                 .no_tda7432     = 1,
2134                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2135                 .tuner_addr     = ADDR_UNSET,
2136                 .radio_addr     = ADDR_UNSET,
2137                 .has_radio      = 1,
2138                 .pll            = PLL_28,
2139                 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
2140                 only internal line out: (4pin header) RGGL
2141                 Radio must be decoded by msp3410d (not routed through)*/
2142                 /*
2143                 .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
2144                 */
2145         },
2146         [BTTV_BOARD_IVC200] = {
2147                 /* Chris Willing <chris@vislab.usyd.edu.au> */
2148                 .name           = "IVC-200",
2149                 .video_inputs   = 1,
2150                 .audio_inputs   = 0,
2151                 .tuner          = UNSET,
2152                 .tuner_type     = UNSET,
2153                 .tuner_addr     = ADDR_UNSET,
2154                 .radio_addr     = ADDR_UNSET,
2155                 .svhs           = UNSET,
2156                 .gpiomask       = 0xdf,
2157                 .muxsel         = { 2 },
2158                 .pll            = PLL_28,
2159         },
2160         [BTTV_BOARD_XGUARD] = {
2161                 .name           = "Grand X-Guard / Trust 814PCI",
2162                 .video_inputs   = 16,
2163                 .audio_inputs   = 0,
2164                 .tuner          = UNSET,
2165                 .svhs           = UNSET,
2166                 .tuner_type     = TUNER_ABSENT,
2167                 .tuner_addr     = ADDR_UNSET,
2168                 .radio_addr     = ADDR_UNSET,
2169                 .gpiomask2      = 0xff,
2170                 .muxsel         = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
2171                 .muxsel_hook    = xguard_muxsel,
2172                 .no_msp34xx     = 1,
2173                 .no_tda9875     = 1,
2174                 .no_tda7432     = 1,
2175                 .pll            = PLL_28,
2176         },
2177
2178                 /* ---- card 0x68 ---------------------------------- */
2179         [BTTV_BOARD_NEBULA_DIGITV] = {
2180                 .name           = "Nebula Electronics DigiTV",
2181                 .video_inputs   = 1,
2182                 .tuner          = UNSET,
2183                 .svhs           = UNSET,
2184                 .muxsel         = { 2, 3, 1, 0 },
2185                 .no_msp34xx     = 1,
2186                 .no_tda9875     = 1,
2187                 .no_tda7432     = 1,
2188                 .pll            = PLL_28,
2189                 .tuner_type     = UNSET,
2190                 .tuner_addr     = ADDR_UNSET,
2191                 .radio_addr     = ADDR_UNSET,
2192                 .has_dvb        = 1,
2193                 .has_remote     = 1,
2194                 .gpiomask       = 0x1b,
2195                 .no_gpioirq     = 1,
2196         },
2197         [BTTV_BOARD_PV143] = {
2198                 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2199                 .name           = "ProVideo PV143",
2200                 .video_inputs   = 4,
2201                 .audio_inputs   = 0,
2202                 .tuner          = UNSET,
2203                 .svhs           = UNSET,
2204                 .gpiomask       = 0,
2205                 .muxsel         = { 2, 3, 1, 0 },
2206                 .gpiomux        = { 0 },
2207                 .needs_tvaudio  = 0,
2208                 .no_msp34xx     = 1,
2209                 .pll            = PLL_28,
2210                 .tuner_type     = UNSET,
2211                 .tuner_addr     = ADDR_UNSET,
2212                 .radio_addr     = ADDR_UNSET,
2213         },
2214         [BTTV_BOARD_VD009X1_MINIDIN] = {
2215                 /* M.Klahr@phytec.de */
2216                 .name           = "PHYTEC VD-009-X1 MiniDIN (bt878)",
2217                 .video_inputs   = 4,
2218                 .audio_inputs   = 0,
2219                 .tuner          = UNSET, /* card has no tuner */
2220                 .svhs           = 3,
2221                 .gpiomask       = 0x00,
2222                 .muxsel         = { 2, 3, 1, 0 },
2223                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2224                 .needs_tvaudio  = 1,
2225                 .pll            = PLL_28,
2226                 .tuner_type     = UNSET,
2227                 .tuner_addr     = ADDR_UNSET,
2228                 .radio_addr     = ADDR_UNSET,
2229         },
2230         [BTTV_BOARD_VD009X1_COMBI] = {
2231                 .name           = "PHYTEC VD-009-X1 Combi (bt878)",
2232                 .video_inputs   = 4,
2233                 .audio_inputs   = 0,
2234                 .tuner          = UNSET, /* card has no tuner */
2235                 .svhs           = 3,
2236                 .gpiomask       = 0x00,
2237                 .muxsel         = { 2, 3, 1, 1 },
2238                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2239                 .needs_tvaudio  = 1,
2240                 .pll            = PLL_28,
2241                 .tuner_type     = UNSET,
2242                 .tuner_addr     = ADDR_UNSET,
2243                 .radio_addr     = ADDR_UNSET,
2244         },
2245
2246                 /* ---- card 0x6c ---------------------------------- */
2247         [BTTV_BOARD_VD009_MINIDIN] = {
2248                 .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2249                 .video_inputs   = 10,
2250                 .audio_inputs   = 0,
2251                 .tuner          = UNSET, /* card has no tuner */
2252                 .svhs           = 9,
2253                 .gpiomask       = 0x00,
2254                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2255                                         via the upper nibble of muxsel. here: used for
2256                                         xternal video-mux */
2257                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
2258                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2259                 .needs_tvaudio  = 1,
2260                 .pll            = PLL_28,
2261                 .tuner_type     = UNSET,
2262                 .tuner_addr     = ADDR_UNSET,
2263                 .radio_addr     = ADDR_UNSET,
2264         },
2265         [BTTV_BOARD_VD009_COMBI] = {
2266                 .name           = "PHYTEC VD-009 Combi (bt878)",
2267                 .video_inputs   = 10,
2268                 .audio_inputs   = 0,
2269                 .tuner          = UNSET, /* card has no tuner */
2270                 .svhs           = 9,
2271                 .gpiomask       = 0x00,
2272                 .gpiomask2      = 0x03, /* gpiomask2 defines the bits used to switch audio
2273                                         via the upper nibble of muxsel. here: used for
2274                                         xternal video-mux */
2275                 .muxsel         = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
2276                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2277                 .needs_tvaudio  = 1,
2278                 .pll            = PLL_28,
2279                 .tuner_type     = UNSET,
2280                 .tuner_addr     = ADDR_UNSET,
2281                 .radio_addr     = ADDR_UNSET,
2282         },
2283         [BTTV_BOARD_IVC100] = {
2284                 .name           = "IVC-100",
2285                 .video_inputs   = 4,
2286                 .audio_inputs   = 0,
2287                 .tuner          = UNSET,
2288                 .tuner_type     = UNSET,
2289                 .tuner_addr     = ADDR_UNSET,
2290                 .radio_addr     = ADDR_UNSET,
2291                 .svhs           = UNSET,
2292                 .gpiomask       = 0xdf,
2293                 .muxsel         = { 2, 3, 1, 0 },
2294                 .pll            = PLL_28,
2295         },
2296         [BTTV_BOARD_IVC120] = {
2297                 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2298                 .name           = "IVC-120G",
2299                 .video_inputs   = 16,
2300                 .audio_inputs   = 0,    /* card has no audio */
2301                 .tuner          = UNSET,   /* card has no tuner */
2302                 .tuner_type     = UNSET,
2303                 .tuner_addr     = ADDR_UNSET,
2304                 .radio_addr     = ADDR_UNSET,
2305                 .svhs           = UNSET,   /* card has no svhs */
2306                 .needs_tvaudio  = 0,
2307                 .no_msp34xx     = 1,
2308                 .no_tda9875     = 1,
2309                 .no_tda7432     = 1,
2310                 .gpiomask       = 0x00,
2311                 .muxsel         = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
2312                                 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
2313                 .muxsel_hook    = ivc120_muxsel,
2314                 .pll            = PLL_28,
2315         },
2316
2317                 /* ---- card 0x70 ---------------------------------- */
2318         [BTTV_BOARD_PC_HDTV] = {
2319                 .name           = "pcHDTV HD-2000 TV",
2320                 .video_inputs   = 4,
2321                 .audio_inputs   = 1,
2322                 .tuner          = 0,
2323                 .svhs           = 2,
2324                 .muxsel         = { 2, 3, 1, 0 },
2325                 .tuner_type     = TUNER_PHILIPS_ATSC,
2326                 .tuner_addr     = ADDR_UNSET,
2327                 .radio_addr     = ADDR_UNSET,
2328                 .has_dvb        = 1,
2329         },
2330         [BTTV_BOARD_TWINHAN_DST] = {
2331                 .name           = "Twinhan DST + clones",
2332                 .no_msp34xx     = 1,
2333                 .no_tda9875     = 1,
2334                 .no_tda7432     = 1,
2335                 .tuner_type     = TUNER_ABSENT,
2336                 .tuner_addr     = ADDR_UNSET,
2337                 .radio_addr     = ADDR_UNSET,
2338                 .no_video       = 1,
2339                 .has_dvb        = 1,
2340         },
2341         [BTTV_BOARD_WINFASTVC100] = {
2342                 .name           = "Winfast VC100",
2343                 .video_inputs   = 3,
2344                 .audio_inputs   = 0,
2345                 .svhs           = 1,
2346                 .tuner          = UNSET,
2347                 .muxsel         = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */
2348                 .no_msp34xx     = 1,
2349                 .no_tda9875     = 1,
2350                 .no_tda7432     = 1,
2351                 .tuner_type     = TUNER_ABSENT,
2352                 .tuner_addr     = ADDR_UNSET,
2353                 .radio_addr     = ADDR_UNSET,
2354                 .pll            = PLL_28,
2355         },
2356         [BTTV_BOARD_TEV560] = {
2357                 .name           = "Teppro TEV-560/InterVision IV-560",
2358                 .video_inputs   = 3,
2359                 .audio_inputs   = 1,
2360                 .tuner          = 0,
2361                 .svhs           = 2,
2362                 .gpiomask       = 3,
2363                 .muxsel         = { 2, 3, 1, 1 },
2364                 .gpiomux        = { 1, 1, 1, 1 },
2365                 .needs_tvaudio  = 1,
2366                 .tuner_type     = TUNER_PHILIPS_PAL,
2367                 .tuner_addr     = ADDR_UNSET,
2368                 .radio_addr     = ADDR_UNSET,
2369                 .pll            = PLL_35,
2370         },
2371
2372                 /* ---- card 0x74 ---------------------------------- */
2373         [BTTV_BOARD_SIMUS_GVC1100] = {
2374                 .name           = "SIMUS GVC1100",
2375                 .video_inputs   = 4,
2376                 .audio_inputs   = 0,
2377                 .tuner          = UNSET,
2378                 .svhs           = UNSET,
2379                 .tuner_type     = UNSET,
2380                 .tuner_addr     = ADDR_UNSET,
2381                 .radio_addr     = ADDR_UNSET,
2382                 .pll            = PLL_28,
2383                 .muxsel         = { 2, 2, 2, 2 },
2384                 .gpiomask       = 0x3F,
2385                 .muxsel_hook    = gvc1100_muxsel,
2386         },
2387         [BTTV_BOARD_NGSTV_PLUS] = {
2388                 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2389                 .name           = "NGS NGSTV+",
2390                 .video_inputs   = 3,
2391                 .tuner          = 0,
2392                 .svhs           = 2,
2393                 .gpiomask       = 0x008007,
2394                 .muxsel         = { 2, 3, 0, 0 },
2395                 .gpiomux        = { 0, 0, 0, 0 },
2396                 .gpiomute       = 0x000003,
2397                 .pll            = PLL_28,
2398                 .tuner_type     = TUNER_PHILIPS_PAL,
2399                 .tuner_addr     = ADDR_UNSET,
2400                 .radio_addr     = ADDR_UNSET,
2401                 .has_remote     = 1,
2402         },
2403         [BTTV_BOARD_LMLBT4] = {
2404                 /* http://linuxmedialabs.com */
