5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
37 #include <asm/unaligned.h>
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
94 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
101 static unsigned int autoload = 1;
103 static unsigned int autoload;
105 static unsigned int gpiomask = UNSET;
106 static unsigned int audioall = UNSET;
107 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
110 module_param(triton1, int, 0444);
111 module_param(vsfx, int, 0444);
112 module_param(no_overlay, int, 0444);
113 module_param(latency, int, 0444);
114 module_param(gpiomask, int, 0444);
115 module_param(audioall, int, 0444);
116 module_param(autoload, int, 0444);
118 module_param_array(card, int, NULL, 0444);
119 module_param_array(pll, int, NULL, 0444);
120 module_param_array(tuner, int, NULL, 0444);
121 module_param_array(svhs, int, NULL, 0444);
122 module_param_array(remote, int, NULL, 0444);
123 module_param_array(audiomux, int, NULL, 0444);
125 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
126 "[enable bug compatibility for triton1 + others]");
127 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
128 "[yet another chipset flaw workaround]");
129 MODULE_PARM_DESC(latency,"pci latency timer");
130 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
131 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
132 MODULE_PARM_DESC(tuner,"specify installed tuner type");
133 MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
134 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
135 " [some VIA/SIS chipsets are known to have problem with overlay]");
137 /* ----------------------------------------------------------------------- */
138 /* list of card IDs for bt878+ cards */
144 } cards[] __devinitdata = {
145 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
146 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
147 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
148 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
149 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
150 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
151 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
152 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
153 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
155 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
156 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
158 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
159 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
160 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
161 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
162 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
163 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
164 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
165 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
166 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
168 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
169 /* some cards ship with byteswapped IDs ... */
170 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
171 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
172 /* this seems to happen as well ... */
173 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
176 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
177 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
179 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
180 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
181 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
182 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
183 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
184 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
185 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
187 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
188 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
189 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
190 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
191 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
193 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
194 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
195 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
196 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
198 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
199 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
200 /* clashes with FlyVideo
201 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
202 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
203 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
204 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
205 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
207 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
208 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
209 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
210 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
211 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
213 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
214 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
215 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
216 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
217 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
219 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
220 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
221 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
222 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
224 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
225 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
226 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
227 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
229 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
230 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
231 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
232 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
233 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
234 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
235 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
236 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
237 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
238 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
239 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
240 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
241 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
242 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
243 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
244 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
255 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
256 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
257 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
259 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
260 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
262 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
263 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
264 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
265 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
266 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
267 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
269 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
270 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
272 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
273 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
274 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
275 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
276 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
277 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
278 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
279 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
280 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
282 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
283 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
285 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
286 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
287 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
288 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
290 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
292 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
293 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
295 /* likely broken, vendor id doesn't match the other magic views ...
296 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
298 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
299 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
301 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
303 /* DVB cards (using pci function .1 for mpeg data xfer) */
304 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
305 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
306 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
307 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
308 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
309 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
310 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
311 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
312 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
313 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
314 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
315 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
316 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
317 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
318 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
319 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
320 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
321 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
322 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
324 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
325 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
326 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
327 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
328 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
329 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
330 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
331 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
336 /* ----------------------------------------------------------------------- */
337 /* array with description for bt848 / bt878 tv/grabber cards */
339 struct tvcard bttv_tvcards[] = {
340 /* ---- card 0x00 ---------------------------------- */
341 [BTTV_BOARD_UNKNOWN] = {
342 .name = " *** UNKNOWN/GENERIC *** ",
345 .muxsel = MUXSEL(2, 3, 1, 0),
347 .tuner_addr = ADDR_UNSET,
349 [BTTV_BOARD_MIRO] = {
352 /* .audio_inputs= 1, */
355 .muxsel = MUXSEL(2, 3, 1, 1),
356 .gpiomux = { 2, 0, 0, 0 },
360 .tuner_addr = ADDR_UNSET,
362 [BTTV_BOARD_HAUPPAUGE] = {
363 .name = "Hauppauge (bt848)",
365 /* .audio_inputs= 1, */
368 .muxsel = MUXSEL(2, 3, 1, 1),
369 .gpiomux = { 0, 1, 2, 3 },
373 .tuner_addr = ADDR_UNSET,
376 .name = "STB, Gateway P/N 6000699 (bt848)",
378 /* .audio_inputs= 1, */
381 .muxsel = MUXSEL(2, 3, 1, 1),
382 .gpiomux = { 4, 0, 2, 3 },
386 .tuner_type = TUNER_PHILIPS_NTSC,
387 .tuner_addr = ADDR_UNSET,
392 /* ---- card 0x04 ---------------------------------- */
393 [BTTV_BOARD_INTEL] = {
394 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
396 /* .audio_inputs= 0, */
399 .muxsel = MUXSEL(2, 3, 1, 1),
402 .tuner_type = TUNER_ABSENT,
403 .tuner_addr = ADDR_UNSET,
405 [BTTV_BOARD_DIAMOND] = {
406 .name = "Diamond DTV2000",
408 /* .audio_inputs= 1, */
411 .muxsel = MUXSEL(2, 3, 1, 0),
412 .gpiomux = { 0, 1, 0, 1 },
416 .tuner_addr = ADDR_UNSET,
418 [BTTV_BOARD_AVERMEDIA] = {
419 .name = "AVerMedia TVPhone",
421 /* .audio_inputs= 1, */
423 .muxsel = MUXSEL(2, 3, 1, 1),
425 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
426 /* 0x04 for some cards ?? */
429 .tuner_addr = ADDR_UNSET,
430 .audio_mode_gpio= avermedia_tvphone_audio,
433 [BTTV_BOARD_MATRIX_VISION] = {
434 .name = "MATRIX-Vision MV-Delta",
436 /* .audio_inputs= 1, */
439 .muxsel = MUXSEL(2, 3, 1, 0, 0),
442 .tuner_type = TUNER_ABSENT,
443 .tuner_addr = ADDR_UNSET,
446 /* ---- card 0x08 ---------------------------------- */
447 [BTTV_BOARD_FLYVIDEO] = {
448 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
450 /* .audio_inputs= 1, */
453 .muxsel = MUXSEL(2, 3, 1, 1),
454 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
459 .tuner_addr = ADDR_UNSET,
461 [BTTV_BOARD_TURBOTV] = {
462 .name = "IMS/IXmicro TurboTV",
464 /* .audio_inputs= 1, */
467 .muxsel = MUXSEL(2, 3, 1, 1),
468 .gpiomux = { 1, 1, 2, 3 },
471 .tuner_type = TUNER_TEMIC_PAL,
472 .tuner_addr = ADDR_UNSET,
474 [BTTV_BOARD_HAUPPAUGE878] = {
475 .name = "Hauppauge (bt878)",
477 /* .audio_inputs= 1, */
479 .gpiomask = 0x0f, /* old: 7 */
480 .muxsel = MUXSEL(2, 0, 1, 1),
481 .gpiomux = { 0, 1, 2, 3 },
486 .tuner_addr = ADDR_UNSET,
488 [BTTV_BOARD_MIROPRO] = {
489 .name = "MIRO PCTV pro",
491 /* .audio_inputs= 1, */
494 .muxsel = MUXSEL(2, 3, 1, 1),
495 .gpiomux = { 0x20001,0x10001, 0, 0 },
499 .tuner_addr = ADDR_UNSET,
502 /* ---- card 0x0c ---------------------------------- */
503 [BTTV_BOARD_ADSTECH_TV] = {
504 .name = "ADS Technologies Channel Surfer TV (bt848)",
506 /* .audio_inputs= 1, */
509 .muxsel = MUXSEL(2, 3, 1, 1),
510 .gpiomux = { 13, 14, 11, 7 },
513 .tuner_addr = ADDR_UNSET,
515 [BTTV_BOARD_AVERMEDIA98] = {
516 .name = "AVerMedia TVCapture 98",
518 /* .audio_inputs= 4, */
521 .muxsel = MUXSEL(2, 3, 1, 1),
522 .gpiomux = { 13, 14, 11, 7 },
526 .tuner_type = TUNER_PHILIPS_PAL,
527 .tuner_addr = ADDR_UNSET,
528 .audio_mode_gpio= avermedia_tv_stereo_audio,
532 .name = "Aimslab Video Highway Xtreme (VHX)",
534 /* .audio_inputs= 1, */
537 .muxsel = MUXSEL(2, 3, 1, 1),
538 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
543 .tuner_addr = ADDR_UNSET,
545 [BTTV_BOARD_ZOLTRIX] = {
546 .name = "Zoltrix TV-Max",
548 /* .audio_inputs= 1, */
551 .muxsel = MUXSEL(2, 3, 1, 1),
552 .gpiomux = { 0, 0, 1, 0 },
556 .tuner_addr = ADDR_UNSET,
559 /* ---- card 0x10 ---------------------------------- */
560 [BTTV_BOARD_PIXVIEWPLAYTV] = {
561 .name = "Prolink Pixelview PlayTV (bt878)",
563 /* .audio_inputs= 1, */
565 .gpiomask = 0x01fe00,
566 .muxsel = MUXSEL(2, 3, 1, 1),
567 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
568 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
569 .gpiomute = 0x002000,
573 .tuner_addr = ADDR_UNSET,
575 [BTTV_BOARD_WINVIEW_601] = {
576 .name = "Leadtek WinView 601",
578 /* .audio_inputs= 1, */
580 .gpiomask = 0x8300f8,
581 .muxsel = MUXSEL(2, 3, 1, 1, 0),
582 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
583 .gpiomute = 0xcfa007,
586 .tuner_addr = ADDR_UNSET,
587 .volume_gpio = winview_volume,
590 [BTTV_BOARD_AVEC_INTERCAP] = {
591 .name = "AVEC Intercapture",
593 /* .audio_inputs= 2, */
596 .muxsel = MUXSEL(2, 3, 1, 1),
597 .gpiomux = { 1, 0, 0, 0 },
600 .tuner_addr = ADDR_UNSET,
602 [BTTV_BOARD_LIFE_FLYKIT] = {
603 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
605 /* .audio_inputs= 1, */
607 .gpiomask = 0x8dff00,
608 .muxsel = MUXSEL(2, 3, 1, 1),
611 .tuner_type = TUNER_ABSENT,
612 .tuner_addr = ADDR_UNSET,
615 /* ---- card 0x14 ---------------------------------- */
616 [BTTV_BOARD_CEI_RAFFLES] = {
617 .name = "CEI Raffles Card",
619 /* .audio_inputs= 3, */
621 .muxsel = MUXSEL(2, 3, 1, 1),
623 .tuner_addr = ADDR_UNSET,
625 [BTTV_BOARD_CONFERENCETV] = {
626 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
628 /* .audio_inputs= 2, tuner, line in */
631 .muxsel = MUXSEL(2, 3, 1, 1),
632 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
635 .tuner_type = TUNER_PHILIPS_PAL_I,
636 .tuner_addr = ADDR_UNSET,
638 [BTTV_BOARD_PHOEBE_TVMAS] = {
639 .name = "Askey CPH050/ Phoebe Tv Master + FM",
641 /* .audio_inputs= 1, */
644 .muxsel = MUXSEL(2, 3, 1, 1),
645 .gpiomux = { 0, 1, 0x800, 0x400 },
650 .tuner_addr = ADDR_UNSET,
652 [BTTV_BOARD_MODTEC_205] = {
653 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
655 /* .audio_inputs= 1, */
659 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
660 /* .digital_mode= DIGITAL_MODE_CAMERA, */
661 .gpiomux = { 0, 0, 0, 0 },
664 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
665 .tuner_addr = ADDR_UNSET,
668 /* ---- card 0x18 ---------------------------------- */
669 [BTTV_BOARD_MAGICTVIEW061] = {
670 .name = "Askey CPH05X/06X (bt878) [many vendors]",
672 /* .audio_inputs= 1, */
675 .muxsel = MUXSEL(2, 3, 1, 1),
676 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
681 .tuner_addr = ADDR_UNSET,
684 [BTTV_BOARD_VOBIS_BOOSTAR] = {
685 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
687 /* .audio_inputs= 1, */
689 .gpiomask = 0x1f0fff,
690 .muxsel = MUXSEL(2, 3, 1, 1),
691 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
694 .tuner_type = TUNER_PHILIPS_PAL,
695 .tuner_addr = ADDR_UNSET,
696 .audio_mode_gpio= terratv_audio,
698 [BTTV_BOARD_HAUPPAUG_WCAM] = {
699 .name = "Hauppauge WinCam newer (bt878)",
701 /* .audio_inputs= 1, */
704 .muxsel = MUXSEL(2, 0, 1, 1),
705 .gpiomux = { 0, 1, 2, 3 },
709 .tuner_addr = ADDR_UNSET,
711 [BTTV_BOARD_MAXI] = {
712 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
714 /* .audio_inputs= 2, */
717 .muxsel = MUXSEL(2, 3, 1, 1),
718 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
721 .tuner_type = TUNER_PHILIPS_SECAM,
722 .tuner_addr = ADDR_UNSET,
725 /* ---- card 0x1c ---------------------------------- */
726 [BTTV_BOARD_TERRATV] = {
727 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
729 /* .audio_inputs= 1, */
731 .gpiomask = 0x1f0fff,
732 .muxsel = MUXSEL(2, 3, 1, 1),
733 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
736 .tuner_type = TUNER_PHILIPS_PAL,
737 .tuner_addr = ADDR_UNSET,
738 .audio_mode_gpio= terratv_audio,
740 External 20 pin connector (for Active Radio Upgrade board)
746 gpio05: om5610-stereo
750 gpio09+10: nIOR, nSEL ?? (bt878)
754 gpio16: u2-A0 (1st 4052bt)
757 gpio19: u4-A0 (2nd 4052)
761 00000 : Cdrom (internal audio input)
762 10000 : ext. Video audio input
771 [BTTV_BOARD_PXC200] = {
772 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
773 .name = "Imagenation PXC200",
775 /* .audio_inputs= 1, */
776 .svhs = 1, /* was: 4 */
778 .muxsel = MUXSEL(2, 3, 1, 0, 0),
781 .tuner_type = TUNER_ABSENT,
782 .tuner_addr = ADDR_UNSET,
783 .muxsel_hook = PXC200_muxsel,
786 [BTTV_BOARD_FLYVIDEO_98] = {
787 .name = "Lifeview FlyVideo 98 LR50",
789 /* .audio_inputs= 1, */
791 .gpiomask = 0x1800, /* 0x8dfe00 */
792 .muxsel = MUXSEL(2, 3, 1, 1),
793 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
797 .tuner_addr = ADDR_UNSET,
799 [BTTV_BOARD_IPROTV] = {
800 .name = "Formac iProTV, Formac ProTV I (bt848)",
802 /* .audio_inputs= 1, */
805 .muxsel = MUXSEL(2, 3, 1, 1),
806 .gpiomux = { 1, 0, 0, 0 },
808 .tuner_type = TUNER_PHILIPS_PAL,
809 .tuner_addr = ADDR_UNSET,
812 /* ---- card 0x20 ---------------------------------- */
813 [BTTV_BOARD_INTEL_C_S_PCI] = {
814 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
816 /* .audio_inputs= 0, */
819 .muxsel = MUXSEL(2, 3, 1, 1),
822 .tuner_type = TUNER_ABSENT,
823 .tuner_addr = ADDR_UNSET,
825 [BTTV_BOARD_TERRATVALUE] = {
826 .name = "Terratec TerraTValue Version Bt878",
828 /* .audio_inputs= 1, */
830 .gpiomask = 0xffff00,
831 .muxsel = MUXSEL(2, 3, 1, 1),
832 .gpiomux = { 0x500, 0, 0x300, 0x900 },
836 .tuner_type = TUNER_PHILIPS_PAL,
837 .tuner_addr = ADDR_UNSET,
839 [BTTV_BOARD_WINFAST2000] = {
840 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
842 /* .audio_inputs= 1, */
844 /* TV, CVid, SVid, CVid over SVid connector */
845 .muxsel = MUXSEL(2, 3, 1, 1, 0),
846 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
847 .gpiomask = 0xb33000,
848 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
849 .gpiomute = 0x800000,
850 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
851 gpio23 -- hef4052:nEnable (0x800000)
