drivers/scsi/qla2xxx/qla_sup.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/delay.h>
  10 #include <asm/uaccess.h>
  11
  12 static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
  13 static void qla2x00_nv_deselect(scsi_qla_host_t *);
  14 static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);
  15
  16 /*
  17  * NVRAM support routines
  18  */
  19
  20 /**
  21  * qla2x00_lock_nvram_access() -
  22  * @ha: HA context
  23  */
  24 void
  25 qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
  26 {
  27         uint16_t data;
  28         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  29
  30         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  31                 data = RD_REG_WORD(&reg->nvram);
  32                 while (data & NVR_BUSY) {
  33                         udelay(100);
  34                         data = RD_REG_WORD(&reg->nvram);
  35                 }
  36
  37                 /* Lock resource */
  38                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  39                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  40                 udelay(5);
  41                 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  42                 while ((data & BIT_0) == 0) {
  43                         /* Lock failed */
  44                         udelay(100);
  45                         WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  46                         RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  47                         udelay(5);
  48                         data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  49                 }
  50         }
  51 }
  52
  53 /**
  54  * qla2x00_unlock_nvram_access() -
  55  * @ha: HA context
  56  */
  57 void
  58 qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
  59 {
  60         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  61
  62         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  63                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
  64                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  65         }
  66 }
  67
  68 /**
  69  * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
  70  *      request routine to get the word from NVRAM.
  71  * @ha: HA context
  72  * @addr: Address in NVRAM to read
  73  *
  74  * Returns the word read from nvram @addr.
  75  */
  76 uint16_t
  77 qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
  78 {
  79         uint16_t        data;
  80         uint32_t        nv_cmd;
  81
  82         nv_cmd = addr << 16;
  83         nv_cmd |= NV_READ_OP;
  84         data = qla2x00_nvram_request(ha, nv_cmd);
  85
  86         return (data);
  87 }
  88
  89 /**
  90  * qla2x00_write_nvram_word() - Write NVRAM data.
  91  * @ha: HA context
  92  * @addr: Address in NVRAM to write
  93  * @data: word to program
  94  */
  95 void
  96 qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
  97 {
  98         int count;
  99         uint16_t word;
 100         uint32_t nv_cmd, wait_cnt;
 101         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 102
 103         qla2x00_nv_write(ha, NVR_DATA_OUT);
 104         qla2x00_nv_write(ha, 0);
 105         qla2x00_nv_write(ha, 0);
 106
 107         for (word = 0; word < 8; word++)
 108                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 109
 110         qla2x00_nv_deselect(ha);
 111
 112         /* Write data */
 113         nv_cmd = (addr << 16) | NV_WRITE_OP;
 114         nv_cmd |= data;
 115         nv_cmd <<= 5;
 116         for (count = 0; count < 27; count++) {
 117                 if (nv_cmd & BIT_31)
 118                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 119                 else
 120                         qla2x00_nv_write(ha, 0);
 121
 122                 nv_cmd <<= 1;
 123         }
 124
 125         qla2x00_nv_deselect(ha);
 126
 127         /* Wait for NVRAM to become ready */
 128         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 129         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 130         wait_cnt = NVR_WAIT_CNT;
 131         do {
 132                 if (!--wait_cnt) {
 133                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 134                             __func__, ha->host_no));
 135                         break;
 136                 }
 137                 NVRAM_DELAY();
 138                 word = RD_REG_WORD(&reg->nvram);
 139         } while ((word & NVR_DATA_IN) == 0);
 140
 141         qla2x00_nv_deselect(ha);
 142
 143         /* Disable writes */
 144         qla2x00_nv_write(ha, NVR_DATA_OUT);
 145         for (count = 0; count < 10; count++)
 146                 qla2x00_nv_write(ha, 0);
 147
 148         qla2x00_nv_deselect(ha);
 149 }
 150
 151 static int
 152 qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
 153     uint32_t tmo)
 154 {
 155         int ret, count;
 156         uint16_t word;
 157         uint32_t nv_cmd;
 158         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 159
 160         ret = QLA_SUCCESS;
 161
 162         qla2x00_nv_write(ha, NVR_DATA_OUT);
 163         qla2x00_nv_write(ha, 0);
 164         qla2x00_nv_write(ha, 0);
 165
 166         for (word = 0; word < 8; word++)
 167                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 168
 169         qla2x00_nv_deselect(ha);
 170
 171         /* Write data */
 172         nv_cmd = (addr << 16) | NV_WRITE_OP;
 173         nv_cmd |= data;
 174         nv_cmd <<= 5;
 175         for (count = 0; count < 27; count++) {
 176                 if (nv_cmd & BIT_31)
 177                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 178                 else
 179                         qla2x00_nv_write(ha, 0);
 180
 181                 nv_cmd <<= 1;
 182         }
 183
 184         qla2x00_nv_deselect(ha);
 185
 186         /* Wait for NVRAM to become ready */
 187         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 188         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 189         do {
 190                 NVRAM_DELAY();
 191                 word = RD_REG_WORD(&reg->nvram);
 192                 if (!--tmo) {
 193                         ret = QLA_FUNCTION_FAILED;
 194                         break;
 195                 }
 196         } while ((word & NVR_DATA_IN) == 0);
 197
 198         qla2x00_nv_deselect(ha);
 199
 200         /* Disable writes */
 201         qla2x00_nv_write(ha, NVR_DATA_OUT);
 202         for (count = 0; count < 10; count++)
 203                 qla2x00_nv_write(ha, 0);
 204
 205         qla2x00_nv_deselect(ha);
 206
 207         return ret;
 208 }
 209
 210 /**
 211  * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
 212  *      NVRAM.