2405                 .name           = "LMLBT4",
2406                 .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2407                 .audio_inputs   = 0,
2408                 .tuner          = UNSET,
2409                 .svhs           = UNSET,
2410                 .muxsel         = { 2, 3, 1, 0 },
2411                 .no_msp34xx     = 1,
2412                 .no_tda9875     = 1,
2413                 .no_tda7432     = 1,
2414                 .needs_tvaudio  = 0,
2415                 .tuner_type     = UNSET,
2416                 .tuner_addr     = ADDR_UNSET,
2417                 .radio_addr     = ADDR_UNSET,
2418         },
2419         [BTTV_BOARD_TEKRAM_M205] = {
2420                 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2421                 .name           = "Tekram M205 PRO",
2422                 .video_inputs   = 3,
2423                 .audio_inputs   = 1,
2424                 .tuner          = 0,
2425                 .tuner_type     = TUNER_PHILIPS_PAL,
2426                 .tuner_addr     = ADDR_UNSET,
2427                 .radio_addr     = ADDR_UNSET,
2428                 .svhs           = 2,
2429                 .needs_tvaudio  = 0,
2430                 .gpiomask       = 0x68,
2431                 .muxsel         = { 2, 3, 1 },
2432                 .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2433                 .pll            = PLL_28,
2434         },
2435
2436                 /* ---- card 0x78 ---------------------------------- */
2437         [BTTV_BOARD_CONTVFMI] = {
2438                 /* Javier Cendan Ares <jcendan@lycos.es> */
2439                 /* bt878 TV + FM without subsystem ID */
2440                 .name           = "Conceptronic CONTVFMi",
2441                 .video_inputs   = 3,
2442                 .audio_inputs   = 1,
2443                 .tuner          = 0,
2444                 .svhs           = 2,
2445                 .gpiomask       = 0x008007,
2446                 .muxsel         = { 2, 3, 1, 1 },
2447                 .gpiomux        = { 0, 1, 2, 2 },
2448                 .gpiomute       = 3,
2449                 .needs_tvaudio  = 0,
2450                 .pll            = PLL_28,
2451                 .tuner_type     = TUNER_PHILIPS_PAL,
2452                 .tuner_addr     = ADDR_UNSET,
2453                 .radio_addr     = ADDR_UNSET,
2454                 .has_remote     = 1,
2455                 .has_radio      = 1,
2456         },
2457         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2458                 /*Eric DEBIEF <debief@telemsa.com>*/
2459                 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2460                 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2461                 /*0x79 in bttv.h*/
2462                 .name           = "Euresys Picolo Tetra",
2463                 .video_inputs   = 4,
2464                 .audio_inputs   = 0,
2465                 .tuner          = UNSET,
2466                 .svhs           = UNSET,
2467                 .gpiomask       = 0,
2468                 .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2469                 .no_msp34xx     = 1,
2470                 .no_tda9875     = 1,
2471                 .no_tda7432     = 1,
2472                 .muxsel         = {2,2,2,2},/*878A input is always MUX0, see above.*/
2473                 .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2474                 .pll            = PLL_28,
2475                 .needs_tvaudio  = 0,
2476                 .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2477                 .tuner_type     = UNSET,
2478                 .tuner_addr     = ADDR_UNSET,
2479                 .radio_addr     = ADDR_UNSET,
2480         },
2481         [BTTV_BOARD_SPIRIT_TV] = {
2482                 /* Spirit TV Tuner from http://spiritmodems.com.au */
2483                 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2484                 .name           = "Spirit TV Tuner",
2485                 .video_inputs   = 3,
2486                 .audio_inputs   = 1,
2487                 .tuner          = 0,
2488                 .svhs           = 2,
2489                 .gpiomask       = 0x0000000f,
2490                 .muxsel         = { 2, 1, 1 },
2491                 .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2492                 .tuner_type     = TUNER_TEMIC_PAL,
2493                 .tuner_addr     = ADDR_UNSET,
2494                 .radio_addr     = ADDR_UNSET,
2495                 .no_msp34xx     = 1,
2496                 .no_tda9875     = 1,
2497         },
2498         [BTTV_BOARD_AVDVBT_771] = {
2499                 /* Wolfram Joost <wojo@frokaschwei.de> */
2500                 .name           = "AVerMedia AVerTV DVB-T 771",
2501                 .video_inputs   = 2,
2502                 .svhs           = 1,
2503                 .tuner          = UNSET,
2504                 .tuner_type     = TUNER_ABSENT,
2505                 .tuner_addr     = ADDR_UNSET,
2506                 .radio_addr     = ADDR_UNSET,
2507                 .muxsel         = { 3 , 3 },
2508                 .no_msp34xx     = 1,
2509                 .no_tda9875     = 1,
2510                 .no_tda7432     = 1,
2511                 .pll            = PLL_28,
2512                 .has_dvb        = 1,
2513                 .no_gpioirq     = 1,
2514                 .has_remote     = 1,
2515         },
2516                 /* ---- card 0x7c ---------------------------------- */
2517         [BTTV_BOARD_AVDVBT_761] = {
2518                 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2519                 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2520                 .name           = "AverMedia AverTV DVB-T 761",
2521                 .video_inputs   = 2,
2522                 .tuner          = UNSET,
2523                 .svhs           = 1,
2524                 .muxsel         = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */
2525                 .no_msp34xx     = 1,
2526                 .no_tda9875     = 1,
2527                 .no_tda7432     = 1,
2528                 .pll            = PLL_28,
2529                 .tuner_type     = UNSET,
2530                 .tuner_addr     = ADDR_UNSET,
2531                 .radio_addr     = ADDR_UNSET,
2532                 .has_dvb        = 1,
2533                 .no_gpioirq     = 1,
2534                 .has_remote     = 1,
2535         },
2536         [BTTV_BOARD_MATRIX_VISIONSQ] = {
2537                 /* andre.schwarz@matrix-vision.de */
2538                 .name             = "MATRIX Vision Sigma-SQ",
2539                 .video_inputs     = 16,
2540                 .audio_inputs     = 0,
2541                 .tuner            = UNSET,
2542                 .svhs             = UNSET,
2543                 .gpiomask         = 0x0,
2544                 .muxsel           = { 2, 2, 2, 2, 2, 2, 2, 2,
2545                                 3, 3, 3, 3, 3, 3, 3, 3 },
2546                 .muxsel_hook      = sigmaSQ_muxsel,
2547                 .gpiomux          = { 0 },
2548                 .no_msp34xx       = 1,
2549                 .pll              = PLL_28,
2550                 .tuner_type       = UNSET,
2551                 .tuner_addr       = ADDR_UNSET,
2552                 .radio_addr     = ADDR_UNSET,
2553         },
2554         [BTTV_BOARD_MATRIX_VISIONSLC] = {
2555                 /* andre.schwarz@matrix-vision.de */
2556                 .name             = "MATRIX Vision Sigma-SLC",
2557                 .video_inputs     = 4,
2558                 .audio_inputs     = 0,
2559                 .tuner            = UNSET,
2560                 .svhs             = UNSET,
2561                 .gpiomask         = 0x0,
2562                 .muxsel           = { 2, 2, 2, 2 },
2563                 .muxsel_hook      = sigmaSLC_muxsel,
2564                 .gpiomux          = { 0 },
2565                 .no_msp34xx       = 1,
2566                 .pll              = PLL_28,
2567                 .tuner_type       = UNSET,
2568                 .tuner_addr       = ADDR_UNSET,
2569                 .radio_addr     = ADDR_UNSET,
2570         },
2571                 /* BTTV_BOARD_APAC_VIEWCOMP */
2572         [BTTV_BOARD_APAC_VIEWCOMP] = {
2573                 /* Attila Kondoros <attila.kondoros@chello.hu> */
2574                 /* bt878 TV + FM 0x00000000 subsystem ID */
2575                 .name           = "APAC Viewcomp 878(AMAX)",
2576                 .video_inputs   = 2,
2577                 .audio_inputs   = 1,
2578                 .tuner          = 0,
2579                 .svhs           = UNSET,
2580                 .gpiomask       = 0xFF,
2581                 .muxsel         = { 2, 3, 1, 1 },
2582                 .gpiomux        = { 2, 0, 0, 0 },
2583                 .gpiomute       = 10,
2584                 .needs_tvaudio  = 0,
2585                 .pll            = PLL_28,
2586                 .tuner_type     = TUNER_PHILIPS_PAL,
2587                 .tuner_addr     = ADDR_UNSET,
2588                 .radio_addr     = ADDR_UNSET,
2589                 .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2590                 .has_radio      = 1,   /* not every card has radio */
2591         },
2592
2593                 /* ---- card 0x80 ---------------------------------- */
2594         [BTTV_BOARD_DVICO_DVBT_LITE] = {
2595                 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2596                 .name           = "DViCO FusionHDTV DVB-T Lite",
2597                 .tuner          = UNSET,
2598                 .no_msp34xx     = 1,
2599                 .no_tda9875     = 1,
2600                 .no_tda7432     = 1,
2601                 .pll            = PLL_28,
2602                 .no_video       = 1,
2603                 .has_dvb        = 1,
2604                 .tuner_type     = UNSET,
2605                 .tuner_addr     = ADDR_UNSET,
2606                 .radio_addr     = ADDR_UNSET,
2607         },
2608         [BTTV_BOARD_VGEAR_MYVCD] = {
2609                 /* Steven <photon38@pchome.com.tw> */
2610                 .name           = "V-Gear MyVCD",
2611                 .video_inputs   = 3,
2612                 .audio_inputs   = 1,
2613                 .tuner          = 0,
2614                 .svhs           = 2,
2615                 .gpiomask       = 0x3f,
2616                 .muxsel         = {2, 3, 1, 0 },
2617                 .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2618                 .gpiomute       = 0x31,
2619                 .no_msp34xx     = 1,
2620                 .pll            = PLL_28,
2621                 .tuner_type     = TUNER_PHILIPS_NTSC_M,
2622                 .tuner_addr     = ADDR_UNSET,
2623                 .radio_addr     = ADDR_UNSET,
2624                 .has_radio      = 0,
2625         },
2626         [BTTV_BOARD_SUPER_TV] = {
2627                 /* Rick C <cryptdragoon@gmail.com> */
2628                 .name           = "Super TV Tuner",
2629                 .video_inputs   = 4,
2630                 .audio_inputs   = 1,
2631                 .tuner          = 0,
2632                 .svhs           = 2,
2633                 .muxsel         = { 2, 3, 1, 0 },
2634                 .tuner_type     = TUNER_PHILIPS_NTSC,
2635                 .tuner_addr     = ADDR_UNSET,
2636                 .radio_addr     = ADDR_UNSET,
2637                 .gpiomask       = 0x008007,
2638                 .gpiomux        = { 0, 0x000001,0,0 },
2639                 .needs_tvaudio  = 1,
2640                 .has_radio      = 1,
2641         },
2642         [BTTV_BOARD_TIBET_CS16] = {
2643                 /* Chris Fanning <video4linux@haydon.net> */
2644                 .name           = "Tibet Systems 'Progress DVR' CS16",
2645                 .video_inputs   = 16,
2646                 .audio_inputs   = 0,
2647                 .tuner          = UNSET,
2648                 .svhs           = UNSET,
2649                 .muxsel         = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
2650                 .pll            = PLL_28,
2651                 .no_msp34xx     = 1,
2652                 .no_tda9875     = 1,
2653                 .no_tda7432     = 1,
2654                 .tuner_type     = UNSET,
2655                 .tuner_addr     = ADDR_UNSET,
2656                 .radio_addr     = ADDR_UNSET,
2657                 .muxsel_hook    = tibetCS16_muxsel,
2658         },
2659         [BTTV_BOARD_KODICOM_4400R] = {
2660                 /* Bill Brack <wbrack@mmm.com.hk> */
2661                 /*
2662                 * Note that, because of the card's wiring, the "master"
2663                 * BT878A chip (i.e. the one which controls the analog switch
2664                 * and must use this card type) is the 2nd one detected.  The
2665                 * other 3 chips should use card type 0x85, whose description
2666                 * follows this one.  There is a EEPROM on the card (which is
2667                 * connected to the I2C of one of those other chips), but is
2668                 * not currently handled.  There is also a facility for a
2669                 * "monitor", which is also not currently implemented.