854 0x0000: external audio
858 Note: There exists another variant "Winfast 2000" with tv stereo !?
859 Note: eeprom only contains FF and pci subsystem id 107d:6606
864 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
865 .tuner_addr = ADDR_UNSET,
866 .audio_mode_gpio= winfast2000_audio,
869 [BTTV_BOARD_CHRONOS_VS2] = {
870 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
872 /* .audio_inputs= 3, */
875 .muxsel = MUXSEL(2, 3, 1, 1),
876 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
880 .tuner_addr = ADDR_UNSET,
883 /* ---- card 0x24 ---------------------------------- */
884 [BTTV_BOARD_TYPHOON_TVIEW] = {
885 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
887 /* .audio_inputs= 3, */
890 .muxsel = MUXSEL(2, 3, 1, 1),
891 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
895 .tuner_addr = ADDR_UNSET,
898 [BTTV_BOARD_PXELVWPLTVPRO] = {
899 .name = "Prolink PixelView PlayTV pro",
901 /* .audio_inputs= 1, */
904 .muxsel = MUXSEL(2, 3, 1, 1),
905 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
910 .tuner_addr = ADDR_UNSET,
912 [BTTV_BOARD_MAGICTVIEW063] = {
913 .name = "Askey CPH06X TView99",
915 /* .audio_inputs= 1, */
917 .gpiomask = 0x551e00,
918 .muxsel = MUXSEL(2, 3, 1, 0),
919 .gpiomux = { 0x551400, 0x551200, 0, 0 },
920 .gpiomute = 0x551c00,
923 .tuner_type = TUNER_PHILIPS_PAL_I,
924 .tuner_addr = ADDR_UNSET,
927 [BTTV_BOARD_PINNACLE] = {
928 .name = "Pinnacle PCTV Studio/Rave",
930 /* .audio_inputs= 1, */
932 .gpiomask = 0x03000F,
933 .muxsel = MUXSEL(2, 3, 1, 1),
934 .gpiomux = { 2, 0xd0001, 0, 0 },
939 .tuner_addr = ADDR_UNSET,
942 /* ---- card 0x28 ---------------------------------- */
943 [BTTV_BOARD_STB2] = {
944 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
946 /* .audio_inputs= 1, */
949 .muxsel = MUXSEL(2, 3, 1, 1),
950 .gpiomux = { 4, 0, 2, 3 },
954 .tuner_type = TUNER_PHILIPS_NTSC,
955 .tuner_addr = ADDR_UNSET,
959 [BTTV_BOARD_AVPHONE98] = {
960 .name = "AVerMedia TVPhone 98",
962 /* .audio_inputs= 4, */
965 .muxsel = MUXSEL(2, 3, 1, 1),
966 .gpiomux = { 13, 4, 11, 7 },
970 .tuner_addr = ADDR_UNSET,
972 .audio_mode_gpio= avermedia_tvphone_audio,
974 [BTTV_BOARD_PV951] = {
975 .name = "ProVideo PV951", /* pic16c54 */
977 /* .audio_inputs= 1, */
980 .muxsel = MUXSEL(2, 3, 1, 1),
981 .gpiomux = { 0, 0, 0, 0},
985 .tuner_type = TUNER_PHILIPS_PAL_I,
986 .tuner_addr = ADDR_UNSET,
988 [BTTV_BOARD_ONAIR_TV] = {
989 .name = "Little OnAir TV",
991 /* .audio_inputs= 1, */
994 .muxsel = MUXSEL(2, 3, 1, 1),
995 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
996 .gpiomute = 0xff3ffc,
999 .tuner_addr = ADDR_UNSET,
1002 /* ---- card 0x2c ---------------------------------- */
1003 [BTTV_BOARD_SIGMA_TVII_FM] = {
1004 .name = "Sigma TVII-FM",
1006 /* .audio_inputs= 1, */
1009 .muxsel = MUXSEL(2, 3, 1, 1),
1010 .gpiomux = { 1, 1, 0, 2 },
1014 .tuner_type = UNSET,
1015 .tuner_addr = ADDR_UNSET,
1017 [BTTV_BOARD_MATRIX_VISION2] = {
1018 .name = "MATRIX-Vision MV-Delta 2",
1020 /* .audio_inputs= 1, */
1023 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1027 .tuner_type = TUNER_ABSENT,
1028 .tuner_addr = ADDR_UNSET,
1030 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1031 .name = "Zoltrix Genie TV/FM",
1033 /* .audio_inputs= 1, */
1035 .gpiomask = 0xbcf03f,
1036 .muxsel = MUXSEL(2, 3, 1, 1),
1037 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1038 .gpiomute = 0xbcb03f,
1041 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1042 .tuner_addr = ADDR_UNSET,
1044 [BTTV_BOARD_TERRATVRADIO] = {
1045 .name = "Terratec TV/Radio+",
1047 /* .audio_inputs= 1, */
1049 .gpiomask = 0x70000,
1050 .muxsel = MUXSEL(2, 3, 1, 1),
1051 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1052 .gpiomute = 0x40000,
1056 .tuner_type = TUNER_PHILIPS_PAL_I,
1057 .tuner_addr = ADDR_UNSET,
1061 /* ---- card 0x30 ---------------------------------- */
1062 [BTTV_BOARD_DYNALINK] = {
1063 .name = "Askey CPH03x/ Dynalink Magic TView",
1065 /* .audio_inputs= 1, */
1068 .muxsel = MUXSEL(2, 3, 1, 1),
1069 .gpiomux = {2,0,0,0 },
1073 .tuner_type = UNSET,
1074 .tuner_addr = ADDR_UNSET,
1076 [BTTV_BOARD_GVBCTV3PCI] = {
1077 .name = "IODATA GV-BCTV3/PCI",
1079 /* .audio_inputs= 1, */
1081 .gpiomask = 0x010f00,
1082 .muxsel = MUXSEL(2, 3, 0, 0),
1083 .gpiomux = {0x10000, 0, 0x10000, 0 },
1086 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1087 .tuner_addr = ADDR_UNSET,
1088 .audio_mode_gpio= gvbctv3pci_audio,
1090 [BTTV_BOARD_PXELVWPLTVPAK] = {
1091 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1093 /* .audio_inputs= 1, */
1096 .gpiomask = 0xAA0000,
1097 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1098 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1099 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1100 .gpiomute = 0xa8000,
1103 .tuner_type = TUNER_PHILIPS_PAL_I,
1104 .tuner_addr = ADDR_UNSET,
1106 /* GPIO wiring: (different from Rev.4C !)
1107 GPIO17: U4.A0 (first hef4052bt)
1109 GPIO20: U5.A1 (second hef4052bt)
1111 GPIO22: BT832 Reset Line
1112 GPIO23: A5,A0, U5,nEN
1113 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1116 [BTTV_BOARD_EAGLE] = {
1117 .name = "Eagle Wireless Capricorn2 (bt878A)",
1119 /* .audio_inputs= 1, */
1122 .muxsel = MUXSEL(2, 0, 1, 1),
1123 .gpiomux = { 0, 1, 2, 3 },
1126 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1127 .tuner_addr = ADDR_UNSET,
1130 /* ---- card 0x34 ---------------------------------- */
1131 [BTTV_BOARD_PINNACLEPRO] = {
1132 /* David Härdeman <david@2gen.com> */
1133 .name = "Pinnacle PCTV Studio Pro",
1135 /* .audio_inputs= 1, */
1137 .gpiomask = 0x03000F,
1138 .muxsel = MUXSEL(2, 3, 1, 1),
1139 .gpiomux = { 1, 0xd0001, 0, 0 },
1141 /* sound path (5 sources):
1142 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1145 2= Mono TV sound from Tuner
1147 MUX2 (mask 0x30000):
1149 1= FM stereo Radio from Tuner */
1152 .tuner_type = UNSET,
1153 .tuner_addr = ADDR_UNSET,
1155 [BTTV_BOARD_TVIEW_RDS_FM] = {
1156 /* Claas Langbehn <claas@bigfoot.com>,
1157 Sven Grothklags <sven@upb.de> */
1158 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1160 /* .audio_inputs= 3, */
1163 .muxsel = MUXSEL(2, 3, 1, 1),
1164 .gpiomux = { 0, 0, 0x10, 8 },
1168 .tuner_type = TUNER_PHILIPS_PAL,
1169 .tuner_addr = ADDR_UNSET,
1172 [BTTV_BOARD_LIFETEC_9415] = {
1173 /* Tim Röstermundt <rosterm@uni-muenster.de>
1174 in de.comp.os.unix.linux.hardware:
1175 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1176 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1177 options tuner type=5 */
1178 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1180 /* .audio_inputs= 1, */
1183 .muxsel = MUXSEL(2, 3, 1, 1),
1184 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1186 /* For cards with tda9820/tda9821:
1187 0x0000: Tuner normal stereo
1188 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1189 0x0880: Tuner A2 stereo */
1191 .tuner_type = UNSET,
1192 .tuner_addr = ADDR_UNSET,
1194 [BTTV_BOARD_BESTBUY_EASYTV] = {
1195 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1196 old Easy TV BT848 version (model CPH031) */
1197 .name = "Askey CPH031/ BESTBUY Easy TV",
1199 /* .audio_inputs= 1, */
1202 .muxsel = MUXSEL(2, 3, 1, 0),
1203 .gpiomux = { 2, 0, 0, 0 },
1207 .tuner_type = TUNER_TEMIC_PAL,
1208 .tuner_addr = ADDR_UNSET,
1211 /* ---- card 0x38 ---------------------------------- */
1212 [BTTV_BOARD_FLYVIDEO_98FM] = {
1213 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1214 .name = "Lifeview FlyVideo 98FM LR50",
1216 /* .audio_inputs= 3, */
1219 .muxsel = MUXSEL(2, 3, 1, 1),
1220 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1223 .tuner_type = TUNER_PHILIPS_PAL,
1224 .tuner_addr = ADDR_UNSET,
1226 /* This is the ultimate cheapo capture card
1227 * just a BT848A on a small PCB!
