]> pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/net/wireless/iwlwifi/iwl-core.c
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
[linux-2.6-omap-h63xx.git] / drivers / net / wireless / iwlwifi / iwl-core.c
1 /******************************************************************************
2  *
3  * GPL LICENSE SUMMARY
4  *
5  * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of version 2 of the GNU General Public License as
9  * published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
19  * USA
20  *
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *****************************************************************************/
28
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <net/mac80211.h>
32
33 #include "iwl-eeprom.h"
34 #include "iwl-dev.h" /* FIXME: remove */
35 #include "iwl-debug.h"
36 #include "iwl-core.h"
37 #include "iwl-io.h"
38 #include "iwl-rfkill.h"
39 #include "iwl-power.h"
40 #include "iwl-sta.h"
41
42
43 MODULE_DESCRIPTION("iwl core");
44 MODULE_VERSION(IWLWIFI_VERSION);
45 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
46 MODULE_LICENSE("GPL");
47
48 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
49         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
50                                     IWL_RATE_SISO_##s##M_PLCP, \
51                                     IWL_RATE_MIMO2_##s##M_PLCP,\
52                                     IWL_RATE_MIMO3_##s##M_PLCP,\
53                                     IWL_RATE_##r##M_IEEE,      \
54                                     IWL_RATE_##ip##M_INDEX,    \
55                                     IWL_RATE_##in##M_INDEX,    \
56                                     IWL_RATE_##rp##M_INDEX,    \
57                                     IWL_RATE_##rn##M_INDEX,    \
58                                     IWL_RATE_##pp##M_INDEX,    \
59                                     IWL_RATE_##np##M_INDEX }
60
61 /*
62  * Parameter order:
63  *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
64  *
65  * If there isn't a valid next or previous rate then INV is used which
66  * maps to IWL_RATE_INVALID
67  *
68  */
69 const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
70         IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */
71         IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */
72         IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
73         IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */
74         IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
75         IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */
76         IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
77         IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
78         IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
79         IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
80         IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
81         IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
82         IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
83         /* FIXME:RS:          ^^    should be INV (legacy) */
84 };
85 EXPORT_SYMBOL(iwl_rates);
86
87 /**
88  * translate ucode response to mac80211 tx status control values
89  */
90 void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
91                                   struct ieee80211_tx_info *info)
92 {
93         int rate_index;
94         struct ieee80211_tx_rate *r = &info->control.rates[0];
95
96         info->antenna_sel_tx =
97                 ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
98         if (rate_n_flags & RATE_MCS_HT_MSK)
99                 r->flags |= IEEE80211_TX_RC_MCS;
100         if (rate_n_flags & RATE_MCS_GF_MSK)
101                 r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
102         if (rate_n_flags & RATE_MCS_FAT_MSK)
103                 r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
104         if (rate_n_flags & RATE_MCS_DUP_MSK)
105                 r->flags |= IEEE80211_TX_RC_DUP_DATA;
106         if (rate_n_flags & RATE_MCS_SGI_MSK)
107                 r->flags |= IEEE80211_TX_RC_SHORT_GI;
108         rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
109         if (info->band == IEEE80211_BAND_5GHZ)
110                 rate_index -= IWL_FIRST_OFDM_RATE;
111         r->idx = rate_index;
112 }
113 EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
114
115 int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
116 {
117         int idx = 0;
118
119         /* HT rate format */
120         if (rate_n_flags & RATE_MCS_HT_MSK) {
121                 idx = (rate_n_flags & 0xff);
122
123                 if (idx >= IWL_RATE_MIMO3_6M_PLCP)
124                         idx = idx - IWL_RATE_MIMO3_6M_PLCP;
125                 else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
126                         idx = idx - IWL_RATE_MIMO2_6M_PLCP;
127
128                 idx += IWL_FIRST_OFDM_RATE;
129                 /* skip 9M not supported in ht*/
130                 if (idx >= IWL_RATE_9M_INDEX)
131                         idx += 1;
132                 if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
133                         return idx;
134
135         /* legacy rate format, search for match in table */
136         } else {
137                 for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
138                         if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
139                                 return idx;
140         }
141
142         return -1;
143 }
144 EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
145
146 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant)
147 {
148         int i;
149         u8 ind = ant;
150         for (i = 0; i < RATE_ANT_NUM - 1; i++) {
151                 ind = (ind + 1) < RATE_ANT_NUM ?  ind + 1 : 0;
152                 if (priv->hw_params.valid_tx_ant & BIT(ind))
153                         return ind;
154         }
155         return ant;
156 }
157
158 const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
159 EXPORT_SYMBOL(iwl_bcast_addr);
160
161
162 /* This function both allocates and initializes hw and priv. */
163 struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
164                 struct ieee80211_ops *hw_ops)
165 {
166         struct iwl_priv *priv;
167
168         /* mac80211 allocates memory for this device instance, including
169          *   space for this driver's private structure */
170         struct ieee80211_hw *hw =
171                 ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
172         if (hw == NULL) {
173                 printk(KERN_ERR "%s: Can not allocate network device\n",
174                        cfg->name);
175                 goto out;
176         }
177
178         priv = hw->priv;
179         priv->hw = hw;
180
181 out:
182         return hw;
183 }
184 EXPORT_SYMBOL(iwl_alloc_all);
185
186 void iwl_hw_detect(struct iwl_priv *priv)
187 {
188         priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
189         priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
190         pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
191 }
192 EXPORT_SYMBOL(iwl_hw_detect);
193
194 int iwl_hw_nic_init(struct iwl_priv *priv)
195 {
196         unsigned long flags;
197         struct iwl_rx_queue *rxq = &priv->rxq;
198         int ret;
199
200         /* nic_init */
201         spin_lock_irqsave(&priv->lock, flags);
202         priv->cfg->ops->lib->apm_ops.init(priv);
203         iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
204         spin_unlock_irqrestore(&priv->lock, flags);
205
206         ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
207
208         priv->cfg->ops->lib->apm_ops.config(priv);
209
210         /* Allocate the RX queue, or reset if it is already allocated */
211         if (!rxq->bd) {
212                 ret = iwl_rx_queue_alloc(priv);
213                 if (ret) {