2670                 */
2671                 .name           = "Kodicom 4400R (master)",
2672                 .video_inputs   = 16,
2673                 .audio_inputs   = 0,
2674                 .tuner          = UNSET,
2675                 .tuner_type     = UNSET,
2676                 .tuner_addr     = ADDR_UNSET,
2677                 .radio_addr     = ADDR_UNSET,
2678                 .svhs           = UNSET,
2679                 /* GPIO bits 0-9 used for analog switch:
2680                 *   00 - 03:    camera selector
2681                 *   04 - 06:    channel (controller) selector
2682                 *   07: data (1->on, 0->off)
2683                 *   08: strobe
2684                 *   09: reset
2685                 * bit 16 is input from sync separator for the channel
2686                 */
2687                 .gpiomask       = 0x0003ff,
2688                 .no_gpioirq     = 1,
2689                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2690                 .pll            = PLL_28,
2691                 .no_msp34xx     = 1,
2692                 .no_tda7432     = 1,
2693                 .no_tda9875     = 1,
2694                 .muxsel_hook    = kodicom4400r_muxsel,
2695         },
2696         [BTTV_BOARD_KODICOM_4400R_SL] = {
2697                 /* Bill Brack <wbrack@mmm.com.hk> */
2698                 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2699                 * one which controls the analog switch, and must use the card type)
2700                 * is the 2nd one detected.  The other 3 chips should use this card
2701                 * type
2702                 */
2703                 .name           = "Kodicom 4400R (slave)",
2704                 .video_inputs   = 16,
2705                 .audio_inputs   = 0,
2706                 .tuner          = UNSET,
2707                 .tuner_type     = UNSET,
2708                 .tuner_addr     = ADDR_UNSET,
2709                 .radio_addr     = ADDR_UNSET,
2710                 .svhs           = UNSET,
2711                 .gpiomask       = 0x010000,
2712                 .no_gpioirq     = 1,
2713                 .muxsel         = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
2714                 .pll            = PLL_28,
2715                 .no_msp34xx     = 1,
2716                 .no_tda7432     = 1,
2717                 .no_tda9875     = 1,
2718                 .muxsel_hook    = kodicom4400r_muxsel,
2719         },
2720                 /* ---- card 0x86---------------------------------- */
2721         [BTTV_BOARD_ADLINK_RTV24] = {
2722                 /* Michael Henson <mhenson@clarityvi.com> */
2723                 /* Adlink RTV24 with special unlock codes */
2724                 .name           = "Adlink RTV24",
2725                 .video_inputs   = 4,
2726                 .audio_inputs   = 1,
2727                 .tuner          = 0,
2728                 .svhs           = 2,
2729                 .muxsel         = { 2, 3, 1, 0 },
2730                 .tuner_type     = UNSET,
2731                 .tuner_addr     = ADDR_UNSET,
2732                 .radio_addr     = ADDR_UNSET,
2733                 .pll            = PLL_28,
2734         },
2735                 /* ---- card 0x87---------------------------------- */
2736         [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2737                 /* Michael Krufky <mkrufky@m1k.net> */
2738                 .name           = "DViCO FusionHDTV 5 Lite",
2739                 .tuner          = 0,
2740                 .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2741                 .tuner_addr     = ADDR_UNSET,
2742                 .radio_addr     = ADDR_UNSET,
2743                 .video_inputs   = 3,
2744                 .audio_inputs   = 1,
2745                 .svhs           = 2,
2746                 .muxsel         = { 2, 3, 1 },
2747                 .gpiomask       = 0x00e00007,
2748                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2749                 .gpiomute       = 0x00c00007,
2750                 .no_msp34xx     = 1,
2751                 .no_tda9875     = 1,
2752                 .no_tda7432     = 1,
2753                 .has_dvb        = 1,
2754         },
2755                 /* ---- card 0x88---------------------------------- */
2756         [BTTV_BOARD_ACORP_Y878F] = {
2757                 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2758                 .name           = "Acorp Y878F",
2759                 .video_inputs   = 3,
2760                 .audio_inputs   = 1,
2761                 .tuner          = 0,
2762                 .svhs           = 2,
2763                 .gpiomask       = 0x01fe00,
2764                 .muxsel         = { 2, 3, 1, 1 },
2765                 .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2766                 .gpiomute       = 0x002000,
2767                 .needs_tvaudio  = 1,
2768                 .pll            = PLL_28,
2769                 .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2770                 .tuner_addr     = 0xc1 >>1,
2771                 .radio_addr     = 0xc1 >>1,
2772                 .has_radio      = 1,
2773         },
2774                 /* ---- card 0x89 ---------------------------------- */
2775         [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2776                 .name           = "Conceptronic CTVFMi v2",
2777                 .video_inputs   = 3,
2778                 .audio_inputs   = 1,
2779                 .tuner          = 0,
2780                 .svhs           = 2,
2781                 .gpiomask       = 0x001c0007,
2782                 .muxsel         = { 2, 3, 1, 1 },
2783                 .gpiomux        = { 0, 1, 2, 2 },
2784                 .gpiomute       = 3,
2785                 .needs_tvaudio  = 0,
2786                 .pll            = PLL_28,
2787                 .tuner_type     = TUNER_TENA_9533_DI,
2788                 .tuner_addr     = ADDR_UNSET,
2789                 .radio_addr     = ADDR_UNSET,
2790                 .has_remote     = 1,
2791                 .has_radio      = 1,
2792         },
2793                 /* ---- card 0x8a ---------------------------------- */
2794         [BTTV_BOARD_PV_BT878P_2E] = {
2795                 .name          = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2796                 .video_inputs  = 5,
2797                 .audio_inputs  = 1,
2798                 .tuner         = 0,
2799                 .svhs          = 3,
2800                 .gpiomask      = 0x01fe00,
2801                 .muxsel        = { 2,3,1,1,-1 },
2802                 .digital_mode  = DIGITAL_MODE_CAMERA,
2803                 .gpiomux       = { 0x00400, 0x10400, 0x04400, 0x80000 },
2804                 .gpiomute      = 0x12400,
2805                 .no_msp34xx    = 1,
2806                 .pll           = PLL_28,
2807                 .tuner_type    = TUNER_LG_PAL_FM,
2808                 .tuner_addr     = ADDR_UNSET,
2809                 .radio_addr     = ADDR_UNSET,
2810                 .has_remote    = 1,
2811         },
2812                 /* ---- card 0x8b ---------------------------------- */
2813         [BTTV_BOARD_PV_M4900] = {
2814                 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2815                 .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2816                 .video_inputs   = 3,
2817                 .audio_inputs   = 1,
2818                 .tuner          = 0,
2819                 .svhs           = 2,
2820                 .gpiomask       = 0x3f,
2821                 .muxsel         = { 2, 3, 1, 1 },
2822                 .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2823                 .gpiomute       = 0x29,
2824                 .no_msp34xx     = 1,
2825                 .pll            = PLL_28,
2826                 .tuner_type     = TUNER_YMEC_TVF_5533MF,
2827                 .tuner_addr     = ADDR_UNSET,
2828                 .radio_addr     = ADDR_UNSET,
2829                 .has_radio      = 1,
2830                 .has_remote     = 1,
2831         },
2832                 /* ---- card 0x8c ---------------------------------- */
2833         /* Has four Bt878 chips behind a PCI bridge, each chip has:
2834              one external BNC composite input (mux 2)
2835              three internal composite inputs (unknown muxes)
2836              an 18-bit stereo A/D (CS5331A), which has:
2837                one external stereo unblanced (RCA) audio connection
2838                one (or 3?) internal stereo balanced (XLR) audio connection
2839                input is selected via gpio to a 14052B mux
2840                  (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2841                gain is controlled via an X9221A chip on the I2C bus @0x28
2842                sample rate is controlled via gpio to an MK1413S
2843                  (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2844              There is neither a tuner nor an svideo input. */
2845         [BTTV_BOARD_OSPREY440]  = {
2846                 .name           = "Osprey 440",
2847                 .video_inputs   = 4,
2848                 .audio_inputs   = 2, /* this is meaningless */
2849                 .tuner          = UNSET,
2850                 .svhs           = UNSET,
2851                 .muxsel         = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */
2852                 .gpiomask       = 0x303,
2853                 .gpiomute       = 0x000, /* int + 32kHz */
2854                 .gpiomux        = { 0, 0, 0x000, 0x100},
2855                 .pll            = PLL_28,
2856                 .tuner_type     = UNSET,
2857                 .tuner_addr     = ADDR_UNSET,
2858                 .radio_addr     = ADDR_UNSET,
2859                 .no_msp34xx     = 1,
2860                 .no_tda9875     = 1,
2861                 .no_tda7432     = 1,
2862         },
2863                 /* ---- card 0x8d ---------------------------------- */
2864         [BTTV_BOARD_ASOUND_SKYEYE] = {
2865                 .name           = "Asound Skyeye PCTV",
2866                 .video_inputs   = 3,
2867                 .audio_inputs   = 1,
2868                 .tuner          = 0,
2869                 .svhs           = 2,
2870                 .gpiomask       = 15,
2871                 .muxsel         = { 2, 3, 1, 1 },
2872                 .gpiomux        = { 2, 0, 0, 0 },
2873                 .gpiomute       = 1,
2874                 .needs_tvaudio  = 1,
2875                 .pll            = PLL_28,
2876                 .tuner_type     = TUNER_PHILIPS_NTSC,
2877                 .tuner_addr     = ADDR_UNSET,
2878                 .radio_addr     = ADDR_UNSET,
2879         },
2880                 /* ---- card 0x8e ---------------------------------- */
2881         [BTTV_BOARD_SABRENT_TVFM] = {
2882                 .name           = "Sabrent TV-FM (bttv version)",
2883                 .video_inputs   = 3,
2884                 .audio_inputs   = 1,
2885                 .tuner          = 0,
2886                 .svhs           = 2,
2887                 .gpiomask       = 0x108007,
2888                 .muxsel         = { 2, 3, 1, 1 },
2889                 .gpiomux        = { 100000, 100002, 100002, 100000 },
2890                 .no_msp34xx     = 1,
2891                 .no_tda9875     = 1,
2892                 .no_tda7432     = 1,
2893                 .pll            = PLL_28,
2894                 .tuner_type     = TUNER_TNF_5335MF,
2895                 .tuner_addr     = ADDR_UNSET,
2896                 .has_radio      = 1,
2897         },
2898         /* ---- card 0x8f ---------------------------------- */
2899         [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2900                 .name           = "Hauppauge ImpactVCB (bt878)",
2901                 .video_inputs   = 4,
2902                 .audio_inputs   = 0,
2903                 .tuner          = UNSET,
2904                 .svhs           = UNSET,
2905                 .gpiomask       = 0x0f, /* old: 7 */
2906                 .muxsel         = { 0, 1, 3, 2 }, /* Composite 0-3 */
2907                 .no_msp34xx     = 1,
2908                 .no_tda9875     = 1,
2909                 .no_tda7432     = 1,
2910                 .tuner_type     = UNSET,
2911                 .tuner_addr     = ADDR_UNSET,
2912                 .radio_addr     = ADDR_UNSET,
2913         },
2914         [BTTV_BOARD_MACHTV_MAGICTV] = {
2915                 /* Julian Calaby <julian.calaby@gmail.com>
2916                  * Slightly different from original MachTV definition (0x60)
2917
2918                  * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2919                  * stuffs up remote chip. Bug is a pin on the jaecs is not set
2920                  * properly (methinks) causing no keyup bits being set */
2921
2922                 .name           = "MagicTV", /* rebranded MachTV */
2923                 .video_inputs   = 3,
2924                 .audio_inputs   = 1,
2925                 .tuner          = 0,
2926                 .svhs           = 2,
2927                 .gpiomask       = 7,
2928                 .muxsel         = { 2, 3, 1, 1 },
2929                 .gpiomux        = { 0, 1, 2, 3 },
2930                 .gpiomute       = 4,
2931                 .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2932                 .tuner_addr     = ADDR_UNSET,
2933                 .radio_addr     = ADDR_UNSET,
2934                 .pll            = PLL_28,
2935                 .has_radio      = 1,
2936                 .has_remote     = 1,
2937         },
2938         [BTTV_BOARD_SSAI_SECURITY] = {
2939                 .name           = "SSAI Security Video Interface",
2940                 .video_inputs   = 4,
2941                 .audio_inputs   = 0,
2942                 .tuner          = UNSET,
2943                 .svhs           = UNSET,
2944                 .muxsel         = { 0, 1, 2, 3 },
2945                 .tuner_type     = UNSET,
2946                 .tuner_addr     = ADDR_UNSET,
2947                 .radio_addr     = ADDR_UNSET,
2948         },
2949         [BTTV_BOARD_SSAI_ULTRASOUND] = {
2950                 .name           = "SSAI Ultrasound Video Interface",
2951                 .video_inputs   = 2,
2952                 .audio_inputs   = 0,
2953                 .tuner          = UNSET,
2954                 .svhs           = 1,