 213  * @ha: HA context
 214  * @nv_cmd: NVRAM command
 215  *
 216  * Bit definitions for NVRAM command:
 217  *
 218  *      Bit 26     = start bit
 219  *      Bit 25, 24 = opcode
 220  *      Bit 23-16  = address
 221  *      Bit 15-0   = write data
 222  *
 223  * Returns the word read from nvram @addr.
 224  */
 225 static uint16_t
 226 qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
 227 {
 228         uint8_t         cnt;
 229         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 230         uint16_t        data = 0;
 231         uint16_t        reg_data;
 232
 233         /* Send command to NVRAM. */
 234         nv_cmd <<= 5;
 235         for (cnt = 0; cnt < 11; cnt++) {
 236                 if (nv_cmd & BIT_31)
 237                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 238                 else
 239                         qla2x00_nv_write(ha, 0);
 240                 nv_cmd <<= 1;
 241         }
 242
 243         /* Read data from NVRAM. */
 244         for (cnt = 0; cnt < 16; cnt++) {
 245                 WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
 246                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 247                 NVRAM_DELAY();
 248                 data <<= 1;
 249                 reg_data = RD_REG_WORD(&reg->nvram);
 250                 if (reg_data & NVR_DATA_IN)
 251                         data |= BIT_0;
 252                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 253                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 254                 NVRAM_DELAY();
 255         }
 256
 257         /* Deselect chip. */
 258         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 259         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 260         NVRAM_DELAY();
 261
 262         return (data);
 263 }
 264
 265 /**
 266  * qla2x00_nv_write() - Clean NVRAM operations.
 267  * @ha: HA context
 268  */
 269 static void
 270 qla2x00_nv_deselect(scsi_qla_host_t *ha)
 271 {
 272         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 273
 274         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 275         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 276         NVRAM_DELAY();
 277 }
 278
 279 /**
 280  * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
 281  * @ha: HA context
 282  * @data: Serial interface selector
 283  */
 284 static void
 285 qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
 286 {
 287         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 288
 289         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 290         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 291         NVRAM_DELAY();
 292         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT| NVR_CLOCK |
 293             NVR_WRT_ENABLE);
 294         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 295         NVRAM_DELAY();
 296         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 297         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 298         NVRAM_DELAY();
 299 }
 300
 301 /**
 302  * qla2x00_clear_nvram_protection() -
 303  * @ha: HA context
 304  */
 305 static int
 306 qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
 307 {
 308         int ret, stat;
 309         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 310         uint32_t word, wait_cnt;
 311         uint16_t wprot, wprot_old;
 312
 313         /* Clear NVRAM write protection. */
 314         ret = QLA_FUNCTION_FAILED;
 315
 316         wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 317         stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
 318             __constant_cpu_to_le16(0x1234), 100000);
 319         wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 320         if (stat != QLA_SUCCESS || wprot != 0x1234) {
 321                 /* Write enable. */
 322                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 323                 qla2x00_nv_write(ha, 0);
 324                 qla2x00_nv_write(ha, 0);
 325                 for (word = 0; word < 8; word++)
 326                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 327
 328                 qla2x00_nv_deselect(ha);
 329
 330                 /* Enable protection register. */
 331                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 332                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 333                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 334                 for (word = 0; word < 8; word++)
 335                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 336
 337                 qla2x00_nv_deselect(ha);
 338
 339                 /* Clear protection register (ffff is cleared). */
 340                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 341                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 342                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 343                 for (word = 0; word < 8; word++)
 344                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 345
 346                 qla2x00_nv_deselect(ha);
 347
 348                 /* Wait for NVRAM to become ready. */
 349                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 350                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 351                 wait_cnt = NVR_WAIT_CNT;
 352                 do {
 353                         if (!--wait_cnt) {
 354                                 DEBUG9_10(printk("%s(%ld): NVRAM didn't go "
 355                                     "ready...\n", __func__,
 356                                     ha->host_no));
 357                                 break;
 358                         }
 359                         NVRAM_DELAY();
 360                         word = RD_REG_WORD(&reg->nvram);
 361                 } while ((word & NVR_DATA_IN) == 0);
 362
 363                 if (wait_cnt)
 364                         ret = QLA_SUCCESS;