1228 * Steve Hosgood <steve@equiinet.com> */
1229 [BTTV_BOARD_GRANDTEC] = {
1230 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1232 /* .audio_inputs= 0, */
1235 .muxsel = MUXSEL(3, 1),
1240 .tuner_type = TUNER_ABSENT,
1241 .tuner_addr = ADDR_UNSET,
1243 [BTTV_BOARD_ASKEY_CPH060] = {
1244 /* Daniel Herrington <daniel.herrington@home.com> */
1245 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1247 /* .audio_inputs= 1, */
1250 .muxsel = MUXSEL(2, 3, 1, 1),
1251 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1255 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1256 .tuner_addr = ADDR_UNSET,
1258 [BTTV_BOARD_ASKEY_CPH03X] = {
1259 /* Matti Mottus <mottus@physic.ut.ee> */
1260 .name = "Askey CPH03x TV Capturer",
1262 /* .audio_inputs= 1, */
1264 .gpiomask = 0x03000F,
1265 .muxsel = MUXSEL(2, 3, 1, 0),
1266 .gpiomux = { 2, 0, 0, 0 },
1269 .tuner_type = TUNER_TEMIC_PAL,
1270 .tuner_addr = ADDR_UNSET,
1273 /* ---- card 0x3c ---------------------------------- */
1274 [BTTV_BOARD_MM100PCTV] = {
1275 /* Philip Blundell <philb@gnu.org> */
1276 .name = "Modular Technology MM100PCTV",
1278 /* .audio_inputs= 2, */
1281 .muxsel = MUXSEL(2, 3, 1, 1),
1282 .gpiomux = { 2, 0, 0, 1 },
1285 .tuner_type = TUNER_TEMIC_PAL,
1286 .tuner_addr = ADDR_UNSET,
1288 [BTTV_BOARD_GMV1] = {
1289 /* Adrian Cox <adrian@humboldt.co.uk */
1290 .name = "AG Electronics GMV1",
1292 /* .audio_inputs= 0, */
1295 .muxsel = MUXSEL(2, 2),
1300 .tuner_type = TUNER_ABSENT,
1301 .tuner_addr = ADDR_UNSET,
1303 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1304 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1305 new Easy TV BT878 version (model CPH061)
1306 special thanks to Informatica Mieres for providing the card */
1307 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1309 /* .audio_inputs= 2, */
1312 .muxsel = MUXSEL(2, 3, 1, 0),
1313 .gpiomux = { 1, 0, 4, 4 },
1317 .tuner_type = TUNER_PHILIPS_PAL,
1318 .tuner_addr = ADDR_UNSET,
1320 [BTTV_BOARD_ATI_TVWONDER] = {
1321 /* Lukas Gebauer <geby@volny.cz> */
1322 .name = "ATI TV-Wonder",
1324 /* .audio_inputs= 1, */
1327 .muxsel = MUXSEL(2, 3, 1, 0),
1328 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1331 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1332 .tuner_addr = ADDR_UNSET,
1335 /* ---- card 0x40 ---------------------------------- */
1336 [BTTV_BOARD_ATI_TVWONDERVE] = {
1337 /* Lukas Gebauer <geby@volny.cz> */
1338 .name = "ATI TV-Wonder VE",
1340 /* .audio_inputs= 1, */
1343 .muxsel = MUXSEL(2, 3, 0, 1),
1344 .gpiomux = { 0, 0, 1, 0 },
1347 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1348 .tuner_addr = ADDR_UNSET,
1350 [BTTV_BOARD_FLYVIDEO2000] = {
1351 /* DeeJay <deejay@westel900.net (2000S) */
1352 .name = "Lifeview FlyVideo 2000S LR90",
1354 /* .audio_inputs= 3, */
1357 .muxsel = MUXSEL(2, 3, 0, 1),
1358 /* Radio changed from 1e80 to 0x800 to make
1359 FlyVideo2000S in .hu happy (gm)*/
1360 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1361 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1363 .audio_mode_gpio= fv2000s_audio,
1368 .tuner_type = TUNER_PHILIPS_PAL,
1369 .tuner_addr = ADDR_UNSET,
1371 [BTTV_BOARD_TERRATVALUER] = {
1372 .name = "Terratec TValueRadio",
1374 /* .audio_inputs= 1, */
1376 .gpiomask = 0xffff00,
1377 .muxsel = MUXSEL(2, 3, 1, 1),
1378 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1382 .tuner_type = TUNER_PHILIPS_PAL,
1383 .tuner_addr = ADDR_UNSET,
1386 [BTTV_BOARD_GVBCTV4PCI] = {
1387 /* TANAKA Kei <peg00625@nifty.com> */
1388 .name = "IODATA GV-BCTV4/PCI",
1390 /* .audio_inputs= 1, */
1392 .gpiomask = 0x010f00,
1393 .muxsel = MUXSEL(2, 3, 0, 0),
1394 .gpiomux = {0x10000, 0, 0x10000, 0 },
1397 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1398 .tuner_addr = ADDR_UNSET,
1399 .audio_mode_gpio= gvbctv3pci_audio,
1402 /* ---- card 0x44 ---------------------------------- */
1403 [BTTV_BOARD_VOODOOTV_FM] = {
1404 .name = "3Dfx VoodooTV FM (Euro)",
1405 /* try "insmod msp3400 simple=0" if you have
1406 * sound problems with this card. */
1408 /* .audio_inputs= 1, */
1410 .gpiomask = 0x4f8a00,
1411 /* 0x100000: 1=MSP enabled (0=disable again)
1412 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1413 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1414 .gpiomute = 0x947fff,
1415 /* tvtuner, radio, external,internal, mute, stereo
1416 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1417 .muxsel = MUXSEL(2, 3, 0, 1),
1418 .tuner_type = TUNER_MT2032,
1419 .tuner_addr = ADDR_UNSET,
1423 [BTTV_BOARD_VOODOOTV_200] = {
1424 .name = "VoodooTV 200 (USA)",
1425 /* try "insmod msp3400 simple=0" if you have
1426 * sound problems with this card. */
1428 /* .audio_inputs= 1, */
1430 .gpiomask = 0x4f8a00,
1431 /* 0x100000: 1=MSP enabled (0=disable again)
1432 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1433 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1434 .gpiomute = 0x947fff,
1435 /* tvtuner, radio, external,internal, mute, stereo
1436 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1437 .muxsel = MUXSEL(2, 3, 0, 1),
1438 .tuner_type = TUNER_MT2032,
1439 .tuner_addr = ADDR_UNSET,
1443 [BTTV_BOARD_AIMMS] = {
1444 /* Philip Blundell <pb@nexus.co.uk> */
1445 .name = "Active Imaging AIMMS",
1447 /* .audio_inputs= 0, */
1448 .tuner_type = TUNER_ABSENT,
1449 .tuner_addr = ADDR_UNSET,
1451 .muxsel = MUXSEL(2),
1454 [BTTV_BOARD_PV_BT878P_PLUS] = {
1455 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1456 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1458 /* .audio_inputs= 4, */
1461 .muxsel = MUXSEL(2, 3, 1, 1),
1462 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1466 .tuner_type = TUNER_LG_PAL_I_FM,
1467 .tuner_addr = ADDR_UNSET,
1470 GPIO0: U4.A0 (hef4052bt)
1472 GPIO2: U4.A1 (second hef4052bt)
1473 GPIO3: U4.nEN, U5.A0, A5.nEN
1477 [BTTV_BOARD_FLYVIDEO98EZ] = {
1478 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1480 /* .audio_inputs= 0, */
1482 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1483 .muxsel = MUXSEL(2, 3, 1, 1),
1486 .tuner_type = TUNER_ABSENT,
1487 .tuner_addr = ADDR_UNSET,
1490 /* ---- card 0x48 ---------------------------------- */
1491 [BTTV_BOARD_PV_BT878P_9B] = {
1492 /* Dariusz Kowalewski <darekk@automex.pl> */
1493 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1495 /* .audio_inputs= 1, */
1498 .muxsel = MUXSEL(2, 3, 1, 1),
1499 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1505 .tuner_type = TUNER_PHILIPS_PAL,
1506 .tuner_addr = ADDR_UNSET,
1507 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1508 .has_radio = 1, /* Note: not all cards have radio */
1515 GPIO20,22,23: R30,R29,R28
1518 [BTTV_BOARD_SENSORAY311] = {
1519 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1520 /* you must jumper JP5 for the card to work */
1521 .name = "Sensoray 311",
1523 /* .audio_inputs= 0, */
1526 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1529 .tuner_type = TUNER_ABSENT,
1530 .tuner_addr = ADDR_UNSET,
1532 [BTTV_BOARD_RV605] = {
1533 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1534 .name = "RemoteVision MX (RV605)",
1536 /* .audio_inputs= 0, */
1539 .gpiomask2 = 0x07ff,
1540 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1543 .tuner_type = TUNER_ABSENT,
1544 .tuner_addr = ADDR_UNSET,
1545 .muxsel_hook = rv605_muxsel,
1547 [BTTV_BOARD_POWERCLR_MTV878] = {
1548 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1550 /* .audio_inputs= 2, */
1552 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1553 .muxsel = MUXSEL(2, 1, 1),
1554 .gpiomux = { 0, 1, 2, 2 },
1557 .tuner_type = TUNER_PHILIPS_PAL,
1558 .tuner_addr = ADDR_UNSET,
1563 /* ---- card 0x4c ---------------------------------- */
1564 [BTTV_BOARD_WINDVR] = {
1565 /* Masaki Suzuki <masaki@btree.org> */
1566 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1568 /* .audio_inputs= 1, */
1570 .gpiomask = 0x140007,
1571 .muxsel = MUXSEL(2, 3, 1, 1),
1572 .gpiomux = { 0, 1, 2, 3 },
1574 .tuner_type = TUNER_PHILIPS_NTSC,
1575 .tuner_addr = ADDR_UNSET,
1576 .audio_mode_gpio= windvr_audio,
1578 [BTTV_BOARD_GRANDTEC_MULTI] = {
1579 .name = "GrandTec Multi Capture Card (Bt878)",
1581 /* .audio_inputs= 0, */
1584 .muxsel = MUXSEL(2, 3, 1, 0),
1589 .tuner_type = TUNER_ABSENT,
1590 .tuner_addr = ADDR_UNSET,
1592 [BTTV_BOARD_KWORLD] = {
1593 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1595 /* .audio_inputs= 3, */
1598 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1599 .muxsel = MUXSEL(2, 3, 1, 1),
1600 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1601 * This card lacks external Audio In, so we mute it on Ext. & Int.
1602 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1603 * This card lacks PCI subsystem ID, sigh.
1604 * gpiomux =1: lower volume, 2+3: mute
1605 * btwincap uses 0x80000/0x80003
1611 .tuner_type = TUNER_PHILIPS_PAL,
1612 .tuner_addr = ADDR_UNSET,
1613 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1614 radio signal strength indicators work fine. */
1617 GPIO0,1: HEF4052 A0,A1
1618 GPIO2: HEF4052 nENABLE
1620 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1624 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1626 [BTTV_BOARD_DSP_TCVIDEO] = {
1627 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1628 .name = "DSP Design TCVIDEO",
1631 .muxsel = MUXSEL(2, 3, 1, 0),
1633 .tuner_type = UNSET,
1634 .tuner_addr = ADDR_UNSET,
1637 /* ---- card 0x50 ---------------------------------- */
1638 [BTTV_BOARD_HAUPPAUGEPVR] = {
1639 .name = "Hauppauge WinTV PVR",
1641 /* .audio_inputs= 1, */
1643 .muxsel = MUXSEL(2, 0, 1, 1),
1646 .tuner_type = UNSET,
1647 .tuner_addr = ADDR_UNSET,
1652 [BTTV_BOARD_GVBCTV5PCI] = {
1653 .name = "IODATA GV-BCTV5/PCI",
1655 /* .audio_inputs= 1, */
1657 .gpiomask = 0x0f0f80,
1658 .muxsel = MUXSEL(2, 3, 1, 0),
1659 .gpiomux = {0x030000, 0x010000, 0, 0 },
1660 .gpiomute = 0x020000,
1663 .tuner_type = TUNER_PHILIPS_NTSC_M,
1664 .tuner_addr = ADDR_UNSET,
1665 .audio_mode_gpio= gvbctv5pci_audio,
1668 [BTTV_BOARD_OSPREY1x0] = {
1669 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1670 .video_inputs = 4, /* id-inputs-clock */
1671 /* .audio_inputs= 0, */
1673 .muxsel = MUXSEL(3, 2, 0, 1),
1675 .tuner_type = TUNER_ABSENT,
1676 .tuner_addr = ADDR_UNSET,
1681 [BTTV_BOARD_OSPREY1x0_848] = {
1682 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1684 /* .audio_inputs= 0, */
1686 .muxsel = MUXSEL(2, 3, 1),
1688 .tuner_type = TUNER_ABSENT,
1689 .tuner_addr = ADDR_UNSET,
1695 /* ---- card 0x54 ---------------------------------- */
1696 [BTTV_BOARD_OSPREY101_848] = {
1697 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1699 /* .audio_inputs= 0, */
1701 .muxsel = MUXSEL(3, 1),
1703 .tuner_type = TUNER_ABSENT,
1704 .tuner_addr = ADDR_UNSET,
1709 [BTTV_BOARD_OSPREY1x1] = {
1710 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1712 /* .audio_inputs= 0, */
1714 .muxsel = MUXSEL(0),
1716 .tuner_type = TUNER_ABSENT,
1717 .tuner_addr = ADDR_UNSET,
1722 [BTTV_BOARD_OSPREY1x1_SVID] = {
1723 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1725 /* .audio_inputs= 0, */
1727 .muxsel = MUXSEL(0, 1),
1729 .tuner_type = TUNER_ABSENT,
1730 .tuner_addr = ADDR_UNSET,
1735 [BTTV_BOARD_OSPREY2xx] = {
1736 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1738 /* .audio_inputs= 1, */
1740 .muxsel = MUXSEL(0),
1742 .tuner_type = TUNER_ABSENT,
1743 .tuner_addr = ADDR_UNSET,
1749 /* ---- card 0x58 ---------------------------------- */
1750 [BTTV_BOARD_OSPREY2x0_SVID] = {
1751 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1753 /* .audio_inputs= 1, */
1755 .muxsel = MUXSEL(0, 1),
1757 .tuner_type = TUNER_ABSENT,
1758 .tuner_addr = ADDR_UNSET,
1763 [BTTV_BOARD_OSPREY2x0] = {
1764 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1766 /* .audio_inputs= 1, */
1768 .muxsel = MUXSEL(2, 3),
1770 .tuner_type = TUNER_ABSENT,
1771 .tuner_addr = ADDR_UNSET,
1776 [BTTV_BOARD_OSPREY500] = {
1777 .name = "Osprey 500", /* 500 */
1779 /* .audio_inputs= 1, */
1781 .muxsel = MUXSEL(2, 3),
1783 .tuner_type = TUNER_ABSENT,
1784 .tuner_addr = ADDR_UNSET,
1789 [BTTV_BOARD_OSPREY540] = {
1790 .name = "Osprey 540", /* 540 */
1792 /* .audio_inputs= 1, */
1794 .tuner_type = TUNER_ABSENT,
1795 .tuner_addr = ADDR_UNSET,
1801 /* ---- card 0x5C ---------------------------------- */
1802 [BTTV_BOARD_OSPREY2000] = {
1803 .name = "Osprey 2000", /* 2000 */
1805 /* .audio_inputs= 1, */
1807 .muxsel = MUXSEL(2, 3),
1809 .tuner_type = TUNER_ABSENT,
1810 .tuner_addr = ADDR_UNSET,
1813 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1815 [BTTV_BOARD_IDS_EAGLE] = {
1816 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1817 .name = "IDS Eagle",
1819 /* .audio_inputs= 0, */
1820 .tuner_type = TUNER_ABSENT,
1821 .tuner_addr = ADDR_UNSET,
1824 .muxsel = MUXSEL(2, 2, 2, 2),
1825 .muxsel_hook = eagle_muxsel,
1830 [BTTV_BOARD_PINNACLESAT] = {
1831 .name = "Pinnacle PCTV Sat",
1833 /* .audio_inputs= 0, */
1835 .tuner_type = TUNER_ABSENT,
1836 .tuner_addr = ADDR_UNSET,
1840 .muxsel = MUXSEL(3, 1),
1845 [BTTV_BOARD_FORMAC_PROTV] = {
1846 .name = "Formac ProTV II (bt878)",
1848 /* .audio_inputs= 1, */
1851 /* TV, Comp1, Composite over SVID con, SVID */
1852 .muxsel = MUXSEL(2, 3, 1, 1),
1853 .gpiomux = { 2, 2, 0, 0 },
1856 .tuner_type = TUNER_PHILIPS_PAL,
1857 .tuner_addr = ADDR_UNSET,
1859 GPIO=0x00,0x01,0x03: mute (?)
1860 0x02: both TV and radio (tuner: FM1216/I)
1861 The card has onboard audio connectors labeled "cdrom" and "board",
1862 not soldered here, though unknown wiring.