2955                 .muxsel         = { 2, 0, 1, 3 },
2956                 .tuner_type     = UNSET,
2957                 .tuner_addr     = ADDR_UNSET,
2958                 .radio_addr     = ADDR_UNSET,
2959         },
2960         /* ---- card 0x94---------------------------------- */
2961         [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2962                 .name           = "DViCO FusionHDTV 2",
2963                 .tuner          = 0,
2964                 .tuner_type     = TUNER_PHILIPS_ATSC, /* FCV1236D */
2965                 .tuner_addr     = ADDR_UNSET,
2966                 .radio_addr     = ADDR_UNSET,
2967                 .video_inputs   = 3,
2968                 .audio_inputs   = 1,
2969                 .svhs           = 2,
2970                 .muxsel         = { 2, 3, 1 },
2971                 .gpiomask       = 0x00e00007,
2972                 .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2973                 .gpiomute       = 0x00c00007,
2974                 .no_msp34xx     = 1,
2975                 .no_tda9875     = 1,
2976                 .no_tda7432     = 1,
2977         },
2978         /* ---- card 0x95---------------------------------- */
2979         [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2980                 .name           = "Typhoon TV-Tuner PCI (50684)",
2981                 .video_inputs   = 3,
2982                 .audio_inputs   = 1,
2983                 .tuner          = 0,
2984                 .svhs           = 2,
2985                 .gpiomask       = 0x3014f,
2986                 .muxsel         = { 2, 3, 1, 1 },
2987                 .gpiomux        = { 0x20001,0x10001, 0, 0 },
2988                 .gpiomute       = 10,
2989                 .needs_tvaudio  = 1,
2990                 .pll            = PLL_28,
2991                 .tuner_type     = TUNER_PHILIPS_PAL_I,
2992                 .tuner_addr     = ADDR_UNSET,
2993                 .radio_addr     = ADDR_UNSET,
2994         },
2995 };
2996
2997 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2998
2999 /* ----------------------------------------------------------------------- */
3000
3001 static unsigned char eeprom_data[256];
3002
3003 /*
3004  * identify card
3005  */
3006 void __devinit bttv_idcard(struct bttv *btv)
3007 {
3008         unsigned int gpiobits;
3009         int i,type;
3010         unsigned short tmp;
3011
3012         /* read PCI subsystem ID */
3013         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
3014         btv->cardid = tmp << 16;
3015         pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
3016         btv->cardid |= tmp;
3017
3018         if (0 != btv->cardid && 0xffffffff != btv->cardid) {
3019                 /* look for the card */
3020                 for (type = -1, i = 0; cards[i].id != 0; i++)
3021                         if (cards[i].id  == btv->cardid)
3022                                 type = i;
3023
3024                 if (type != -1) {
3025                         /* found it */
3026                         printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
3027                                "PCI subsystem ID is %04x:%04x\n",
3028                                btv->c.nr,cards[type].name,cards[type].cardnr,
3029                                btv->cardid & 0xffff,
3030                                (btv->cardid >> 16) & 0xffff);
3031                         btv->c.type = cards[type].cardnr;
3032                 } else {
3033                         /* 404 */
3034                         printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
3035                                btv->c.nr, btv->cardid & 0xffff,
3036                                (btv->cardid >> 16) & 0xffff);
3037                         printk(KERN_DEBUG "please mail id, board name and "
3038                                "the correct card= insmod option to video4linux-list@redhat.com\n");
3039                 }
3040         }
3041
3042         /* let the user override the autodetected type */
3043         if (card[btv->c.nr] < bttv_num_tvcards)
3044                 btv->c.type=card[btv->c.nr];
3045
3046         /* print which card config we are using */
3047         printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
3048                bttv_tvcards[btv->c.type].name, btv->c.type,
3049                card[btv->c.nr] < bttv_num_tvcards
3050                ? "insmod option" : "autodetected");
3051
3052         /* overwrite gpio stuff ?? */
3053         if (UNSET == audioall && UNSET == audiomux[0])
3054                 return;
3055
3056         if (UNSET != audiomux[0]) {
3057                 gpiobits = 0;
3058                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3059                         bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
3060                         gpiobits |= audiomux[i];
3061                 }
3062         } else {
3063                 gpiobits = audioall;
3064                 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3065                         bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
3066                 }
3067         }
3068         bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
3069         printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
3070                btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
3071         for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
3072                 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
3073         }
3074         printk("\n");
3075 }
3076
3077 /*
3078  * (most) board specific initialisations goes here
3079  */
3080
3081 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3082 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3083 {
3084         int type = -1;
3085
3086         if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3087                 type = BTTV_BOARD_MODTEC_205;
3088         else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3089                 type = BTTV_BOARD_EURESYS_PICOLO;
3090         else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3091                 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3092
3093         if (-1 != type) {
3094                 btv->c.type = type;
3095                 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3096                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3097         }
3098 }
3099
3100 static void flyvideo_gpio(struct bttv *btv)
3101 {
3102         int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
3103         int tuner=UNSET,ttype;
3104
3105         gpio_inout(0xffffff, 0);
3106         udelay(8);  /* without this we would see the 0x1800 mask */
3107         gpio = gpio_read();
3108         /* FIXME: must restore OUR_EN ??? */
3109
3110         /* all cards provide GPIO info, some have an additional eeprom
3111          * LR50: GPIO coding can be found lower right CP1 .. CP9
3112          *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3113          *       GPIO14-12: n.c.
3114          * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3115
3116          * lowest 3 bytes are remote control codes (no handshake needed)
3117          * xxxFFF: No remote control chip soldered
3118          * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3119          * Note: Some bits are Audio_Mask !
3120          */
3121         ttype=(gpio&0x0f0000)>>16;
3122         switch(ttype) {
3123         case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
3124                 break;
3125         case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
3126                 break;
3127         case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3128                 break;
3129         case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
3130                 break;
3131                 case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3132                 break;
3133         default:
3134                 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3135         }
3136
3137         has_remote          =   gpio & 0x800000;
3138         has_radio           =   gpio & 0x400000;
3139         /*   unknown                   0x200000;
3140          *   unknown2                  0x100000; */
3141         is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3142         has_tda9820_tda9821 = !(gpio & 0x004000);
3143         is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3144         /*
3145          * gpio & 0x001000    output bit for audio routing */
3146
3147         if(is_capture_only)
3148                 tuner = TUNER_ABSENT; /* No tuner present */
3149
3150         printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3151                btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
3152         printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3153                 btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
3154                 is_capture_only?"yes":"no ");
3155
3156         if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3157                 btv->tuner_type = tuner;
3158         btv->has_radio = has_radio;
3159
3160         /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3161          * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3162          * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3163         if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
3164         /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3165 }
3166
3167 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3168                                14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3169 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3170                                1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3171
3172 static void miro_pinnacle_gpio(struct bttv *btv)
3173 {
3174         int id,msp,gpio;
3175         char *info;
3176
3177         gpio_inout(0xffffff, 0);
3178         gpio = gpio_read();
3179         id   = ((gpio>>10) & 63) -1;
3180         msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3181         if (id < 32) {
3182                 btv->tuner_type = miro_tunermap[id];
3183                 if (0 == (gpio & 0x20)) {
3184                         btv->has_radio = 1;
3185                         if (!miro_fmtuner[id]) {
3186                                 btv->has_matchbox = 1;
3187                                 btv->mbox_we    = (1<<6);
3188                                 btv->mbox_most  = (1<<7);
3189                                 btv->mbox_clk   = (1<<8);
3190                                 btv->mbox_data  = (1<<9);
3191                                 btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3192                         }
3193                 } else {
3194                         btv->has_radio = 0;
3195                 }
3196                 if (-1 != msp) {
3197                         if (btv->c.type == BTTV_BOARD_MIRO)
3198                                 btv->c.type = BTTV_BOARD_MIROPRO;
3199                         if (btv->c.type == BTTV_BOARD_PINNACLE)
3200                                 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3201                 }
3202                 printk(KERN_INFO
3203                        "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3204                        btv->c.nr, id+1, btv->tuner_type,
3205                        !btv->has_radio ? "no" :
3206                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3207                        (-1 == msp) ? "no" : "yes");
3208         } else {
3209                 /* new cards with microtune tuner */
3210                 id = 63 - id;
3211                 btv->has_radio = 0;
3212                 switch (id) {
3213                 case 1:
3214                         info = "PAL / mono";
3215                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3216                         break;
3217                 case 2:
3218                         info = "PAL+SECAM / stereo";
3219                         btv->has_radio = 1;
3220                         btv->tda9887_conf = TDA9887_QSS;
3221                         break;
3222                 case 3:
3223                         info = "NTSC / stereo";
3224                         btv->has_radio = 1;
3225                         btv->tda9887_conf = TDA9887_QSS;
3226                         break;
3227                 case 4:
3228                         info = "PAL+SECAM / mono";
3229                         btv->tda9887_conf = TDA9887_QSS;
3230                         break;
3231                 case 5:
3232                         info = "NTSC / mono";
3233                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3234                         break;
3235                 case 6:
3236                         info = "NTSC / stereo";
3237                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3238                         break;
3239                 case 7:
3240                         info = "PAL / stereo";
3241                         btv->tda9887_conf = TDA9887_INTERCARRIER;
3242                         break;
3243                 default:
3244                         info = "oops: unknown card";
3245                         break;
3246                 }
3247                 if (-1 != msp)
3248                         btv->c.type = BTTV_BOARD_PINNACLEPRO;
3249                 printk(KERN_INFO
3250                        "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3251                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3252                 btv->tuner_type = TUNER_MT2032;
3253         }
3254 }
3255
3256 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3257 #define LM1882_SYNC_DRIVE     0x200000L
3258
3259 static void init_ids_eagle(struct bttv *btv)
3260 {
3261         gpio_inout(0xffffff,0xFFFF37);
3262         gpio_write(0x200020);
3263
3264         /* flash strobe inverter ?! */
3265         gpio_write(0x200024);
3266
3267         /* switch sync drive off */
3268         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3269
3270         /* set BT848 muxel to 2 */
3271         btaor((2)<<5, ~(2<<5), BT848_IFORM);
3272 }
3273
3274 /* Muxsel helper for the IDS Eagle.