 365         } else
 366                 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
 367
 368         return ret;
 369 }
 370
 371 static void
 372 qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
 373 {
 374         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 375         uint32_t word, wait_cnt;
 376
 377         if (stat != QLA_SUCCESS)
 378                 return;
 379
 380         /* Set NVRAM write protection. */
 381         /* Write enable. */
 382         qla2x00_nv_write(ha, NVR_DATA_OUT);
 383         qla2x00_nv_write(ha, 0);
 384         qla2x00_nv_write(ha, 0);
 385         for (word = 0; word < 8; word++)
 386                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 387
 388         qla2x00_nv_deselect(ha);
 389
 390         /* Enable protection register. */
 391         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 392         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 393         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 394         for (word = 0; word < 8; word++)
 395                 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 396
 397         qla2x00_nv_deselect(ha);
 398
 399         /* Enable protection register. */
 400         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 401         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 402         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 403         for (word = 0; word < 8; word++)
 404                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 405
 406         qla2x00_nv_deselect(ha);
 407
 408         /* Wait for NVRAM to become ready. */
 409         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 410         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 411         wait_cnt = NVR_WAIT_CNT;
 412         do {
 413                 if (!--wait_cnt) {
 414                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 415                             __func__, ha->host_no));
 416                         break;
 417                 }
 418                 NVRAM_DELAY();
 419                 word = RD_REG_WORD(&reg->nvram);
 420         } while ((word & NVR_DATA_IN) == 0);
 421 }
 422
 423
 424 /*****************************************************************************/
 425 /* Flash Manipulation Routines                                               */
 426 /*****************************************************************************/
 427
 428 static inline uint32_t
 429 flash_conf_to_access_addr(uint32_t faddr)
 430 {
 431         return FARX_ACCESS_FLASH_CONF | faddr;
 432 }
 433
 434 static inline uint32_t
 435 flash_data_to_access_addr(uint32_t faddr)
 436 {
 437         return FARX_ACCESS_FLASH_DATA | faddr;
 438 }
 439
 440 static inline uint32_t
 441 nvram_conf_to_access_addr(uint32_t naddr)
 442 {
 443         return FARX_ACCESS_NVRAM_CONF | naddr;
 444 }
 445
 446 static inline uint32_t
 447 nvram_data_to_access_addr(uint32_t naddr)
 448 {
 449         return FARX_ACCESS_NVRAM_DATA | naddr;
 450 }
 451
 452 static uint32_t
 453 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 454 {
 455         int rval;
 456         uint32_t cnt, data;
 457         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 458
 459         WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
 460         /* Wait for READ cycle to complete. */
 461         rval = QLA_SUCCESS;
 462         for (cnt = 3000;
 463             (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
 464             rval == QLA_SUCCESS; cnt--) {
 465                 if (cnt)
 466                         udelay(10);
 467                 else
 468                         rval = QLA_FUNCTION_TIMEOUT;
 469                 cond_resched();
 470         }
 471
 472         /* TODO: What happens if we time out? */
 473         data = 0xDEADDEAD;
 474         if (rval == QLA_SUCCESS)
 475                 data = RD_REG_DWORD(&reg->flash_data);
 476
 477         return data;
 478 }
 479
 480 uint32_t *
 481 qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 482     uint32_t dwords)
 483 {
 484         uint32_t i;
 485
 486         /* Dword reads to flash. */
 487         for (i = 0; i < dwords; i++, faddr++)
 488                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 489                     flash_data_to_access_addr(faddr)));
 490
 491         return dwptr;
 492 }
 493
 494 static int
 495 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 496 {
 497         int rval;
 498         uint32_t cnt;
 499         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 500
 501         WRT_REG_DWORD(&reg->flash_data, data);
 502         RD_REG_DWORD(&reg->flash_data);         /* PCI Posting. */
 503         WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
 504         /* Wait for Write cycle to complete. */
 505         rval = QLA_SUCCESS;
 506         for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
 507             rval == QLA_SUCCESS; cnt--) {
 508                 if (cnt)
 509                         udelay(10);
 510                 else
 511                         rval = QLA_FUNCTION_TIMEOUT;
 512                 cond_resched();
 513         }
 514         return rval;
 515 }
 516
 517 static void
 518 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
 519     uint8_t *flash_id)
 520 {
 521         uint32_t ids;
 522
 523         ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
 524         *man_id = LSB(ids);
 525         *flash_id = MSB(ids);
 526
 527         /* Check if man_id and flash_id are valid. */
 528         if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
 529                 /* Read information using 0x9f opcode
 530                  * Device ID, Mfg ID would be read in the format:
 531                  *   <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
 532                  * Example: ATMEL 0x00 01 45 1F
 533                  * Extract MFG and Dev ID from last two bytes.
