2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2005 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 #include <linux/moduleparam.h>
10 #include <linux/vmalloc.h>
11 #include <linux/smp_lock.h>
12 #include <linux/delay.h>
14 #include <scsi/scsi_tcq.h>
15 #include <scsi/scsicam.h>
16 #include <scsi/scsi_transport.h>
17 #include <scsi/scsi_transport_fc.h>
22 char qla2x00_version_str[40];
25 * SRB allocation cache
27 static kmem_cache_t *srb_cachep;
30 * Ioctl related information.
34 int ql2xlogintimeout = 20;
35 module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
36 MODULE_PARM_DESC(ql2xlogintimeout,
37 "Login timeout value in seconds.");
39 int qlport_down_retry = 30;
40 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
41 MODULE_PARM_DESC(qlport_down_retry,
42 "Maximum number of command retries to a port that returns"
43 "a PORT-DOWN status.");
45 int ql2xplogiabsentdevice;
46 module_param(ql2xplogiabsentdevice, int, S_IRUGO|S_IWUSR);
47 MODULE_PARM_DESC(ql2xplogiabsentdevice,
48 "Option to enable PLOGI to devices that are not present after "
49 "a Fabric scan. This is needed for several broken switches."
50 "Default is 0 - no PLOGI. 1 - perfom PLOGI.");
52 int ql2xloginretrycount = 0;
53 module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
54 MODULE_PARM_DESC(ql2xloginretrycount,
55 "Specify an alternate value for the NVRAM login retry count.");
57 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
59 module_param(ql2xfwloadflash, int, S_IRUGO|S_IRUSR);
60 MODULE_PARM_DESC(ql2xfwloadflash,
61 "Load ISP24xx firmware image from FLASH (onboard memory).");
64 static void qla2x00_free_device(scsi_qla_host_t *);
66 static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
69 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
70 MODULE_PARM_DESC(ql2xfdmienable,
71 "Enables FDMI registratons "
72 "Default is 0 - no FDMI. 1 - perfom FDMI.");
75 module_param(ql2xprocessrscn, int, S_IRUGO|S_IRUSR);
76 MODULE_PARM_DESC(ql2xprocessrscn,
77 "Option to enable port RSCN handling via a series of less"
78 "fabric intrusive ADISCs and PLOGIs.");
81 * SCSI host template entry points
83 static int qla2xxx_slave_configure(struct scsi_device * device);
84 static int qla2xxx_slave_alloc(struct scsi_device *);
85 static void qla2xxx_slave_destroy(struct scsi_device *);
86 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
87 void (*fn)(struct scsi_cmnd *));
88 static int qla24xx_queuecommand(struct scsi_cmnd *cmd,
89 void (*fn)(struct scsi_cmnd *));
90 static int qla2xxx_eh_abort(struct scsi_cmnd *);
91 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
92 static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
93 static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
94 static int qla2x00_loop_reset(scsi_qla_host_t *ha);
95 static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
97 static int qla2x00_change_queue_depth(struct scsi_device *, int);
98 static int qla2x00_change_queue_type(struct scsi_device *, int);
100 static struct scsi_host_template qla2x00_driver_template = {
101 .module = THIS_MODULE,
103 .queuecommand = qla2x00_queuecommand,
105 .eh_abort_handler = qla2xxx_eh_abort,
106 .eh_device_reset_handler = qla2xxx_eh_device_reset,
107 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
108 .eh_host_reset_handler = qla2xxx_eh_host_reset,
110 .slave_configure = qla2xxx_slave_configure,
112 .slave_alloc = qla2xxx_slave_alloc,
113 .slave_destroy = qla2xxx_slave_destroy,
114 .change_queue_depth = qla2x00_change_queue_depth,
115 .change_queue_type = qla2x00_change_queue_type,
118 .use_clustering = ENABLE_CLUSTERING,
119 .sg_tablesize = SG_ALL,
122 * The RISC allows for each command to transfer (2^32-1) bytes of data,
123 * which equates to 0x800000 sectors.
125 .max_sectors = 0xFFFF,
126 .shost_attrs = qla2x00_host_attrs,
129 static struct scsi_host_template qla24xx_driver_template = {
130 .module = THIS_MODULE,
132 .queuecommand = qla24xx_queuecommand,
134 .eh_abort_handler = qla2xxx_eh_abort,
135 .eh_device_reset_handler = qla2xxx_eh_device_reset,
136 .eh_bus_reset_handler = qla2xxx_eh_bus_reset,
137 .eh_host_reset_handler = qla2xxx_eh_host_reset,
139 .slave_configure = qla2xxx_slave_configure,
141 .slave_alloc = qla2xxx_slave_alloc,
142 .slave_destroy = qla2xxx_slave_destroy,
143 .change_queue_depth = qla2x00_change_queue_depth,
144 .change_queue_type = qla2x00_change_queue_type,
147 .use_clustering = ENABLE_CLUSTERING,
148 .sg_tablesize = SG_ALL,
150 .max_sectors = 0xFFFF,
151 .shost_attrs = qla2x00_host_attrs,
154 static struct scsi_transport_template *qla2xxx_transport_template = NULL;
156 /* TODO Convert to inlines
160 #define WATCH_INTERVAL 1 /* number of seconds */
162 static void qla2x00_timer(scsi_qla_host_t *);
164 static __inline__ void qla2x00_start_timer(scsi_qla_host_t *,
165 void *, unsigned long);
166 static __inline__ void qla2x00_restart_timer(scsi_qla_host_t *, unsigned long);
167 static __inline__ void qla2x00_stop_timer(scsi_qla_host_t *);
170 qla2x00_start_timer(scsi_qla_host_t *ha, void *func, unsigned long interval)
172 init_timer(&ha->timer);
173 ha->timer.expires = jiffies + interval * HZ;
174 ha->timer.data = (unsigned long)ha;
175 ha->timer.function = (void (*)(unsigned long))func;
176 add_timer(&ha->timer);
177 ha->timer_active = 1;
181 qla2x00_restart_timer(scsi_qla_host_t *ha, unsigned long interval)
183 mod_timer(&ha->timer, jiffies + interval * HZ);
186 static __inline__ void
187 qla2x00_stop_timer(scsi_qla_host_t *ha)
189 del_timer_sync(&ha->timer);
190 ha->timer_active = 0;
193 static int qla2x00_do_dpc(void *data);
195 static void qla2x00_rst_aen(scsi_qla_host_t *);
197 static uint8_t qla2x00_mem_alloc(scsi_qla_host_t *);
198 static void qla2x00_mem_free(scsi_qla_host_t *ha);
199 static int qla2x00_allocate_sp_pool( scsi_qla_host_t *ha);
200 static void qla2x00_free_sp_pool(scsi_qla_host_t *ha);
201 static void qla2x00_sp_free_dma(scsi_qla_host_t *, srb_t *);
202 void qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *);
204 /* -------------------------------------------------------------------------- */
207 qla2x00_pci_info_str(struct scsi_qla_host *ha, char *str)
209 static char *pci_bus_modes[] = {
210 "33", "66", "100", "133",
215 pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
218 strcat(str, pci_bus_modes[pci_bus]);
220 pci_bus = (ha->pci_attr & BIT_8) >> 8;
222 strcat(str, pci_bus_modes[pci_bus]);
224 strcat(str, " MHz)");
230 qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
232 static char *pci_bus_modes[] = { "33", "66", "100", "133", };
236 pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
239 uint16_t pcie_lstat, lspeed, lwidth;
242 pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
243 lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
244 lwidth = (pcie_lstat &
245 (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
247 strcpy(str, "PCIe (");
249 strcat(str, "2.5Gb/s ");
251 strcat(str, "<unknown> ");
252 snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
259 pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
260 if (pci_bus == 0 || pci_bus == 8) {
262 strcat(str, pci_bus_modes[pci_bus >> 3]);
266 strcat(str, "Mode 2");
268 strcat(str, "Mode 1");
270 strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
272 strcat(str, " MHz)");
278 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
282 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
283 ha->fw_minor_version,
284 ha->fw_subminor_version);
286 if (ha->fw_attributes & BIT_9) {
291 switch (ha->fw_attributes & 0xFF) {
305 sprintf(un_str, "(%x)", ha->fw_attributes);
309 if (ha->fw_attributes & 0x100)
316 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
318 sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
319 ha->fw_minor_version,
320 ha->fw_subminor_version);
322 if (ha->fw_attributes & BIT_0)
323 strcat(str, "[Class 2] ");
324 if (ha->fw_attributes & BIT_1)
325 strcat(str, "[IP] ");
326 if (ha->fw_attributes & BIT_2)
327 strcat(str, "[Multi-ID] ");
328 if (ha->fw_attributes & BIT_13)
329 strcat(str, "[Experimental]");
333 static inline srb_t *
334 qla2x00_get_new_sp(scsi_qla_host_t *ha, fc_port_t *fcport,
335 struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
339 sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC);
343 atomic_set(&sp->ref_count, 1);
348 CMD_SP(cmd) = (void *)sp;
349 cmd->scsi_done = done;
355 qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
357 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
358 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
359 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
363 rval = fc_remote_port_chkready(rport);
366 goto qc_fail_command;
369 if (atomic_read(&fcport->state) != FCS_ONLINE) {
370 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
371 atomic_read(&ha->loop_state) == LOOP_DEAD) {
372 cmd->result = DID_NO_CONNECT << 16;
373 goto qc_fail_command;
378 spin_unlock_irq(ha->host->host_lock);
380 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
382 goto qc_host_busy_lock;
384 rval = qla2x00_start_scsi(sp);
385 if (rval != QLA_SUCCESS)
386 goto qc_host_busy_free_sp;
388 spin_lock_irq(ha->host->host_lock);
392 qc_host_busy_free_sp:
393 qla2x00_sp_free_dma(ha, sp);
394 mempool_free(sp, ha->srb_mempool);
397 spin_lock_irq(ha->host->host_lock);
400 return SCSI_MLQUEUE_HOST_BUSY;
410 qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
412 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
413 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
414 struct fc_rport *rport = starget_to_rport(scsi_target(cmd->device));
418 rval = fc_remote_port_chkready(rport);
421 goto qc24_fail_command;
424 if (atomic_read(&fcport->state) != FCS_ONLINE) {
425 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD ||
426 atomic_read(&ha->loop_state) == LOOP_DEAD) {
427 cmd->result = DID_NO_CONNECT << 16;
428 goto qc24_fail_command;
433 spin_unlock_irq(ha->host->host_lock);
435 sp = qla2x00_get_new_sp(ha, fcport, cmd, done);
437 goto qc24_host_busy_lock;
439 rval = qla24xx_start_scsi(sp);
440 if (rval != QLA_SUCCESS)
441 goto qc24_host_busy_free_sp;
443 spin_lock_irq(ha->host->host_lock);
447 qc24_host_busy_free_sp:
448 qla2x00_sp_free_dma(ha, sp);
449 mempool_free(sp, ha->srb_mempool);
452 spin_lock_irq(ha->host->host_lock);
455 return SCSI_MLQUEUE_HOST_BUSY;
465 * qla2x00_eh_wait_on_command
466 * Waits for the command to be returned by the Firmware for some
470 * ha = actual ha whose done queue will contain the command
471 * returned by firmware.