1863 Card lacks: external audio in, pci subsystem id.
1867 /* ---- card 0x60 ---------------------------------- */
1868 [BTTV_BOARD_MACHTV] = {
1871 /* .audio_inputs= 1, */
1874 .muxsel = MUXSEL(2, 3, 1, 1),
1875 .gpiomux = { 0, 1, 2, 3},
1878 .tuner_type = TUNER_PHILIPS_PAL,
1879 .tuner_addr = ADDR_UNSET,
1882 [BTTV_BOARD_EURESYS_PICOLO] = {
1883 .name = "Euresys Picolo",
1885 /* .audio_inputs= 0, */
1891 .muxsel = MUXSEL(2, 0, 1),
1893 .tuner_type = TUNER_ABSENT,
1894 .tuner_addr = ADDR_UNSET,
1896 [BTTV_BOARD_PV150] = {
1897 /* Luc Van Hoeylandt <luc@e-magic.be> */
1898 .name = "ProVideo PV150", /* 0x4f */
1900 /* .audio_inputs= 0, */
1903 .muxsel = MUXSEL(2, 3),
1908 .tuner_type = TUNER_ABSENT,
1909 .tuner_addr = ADDR_UNSET,
1911 [BTTV_BOARD_AD_TVK503] = {
1912 /* Hiroshi Takekawa <sian@big.or.jp> */
1913 /* This card lacks subsystem ID */
1914 .name = "AD-TVK503", /* 0x63 */
1916 /* .audio_inputs= 1, */
1918 .gpiomask = 0x001e8007,
1919 .muxsel = MUXSEL(2, 3, 1, 0),
1920 /* Tuner, Radio, external, internal, off, on */
1921 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1926 .tuner_type = TUNER_PHILIPS_NTSC,
1927 .tuner_addr = ADDR_UNSET,
1928 .audio_mode_gpio= adtvk503_audio,
1931 /* ---- card 0x64 ---------------------------------- */
1932 [BTTV_BOARD_HERCULES_SM_TV] = {
1933 .name = "Hercules Smart TV Stereo",
1935 /* .audio_inputs= 1, */
1938 .muxsel = MUXSEL(2, 3, 1, 1),
1942 .tuner_type = TUNER_PHILIPS_PAL,
1943 .tuner_addr = ADDR_UNSET,
1945 - card lacks subsystem ID
1946 - stereo variant w/ daughter board with tda9874a @0xb0
1948 always from tda9874 independent of GPIO (?)
1949 external line in: unknown
1950 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1951 hef4053 (instead 4052) for unknown function
1954 [BTTV_BOARD_PACETV] = {
1955 .name = "Pace TV & Radio Card",
1957 /* .audio_inputs= 1, */
1959 /* Tuner, CVid, SVid, CVid over SVid connector */
1960 .muxsel = MUXSEL(2, 3, 1, 1),
1964 .tuner_type = TUNER_PHILIPS_PAL_I,
1965 .tuner_addr = ADDR_UNSET,
1968 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1969 only internal line out: (4pin header) RGGL
1970 Radio must be decoded by msp3410d (not routed through)*/
1972 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1975 [BTTV_BOARD_IVC200] = {
1976 /* Chris Willing <chris@vislab.usyd.edu.au> */
1979 /* .audio_inputs= 0, */
1980 .tuner_type = TUNER_ABSENT,
1981 .tuner_addr = ADDR_UNSET,
1984 .muxsel = MUXSEL(2),
1987 [BTTV_BOARD_IVCE8784] = {
1988 .name = "IVCE-8784",
1990 /* .audio_inputs= 0, */
1991 .tuner_type = TUNER_ABSENT,
1992 .tuner_addr = ADDR_UNSET,
1995 .muxsel = MUXSEL(2),
1998 [BTTV_BOARD_XGUARD] = {
1999 .name = "Grand X-Guard / Trust 814PCI",
2001 /* .audio_inputs= 0, */
2003 .tuner_type = TUNER_ABSENT,
2004 .tuner_addr = ADDR_UNSET,
2006 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2007 .muxsel_hook = xguard_muxsel,
2014 /* ---- card 0x68 ---------------------------------- */
2015 [BTTV_BOARD_NEBULA_DIGITV] = {
2016 .name = "Nebula Electronics DigiTV",
2019 .muxsel = MUXSEL(2, 3, 1, 0),
2024 .tuner_type = TUNER_ABSENT,
2025 .tuner_addr = ADDR_UNSET,
2031 [BTTV_BOARD_PV143] = {
2032 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2033 .name = "ProVideo PV143",
2035 /* .audio_inputs= 0, */
2038 .muxsel = MUXSEL(2, 3, 1, 0),
2043 .tuner_type = TUNER_ABSENT,
2044 .tuner_addr = ADDR_UNSET,
2046 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2047 /* M.Klahr@phytec.de */
2048 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2050 /* .audio_inputs= 0, */
2053 .muxsel = MUXSEL(2, 3, 1, 0),
2054 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2057 .tuner_type = TUNER_ABSENT,
2058 .tuner_addr = ADDR_UNSET,
2060 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2061 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2063 /* .audio_inputs= 0, */
2066 .muxsel = MUXSEL(2, 3, 1, 1),
2067 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2070 .tuner_type = TUNER_ABSENT,
2071 .tuner_addr = ADDR_UNSET,
2074 /* ---- card 0x6c ---------------------------------- */
2075 [BTTV_BOARD_VD009_MINIDIN] = {
2076 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2078 /* .audio_inputs= 0, */
2081 .gpiomask2 = 0x03, /* used for external vodeo mux */
2082 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2083 .muxsel_hook = phytec_muxsel,
2084 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2087 .tuner_type = TUNER_ABSENT,
2088 .tuner_addr = ADDR_UNSET,
2090 [BTTV_BOARD_VD009_COMBI] = {
2091 .name = "PHYTEC VD-009 Combi (bt878)",
2093 /* .audio_inputs= 0, */
2096 .gpiomask2 = 0x03, /* used for external vodeo mux */
2097 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2098 .muxsel_hook = phytec_muxsel,
2099 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2102 .tuner_type = TUNER_ABSENT,
2103 .tuner_addr = ADDR_UNSET,
2105 [BTTV_BOARD_IVC100] = {
2108 /* .audio_inputs= 0, */
2109 .tuner_type = TUNER_ABSENT,
2110 .tuner_addr = ADDR_UNSET,
2113 .muxsel = MUXSEL(2, 3, 1, 0),
2116 [BTTV_BOARD_IVC120] = {
2117 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2120 /* .audio_inputs= 0, */
2121 .tuner_type = TUNER_ABSENT,
2122 .tuner_addr = ADDR_UNSET,
2123 .svhs = NO_SVHS, /* card has no svhs */
2129 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2130 .muxsel_hook = ivc120_muxsel,
2134 /* ---- card 0x70 ---------------------------------- */
2135 [BTTV_BOARD_PC_HDTV] = {
2136 .name = "pcHDTV HD-2000 TV",
2138 /* .audio_inputs= 1, */
2140 .muxsel = MUXSEL(2, 3, 1, 0),
2141 .tuner_type = TUNER_PHILIPS_FCV1236D,
2142 .tuner_addr = ADDR_UNSET,
2145 [BTTV_BOARD_TWINHAN_DST] = {
2146 .name = "Twinhan DST + clones",
2150 .tuner_type = TUNER_ABSENT,
2151 .tuner_addr = ADDR_UNSET,
2155 [BTTV_BOARD_WINFASTVC100] = {
2156 .name = "Winfast VC100",
2158 /* .audio_inputs= 0, */
2160 /* Vid In, SVid In, Vid over SVid in connector */
2161 .muxsel = MUXSEL(3, 1, 1, 3),
2165 .tuner_type = TUNER_ABSENT,
2166 .tuner_addr = ADDR_UNSET,
2169 [BTTV_BOARD_TEV560] = {
2170 .name = "Teppro TEV-560/InterVision IV-560",
2172 /* .audio_inputs= 1, */
2175 .muxsel = MUXSEL(2, 3, 1, 1),
2176 .gpiomux = { 1, 1, 1, 1 },
2178 .tuner_type = TUNER_PHILIPS_PAL,
2179 .tuner_addr = ADDR_UNSET,
2183 /* ---- card 0x74 ---------------------------------- */
2184 [BTTV_BOARD_SIMUS_GVC1100] = {
2185 .name = "SIMUS GVC1100",
2187 /* .audio_inputs= 0, */
2189 .tuner_type = TUNER_ABSENT,
2190 .tuner_addr = ADDR_UNSET,
2192 .muxsel = MUXSEL(2, 2, 2, 2),
2194 .muxsel_hook = gvc1100_muxsel,
2196 [BTTV_BOARD_NGSTV_PLUS] = {
2197 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2198 .name = "NGS NGSTV+",
2201 .gpiomask = 0x008007,
2202 .muxsel = MUXSEL(2, 3, 0, 0),
2203 .gpiomux = { 0, 0, 0, 0 },
2204 .gpiomute = 0x000003,
2206 .tuner_type = TUNER_PHILIPS_PAL,
2207 .tuner_addr = ADDR_UNSET,
2210 [BTTV_BOARD_LMLBT4] = {
2211 /* http://linuxmedialabs.com */
2213 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2214 /* .audio_inputs= 0, */
2216 .muxsel = MUXSEL(2, 3, 1, 0),
2221 .tuner_type = TUNER_ABSENT,
2222 .tuner_addr = ADDR_UNSET,
2224 [BTTV_BOARD_TEKRAM_M205] = {
2225 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2226 .name = "Tekram M205 PRO",
2228 /* .audio_inputs= 1, */
2229 .tuner_type = TUNER_PHILIPS_PAL,
2230 .tuner_addr = ADDR_UNSET,
2234 .muxsel = MUXSEL(2, 3, 1),
2235 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2239 /* ---- card 0x78 ---------------------------------- */
2240 [BTTV_BOARD_CONTVFMI] = {
2241 /* Javier Cendan Ares <jcendan@lycos.es> */
2242 /* bt878 TV + FM without subsystem ID */
2243 .name = "Conceptronic CONTVFMi",
2245 /* .audio_inputs= 1, */
2247 .gpiomask = 0x008007,
2248 .muxsel = MUXSEL(2, 3, 1, 1),
2249 .gpiomux = { 0, 1, 2, 2 },
2253 .tuner_type = TUNER_PHILIPS_PAL,
2254 .tuner_addr = ADDR_UNSET,
2258 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2259 /*Eric DEBIEF <debief@telemsa.com>*/
2260 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2261 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2263 .name = "Euresys Picolo Tetra",
2265 /* .audio_inputs= 0, */
2268 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2272 /*878A input is always MUX0, see above.*/
2273 .muxsel = MUXSEL(2, 2, 2, 2),
2274 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2277 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2278 .tuner_type = TUNER_ABSENT,
2279 .tuner_addr = ADDR_UNSET,
2281 [BTTV_BOARD_SPIRIT_TV] = {
2282 /* Spirit TV Tuner from http://spiritmodems.com.au */
2283 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2284 .name = "Spirit TV Tuner",
2286 /* .audio_inputs= 1, */
2288 .gpiomask = 0x0000000f,
2289 .muxsel = MUXSEL(2, 1, 1),
2290 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2291 .tuner_type = TUNER_TEMIC_PAL,
2292 .tuner_addr = ADDR_UNSET,
2296 [BTTV_BOARD_AVDVBT_771] = {
2297 /* Wolfram Joost <wojo@frokaschwei.de> */
2298 .name = "AVerMedia AVerTV DVB-T 771",
2301 .tuner_type = TUNER_ABSENT,
2302 .tuner_addr = ADDR_UNSET,
2303 .muxsel = MUXSEL(3, 3),
2312 /* ---- card 0x7c ---------------------------------- */
2313 [BTTV_BOARD_AVDVBT_761] = {
2314 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2315 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2316 .name = "AverMedia AverTV DVB-T 761",
2319 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2324 .tuner_type = TUNER_ABSENT,
2325 .tuner_addr = ADDR_UNSET,
2330 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2331 /* andre.schwarz@matrix-vision.de */
2332 .name = "MATRIX Vision Sigma-SQ",
2334 /* .audio_inputs= 0, */
2337 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2338 .muxsel_hook = sigmaSQ_muxsel,
2342 .tuner_type = TUNER_ABSENT,
2343 .tuner_addr = ADDR_UNSET,
2345 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2346 /* andre.schwarz@matrix-vision.de */
2347 .name = "MATRIX Vision Sigma-SLC",
2349 /* .audio_inputs= 0, */
2352 .muxsel = MUXSEL(2, 2, 2, 2),
2353 .muxsel_hook = sigmaSLC_muxsel,
2357 .tuner_type = TUNER_ABSENT,
2358 .tuner_addr = ADDR_UNSET,
2360 /* BTTV_BOARD_APAC_VIEWCOMP */
2361 [BTTV_BOARD_APAC_VIEWCOMP] = {
2362 /* Attila Kondoros <attila.kondoros@chello.hu> */
2363 /* bt878 TV + FM 0x00000000 subsystem ID */
2364 .name = "APAC Viewcomp 878(AMAX)",
2366 /* .audio_inputs= 1, */
2369 .muxsel = MUXSEL(2, 3, 1, 1),
2370 .gpiomux = { 2, 0, 0, 0 },
2374 .tuner_type = TUNER_PHILIPS_PAL,
2375 .tuner_addr = ADDR_UNSET,
2376 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2377 .has_radio = 1, /* not every card has radio */
2380 /* ---- card 0x80 ---------------------------------- */
2381 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2382 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2383 .name = "DViCO FusionHDTV DVB-T Lite",
2390 .tuner_type = TUNER_ABSENT,
2391 .tuner_addr = ADDR_UNSET,
2393 [BTTV_BOARD_VGEAR_MYVCD] = {
2394 /* Steven <photon38@pchome.com.tw> */
2395 .name = "V-Gear MyVCD",
2397 /* .audio_inputs= 1, */
2400 .muxsel = MUXSEL(2, 3, 1, 0),
2401 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2405 .tuner_type = TUNER_PHILIPS_NTSC_M,
2406 .tuner_addr = ADDR_UNSET,
2409 [BTTV_BOARD_SUPER_TV] = {
2410 /* Rick C <cryptdragoon@gmail.com> */
2411 .name = "Super TV Tuner",
2413 /* .audio_inputs= 1, */
2415 .muxsel = MUXSEL(2, 3, 1, 0),
2416 .tuner_type = TUNER_PHILIPS_NTSC,
2417 .tuner_addr = ADDR_UNSET,
2418 .gpiomask = 0x008007,
2419 .gpiomux = { 0, 0x000001,0,0 },
2423 [BTTV_BOARD_TIBET_CS16] = {
2424 /* Chris Fanning <video4linux@haydon.net> */
2425 .name = "Tibet Systems 'Progress DVR' CS16",
2427 /* .audio_inputs= 0, */
2429 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2434 .tuner_type = TUNER_ABSENT,
2435 .tuner_addr = ADDR_UNSET,
2436 .muxsel_hook = tibetCS16_muxsel,
2438 [BTTV_BOARD_KODICOM_4400R] = {
2439 /* Bill Brack <wbrack@mmm.com.hk> */
2441 * Note that, because of the card's wiring, the "master"
2442 * BT878A chip (i.e. the one which controls the analog switch
2443 * and must use this card type) is the 2nd one detected. The
2444 * other 3 chips should use card type 0x85, whose description
2445 * follows this one. There is a EEPROM on the card (which is
2446 * connected to the I2C of one of those other chips), but is
2447 * not currently handled. There is also a facility for a
2448 * "monitor", which is also not currently implemented.
