]> pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/b43/phy.h
b43: Fix for broken transmission
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / b43 / phy.h
1 #ifndef B43_PHY_H_
2 #define B43_PHY_H_
3
4 #include <linux/types.h>
5
6 struct b43_wldev;
7 struct b43_phy;
8
9 /*** PHY Registers ***/
10
11 /* Routing */
12 #define B43_PHYROUTE_OFDM_GPHY          0x400
13 #define B43_PHYROUTE_EXT_GPHY           0x800
14
15 /* Base registers. */
16 #define B43_PHY_BASE(reg)               (reg)
17 /* OFDM (A) registers of a G-PHY */
18 #define B43_PHY_OFDM(reg)               ((reg) | B43_PHYROUTE_OFDM_GPHY)
19 /* Extended G-PHY registers */
20 #define B43_PHY_EXTG(reg)               ((reg) | B43_PHYROUTE_EXT_GPHY)
21
22 /* OFDM (A) PHY Registers */
23 #define B43_PHY_VERSION_OFDM            B43_PHY_OFDM(0x00)      /* Versioning register for A-PHY */
24 #define B43_PHY_BBANDCFG                B43_PHY_OFDM(0x01)      /* Baseband config */
25 #define  B43_PHY_BBANDCFG_RXANT         0x180   /* RX Antenna selection */
26 #define  B43_PHY_BBANDCFG_RXANT_SHIFT   7
27 #define B43_PHY_PWRDOWN                 B43_PHY_OFDM(0x03)      /* Powerdown */
28 #define B43_PHY_CRSTHRES1_R1            B43_PHY_OFDM(0x06)      /* CRS Threshold 1 (phy.rev 1 only) */
29 #define B43_PHY_LNAHPFCTL               B43_PHY_OFDM(0x1C)      /* LNA/HPF control */
30 #define B43_PHY_LPFGAINCTL              B43_PHY_OFDM(0x20)      /* LPF Gain control */
31 #define B43_PHY_ADIVRELATED             B43_PHY_OFDM(0x27)      /* FIXME rename */
32 #define B43_PHY_CRS0                    B43_PHY_OFDM(0x29)
33 #define  B43_PHY_CRS0_EN                0x4000
34 #define B43_PHY_PEAK_COUNT              B43_PHY_OFDM(0x30)
35 #define B43_PHY_ANTDWELL                B43_PHY_OFDM(0x2B)      /* Antenna dwell */
36 #define  B43_PHY_ANTDWELL_AUTODIV1      0x0100  /* Automatic RX diversity start antenna */
37 #define B43_PHY_ENCORE                  B43_PHY_OFDM(0x49)      /* "Encore" (RangeMax / BroadRange) */
38 #define  B43_PHY_ENCORE_EN              0x0200  /* Encore enable */
39 #define B43_PHY_LMS                     B43_PHY_OFDM(0x55)
40 #define B43_PHY_OFDM61                  B43_PHY_OFDM(0x61)      /* FIXME rename */
41 #define  B43_PHY_OFDM61_10              0x0010  /* FIXME rename */
42 #define B43_PHY_IQBAL                   B43_PHY_OFDM(0x69)      /* I/Q balance */
43 #define B43_PHY_BBTXDC_BIAS             B43_PHY_OFDM(0x6B)      /* Baseband TX DC bias */
44 #define B43_PHY_OTABLECTL               B43_PHY_OFDM(0x72)      /* OFDM table control (see below) */
45 #define  B43_PHY_OTABLEOFF              0x03FF  /* OFDM table offset (see below) */
46 #define  B43_PHY_OTABLENR               0xFC00  /* OFDM table number (see below) */
47 #define  B43_PHY_OTABLENR_SHIFT         10
48 #define B43_PHY_OTABLEI                 B43_PHY_OFDM(0x73)      /* OFDM table data I */
49 #define B43_PHY_OTABLEQ                 B43_PHY_OFDM(0x74)      /* OFDM table data Q */
50 #define B43_PHY_HPWR_TSSICTL            B43_PHY_OFDM(0x78)      /* Hardware power TSSI control */
51 #define B43_PHY_ADCCTL                  B43_PHY_OFDM(0x7A)      /* ADC control */
52 #define B43_PHY_IDLE_TSSI               B43_PHY_OFDM(0x7B)
53 #define B43_PHY_A_TEMP_SENSE            B43_PHY_OFDM(0x7C)      /* A PHY temperature sense */