3275  * the eagles does not use the standard muxsel-bits but
3276  * has its own multiplexer */
3277 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3278 {
3279         btaor((2)<<5, ~(3<<5), BT848_IFORM);
3280         gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
3281
3282         /* composite */
3283         /* set chroma ADC to sleep */
3284         btor(BT848_ADC_C_SLEEP, BT848_ADC);
3285         /* set to composite video */
3286         btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3287         btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3288
3289         /* switch sync drive off */
3290         gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3291 }
3292
3293 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3294 {
3295         static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3296         gpio_write(masks[input%4]);
3297 }
3298
3299 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3300    alarms output
3301
3302    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3303    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3304
3305    IN - sensor inputs, INx - sensor inputs and TI XORed together
3306    O1,O2,O3 - alarm outputs (relays)
3307
3308    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3309
3310 */
3311
3312 static void init_lmlbt4x(struct bttv *btv)
3313 {
3314         printk(KERN_DEBUG "LMLBT4x init\n");
3315         btwrite(0x000000, BT848_GPIO_REG_INP);
3316         gpio_inout(0xffffff, 0x0006C0);
3317         gpio_write(0x000000);
3318 }
3319
3320 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3321 {
3322         unsigned int inmux = input % 8;
3323         gpio_inout( 0xf, 0xf );
3324         gpio_bits( 0xf, inmux );
3325 }
3326
3327 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3328 {
3329         unsigned int inmux = input % 4;
3330         gpio_inout( 3<<9, 3<<9 );
3331         gpio_bits( 3<<9, inmux<<9 );
3332 }
3333
3334 /* ----------------------------------------------------------------------- */
3335
3336 static void bttv_reset_audio(struct bttv *btv)
3337 {
3338         /*
3339          * BT878A has a audio-reset register.
3340          * 1. This register is an audio reset function but it is in
3341          *    function-0 (video capture) address space.
3342          * 2. It is enough to do this once per power-up of the card.
3343          * 3. There is a typo in the Conexant doc -- it is not at
3344          *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3345          * --//Shrikumar 030609
3346          */
3347         if (btv->id != 878)
3348                 return;
3349
3350         if (bttv_debug)
3351                 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3352         btwrite((1<<7), 0x058);
3353         udelay(10);
3354         btwrite(     0, 0x058);
3355 }
3356
3357 /* initialization part one -- before registering i2c bus */
3358 void __devinit bttv_init_card1(struct bttv *btv)
3359 {
3360         switch (btv->c.type) {
3361         case BTTV_BOARD_HAUPPAUGE:
3362         case BTTV_BOARD_HAUPPAUGE878:
3363                 boot_msp34xx(btv,5);
3364                 break;
3365         case BTTV_BOARD_VOODOOTV_200:
3366         case BTTV_BOARD_VOODOOTV_FM:
3367                 boot_msp34xx(btv,20);
3368                 break;
3369         case BTTV_BOARD_AVERMEDIA98:
3370                 boot_msp34xx(btv,11);
3371                 break;
3372         case BTTV_BOARD_HAUPPAUGEPVR:
3373                 pvr_boot(btv);
3374                 break;
3375         case BTTV_BOARD_TWINHAN_DST:
3376         case BTTV_BOARD_AVDVBT_771:
3377         case BTTV_BOARD_PINNACLESAT:
3378                 btv->use_i2c_hw = 1;
3379                 break;
3380         case BTTV_BOARD_ADLINK_RTV24:
3381                 init_RTV24( btv );
3382                 break;
3383
3384         }
3385         if (!bttv_tvcards[btv->c.type].has_dvb)
3386                 bttv_reset_audio(btv);
3387 }
3388
3389 /* initialization part two -- after registering i2c bus */
3390 void __devinit bttv_init_card2(struct bttv *btv)
3391 {
3392         int addr=ADDR_UNSET;
3393
3394         btv->tuner_type = UNSET;
3395
3396         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3397                 bttv_readee(btv,eeprom_data,0xa0);
3398                 identify_by_eeprom(btv,eeprom_data);
3399         }
3400
3401         switch (btv->c.type) {
3402         case BTTV_BOARD_MIRO:
3403         case BTTV_BOARD_MIROPRO:
3404         case BTTV_BOARD_PINNACLE:
3405         case BTTV_BOARD_PINNACLEPRO:
3406                 /* miro/pinnacle */
3407                 miro_pinnacle_gpio(btv);
3408                 break;
3409         case BTTV_BOARD_FLYVIDEO_98:
3410         case BTTV_BOARD_MAXI:
3411         case BTTV_BOARD_LIFE_FLYKIT:
3412         case BTTV_BOARD_FLYVIDEO:
3413         case BTTV_BOARD_TYPHOON_TVIEW:
3414         case BTTV_BOARD_CHRONOS_VS2:
3415         case BTTV_BOARD_FLYVIDEO_98FM:
3416         case BTTV_BOARD_FLYVIDEO2000:
3417         case BTTV_BOARD_FLYVIDEO98EZ:
3418         case BTTV_BOARD_CONFERENCETV:
3419         case BTTV_BOARD_LIFETEC_9415:
3420                 flyvideo_gpio(btv);
3421                 break;
3422         case BTTV_BOARD_HAUPPAUGE:
3423         case BTTV_BOARD_HAUPPAUGE878:
3424         case BTTV_BOARD_HAUPPAUGEPVR:
3425                 /* pick up some config infos from the eeprom */
3426                 bttv_readee(btv,eeprom_data,0xa0);
3427                 hauppauge_eeprom(btv);
3428                 break;
3429         case BTTV_BOARD_AVERMEDIA98:
3430         case BTTV_BOARD_AVPHONE98:
3431                 bttv_readee(btv,eeprom_data,0xa0);
3432                 avermedia_eeprom(btv);
3433                 break;
3434         case BTTV_BOARD_PXC200:
3435                 init_PXC200(btv);
3436                 break;
3437         case BTTV_BOARD_PICOLO_TETRA_CHIP:
3438                 picolo_tetra_init(btv);
3439                 break;
3440         case BTTV_BOARD_VHX:
3441                 btv->has_radio    = 1;
3442                 btv->has_matchbox = 1;
3443                 btv->mbox_we      = 0x20;
3444                 btv->mbox_most    = 0;
3445                 btv->mbox_clk     = 0x08;
3446                 btv->mbox_data    = 0x10;
3447                 btv->mbox_mask    = 0x38;
3448                 break;
3449         case BTTV_BOARD_VOBIS_BOOSTAR:
3450         case BTTV_BOARD_TERRATV:
3451                 terratec_active_radio_upgrade(btv);
3452                 break;
3453         case BTTV_BOARD_MAGICTVIEW061:
3454                 if (btv->cardid == 0x3002144f) {
3455                         btv->has_radio=1;
3456                         printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3457                 }
3458                 break;
3459         case BTTV_BOARD_STB2:
3460                 if (btv->cardid == 0x3060121a) {
3461                         /* Fix up entry for 3DFX VoodooTV 100,
3462                            which is an OEM STB card variant. */
3463                         btv->has_radio=0;
3464                         btv->tuner_type=TUNER_TEMIC_NTSC;
3465                 }
3466                 break;
3467         case BTTV_BOARD_OSPREY1x0:
3468         case BTTV_BOARD_OSPREY1x0_848:
3469         case BTTV_BOARD_OSPREY101_848:
3470         case BTTV_BOARD_OSPREY1x1:
3471         case BTTV_BOARD_OSPREY1x1_SVID:
3472         case BTTV_BOARD_OSPREY2xx:
3473         case BTTV_BOARD_OSPREY2x0_SVID:
3474         case BTTV_BOARD_OSPREY2x0:
3475         case BTTV_BOARD_OSPREY440:
3476         case BTTV_BOARD_OSPREY500:
3477         case BTTV_BOARD_OSPREY540:
3478         case BTTV_BOARD_OSPREY2000:
3479                 bttv_readee(btv,eeprom_data,0xa0);
3480                 osprey_eeprom(btv, eeprom_data);
3481                 break;
3482         case BTTV_BOARD_IDS_EAGLE:
3483                 init_ids_eagle(btv);
3484                 break;
3485         case BTTV_BOARD_MODTEC_205:
3486                 bttv_readee(btv,eeprom_data,0xa0);
3487                 modtec_eeprom(btv);
3488                 break;
3489         case BTTV_BOARD_LMLBT4:
3490                 init_lmlbt4x(btv);
3491                 break;
3492         case BTTV_BOARD_TIBET_CS16:
3493                 tibetCS16_init(btv);
3494                 break;
3495         case BTTV_BOARD_KODICOM_4400R:
3496                 kodicom4400r_init(btv);
3497                 break;
3498         }
3499
3500         /* pll configuration */
3501         if (!(btv->id==848 && btv->revision==0x11)) {
3502                 /* defaults from card list */
3503                 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3504                         btv->pll.pll_ifreq=28636363;
3505                         btv->pll.pll_crystal=BT848_IFORM_XT0;
3506                 }
3507                 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3508                         btv->pll.pll_ifreq=35468950;
3509                         btv->pll.pll_crystal=BT848_IFORM_XT1;
3510                 }
3511                 /* insmod options can override */
3512                 switch (pll[btv->c.nr]) {
3513                 case 0: /* none */
3514                         btv->pll.pll_crystal = 0;
3515                         btv->pll.pll_ifreq   = 0;
3516                         btv->pll.pll_ofreq   = 0;
3517                         break;
3518                 case 1: /* 28 MHz */
3519                 case 28:
3520                         btv->pll.pll_ifreq   = 28636363;
3521                         btv->pll.pll_ofreq   = 0;
3522                         btv->pll.pll_crystal = BT848_IFORM_XT0;
3523                         break;
3524                 case 2: /* 35 MHz */
3525                 case 35:
3526                         btv->pll.pll_ifreq   = 35468950;
3527                         btv->pll.pll_ofreq   = 0;
3528                         btv->pll.pll_crystal = BT848_IFORM_XT1;
3529                         break;
3530                 }
3531         }
3532         btv->pll.pll_current = -1;
3533
3534         /* tuner configuration (from card list / autodetect / insmod option) */
3535         if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3536                 addr = bttv_tvcards[btv->c.type].tuner_addr;
3537
3538         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3539                 if(UNSET == btv->tuner_type)
3540                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3541         if (UNSET != tuner[btv->c.nr])
3542                 btv->tuner_type = tuner[btv->c.nr];
3543
3544         if (btv->tuner_type == TUNER_ABSENT ||
3545             bttv_tvcards[btv->c.type].tuner == UNSET)
3546                 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3547         else if(btv->tuner_type == UNSET)
3548                 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3549         else
3550                 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3551                        btv->tuner_type);
3552
3553         if (btv->tuner_type != UNSET) {
3554                 struct tuner_setup tun_setup;
3555
3556                 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3557                 tun_setup.type = btv->tuner_type;
3558                 tun_setup.addr = addr;
3559
3560                 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3561         }
3562
3563         if (btv->tda9887_conf) {
3564                 struct v4l2_priv_tun_config tda9887_cfg;
3565
3566                 tda9887_cfg.tuner = TUNER_TDA9887;
3567                 tda9887_cfg.priv = &btv->tda9887_conf;
3568
3569                 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3570         }
3571
3572         btv->svhs = bttv_tvcards[btv->c.type].svhs;
3573         if (svhs[btv->c.nr] != UNSET)
3574                 btv->svhs = svhs[btv->c.nr];
3575         if (remote[btv->c.nr] != UNSET)
3576                 btv->has_remote = remote[btv->c.nr];
3577
3578         if (bttv_tvcards[btv->c.type].has_radio)
3579                 btv->has_radio=1;
3580         if (bttv_tvcards[btv->c.type].has_remote)
3581                 btv->has_remote=1;
3582         if (!bttv_tvcards[btv->c.type].no_gpioirq)
3583                 btv->gpioirq=1;
3584         if (bttv_tvcards[btv->c.type].volume_gpio)
3585                 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3586         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3587                 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3588
3589         if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) {
3590                 /* detect Bt832 chip for quartzsight digital camera */
3591                 if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) ||
3592                     (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0))
3593                         boot_bt832(btv);
3594         }
3595
3596         if (!autoload)
3597                 return;
3598
3599         if (bttv_tvcards[btv->c.type].tuner == UNSET)
3600                 return;  /* no tuner or related drivers to load */
3601
3602         /* try to detect audio/fader chips */
3603         if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3604             bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3605                 request_module("msp3400");
3606
3607         if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3608             bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3609                 request_module("msp3400");
3610
3611         if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3612             bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3613                 request_module("tda9875");
3614
3615         if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3616             bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3617                 request_module("tda7432");
3618
3619         if (bttv_tvcards[btv->c.type].needs_tvaudio)
3620                 request_module("tvaudio");
3621
3622         if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT)
3623                 request_module("tuner");
3624 }
3625
3626
3627 /* ----------------------------------------------------------------------- */
3628
3629 static void modtec_eeprom(struct bttv *btv)
3630 {
3631         if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3632                 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3633                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3634                        btv->c.nr,&eeprom_data[0x1e]);
3635         } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3636                 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3637                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3638                        btv->c.nr,&eeprom_data[0x1e]);
3639         } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3640                 btv->tuner_type=TUNER_PHILIPS_NTSC;
3641                 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3642                        btv->c.nr,&eeprom_data[0x1e]);
3643         } else {
3644                 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3645                        btv->c.nr,&eeprom_data[0x1e]);
3646         }
3647 }
3648
3649 static void __devinit hauppauge_eeprom(struct bttv *btv)
3650 {
3651         struct tveeprom tv;
3652
3653         tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3654         btv->tuner_type = tv.tuner_type;
3655         btv->has_radio  = tv.has_radio;
3656
3657         printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3658                 btv->c.nr, tv.model);
3659
3660         /*
3661          * Some of the 878 boards have duplicate PCI IDs. Switch the board
3662          * type based on model #.