 534                  */
 535                 ids = qla24xx_read_flash_dword(ha,
 536                     flash_data_to_access_addr(0xd009f));
 537                 *man_id = LSB(ids);
 538                 *flash_id = MSB(ids);
 539         }
 540 }
 541
 542 static int
 543 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 544     uint32_t dwords)
 545 {
 546         int ret;
 547         uint32_t liter;
 548         uint32_t sec_mask, rest_addr, conf_addr, sec_end_mask;
 549         uint32_t fdata, findex ;
 550         uint8_t man_id, flash_id;
 551         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 552
 553         ret = QLA_SUCCESS;
 554
 555         qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
 556         DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
 557             ha->host_no, man_id, flash_id));
 558
 559         sec_end_mask = 0;
 560         conf_addr = flash_conf_to_access_addr(0x03d8);
 561         switch (man_id) {
 562         case 0xbf: /* STT flash. */
 563                 rest_addr = 0x1fff;
 564                 sec_mask = 0x3e000;
 565                 if (flash_id == 0x80)
 566                         conf_addr = flash_conf_to_access_addr(0x0352);
 567                 break;
 568         case 0x13: /* ST M25P80. */
 569                 rest_addr = 0x3fff;
 570                 sec_mask = 0x3c000;
 571                 break;
 572         case 0x1f: // Atmel 26DF081A
 573                 rest_addr = 0x0fff;
 574                 sec_mask = 0xff000;
 575                 sec_end_mask = 0x003ff;
 576                 conf_addr = flash_conf_to_access_addr(0x0320);
 577                 break;
 578         default:
 579                 /* Default to 64 kb sector size. */
 580                 rest_addr = 0x3fff;
 581                 sec_mask = 0x3c000;
 582                 break;
 583         }
 584
 585         /* Enable flash write. */
 586         WRT_REG_DWORD(&reg->ctrl_status,
 587             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 588         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 589
 590         /* Disable flash write-protection. */
 591         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 592         /* Some flash parts need an additional zero-write to clear bits.*/
 593         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 594
 595         do {    /* Loop once to provide quick error exit. */
 596                 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
 597                         if (man_id == 0x1f) {
 598                                 findex = faddr << 2;
 599                                 fdata = findex & sec_mask;
 600                         } else {
 601                                 findex = faddr;
 602                                 fdata = (findex & sec_mask) << 2;
 603                         }
 604
 605                         /* Are we at the beginning of a sector? */
 606                         if ((findex & rest_addr) == 0) {
 607                                 /*
 608                                  * Do sector unprotect at 4K boundry for Atmel
 609                                  * part.
 610                                  */
 611                                 if (man_id == 0x1f)
 612                                         qla24xx_write_flash_dword(ha,
 613                                             flash_conf_to_access_addr(0x0339),
 614                                             (fdata & 0xff00) | ((fdata << 16) &
 615                                             0xff0000) | ((fdata >> 16) & 0xff));
 616                                 ret = qla24xx_write_flash_dword(ha, conf_addr,
 617                                     (fdata & 0xff00) |((fdata << 16) &
 618                                     0xff0000) | ((fdata >> 16) & 0xff));
 619                                 if (ret != QLA_SUCCESS) {
 620                                         DEBUG9(printk("%s(%ld) Unable to flash "
 621                                             "sector: address=%x.\n", __func__,
 622                                             ha->host_no, faddr));
 623                                         break;
 624                                 }
 625                         }
 626                         ret = qla24xx_write_flash_dword(ha,
 627                             flash_data_to_access_addr(faddr),
 628                             cpu_to_le32(*dwptr));
 629                         if (ret != QLA_SUCCESS) {
 630                                 DEBUG9(printk("%s(%ld) Unable to program flash "
 631                                     "address=%x data=%x.\n", __func__,
 632                                     ha->host_no, faddr, *dwptr));
 633                                 break;
 634                         }
 635
 636                         /* Do sector protect at 4K boundry for Atmel part. */
 637                         if (man_id == 0x1f &&
 638                             ((faddr & sec_end_mask) == 0x3ff))
 639                                 qla24xx_write_flash_dword(ha,
 640                                     flash_conf_to_access_addr(0x0336),
 641                                     (fdata & 0xff00) | ((fdata << 16) &
 642                                     0xff0000) | ((fdata >> 16) & 0xff));
 643                 }
 644         } while (0);
 645
 646         /* Enable flash write-protection. */
 647         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
 648
 649         /* Disable flash write. */
 650         WRT_REG_DWORD(&reg->ctrl_status,
 651             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 652         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 653
 654         return ret;
 655 }
 656
 657 uint8_t *
 658 qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 659     uint32_t bytes)
 660 {
 661         uint32_t i;
 662         uint16_t *wptr;
 663
 664         /* Word reads to NVRAM via registers. */
 665         wptr = (uint16_t *)buf;
 666         qla2x00_lock_nvram_access(ha);
 667         for (i = 0; i < bytes >> 1; i++, naddr++)
 668                 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
 669                     naddr));
 670         qla2x00_unlock_nvram_access(ha);
 671
 672         return buf;
 673 }
 674
 675 uint8_t *
 676 qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 677     uint32_t bytes)
 678 {
 679         uint32_t i;
 680         uint32_t *dwptr;
 681
 682         /* Dword reads to flash. */
 683         dwptr = (uint32_t *)buf;
 684         for (i = 0; i < bytes >> 2; i++, naddr++)
 685                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 686                     nvram_data_to_access_addr(naddr)));
 687
 688         return buf;
 689 }
 690
 691 int
 692 qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 693     uint32_t bytes)
 694 {
 695         int ret, stat;
 696         uint32_t i;
 697         uint16_t *wptr;
 698
 699         ret = QLA_SUCCESS;
 700
 701         qla2x00_lock_nvram_access(ha);
 702
 703         /* Disable NVRAM write-protection. */
 704         stat = qla2x00_clear_nvram_protection(ha);
 705
 706         wptr = (uint16_t *)buf;
 707         for (i = 0; i < bytes >> 1; i++, naddr++) {
 708                 qla2x00_write_nvram_word(ha, naddr,
 709                     cpu_to_le16(*wptr));
 710                 wptr++;
 711         }
 712
 713         /* Enable NVRAM write-protection. */
 714         qla2x00_set_nvram_protection(ha, stat);
 715
 716         qla2x00_unlock_nvram_access(ha);
 717
 718         return ret;
 719 }
 720
 721 int
 722 qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 723     uint32_t bytes)