2450 .name = "Kodicom 4400R (master)",
2452 /* .audio_inputs= 0, */
2453 .tuner_type = TUNER_ABSENT,
2454 .tuner_addr = ADDR_UNSET,
2456 /* GPIO bits 0-9 used for analog switch:
2457 * 00 - 03: camera selector
2458 * 04 - 06: channel (controller) selector
2459 * 07: data (1->on, 0->off)
2462 * bit 16 is input from sync separator for the channel
2464 .gpiomask = 0x0003ff,
2466 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2471 .muxsel_hook = kodicom4400r_muxsel,
2473 [BTTV_BOARD_KODICOM_4400R_SL] = {
2474 /* Bill Brack <wbrack@mmm.com.hk> */
2475 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2476 * one which controls the analog switch, and must use the card type)
2477 * is the 2nd one detected. The other 3 chips should use this card
2480 .name = "Kodicom 4400R (slave)",
2482 /* .audio_inputs= 0, */
2483 .tuner_type = TUNER_ABSENT,
2484 .tuner_addr = ADDR_UNSET,
2486 .gpiomask = 0x010000,
2488 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2493 .muxsel_hook = kodicom4400r_muxsel,
2495 /* ---- card 0x86---------------------------------- */
2496 [BTTV_BOARD_ADLINK_RTV24] = {
2497 /* Michael Henson <mhenson@clarityvi.com> */
2498 /* Adlink RTV24 with special unlock codes */
2499 .name = "Adlink RTV24",
2501 /* .audio_inputs= 1, */
2503 .muxsel = MUXSEL(2, 3, 1, 0),
2504 .tuner_type = UNSET,
2505 .tuner_addr = ADDR_UNSET,
2508 /* ---- card 0x87---------------------------------- */
2509 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2510 /* Michael Krufky <mkrufky@m1k.net> */
2511 .name = "DViCO FusionHDTV 5 Lite",
2512 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2513 .tuner_addr = ADDR_UNSET,
2515 /* .audio_inputs= 1, */
2517 .muxsel = MUXSEL(2, 3, 1),
2518 .gpiomask = 0x00e00007,
2519 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2520 .gpiomute = 0x00c00007,
2526 /* ---- card 0x88---------------------------------- */
2527 [BTTV_BOARD_ACORP_Y878F] = {
2528 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2529 .name = "Acorp Y878F",
2531 /* .audio_inputs= 1, */
2533 .gpiomask = 0x01fe00,
2534 .muxsel = MUXSEL(2, 3, 1, 1),
2535 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2536 .gpiomute = 0x002000,
2539 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2540 .tuner_addr = 0xc1 >>1,
2543 /* ---- card 0x89 ---------------------------------- */
2544 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2545 .name = "Conceptronic CTVFMi v2",
2547 /* .audio_inputs= 1, */
2549 .gpiomask = 0x001c0007,
2550 .muxsel = MUXSEL(2, 3, 1, 1),
2551 .gpiomux = { 0, 1, 2, 2 },
2555 .tuner_type = TUNER_TENA_9533_DI,
2556 .tuner_addr = ADDR_UNSET,
2560 /* ---- card 0x8a ---------------------------------- */
2561 [BTTV_BOARD_PV_BT878P_2E] = {
2562 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2564 /* .audio_inputs= 1, */
2567 .gpiomask = 0x01fe00,
2568 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2569 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2570 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2571 .gpiomute = 0x12400,
2574 .tuner_type = TUNER_LG_PAL_FM,
2575 .tuner_addr = ADDR_UNSET,
2578 /* ---- card 0x8b ---------------------------------- */
2579 [BTTV_BOARD_PV_M4900] = {
2580 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2581 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2583 /* .audio_inputs= 1, */
2586 .muxsel = MUXSEL(2, 3, 1, 1),
2587 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2591 .tuner_type = TUNER_YMEC_TVF_5533MF,
2592 .tuner_addr = ADDR_UNSET,
2596 /* ---- card 0x8c ---------------------------------- */
2597 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2598 one external BNC composite input (mux 2)
2599 three internal composite inputs (unknown muxes)
2600 an 18-bit stereo A/D (CS5331A), which has:
2601 one external stereo unblanced (RCA) audio connection
2602 one (or 3?) internal stereo balanced (XLR) audio connection
2603 input is selected via gpio to a 14052B mux
2604 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2605 gain is controlled via an X9221A chip on the I2C bus @0x28
2606 sample rate is controlled via gpio to an MK1413S
2607 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2608 There is neither a tuner nor an svideo input. */
2609 [BTTV_BOARD_OSPREY440] = {
2610 .name = "Osprey 440",
2612 /* .audio_inputs= 2, */
2614 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2616 .gpiomute = 0x000, /* int + 32kHz */
2617 .gpiomux = { 0, 0, 0x000, 0x100},
2619 .tuner_type = TUNER_ABSENT,
2620 .tuner_addr = ADDR_UNSET,
2625 /* ---- card 0x8d ---------------------------------- */
2626 [BTTV_BOARD_ASOUND_SKYEYE] = {
2627 .name = "Asound Skyeye PCTV",
2629 /* .audio_inputs= 1, */
2632 .muxsel = MUXSEL(2, 3, 1, 1),
2633 .gpiomux = { 2, 0, 0, 0 },
2637 .tuner_type = TUNER_PHILIPS_NTSC,
2638 .tuner_addr = ADDR_UNSET,
2640 /* ---- card 0x8e ---------------------------------- */
2641 [BTTV_BOARD_SABRENT_TVFM] = {
2642 .name = "Sabrent TV-FM (bttv version)",
2644 /* .audio_inputs= 1, */
2646 .gpiomask = 0x108007,
2647 .muxsel = MUXSEL(2, 3, 1, 1),
2648 .gpiomux = { 100000, 100002, 100002, 100000 },
2653 .tuner_type = TUNER_TNF_5335MF,
2654 .tuner_addr = ADDR_UNSET,
2657 /* ---- card 0x8f ---------------------------------- */
2658 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2659 .name = "Hauppauge ImpactVCB (bt878)",
2661 /* .audio_inputs= 0, */
2663 .gpiomask = 0x0f, /* old: 7 */
2664 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2668 .tuner_type = TUNER_ABSENT,
2669 .tuner_addr = ADDR_UNSET,
2671 [BTTV_BOARD_MACHTV_MAGICTV] = {
2672 /* Julian Calaby <julian.calaby@gmail.com>
2673 * Slightly different from original MachTV definition (0x60)
2675 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2676 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2677 * properly (methinks) causing no keyup bits being set */
2679 .name = "MagicTV", /* rebranded MachTV */
2681 /* .audio_inputs= 1, */
2684 .muxsel = MUXSEL(2, 3, 1, 1),
2685 .gpiomux = { 0, 1, 2, 3 },
2687 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2688 .tuner_addr = ADDR_UNSET,
2693 [BTTV_BOARD_SSAI_SECURITY] = {
2694 .name = "SSAI Security Video Interface",
2696 /* .audio_inputs= 0, */
2698 .muxsel = MUXSEL(0, 1, 2, 3),
2699 .tuner_type = TUNER_ABSENT,
2700 .tuner_addr = ADDR_UNSET,
2702 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2703 .name = "SSAI Ultrasound Video Interface",
2705 /* .audio_inputs= 0, */
2707 .muxsel = MUXSEL(2, 0, 1, 3),
2708 .tuner_type = TUNER_ABSENT,
2709 .tuner_addr = ADDR_UNSET,
2711 /* ---- card 0x94---------------------------------- */
2712 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2713 .name = "DViCO FusionHDTV 2",
2714 .tuner_type = TUNER_PHILIPS_FCV1236D,
2715 .tuner_addr = ADDR_UNSET,
2717 /* .audio_inputs= 1, */
2719 .muxsel = MUXSEL(2, 3, 1),
2720 .gpiomask = 0x00e00007,
2721 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2722 .gpiomute = 0x00c00007,
2727 /* ---- card 0x95---------------------------------- */
2728 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2729 .name = "Typhoon TV-Tuner PCI (50684)",
2731 /* .audio_inputs= 1, */
2733 .gpiomask = 0x3014f,
2734 .muxsel = MUXSEL(2, 3, 1, 1),
2735 .gpiomux = { 0x20001,0x10001, 0, 0 },
2739 .tuner_type = TUNER_PHILIPS_PAL_I,
2740 .tuner_addr = ADDR_UNSET,
2742 [BTTV_BOARD_GEOVISION_GV600] = {
2744 .name = "Geovision GV-600",
2746 /* .audio_inputs= 0, */
2749 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2750 .muxsel_hook = geovision_muxsel,
2754 .tuner_type = TUNER_ABSENT,
2755 .tuner_addr = ADDR_UNSET,
2757 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2758 /* Mauro Lacy <mauro@lacy.com.ar>
2759 * Based on MagicTV and Conceptronic CONTVFMi */
2761 .name = "Kozumi KTV-01C",
2763 /* .audio_inputs= 1, */
2765 .gpiomask = 0x008007,
2766 .muxsel = MUXSEL(2, 3, 1, 1),
2767 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2768 .gpiomute = 3, /* CONTVFMi */
2770 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2771 .tuner_addr = ADDR_UNSET,
2776 [BTTV_BOARD_ENLTV_FM_2] = {
2777 /* Encore TV Tuner Pro ENL TV-FM-2
2778 Mauro Carvalho Chehab <mchehab@infradead.org */
2779 .name = "Encore ENL TV-FM-2",
2781 /* .audio_inputs= 1, */
2783 /* bit 6 -> IR disabled
2784 bit 18/17 = 00 -> mute
2785 01 -> enable external audio input
2786 10 -> internal audio input (mono?)
2787 11 -> internal audio input
2789 .gpiomask = 0x060040,
2790 .muxsel = MUXSEL(2, 3, 3),
2791 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2793 .tuner_type = TUNER_TCL_MF02GIP_5N,
2794 .tuner_addr = ADDR_UNSET,
2799 [BTTV_BOARD_VD012] = {
2800 /* D.Heer@Phytec.de */
2801 .name = "PHYTEC VD-012 (bt878)",
2803 /* .audio_inputs= 0, */
2806 .muxsel = MUXSEL(0, 2, 3, 1),
2807 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2810 .tuner_type = TUNER_ABSENT,
2811 .tuner_addr = ADDR_UNSET,
2813 [BTTV_BOARD_VD012_X1] = {
2814 /* D.Heer@Phytec.de */
2815 .name = "PHYTEC VD-012-X1 (bt878)",
2817 /* .audio_inputs= 0, */
2820 .muxsel = MUXSEL(2, 3, 1),
2821 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2824 .tuner_type = TUNER_ABSENT,
2825 .tuner_addr = ADDR_UNSET,
2827 [BTTV_BOARD_VD012_X2] = {
2828 /* D.Heer@Phytec.de */
2829 .name = "PHYTEC VD-012-X2 (bt878)",
2831 /* .audio_inputs= 0, */
2834 .muxsel = MUXSEL(3, 2, 1),
2835 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2838 .tuner_type = TUNER_ABSENT,
2839 .tuner_addr = ADDR_UNSET,
2841 [BTTV_BOARD_GEOVISION_GV800S] = {
2842 /* Bruno Christo <bchristo@inf.ufsm.br>
2844 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2845 * 1 audio input per BT878A = 4 audio inputs
2846 * 4 video inputs per BT878A = 16 video inputs
2847 * This is the first BT878A chip of the GV-800(S). It's the
2848 * "master" chip and it controls the video inputs through an
2849 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2850 * slaves should use card type 0x9e (following this one).
2851 * There is a EEPROM on the card which is currently not handled.
2852 * The audio input is not working yet.
2854 .name = "Geovision GV-800(S) (master)",
2856 /* .audio_inputs= 1, */
2857 .tuner_type = TUNER_ABSENT,
2858 .tuner_addr = ADDR_UNSET,
2860 .gpiomask = 0xf107f,
2862 .muxsel = MUXSEL(2, 2, 2, 2),
2867 .muxsel_hook = gv800s_muxsel,
2869 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2870 /* Bruno Christo <bchristo@inf.ufsm.br>
2872 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2873 * 1 audio input per BT878A = 4 audio inputs
2874 * 4 video inputs per BT878A = 16 video inputs
2875 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2876 * and should use this card type.
2877 * The audio input is not working yet.
2879 .name = "Geovision GV-800(S) (slave)",
2881 /* .audio_inputs= 1, */
2882 .tuner_type = TUNER_ABSENT,
2883 .tuner_addr = ADDR_UNSET,
2887 .muxsel = MUXSEL(2, 2, 2, 2),
2892 .muxsel_hook = gv800s_muxsel,
2894 [BTTV_BOARD_PV183] = {
2895 .name = "ProVideo PV183", /* 0x9f */
2897 /* .audio_inputs= 0, */
2900 .muxsel = MUXSEL(2, 3),
2905 .tuner_type = TUNER_ABSENT,
2906 .tuner_addr = ADDR_UNSET,
2910 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2912 /* ----------------------------------------------------------------------- */
2914 static unsigned char eeprom_data[256];
2919 void __devinit bttv_idcard(struct bttv *btv)
2921 unsigned int gpiobits;
2925 /* read PCI subsystem ID */
2926 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2927 btv->cardid = tmp << 16;
2928 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2931 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2932 /* look for the card */
2933 for (type = -1, i = 0; cards[i].id != 0; i++)
2934 if (cards[i].id == btv->cardid)
2939 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2940 "PCI subsystem ID is %04x:%04x\n",
2941 btv->c.nr,cards[type].name,cards[type].cardnr,
2942 btv->cardid & 0xffff,
2943 (btv->cardid >> 16) & 0xffff);
2944 btv->c.type = cards[type].cardnr;
2947 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2948 btv->c.nr, btv->cardid & 0xffff,
2949 (btv->cardid >> 16) & 0xffff);
2950 printk(KERN_DEBUG "please mail id, board name and "
2951 "the correct card= insmod option to linux-media@vger.kernel.org\n");
2955 /* let the user override the autodetected type */
2956 if (card[btv->c.nr] < bttv_num_tvcards)
2957 btv->c.type=card[btv->c.nr];
2959 /* print which card config we are using */
2960 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2961 bttv_tvcards[btv->c.type].name, btv->c.type,
2962 card[btv->c.nr] < bttv_num_tvcards
2963 ? "insmod option" : "autodetected");
2965 /* overwrite gpio stuff ?? */
2966 if (UNSET == audioall && UNSET == audiomux[0])
2969 if (UNSET != audiomux[0]) {
2971 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2972 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2973 gpiobits |= audiomux[i];
2976 gpiobits = audioall;
2977 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2978 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2981 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2982 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2983 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2984 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2985 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2991 * (most) board specific initialisations goes here
2994 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2995 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2999 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3000 type = BTTV_BOARD_MODTEC_205;
3001 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3002 type = BTTV_BOARD_EURESYS_PICOLO;
3003 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3004 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3008 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3009 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3013 static void flyvideo_gpio(struct bttv *btv)
3015 int gpio, has_remote, has_radio, is_capture_only;
3016 int is_lr90, has_tda9820_tda9821;
3017 int tuner_type = UNSET, ttype;
3019 gpio_inout(0xffffff, 0);
3020 udelay(8); /* without this we would see the 0x1800 mask */
3022 /* FIXME: must restore OUR_EN ??? */
3024 /* all cards provide GPIO info, some have an additional eeprom
3025 * LR50: GPIO coding can be found lower right CP1 .. CP9
3026 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3028 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3030 * lowest 3 bytes are remote control codes (no handshake needed)
3031 * xxxFFF: No remote control chip soldered
3032 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3033 * Note: Some bits are Audio_Mask !