3663          */
3664         if(tv.model == 64900) {
3665                 printk("bttv%d: Switching board type from %s to %s\n",
3666                         btv->c.nr,
3667                         bttv_tvcards[btv->c.type].name,
3668                         bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3669                 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3670         }
3671 }
3672
3673 static int terratec_active_radio_upgrade(struct bttv *btv)
3674 {
3675         int freq;
3676
3677         btv->has_radio    = 1;
3678         btv->has_matchbox = 1;
3679         btv->mbox_we      = 0x10;
3680         btv->mbox_most    = 0x20;
3681         btv->mbox_clk     = 0x08;
3682         btv->mbox_data    = 0x04;
3683         btv->mbox_mask    = 0x3c;
3684
3685         btv->mbox_iow     = 1 <<  8;
3686         btv->mbox_ior     = 1 <<  9;
3687         btv->mbox_csel    = 1 << 10;
3688
3689         freq=88000/62.5;
3690         tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3691         if (0x1ed8 == tea5757_read(btv)) {
3692                 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3693                        btv->c.nr);
3694                 btv->has_radio    = 1;
3695                 btv->has_matchbox = 1;
3696         } else {
3697                 btv->has_radio    = 0;
3698                 btv->has_matchbox = 0;
3699         }
3700         return 0;
3701 }
3702
3703
3704 /* ----------------------------------------------------------------------- */
3705
3706 /*
3707  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3708  *
3709  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3710  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3711  * unpacked with unzip).
3712  */
3713 #define PVR_GPIO_DELAY          10
3714
3715 #define BTTV_ALT_DATA           0x000001
3716 #define BTTV_ALT_DCLK           0x100000
3717 #define BTTV_ALT_NCONFIG        0x800000
3718
3719 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen)
3720 {
3721         u32 n;
3722         u8 bits;
3723         int i;
3724
3725         gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3726         gpio_write(0);
3727         udelay(PVR_GPIO_DELAY);
3728
3729         gpio_write(BTTV_ALT_NCONFIG);
3730         udelay(PVR_GPIO_DELAY);
3731
3732         for (n = 0; n < microlen; n++) {
3733                 bits = micro[n];
3734                 for (i = 0 ; i < 8 ; i++) {
3735                         gpio_bits(BTTV_ALT_DCLK,0);
3736                         if (bits & 0x01)
3737                                 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3738                         else
3739                                 gpio_bits(BTTV_ALT_DATA,0);
3740                         gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3741                         bits >>= 1;
3742                 }
3743         }
3744         gpio_bits(BTTV_ALT_DCLK,0);
3745         udelay(PVR_GPIO_DELAY);
3746
3747         /* begin Altera init loop (Not necessary,but doesn't hurt) */
3748         for (i = 0 ; i < 30 ; i++) {
3749                 gpio_bits(BTTV_ALT_DCLK,0);
3750                 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3751         }
3752         gpio_bits(BTTV_ALT_DCLK,0);
3753         return 0;
3754 }
3755
3756 static int __devinit pvr_boot(struct bttv *btv)
3757 {
3758         const struct firmware *fw_entry;
3759         int rc;
3760
3761         rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3762         if (rc != 0) {
3763                 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3764                        btv->c.nr);
3765                 return rc;
3766         }
3767         rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3768         printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3769                btv->c.nr, (rc < 0) ? "failed" : "ok");
3770         release_firmware(fw_entry);
3771         return rc;
3772 }
3773
3774 /* ----------------------------------------------------------------------- */
3775 /* some osprey specific stuff                                              */
3776
3777 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3778 {
3779         int i;
3780         u32 serial = 0;
3781         int cardid = -1;
3782
3783         /* This code will nevery actually get called in this case.... */
3784         if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3785                 /* this might be an antique... check for MMAC label in eeprom */
3786                 if (!strncmp(ee, "MMAC", 4)) {
3787                         u8 checksum = 0;
3788                         for (i = 0; i < 21; i++)
3789                                 checksum += ee[i];
3790                         if (checksum != ee[21])
3791                                 return;
3792                         cardid = BTTV_BOARD_OSPREY1x0_848;
3793                         for (i = 12; i < 21; i++)
3794                                 serial *= 10, serial += ee[i] - '0';
3795                 }
3796         } else {
3797                 unsigned short type;
3798
3799                 for (i = 4*16; i < 8*16; i += 16) {
3800                         u16 checksum = ip_compute_csum(ee + i, 16);
3801
3802                         if ((checksum&0xff) + (checksum>>8) == 0xff)
3803                                 break;
3804                 }
3805                 if (i >= 8*16)
3806                         return;
3807                 ee += i;
3808
3809                 /* found a valid descriptor */
3810                 type = be16_to_cpup((u16*)(ee+4));
3811
3812                 switch(type) {
3813                 /* 848 based */
3814                 case 0x0004:
3815                         cardid = BTTV_BOARD_OSPREY1x0_848;
3816                         break;
3817                 case 0x0005:
3818                         cardid = BTTV_BOARD_OSPREY101_848;
3819                         break;
3820
3821                 /* 878 based */
3822                 case 0x0012:
3823                 case 0x0013:
3824                         cardid = BTTV_BOARD_OSPREY1x0;
3825                         break;
3826                 case 0x0014:
3827                 case 0x0015:
3828                         cardid = BTTV_BOARD_OSPREY1x1;
3829                         break;
3830                 case 0x0016:
3831                 case 0x0017:
3832                 case 0x0020:
3833                         cardid = BTTV_BOARD_OSPREY1x1_SVID;
3834                         break;
3835                 case 0x0018:
3836                 case 0x0019:
3837                 case 0x001E:
3838                 case 0x001F:
3839                         cardid = BTTV_BOARD_OSPREY2xx;
3840                         break;
3841                 case 0x001A:
3842                 case 0x001B:
3843                         cardid = BTTV_BOARD_OSPREY2x0_SVID;
3844                         break;
3845                 case 0x0040:
3846                         cardid = BTTV_BOARD_OSPREY500;
3847                         break;
3848                 case 0x0050:
3849                 case 0x0056:
3850                         cardid = BTTV_BOARD_OSPREY540;
3851                         /* bttv_osprey_540_init(btv); */
3852                         break;
3853                 case 0x0060:
3854                 case 0x0070:
3855                 case 0x00A0:
3856                         cardid = BTTV_BOARD_OSPREY2x0;
3857                         /* enable output on select control lines */
3858                         gpio_inout(0xffffff,0x000303);
3859                         break;
3860                 case 0x00D8:
3861                         cardid = BTTV_BOARD_OSPREY440;
3862                         break;
3863                 default:
3864                         /* unknown...leave generic, but get serial # */
3865                         printk(KERN_INFO "bttv%d: "
3866                                "osprey eeprom: unknown card type 0x%04x\n",
3867                                btv->c.nr, type);
3868                         break;
3869                 }
3870                 serial = be32_to_cpup((u32*)(ee+6));
3871         }
3872
3873         printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3874                btv->c.nr, cardid,
3875                cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3876
3877         if (cardid<0 || btv->c.type == cardid)
3878                 return;
3879
3880         /* card type isn't set correctly */
3881         if (card[btv->c.nr] < bttv_num_tvcards) {
3882                 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3883                        "Not overriding user specified card type\n", btv->c.nr);
3884         } else {
3885                 printk(KERN_INFO "bttv%d: osprey eeprom: "
3886                        "Changing card type from %d to %d\n", btv->c.nr,
3887                        btv->c.type, cardid);
3888                 btv->c.type = cardid;
3889         }
3890 }
3891
3892 /* ----------------------------------------------------------------------- */
3893 /* AVermedia specific stuff, from  bktr_card.c                             */
3894
3895 static int tuner_0_table[] = {
3896         TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3897         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3898         TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3899         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3900         TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3901         TUNER_PHILIPS_FM1216ME_MK3 };
3902
3903 static int tuner_1_table[] = {
3904         TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3905         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3906         TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3907         TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3908         TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3909
3910 static void __devinit avermedia_eeprom(struct bttv *btv)
3911 {
3912         int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
3913
3914         tuner_make      = (eeprom_data[0x41] & 0x7);
3915         tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3916         tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3917         btv->has_remote = (eeprom_data[0x42] & 0x01);
3918
3919         if (tuner_make == 0 || tuner_make == 2)
3920                 if(tuner_format <=0x0a)
3921                         tuner = tuner_0_table[tuner_format];
3922         if (tuner_make == 1)
3923                 if(tuner_format <=9)
3924                         tuner = tuner_1_table[tuner_format];
3925
3926         if (tuner_make == 4)
3927                 if(tuner_format == 0x09)
3928                         tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3929
3930         printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3931                 btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
3932         if(tuner) {
3933                 btv->tuner_type=tuner;
3934                 printk("%d",tuner);
3935         } else
3936                 printk("Unknown type");
3937         printk(" radio:%s remote control:%s\n",
3938                tuner_tv_fm     ? "yes" : "no",
3939                btv->has_remote ? "yes" : "no");
3940 }
3941
3942 /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
3943 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
3944 {
3945         /* fix up our card entry */
3946         if(norm==V4L2_STD_NTSC) {
3947                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3948                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
3949                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
3950                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff;
3951                 dprintk("bttv_tda9880_setnorm to NTSC\n");
3952         }
3953         else {
3954                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3955                 bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff;
3956                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff;
3957                 bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff;
3958                 dprintk("bttv_tda9880_setnorm to PAL\n");
3959         }
3960         /* set GPIO according */
3961         gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
3962                   bttv_tvcards[btv->c.type].gpiomux[btv->audio]);
3963 }
3964
3965
3966 /*
3967  * reset/enable the MSP on some Hauppauge cards
3968  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3969  *
3970  * Hauppauge:  pin  5
3971  * Voodoo:     pin 20
3972  */
3973 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3974 {
3975         int mask = (1 << pin);
3976
3977         gpio_inout(mask,mask);
3978         gpio_bits(mask,0);
3979         udelay(2500);
3980         gpio_bits(mask,mask);
3981
3982         if (bttv_gpio)
3983                 bttv_gpio_tracking(btv,"msp34xx");
3984         if (bttv_verbose)
3985                 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3986                        "init [%d]\n", btv->c.nr, pin);
3987 }
3988
3989 static void __devinit boot_bt832(struct bttv *btv)
3990 {
3991 }
3992
3993 /* ----------------------------------------------------------------------- */
3994 /*  Imagenation L-Model PXC200 Framegrabber */
3995 /*  This is basically the same procedure as
3996  *  used by Alessandro Rubini in his pxc200
3997  *  driver, but using BTTV functions */
3998
3999 static void __devinit init_PXC200(struct bttv *btv)
4000 {
4001         static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4002                                             0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4003                                             0x00 };
4004         unsigned int i;
4005         int tmp;
4006         u32 val;
4007
4008         /* Initialise GPIO-connevted stuff */
4009         gpio_inout(0xffffff, (1<<13));
4010         gpio_write(0);
4011         udelay(3);
4012         gpio_write(1<<13);
4013         /* GPIO inputs are pulled up, so no need to drive
4014          * reset pin any longer */
4015         gpio_bits(0xffffff, 0);
4016         if (bttv_gpio)
4017                 bttv_gpio_tracking(btv,"pxc200");
4018
4019         /*  we could/should try and reset/control the AD pots? but
4020             right now  we simply  turned off the crushing.  Without
4021             this the AGC drifts drifts
4022             remember the EN is reverse logic -->
4023             setting BT848_ADC_AGC_EN disable the AGC
4024             tboult@eecs.lehigh.edu
4025         */
4026
4027         btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4028
4029         /*      Initialise MAX517 DAC */
4030         printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4031         bttv_I2CWrite(btv,0x5E,0,0x80,1);
4032
4033         /*      Initialise 12C508 PIC */
4034         /*      The I2CWrite and I2CRead commmands are actually to the
4035          *      same chips - but the R/W bit is included in the address
4036          *      argument so the numbers are different */
4037
4038
4039         printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4040
4041         /* First of all, enable the clock line. This is used in the PXC200-F */
4042         val = btread(BT848_GPIO_DMA_CTL);
4043         val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4044         btwrite(val, BT848_GPIO_DMA_CTL);
4045
4046         /* Then, push to 0 the reset pin long enough to reset the *
4047          * device same as above for the reset line, but not the same
4048          * value sent to the GPIO-connected stuff
4049          * which one is the good one? */
4050         gpio_inout(0xffffff,(1<<2));
4051         gpio_write(0);
4052         udelay(10);
4053         gpio_write(1<<2);
4054
4055         for (i = 0; i < ARRAY_SIZE(vals); i++) {
4056                 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4057                 if (tmp != -1) {
4058                         printk(KERN_INFO
4059                                "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4060                                vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4061                 }
4062         }
4063
4064         printk(KERN_INFO "PXC200 Initialised.\n");
4065 }
4066
4067
4068
4069 /* ----------------------------------------------------------------------- */
4070 /*
4071  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4072  *  it. This apparently involves the following procedure for each 878 chip:
4073  *
4074  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4075  *
4076  *  2)  write to GPIO_DATA
4077  *      - 0x0E
4078  *      - sleep 1ms
4079  *      - 0x10 + 0x0E
4080  *      - sleep 10ms
4081  *      - 0x0E
4082  *     read from GPIO_DATA into buf (uint_32)
4083  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4084  *                 error. ERROR_CPLD_Check_Failed stop.