 724 {
 725         int ret;
 726         uint32_t i;
 727         uint32_t *dwptr;
 728         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 729
 730         ret = QLA_SUCCESS;
 731
 732         /* Enable flash write. */
 733         WRT_REG_DWORD(&reg->ctrl_status,
 734             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 735         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 736
 737         /* Disable NVRAM write-protection. */
 738         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 739             0);
 740         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 741             0);
 742
 743         /* Dword writes to flash. */
 744         dwptr = (uint32_t *)buf;
 745         for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
 746                 ret = qla24xx_write_flash_dword(ha,
 747                     nvram_data_to_access_addr(naddr),
 748                     cpu_to_le32(*dwptr));
 749                 if (ret != QLA_SUCCESS) {
 750                         DEBUG9(printk("%s(%ld) Unable to program "
 751                             "nvram address=%x data=%x.\n", __func__,
 752                             ha->host_no, naddr, *dwptr));
 753                         break;
 754                 }
 755         }
 756
 757         /* Enable NVRAM write-protection. */
 758         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 759             0x8c);
 760
 761         /* Disable flash write. */
 762         WRT_REG_DWORD(&reg->ctrl_status,
 763             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 764         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 765
 766         return ret;
 767 }
 768
 769 uint8_t *
 770 qla25xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 771     uint32_t bytes)
 772 {
 773         uint32_t i;
 774         uint32_t *dwptr;
 775
 776         /* Dword reads to flash. */
 777         dwptr = (uint32_t *)buf;
 778         for (i = 0; i < bytes >> 2; i++, naddr++)
 779                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 780                     flash_data_to_access_addr(FA_VPD_NVRAM_ADDR | naddr)));
 781
 782         return buf;
 783 }
 784
 785 int
 786 qla25xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 787     uint32_t bytes)
 788 {
 789         return qla24xx_write_flash_data(ha, (uint32_t *)buf,
 790             FA_VPD_NVRAM_ADDR | naddr, bytes >> 2);
 791 }
 792
 793 static inline void
 794 qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
 795 {
 796         if (IS_QLA2322(ha)) {
 797                 /* Flip all colors. */
 798                 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
 799                         /* Turn off. */
 800                         ha->beacon_color_state = 0;
 801                         *pflags = GPIO_LED_ALL_OFF;
 802                 } else {
 803                         /* Turn on. */
 804                         ha->beacon_color_state = QLA_LED_ALL_ON;
 805                         *pflags = GPIO_LED_RGA_ON;
 806                 }
 807         } else {
 808                 /* Flip green led only. */
 809                 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
 810                         /* Turn off. */
 811                         ha->beacon_color_state = 0;
 812                         *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
 813                 } else {
 814                         /* Turn on. */
 815                         ha->beacon_color_state = QLA_LED_GRN_ON;
 816                         *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
 817                 }
 818         }
 819 }
 820
 821 void
 822 qla2x00_beacon_blink(struct scsi_qla_host *ha)
 823 {
 824         uint16_t gpio_enable;
 825         uint16_t gpio_data;
 826         uint16_t led_color = 0;
 827         unsigned long flags;
 828         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 829
 830         if (ha->pio_address)
 831                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
 832
 833         spin_lock_irqsave(&ha->hardware_lock, flags);
 834
 835         /* Save the Original GPIOE. */
 836         if (ha->pio_address) {
 837                 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
 838                 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
 839         } else {
 840                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 841                 gpio_data = RD_REG_WORD(&reg->gpiod);
 842         }
 843
 844         /* Set the modified gpio_enable values */
 845         gpio_enable |= GPIO_LED_MASK;
 846
 847         if (ha->pio_address) {
 848                 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
 849         } else {
 850                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 851                 RD_REG_WORD(&reg->gpioe);
 852         }
 853
 854         qla2x00_flip_colors(ha, &led_color);
 855
 856         /* Clear out any previously set LED color. */
 857         gpio_data &= ~GPIO_LED_MASK;
 858
 859         /* Set the new input LED color to GPIOD. */
 860         gpio_data |= led_color;
 861
 862         /* Set the modified gpio_data values */
 863         if (ha->pio_address) {
 864                 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
 865         } else {
 866                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 867                 RD_REG_WORD(&reg->gpiod);
 868         }
 869
 870         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 871 }
 872
 873 int
 874 qla2x00_beacon_on(struct scsi_qla_host *ha)
 875 {
 876         uint16_t gpio_enable;
 877         uint16_t gpio_data;
 878         unsigned long flags;
 879         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 880
 881         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
 882         ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
 883
 884         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
 885                 qla_printk(KERN_WARNING, ha,
 886                     "Unable to update fw options (beacon on).\n");
 887                 return QLA_FUNCTION_FAILED;
 888         }
 889
 890         if (ha->pio_address)
 891                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
 892
 893         /* Turn off LEDs. */
 894         spin_lock_irqsave(&ha->hardware_lock, flags);
 895         if (ha->pio_address) {
 896                 gpio_enable = RD_REG_WORD_PIO(&reg->gpioe);
 897                 gpio_data = RD_REG_WORD_PIO(&reg->gpiod);
 898         } else {
 899                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 900                 gpio_data = RD_REG_WORD(&reg->gpiod);
 901         }
 902         gpio_enable |= GPIO_LED_MASK;
 903
 904         /* Set the modified gpio_enable values. */
 905         if (ha->pio_address) {
 906                 WRT_REG_WORD_PIO(&reg->gpioe, gpio_enable);
 907         } else {
 908                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 909                 RD_REG_WORD(&reg->gpioe);
 910         }
 911
 912         /* Clear out previously set LED colour. */
 913         gpio_data &= ~GPIO_LED_MASK;
 914         if (ha->pio_address) {
 915                 WRT_REG_WORD_PIO(&reg->gpiod, gpio_data);
 916         } else {
 917                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 918                 RD_REG_WORD(&reg->gpiod);
 919         }
 920         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 921
 922         /*
 923          * Let the per HBA timer kick off the blinking process based on
 924          * the following flags. No need to do anything else now.