3035 ttype = (gpio & 0x0f0000) >> 16;
3038 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3041 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3044 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3047 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3050 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3053 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3057 has_remote = gpio & 0x800000;
3058 has_radio = gpio & 0x400000;
3059 /* unknown 0x200000;
3060 * unknown2 0x100000; */
3061 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3062 has_tda9820_tda9821 = !(gpio & 0x004000);
3063 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3065 * gpio & 0x001000 output bit for audio routing */
3067 if (is_capture_only)
3068 tuner_type = TUNER_ABSENT; /* No tuner present */
3070 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3071 btv->c.nr, has_radio ? "yes" : "no ",
3072 has_remote ? "yes" : "no ", tuner_type, gpio);
3073 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3074 btv->c.nr, is_lr90 ? "yes" : "no ",
3075 has_tda9820_tda9821 ? "yes" : "no ",
3076 is_capture_only ? "yes" : "no ");
3078 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3079 btv->tuner_type = tuner_type;
3080 btv->has_radio = has_radio;
3082 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3083 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3084 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3085 if (has_tda9820_tda9821)
3086 btv->audio_mode_gpio = lt9415_audio;
3087 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3090 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3091 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3092 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3093 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3095 static void miro_pinnacle_gpio(struct bttv *btv)
3100 gpio_inout(0xffffff, 0);
3102 id = ((gpio>>10) & 63) -1;
3103 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3105 btv->tuner_type = miro_tunermap[id];
3106 if (0 == (gpio & 0x20)) {
3108 if (!miro_fmtuner[id]) {
3109 btv->has_matchbox = 1;
3110 btv->mbox_we = (1<<6);
3111 btv->mbox_most = (1<<7);
3112 btv->mbox_clk = (1<<8);
3113 btv->mbox_data = (1<<9);
3114 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3120 if (btv->c.type == BTTV_BOARD_MIRO)
3121 btv->c.type = BTTV_BOARD_MIROPRO;
3122 if (btv->c.type == BTTV_BOARD_PINNACLE)
3123 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3126 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3127 btv->c.nr, id+1, btv->tuner_type,
3128 !btv->has_radio ? "no" :
3129 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3130 (-1 == msp) ? "no" : "yes");
3132 /* new cards with microtune tuner */
3137 info = "PAL / mono";
3138 btv->tda9887_conf = TDA9887_INTERCARRIER;
3141 info = "PAL+SECAM / stereo";
3143 btv->tda9887_conf = TDA9887_QSS;
3146 info = "NTSC / stereo";
3148 btv->tda9887_conf = TDA9887_QSS;
3151 info = "PAL+SECAM / mono";
3152 btv->tda9887_conf = TDA9887_QSS;
3155 info = "NTSC / mono";
3156 btv->tda9887_conf = TDA9887_INTERCARRIER;
3159 info = "NTSC / stereo";
3160 btv->tda9887_conf = TDA9887_INTERCARRIER;
3163 info = "PAL / stereo";
3164 btv->tda9887_conf = TDA9887_INTERCARRIER;
3167 info = "oops: unknown card";
3171 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3173 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3174 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3175 btv->tuner_type = TUNER_MT2032;
3179 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3180 #define LM1882_SYNC_DRIVE 0x200000L
3182 static void init_ids_eagle(struct bttv *btv)
3184 gpio_inout(0xffffff,0xFFFF37);
3185 gpio_write(0x200020);
3187 /* flash strobe inverter ?! */
3188 gpio_write(0x200024);
3190 /* switch sync drive off */
3191 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3193 /* set BT848 muxel to 2 */
3194 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3197 /* Muxsel helper for the IDS Eagle.
3198 * the eagles does not use the standard muxsel-bits but
3199 * has its own multiplexer */
3200 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3202 gpio_bits(3, input & 3);
3205 /* set chroma ADC to sleep */
3206 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3207 /* set to composite video */
3208 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3209 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3211 /* switch sync drive off */
3212 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3215 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3217 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3218 gpio_write(masks[input%4]);
3221 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3224 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3225 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3227 IN - sensor inputs, INx - sensor inputs and TI XORed together
3228 O1,O2,O3 - alarm outputs (relays)
3230 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3234 static void init_lmlbt4x(struct bttv *btv)
3236 printk(KERN_DEBUG "LMLBT4x init\n");
3237 btwrite(0x000000, BT848_GPIO_REG_INP);
3238 gpio_inout(0xffffff, 0x0006C0);
3239 gpio_write(0x000000);
3242 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3244 unsigned int inmux = input % 8;
3245 gpio_inout( 0xf, 0xf );
3246 gpio_bits( 0xf, inmux );
3249 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3251 unsigned int inmux = input % 4;
3252 gpio_inout( 3<<9, 3<<9 );
3253 gpio_bits( 3<<9, inmux<<9 );
3256 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3258 unsigned int inmux = input % 16;
3259 gpio_inout(0xf, 0xf);
3260 gpio_bits(0xf, inmux);
3263 /* ----------------------------------------------------------------------- */
3265 static void bttv_reset_audio(struct bttv *btv)
3268 * BT878A has a audio-reset register.
3269 * 1. This register is an audio reset function but it is in
3270 * function-0 (video capture) address space.
3271 * 2. It is enough to do this once per power-up of the card.
3272 * 3. There is a typo in the Conexant doc -- it is not at
3273 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3274 * --//Shrikumar 030609
3280 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3281 btwrite((1<<7), 0x058);
3286 /* initialization part one -- before registering i2c bus */
3287 void __devinit bttv_init_card1(struct bttv *btv)
3289 switch (btv->c.type) {
3290 case BTTV_BOARD_HAUPPAUGE:
3291 case BTTV_BOARD_HAUPPAUGE878:
3292 boot_msp34xx(btv,5);
3294 case BTTV_BOARD_VOODOOTV_200:
3295 case BTTV_BOARD_VOODOOTV_FM:
3296 boot_msp34xx(btv,20);
3298 case BTTV_BOARD_AVERMEDIA98:
3299 boot_msp34xx(btv,11);
3301 case BTTV_BOARD_HAUPPAUGEPVR:
3304 case BTTV_BOARD_TWINHAN_DST:
3305 case BTTV_BOARD_AVDVBT_771:
3306 case BTTV_BOARD_PINNACLESAT:
3307 btv->use_i2c_hw = 1;
3309 case BTTV_BOARD_ADLINK_RTV24:
3314 if (!bttv_tvcards[btv->c.type].has_dvb)
3315 bttv_reset_audio(btv);
3318 /* initialization part two -- after registering i2c bus */
3319 void __devinit bttv_init_card2(struct bttv *btv)
3321 int addr=ADDR_UNSET;
3323 btv->tuner_type = UNSET;
3325 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3326 bttv_readee(btv,eeprom_data,0xa0);
3327 identify_by_eeprom(btv,eeprom_data);
3330 switch (btv->c.type) {
3331 case BTTV_BOARD_MIRO:
3332 case BTTV_BOARD_MIROPRO:
3333 case BTTV_BOARD_PINNACLE:
3334 case BTTV_BOARD_PINNACLEPRO:
3336 miro_pinnacle_gpio(btv);
3338 case BTTV_BOARD_FLYVIDEO_98:
3339 case BTTV_BOARD_MAXI:
3340 case BTTV_BOARD_LIFE_FLYKIT:
3341 case BTTV_BOARD_FLYVIDEO:
3342 case BTTV_BOARD_TYPHOON_TVIEW:
3343 case BTTV_BOARD_CHRONOS_VS2:
3344 case BTTV_BOARD_FLYVIDEO_98FM:
3345 case BTTV_BOARD_FLYVIDEO2000:
3346 case BTTV_BOARD_FLYVIDEO98EZ:
3347 case BTTV_BOARD_CONFERENCETV:
3348 case BTTV_BOARD_LIFETEC_9415:
3351 case BTTV_BOARD_HAUPPAUGE:
3352 case BTTV_BOARD_HAUPPAUGE878:
3353 case BTTV_BOARD_HAUPPAUGEPVR:
3354 /* pick up some config infos from the eeprom */
3355 bttv_readee(btv,eeprom_data,0xa0);
3356 hauppauge_eeprom(btv);
3358 case BTTV_BOARD_AVERMEDIA98:
3359 case BTTV_BOARD_AVPHONE98:
3360 bttv_readee(btv,eeprom_data,0xa0);
3361 avermedia_eeprom(btv);
3363 case BTTV_BOARD_PXC200:
3366 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3367 picolo_tetra_init(btv);
3369 case BTTV_BOARD_VHX:
3371 btv->has_matchbox = 1;
3372 btv->mbox_we = 0x20;
3374 btv->mbox_clk = 0x08;
3375 btv->mbox_data = 0x10;
3376 btv->mbox_mask = 0x38;
3378 case BTTV_BOARD_VOBIS_BOOSTAR:
3379 case BTTV_BOARD_TERRATV:
3380 terratec_active_radio_upgrade(btv);
3382 case BTTV_BOARD_MAGICTVIEW061:
3383 if (btv->cardid == 0x3002144f) {
3385 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3388 case BTTV_BOARD_STB2:
3389 if (btv->cardid == 0x3060121a) {
3390 /* Fix up entry for 3DFX VoodooTV 100,
3391 which is an OEM STB card variant. */
3393 btv->tuner_type=TUNER_TEMIC_NTSC;
3396 case BTTV_BOARD_OSPREY1x0:
3397 case BTTV_BOARD_OSPREY1x0_848:
3398 case BTTV_BOARD_OSPREY101_848:
3399 case BTTV_BOARD_OSPREY1x1:
3400 case BTTV_BOARD_OSPREY1x1_SVID:
3401 case BTTV_BOARD_OSPREY2xx:
3402 case BTTV_BOARD_OSPREY2x0_SVID:
3403 case BTTV_BOARD_OSPREY2x0:
3404 case BTTV_BOARD_OSPREY440:
3405 case BTTV_BOARD_OSPREY500:
3406 case BTTV_BOARD_OSPREY540:
3407 case BTTV_BOARD_OSPREY2000:
3408 bttv_readee(btv,eeprom_data,0xa0);
3409 osprey_eeprom(btv, eeprom_data);
3411 case BTTV_BOARD_IDS_EAGLE:
3412 init_ids_eagle(btv);
3414 case BTTV_BOARD_MODTEC_205:
3415 bttv_readee(btv,eeprom_data,0xa0);
3418 case BTTV_BOARD_LMLBT4:
3421 case BTTV_BOARD_TIBET_CS16:
3422 tibetCS16_init(btv);
3424 case BTTV_BOARD_KODICOM_4400R:
3425 kodicom4400r_init(btv);
3427 case BTTV_BOARD_GEOVISION_GV800S:
3432 /* pll configuration */
3433 if (!(btv->id==848 && btv->revision==0x11)) {
3434 /* defaults from card list */
3435 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3436 btv->pll.pll_ifreq=28636363;
3437 btv->pll.pll_crystal=BT848_IFORM_XT0;
3439 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3440 btv->pll.pll_ifreq=35468950;
3441 btv->pll.pll_crystal=BT848_IFORM_XT1;
3443 /* insmod options can override */
3444 switch (pll[btv->c.nr]) {
3446 btv->pll.pll_crystal = 0;
3447 btv->pll.pll_ifreq = 0;
3448 btv->pll.pll_ofreq = 0;
3450 case 1: /* 28 MHz */
3452 btv->pll.pll_ifreq = 28636363;
3453 btv->pll.pll_ofreq = 0;
3454 btv->pll.pll_crystal = BT848_IFORM_XT0;
3456 case 2: /* 35 MHz */
3458 btv->pll.pll_ifreq = 35468950;
3459 btv->pll.pll_ofreq = 0;
3460 btv->pll.pll_crystal = BT848_IFORM_XT1;
3464 btv->pll.pll_current = -1;
3466 /* tuner configuration (from card list / autodetect / insmod option) */
3467 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3468 addr = bttv_tvcards[btv->c.type].tuner_addr;
3470 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3471 if (UNSET == btv->tuner_type)
3472 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3473 if (UNSET != tuner[btv->c.nr])
3474 btv->tuner_type = tuner[btv->c.nr];
3476 if (btv->tuner_type == TUNER_ABSENT)
3477 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3478 else if(btv->tuner_type == UNSET)
3479 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3481 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3484 if (UNSET == btv->tuner_type)
3485 btv->tuner_type = TUNER_ABSENT;
3487 if (btv->tuner_type != TUNER_ABSENT) {
3488 struct tuner_setup tun_setup;
3490 /* Load tuner module before issuing tuner config call! */
3492 request_module("tuner");
3494 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3495 tun_setup.type = btv->tuner_type;
3496 tun_setup.addr = addr;
3498 if (bttv_tvcards[btv->c.type].has_radio)
3499 tun_setup.mode_mask |= T_RADIO;
3501 bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
3504 if (btv->tda9887_conf) {
3505 struct v4l2_priv_tun_config tda9887_cfg;
3507 tda9887_cfg.tuner = TUNER_TDA9887;
3508 tda9887_cfg.priv = &btv->tda9887_conf;
3510 bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
3513 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3514 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3515 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3516 UNSET : bttv_tvcards[btv->c.type].svhs;
3517 if (svhs[btv->c.nr] != UNSET)
3518 btv->svhs = svhs[btv->c.nr];
3519 if (remote[btv->c.nr] != UNSET)
3520 btv->has_remote = remote[btv->c.nr];
3522 if (bttv_tvcards[btv->c.type].has_radio)
3524 if (bttv_tvcards[btv->c.type].has_remote)
3526 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3528 if (bttv_tvcards[btv->c.type].volume_gpio)
3529 btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
3530 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3531 btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
3536 if (btv->tuner_type == TUNER_ABSENT)
3537 return; /* no tuner or related drivers to load */
3539 /* try to detect audio/fader chips */
3540 if (!bttv_tvcards[btv->c.type].no_msp34xx &&
3541 bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
3542 request_module("msp3400");
3544 if (bttv_tvcards[btv->c.type].msp34xx_alt &&
3545 bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
3546 request_module("msp3400");
3548 if (!bttv_tvcards[btv->c.type].no_tda9875 &&
3549 bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
3550 request_module("tda9875");
3552 if (!bttv_tvcards[btv->c.type].no_tda7432 &&
3553 bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
3554 request_module("tda7432");
3556 if (bttv_tvcards[btv->c.type].needs_tvaudio)
3557 request_module("tvaudio");
3561 /* ----------------------------------------------------------------------- */
3563 static void modtec_eeprom(struct bttv *btv)
3565 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3566 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3567 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3568 btv->c.nr,&eeprom_data[0x1e]);
3569 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3570 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3571 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3572 btv->c.nr,&eeprom_data[0x1e]);
3573 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3574 btv->tuner_type=TUNER_PHILIPS_NTSC;
3575 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3576 btv->c.nr,&eeprom_data[0x1e]);
3578 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3579 btv->c.nr,&eeprom_data[0x1e]);
3583 static void __devinit hauppauge_eeprom(struct bttv *btv)
3587 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3588 btv->tuner_type = tv.tuner_type;
3589 btv->has_radio = tv.has_radio;
3591 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3592 btv->c.nr, tv.model);
3595 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3596 * type based on model #.
