1 /* orinoco_cs.c (formerly known as dldwd_cs.c)
3 * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
4 * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
5 * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
6 * It should also be usable on various Prism II based cards such as the
7 * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
8 * cards such as the 3Com AirConnect and Ericsson WLAN.
10 * Copyright notice & release notes in file orinoco.c
13 #define DRIVER_NAME "orinoco_cs"
14 #define PFX DRIVER_NAME ": "
16 #include <linux/module.h>
17 #include <linux/kernel.h>
18 #include <linux/init.h>
19 #include <linux/delay.h>
20 #include <pcmcia/cs_types.h>
21 #include <pcmcia/cs.h>
22 #include <pcmcia/cistpl.h>
23 #include <pcmcia/cisreg.h>
24 #include <pcmcia/ds.h>
28 /********************************************************************/
30 /********************************************************************/
32 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
33 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
34 MODULE_LICENSE("Dual MPL/GPL");
36 /* Module parameters */
38 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
39 * don't have any CIS entry for it. This workaround it... */
40 static int ignore_cis_vcc; /* = 0 */
41 module_param(ignore_cis_vcc, int, 0);
42 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
44 /********************************************************************/
46 /********************************************************************/
48 /* PCMCIA specific device information (goes in the card field of
49 * struct orinoco_private */
50 struct orinoco_pccard {
51 struct pcmcia_device *p_dev;
54 /* Used to handle hard reset */
55 /* yuck, we need this hack to work around the insanity of the
57 unsigned long hard_reset_in_progress;
61 /********************************************************************/
62 /* Function prototypes */
63 /********************************************************************/
65 static int orinoco_cs_config(struct pcmcia_device *link);
66 static void orinoco_cs_release(struct pcmcia_device *link);
67 static void orinoco_cs_detach(struct pcmcia_device *p_dev);
69 /********************************************************************/
71 /********************************************************************/
74 orinoco_cs_hard_reset(struct orinoco_private *priv)
76 struct orinoco_pccard *card = priv->card;
77 struct pcmcia_device *link = card->p_dev;
80 /* We need atomic ops here, because we're not holding the lock */
81 set_bit(0, &card->hard_reset_in_progress);
83 err = pcmcia_reset_card(link->socket);
88 clear_bit(0, &card->hard_reset_in_progress);
93 /********************************************************************/
95 /********************************************************************/
98 * This creates an "instance" of the driver, allocating local data
99 * structures for one device. The device is registered with Card
102 * The dev_link structure is initialized, but we don't actually
103 * configure the card at this point -- we wait until we receive a card
104 * insertion event. */
106 orinoco_cs_probe(struct pcmcia_device *link)
108 struct net_device *dev;
109 struct orinoco_private *priv;
110 struct orinoco_pccard *card;
112 dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
115 priv = netdev_priv(dev);
118 /* Link both structures together */
122 /* Interrupt setup */
123 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
124 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
125 link->irq.Handler = orinoco_interrupt;
126 link->irq.Instance = dev;
128 /* General socket configuration defaults can go here. In this
129 * client, we assume very little, and rely on the CIS for
130 * almost everything. In most clients, many details (i.e.,
131 * number, sizes, and attributes of IO windows) are fixed by
132 * the nature of the device, and can be hard-wired here. */
133 link->conf.Attributes = 0;
134 link->conf.IntType = INT_MEMORY_AND_IO;
136 return orinoco_cs_config(link);
137 } /* orinoco_cs_attach */
140 * This deletes a driver "instance". The device is de-registered with
141 * Card Services. If it has been released, all local data structures
142 * are freed. Otherwise, the structures will be freed when the device
145 static void orinoco_cs_detach(struct pcmcia_device *link)
147 struct net_device *dev = link->priv;
150 unregister_netdev(dev);
152 orinoco_cs_release(link);
154 free_orinocodev(dev);
155 } /* orinoco_cs_detach */
158 * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
159 * event is received, to configure the PCMCIA socket, and to make the
160 * device available to the system.