 925          */
 926         ha->beacon_blink_led = 1;
 927         ha->beacon_color_state = 0;
 928
 929         return QLA_SUCCESS;
 930 }
 931
 932 int
 933 qla2x00_beacon_off(struct scsi_qla_host *ha)
 934 {
 935         int rval = QLA_SUCCESS;
 936
 937         ha->beacon_blink_led = 0;
 938
 939         /* Set the on flag so when it gets flipped it will be off. */
 940         if (IS_QLA2322(ha))
 941                 ha->beacon_color_state = QLA_LED_ALL_ON;
 942         else
 943                 ha->beacon_color_state = QLA_LED_GRN_ON;
 944
 945         ha->isp_ops->beacon_blink(ha);  /* This turns green LED off */
 946
 947         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
 948         ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
 949
 950         rval = qla2x00_set_fw_options(ha, ha->fw_options);
 951         if (rval != QLA_SUCCESS)
 952                 qla_printk(KERN_WARNING, ha,
 953                     "Unable to update fw options (beacon off).\n");
 954         return rval;
 955 }
 956
 957
 958 static inline void
 959 qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
 960 {
 961         /* Flip all colors. */
 962         if (ha->beacon_color_state == QLA_LED_ALL_ON) {
 963                 /* Turn off. */
 964                 ha->beacon_color_state = 0;
 965                 *pflags = 0;
 966         } else {
 967                 /* Turn on. */
 968                 ha->beacon_color_state = QLA_LED_ALL_ON;
 969                 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
 970         }
 971 }
 972
 973 void
 974 qla24xx_beacon_blink(struct scsi_qla_host *ha)
 975 {
 976         uint16_t led_color = 0;
 977         uint32_t gpio_data;
 978         unsigned long flags;
 979         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 980
 981         /* Save the Original GPIOD. */
 982         spin_lock_irqsave(&ha->hardware_lock, flags);
 983         gpio_data = RD_REG_DWORD(&reg->gpiod);
 984
 985         /* Enable the gpio_data reg for update. */
 986         gpio_data |= GPDX_LED_UPDATE_MASK;
 987
 988         WRT_REG_DWORD(&reg->gpiod, gpio_data);
 989         gpio_data = RD_REG_DWORD(&reg->gpiod);
 990
 991         /* Set the color bits. */
 992         qla24xx_flip_colors(ha, &led_color);
 993
 994         /* Clear out any previously set LED color. */
 995         gpio_data &= ~GPDX_LED_COLOR_MASK;
 996
 997         /* Set the new input LED color to GPIOD. */
 998         gpio_data |= led_color;
 999
1000         /* Set the modified gpio_data values. */
1001         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1002         gpio_data = RD_REG_DWORD(&reg->gpiod);
1003         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1004 }
1005
1006 int
1007 qla24xx_beacon_on(struct scsi_qla_host *ha)
1008 {
1009         uint32_t gpio_data;
1010         unsigned long flags;
1011         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1012
1013         if (ha->beacon_blink_led == 0) {
1014                 /* Enable firmware for update */
1015                 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
1016
1017                 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
1018                         return QLA_FUNCTION_FAILED;
1019
1020                 if (qla2x00_get_fw_options(ha, ha->fw_options) !=
1021                     QLA_SUCCESS) {
1022                         qla_printk(KERN_WARNING, ha,
1023                             "Unable to update fw options (beacon on).\n");
1024                         return QLA_FUNCTION_FAILED;
1025                 }
1026
1027                 spin_lock_irqsave(&ha->hardware_lock, flags);
1028                 gpio_data = RD_REG_DWORD(&reg->gpiod);
1029
1030                 /* Enable the gpio_data reg for update. */
1031                 gpio_data |= GPDX_LED_UPDATE_MASK;
1032                 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1033                 RD_REG_DWORD(&reg->gpiod);
1034
1035                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1036         }
1037
1038         /* So all colors blink together. */
1039         ha->beacon_color_state = 0;
1040
1041         /* Let the per HBA timer kick off the blinking process. */
1042         ha->beacon_blink_led = 1;
1043
1044         return QLA_SUCCESS;
1045 }
1046
1047 int
1048 qla24xx_beacon_off(struct scsi_qla_host *ha)
1049 {
1050         uint32_t gpio_data;
1051         unsigned long flags;
1052         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1053
1054         ha->beacon_blink_led = 0;
1055         ha->beacon_color_state = QLA_LED_ALL_ON;
1056
1057         ha->isp_ops->beacon_blink(ha);  /* Will flip to all off. */
1058
1059         /* Give control back to firmware. */
1060         spin_lock_irqsave(&ha->hardware_lock, flags);
1061         gpio_data = RD_REG_DWORD(&reg->gpiod);
1062
1063         /* Disable the gpio_data reg for update. */
1064         gpio_data &= ~GPDX_LED_UPDATE_MASK;
1065         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1066         RD_REG_DWORD(&reg->gpiod);
1067         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1068
1069         ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
1070
1071         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1072                 qla_printk(KERN_WARNING, ha,
1073                     "Unable to update fw options (beacon off).\n");
1074                 return QLA_FUNCTION_FAILED;
1075         }
1076
1077         if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1078                 qla_printk(KERN_WARNING, ha,
1079                     "Unable to get fw options (beacon off).\n");
1080                 return QLA_FUNCTION_FAILED;
1081         }
1082
1083         return QLA_SUCCESS;
1084 }
1085
1086
1087 /*
1088  * Flash support routines
1089  */
1090
1091 /**
1092  * qla2x00_flash_enable() - Setup flash for reading and writing.