472 * cmd = Scsi Command to wait on.
473 * flag = Abort/Reset(Bus or Device Reset)
480 qla2x00_eh_wait_on_command(scsi_qla_host_t *ha, struct scsi_cmnd *cmd)
482 #define ABORT_POLLING_PERIOD 1000
483 #define ABORT_WAIT_ITER ((10 * 1000) / (ABORT_POLLING_PERIOD))
484 unsigned long wait_iter = ABORT_WAIT_ITER;
485 int ret = QLA_SUCCESS;
487 while (CMD_SP(cmd)) {
488 msleep(ABORT_POLLING_PERIOD);
494 ret = QLA_FUNCTION_FAILED;
500 * qla2x00_wait_for_hba_online
501 * Wait till the HBA is online after going through
502 * <= MAX_RETRIES_OF_ISP_ABORT or
503 * finally HBA is disabled ie marked offline
506 * ha - pointer to host adapter structure
509 * Does context switching-Release SPIN_LOCK
510 * (if any) before calling this routine.
513 * Success (Adapter is online) : 0
514 * Failed (Adapter is offline/disabled) : 1
517 qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
520 unsigned long wait_online;
522 wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
523 while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
524 test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) ||
525 test_bit(ISP_ABORT_RETRY, &ha->dpc_flags) ||
526 ha->dpc_active) && time_before(jiffies, wait_online)) {
530 if (ha->flags.online)
531 return_status = QLA_SUCCESS;
533 return_status = QLA_FUNCTION_FAILED;
535 DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
537 return (return_status);
541 * qla2x00_wait_for_loop_ready
542 * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop
543 * to be in LOOP_READY state.
545 * ha - pointer to host adapter structure
548 * Does context switching-Release SPIN_LOCK
549 * (if any) before calling this routine.
553 * Success (LOOP_READY) : 0
554 * Failed (LOOP_NOT_READY) : 1
557 qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
559 int return_status = QLA_SUCCESS;
560 unsigned long loop_timeout ;
562 /* wait for 5 min at the max for loop to be ready */
563 loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ);
565 while ((!atomic_read(&ha->loop_down_timer) &&
566 atomic_read(&ha->loop_state) == LOOP_DOWN) ||
567 atomic_read(&ha->loop_state) != LOOP_READY) {
569 if (time_after_eq(jiffies, loop_timeout)) {
570 return_status = QLA_FUNCTION_FAILED;
574 return (return_status);
577 /**************************************************************************
581 * The abort function will abort the specified command.
584 * cmd = Linux SCSI command packet to be aborted.
587 * Either SUCCESS or FAILED.
590 **************************************************************************/
592 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
594 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
597 unsigned int id, lun;
598 unsigned long serial;
606 id = cmd->device->id;
607 lun = cmd->device->lun;
608 serial = cmd->serial_number;
610 /* Check active list for command command. */
611 spin_lock_irqsave(&ha->hardware_lock, flags);
612 for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
613 sp = ha->outstanding_cmds[i];
621 DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld "
622 "sp->state=%x\n", __func__, ha->host_no, sp, serial,
624 DEBUG3(qla2x00_print_scsi_cmd(cmd);)
626 spin_unlock_irqrestore(&ha->hardware_lock, flags);
627 if (ha->isp_ops.abort_command(ha, sp)) {
628 DEBUG2(printk("%s(%ld): abort_command "
629 "mbx failed.\n", __func__, ha->host_no));
631 DEBUG3(printk("%s(%ld): abort_command "
632 "mbx success.\n", __func__, ha->host_no));
635 spin_lock_irqsave(&ha->hardware_lock, flags);
639 spin_unlock_irqrestore(&ha->hardware_lock, flags);
641 /* Wait for the command to be returned. */
642 if (ret == SUCCESS) {
643 if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
644 qla_printk(KERN_ERR, ha,
645 "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
646 "%x.\n", ha->host_no, id, lun, serial, ret);
650 qla_printk(KERN_INFO, ha,
651 "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
652 id, lun, serial, ret);
657 /**************************************************************************
658 * qla2x00_eh_wait_for_pending_target_commands
661 * Waits for all the commands to come back from the specified target.
664 * ha - pointer to scsi_qla_host structure.
667 * Either SUCCESS or FAILED.
670 **************************************************************************/
672 qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
677 struct scsi_cmnd *cmd;
683 * Waiting for all commands for the designated target in the active
686 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
687 spin_lock_irqsave(&ha->hardware_lock, flags);
688 sp = ha->outstanding_cmds[cnt];
691 spin_unlock_irqrestore(&ha->hardware_lock, flags);
692 if (cmd->device->id == t) {
693 if (!qla2x00_eh_wait_on_command(ha, cmd)) {
699 spin_unlock_irqrestore(&ha->hardware_lock, flags);
706 /**************************************************************************
707 * qla2xxx_eh_device_reset
710 * The device reset function will reset the target and abort any
711 * executing commands.
713 * NOTE: The use of SP is undefined within this context. Do *NOT*
714 * attempt to use this value, even if you determine it is
718 * cmd = Linux SCSI command packet of the command that cause the
722 * SUCCESS/FAILURE (defined as macro in scsi.h).
724 **************************************************************************/
726 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
728 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
729 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
732 unsigned int id, lun;
733 unsigned long serial;
737 id = cmd->device->id;
738 lun = cmd->device->lun;
739 serial = cmd->serial_number;
741 sp = (srb_t *) CMD_SP(cmd);
745 qla_printk(KERN_INFO, ha,
746 "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
748 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
749 goto eh_dev_reset_done;
751 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
752 if (qla2x00_device_reset(ha, fcport) == 0)
755 #if defined(LOGOUT_AFTER_DEVICE_RESET)
756 if (ret == SUCCESS) {
757 if (fcport->flags & FC_FABRIC_DEVICE) {
758 ha->isp_ops.fabric_logout(ha, fcport->loop_id);
759 qla2x00_mark_device_lost(ha, fcport, 0, 0);
764 DEBUG2(printk(KERN_INFO
765 "%s failed: loop not ready\n",__func__);)
769 DEBUG3(printk("%s(%ld): device reset failed\n",
770 __func__, ha->host_no));
771 qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
774 goto eh_dev_reset_done;
777 /* Flush outstanding commands. */
778 if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
781 DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
782 __func__, ha->host_no));
783 qla_printk(KERN_INFO, ha,
784 "%s: failed while waiting for commands\n", __func__);
786 qla_printk(KERN_INFO, ha,
787 "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
793 /**************************************************************************
794 * qla2x00_eh_wait_for_pending_commands
797 * Waits for all the commands to come back from the specified host.