214                         IWL_ERR(priv, "Unable to initialize Rx queue\n");
215                         return -ENOMEM;
216                 }
217         } else
218                 iwl_rx_queue_reset(priv, rxq);
219
220         iwl_rx_replenish(priv);
221
222         iwl_rx_init(priv, rxq);
223
224         spin_lock_irqsave(&priv->lock, flags);
225
226         rxq->need_update = 1;
227         iwl_rx_queue_update_write_ptr(priv, rxq);
228
229         spin_unlock_irqrestore(&priv->lock, flags);
230
231         /* Allocate and init all Tx and Command queues */
232         ret = iwl_txq_ctx_reset(priv);
233         if (ret)
234                 return ret;
235
236         set_bit(STATUS_INIT, &priv->status);
237
238         return 0;
239 }
240 EXPORT_SYMBOL(iwl_hw_nic_init);
241
242 void iwl_reset_qos(struct iwl_priv *priv)
243 {
244         u16 cw_min = 15;
245         u16 cw_max = 1023;
246         u8 aifs = 2;
247         bool is_legacy = false;
248         unsigned long flags;
249         int i;
250
251         spin_lock_irqsave(&priv->lock, flags);
252         /* QoS always active in AP and ADHOC mode
253          * In STA mode wait for association
254          */
255         if (priv->iw_mode == NL80211_IFTYPE_ADHOC ||
256             priv->iw_mode == NL80211_IFTYPE_AP)
257                 priv->qos_data.qos_active = 1;
258         else
259                 priv->qos_data.qos_active = 0;
260
261         /* check for legacy mode */
262         if ((priv->iw_mode == NL80211_IFTYPE_ADHOC &&
263             (priv->active_rate & IWL_OFDM_RATES_MASK) == 0) ||
264             (priv->iw_mode == NL80211_IFTYPE_STATION &&
265             (priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK) == 0)) {
266                 cw_min = 31;
267                 is_legacy = 1;
268         }
269
270         if (priv->qos_data.qos_active)
271                 aifs = 3;
272
273         priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
274         priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
275         priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
276         priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
277         priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
278
279         if (priv->qos_data.qos_active) {
280                 i = 1;
281                 priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
282                 priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
283                 priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
284                 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
285                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
286
287                 i = 2;
288                 priv->qos_data.def_qos_parm.ac[i].cw_min =
289                         cpu_to_le16((cw_min + 1) / 2 - 1);
290                 priv->qos_data.def_qos_parm.ac[i].cw_max =
291                         cpu_to_le16(cw_max);
292                 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
293                 if (is_legacy)
294                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
295                                 cpu_to_le16(6016);
296                 else
297                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
298                                 cpu_to_le16(3008);
299                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
300
301                 i = 3;
302                 priv->qos_data.def_qos_parm.ac[i].cw_min =
303                         cpu_to_le16((cw_min + 1) / 4 - 1);
304                 priv->qos_data.def_qos_parm.ac[i].cw_max =
305                         cpu_to_le16((cw_max + 1) / 2 - 1);
306                 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
307                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
308                 if (is_legacy)
309                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
310                                 cpu_to_le16(3264);
311                 else
312                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
313                                 cpu_to_le16(1504);
314         } else {
315                 for (i = 1; i < 4; i++) {
316                         priv->qos_data.def_qos_parm.ac[i].cw_min =
317                                 cpu_to_le16(cw_min);
318                         priv->qos_data.def_qos_parm.ac[i].cw_max =
319                                 cpu_to_le16(cw_max);
320                         priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
321                         priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
322                         priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
323                 }
324         }
325         IWL_DEBUG_QOS("set QoS to default \n");
326
327         spin_unlock_irqrestore(&priv->lock, flags);
328 }
329 EXPORT_SYMBOL(iwl_reset_qos);
330
331 #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
332 #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
333 static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
334                               struct ieee80211_sta_ht_cap *ht_info,
335                               enum ieee80211_band band)
336 {
337         u16 max_bit_rate = 0;
338         u8 rx_chains_num = priv->hw_params.rx_chains_num;
339         u8 tx_chains_num = priv->hw_params.tx_chains_num;
340
341         ht_info->cap = 0;
342         memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
343
344         ht_info->ht_supported = true;
345
346         ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
347         ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
348         ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
349                              (WLAN_HT_CAP_SM_PS_DISABLED << 2));
350
351         max_bit_rate = MAX_BIT_RATE_20_MHZ;
352         if (priv->hw_params.fat_channel & BIT(band)) {
353                 ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
354                 ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
355                 ht_info->mcs.rx_mask[4] = 0x01;
356                 max_bit_rate = MAX_BIT_RATE_40_MHZ;
357         }
358
359         if (priv->cfg->mod_params->amsdu_size_8K)
360                 ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
361
362         ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
363         ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
364
365         ht_info->mcs.rx_mask[0] = 0xFF;
366         if (rx_chains_num >= 2)
367                 ht_info->mcs.rx_mask[1] = 0xFF;
368         if (rx_chains_num >= 3)
369                 ht_info->mcs.rx_mask[2] = 0xFF;
370
371         /* Highest supported Rx data rate */
372         max_bit_rate *= rx_chains_num;
373         WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
374         ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
375
376         /* Tx MCS capabilities */
377         ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
378         if (tx_chains_num != rx_chains_num) {
379                 ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
380                 ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
381                                 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
382         }
383 }
384
385 static void iwlcore_init_hw_rates(struct iwl_priv *priv,
386                               struct ieee80211_rate *rates)
387 {
388         int i;
389
390         for (i = 0; i < IWL_RATE_COUNT; i++) {
391                 rates[i].bitrate = iwl_rates[i].ieee * 5;
392                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
393                 rates[i].hw_value_short = i;
394                 rates[i].flags = 0;
395                 if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
396                         /*
397                          * If CCK != 1M then set short preamble rate flag.