1093  * @ha: HA context
1094  */
1095 static void
1096 qla2x00_flash_enable(scsi_qla_host_t *ha)
1097 {
1098         uint16_t data;
1099         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1100
1101         data = RD_REG_WORD(&reg->ctrl_status);
1102         data |= CSR_FLASH_ENABLE;
1103         WRT_REG_WORD(&reg->ctrl_status, data);
1104         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1105 }
1106
1107 /**
1108  * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1109  * @ha: HA context
1110  */
1111 static void
1112 qla2x00_flash_disable(scsi_qla_host_t *ha)
1113 {
1114         uint16_t data;
1115         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1116
1117         data = RD_REG_WORD(&reg->ctrl_status);
1118         data &= ~(CSR_FLASH_ENABLE);
1119         WRT_REG_WORD(&reg->ctrl_status, data);
1120         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1121 }
1122
1123 /**
1124  * qla2x00_read_flash_byte() - Reads a byte from flash
1125  * @ha: HA context
1126  * @addr: Address in flash to read
1127  *
1128  * A word is read from the chip, but, only the lower byte is valid.
1129  *
1130  * Returns the byte read from flash @addr.
1131  */
1132 static uint8_t
1133 qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
1134 {
1135         uint16_t data;
1136         uint16_t bank_select;
1137         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1138
1139         bank_select = RD_REG_WORD(&reg->ctrl_status);
1140
1141         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1142                 /* Specify 64K address range: */
1143                 /*  clear out Module Select and Flash Address bits [19:16]. */
1144                 bank_select &= ~0xf8;
1145                 bank_select |= addr >> 12 & 0xf0;
1146                 bank_select |= CSR_FLASH_64K_BANK;
1147                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1148                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1149
1150                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1151                 data = RD_REG_WORD(&reg->flash_data);
1152
1153                 return (uint8_t)data;
1154         }
1155
1156         /* Setup bit 16 of flash address. */
1157         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1158                 bank_select |= CSR_FLASH_64K_BANK;
1159                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1160                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1161         } else if (((addr & BIT_16) == 0) &&
1162             (bank_select & CSR_FLASH_64K_BANK)) {
1163                 bank_select &= ~(CSR_FLASH_64K_BANK);
1164                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1165                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1166         }
1167
1168         /* Always perform IO mapped accesses to the FLASH registers. */
1169         if (ha->pio_address) {
1170                 uint16_t data2;
1171
1172                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1173                 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1174                 do {
1175                         data = RD_REG_WORD_PIO(&reg->flash_data);
1176                         barrier();
1177                         cpu_relax();
1178                         data2 = RD_REG_WORD_PIO(&reg->flash_data);
1179                 } while (data != data2);
1180         } else {
1181                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1182                 data = qla2x00_debounce_register(&reg->flash_data);
1183         }
1184
1185         return (uint8_t)data;
1186 }
1187
1188 /**
1189  * qla2x00_write_flash_byte() - Write a byte to flash
1190  * @ha: HA context
1191  * @addr: Address in flash to write
1192  * @data: Data to write
1193  */
1194 static void
1195 qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
1196 {
1197         uint16_t bank_select;
1198         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1199
1200         bank_select = RD_REG_WORD(&reg->ctrl_status);
1201         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1202                 /* Specify 64K address range: */
1203                 /*  clear out Module Select and Flash Address bits [19:16]. */
1204                 bank_select &= ~0xf8;
1205                 bank_select |= addr >> 12 & 0xf0;
1206                 bank_select |= CSR_FLASH_64K_BANK;
1207                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1208                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1209
1210                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1211                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1212                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1213                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1214
1215                 return;
1216         }
1217
1218         /* Setup bit 16 of flash address. */
1219         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1220                 bank_select |= CSR_FLASH_64K_BANK;
1221                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1222                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1223         } else if (((addr & BIT_16) == 0) &&
1224             (bank_select & CSR_FLASH_64K_BANK)) {
1225                 bank_select &= ~(CSR_FLASH_64K_BANK);
1226                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1227                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1228         }
1229
1230         /* Always perform IO mapped accesses to the FLASH registers. */
1231         if (ha->pio_address) {
1232                 reg = (struct device_reg_2xxx __iomem *)ha->pio_address;
1233                 WRT_REG_WORD_PIO(&reg->flash_address, (uint16_t)addr);
1234                 WRT_REG_WORD_PIO(&reg->flash_data, (uint16_t)data);
1235         } else {
1236                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1237                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1238                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1239                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1240         }
1241 }
1242
1243 /**
1244  * qla2x00_poll_flash() - Polls flash for completion.