800 * ha - pointer to scsi_qla_host structure.
807 **************************************************************************/
809 qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
814 struct scsi_cmnd *cmd;
820 * Waiting for all commands for the designated target in the active
823 for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
824 spin_lock_irqsave(&ha->hardware_lock, flags);
825 sp = ha->outstanding_cmds[cnt];
828 spin_unlock_irqrestore(&ha->hardware_lock, flags);
829 status = qla2x00_eh_wait_on_command(ha, cmd);
834 spin_unlock_irqrestore(&ha->hardware_lock, flags);
841 /**************************************************************************
842 * qla2xxx_eh_bus_reset
845 * The bus reset function will reset the bus and abort any executing
849 * cmd = Linux SCSI command packet of the command that cause the
853 * SUCCESS/FAILURE (defined as macro in scsi.h).
855 **************************************************************************/
857 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
859 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
860 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
863 unsigned int id, lun;
864 unsigned long serial;
868 id = cmd->device->id;
869 lun = cmd->device->lun;
870 serial = cmd->serial_number;
872 sp = (srb_t *) CMD_SP(cmd);
876 qla_printk(KERN_INFO, ha,
877 "scsi(%ld:%d:%d): LOOP RESET ISSUED.\n", ha->host_no, id, lun);
879 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS) {
880 DEBUG2(printk("%s failed:board disabled\n",__func__));
881 goto eh_bus_reset_done;
884 if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
885 if (qla2x00_loop_reset(ha) == QLA_SUCCESS)
889 goto eh_bus_reset_done;
891 /* Flush outstanding commands. */
892 if (!qla2x00_eh_wait_for_pending_commands(ha))
896 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
897 (ret == FAILED) ? "failed" : "succeded");
902 /**************************************************************************
903 * qla2xxx_eh_host_reset
906 * The reset function will reset the Adapter.
909 * cmd = Linux SCSI command packet of the command that cause the
913 * Either SUCCESS or FAILED.
916 **************************************************************************/
918 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
920 scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
921 fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
924 unsigned int id, lun;
925 unsigned long serial;
929 id = cmd->device->id;
930 lun = cmd->device->lun;
931 serial = cmd->serial_number;
933 sp = (srb_t *) CMD_SP(cmd);
937 qla_printk(KERN_INFO, ha,
938 "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", ha->host_no, id, lun);
940 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
941 goto eh_host_reset_lock;
944 * Fixme-may be dpc thread is active and processing
945 * loop_resync,so wait a while for it to
946 * be completed and then issue big hammer.Otherwise
947 * it may cause I/O failure as big hammer marks the
948 * devices as lost kicking of the port_down_timer
949 * while dpc is stuck for the mailbox to complete.
951 qla2x00_wait_for_loop_ready(ha);
952 set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
953 if (qla2x00_abort_isp(ha)) {
954 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
955 /* failed. schedule dpc to try */
956 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
958 if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
959 goto eh_host_reset_lock;
961 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
963 /* Waiting for our command in done_queue to be returned to OS.*/
964 if (qla2x00_eh_wait_for_pending_commands(ha))
968 qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
969 (ret == FAILED) ? "failed" : "succeded");
979 * ha = adapter block pointer.
985 qla2x00_loop_reset(scsi_qla_host_t *ha)
987 int status = QLA_SUCCESS;
988 struct fc_port *fcport;
990 if (ha->flags.enable_lip_reset) {
991 status = qla2x00_lip_reset(ha);
994 if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
995 list_for_each_entry(fcport, &ha->fcports, list) {
996 if (fcport->port_type != FCT_TARGET)
999 status = qla2x00_device_reset(ha, fcport);
1000 if (status != QLA_SUCCESS)
1005 if (status == QLA_SUCCESS &&
1006 ((!ha->flags.enable_target_reset &&
1007 !ha->flags.enable_lip_reset) ||
1008 ha->flags.enable_lip_full_login)) {
1010 status = qla2x00_full_login_lip(ha);
1013 /* Issue marker command only when we are going to start the I/O */
1014 ha->marker_needed = 1;
1018 DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
1023 DEBUG3(printk("%s(%ld): exiting normally.\n",
1032 * qla2x00_device_reset
1033 * Issue bus device reset message to the target.
1036 * ha = adapter block pointer.
1038 * TARGET_QUEUE_LOCK must be released.
1039 * ADAPTER_STATE_LOCK must be released.
1045 qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
1047 /* Abort Target command will clear Reservation */
1048 return ha->isp_ops.abort_target(reset_fcport);
1052 qla2xxx_slave_alloc(struct scsi_device *sdev)
1054 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1056 if (!rport || fc_remote_port_chkready(rport))
1059 sdev->hostdata = *(fc_port_t **)rport->dd_data;
1065 qla2xxx_slave_configure(struct scsi_device *sdev)
1067 scsi_qla_host_t *ha = to_qla_host(sdev->host);
1068 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1070 if (sdev->tagged_supported)
1071 scsi_activate_tcq(sdev, 32);
1073 scsi_deactivate_tcq(sdev, 32);
1075 rport->dev_loss_tmo = ha->port_down_retry_count + 5;
1081 qla2xxx_slave_destroy(struct scsi_device *sdev)
1083 sdev->hostdata = NULL;
1087 qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
1089 scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
1090 return sdev->queue_depth;
1094 qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
1096 if (sdev->tagged_supported) {
1097 scsi_set_tag_type(sdev, tag_type);
1099 scsi_activate_tcq(sdev, sdev->queue_depth);
1101 scsi_deactivate_tcq(sdev, sdev->queue_depth);
1109 * qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
1112 * At exit, the @ha's flags.enable_64bit_addressing set to indicated
1113 * supported addressing method.
1116 qla2x00_config_dma_addressing(scsi_qla_host_t *ha)
1118 /* Assume a 32bit DMA mask. */
1119 ha->flags.enable_64bit_addressing = 0;
1121 if (!dma_set_mask(&ha->pdev->dev, DMA_64BIT_MASK)) {
1122 /* Any upper-dword bits set? */
1123 if (MSD(dma_get_required_mask(&ha->pdev->dev)) &&
1124 !pci_set_consistent_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
1125 /* Ok, a 64bit DMA mask is applicable. */
1126 ha->flags.enable_64bit_addressing = 1;
1127 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_64;
1128 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_64;
1133 dma_set_mask(&ha->pdev->dev, DMA_32BIT_MASK);
1134 pci_set_consistent_dma_mask(ha->pdev, DMA_32BIT_MASK);
1138 qla2x00_iospace_config(scsi_qla_host_t *ha)
1140 unsigned long pio, pio_len, pio_flags;
1141 unsigned long mmio, mmio_len, mmio_flags;
1143 /* We only need PIO for Flash operations on ISP2312 v2 chips. */
1144 pio = pci_resource_start(ha->pdev, 0);
1145 pio_len = pci_resource_len(ha->pdev, 0);
1146 pio_flags = pci_resource_flags(ha->pdev, 0);
1147 if (pio_flags & IORESOURCE_IO) {
1148 if (pio_len < MIN_IOBASE_LEN) {
1149 qla_printk(KERN_WARNING, ha,
1150 "Invalid PCI I/O region size (%s)...\n",
1151 pci_name(ha->pdev));
1155 qla_printk(KERN_WARNING, ha,
1156 "region #0 not a PIO resource (%s)...\n",
1157 pci_name(ha->pdev));
1161 /* Use MMIO operations for all accesses. */
1162 mmio = pci_resource_start(ha->pdev, 1);
1163 mmio_len = pci_resource_len(ha->pdev, 1);
1164 mmio_flags = pci_resource_flags(ha->pdev, 1);
1166 if (!(mmio_flags & IORESOURCE_MEM)) {
1167 qla_printk(KERN_ERR, ha,
1168 "region #0 not an MMIO resource (%s), aborting\n",
1169 pci_name(ha->pdev));
1170 goto iospace_error_exit;
1172 if (mmio_len < MIN_IOBASE_LEN) {
1173 qla_printk(KERN_ERR, ha,
1174 "Invalid PCI mem region size (%s), aborting\n",
1175 pci_name(ha->pdev));
1176 goto iospace_error_exit;
1179 if (pci_request_regions(ha->pdev, ha->brd_info->drv_name)) {
1180 qla_printk(KERN_WARNING, ha,
1181 "Failed to reserve PIO/MMIO regions (%s)\n",
1182 pci_name(ha->pdev));
1184 goto iospace_error_exit;
1187 ha->pio_address = pio;
1188 ha->pio_length = pio_len;
1189 ha->iobase = ioremap(mmio, MIN_IOBASE_LEN);
1191 qla_printk(KERN_ERR, ha,
1192 "cannot remap MMIO (%s), aborting\n", pci_name(ha->pdev));
1194 goto iospace_error_exit;
1204 qla2x00_enable_intrs(scsi_qla_host_t *ha)