398                          */
399                         rates[i].flags |=
400                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
401                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
402                 }
403         }
404 }
405
406 /**
407  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
408  */
409 int iwlcore_init_geos(struct iwl_priv *priv)
410 {
411         struct iwl_channel_info *ch;
412         struct ieee80211_supported_band *sband;
413         struct ieee80211_channel *channels;
414         struct ieee80211_channel *geo_ch;
415         struct ieee80211_rate *rates;
416         int i = 0;
417
418         if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
419             priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
420                 IWL_DEBUG_INFO("Geography modes already initialized.\n");
421                 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
422                 return 0;
423         }
424
425         channels = kzalloc(sizeof(struct ieee80211_channel) *
426                            priv->channel_count, GFP_KERNEL);
427         if (!channels)
428                 return -ENOMEM;
429
430         rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
431                         GFP_KERNEL);
432         if (!rates) {
433                 kfree(channels);
434                 return -ENOMEM;
435         }
436
437         /* 5.2GHz channels start after the 2.4GHz channels */
438         sband = &priv->bands[IEEE80211_BAND_5GHZ];
439         sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
440         /* just OFDM */
441         sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
442         sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
443
444         if (priv->cfg->sku & IWL_SKU_N)
445                 iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
446                                          IEEE80211_BAND_5GHZ);
447
448         sband = &priv->bands[IEEE80211_BAND_2GHZ];
449         sband->channels = channels;
450         /* OFDM & CCK */
451         sband->bitrates = rates;
452         sband->n_bitrates = IWL_RATE_COUNT;
453
454         if (priv->cfg->sku & IWL_SKU_N)
455                 iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
456                                          IEEE80211_BAND_2GHZ);
457
458         priv->ieee_channels = channels;
459         priv->ieee_rates = rates;
460
461         for (i = 0;  i < priv->channel_count; i++) {
462                 ch = &priv->channel_info[i];
463
464                 /* FIXME: might be removed if scan is OK */
465                 if (!is_channel_valid(ch))
466                         continue;
467
468                 if (is_channel_a_band(ch))
469                         sband =  &priv->bands[IEEE80211_BAND_5GHZ];
470                 else
471                         sband =  &priv->bands[IEEE80211_BAND_2GHZ];
472
473                 geo_ch = &sband->channels[sband->n_channels++];
474
475                 geo_ch->center_freq =
476                                 ieee80211_channel_to_frequency(ch->channel);
477                 geo_ch->max_power = ch->max_power_avg;
478                 geo_ch->max_antenna_gain = 0xff;
479                 geo_ch->hw_value = ch->channel;
480
481                 if (is_channel_valid(ch)) {
482                         if (!(ch->flags & EEPROM_CHANNEL_IBSS))
483                                 geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
484
485                         if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
486                                 geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
487
488                         if (ch->flags & EEPROM_CHANNEL_RADAR)
489                                 geo_ch->flags |= IEEE80211_CHAN_RADAR;
490
491                         geo_ch->flags |= ch->fat_extension_channel;
492
493                         if (ch->max_power_avg > priv->tx_power_channel_lmt)
494                                 priv->tx_power_channel_lmt = ch->max_power_avg;
495                 } else {
496                         geo_ch->flags |= IEEE80211_CHAN_DISABLED;
497                 }
498
499                 /* Save flags for reg domain usage */
500                 geo_ch->orig_flags = geo_ch->flags;
501
502                 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
503                                 ch->channel, geo_ch->center_freq,
504                                 is_channel_a_band(ch) ?  "5.2" : "2.4",
505                                 geo_ch->flags & IEEE80211_CHAN_DISABLED ?
506                                 "restricted" : "valid",
507                                  geo_ch->flags);
508         }
509
510         if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
511              priv->cfg->sku & IWL_SKU_A) {
512                 IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
513                         "Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
514                            priv->pci_dev->device,
515                            priv->pci_dev->subsystem_device);
516                 priv->cfg->sku &= ~IWL_SKU_A;
517         }
518
519         IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
520                    priv->bands[IEEE80211_BAND_2GHZ].n_channels,
521                    priv->bands[IEEE80211_BAND_5GHZ].n_channels);
522
523         set_bit(STATUS_GEO_CONFIGURED, &priv->status);
524
525         return 0;
526 }
527 EXPORT_SYMBOL(iwlcore_init_geos);
528
529 /*
530  * iwlcore_free_geos - undo allocations in iwlcore_init_geos
531  */
532 void iwlcore_free_geos(struct iwl_priv *priv)
533 {
534         kfree(priv->ieee_channels);
535         kfree(priv->ieee_rates);
536         clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
537 }
538 EXPORT_SYMBOL(iwlcore_free_geos);
539
540 static bool is_single_rx_stream(struct iwl_priv *priv)
541 {
542         return !priv->current_ht_config.is_ht ||
543                ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
544                 (priv->current_ht_config.mcs.rx_mask[2] == 0));
545 }
546
547 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
548                                    enum ieee80211_band band,
549                                    u16 channel, u8 extension_chan_offset)
550 {
551         const struct iwl_channel_info *ch_info;
552
553         ch_info = iwl_get_channel_info(priv, band, channel);
554         if (!is_channel_valid(ch_info))
555                 return 0;
556
557         if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
558                 return !(ch_info->fat_extension_channel &
559                                         IEEE80211_CHAN_NO_FAT_ABOVE);
560         else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
561                 return !(ch_info->fat_extension_channel &
562                                         IEEE80211_CHAN_NO_FAT_BELOW);
563
564         return 0;
565 }
566
567 u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
568                          struct ieee80211_sta_ht_cap *sta_ht_inf)
569 {
570         struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
571
572         if ((!iwl_ht_conf->is_ht) ||
573            (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
574            (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE))
575                 return 0;
576
577         if (sta_ht_inf) {
578                 if ((!sta_ht_inf->ht_supported) ||
579                    (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)))
580                         return 0;
581         }
582
583         return iwl_is_channel_extension(priv, priv->band,
584                                         le16_to_cpu(priv->staging_rxon.channel),
585                                         iwl_ht_conf->extension_chan_offset);
586 }
587 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
588
589 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
590 {
591         struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
592         u32 val;
593
594         if (!ht_info->is_ht) {
595                 rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
596                         RXON_FLG_CHANNEL_MODE_PURE_40_MSK |
597                         RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
598                         RXON_FLG_FAT_PROT_MSK |
599                         RXON_FLG_HT_PROT_MSK);
600                 return;
601         }
602
603         /* Set up channel bandwidth:  20 MHz only, or 20/40 mixed if fat ok */
604         if (iwl_is_fat_tx_allowed(priv, NULL))
605                 rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
606         else
607                 rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
608                                  RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
609
610         /* Note: control channel is opposite of extension channel */
611         switch (ht_info->extension_chan_offset) {
612         case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
613                 rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
614                 break;
615         case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
616                 rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
617                 break;
618         case IEEE80211_HT_PARAM_CHA_SEC_NONE:
619         default:
620                 rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
621                 break;
622         }
623
624         val = ht_info->ht_protection;
625
626         rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
627
628         iwl_set_rxon_chain(priv);
629
630         IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
631                         "rxon flags 0x%X operation mode :0x%X "
632                         "extension channel offset 0x%x\n",
633                         ht_info->mcs.rx_mask[0],
634                         ht_info->mcs.rx_mask[1],
635                         ht_info->mcs.rx_mask[2],
636                         le32_to_cpu(rxon->flags), ht_info->ht_protection,
637                         ht_info->extension_chan_offset);
638         return;
639 }
640 EXPORT_SYMBOL(iwl_set_rxon_ht);
641
642 #define IWL_NUM_RX_CHAINS_MULTIPLE      3
643 #define IWL_NUM_RX_CHAINS_SINGLE        2
644 #define IWL_NUM_IDLE_CHAINS_DUAL        2
645 #define IWL_NUM_IDLE_CHAINS_SINGLE      1
646
647 /* Determine how many receiver/antenna chains to use.