54 #define B43_PHY_NRSSITHRES              B43_PHY_OFDM(0x8A)      /* NRSSI threshold */
55 #define B43_PHY_ANTWRSETT               B43_PHY_OFDM(0x8C)      /* Antenna WR settle */
56 #define  B43_PHY_ANTWRSETT_ARXDIV       0x2000  /* Automatic RX diversity enabled */
57 #define B43_PHY_CLIPPWRDOWNT            B43_PHY_OFDM(0x93)      /* Clip powerdown threshold */
58 #define B43_PHY_OFDM9B                  B43_PHY_OFDM(0x9B)      /* FIXME rename */
59 #define B43_PHY_N1P1GAIN                B43_PHY_OFDM(0xA0)
60 #define B43_PHY_P1P2GAIN                B43_PHY_OFDM(0xA1)
61 #define B43_PHY_N1N2GAIN                B43_PHY_OFDM(0xA2)
62 #define B43_PHY_CLIPTHRES               B43_PHY_OFDM(0xA3)
63 #define B43_PHY_CLIPN1P2THRES           B43_PHY_OFDM(0xA4)
64 #define B43_PHY_CCKSHIFTBITS_WA         B43_PHY_OFDM(0xA5)      /* CCK shiftbits workaround, FIXME rename */
65 #define B43_PHY_CCKSHIFTBITS            B43_PHY_OFDM(0xA7)      /* FIXME rename */
66 #define B43_PHY_DIVSRCHIDX              B43_PHY_OFDM(0xA8)      /* Divider search gain/index */
67 #define B43_PHY_CLIPP2THRES             B43_PHY_OFDM(0xA9)
68 #define B43_PHY_CLIPP3THRES             B43_PHY_OFDM(0xAA)
69 #define B43_PHY_DIVP1P2GAIN             B43_PHY_OFDM(0xAB)
70 #define B43_PHY_DIVSRCHGAINBACK         B43_PHY_OFDM(0xAD)      /* Divider search gain back */
71 #define B43_PHY_DIVSRCHGAINCHNG         B43_PHY_OFDM(0xAE)      /* Divider search gain change */
72 #define B43_PHY_CRSTHRES1               B43_PHY_OFDM(0xC0)      /* CRS Threshold 1 (phy.rev >= 2 only) */
73 #define B43_PHY_CRSTHRES2               B43_PHY_OFDM(0xC1)      /* CRS Threshold 2 (phy.rev >= 2 only) */
74 #define B43_PHY_TSSIP_LTBASE            B43_PHY_OFDM(0x380)     /* TSSI power lookup table base */
75 #define B43_PHY_DC_LTBASE               B43_PHY_OFDM(0x3A0)     /* DC lookup table base */
76 #define B43_PHY_GAIN_LTBASE             B43_PHY_OFDM(0x3C0)     /* Gain lookup table base */
77
78 /* CCK (B) PHY Registers */
79 #define B43_PHY_VERSION_CCK             B43_PHY_BASE(0x00)      /* Versioning register for B-PHY */
80 #define B43_PHY_CCKBBANDCFG             B43_PHY_BASE(0x01)      /* Contains antenna 0/1 control bit */
81 #define B43_PHY_PGACTL                  B43_PHY_BASE(0x15)      /* PGA control */
82 #define  B43_PHY_PGACTL_LPF             0x1000  /* Low pass filter (?) */
83 #define  B43_PHY_PGACTL_LOWBANDW        0x0040  /* Low bandwidth flag */
84 #define  B43_PHY_PGACTL_UNKNOWN         0xEFA0
85 #define B43_PHY_FBCTL1                  B43_PHY_BASE(0x18)      /* Frequency bandwidth control 1 */
86 #define B43_PHY_ITSSI                   B43_PHY_BASE(0x29)      /* Idle TSSI */
87 #define B43_PHY_LO_LEAKAGE              B43_PHY_BASE(0x2D)      /* Measured LO leakage */
88 #define B43_PHY_ENERGY                  B43_PHY_BASE(0x33)      /* Energy */
89 #define B43_PHY_SYNCCTL                 B43_PHY_BASE(0x35)
90 #define B43_PHY_FBCTL2                  B43_PHY_BASE(0x38)      /* Frequency bandwidth control 2 */
91 #define B43_PHY_DACCTL                  B43_PHY_BASE(0x60)      /* DAC control */
92 #define B43_PHY_RCCALOVER               B43_PHY_BASE(0x78)      /* RC calibration override */
93
94 /* Extended G-PHY Registers */
95 #define B43_PHY_CLASSCTL                B43_PHY_EXTG(0x02)      /* Classify control */
96 #define B43_PHY_GTABCTL                 B43_PHY_EXTG(0x03)      /* G-PHY table control (see below) */