163 #define CS_CHECK(fn, ret) do { \
164 last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
167 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
168 cistpl_cftable_entry_t *cfg,
169 cistpl_cftable_entry_t *dflt,
176 /* Use power settings for Vcc and Vpp if present */
177 /* Note that the CIS values need to be rescaled */
178 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
179 if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
180 DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
184 } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
185 if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
186 DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
192 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
194 cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
195 else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
197 dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
199 /* Do we need to allocate an interrupt? */
200 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
202 /* IO window settings */
203 p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
204 if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
205 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
206 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
207 if (!(io->flags & CISTPL_IO_8BIT))
208 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
209 if (!(io->flags & CISTPL_IO_16BIT))
210 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
211 p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
212 p_dev->io.BasePort1 = io->win[0].base;
213 p_dev->io.NumPorts1 = io->win[0].len;
215 p_dev->io.Attributes2 = p_dev->io.Attributes1;
216 p_dev->io.BasePort2 = io->win[1].base;
217 p_dev->io.NumPorts2 = io->win[1].len;
220 /* This reserves IO space but doesn't actually enable it */
221 if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
227 pcmcia_disable_device(p_dev);
232 orinoco_cs_config(struct pcmcia_device *link)
234 struct net_device *dev = link->priv;
235 struct orinoco_private *priv = netdev_priv(dev);
236 struct orinoco_pccard *card = priv->card;
237 hermes_t *hw = &priv->hw;
238 int last_fn, last_ret;
242 * In this loop, we scan the CIS for configuration table
243 * entries, each of which describes a valid card
244 * configuration, including voltage, IO window, memory window,
245 * and interrupt settings.
247 * We make no assumptions about the card to be configured: we
248 * use just the information available in the CIS. In an ideal
249 * world, this would work for any PCMCIA card, but it requires
250 * a complete and accurate CIS. In practice, a driver usually
251 * "knows" most of these things without consulting the CIS,
252 * and most client drivers will only use the CIS to fill in
253 * implementation-defined details.
255 last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
258 printk(KERN_ERR PFX "GetNextTuple(): No matching "
259 "CIS configuration. Maybe you need the "
260 "ignore_cis_vcc=1 parameter.\n");
261 cs_error(link, RequestIO, last_ret);
266 * Allocate an interrupt line. Note that this does not assign
267 * a handler to the interrupt, unless the 'Handler' member of
268 * the irq structure is initialized.
270 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
272 /* We initialize the hermes structure before completing PCMCIA
273 * configuration just in case the interrupt handler gets
275 mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
279 hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
282 * This actually configures the PCMCIA socket -- setting up
283 * the I/O windows and the interrupt mapping, and putting the
284 * card and host interface into "Memory and IO" mode.
286 CS_CHECK(RequestConfiguration,
287 pcmcia_request_configuration(link, &link->conf));
289 /* Ok, we have the configuration, prepare to register the netdev */
290 dev->base_addr = link->io.BasePort1;
291 dev->irq = link->irq.AssignedIRQ;
292 card->node.major = card->node.minor = 0;
294 SET_NETDEV_DEV(dev, &handle_to_dev(link));
295 /* Tell the stack we exist */
296 if (register_netdev(dev) != 0) {
297 printk(KERN_ERR PFX "register_netdev() failed\n");
301 /* At this point, the dev_node_t structure(s) needs to be
302 * initialized and arranged in a linked list at link->dev_node. */
303 strcpy(card->node.dev_name, dev->name);
304 link->dev_node = &card->node; /* link->dev_node being non-NULL is also
305 used to indicate that the
306 net_device has been registered */
308 /* Finally, report what we've done */
309 printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
310 "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
311 link->irq.AssignedIRQ, link->io.BasePort1,
312 link->io.BasePort1 + link->io.NumPorts1 - 1);
316 cs_error(link, last_fn, last_ret);
319 orinoco_cs_release(link);
321 } /* orinoco_cs_config */
324 * After a card is removed, orinoco_cs_release() will unregister the
325 * device, and release the PCMCIA configuration. If the device is
326 * still open, this will be postponed until it is closed.