648  * More provides better reception via diversity.  Fewer saves power.
649  * MIMO (dual stream) requires at least 2, but works better with 3.
650  * This does not determine *which* chains to use, just how many.
651  */
652 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
653 {
654         bool is_single = is_single_rx_stream(priv);
655         bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
656
657         /* # of Rx chains to use when expecting MIMO. */
658         if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
659                                                  WLAN_HT_CAP_SM_PS_STATIC)))
660                 return IWL_NUM_RX_CHAINS_SINGLE;
661         else
662                 return IWL_NUM_RX_CHAINS_MULTIPLE;
663 }
664
665 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
666 {
667         int idle_cnt;
668         bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
669         /* # Rx chains when idling and maybe trying to save power */
670         switch (priv->current_ht_config.sm_ps) {
671         case WLAN_HT_CAP_SM_PS_STATIC:
672         case WLAN_HT_CAP_SM_PS_DYNAMIC:
673                 idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
674                                         IWL_NUM_IDLE_CHAINS_SINGLE;
675                 break;
676         case WLAN_HT_CAP_SM_PS_DISABLED:
677                 idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
678                 break;
679         case WLAN_HT_CAP_SM_PS_INVALID:
680         default:
681                 IWL_ERR(priv, "invalid mimo ps mode %d\n",
682                            priv->current_ht_config.sm_ps);
683                 WARN_ON(1);
684                 idle_cnt = -1;
685                 break;
686         }
687         return idle_cnt;
688 }
689
690 /* up to 4 chains */
691 static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
692 {
693         u8 res;
694         res = (chain_bitmap & BIT(0)) >> 0;
695         res += (chain_bitmap & BIT(1)) >> 1;
696         res += (chain_bitmap & BIT(2)) >> 2;
697         res += (chain_bitmap & BIT(4)) >> 4;
698         return res;
699 }
700
701 /**
702  * iwl_is_monitor_mode - Determine if interface in monitor mode
703  *
704  * priv->iw_mode is set in add_interface, but add_interface is
705  * never called for monitor mode. The only way mac80211 informs us about
706  * monitor mode is through configuring filters (call to configure_filter).
707  */
708 static bool iwl_is_monitor_mode(struct iwl_priv *priv)
709 {
710         return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
711 }
712
713 /**
714  * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
715  *
716  * Selects how many and which Rx receivers/antennas/chains to use.
717  * This should not be used for scan command ... it puts data in wrong place.
718  */
719 void iwl_set_rxon_chain(struct iwl_priv *priv)
720 {
721         bool is_single = is_single_rx_stream(priv);
722         bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
723         u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
724         u32 active_chains;
725         u16 rx_chain;
726
727         /* Tell uCode which antennas are actually connected.
728          * Before first association, we assume all antennas are connected.
729          * Just after first association, iwl_chain_noise_calibration()
730          *    checks which antennas actually *are* connected. */
731          if (priv->chain_noise_data.active_chains)
732                 active_chains = priv->chain_noise_data.active_chains;
733         else
734                 active_chains = priv->hw_params.valid_rx_ant;
735
736         rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
737
738         /* How many receivers should we use? */
739         active_rx_cnt = iwl_get_active_rx_chain_count(priv);
740         idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
741
742
743         /* correct rx chain count according hw settings
744          * and chain noise calibration
745          */
746         valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
747         if (valid_rx_cnt < active_rx_cnt)
748                 active_rx_cnt = valid_rx_cnt;
749
750         if (valid_rx_cnt < idle_rx_cnt)
751                 idle_rx_cnt = valid_rx_cnt;
752
753         rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
754         rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
755
756         /* copied from 'iwl_bg_request_scan()' */
757         /* Force use of chains B and C (0x6) for Rx for 4965
758          * Avoid A (0x1) because of its off-channel reception on A-band.
759          * MIMO is not used here, but value is required */
760         if (iwl_is_monitor_mode(priv) &&
761             !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) &&
762             ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) {
763                 rx_chain = 0x07 << RXON_RX_CHAIN_VALID_POS;
764                 rx_chain |= 0x06 << RXON_RX_CHAIN_FORCE_SEL_POS;
765                 rx_chain |= 0x07 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
766                 rx_chain |= 0x01 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
767         }
768
769         priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
770
771         if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
772                 priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
773         else
774                 priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
775
776         IWL_DEBUG_ASSOC("rx_chain=0x%X active=%d idle=%d\n",
777                         priv->staging_rxon.rx_chain,
778                         active_rx_cnt, idle_rx_cnt);
779
780         WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
781                 active_rx_cnt < idle_rx_cnt);
782 }
783 EXPORT_SYMBOL(iwl_set_rxon_chain);
784
785 /**
786  * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
787  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
788  * @channel: Any channel valid for the requested phymode
789
790  * In addition to setting the staging RXON, priv->phymode is also set.