97 #define  B43_PHY_GTABOFF                0x03FF  /* G-PHY table offset (see below) */
98 #define  B43_PHY_GTABNR                 0xFC00  /* G-PHY table number (see below) */
99 #define  B43_PHY_GTABNR_SHIFT           10
100 #define B43_PHY_GTABDATA                B43_PHY_EXTG(0x04)      /* G-PHY table data */
101 #define B43_PHY_LO_MASK                 B43_PHY_EXTG(0x0F)      /* Local Oscillator control mask */
102 #define B43_PHY_LO_CTL                  B43_PHY_EXTG(0x10)      /* Local Oscillator control */
103 #define B43_PHY_RFOVER                  B43_PHY_EXTG(0x11)      /* RF override */
104 #define B43_PHY_RFOVERVAL               B43_PHY_EXTG(0x12)      /* RF override value */
105 #define  B43_PHY_RFOVERVAL_EXTLNA       0x8000
106 #define  B43_PHY_RFOVERVAL_LNA          0x7000
107 #define  B43_PHY_RFOVERVAL_LNA_SHIFT    12
108 #define  B43_PHY_RFOVERVAL_PGA          0x0F00
109 #define  B43_PHY_RFOVERVAL_PGA_SHIFT    8
110 #define  B43_PHY_RFOVERVAL_UNK          0x0010  /* Unknown, always set. */
111 #define  B43_PHY_RFOVERVAL_TRSWRX       0x00E0
112 #define  B43_PHY_RFOVERVAL_BW           0x0003  /* Bandwidth flags */
113 #define   B43_PHY_RFOVERVAL_BW_LPF      0x0001  /* Low Pass Filter */
114 #define   B43_PHY_RFOVERVAL_BW_LBW      0x0002  /* Low Bandwidth (when set), high when unset */
115 #define B43_PHY_ANALOGOVER              B43_PHY_EXTG(0x14)      /* Analog override */
116 #define B43_PHY_ANALOGOVERVAL           B43_PHY_EXTG(0x15)      /* Analog override value */
117
118 /*** OFDM table numbers ***/
119 #define B43_OFDMTAB(number, offset)     (((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
120 #define B43_OFDMTAB_AGC1                B43_OFDMTAB(0x00, 0)
121 #define B43_OFDMTAB_GAIN0               B43_OFDMTAB(0x00, 0)
122 #define B43_OFDMTAB_GAINX               B43_OFDMTAB(0x01, 0)    //TODO rename
123 #define B43_OFDMTAB_GAIN1               B43_OFDMTAB(0x01, 4)
124 #define B43_OFDMTAB_AGC3                B43_OFDMTAB(0x02, 0)
125 #define B43_OFDMTAB_GAIN2               B43_OFDMTAB(0x02, 3)
126 #define B43_OFDMTAB_LNAHPFGAIN1         B43_OFDMTAB(0x03, 0)
127 #define B43_OFDMTAB_WRSSI               B43_OFDMTAB(0x04, 0)
128 #define B43_OFDMTAB_LNAHPFGAIN2         B43_OFDMTAB(0x04, 0)
129 #define B43_OFDMTAB_NOISESCALE          B43_OFDMTAB(0x05, 0)
130 #define B43_OFDMTAB_AGC2                B43_OFDMTAB(0x06, 0)
131 #define B43_OFDMTAB_ROTOR               B43_OFDMTAB(0x08, 0)
132 #define B43_OFDMTAB_ADVRETARD           B43_OFDMTAB(0x09, 0)
133 #define B43_OFDMTAB_DAC                 B43_OFDMTAB(0x0C, 0)
134 #define B43_OFDMTAB_DC                  B43_OFDMTAB(0x0E, 7)
135 #define B43_OFDMTAB_PWRDYN2             B43_OFDMTAB(0x0E, 12)
136 #define B43_OFDMTAB_LNAGAIN             B43_OFDMTAB(0x0E, 13)
137 #define B43_OFDMTAB_UNKNOWN_0F          B43_OFDMTAB(0x0F, 0)    //TODO rename
138 #define B43_OFDMTAB_UNKNOWN_APHY        B43_OFDMTAB(0x0F, 7)    //TODO rename
139 #define B43_OFDMTAB_LPFGAIN             B43_OFDMTAB(0x0F, 12)
140 #define B43_OFDMTAB_RSSI                B43_OFDMTAB(0x10, 0)
141 #define B43_OFDMTAB_UNKNOWN_11          B43_OFDMTAB(0x11, 4)    //TODO rename
142 #define B43_OFDMTAB_AGC1_R1             B43_OFDMTAB(0x13, 0)
143 #define B43_OFDMTAB_GAINX_R1            B43_OFDMTAB(0x14, 0)    //TODO remove!