1206 unsigned long flags = 0;
1207 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1209 spin_lock_irqsave(&ha->hardware_lock, flags);
1210 ha->interrupts_on = 1;
1211 /* enable risc and host interrupts */
1212 WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
1213 RD_REG_WORD(®->ictrl);
1214 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1219 qla2x00_disable_intrs(scsi_qla_host_t *ha)
1221 unsigned long flags = 0;
1222 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1224 spin_lock_irqsave(&ha->hardware_lock, flags);
1225 ha->interrupts_on = 0;
1226 /* disable risc and host interrupts */
1227 WRT_REG_WORD(®->ictrl, 0);
1228 RD_REG_WORD(®->ictrl);
1229 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1233 qla24xx_enable_intrs(scsi_qla_host_t *ha)
1235 unsigned long flags = 0;
1236 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1238 spin_lock_irqsave(&ha->hardware_lock, flags);
1239 ha->interrupts_on = 1;
1240 WRT_REG_DWORD(®->ictrl, ICRX_EN_RISC_INT);
1241 RD_REG_DWORD(®->ictrl);
1242 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1246 qla24xx_disable_intrs(scsi_qla_host_t *ha)
1248 unsigned long flags = 0;
1249 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1251 spin_lock_irqsave(&ha->hardware_lock, flags);
1252 ha->interrupts_on = 0;
1253 WRT_REG_DWORD(®->ictrl, 0);
1254 RD_REG_DWORD(®->ictrl);
1255 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1259 * PCI driver interface
1261 int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
1264 device_reg_t __iomem *reg;
1265 struct Scsi_Host *host;
1266 scsi_qla_host_t *ha;
1267 unsigned long flags = 0;
1268 unsigned long wait_switch = 0;
1272 struct scsi_host_template *sht;
1274 if (PCI_FUNC(pdev->devfn))
1277 if (pci_enable_device(pdev))
1280 sht = &qla2x00_driver_template;
1281 if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
1282 pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
1283 sht = &qla24xx_driver_template;
1284 host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
1287 "qla2xxx: Couldn't allocate host from scsi layer!\n");
1288 goto probe_disable_device;
1291 /* Clear our data area */
1292 ha = (scsi_qla_host_t *)host->hostdata;
1293 memset(ha, 0, sizeof(scsi_qla_host_t));
1297 ha->host_no = host->host_no;
1298 ha->brd_info = brd_info;
1299 sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no);
1303 /* Configure PCI I/O space */
1304 ret = qla2x00_iospace_config(ha);
1308 qla_printk(KERN_INFO, ha,
1309 "Found an ISP%04X, irq %d, iobase 0x%p\n", pdev->device, pdev->irq,
1312 spin_lock_init(&ha->hardware_lock);
1314 ha->prev_topology = 0;
1315 ha->ports = MAX_BUSES;
1316 ha->init_cb_size = sizeof(init_cb_t);
1317 ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
1318 ha->link_data_rate = LDR_UNKNOWN;
1319 ha->optrom_size = OPTROM_SIZE_2300;
1321 /* Assign ISP specific operations. */
1322 ha->isp_ops.pci_config = qla2100_pci_config;
1323 ha->isp_ops.reset_chip = qla2x00_reset_chip;
1324 ha->isp_ops.chip_diag = qla2x00_chip_diag;
1325 ha->isp_ops.config_rings = qla2x00_config_rings;
1326 ha->isp_ops.reset_adapter = qla2x00_reset_adapter;
1327 ha->isp_ops.nvram_config = qla2x00_nvram_config;
1328 ha->isp_ops.update_fw_options = qla2x00_update_fw_options;
1329 ha->isp_ops.load_risc = qla2x00_load_risc;
1330 ha->isp_ops.pci_info_str = qla2x00_pci_info_str;
1331 ha->isp_ops.fw_version_str = qla2x00_fw_version_str;
1332 ha->isp_ops.intr_handler = qla2100_intr_handler;
1333 ha->isp_ops.enable_intrs = qla2x00_enable_intrs;
1334 ha->isp_ops.disable_intrs = qla2x00_disable_intrs;
1335 ha->isp_ops.abort_command = qla2x00_abort_command;
1336 ha->isp_ops.abort_target = qla2x00_abort_target;
1337 ha->isp_ops.fabric_login = qla2x00_login_fabric;
1338 ha->isp_ops.fabric_logout = qla2x00_fabric_logout;
1339 ha->isp_ops.calc_req_entries = qla2x00_calc_iocbs_32;
1340 ha->isp_ops.build_iocbs = qla2x00_build_scsi_iocbs_32;
1341 ha->isp_ops.prep_ms_iocb = qla2x00_prep_ms_iocb;
1342 ha->isp_ops.prep_ms_fdmi_iocb = qla2x00_prep_ms_fdmi_iocb;
1343 ha->isp_ops.read_nvram = qla2x00_read_nvram_data;
1344 ha->isp_ops.write_nvram = qla2x00_write_nvram_data;
1345 ha->isp_ops.fw_dump = qla2100_fw_dump;
1346 ha->isp_ops.ascii_fw_dump = qla2100_ascii_fw_dump;
1347 ha->isp_ops.read_optrom = qla2x00_read_optrom_data;
1348 ha->isp_ops.write_optrom = qla2x00_write_optrom_data;
1349 if (IS_QLA2100(ha)) {
1350 host->max_id = MAX_TARGETS_2100;
1351 ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
1352 ha->request_q_length = REQUEST_ENTRY_CNT_2100;
1353 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1354 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1355 host->sg_tablesize = 32;
1356 ha->gid_list_info_size = 4;
1357 } else if (IS_QLA2200(ha)) {
1358 host->max_id = MAX_TARGETS_2200;
1359 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1360 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1361 ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
1362 ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
1363 ha->gid_list_info_size = 4;
1364 } else if (IS_QLA23XX(ha)) {
1365 host->max_id = MAX_TARGETS_2200;
1366 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1367 ha->request_q_length = REQUEST_ENTRY_CNT_2200;
1368 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1369 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1370 ha->isp_ops.pci_config = qla2300_pci_config;
1371 ha->isp_ops.intr_handler = qla2300_intr_handler;
1372 ha->isp_ops.fw_dump = qla2300_fw_dump;
1373 ha->isp_ops.ascii_fw_dump = qla2300_ascii_fw_dump;
1374 ha->isp_ops.beacon_on = qla2x00_beacon_on;
1375 ha->isp_ops.beacon_off = qla2x00_beacon_off;
1376 ha->isp_ops.beacon_blink = qla2x00_beacon_blink;
1377 ha->gid_list_info_size = 6;
1378 if (IS_QLA2322(ha) || IS_QLA6322(ha))
1379 ha->optrom_size = OPTROM_SIZE_2322;
1380 } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1381 host->max_id = MAX_TARGETS_2200;
1382 ha->mbx_count = MAILBOX_REGISTER_COUNT;
1383 ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
1384 ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
1385 ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
1386 ha->init_cb_size = sizeof(struct init_cb_24xx);
1387 ha->mgmt_svr_loop_id = 10;
1388 ha->isp_ops.pci_config = qla24xx_pci_config;
1389 ha->isp_ops.reset_chip = qla24xx_reset_chip;
1390 ha->isp_ops.chip_diag = qla24xx_chip_diag;
1391 ha->isp_ops.config_rings = qla24xx_config_rings;
1392 ha->isp_ops.reset_adapter = qla24xx_reset_adapter;
1393 ha->isp_ops.nvram_config = qla24xx_nvram_config;
1394 ha->isp_ops.update_fw_options = qla24xx_update_fw_options;
1395 ha->isp_ops.load_risc = qla24xx_load_risc;
1396 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
1397 if (ql2xfwloadflash)
1398 ha->isp_ops.load_risc = qla24xx_load_risc_flash;
1400 ha->isp_ops.pci_info_str = qla24xx_pci_info_str;
1401 ha->isp_ops.fw_version_str = qla24xx_fw_version_str;
1402 ha->isp_ops.intr_handler = qla24xx_intr_handler;
1403 ha->isp_ops.enable_intrs = qla24xx_enable_intrs;
1404 ha->isp_ops.disable_intrs = qla24xx_disable_intrs;
1405 ha->isp_ops.abort_command = qla24xx_abort_command;
1406 ha->isp_ops.abort_target = qla24xx_abort_target;
1407 ha->isp_ops.fabric_login = qla24xx_login_fabric;
1408 ha->isp_ops.fabric_logout = qla24xx_fabric_logout;
1409 ha->isp_ops.prep_ms_iocb = qla24xx_prep_ms_iocb;
1410 ha->isp_ops.prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb;
1411 ha->isp_ops.read_nvram = qla24xx_read_nvram_data;
1412 ha->isp_ops.write_nvram = qla24xx_write_nvram_data;
1413 ha->isp_ops.fw_dump = qla24xx_fw_dump;
1414 ha->isp_ops.ascii_fw_dump = qla24xx_ascii_fw_dump;
1415 ha->isp_ops.read_optrom = qla24xx_read_optrom_data;
1416 ha->isp_ops.write_optrom = qla24xx_write_optrom_data;
1417 ha->isp_ops.beacon_on = qla24xx_beacon_on;
1418 ha->isp_ops.beacon_off = qla24xx_beacon_off;
1419 ha->isp_ops.beacon_blink = qla24xx_beacon_blink;
1420 ha->gid_list_info_size = 8;
1421 ha->optrom_size = OPTROM_SIZE_24XX;
1423 host->can_queue = ha->request_q_length + 128;
1425 /* load the F/W, read paramaters, and init the H/W */
1426 ha->instance = num_hosts;
1428 init_MUTEX(&ha->mbx_cmd_sem);
1429 init_MUTEX_LOCKED(&ha->mbx_intr_sem);
1431 INIT_LIST_HEAD(&ha->list);
1432 INIT_LIST_HEAD(&ha->fcports);
1433 INIT_LIST_HEAD(&ha->rscn_fcports);
1436 * These locks are used to prevent more than one CPU
1437 * from modifying the queue at the same time. The
1438 * higher level "host_lock" will reduce most
1439 * contention for these locks.