3598 if(tv.model == 64900) {
3599 printk("bttv%d: Switching board type from %s to %s\n",
3601 bttv_tvcards[btv->c.type].name,
3602 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3603 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3607 static int terratec_active_radio_upgrade(struct bttv *btv)
3612 btv->has_matchbox = 1;
3613 btv->mbox_we = 0x10;
3614 btv->mbox_most = 0x20;
3615 btv->mbox_clk = 0x08;
3616 btv->mbox_data = 0x04;
3617 btv->mbox_mask = 0x3c;
3619 btv->mbox_iow = 1 << 8;
3620 btv->mbox_ior = 1 << 9;
3621 btv->mbox_csel = 1 << 10;
3624 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3625 if (0x1ed8 == tea5757_read(btv)) {
3626 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3629 btv->has_matchbox = 1;
3632 btv->has_matchbox = 0;
3638 /* ----------------------------------------------------------------------- */
3641 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3643 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3644 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3645 * unpacked with unzip).
3647 #define PVR_GPIO_DELAY 10
3649 #define BTTV_ALT_DATA 0x000001
3650 #define BTTV_ALT_DCLK 0x100000
3651 #define BTTV_ALT_NCONFIG 0x800000
3653 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3660 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3662 udelay(PVR_GPIO_DELAY);
3664 gpio_write(BTTV_ALT_NCONFIG);
3665 udelay(PVR_GPIO_DELAY);
3667 for (n = 0; n < microlen; n++) {
3669 for (i = 0 ; i < 8 ; i++) {
3670 gpio_bits(BTTV_ALT_DCLK,0);
3672 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3674 gpio_bits(BTTV_ALT_DATA,0);
3675 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3679 gpio_bits(BTTV_ALT_DCLK,0);
3680 udelay(PVR_GPIO_DELAY);
3682 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3683 for (i = 0 ; i < 30 ; i++) {
3684 gpio_bits(BTTV_ALT_DCLK,0);
3685 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3687 gpio_bits(BTTV_ALT_DCLK,0);
3691 static int __devinit pvr_boot(struct bttv *btv)
3693 const struct firmware *fw_entry;
3696 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3698 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3702 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3703 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3704 btv->c.nr, (rc < 0) ? "failed" : "ok");
3705 release_firmware(fw_entry);
3709 /* ----------------------------------------------------------------------- */
3710 /* some osprey specific stuff */
3712 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3718 /* This code will nevery actually get called in this case.... */
3719 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3720 /* this might be an antique... check for MMAC label in eeprom */
3721 if (!strncmp(ee, "MMAC", 4)) {
3723 for (i = 0; i < 21; i++)
3725 if (checksum != ee[21])
3727 cardid = BTTV_BOARD_OSPREY1x0_848;
3728 for (i = 12; i < 21; i++)
3729 serial *= 10, serial += ee[i] - '0';
3732 unsigned short type;
3734 for (i = 4*16; i < 8*16; i += 16) {
3735 u16 checksum = ip_compute_csum(ee + i, 16);
3737 if ((checksum&0xff) + (checksum>>8) == 0xff)
3744 /* found a valid descriptor */
3745 type = get_unaligned_be16((__be16 *)(ee+4));
3750 cardid = BTTV_BOARD_OSPREY1x0_848;
3753 cardid = BTTV_BOARD_OSPREY101_848;
3759 cardid = BTTV_BOARD_OSPREY1x0;
3763 cardid = BTTV_BOARD_OSPREY1x1;
3768 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3774 cardid = BTTV_BOARD_OSPREY2xx;
3778 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3781 cardid = BTTV_BOARD_OSPREY500;
3785 cardid = BTTV_BOARD_OSPREY540;
3786 /* bttv_osprey_540_init(btv); */
3791 cardid = BTTV_BOARD_OSPREY2x0;
3792 /* enable output on select control lines */
3793 gpio_inout(0xffffff,0x000303);
3796 cardid = BTTV_BOARD_OSPREY440;
3799 /* unknown...leave generic, but get serial # */
3800 printk(KERN_INFO "bttv%d: "
3801 "osprey eeprom: unknown card type 0x%04x\n",
3805 serial = get_unaligned_be32((__be32 *)(ee+6));
3808 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3810 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3812 if (cardid<0 || btv->c.type == cardid)
3815 /* card type isn't set correctly */
3816 if (card[btv->c.nr] < bttv_num_tvcards) {
3817 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3818 "Not overriding user specified card type\n", btv->c.nr);
3820 printk(KERN_INFO "bttv%d: osprey eeprom: "
3821 "Changing card type from %d to %d\n", btv->c.nr,
3822 btv->c.type, cardid);
3823 btv->c.type = cardid;
3827 /* ----------------------------------------------------------------------- */
3828 /* AVermedia specific stuff, from bktr_card.c */
3830 static int tuner_0_table[] = {
3831 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3832 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3833 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3834 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3835 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3836 TUNER_PHILIPS_FM1216ME_MK3 };
3838 static int tuner_1_table[] = {
3839 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3840 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3841 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3842 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3843 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3845 static void __devinit avermedia_eeprom(struct bttv *btv)
3847 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3849 tuner_make = (eeprom_data[0x41] & 0x7);
3850 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3851 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3852 btv->has_remote = (eeprom_data[0x42] & 0x01);
3854 if (tuner_make == 0 || tuner_make == 2)
3855 if (tuner_format <= 0x0a)
3856 tuner_type = tuner_0_table[tuner_format];
3857 if (tuner_make == 1)
3858 if (tuner_format <= 9)
3859 tuner_type = tuner_1_table[tuner_format];
3861 if (tuner_make == 4)
3862 if (tuner_format == 0x09)
3863 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3865 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3866 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3868 btv->tuner_type = tuner_type;
3869 printk(KERN_CONT "%d", tuner_type);
3871 printk(KERN_CONT "Unknown type");
3872 printk(KERN_CONT " radio:%s remote control:%s\n",
3873 tuner_tv_fm ? "yes" : "no",
3874 btv->has_remote ? "yes" : "no");
3878 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3879 * analog demod, which is not I2C controlled like the newer and more common
3880 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3881 * that control the IF for the video and audio. Apparently, bttv GPIO
3882 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3883 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3885 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3888 if (btv->audio == TVAUDIO_INPUT_TUNER) {
3889 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
3890 gpiobits |= 0x10000;
3892 gpiobits &= ~0x10000;
3895 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
3901 * reset/enable the MSP on some Hauppauge cards
3902 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
3907 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
3909 int mask = (1 << pin);
3911 gpio_inout(mask,mask);
3915 gpio_bits(mask,mask);
3918 bttv_gpio_tracking(btv,"msp34xx");
3920 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
3921 "init [%d]\n", btv->c.nr, pin);
3924 /* ----------------------------------------------------------------------- */
3925 /* Imagenation L-Model PXC200 Framegrabber */
3926 /* This is basically the same procedure as
3927 * used by Alessandro Rubini in his pxc200
3928 * driver, but using BTTV functions */
3930 static void __devinit init_PXC200(struct bttv *btv)
3932 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
3933 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
3939 /* Initialise GPIO-connevted stuff */
3940 gpio_inout(0xffffff, (1<<13));
3944 /* GPIO inputs are pulled up, so no need to drive
3945 * reset pin any longer */
3946 gpio_bits(0xffffff, 0);
3948 bttv_gpio_tracking(btv,"pxc200");
3950 /* we could/should try and reset/control the AD pots? but
3951 right now we simply turned off the crushing. Without
3952 this the AGC drifts drifts
3953 remember the EN is reverse logic -->
3954 setting BT848_ADC_AGC_EN disable the AGC
3955 tboult@eecs.lehigh.edu
3958 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
3960 /* Initialise MAX517 DAC */
3961 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
3962 bttv_I2CWrite(btv,0x5E,0,0x80,1);
3964 /* Initialise 12C508 PIC */
3965 /* The I2CWrite and I2CRead commmands are actually to the
3966 * same chips - but the R/W bit is included in the address
3967 * argument so the numbers are different */
3970 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
3972 /* First of all, enable the clock line. This is used in the PXC200-F */
3973 val = btread(BT848_GPIO_DMA_CTL);
3974 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
3975 btwrite(val, BT848_GPIO_DMA_CTL);
3977 /* Then, push to 0 the reset pin long enough to reset the *
3978 * device same as above for the reset line, but not the same
3979 * value sent to the GPIO-connected stuff
3980 * which one is the good one? */
3981 gpio_inout(0xffffff,(1<<2));
3986 for (i = 0; i < ARRAY_SIZE(vals); i++) {
3987 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
3990 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
3991 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
3995 printk(KERN_INFO "PXC200 Initialised.\n");
4000 /* ----------------------------------------------------------------------- */
4002 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4003 * it. This apparently involves the following procedure for each 878 chip:
4005 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4007 * 2) write to GPIO_DATA
4013 * read from GPIO_DATA into buf (uint_32)
4014 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4015 * error. ERROR_CPLD_Check_Failed stop.
4017 * 3) write to GPIO_DATA
4018 * - write 0x4400 + 0x0E
4020 * - write 0x4410 + 0x0E
4023 * read from GPIO_DATA into buf (uint_32)
4024 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4025 * error. ERROR_CPLD_Check_Failed.
4027 /* ----------------------------------------------------------------------- */
4029 init_RTV24 (struct bttv *btv)
4031 uint32_t dataRead = 0;
4032 long watchdog_value = 0x0E;
4035 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4038 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4040 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4042 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4044 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4046 dataRead = btread (BT848_GPIO_DATA);
4048 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4050 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4051 btv->c.nr, dataRead);
4054 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4056 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4058 btwrite (watchdog_value, BT848_GPIO_DATA);
4060 dataRead = btread (BT848_GPIO_DATA);
4062 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4064 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4065 btv->c.nr, dataRead);
4071 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4076 /* ----------------------------------------------------------------------- */
4077 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4079 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4080 * This code is placed under the terms of the GNU General Public License
4082 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4085 static void bus_low(struct bttv *btv, int bit)
4087 if (btv->mbox_ior) {
4088 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4089 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4096 if (btv->mbox_ior) {
4097 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4102 static void bus_high(struct bttv *btv, int bit)
4104 if (btv->mbox_ior) {
4105 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4106 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4113 if (btv->mbox_ior) {
4114 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4119 static int bus_in(struct bttv *btv, int bit)
4121 if (btv->mbox_ior) {
4122 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4123 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4126 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4129 return gpio_read() & (bit);
4132 /* TEA5757 register bits */
4133 #define TEA_FREQ 0:14
4134 #define TEA_BUFFER 15:15
4136 #define TEA_SIGNAL_STRENGTH 16:17
4138 #define TEA_PORT1 18:18
4139 #define TEA_PORT0 19:19
4141 #define TEA_BAND 20:21
4142 #define TEA_BAND_FM 0
4143 #define TEA_BAND_MW 1
4144 #define TEA_BAND_LW 2
4145 #define TEA_BAND_SW 3
4147 #define TEA_MONO 22:22
4148 #define TEA_ALLOW_STEREO 0
4149 #define TEA_FORCE_MONO 1
4151 #define TEA_SEARCH_DIRECTION 23:23
4152 #define TEA_SEARCH_DOWN 0
4153 #define TEA_SEARCH_UP 1
4155 #define TEA_STATUS 24:24
4156 #define TEA_STATUS_TUNED 0
4157 #define TEA_STATUS_SEARCHING 1
4159 /* Low-level stuff */
4160 static int tea5757_read(struct bttv *btv)
4162 unsigned long timeout;
4166 /* better safe than sorry */
4167 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4169 if (btv->mbox_ior) {
4170 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4171 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4176 bttv_gpio_tracking(btv,"tea5757 read");
4178 bus_low(btv,btv->mbox_we);
4179 bus_low(btv,btv->mbox_clk);
4182 timeout= jiffies + msecs_to_jiffies(1000);
4184 /* wait for DATA line to go low; error if it doesn't */
4185 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4187 if (bus_in(btv,btv->mbox_data)) {
4188 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4192 dprintk("bttv%d: tea5757:",btv->c.nr);
4193 for (i = 0; i < 24; i++) {
4195 bus_high(btv,btv->mbox_clk);
4197 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4198 bus_low(btv,btv->mbox_clk);
4200 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4201 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4203 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4207 static int tea5757_write(struct bttv *btv, int value)
4212 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4214 if (btv->mbox_ior) {
4215 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4216 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4220 bttv_gpio_tracking(btv,"tea5757 write");
4222 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4223 bus_low(btv,btv->mbox_clk);
4224 bus_high(btv,btv->mbox_we);
4225 for (i = 0; i < 25; i++) {
4226 if (reg & 0x1000000)
4227 bus_high(btv,btv->mbox_data);
4229 bus_low(btv,btv->mbox_data);
4231 bus_high(btv,btv->mbox_clk);
4233 bus_low(btv,btv->mbox_clk);
4236 bus_low(btv,btv->mbox_we); /* unmute !!! */
4240 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4242 dprintk("tea5757_set_freq %d\n",freq);
4243 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4246 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4248 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4249 * switch instead (CD22M3494E). This IC can have multiple active connections
4250 * between Xn (input) and Yn (output) pins. We need to clear any existing
4251 * connection prior to establish a new one, pulsing the STROBE pin.