144 #define B43_OFDMTAB_MINSIGSQ            B43_OFDMTAB(0x14, 0)
145 #define B43_OFDMTAB_AGC3_R1             B43_OFDMTAB(0x15, 0)
146 #define B43_OFDMTAB_WRSSI_R1            B43_OFDMTAB(0x15, 4)
147 #define B43_OFDMTAB_TSSI                B43_OFDMTAB(0x15, 0)
148 #define B43_OFDMTAB_DACRFPABB           B43_OFDMTAB(0x16, 0)
149 #define B43_OFDMTAB_DACOFF              B43_OFDMTAB(0x17, 0)
150 #define B43_OFDMTAB_DCBIAS              B43_OFDMTAB(0x18, 0)
151
152 u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset);
153 void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
154                          u16 offset, u16 value);
155 u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
156 void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
157                          u16 offset, u32 value);
158
159 /*** G-PHY table numbers */
160 #define B43_GTAB(number, offset)        (((number) << B43_PHY_GTABNR_SHIFT) | (offset))
161 #define B43_GTAB_NRSSI                  B43_GTAB(0x00, 0)
162 #define B43_GTAB_TRFEMW                 B43_GTAB(0x0C, 0x120)
163 #define B43_GTAB_ORIGTR                 B43_GTAB(0x2E, 0x298)
164
165 u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset);        //TODO implement
166 void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value);   //TODO implement
167
168 #define B43_DEFAULT_CHANNEL_A   36
169 #define B43_DEFAULT_CHANNEL_BG  6
170
171 enum {
172         B43_ANTENNA0,           /* Antenna 0 */
173         B43_ANTENNA1,           /* Antenna 0 */
174         B43_ANTENNA_AUTO1,      /* Automatic, starting with antenna 1 */
175         B43_ANTENNA_AUTO0,      /* Automatic, starting with antenna 0 */
176
177         B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0,
178         B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO,
179 };
180
181 enum {
182         B43_INTERFMODE_NONE,
183         B43_INTERFMODE_NONWLAN,
184         B43_INTERFMODE_MANUALWLAN,
185         B43_INTERFMODE_AUTOWLAN,
186 };
187
188 /* Masks for the different PHY versioning registers. */
189 #define B43_PHYVER_ANALOG               0xF000
190 #define B43_PHYVER_ANALOG_SHIFT         12
191 #define B43_PHYVER_TYPE                 0x0F00
192 #define B43_PHYVER_TYPE_SHIFT           8
193 #define B43_PHYVER_VERSION              0x00FF
194
195 void b43_raw_phy_lock(struct b43_wldev *dev);
196 #define b43_phy_lock(dev, flags) \
197         do {                                    \
198                 local_irq_save(flags);          \
199                 b43_raw_phy_lock(dev);  \
200         } while (0)
201 void b43_raw_phy_unlock(struct b43_wldev *dev);
202 #define b43_phy_unlock(dev, flags) \
203         do {                                    \
204                 b43_raw_phy_unlock(dev);        \
205                 local_irq_restore(flags);       \
206         } while (0)
207
208 u16 b43_phy_read(struct b43_wldev *dev, u16 offset);
209 void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val);
210
211 int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev);
212
213 void b43_phy_early_init(struct b43_wldev *dev);
214 int b43_phy_init(struct b43_wldev *dev);
215
216 void b43_set_rx_antenna(struct b43_wldev *dev, int antenna);
217
218 void b43_phy_xmitpower(struct b43_wldev *dev);
219 void b43_gphy_dc_lt_init(struct b43_wldev *dev);
220
221 /* Returns the boolean whether the board has HardwarePowerControl */