1441 spin_lock_init(&ha->mbx_reg_lock);
1443 init_completion(&ha->dpc_inited);
1444 init_completion(&ha->dpc_exited);
1446 qla2x00_config_dma_addressing(ha);
1447 if (qla2x00_mem_alloc(ha)) {
1448 qla_printk(KERN_WARNING, ha,
1449 "[ERROR] Failed to allocate memory for adapter\n");
1455 if (qla2x00_initialize_adapter(ha) &&
1456 !(ha->device_flags & DFLG_NO_CABLE)) {
1458 qla_printk(KERN_WARNING, ha,
1459 "Failed to initialize adapter\n");
1461 DEBUG2(printk("scsi(%ld): Failed to initialize adapter - "
1462 "Adapter flags %x.\n",
1463 ha->host_no, ha->device_flags));
1470 * Startup the kernel thread for this host adapter
1472 ha->dpc_should_die = 0;
1473 ha->dpc_pid = kernel_thread(qla2x00_do_dpc, ha, 0);
1474 if (ha->dpc_pid < 0) {
1475 qla_printk(KERN_WARNING, ha,
1476 "Unable to start DPC thread!\n");
1481 wait_for_completion(&ha->dpc_inited);
1483 host->this_id = 255;
1484 host->cmd_per_lun = 3;
1485 host->unique_id = ha->instance;
1486 host->max_cmd_len = MAX_CMDSZ;
1487 host->max_channel = ha->ports - 1;
1488 host->max_lun = MAX_LUNS;
1489 host->transportt = qla2xxx_transport_template;
1491 ret = request_irq(pdev->irq, ha->isp_ops.intr_handler,
1492 SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
1494 qla_printk(KERN_WARNING, ha,
1495 "Failed to reserve interrupt %d already in use.\n",
1499 host->irq = pdev->irq;
1501 /* Initialized the timer */
1502 qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
1504 DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
1507 ha->isp_ops.disable_intrs(ha);
1509 spin_lock_irqsave(&ha->hardware_lock, flags);
1511 if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
1512 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_HOST_INT);
1513 WRT_REG_DWORD(®->isp24.hccr, HCCRX_CLR_RISC_INT);
1515 WRT_REG_WORD(®->isp.semaphore, 0);
1516 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_RISC_INT);
1517 WRT_REG_WORD(®->isp.hccr, HCCR_CLR_HOST_INT);
1519 /* Enable proper parity */
1520 if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
1523 WRT_REG_WORD(®->isp.hccr,
1524 (HCCR_ENABLE_PARITY + 0x1));
1526 /* SRAM, Instruction RAM and GP RAM parity */
1527 WRT_REG_WORD(®->isp.hccr,
1528 (HCCR_ENABLE_PARITY + 0x7));
1531 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1533 ha->isp_ops.enable_intrs(ha);
1537 * Wait around max loop_reset_delay secs for the devices to come
1538 * on-line. We don't want Linux scanning before we are ready.
1541 for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
1542 time_before(jiffies,wait_switch) &&
1543 !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
1544 && (ha->device_flags & SWITCH_FOUND) ;) {
1546 qla2x00_check_fabric_devices(ha);
1551 pci_set_drvdata(pdev, ha);
1552 ha->flags.init_done = 1;
1555 ret = scsi_add_host(host, &pdev->dev);
1559 qla2x00_alloc_sysfs_attr(ha);
1561 qla2x00_init_host_attr(ha);
1563 qla_printk(KERN_INFO, ha, "\n"
1564 " QLogic Fibre Channel HBA Driver: %s\n"
1566 " ISP%04X: %s @ %s hdma%c, host#=%ld, fw=%s\n",
1567 qla2x00_version_str, ha->model_number,
1568 ha->model_desc ? ha->model_desc: "", pdev->device,
1569 ha->isp_ops.pci_info_str(ha, pci_info), pci_name(pdev),
1570 ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
1571 ha->isp_ops.fw_version_str(ha, fw_str));
1573 /* Go with fc_rport registration. */
1574 list_for_each_entry(fcport, &ha->fcports, list)
1575 qla2x00_reg_remote_port(ha, fcport);
1580 qla2x00_free_device(ha);
1582 scsi_host_put(host);
1584 probe_disable_device:
1585 pci_disable_device(pdev);
1590 EXPORT_SYMBOL_GPL(qla2x00_probe_one);
1592 void qla2x00_remove_one(struct pci_dev *pdev)
1594 scsi_qla_host_t *ha;
1596 ha = pci_get_drvdata(pdev);
1598 qla2x00_free_sysfs_attr(ha);
1600 fc_remove_host(ha->host);
1602 scsi_remove_host(ha->host);
1604 qla2x00_free_device(ha);
1606 scsi_host_put(ha->host);
1608 pci_set_drvdata(pdev, NULL);
1610 EXPORT_SYMBOL_GPL(qla2x00_remove_one);
1613 qla2x00_free_device(scsi_qla_host_t *ha)
1617 /* Abort any outstanding IO descriptors. */
1618 if (!IS_QLA2100(ha) && !IS_QLA2200(ha))
1619 qla2x00_cancel_io_descriptors(ha);
1622 if (ha->timer_active)
1623 qla2x00_stop_timer(ha);
1625 /* Kill the kernel thread for this host */
1626 if (ha->dpc_pid >= 0) {
1627 ha->dpc_should_die = 1;
1629 ret = kill_proc(ha->dpc_pid, SIGHUP, 1);
1631 qla_printk(KERN_ERR, ha,
1632 "Unable to signal DPC thread -- (%d)\n", ret);
1634 /* TODO: SOMETHING MORE??? */
1636 wait_for_completion(&ha->dpc_exited);
1640 /* Stop currently executing firmware. */
1641 qla2x00_stop_firmware(ha);
1643 /* turn-off interrupts on the card */
1644 if (ha->interrupts_on)
1645 ha->isp_ops.disable_intrs(ha);
1647 qla2x00_mem_free(ha);
1649 ha->flags.online = 0;
1651 /* Detach interrupts */
1653 free_irq(ha->pdev->irq, ha);
1655 /* release io space registers */
1657 iounmap(ha->iobase);
1658 pci_release_regions(ha->pdev);
1660 pci_disable_device(ha->pdev);
1664 qla2x00_schedule_rport_del(struct scsi_qla_host *ha, fc_port_t *fcport,
1667 unsigned long flags;
1668 struct fc_rport *rport;
1673 rport = fcport->rport;
1675 spin_lock_irqsave(&fcport->rport_lock, flags);
1676 fcport->drport = rport;
1677 fcport->rport = NULL;
1678 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1679 set_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags);
1681 spin_lock_irqsave(&fcport->rport_lock, flags);
1682 fcport->rport = NULL;
1683 spin_unlock_irqrestore(&fcport->rport_lock, flags);
1684 fc_remote_port_delete(rport);
1689 * qla2x00_mark_device_lost Updates fcport state when device goes offline.
1691 * Input: ha = adapter block pointer. fcport = port structure pointer.