4253 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4254 * GPIO pins are wired as:
4255 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4256 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4257 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4258 * GPIO[8] - - P3[5] (microcontroller)
4259 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4260 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4261 * GPINTR - - P3[4] (microcontroller)
4263 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4264 * configuration either directly (as we are doing) or using the microcontroller
4265 * which is also wired to I2C interface. I have no further info on the
4266 * microcontroller features, one would need to disassembly the firmware.
4267 * note: the vendor refused to give any information on this product, all
4268 * that stuff was found using a multimeter! :)
4270 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4272 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4273 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4275 gpio_bits(0x07f, muxgpio[input]);
4277 /* reset all conections */
4278 gpio_bits(0x200,0x200);
4280 gpio_bits(0x200,0x000);
4283 /* create a new connection */
4284 gpio_bits(0x480,0x480);
4286 gpio_bits(0x480,0x080);
4290 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4292 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4293 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4294 * chips, ten eight input analog multiplexors, a not chip and a few
4297 * 16 inputs on a secondary bracket are provided and can be selected
4298 * from each of the four capture chips. Two of the eight input
4299 * multiplexors are used to select from any of the 16 input signals.
4301 * Unsupported hardware capabilities:
4302 * . A video output monitor on the secondary bracket can be selected from
4303 * one of the 878A chips.
4304 * . Another passthrough but I haven't spent any time investigating it.
4305 * . Digital I/O (logic level connected to GPIO) is available from an
4308 * The on chip input mux should always be set to 2.
4309 * GPIO[16:19] - Video input selection
4310 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4311 * GPIO[?:?] - Digital I/O.
4313 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4314 * determined what function (if any) it provides. With the microcontroller
4315 * and sync seperator chips a guess is that it might have to do with video
4316 * switching and maybe some digital I/O.
4318 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4321 gpio_bits(0x0f0000, input << 16);
4324 static void tibetCS16_init(struct bttv *btv)
4326 /* enable gpio bits, mask obtained via btSpy */
4327 gpio_inout(0xffffff, 0x0f7fff);
4328 gpio_write(0x0f7fff);
4332 * The following routines for the Kodicom-4400r get a little mind-twisting.
4333 * There is a "master" controller and three "slave" controllers, together
4334 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4335 * The analog switch is controlled by the "master", but the detection order
4336 * of the four BT878A chips is in an order which I just don't understand.
4337 * The "master" is actually the second controller to be detected. The
4338 * logic on the board uses logical numbers for the 4 controllers, but
4339 * those numbers are different from the detection sequence. When working
4340 * with the analog switch, we need to "map" from the detection sequence
4341 * over to the board's logical controller number. This mapping sequence
4342 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4343 * unit 3, the second (which is the master) is logical unit 0, etc.
4344 * We need to maintain the status of the analog switch (which of the 16
4345 * cameras is connected to which of the 4 controllers). Rather than
4346 * add to the bttv structure for this, we use the data reserved for
4347 * the mbox (unused for this card type).
4351 * First a routine to set the analog switch, which controls which camera
4352 * is routed to which controller. The switch comprises an X-address
4353 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4354 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4355 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4356 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4357 * specified address. The idea is to set the address and data, then bring
4358 * STROBE high, and finally bring STROBE back to low.
4360 static void kodicom4400r_write(struct bttv *btv,
4361 unsigned char xaddr,
4362 unsigned char yaddr,
4363 unsigned char data) {
4366 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4367 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4368 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4369 gpio_bits(0x1ff, udata); /* strobe low */
4373 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4374 * use this routine. The routine finds the "master" for the card, maps
4375 * the controller number from the detected position over to the logical
4376 * number, writes the appropriate data to the analog switch, and housekeeps
4377 * the local copy of the switch information. The parameter 'input' is the
4378 * requested camera number (0 - 15).
4380 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4385 static unsigned char map[4] = {3, 0, 2, 1};
4387 mctlr = master[btv->c.nr];
4388 if (mctlr == NULL) { /* ignore if master not yet detected */
4391 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4393 sw_status = (char *)(&mctlr->mbox_we);
4394 xaddr = input & 0xf;
4395 /* Check if the controller/camera pair has changed, else ignore */
4396 if (sw_status[yaddr] != xaddr)
4398 /* "open" the old switch, "close" the new one, save the new */
4399 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4400 sw_status[yaddr] = xaddr;
4401 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4406 * During initialisation, we need to reset the analog switch. We
4407 * also preset the switch to map the 4 connectors on the card to the
4408 * *user's* (see above description of kodicom4400r_muxsel) channels
4411 static void kodicom4400r_init(struct bttv *btv)
4413 char *sw_status = (char *)(&btv->mbox_we);
4416 gpio_inout(0x0003ff, 0x0003ff);
4417 gpio_write(1 << 9); /* reset MUX */
4419 /* Preset camera 0 to the 4 controllers */
4420 for (ix = 0; ix < 4; ix++) {
4422 kodicom4400r_write(btv, ix, ix, 1);
4425 * Since this is the "master", we need to set up the
4426 * other three controller chips' pointers to this structure
4427 * for later use in the muxsel routine.
4429 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4431 master[btv->c.nr-1] = btv;
4432 master[btv->c.nr] = btv;
4433 master[btv->c.nr+1] = btv;
4434 master[btv->c.nr+2] = btv;
4437 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4438 * video multiplexers to provide up to 16 video inputs. These
4439 * multiplexers are controlled by the lower 8 GPIO pins of the
4440 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4442 * xxx0 is pin xxx of multiplexer U5,
4443 * yyy1 is pin yyy of multiplexer U2
4455 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4457 static const int masks[] = {
4458 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4459 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4460 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4461 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4463 gpio_write(masks[input%16]);
4465 static void picolo_tetra_init(struct bttv *btv)
4467 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4468 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4469 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4471 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4474 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4475 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4476 /*GPIO[20]&GPIO[21] used to choose the right input*/
4477 btwrite (input<<20,BT848_GPIO_DATA);
4482 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4484 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4485 * swichers to provide 16 channels to MUX0. The TDA8540's have
4486 * 4 independent outputs and as such the IVC120G also has the
4487 * optional "Monitor Out" bus. This allows the card to be looking
4488 * at one input while the monitor is looking at another.
4490 * Since I've couldn't be bothered figuring out how to add an
4491 * independant muxsel for the monitor bus, I've just set it to
4492 * whatever the card is looking at.
4494 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4495 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4497 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4498 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4499 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4500 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4504 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4505 #define I2C_TDA8540 0x90
4506 #define I2C_TDA8540_ALT1 0x92
4507 #define I2C_TDA8540_ALT2 0x94
4508 #define I2C_TDA8540_ALT3 0x96
4509 #define I2C_TDA8540_ALT4 0x98
4510 #define I2C_TDA8540_ALT5 0x9a
4511 #define I2C_TDA8540_ALT6 0x9c
4513 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4516 int key = input % 4;
4517 int matrix = input / 4;
4519 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4520 btv->c.nr, input, matrix, key);
4522 /* Handles the input selection on the TDA8540's */
4523 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4524 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4525 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4526 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4527 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4528 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4529 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4530 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4532 /* Handles the output enables on the TDA8540's */
4533 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4534 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4535 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4536 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4537 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4538 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4539 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4540 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4542 /* 878's MUX0 is already selected for input via muxsel values */
4546 /* PXC200 muxsel helper
4547 * luke@syseng.anu.edu.au
4548 * another transplant
4549 * from Alessandro Rubini (rubini@linux.it)
4551 * There are 4 kinds of cards:
4552 * PXC200L which is bt848
4553 * PXC200F which is bt848 with PIC controlling mux
4554 * PXC200AL which is bt878
4555 * PXC200AF which is bt878 with PIC controlling mux
4557 #define PX_CFG_PXC200F 0x01
4558 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4559 #define PX_I2C_PIC 0x0f
4560 #define PX_PXC200A_CARDID 0x200a1295
4561 #define PX_I2C_CMD_CFG 0x00
4563 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4568 unsigned char buf[2];
4570 /* Read PIC config to determine if this is a PXC200F */
4574 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4576 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4577 /* not PXC ? do nothing */
4581 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4582 if (!(rc & PX_CFG_PXC200F)) {
4583 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4588 /* The multiplexer in the 200F is handled by the GPIO port */
4589 /* get correct mapping between inputs */
4590 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4591 /* ** not needed!? */
4594 /* make sure output pins are enabled */
4595 /* bitmask=0x30f; */
4597 /* check whether we have a PXC200A */
4598 if (btv->cardid == PX_PXC200A_CARDID) {
4599 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4600 bitmask |= 7<<4; /* the DAC */
4602 btwrite(bitmask, BT848_GPIO_OUT_EN);
4604 bitmask = btread(BT848_GPIO_DATA);
4605 if (btv->cardid == PX_PXC200A_CARDID)
4606 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4607 else /* older device */
4608 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4609 btwrite(bitmask,BT848_GPIO_DATA);
4612 * Was "to be safe, set the bt848 to input 0"
4613 * Actually, since it's ok at load time, better not messing
4614 * with these bits (on PXC200AF you need to set mux 2 here)
4616 * needed because bttv-driver sets mux before calling this function
4618 if (btv->cardid == PX_PXC200A_CARDID)
4619 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4620 else /* older device */
4621 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4623 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4626 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4628 unsigned int mux = input % 4;
4630 if (input == btv->svhs)
4633 gpio_bits(0x3, mux);
4637 * GeoVision GV-800(S) functions
4638 * Bruno Christo <bchristo@inf.ufsm.br>
4641 /* This is a function to control the analog switch, which determines which
4642 * camera is routed to which controller. The switch comprises an X-address
4643 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4644 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4645 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4646 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4647 * specified address. There is also a chip select (gpio bit 16).
4648 * The idea is to set the address and chip select together, bring
4649 * STROBE high, write the data, and finally bring STROBE back to low.
4651 static void gv800s_write(struct bttv *btv,
4652 unsigned char xaddr,
4653 unsigned char yaddr,
4654 unsigned char data) {
4655 /* On the "master" 878A:
4656 * GPIO bits 0-9 are used for the analog switch:
4657 * 00 - 03: camera selector
4658 * 04 - 06: 878A (controller) selector
4661 * 18: data (1->on, 0->off)
4664 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4665 const u32 CSELECT = 1<<16;
4666 const u32 STROBE = 1<<17;
4667 const u32 DATA = data<<18;
4669 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4670 gpio_bits(0x20000, STROBE); /* STROBE high */
4671 gpio_bits(0x40000, DATA); /* write DATA */
4672 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4676 * GeoVision GV-800(S) muxsel
4678 * Each of the 4 cards (controllers) use this function.
4679 * The controller using this function selects the input through the GPIO pins
4680 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4682 * The parameter 'input' is the requested camera number (0-4) on the controller.
4683 * The map array has the address of each input. Note that the addresses in the
4684 * array are in the sequence the original GeoVision driver uses, that is, set
4685 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4686 * the physical "camera 1" connector corresponds to controller 0 input 0,
4687 * "camera 2" corresponds to controller 1 input 0, and so on.
4689 * After getting the input address, the function then writes the appropriate
4690 * data to the analog switch, and housekeeps the local copy of the switch
4693 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4698 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4699 { 0x1, 0x5, 0xb, 0x7 },
4700 { 0x2, 0x8, 0xc, 0xe },
4701 { 0x3, 0x9, 0xd, 0xf } };
4703 mctlr = master[btv->c.nr];
4704 if (mctlr == NULL) {
4705 /* do nothing until the "master" is detected */
4708 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4709 sw_status = (char *)(&mctlr->mbox_we);
4710 xaddr = map[yaddr][input] & 0xf;
4712 /* Check if the controller/camera pair has changed, ignore otherwise */
4713 if (sw_status[yaddr] != xaddr) {
4714 /* disable the old switch, enable the new one and save status */
4715 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4716 sw_status[yaddr] = xaddr;
4717 gv800s_write(mctlr, xaddr, yaddr, 1);
4721 /* GeoVision GV-800(S) "master" chip init */
4722 static void gv800s_init(struct bttv *btv)
4724 char *sw_status = (char *)(&btv->mbox_we);
4727 gpio_inout(0xf107f, 0xf107f);
4728 gpio_write(1<<19); /* reset the analog MUX */
4731 /* Preset camera 0 to the 4 controllers */
4732 for (ix = 0; ix < 4; ix++) {
4734 gv800s_write(btv, ix, ix, 1);
4737 /* Inputs on the "master" controller need this brightness fix */
4738 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4740 if (btv->c.nr > BTTV_MAX-4)
4743 * Store the "master" controller pointer in the master
4744 * array for later use in the muxsel function.
4746 master[btv->c.nr] = btv;
4747 master[btv->c.nr+1] = btv;
4748 master[btv->c.nr+2] = btv;
4749 master[btv->c.nr+3] = btv;
4752 /* ----------------------------------------------------------------------- */
4753 /* motherboard chipset specific stuff */
4755 void __init bttv_check_chipset(void)
4757 int pcipci_fail = 0;
4758 struct pci_dev *dev = NULL;
4760 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4762 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4764 if (pci_pci_problems & PCIPCI_VSFX)
4766 #ifdef PCIPCI_ALIMAGIK
4767 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4772 /* print warnings about any quirks found */
4774 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4776 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4778 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4781 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4784 printk(KERN_INFO "bttv: overlay forced. Use this "
4785 "option at your own risk.\n");
4788 if (UNSET != latency)
4789 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4790 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4791 PCI_DEVICE_ID_INTEL_82441, dev))) {
4793 pci_read_config_byte(dev, 0x53, &b);
4795 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4796 "bufcon=0x%02x\n",b);
4800 int __devinit bttv_handle_chipset(struct bttv *btv)
4802 unsigned char command;
4804 if (!triton1 && !vsfx && UNSET == latency)
4809 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4810 if (vsfx && btv->id >= 878)
4811 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4812 if (UNSET != latency)
4813 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4817 if (btv->id < 878) {
4818 /* bt848 (mis)uses a bit in the irq mask for etbf */
4820 btv->triton1 = BT848_INT_ETBF;
4822 /* bt878 has a bit in the pci config space for it */
4823 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4825 command |= BT878_EN_TBFX;
4827 command |= BT878_EN_VSFX;
4828 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4830 if (UNSET != latency)
4831 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);