222 bool b43_has_hardware_pctl(struct b43_phy *phy);
223 /* Returns the boolean whether "TX Magnification" is enabled. */
224 #define has_tx_magnification(phy) \
225         (((phy)->rev >= 2) &&                   \
226          ((phy)->radio_ver == 0x2050) &&        \
227          ((phy)->radio_rev == 8))
228 /* Card uses the loopback gain stuff */
229 #define has_loopback_gain(phy) \
230         (((phy)->rev > 1) || ((phy)->gmode))
231
232 /* Radio Attenuation (RF Attenuation) */
233 struct b43_rfatt {
234         u8 att;                 /* Attenuation value */
235         bool with_padmix;       /* Flag, PAD Mixer enabled. */
236 };
237 struct b43_rfatt_list {
238         /* Attenuation values list */
239         const struct b43_rfatt *list;
240         u8 len;
241         /* Minimum/Maximum attenuation values */
242         u8 min_val;
243         u8 max_val;
244 };
245
246 /* Baseband Attenuation */
247 struct b43_bbatt {
248         u8 att;                 /* Attenuation value */
249 };
250 struct b43_bbatt_list {
251         /* Attenuation values list */
252         const struct b43_bbatt *list;
253         u8 len;
254         /* Minimum/Maximum attenuation values */
255         u8 min_val;
256         u8 max_val;
257 };
258
259 /* tx_control bits. */
260 #define B43_TXCTL_PA3DB         0x40    /* PA Gain 3dB */
261 #define B43_TXCTL_PA2DB         0x20    /* PA Gain 2dB */
262 #define B43_TXCTL_TXMIX         0x10    /* TX Mixer Gain */
263
264 /* Write BasebandAttenuation value to the device. */
265 void b43_phy_set_baseband_attenuation(struct b43_wldev *dev,
266                                       u16 baseband_attenuation);
267
268 extern const u8 b43_radio_channel_codes_bg[];
269
270 void b43_radio_lock(struct b43_wldev *dev);
271 void b43_radio_unlock(struct b43_wldev *dev);
272
273 u16 b43_radio_read16(struct b43_wldev *dev, u16 offset);
274 void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val);
275
276 u16 b43_radio_init2050(struct b43_wldev *dev);
277 void b43_radio_init2060(struct b43_wldev *dev);
278
279 void b43_radio_turn_on(struct b43_wldev *dev);
280 void b43_radio_turn_off(struct b43_wldev *dev, bool force);
281
282 int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel,
283                             int synthetic_pu_workaround);
284
285 u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel);
286 u8 b43_radio_aci_scan(struct b43_wldev *dev);
287
288 int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode);
289
290 void b43_calc_nrssi_slope(struct b43_wldev *dev);
291 void b43_calc_nrssi_threshold(struct b43_wldev *dev);
292 s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset);
293 void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val);
294 void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val);
295 void b43_nrssi_mem_update(struct b43_wldev *dev);
296
297 void b43_radio_set_tx_iq(struct b43_wldev *dev);
298 u16 b43_radio_calibrationvalue(struct b43_wldev *dev);
299
300 void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
301                                      int *_bbatt, int *_rfatt);
302
303 void b43_set_txpower_g(struct b43_wldev *dev,
304                        const struct b43_bbatt *bbatt,
305                        const struct b43_rfatt *rfatt, u8 tx_control);
306
307 #endif /* B43_PHY_H_ */