1697 void qla2x00_mark_device_lost(scsi_qla_host_t *ha, fc_port_t *fcport,
1698 int do_login, int defer)
1700 if (atomic_read(&fcport->state) == FCS_ONLINE)
1701 qla2x00_schedule_rport_del(ha, fcport, defer);
1704 * We may need to retry the login, so don't change the state of the
1705 * port but do the retries.
1707 if (atomic_read(&fcport->state) != FCS_DEVICE_DEAD)
1708 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1713 if (fcport->login_retry == 0) {
1714 fcport->login_retry = ha->login_retry_count;
1715 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
1717 DEBUG(printk("scsi(%ld): Port login retry: "
1718 "%02x%02x%02x%02x%02x%02x%02x%02x, "
1719 "id = 0x%04x retry cnt=%d\n",
1721 fcport->port_name[0],
1722 fcport->port_name[1],
1723 fcport->port_name[2],
1724 fcport->port_name[3],
1725 fcport->port_name[4],
1726 fcport->port_name[5],
1727 fcport->port_name[6],
1728 fcport->port_name[7],
1730 fcport->login_retry));
1735 * qla2x00_mark_all_devices_lost
1736 * Updates fcport state when device goes offline.
1739 * ha = adapter block pointer.
1740 * fcport = port structure pointer.
1748 qla2x00_mark_all_devices_lost(scsi_qla_host_t *ha, int defer)
1752 list_for_each_entry(fcport, &ha->fcports, list) {
1753 if (fcport->port_type != FCT_TARGET)
1757 * No point in marking the device as lost, if the device is
1760 if (atomic_read(&fcport->state) == FCS_DEVICE_DEAD)
1762 if (atomic_read(&fcport->state) == FCS_ONLINE)
1763 qla2x00_schedule_rport_del(ha, fcport, defer);
1764 atomic_set(&fcport->state, FCS_DEVICE_LOST);
1767 if (defer && ha->dpc_wait && !ha->dpc_active)
1773 * Allocates adapter memory.
1780 qla2x00_mem_alloc(scsi_qla_host_t *ha)
1788 * This will loop only once if everything goes well, else some
1789 * number of retries will be performed to get around a kernel
1790 * bug where available mem is not allocated until after a
1791 * little delay and a retry.
1793 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
1794 (ha->request_q_length + 1) * sizeof(request_t),
1795 &ha->request_dma, GFP_KERNEL);
1796 if (ha->request_ring == NULL) {
1797 qla_printk(KERN_WARNING, ha,
1798 "Memory Allocation failed - request_ring\n");
1800 qla2x00_mem_free(ha);
1806 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
1807 (ha->response_q_length + 1) * sizeof(response_t),
1808 &ha->response_dma, GFP_KERNEL);
1809 if (ha->response_ring == NULL) {
1810 qla_printk(KERN_WARNING, ha,
1811 "Memory Allocation failed - response_ring\n");
1813 qla2x00_mem_free(ha);
1819 ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE,
1820 &ha->gid_list_dma, GFP_KERNEL);
1821 if (ha->gid_list == NULL) {
1822 qla_printk(KERN_WARNING, ha,
1823 "Memory Allocation failed - gid_list\n");
1825 qla2x00_mem_free(ha);
1831 ha->rlc_rsp = dma_alloc_coherent(&ha->pdev->dev,
1832 sizeof(rpt_lun_cmd_rsp_t), &ha->rlc_rsp_dma, GFP_KERNEL);
1833 if (ha->rlc_rsp == NULL) {
1834 qla_printk(KERN_WARNING, ha,
1835 "Memory Allocation failed - rlc");
1837 qla2x00_mem_free(ha);
1843 snprintf(name, sizeof(name), "qla2xxx_%ld", ha->host_no);
1844 ha->s_dma_pool = dma_pool_create(name, &ha->pdev->dev,
1845 DMA_POOL_SIZE, 8, 0);
1846 if (ha->s_dma_pool == NULL) {
1847 qla_printk(KERN_WARNING, ha,
1848 "Memory Allocation failed - s_dma_pool\n");
1850 qla2x00_mem_free(ha);
1856 /* get consistent memory allocated for init control block */
1857 ha->init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1859 if (ha->init_cb == NULL) {
1860 qla_printk(KERN_WARNING, ha,
1861 "Memory Allocation failed - init_cb\n");
1863 qla2x00_mem_free(ha);
1868 memset(ha->init_cb, 0, ha->init_cb_size);
1870 /* Get consistent memory allocated for Get Port Database cmd */
1871 ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1872 &ha->iodesc_pd_dma);
1873 if (ha->iodesc_pd == NULL) {
1875 qla_printk(KERN_WARNING, ha,
1876 "Memory Allocation failed - iodesc_pd\n");
1878 qla2x00_mem_free(ha);
1883 memset(ha->iodesc_pd, 0, PORT_DATABASE_SIZE);
1885 /* Allocate ioctl related memory. */
1886 if (qla2x00_alloc_ioctl_mem(ha)) {
1887 qla_printk(KERN_WARNING, ha,
1888 "Memory Allocation failed - ioctl_mem\n");
1890 qla2x00_mem_free(ha);
1896 if (qla2x00_allocate_sp_pool(ha)) {
1897 qla_printk(KERN_WARNING, ha,
1898 "Memory Allocation failed - "
1899 "qla2x00_allocate_sp_pool()\n");
1901 qla2x00_mem_free(ha);
1907 /* Allocate memory for SNS commands */
1908 if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
1909 /* Get consistent memory allocated for SNS commands */
1910 ha->sns_cmd = dma_alloc_coherent(&ha->pdev->dev,
1911 sizeof(struct sns_cmd_pkt), &ha->sns_cmd_dma,
1913 if (ha->sns_cmd == NULL) {
1915 qla_printk(KERN_WARNING, ha,
1916 "Memory Allocation failed - sns_cmd\n");
1918 qla2x00_mem_free(ha);
1923 memset(ha->sns_cmd, 0, sizeof(struct sns_cmd_pkt));
1925 /* Get consistent memory allocated for MS IOCB */
1926 ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
1928 if (ha->ms_iocb == NULL) {
1930 qla_printk(KERN_WARNING, ha,
1931 "Memory Allocation failed - ms_iocb\n");
1933 qla2x00_mem_free(ha);
1938 memset(ha->ms_iocb, 0, sizeof(ms_iocb_entry_t));
1941 * Get consistent memory allocated for CT SNS
1944 ha->ct_sns = dma_alloc_coherent(&ha->pdev->dev,
1945 sizeof(struct ct_sns_pkt), &ha->ct_sns_dma,
1947 if (ha->ct_sns == NULL) {
1949 qla_printk(KERN_WARNING, ha,
1950 "Memory Allocation failed - ct_sns\n");
1952 qla2x00_mem_free(ha);
1957 memset(ha->ct_sns, 0, sizeof(struct ct_sns_pkt));
1960 /* Done all allocations without any error. */
1963 } while (retry-- && status != 0);
1967 "%s(): **** FAILED ****\n", __func__);
1975 * Frees all adapter allocated memory.
1978 * ha = adapter block pointer.
1981 qla2x00_mem_free(scsi_qla_host_t *ha)
1983 struct list_head *fcpl, *fcptemp;
1985 unsigned int wtime;/* max wait time if mbx cmd is busy. */
1989 DEBUG2(printk("%s(): ERROR invalid ha pointer.\n", __func__));
1993 /* Make sure all other threads are stopped. */
1995 while (ha->dpc_wait && wtime)
1996 wtime = msleep_interruptible(wtime);
1998 /* free ioctl memory */
1999 qla2x00_free_ioctl_mem(ha);
2002 qla2x00_free_sp_pool(ha);
2005 dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
2006 ha->sns_cmd, ha->sns_cmd_dma);
2009 dma_free_coherent(&ha->pdev->dev, sizeof(struct ct_sns_pkt),
2010 ha->ct_sns, ha->ct_sns_dma);
2013 dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma);
2016 dma_pool_free(ha->s_dma_pool, ha->iodesc_pd, ha->iodesc_pd_dma);
2019 dma_pool_free(ha->s_dma_pool, ha->init_cb, ha->init_cb_dma);
2022 dma_pool_destroy(ha->s_dma_pool);
2025 dma_free_coherent(&ha->pdev->dev,
2026 sizeof(rpt_lun_cmd_rsp_t), ha->rlc_rsp,
2030 dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list,
2033 if (ha->response_ring)
2034 dma_free_coherent(&ha->pdev->dev,
2035 (ha->response_q_length + 1) * sizeof(response_t),
2036 ha->response_ring, ha->response_dma);
2038 if (ha->request_ring)
2039 dma_free_coherent(&ha->pdev->dev,
2040 (ha->request_q_length + 1) * sizeof(request_t),
2041 ha->request_ring, ha->request_dma);
2044 ha->sns_cmd_dma = 0;
2048 ha->ms_iocb_dma = 0;
2049 ha->iodesc_pd = NULL;
2050 ha->iodesc_pd_dma = 0;
2052 ha->init_cb_dma = 0;
2054 ha->s_dma_pool = NULL;
2057 ha->rlc_rsp_dma = 0;
2058 ha->gid_list = NULL;
2059 ha->gid_list_dma = 0;
2061 ha->response_ring = NULL;
2062 ha->response_dma = 0;
2063 ha->request_ring = NULL;
2064 ha->request_dma = 0;
2066 list_for_each_safe(fcpl, fcptemp, &ha->fcports) {
2067 fcport = list_entry(fcpl, fc_port_t, list);
2070 list_del_init(&fcport->list);
2073 INIT_LIST_HEAD(&ha->fcports);
2076 free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order);
2078 vfree(ha->fw_dump24);
2080 vfree(ha->fw_dump_buffer);
2083 ha->fw_dump24 = NULL;
2085 ha->fw_dump_reading = 0;
2086 ha->fw_dump_buffer = NULL;
2088 vfree(ha->optrom_buffer);
2092 * qla2x00_allocate_sp_pool
2093 * This routine is called during initialization to allocate
2094 * memory for local srb_t.