791  *
792  * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
793  * in the staging RXON flag structure based on the phymode
794  */
795 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
796 {
797         enum ieee80211_band band = ch->band;
798         u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
799
800         if (!iwl_get_channel_info(priv, band, channel)) {
801                 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
802                                channel, band);
803                 return -EINVAL;
804         }
805
806         if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
807             (priv->band == band))
808                 return 0;
809
810         priv->staging_rxon.channel = cpu_to_le16(channel);
811         if (band == IEEE80211_BAND_5GHZ)
812                 priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
813         else
814                 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
815
816         priv->band = band;
817
818         IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
819
820         return 0;
821 }
822 EXPORT_SYMBOL(iwl_set_rxon_channel);
823
824 int iwl_setup_mac(struct iwl_priv *priv)
825 {
826         int ret;
827         struct ieee80211_hw *hw = priv->hw;
828         hw->rate_control_algorithm = "iwl-agn-rs";
829
830         /* Tell mac80211 our characteristics */
831         hw->flags = IEEE80211_HW_SIGNAL_DBM |
832                     IEEE80211_HW_NOISE_DBM |
833                     IEEE80211_HW_AMPDU_AGGREGATION |
834                     IEEE80211_HW_SUPPORTS_PS;
835         hw->wiphy->interface_modes =
836                 BIT(NL80211_IFTYPE_STATION) |
837                 BIT(NL80211_IFTYPE_ADHOC);
838
839         hw->wiphy->custom_regulatory = true;
840
841         /* Default value; 4 EDCA QOS priorities */
842         hw->queues = 4;
843         /* queues to support 11n aggregation */
844         if (priv->cfg->sku & IWL_SKU_N)
845                 hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
846
847         hw->conf.beacon_int = 100;
848         hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
849
850         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
851                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
852                         &priv->bands[IEEE80211_BAND_2GHZ];
853         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
854                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
855                         &priv->bands[IEEE80211_BAND_5GHZ];
856
857         ret = ieee80211_register_hw(priv->hw);
858         if (ret) {
859                 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
860                 return ret;
861         }
862         priv->mac80211_registered = 1;
863
864         return 0;
865 }
866 EXPORT_SYMBOL(iwl_setup_mac);
867
868 int iwl_set_hw_params(struct iwl_priv *priv)
869 {
870         priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
871         priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
872         priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
873         if (priv->cfg->mod_params->amsdu_size_8K)
874                 priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
875         else
876                 priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
877         priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
878
879         if (priv->cfg->mod_params->disable_11n)
880                 priv->cfg->sku &= ~IWL_SKU_N;
881
882         /* Device-specific setup */
883         return priv->cfg->ops->lib->set_hw_params(priv);
884 }
885 EXPORT_SYMBOL(iwl_set_hw_params);
886
887 int iwl_init_drv(struct iwl_priv *priv)
888 {
889         int ret;
890
891         priv->ibss_beacon = NULL;
892
893         spin_lock_init(&priv->lock);
894         spin_lock_init(&priv->power_data.lock);
895         spin_lock_init(&priv->sta_lock);
896         spin_lock_init(&priv->hcmd_lock);
897
898         INIT_LIST_HEAD(&priv->free_frames);
899
900         mutex_init(&priv->mutex);
901
902         /* Clear the driver's (not device's) station table */
903         iwl_clear_stations_table(priv);
904
905         priv->data_retry_limit = -1;
906         priv->ieee_channels = NULL;
907         priv->ieee_rates = NULL;
908         priv->band = IEEE80211_BAND_2GHZ;
909
910         priv->iw_mode = NL80211_IFTYPE_STATION;
911
912         priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
913
914         /* Choose which receivers/antennas to use */
915         iwl_set_rxon_chain(priv);
916         iwl_init_scan_params(priv);
917
918         iwl_reset_qos(priv);
919
920         priv->qos_data.qos_active = 0;
921         priv->qos_data.qos_cap.val = 0;
922
923         priv->rates_mask = IWL_RATES_MASK;
924         /* If power management is turned on, default to AC mode */
925         priv->power_mode = IWL_POWER_AC;
926         priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
927
928         ret = iwl_init_channel_map(priv);
929         if (ret) {
930                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
931                 goto err;
932         }
933
934         ret = iwlcore_init_geos(priv);
935         if (ret) {
936                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
937                 goto err_free_channel_map;
938         }
939         iwlcore_init_hw_rates(priv, priv->ieee_rates);
940
941         return 0;
942
943 err_free_channel_map:
944         iwl_free_channel_map(priv);
945 err:
946         return ret;
947 }
948 EXPORT_SYMBOL(iwl_init_drv);
949
950 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
951 {
952         int ret = 0;
953         if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
954                 IWL_WARN(priv, "Requested user TXPOWER %d below limit.\n",
955                             priv->tx_power_user_lmt);
956                 return -EINVAL;
957         }
958
959         if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
960                 IWL_WARN(priv, "Requested user TXPOWER %d above limit.\n",
961                             priv->tx_power_user_lmt);
962                 return -EINVAL;
963         }
964
965         if (priv->tx_power_user_lmt != tx_power)
966                 force = true;
967
968         priv->tx_power_user_lmt = tx_power;
969
970         if (force && priv->cfg->ops->lib->send_tx_power)
971                 ret = priv->cfg->ops->lib->send_tx_power(priv);
972
973         return ret;
974 }
975 EXPORT_SYMBOL(iwl_set_tx_power);
976
977 void iwl_uninit_drv(struct iwl_priv *priv)
978 {
979         iwl_calib_free_results(priv);
980         iwlcore_free_geos(priv);