4085  *
4086  *  3) write to GPIO_DATA
4087  *      - write 0x4400 + 0x0E
4088  *      - sleep 10ms
4089  *      - write 0x4410 + 0x0E
4090  *      - sleep 1ms
4091  *      - write 0x0E
4092  *     read from GPIO_DATA into buf (uint_32)
4093  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4094  *                error. ERROR_CPLD_Check_Failed.
4095  */
4096 /* ----------------------------------------------------------------------- */
4097 static void
4098 init_RTV24 (struct bttv *btv)
4099 {
4100         uint32_t dataRead = 0;
4101         long watchdog_value = 0x0E;
4102
4103         printk (KERN_INFO
4104                 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4105                 btv->c.nr);
4106
4107         btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4108
4109         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4110         msleep (1);
4111         btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4112         msleep (10);
4113         btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4114
4115         dataRead = btread (BT848_GPIO_DATA);
4116
4117         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4118                 printk (KERN_INFO
4119                         "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4120                         btv->c.nr, dataRead);
4121         }
4122
4123         btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4124         msleep (10);
4125         btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4126         msleep (1);
4127         btwrite (watchdog_value, BT848_GPIO_DATA);
4128         msleep (1);
4129         dataRead = btread (BT848_GPIO_DATA);
4130
4131         if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4132                 printk (KERN_INFO
4133                         "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4134                         btv->c.nr, dataRead);
4135
4136                 return;
4137         }
4138
4139         printk (KERN_INFO
4140                 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4141 }
4142
4143
4144
4145 /* ----------------------------------------------------------------------- */
4146 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4147 /*
4148  * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4149  * This code is placed under the terms of the GNU General Public License
4150  *
4151  * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4152  */
4153
4154 static void bus_low(struct bttv *btv, int bit)
4155 {
4156         if (btv->mbox_ior) {
4157                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4158                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4159                 udelay(5);
4160         }
4161
4162         gpio_bits(bit,0);
4163         udelay(5);
4164
4165         if (btv->mbox_ior) {
4166                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4167                 udelay(5);
4168         }
4169 }
4170
4171 static void bus_high(struct bttv *btv, int bit)
4172 {
4173         if (btv->mbox_ior) {
4174                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4175                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4176                 udelay(5);
4177         }
4178
4179         gpio_bits(bit,bit);
4180         udelay(5);
4181
4182         if (btv->mbox_ior) {
4183                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4184                 udelay(5);
4185         }
4186 }
4187
4188 static int bus_in(struct bttv *btv, int bit)
4189 {
4190         if (btv->mbox_ior) {
4191                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4192                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4193                 udelay(5);
4194
4195                 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4196                 udelay(5);
4197         }
4198         return gpio_read() & (bit);
4199 }
4200
4201 /* TEA5757 register bits */
4202 #define TEA_FREQ                0:14
4203 #define TEA_BUFFER              15:15
4204
4205 #define TEA_SIGNAL_STRENGTH     16:17
4206
4207 #define TEA_PORT1               18:18
4208 #define TEA_PORT0               19:19
4209
4210 #define TEA_BAND                20:21
4211 #define TEA_BAND_FM             0
4212 #define TEA_BAND_MW             1
4213 #define TEA_BAND_LW             2
4214 #define TEA_BAND_SW             3
4215
4216 #define TEA_MONO                22:22
4217 #define TEA_ALLOW_STEREO        0
4218 #define TEA_FORCE_MONO          1
4219
4220 #define TEA_SEARCH_DIRECTION    23:23
4221 #define TEA_SEARCH_DOWN         0
4222 #define TEA_SEARCH_UP           1
4223
4224 #define TEA_STATUS              24:24
4225 #define TEA_STATUS_TUNED        0
4226 #define TEA_STATUS_SEARCHING    1
4227
4228 /* Low-level stuff */
4229 static int tea5757_read(struct bttv *btv)
4230 {
4231         unsigned long timeout;
4232         int value = 0;
4233         int i;
4234
4235         /* better safe than sorry */
4236         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4237
4238         if (btv->mbox_ior) {
4239                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4240                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4241                 udelay(5);
4242         }
4243
4244         if (bttv_gpio)
4245                 bttv_gpio_tracking(btv,"tea5757 read");
4246
4247         bus_low(btv,btv->mbox_we);
4248         bus_low(btv,btv->mbox_clk);
4249
4250         udelay(10);
4251         timeout= jiffies + msecs_to_jiffies(1000);
4252
4253         /* wait for DATA line to go low; error if it doesn't */
4254         while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4255                 schedule();
4256         if (bus_in(btv,btv->mbox_data)) {
4257                 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4258                 return -1;
4259         }
4260
4261         dprintk("bttv%d: tea5757:",btv->c.nr);
4262         for (i = 0; i < 24; i++) {
4263                 udelay(5);
4264                 bus_high(btv,btv->mbox_clk);
4265                 udelay(5);
4266                 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4267                 bus_low(btv,btv->mbox_clk);
4268                 value <<= 1;
4269                 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4270                 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4271         }
4272         dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4273         return value;
4274 }
4275
4276 static int tea5757_write(struct bttv *btv, int value)
4277 {
4278         int i;
4279         int reg = value;
4280
4281         gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4282
4283         if (btv->mbox_ior) {
4284                 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4285                           btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4286                 udelay(5);
4287         }
4288         if (bttv_gpio)
4289                 bttv_gpio_tracking(btv,"tea5757 write");
4290
4291         dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4292         bus_low(btv,btv->mbox_clk);
4293         bus_high(btv,btv->mbox_we);
4294         for (i = 0; i < 25; i++) {
4295                 if (reg & 0x1000000)
4296                         bus_high(btv,btv->mbox_data);
4297                 else
4298                         bus_low(btv,btv->mbox_data);
4299                 reg <<= 1;
4300                 bus_high(btv,btv->mbox_clk);
4301                 udelay(10);
4302                 bus_low(btv,btv->mbox_clk);
4303                 udelay(10);
4304         }
4305         bus_low(btv,btv->mbox_we);  /* unmute !!! */
4306         return 0;
4307 }
4308
4309 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4310 {
4311         dprintk("tea5757_set_freq %d\n",freq);
4312         tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4313 }
4314
4315 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4316  *
4317  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4318  * switch instead (CD22M3494E). This IC can have multiple active connections
4319  * between Xn (input) and Yn (output) pins. We need to clear any existing
4320  * connection prior to establish a new one, pulsing the STROBE pin.
4321  *
4322  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4323  * GPIO pins are wired as:
4324  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4325  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4326  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4327  *  GPIO[8]   -                  - P3[5] (microcontroller)
4328  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4329  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4330  *  GPINTR    -                  - P3[4] (microcontroller)
4331  *
4332  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4333  * configuration either directly (as we are doing) or using the microcontroller
4334  * which is also wired to I2C interface. I have no further info on the
4335  * microcontroller features, one would need to disassembly the firmware.
4336  * note: the vendor refused to give any information on this product, all
4337  *       that stuff was found using a multimeter! :)
4338  */
4339 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4340 {
4341         /* reset all conections */
4342         gpio_bits(0x200,0x200);
4343         mdelay(1);
4344         gpio_bits(0x200,0x000);
4345         mdelay(1);
4346
4347         /* create a new connection */
4348         gpio_bits(0x480,0x080);
4349         gpio_bits(0x480,0x480);
4350         mdelay(1);
4351         gpio_bits(0x480,0x080);
4352         mdelay(1);
4353 }
4354
4355 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4356  *
4357  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4358  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4359  * chips, ten eight input analog multiplexors, a not chip and a few
4360  * other components.
4361  *
4362  * 16 inputs on a secondary bracket are provided and can be selected
4363  * from each of the four capture chips.  Two of the eight input
4364  * multiplexors are used to select from any of the 16 input signals.
4365  *
4366  * Unsupported hardware capabilities:
4367  *  . A video output monitor on the secondary bracket can be selected from
4368  *    one of the 878A chips.
4369  *  . Another passthrough but I haven't spent any time investigating it.
4370  *  . Digital I/O (logic level connected to GPIO) is available from an
4371  *    onboard header.
4372  *
4373  * The on chip input mux should always be set to 2.
4374  * GPIO[16:19] - Video input selection
4375  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4376  * GPIO[?:?]   - Digital I/O.
4377  *
4378  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4379  * determined what function (if any) it provides.  With the microcontroller
4380  * and sync seperator chips a guess is that it might have to do with video
4381  * switching and maybe some digital I/O.
4382  */
4383 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4384 {
4385         /* video mux */
4386         gpio_bits(0x0f0000, input << 16);
4387 }
4388
4389 static void tibetCS16_init(struct bttv *btv)
4390 {
4391         /* enable gpio bits, mask obtained via btSpy */
4392         gpio_inout(0xffffff, 0x0f7fff);
4393         gpio_write(0x0f7fff);
4394 }
4395
4396 /*
4397  * The following routines for the Kodicom-4400r get a little mind-twisting.