2097 * ha = adapter block pointer.
2102 * Note: Sets the ref_count for non Null sp to one.
2105 qla2x00_allocate_sp_pool(scsi_qla_host_t *ha)
2110 ha->srb_mempool = mempool_create(SRB_MIN_REQ, mempool_alloc_slab,
2111 mempool_free_slab, srb_cachep);
2112 if (ha->srb_mempool == NULL) {
2113 qla_printk(KERN_INFO, ha, "Unable to allocate SRB mempool.\n");
2114 rval = QLA_FUNCTION_FAILED;
2120 * This routine frees all adapter allocated memory.
2124 qla2x00_free_sp_pool( scsi_qla_host_t *ha)
2126 if (ha->srb_mempool) {
2127 mempool_destroy(ha->srb_mempool);
2128 ha->srb_mempool = NULL;
2132 /**************************************************************************
2134 * This kernel thread is a task that is schedule by the interrupt handler
2135 * to perform the background processing for interrupts.
2138 * This task always run in the context of a kernel thread. It
2139 * is kick-off by the driver's detect code and starts up
2140 * up one per adapter. It immediately goes to sleep and waits for
2141 * some fibre event. When either the interrupt handler or
2142 * the timer routine detects a event it will one of the task
2143 * bits then wake us up.
2144 **************************************************************************/
2146 qla2x00_do_dpc(void *data)
2148 DECLARE_MUTEX_LOCKED(sem);
2149 scsi_qla_host_t *ha;
2152 uint16_t next_loopid;
2154 ha = (scsi_qla_host_t *)data;
2158 daemonize("%s_dpc", ha->host_str);
2159 allow_signal(SIGHUP);
2161 ha->dpc_wait = &sem;
2163 set_user_nice(current, -20);
2167 complete(&ha->dpc_inited);
2170 DEBUG3(printk("qla2x00: DPC handler sleeping\n"));
2172 if (down_interruptible(&sem))
2175 if (ha->dpc_should_die)
2178 DEBUG3(printk("qla2x00: DPC handler waking up\n"));
2180 /* Initialization not yet finished. Don't do anything yet. */
2181 if (!ha->flags.init_done || ha->dpc_active)
2184 DEBUG3(printk("scsi(%ld): DPC handler\n", ha->host_no));
2188 if (ha->flags.mbox_busy) {
2193 if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
2195 DEBUG(printk("scsi(%ld): dpc: sched "
2196 "qla2x00_abort_isp ha = %p\n",
2198 if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
2201 if (qla2x00_abort_isp(ha)) {
2202 /* failed. retry later */
2203 set_bit(ISP_ABORT_NEEDED,
2206 clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags);
2208 DEBUG(printk("scsi(%ld): dpc: qla2x00_abort_isp end\n",
2212 if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
2213 qla2x00_update_fcports(ha);
2215 if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
2216 DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
2218 qla2x00_loop_reset(ha);
2221 if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
2222 (!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
2224 DEBUG(printk("scsi(%ld): qla2x00_reset_marker()\n",
2227 qla2x00_rst_aen(ha);
2228 clear_bit(RESET_ACTIVE, &ha->dpc_flags);
2231 /* Retry each device up to login retry count */
2232 if ((test_and_clear_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2233 !test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) &&
2234 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2236 DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
2240 list_for_each_entry(fcport, &ha->fcports, list) {
2241 if (fcport->port_type != FCT_TARGET)
2245 * If the port is not ONLINE then try to login
2246 * to it if we haven't run out of retries.
2248 if (atomic_read(&fcport->state) != FCS_ONLINE &&
2249 fcport->login_retry) {
2251 fcport->login_retry--;
2252 if (fcport->flags & FCF_FABRIC_DEVICE) {
2255 ha->isp_ops.fabric_logout(
2256 ha, fcport->loop_id,
2257 fcport->d_id.b.domain,
2258 fcport->d_id.b.area,
2259 fcport->d_id.b.al_pa);
2260 status = qla2x00_fabric_login(
2261 ha, fcport, &next_loopid);
2264 qla2x00_local_device_login(
2265 ha, fcport->loop_id);
2267 if (status == QLA_SUCCESS) {
2268 fcport->old_loop_id = fcport->loop_id;
2270 DEBUG(printk("scsi(%ld): port login OK: logged in ID 0x%x\n",
2271 ha->host_no, fcport->loop_id));
2273 qla2x00_update_fcport(ha,
2275 } else if (status == 1) {
2276 set_bit(RELOGIN_NEEDED, &ha->dpc_flags);
2277 /* retry the login again */
2278 DEBUG(printk("scsi(%ld): Retrying %d login again loop_id 0x%x\n",
2280 fcport->login_retry, fcport->loop_id));
2282 fcport->login_retry = 0;
2285 if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
2288 DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
2292 if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
2293 atomic_read(&ha->loop_state) != LOOP_DOWN) {
2295 clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
2296 DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
2299 set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
2301 DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
2305 if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
2307 DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
2310 if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE,
2313 qla2x00_loop_resync(ha);
2315 clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
2318 DEBUG(printk("scsi(%ld): qla2x00_loop_resync - end\n",
2322 if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
2324 DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
2327 qla2x00_rescan_fcports(ha);
2329 DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
2334 if (!ha->interrupts_on)
2335 ha->isp_ops.enable_intrs(ha);
2337 if (test_and_clear_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags))
2338 ha->isp_ops.beacon_blink(ha);
2341 } /* End of while(1) */
2343 DEBUG(printk("scsi(%ld): DPC handler exiting\n", ha->host_no));
2346 * Make sure that nobody tries to wake us up again.
2348 ha->dpc_wait = NULL;
2351 complete_and_exit(&ha->dpc_exited, 0);
2356 * Processes asynchronous reset.
2359 * ha = adapter block pointer.
2362 qla2x00_rst_aen(scsi_qla_host_t *ha)
2364 if (ha->flags.online && !ha->flags.reset_active &&
2365 !atomic_read(&ha->loop_down_timer) &&
2366 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags))) {
2368 clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
2371 * Issue marker command only when we are going to start
2374 ha->marker_needed = 1;
2375 } while (!atomic_read(&ha->loop_down_timer) &&
2376 (test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags)));
2381 qla2x00_sp_free_dma(scsi_qla_host_t *ha, srb_t *sp)
2383 struct scsi_cmnd *cmd = sp->cmd;
2385 if (sp->flags & SRB_DMA_VALID) {
2387 dma_unmap_sg(&ha->pdev->dev, cmd->request_buffer,
2388 cmd->use_sg, cmd->sc_data_direction);
2389 } else if (cmd->request_bufflen) {
2390 dma_unmap_single(&ha->pdev->dev, sp->dma_handle,
2391 cmd->request_bufflen, cmd->sc_data_direction);
2393 sp->flags &= ~SRB_DMA_VALID;
2399 qla2x00_sp_compl(scsi_qla_host_t *ha, srb_t *sp)
2401 struct scsi_cmnd *cmd = sp->cmd;
2403 qla2x00_sp_free_dma(ha, sp);
2405 mempool_free(sp, ha->srb_mempool);
2407 cmd->scsi_done(cmd);
2410 /**************************************************************************
2416 * Context: Interrupt
2417 ***************************************************************************/
2419 qla2x00_timer(scsi_qla_host_t *ha)
2421 unsigned long cpu_flags = 0;
2429 * Ports - Port down timer.
2431 * Whenever, a port is in the LOST state we start decrementing its port
2432 * down timer every second until it reaches zero. Once it reaches zero
2433 * the port it marked DEAD.