981         iwl_free_channel_map(priv);
982         kfree(priv->scan);
983 }
984 EXPORT_SYMBOL(iwl_uninit_drv);
985
986
987 void iwl_disable_interrupts(struct iwl_priv *priv)
988 {
989         clear_bit(STATUS_INT_ENABLED, &priv->status);
990
991         /* disable interrupts from uCode/NIC to host */
992         iwl_write32(priv, CSR_INT_MASK, 0x00000000);
993
994         /* acknowledge/clear/reset any interrupts still pending
995          * from uCode or flow handler (Rx/Tx DMA) */
996         iwl_write32(priv, CSR_INT, 0xffffffff);
997         iwl_write32(priv, CSR_FH_INT_STATUS, 0xffffffff);
998         IWL_DEBUG_ISR("Disabled interrupts\n");
999 }
1000 EXPORT_SYMBOL(iwl_disable_interrupts);
1001
1002 void iwl_enable_interrupts(struct iwl_priv *priv)
1003 {
1004         IWL_DEBUG_ISR("Enabling interrupts\n");
1005         set_bit(STATUS_INT_ENABLED, &priv->status);
1006         iwl_write32(priv, CSR_INT_MASK, CSR_INI_SET_MASK);
1007 }
1008 EXPORT_SYMBOL(iwl_enable_interrupts);
1009
1010 int iwl_send_bt_config(struct iwl_priv *priv)
1011 {
1012         struct iwl_bt_cmd bt_cmd = {
1013                 .flags = 3,
1014                 .lead_time = 0xAA,
1015                 .max_kill = 1,
1016                 .kill_ack_mask = 0,
1017                 .kill_cts_mask = 0,
1018         };
1019
1020         return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
1021                                 sizeof(struct iwl_bt_cmd), &bt_cmd);
1022 }
1023 EXPORT_SYMBOL(iwl_send_bt_config);
1024
1025 int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
1026 {
1027         u32 stat_flags = 0;
1028         struct iwl_host_cmd cmd = {
1029                 .id = REPLY_STATISTICS_CMD,
1030                 .meta.flags = flags,
1031                 .len = sizeof(stat_flags),
1032                 .data = (u8 *) &stat_flags,
1033         };
1034         return iwl_send_cmd(priv, &cmd);
1035 }
1036 EXPORT_SYMBOL(iwl_send_statistics_request);
1037
1038 /**
1039  * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
1040  *   using sample data 100 bytes apart.  If these sample points are good,
1041  *   it's a pretty good bet that everything between them is good, too.
1042  */
1043 static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
1044 {
1045         u32 val;
1046         int ret = 0;
1047         u32 errcnt = 0;
1048         u32 i;
1049
1050         IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
1051
1052         ret = iwl_grab_nic_access(priv);
1053         if (ret)
1054                 return ret;
1055
1056         for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
1057                 /* read data comes through single port, auto-incr addr */
1058                 /* NOTE: Use the debugless read so we don't flood kernel log
1059                  * if IWL_DL_IO is set */
1060                 iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
1061                         i + IWL49_RTC_INST_LOWER_BOUND);
1062                 val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1063                 if (val != le32_to_cpu(*image)) {
1064                         ret = -EIO;
1065                         errcnt++;
1066                         if (errcnt >= 3)
1067                                 break;
1068                 }
1069         }
1070
1071         iwl_release_nic_access(priv);
1072
1073         return ret;
1074 }
1075
1076 /**
1077  * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
1078  *     looking at all data.
1079  */
1080 static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
1081                                  u32 len)
1082 {
1083         u32 val;
1084         u32 save_len = len;
1085         int ret = 0;
1086         u32 errcnt;
1087
1088         IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
1089
1090         ret = iwl_grab_nic_access(priv);
1091         if (ret)
1092                 return ret;
1093
1094         iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
1095                            IWL49_RTC_INST_LOWER_BOUND);
1096
1097         errcnt = 0;
1098         for (; len > 0; len -= sizeof(u32), image++) {
1099                 /* read data comes through single port, auto-incr addr */
1100                 /* NOTE: Use the debugless read so we don't flood kernel log
1101                  * if IWL_DL_IO is set */
1102                 val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1103                 if (val != le32_to_cpu(*image)) {
1104                         IWL_ERR(priv, "uCode INST section is invalid at "
1105                                   "offset 0x%x, is 0x%x, s/b 0x%x\n",
1106                                   save_len - len, val, le32_to_cpu(*image));
1107                         ret = -EIO;
1108                         errcnt++;
1109                         if (errcnt >= 20)
1110                                 break;
1111                 }
1112         }
1113
1114         iwl_release_nic_access(priv);
1115
1116         if (!errcnt)
1117                 IWL_DEBUG_INFO
1118                     ("ucode image in INSTRUCTION memory is good\n");
1119
1120         return ret;
1121 }
1122
1123 /**
1124  * iwl_verify_ucode - determine which instruction image is in SRAM,
1125  *    and verify its contents
1126  */
1127 int iwl_verify_ucode(struct iwl_priv *priv)
1128 {
1129         __le32 *image;
1130         u32 len;
1131         int ret;
1132
1133         /* Try bootstrap */
1134         image = (__le32 *)priv->ucode_boot.v_addr;
1135         len = priv->ucode_boot.len;
1136         ret = iwlcore_verify_inst_sparse(priv, image, len);
1137         if (!ret) {
1138                 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
1139                 return 0;
1140         }
1141
1142         /* Try initialize */
1143         image = (__le32 *)priv->ucode_init.v_addr;
1144         len = priv->ucode_init.len;
1145         ret = iwlcore_verify_inst_sparse(priv, image, len);
1146         if (!ret) {
1147                 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
1148                 return 0;
1149         }
1150
1151         /* Try runtime/protocol */
1152         image = (__le32 *)priv->ucode_code.v_addr;
1153         len = priv->ucode_code.len;
1154         ret = iwlcore_verify_inst_sparse(priv, image, len);
1155         if (!ret) {
1156                 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
1157                 return 0;
1158         }
1159
1160         IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1161
1162         /* Since nothing seems to match, show first several data entries in
1163          * instruction SRAM, so maybe visual inspection will give a clue.