329 orinoco_cs_release(struct pcmcia_device *link)
331 struct net_device *dev = link->priv;
332 struct orinoco_private *priv = netdev_priv(dev);
335 /* We're committed to taking the device away now, so mark the
336 * hardware as unavailable */
337 spin_lock_irqsave(&priv->lock, flags);
338 priv->hw_unavailable++;
339 spin_unlock_irqrestore(&priv->lock, flags);
341 pcmcia_disable_device(link);
343 ioport_unmap(priv->hw.iobase);
344 } /* orinoco_cs_release */
346 static int orinoco_cs_suspend(struct pcmcia_device *link)
348 struct net_device *dev = link->priv;
349 struct orinoco_private *priv = netdev_priv(dev);
350 struct orinoco_pccard *card = priv->card;
354 /* This is probably racy, but I can't think of
355 a better way, short of rewriting the PCMCIA
356 layer to not suck :-( */
357 if (! test_bit(0, &card->hard_reset_in_progress)) {
358 spin_lock_irqsave(&priv->lock, flags);
360 err = __orinoco_down(dev);
362 printk(KERN_WARNING "%s: Error %d downing interface\n",
365 netif_device_detach(dev);
366 priv->hw_unavailable++;
368 spin_unlock_irqrestore(&priv->lock, flags);
374 static int orinoco_cs_resume(struct pcmcia_device *link)
376 struct net_device *dev = link->priv;
377 struct orinoco_private *priv = netdev_priv(dev);
378 struct orinoco_pccard *card = priv->card;
381 if (! test_bit(0, &card->hard_reset_in_progress)) {
382 err = orinoco_reinit_firmware(dev);
384 printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
389 spin_lock(&priv->lock);
391 netif_device_attach(dev);
392 priv->hw_unavailable--;
394 if (priv->open && ! priv->hw_unavailable) {
395 err = __orinoco_up(dev);
397 printk(KERN_ERR "%s: Error %d restarting card\n",
401 spin_unlock(&priv->lock);
408 /********************************************************************/
409 /* Module initialization */
410 /********************************************************************/
412 /* Can't be declared "const" or the whole __initdata section will
414 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
415 " (David Gibson <hermes@gibson.dropbear.id.au>, "
416 "Pavel Roskin <proski@gnu.org>, et al)";
418 static struct pcmcia_device_id orinoco_cs_ids[] = {
419 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
420 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
421 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
422 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
423 PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
424 PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
425 PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
426 PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
427 PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
428 PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
429 PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
430 PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
431 PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
432 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
433 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
434 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
435 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
436 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
437 PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
438 PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
439 PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
440 PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
441 PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
442 PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
443 PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
444 PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
445 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
446 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
447 PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
448 PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
449 PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
450 PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
451 PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
452 PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
453 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
454 PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
455 PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
456 PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
457 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
458 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
459 PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
460 PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
461 PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
462 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
463 PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
464 PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
465 PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
466 PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
467 PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
468 PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
469 PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
470 PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
471 PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
472 PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
473 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
474 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
475 PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
476 PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
477 PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
478 PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
479 PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
480 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
481 PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
482 PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
483 PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
484 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
485 PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
486 PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
487 PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
488 PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
489 PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
490 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
491 PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
492 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
493 PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
494 PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
495 PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
496 PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
497 PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
498 PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
499 PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
502 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
504 static struct pcmcia_driver orinoco_driver = {
505 .owner = THIS_MODULE,
509 .probe = orinoco_cs_probe,
510 .remove = orinoco_cs_detach,
511 .id_table = orinoco_cs_ids,
512 .suspend = orinoco_cs_suspend,
513 .resume = orinoco_cs_resume,
517 init_orinoco_cs(void)
519 printk(KERN_DEBUG "%s\n", version);
521 return pcmcia_register_driver(&orinoco_driver);
525 exit_orinoco_cs(void)
527 pcmcia_unregister_driver(&orinoco_driver);
530 module_init(init_orinoco_cs);
531 module_exit(exit_orinoco_cs);