2436 list_for_each_entry(fcport, &ha->fcports, list) {
2437 if (fcport->port_type != FCT_TARGET)
2440 if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) {
2442 if (atomic_read(&fcport->port_down_timer) == 0)
2445 if (atomic_dec_and_test(&fcport->port_down_timer) != 0)
2446 atomic_set(&fcport->state, FCS_DEVICE_DEAD);
2448 DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
2451 t, atomic_read(&fcport->port_down_timer)));
2454 } /* End of for fcport */
2457 /* Loop down handler. */
2458 if (atomic_read(&ha->loop_down_timer) > 0 &&
2459 !(test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags)) && ha->flags.online) {
2461 if (atomic_read(&ha->loop_down_timer) ==
2462 ha->loop_down_abort_time) {
2464 DEBUG(printk("scsi(%ld): Loop Down - aborting the "
2465 "queues before time expire\n",
2468 if (!IS_QLA2100(ha) && ha->link_down_timeout)
2469 atomic_set(&ha->loop_state, LOOP_DEAD);
2471 /* Schedule an ISP abort to return any tape commands. */
2472 spin_lock_irqsave(&ha->hardware_lock, cpu_flags);
2473 for (index = 1; index < MAX_OUTSTANDING_COMMANDS;
2477 sp = ha->outstanding_cmds[index];
2481 if (!(sfcp->flags & FCF_TAPE_PRESENT))
2484 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2487 spin_unlock_irqrestore(&ha->hardware_lock, cpu_flags);
2489 set_bit(ABORT_QUEUES_NEEDED, &ha->dpc_flags);
2493 /* if the loop has been down for 4 minutes, reinit adapter */
2494 if (atomic_dec_and_test(&ha->loop_down_timer) != 0) {
2495 DEBUG(printk("scsi(%ld): Loop down exceed 4 mins - "
2496 "restarting queues.\n",
2499 set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
2502 if (!(ha->device_flags & DFLG_NO_CABLE)) {
2503 DEBUG(printk("scsi(%ld): Loop down - "
2506 qla_printk(KERN_WARNING, ha,
2507 "Loop down - aborting ISP.\n");
2509 set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
2512 DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
2514 atomic_read(&ha->loop_down_timer)));
2517 /* Check if beacon LED needs to be blinked */
2518 if (ha->beacon_blink_led == 1) {
2519 set_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags);
2523 /* Schedule the DPC routine if needed */
2524 if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
2525 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
2526 test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
2527 test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
2529 test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
2530 test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
2531 test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
2532 test_bit(RELOGIN_NEEDED, &ha->dpc_flags)) &&
2533 ha->dpc_wait && !ha->dpc_active) {
2538 qla2x00_restart_timer(ha, WATCH_INTERVAL);
2541 /* XXX(hch): crude hack to emulate a down_timeout() */
2543 qla2x00_down_timeout(struct semaphore *sema, unsigned long timeout)
2545 const unsigned int step = 100; /* msecs */
2546 unsigned int iterations = jiffies_to_msecs(timeout)/100;
2549 if (!down_trylock(sema))
2551 if (msleep_interruptible(step))
2553 } while (--iterations >= 0);
2558 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2560 #define qla2x00_release_firmware() do { } while (0)
2561 #define qla2x00_pci_module_init() (0)
2562 #define qla2x00_pci_module_exit() do { } while (0)
2564 #else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
2566 /* Firmware interface routines. */
2569 #define FW_ISP21XX 0
2570 #define FW_ISP22XX 1
2571 #define FW_ISP2300 2
2572 #define FW_ISP2322 3
2573 #define FW_ISP63XX 4
2574 #define FW_ISP24XX 5
2576 static DECLARE_MUTEX(qla_fw_lock);
2578 static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
2579 { .name = "ql2100_fw.bin", .segs = { 0x1000, 0 }, },
2580 { .name = "ql2200_fw.bin", .segs = { 0x1000, 0 }, },
2581 { .name = "ql2300_fw.bin", .segs = { 0x800, 0 }, },
2582 { .name = "ql2322_fw.bin", .segs = { 0x800, 0x1c000, 0x1e000, 0 }, },
2583 { .name = "ql6312_fw.bin", .segs = { 0x800, 0 }, },
2584 { .name = "ql2400_fw.bin", },
2588 qla2x00_request_firmware(scsi_qla_host_t *ha)
2590 struct fw_blob *blob;
2593 if (IS_QLA2100(ha)) {
2594 blob = &qla_fw_blobs[FW_ISP21XX];
2595 } else if (IS_QLA2200(ha)) {
2596 blob = &qla_fw_blobs[FW_ISP22XX];
2597 } else if (IS_QLA2300(ha) || IS_QLA2312(ha)) {
2598 blob = &qla_fw_blobs[FW_ISP2300];
2599 } else if (IS_QLA2322(ha)) {
2600 blob = &qla_fw_blobs[FW_ISP2322];
2601 } else if (IS_QLA6312(ha) || IS_QLA6322(ha)) {
2602 blob = &qla_fw_blobs[FW_ISP63XX];
2603 } else if (IS_QLA24XX(ha)) {
2604 blob = &qla_fw_blobs[FW_ISP24XX];
2611 if (request_firmware(&blob->fw, blob->name, &ha->pdev->dev)) {
2612 DEBUG2(printk("scsi(%ld): Failed to load firmware image "
2613 "(%s).\n", ha->host_no, blob->name));
2625 qla2x00_release_firmware(void)
2630 for (idx = 0; idx < FW_BLOBS; idx++)
2631 if (qla_fw_blobs[idx].fw)
2632 release_firmware(qla_fw_blobs[idx].fw);
2636 static struct qla_board_info qla_board_tbl = {
2637 .drv_name = "qla2xxx",
2640 static struct pci_device_id qla2xxx_pci_tbl[] = {
2641 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
2642 PCI_ANY_ID, PCI_ANY_ID, },
2643 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
2644 PCI_ANY_ID, PCI_ANY_ID, },
2645 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2300,
2646 PCI_ANY_ID, PCI_ANY_ID, },
2647 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2312,
2648 PCI_ANY_ID, PCI_ANY_ID, },
2649 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2322,
2650 PCI_ANY_ID, PCI_ANY_ID, },
2651 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6312,
2652 PCI_ANY_ID, PCI_ANY_ID, },
2653 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322,
2654 PCI_ANY_ID, PCI_ANY_ID, },
2655 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422,
2656 PCI_ANY_ID, PCI_ANY_ID, },
2657 { PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432,
2658 PCI_ANY_ID, PCI_ANY_ID, },
2661 MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
2663 static int __devinit
2664 qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
2666 return qla2x00_probe_one(pdev, &qla_board_tbl);
2669 static void __devexit
2670 qla2xxx_remove_one(struct pci_dev *pdev)
2672 qla2x00_remove_one(pdev);
2675 static struct pci_driver qla2xxx_pci_driver = {
2678 .owner = THIS_MODULE,
2680 .id_table = qla2xxx_pci_tbl,
2681 .probe = qla2xxx_probe_one,
2682 .remove = __devexit_p(qla2xxx_remove_one),
2686 qla2x00_pci_module_init(void)
2688 return pci_module_init(&qla2xxx_pci_driver);
2692 qla2x00_pci_module_exit(void)
2694 pci_unregister_driver(&qla2xxx_pci_driver);
2700 * qla2x00_module_init - Module initialization.
2703 qla2x00_module_init(void)
2707 /* Allocate cache for SRBs. */
2708 srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
2709 SLAB_HWCACHE_ALIGN, NULL, NULL);
2710 if (srb_cachep == NULL) {
2712 "qla2xxx: Unable to allocate SRB cache...Failing load!\n");
2716 /* Derive version string. */
2717 strcpy(qla2x00_version_str, QLA2XXX_VERSION);
2718 #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
2719 strcat(qla2x00_version_str, "-fw");
2722 strcat(qla2x00_version_str, "-debug");
2724 qla2xxx_transport_template =
2725 fc_attach_transport(&qla2xxx_transport_functions);
2726 if (!qla2xxx_transport_template)
2729 printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
2730 ret = qla2x00_pci_module_init();
2732 kmem_cache_destroy(srb_cachep);
2733 fc_release_transport(qla2xxx_transport_template);
2739 * qla2x00_module_exit - Module cleanup.
2742 qla2x00_module_exit(void)
2744 qla2x00_pci_module_exit();
2745 qla2x00_release_firmware();
2746 kmem_cache_destroy(srb_cachep);
2747 fc_release_transport(qla2xxx_transport_template);
2750 module_init(qla2x00_module_init);
2751 module_exit(qla2x00_module_exit);
2753 MODULE_AUTHOR("QLogic Corporation");
2754 MODULE_DESCRIPTION("QLogic Fibre Channel HBA Driver");
2755 MODULE_LICENSE("GPL");
2756 MODULE_VERSION(QLA2XXX_VERSION);