1164          * Selection of bootstrap image (vs. other images) is arbitrary. */
1165         image = (__le32 *)priv->ucode_boot.v_addr;
1166         len = priv->ucode_boot.len;
1167         ret = iwl_verify_inst_full(priv, image, len);
1168
1169         return ret;
1170 }
1171 EXPORT_SYMBOL(iwl_verify_ucode);
1172
1173
1174 static const char *desc_lookup_text[] = {
1175         "OK",
1176         "FAIL",
1177         "BAD_PARAM",
1178         "BAD_CHECKSUM",
1179         "NMI_INTERRUPT_WDG",
1180         "SYSASSERT",
1181         "FATAL_ERROR",
1182         "BAD_COMMAND",
1183         "HW_ERROR_TUNE_LOCK",
1184         "HW_ERROR_TEMPERATURE",
1185         "ILLEGAL_CHAN_FREQ",
1186         "VCC_NOT_STABLE",
1187         "FH_ERROR",
1188         "NMI_INTERRUPT_HOST",
1189         "NMI_INTERRUPT_ACTION_PT",
1190         "NMI_INTERRUPT_UNKNOWN",
1191         "UCODE_VERSION_MISMATCH",
1192         "HW_ERROR_ABS_LOCK",
1193         "HW_ERROR_CAL_LOCK_FAIL",
1194         "NMI_INTERRUPT_INST_ACTION_PT",
1195         "NMI_INTERRUPT_DATA_ACTION_PT",
1196         "NMI_TRM_HW_ER",
1197         "NMI_INTERRUPT_TRM",
1198         "NMI_INTERRUPT_BREAK_POINT"
1199         "DEBUG_0",
1200         "DEBUG_1",
1201         "DEBUG_2",
1202         "DEBUG_3",
1203         "UNKNOWN"
1204 };
1205
1206 static const char *desc_lookup(int i)
1207 {
1208         int max = ARRAY_SIZE(desc_lookup_text) - 1;
1209
1210         if (i < 0 || i > max)
1211                 i = max;
1212
1213         return desc_lookup_text[i];
1214 }
1215
1216 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1217 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1218
1219 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1220 {
1221         u32 data2, line;
1222         u32 desc, time, count, base, data1;
1223         u32 blink1, blink2, ilink1, ilink2;
1224         int ret;
1225
1226         if (priv->ucode_type == UCODE_INIT)
1227                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1228         else
1229                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1230
1231         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1232                 IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
1233                 return;
1234         }
1235
1236         ret = iwl_grab_nic_access(priv);
1237         if (ret) {
1238                 IWL_WARN(priv, "Can not read from adapter at this time.\n");
1239                 return;
1240         }
1241
1242         count = iwl_read_targ_mem(priv, base);
1243
1244         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1245                 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1246                 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1247                         priv->status, count);
1248         }
1249
1250         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1251         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1252         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1253         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1254         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1255         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1256         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1257         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1258         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1259
1260         IWL_ERR(priv, "Desc                               Time       "
1261                 "data1      data2      line\n");
1262         IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1263                 desc_lookup(desc), desc, time, data1, data2, line);
1264         IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n");
1265         IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
1266                 ilink1, ilink2);
1267
1268         iwl_release_nic_access(priv);
1269 }
1270 EXPORT_SYMBOL(iwl_dump_nic_error_log);
1271
1272 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1273
1274 /**
1275  * iwl_print_event_log - Dump error event log to syslog
1276  *
1277  * NOTE: Must be called with iwl_grab_nic_access() already obtained!
1278  */
1279 static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1280                                 u32 num_events, u32 mode)
1281 {
1282         u32 i;
1283         u32 base;       /* SRAM byte address of event log header */
1284         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1285         u32 ptr;        /* SRAM byte address of log data */
1286         u32 ev, time, data; /* event log data */
1287
1288         if (num_events == 0)
1289                 return;
1290         if (priv->ucode_type == UCODE_INIT)
1291                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1292         else
1293                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1294
1295         if (mode == 0)
1296                 event_size = 2 * sizeof(u32);
1297         else
1298                 event_size = 3 * sizeof(u32);
1299
1300         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1301
1302         /* "time" is actually "data" for mode 0 (no timestamp).
1303         * place event id # at far right for easier visual parsing. */
1304         for (i = 0; i < num_events; i++) {
1305                 ev = iwl_read_targ_mem(priv, ptr);
1306                 ptr += sizeof(u32);
1307                 time = iwl_read_targ_mem(priv, ptr);
1308                 ptr += sizeof(u32);
1309                 if (mode == 0) {
1310                         /* data, ev */
1311                         IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
1312                 } else {
1313                         data = iwl_read_targ_mem(priv, ptr);
1314                         ptr += sizeof(u32);
1315                         IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1316                                         time, data, ev);
1317                 }
1318         }
1319 }
1320
1321 void iwl_dump_nic_event_log(struct iwl_priv *priv)
1322 {
1323         int ret;
1324         u32 base;       /* SRAM byte address of event log header */
1325         u32 capacity;   /* event log capacity in # entries */
1326         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
1327         u32 num_wraps;  /* # times uCode wrapped to top of log */
1328         u32 next_entry; /* index of next entry to be written by uCode */
1329         u32 size;       /* # entries that we'll print */
1330
1331         if (priv->ucode_type == UCODE_INIT)
1332                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1333         else
1334                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1335
1336         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1337                 IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
1338                 return;
1339         }
1340
1341         ret = iwl_grab_nic_access(priv);
1342         if (ret) {
1343                 IWL_WARN(priv, "Can not read from adapter at this time.\n");
1344                 return;
1345         }
1346
1347         /* event log header */
1348         capacity = iwl_read_targ_mem(priv, base);
1349         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1350         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1351         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1352
1353         size = num_wraps ? capacity : next_entry;
1354
1355         /* bail out if nothing in log */
1356         if (size == 0) {
1357                 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
1358                 iwl_release_nic_access(priv);
1359                 return;
1360         }
1361
1362         IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
1363                         size, num_wraps);
1364
1365         /* if uCode has wrapped back to top of log, start at the oldest entry,
1366          * i.e the next one that uCode would fill. */
1367         if (num_wraps)
1368                 iwl_print_event_log(priv, next_entry,
1369                                         capacity - next_entry, mode);
1370         /* (then/else) start at top of log */
1371         iwl_print_event_log(priv, 0, next_entry, mode);
1372
1373         iwl_release_nic_access(priv);
1374 }
1375 EXPORT_SYMBOL(iwl_dump_nic_event_log);
1376
1377 void iwl_rf_kill_ct_config(struct iwl_priv *priv)
1378 {
1379         struct iwl_ct_kill_config cmd;
1380         unsigned long flags;
1381         int ret = 0;
1382
1383         spin_lock_irqsave(&priv->lock, flags);
1384         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
1385                     CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
1386         spin_unlock_irqrestore(&priv->lock, flags);
1387
1388         cmd.critical_temperature_R =
1389                 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1390
1391         ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
1392                                sizeof(cmd), &cmd);
1393         if (ret)
1394                 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1395         else
1396                 IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
1397                         "critical temperature is %d\n",
1398                         cmd.critical_temperature_R);
1399 }
1400 EXPORT_SYMBOL(iwl_rf_kill_ct_config);
1401
1402
1403 /*
1404  * CARD_STATE_CMD
1405  *
1406  * Use: Sets the device's internal card state to enable, disable, or halt
1407  *
1408  * When in the 'enable' state the card operates as normal.