4398  * There is a "master" controller and three "slave" controllers, together
4399  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4400  * The analog switch is controlled by the "master", but the detection order
4401  * of the four BT878A chips is in an order which I just don't understand.
4402  * The "master" is actually the second controller to be detected.  The
4403  * logic on the board uses logical numbers for the 4 controllers, but
4404  * those numbers are different from the detection sequence.  When working
4405  * with the analog switch, we need to "map" from the detection sequence
4406  * over to the board's logical controller number.  This mapping sequence
4407  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4408  * unit 3, the second (which is the master) is logical unit 0, etc.
4409  * We need to maintain the status of the analog switch (which of the 16
4410  * cameras is connected to which of the 4 controllers).  Rather than
4411  * add to the bttv structure for this, we use the data reserved for
4412  * the mbox (unused for this card type).
4413  */
4414
4415 /*
4416  * First a routine to set the analog switch, which controls which camera
4417  * is routed to which controller.  The switch comprises an X-address
4418  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4419  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4420  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4421  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4422  * specified address.  The idea is to set the address and data, then bring
4423  * STROBE high, and finally bring STROBE back to low.
4424  */
4425 static void kodicom4400r_write(struct bttv *btv,
4426                                unsigned char xaddr,
4427                                unsigned char yaddr,
4428                                unsigned char data) {
4429         unsigned int udata;
4430
4431         udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4432         gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4433         gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4434         gpio_bits(0x1ff, udata);                /* strobe low */
4435 }
4436
4437 /*
4438  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4439  * use this routine.  The routine finds the "master" for the card, maps
4440  * the controller number from the detected position over to the logical
4441  * number, writes the appropriate data to the analog switch, and housekeeps
4442  * the local copy of the switch information.  The parameter 'input' is the
4443  * requested camera number (0 - 15).
4444  */
4445 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4446 {
4447         char *sw_status;
4448         int xaddr, yaddr;
4449         struct bttv *mctlr;
4450         static unsigned char map[4] = {3, 0, 2, 1};
4451
4452         mctlr = master[btv->c.nr];
4453         if (mctlr == NULL) {    /* ignore if master not yet detected */
4454                 return;
4455         }
4456         yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4457         yaddr = map[yaddr];
4458         sw_status = (char *)(&mctlr->mbox_we);
4459         xaddr = input & 0xf;
4460         /* Check if the controller/camera pair has changed, else ignore */
4461         if (sw_status[yaddr] != xaddr)
4462         {
4463                 /* "open" the old switch, "close" the new one, save the new */
4464                 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4465                 sw_status[yaddr] = xaddr;
4466                 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4467         }
4468 }
4469
4470 /*
4471  * During initialisation, we need to reset the analog switch.  We
4472  * also preset the switch to map the 4 connectors on the card to the
4473  * *user's* (see above description of kodicom4400r_muxsel) channels
4474  * 0 through 3
4475  */
4476 static void kodicom4400r_init(struct bttv *btv)
4477 {
4478         char *sw_status = (char *)(&btv->mbox_we);
4479         int ix;
4480
4481         gpio_inout(0x0003ff, 0x0003ff);
4482         gpio_write(1 << 9);     /* reset MUX */
4483         gpio_write(0);
4484         /* Preset camera 0 to the 4 controllers */
4485         for (ix = 0; ix < 4; ix++) {
4486                 sw_status[ix] = ix;
4487                 kodicom4400r_write(btv, ix, ix, 1);
4488         }
4489         /*
4490          * Since this is the "master", we need to set up the
4491          * other three controller chips' pointers to this structure
4492          * for later use in the muxsel routine.
4493          */
4494         if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4495             return;
4496         master[btv->c.nr-1] = btv;
4497         master[btv->c.nr]   = btv;
4498         master[btv->c.nr+1] = btv;
4499         master[btv->c.nr+2] = btv;
4500 }
4501
4502 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4503  * video multiplexers to provide up to 16 video inputs. These
4504  * multiplexers are controlled by the lower 8 GPIO pins of the
4505  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4506
4507  * xxx0 is pin xxx of multiplexer U5,
4508  * yyy1 is pin yyy of multiplexer U2
4509  */
4510 #define ENA0    0x01
4511 #define ENB0    0x02
4512 #define ENA1    0x04
4513 #define ENB1    0x08
4514
4515 #define IN10    0x10
4516 #define IN00    0x20
4517 #define IN11    0x40
4518 #define IN01    0x80
4519
4520 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4521 {
4522         static const int masks[] = {
4523                 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4524                 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4525                 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4526                 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4527         };
4528         gpio_write(masks[input%16]);
4529 }
4530 static void picolo_tetra_init(struct bttv *btv)
4531 {
4532         /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4533         btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4534         btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4535 }
4536 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4537 {
4538
4539         dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel =>  input = %d\n",btv->c.nr,input);
4540         /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4541         /*GPIO[20]&GPIO[21] used to choose the right input*/
4542         btwrite (input<<20,BT848_GPIO_DATA);
4543
4544 }
4545
4546 /*
4547  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4548  *
4549  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4550  * swichers to provide 16 channels to MUX0. The TDA8540's have
4551  * 4 independent outputs and as such the IVC120G also has the
4552  * optional "Monitor Out" bus. This allows the card to be looking
4553  * at one input while the monitor is looking at another.
4554  *
4555  * Since I've couldn't be bothered figuring out how to add an
4556  * independant muxsel for the monitor bus, I've just set it to
4557  * whatever the card is looking at.
4558  *
4559  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4560  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4561  *
4562  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4563  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4564  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4565  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4566  *
4567  */
4568
4569 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4570 #define I2C_TDA8540        0x90
4571 #define I2C_TDA8540_ALT1   0x92
4572 #define I2C_TDA8540_ALT2   0x94
4573 #define I2C_TDA8540_ALT3   0x96
4574 #define I2C_TDA8540_ALT4   0x98
4575 #define I2C_TDA8540_ALT5   0x9a
4576 #define I2C_TDA8540_ALT6   0x9c
4577
4578 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4579 {
4580         /* Simple maths */
4581         int key = input % 4;
4582         int matrix = input / 4;
4583
4584         dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4585                 btv->c.nr, input, matrix, key);
4586
4587         /* Handles the input selection on the TDA8540's */
4588         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4589                       ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4590         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4591                       ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4592         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4593                       ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4594         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4595                       ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4596
4597         /* Handles the output enables on the TDA8540's */
4598         bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4599                       ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4600         bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4601                       ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4602         bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4603                       ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4604         bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4605                       ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4606
4607         /* Selects MUX0 for input on the 878 */
4608         btaor((0)<<5, ~(3<<5), BT848_IFORM);
4609 }
4610
4611
4612 /* PXC200 muxsel helper
4613  * luke@syseng.anu.edu.au
4614  * another transplant
4615  * from Alessandro Rubini (rubini@linux.it)
4616  *
4617  * There are 4 kinds of cards:
4618  * PXC200L which is bt848
4619  * PXC200F which is bt848 with PIC controlling mux
4620  * PXC200AL which is bt878
4621  * PXC200AF which is bt878 with PIC controlling mux
4622  */
4623 #define PX_CFG_PXC200F 0x01
4624 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4625 #define PX_I2C_PIC       0x0f
4626 #define PX_PXC200A_CARDID 0x200a1295
4627 #define PX_I2C_CMD_CFG   0x00
4628
4629 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4630 {
4631         int rc;
4632         long mux;
4633         int bitmask;
4634         unsigned char buf[2];
4635
4636         /* Read PIC config to determine if this is a PXC200F */
4637         /* PX_I2C_CMD_CFG*/
4638         buf[0]=0;
4639         buf[1]=0;
4640         rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4641         if (rc) {
4642           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4643           /* not PXC ? do nothing */
4644           return;
4645         }
4646
4647         rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4648         if (!(rc & PX_CFG_PXC200F)) {
4649           printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4650           return;
4651         }
4652
4653
4654         /* The multiplexer in the 200F is handled by the GPIO port */
4655         /* get correct mapping between inputs  */
4656         /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4657         /* ** not needed!?   */
4658         mux = input;
4659
4660         /* make sure output pins are enabled */
4661         /* bitmask=0x30f; */
4662         bitmask=0x302;
4663         /* check whether we have a PXC200A */
4664         if (btv->cardid == PX_PXC200A_CARDID)  {
4665            bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4666            bitmask |= 7<<4; /* the DAC */
4667         }
4668         btwrite(bitmask, BT848_GPIO_OUT_EN);
4669
4670         bitmask = btread(BT848_GPIO_DATA);
4671         if (btv->cardid == PX_PXC200A_CARDID)
4672           bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4673         else /* older device */
4674           bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4675         btwrite(bitmask,BT848_GPIO_DATA);
4676
4677         /*
4678          * Was "to be safe, set the bt848 to input 0"
4679          * Actually, since it's ok at load time, better not messing
4680          * with these bits (on PXC200AF you need to set mux 2 here)
4681          *
4682          * needed because bttv-driver sets mux before calling this function
4683          */
4684         if (btv->cardid == PX_PXC200A_CARDID)
4685           btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4686         else /* older device */
4687           btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4688
4689         printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4690 }
4691
4692 /* ----------------------------------------------------------------------- */
4693 /* motherboard chipset specific stuff                                      */
4694
4695 void __init bttv_check_chipset(void)
4696 {
4697         int pcipci_fail = 0;
4698         struct pci_dev *dev = NULL;
4699
4700         if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4701                 pcipci_fail = 1;
4702         if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4703                 triton1 = 1;
4704         if (pci_pci_problems & PCIPCI_VSFX)
4705                 vsfx = 1;
4706 #ifdef PCIPCI_ALIMAGIK
4707         if (pci_pci_problems & PCIPCI_ALIMAGIK)
4708                 latency = 0x0A;
4709 #endif
4710
4711
4712         /* print warnings about any quirks found */
4713         if (triton1)
4714                 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4715         if (vsfx)
4716                 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4717         if (pcipci_fail) {
4718                 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4719                                                         "together.\n");
4720                 if (!no_overlay) {
4721                         printk(KERN_INFO "bttv: overlay will be disabled.\n");
4722                         no_overlay = 1;
4723                 } else {
4724                         printk(KERN_INFO "bttv: overlay forced. Use this "
4725                                                 "option at your own risk.\n");
4726                 }
4727         }
4728         if (UNSET != latency)
4729                 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4730         while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4731                                       PCI_DEVICE_ID_INTEL_82441, dev))) {
4732                 unsigned char b;
4733                 pci_read_config_byte(dev, 0x53, &b);
4734                 if (bttv_debug)
4735                         printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4736                                "bufcon=0x%02x\n",b);
4737         }
4738 }
4739
4740 int __devinit bttv_handle_chipset(struct bttv *btv)
4741 {
4742         unsigned char command;
4743
4744         if (!triton1 && !vsfx && UNSET == latency)
4745                 return 0;
4746
4747         if (bttv_verbose) {
4748                 if (triton1)
4749                         printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4750                 if (vsfx && btv->id >= 878)
4751                         printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4752                 if (UNSET != latency)
4753                         printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4754                                btv->c.nr,latency);
4755         }
4756
4757         if (btv->id < 878) {
4758                 /* bt848 (mis)uses a bit in the irq mask for etbf */
4759                 if (triton1)
4760                         btv->triton1 = BT848_INT_ETBF;
4761         } else {
4762                 /* bt878 has a bit in the pci config space for it */
4763                 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4764                 if (triton1)
4765                         command |= BT878_EN_TBFX;
4766                 if (vsfx)
4767                         command |= BT878_EN_VSFX;
4768                 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4769         }
4770         if (UNSET != latency)
4771                 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4772         return 0;
4773 }
4774
4775
4776 /*
4777  * Local variables:
4778  * c-basic-offset: 8
4779  * End:
4780  */