1409  * When in the 'disable' state, the card enters into a low power mode.
1410  * When in the 'halt' state, the card is shut down and must be fully
1411  * restarted to come back on.
1412  */
1413 int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
1414 {
1415         struct iwl_host_cmd cmd = {
1416                 .id = REPLY_CARD_STATE_CMD,
1417                 .len = sizeof(u32),
1418                 .data = &flags,
1419                 .meta.flags = meta_flag,
1420         };
1421
1422         return iwl_send_cmd(priv, &cmd);
1423 }
1424 EXPORT_SYMBOL(iwl_send_card_state);
1425
1426 void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
1427 {
1428         unsigned long flags;
1429
1430         if (test_bit(STATUS_RF_KILL_SW, &priv->status))
1431                 return;
1432
1433         IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
1434
1435         iwl_scan_cancel(priv);
1436         /* FIXME: This is a workaround for AP */
1437         if (priv->iw_mode != NL80211_IFTYPE_AP) {
1438                 spin_lock_irqsave(&priv->lock, flags);
1439                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
1440                             CSR_UCODE_SW_BIT_RFKILL);
1441                 spin_unlock_irqrestore(&priv->lock, flags);
1442                 /* call the host command only if no hw rf-kill set */
1443                 if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
1444                     iwl_is_ready(priv))
1445                         iwl_send_card_state(priv,
1446                                 CARD_STATE_CMD_DISABLE, 0);
1447                 set_bit(STATUS_RF_KILL_SW, &priv->status);
1448                         /* make sure mac80211 stop sending Tx frame */
1449                 if (priv->mac80211_registered)
1450                         ieee80211_stop_queues(priv->hw);
1451         }
1452 }
1453 EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
1454
1455 int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
1456 {
1457         unsigned long flags;
1458
1459         if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
1460                 return 0;
1461
1462         IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
1463
1464         spin_lock_irqsave(&priv->lock, flags);
1465         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
1466
1467         /* If the driver is up it will receive CARD_STATE_NOTIFICATION
1468          * notification where it will clear SW rfkill status.
1469          * Setting it here would break the handler. Only if the
1470          * interface is down we can set here since we don't
1471          * receive any further notification.
1472          */
1473         if (!priv->is_open)
1474                 clear_bit(STATUS_RF_KILL_SW, &priv->status);
1475         spin_unlock_irqrestore(&priv->lock, flags);
1476
1477         /* wake up ucode */
1478         msleep(10);
1479
1480         spin_lock_irqsave(&priv->lock, flags);
1481         iwl_read32(priv, CSR_UCODE_DRV_GP1);
1482         if (!iwl_grab_nic_access(priv))
1483                 iwl_release_nic_access(priv);
1484         spin_unlock_irqrestore(&priv->lock, flags);
1485
1486         if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
1487                 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
1488                                   "disabled by HW switch\n");
1489                 return 0;
1490         }
1491
1492         /* when driver is up while rfkill is on, it wont receive
1493          * any CARD_STATE_NOTIFICATION notifications so we have to
1494          * restart it in here
1495          */
1496         if (priv->is_open && !test_bit(STATUS_ALIVE, &priv->status)) {
1497                 clear_bit(STATUS_RF_KILL_SW, &priv->status);
1498                 if (!iwl_is_rfkill(priv))
1499                         queue_work(priv->workqueue, &priv->up);
1500         }
1501
1502         /* If the driver is already loaded, it will receive
1503          * CARD_STATE_NOTIFICATION notifications and the handler will
1504          * call restart to reload the driver.
1505          */
1506         return 1;
1507 }
1508 EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);
1509
1510 void iwl_bg_rf_kill(struct work_struct *work)
1511 {
1512         struct iwl_priv *priv = container_of(work, struct iwl_priv, rf_kill);
1513
1514         wake_up_interruptible(&priv->wait_command_queue);
1515
1516         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1517                 return;
1518
1519         mutex_lock(&priv->mutex);
1520
1521         if (!iwl_is_rfkill(priv)) {
1522                 IWL_DEBUG(IWL_DL_RF_KILL,
1523                           "HW and/or SW RF Kill no longer active, restarting "
1524                           "device\n");
1525                 if (!test_bit(STATUS_EXIT_PENDING, &priv->status) &&
1526                     test_bit(STATUS_ALIVE, &priv->status))
1527                         queue_work(priv->workqueue, &priv->restart);
1528         } else {
1529                 /* make sure mac80211 stop sending Tx frame */
1530                 if (priv->mac80211_registered)
1531                         ieee80211_stop_queues(priv->hw);
1532
1533                 if (!test_bit(STATUS_RF_KILL_HW, &priv->status))
1534                         IWL_DEBUG_RF_KILL("Can not turn radio back on - "
1535                                           "disabled by SW switch\n");
1536                 else
1537                         IWL_WARN(priv, "Radio Frequency Kill Switch is On:\n"
1538                                     "Kill switch must be turned off for "
1539                                     "wireless networking to work.\n");
1540         }
1541         mutex_unlock(&priv->mutex);
1542         iwl_rfkill_set_hw_state(priv);
1543 }
1544 EXPORT_SYMBOL(iwl_bg_rf_kill);