1245  * @ha: HA context
1246  * @addr: Address in flash to poll
1247  * @poll_data: Data to be polled
1248  * @man_id: Flash manufacturer ID
1249  * @flash_id: Flash ID
1250  *
1251  * This function polls the device until bit 7 of what is read matches data
1252  * bit 7 or until data bit 5 becomes a 1.  If that hapens, the flash ROM timed
1253  * out (a fatal error).  The flash book recommeds reading bit 7 again after
1254  * reading bit 5 as a 1.
1255  *
1256  * Returns 0 on success, else non-zero.
1257  */
1258 static int
1259 qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
1260     uint8_t man_id, uint8_t flash_id)
1261 {
1262         int status;
1263         uint8_t flash_data;
1264         uint32_t cnt;
1265
1266         status = 1;
1267
1268         /* Wait for 30 seconds for command to finish. */
1269         poll_data &= BIT_7;
1270         for (cnt = 3000000; cnt; cnt--) {
1271                 flash_data = qla2x00_read_flash_byte(ha, addr);
1272                 if ((flash_data & BIT_7) == poll_data) {
1273                         status = 0;
1274                         break;
1275                 }
1276
1277                 if (man_id != 0x40 && man_id != 0xda) {
1278                         if ((flash_data & BIT_5) && cnt > 2)
1279                                 cnt = 2;
1280                 }
1281                 udelay(10);
1282                 barrier();
1283                 cond_resched();
1284         }
1285         return status;
1286 }
1287
1288 /**
1289  * qla2x00_program_flash_address() - Programs a flash address
1290  * @ha: HA context
1291  * @addr: Address in flash to program
1292  * @data: Data to be written in flash
1293  * @man_id: Flash manufacturer ID
1294  * @flash_id: Flash ID
1295  *
1296  * Returns 0 on success, else non-zero.
1297  */
1298 static int
1299 qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
1300     uint8_t man_id, uint8_t flash_id)
1301 {
1302         /* Write Program Command Sequence. */
1303         if (IS_OEM_001(ha)) {
1304                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1305                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1306                 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
1307                 qla2x00_write_flash_byte(ha, addr, data);
1308         } else {
1309                 if (man_id == 0xda && flash_id == 0xc1) {
1310                         qla2x00_write_flash_byte(ha, addr, data);
1311                         if (addr & 0x7e)
1312                                 return 0;
1313                 } else {
1314                         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1315                         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1316                         qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
1317                         qla2x00_write_flash_byte(ha, addr, data);
1318                 }
1319         }
1320
1321         udelay(150);
1322
1323         /* Wait for write to complete. */
1324         return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
1325 }
1326
1327 /**
1328  * qla2x00_erase_flash() - Erase the flash.
1329  * @ha: HA context
1330  * @man_id: Flash manufacturer ID
1331  * @flash_id: Flash ID
1332  *
1333  * Returns 0 on success, else non-zero.
1334  */
1335 static int
1336 qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
1337 {
1338         /* Individual Sector Erase Command Sequence */
1339         if (IS_OEM_001(ha)) {
1340                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1341                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1342                 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
1343                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1344                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1345                 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
1346         } else {
1347                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1348                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1349                 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1350                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1351                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1352                 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
1353         }
1354
1355         udelay(150);
1356
1357         /* Wait for erase to complete. */
1358         return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
1359 }
1360
1361 /**
1362  * qla2x00_erase_flash_sector() - Erase a flash sector.
1363  * @ha: HA context
1364  * @addr: Flash sector to erase
1365  * @sec_mask: Sector address mask
1366  * @man_id: Flash manufacturer ID
1367  * @flash_id: Flash ID
1368  *
1369  * Returns 0 on success, else non-zero.
1370  */
1371 static int
1372 qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
1373     uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
1374 {
1375         /* Individual Sector Erase Command Sequence */
1376         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1377         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1378         qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1379         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1380         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1381         if (man_id == 0x1f && flash_id == 0x13)
1382                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
1383         else
1384                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
1385
1386         udelay(150);
1387
1388         /* Wait for erase to complete. */
1389         return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
1390 }
1391
1392 /**
1393  * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
1394  * @man_id: Flash manufacturer ID
1395  * @flash_id: Flash ID
1396  */
1397 static void
1398 qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
1399     uint8_t *flash_id)
1400 {
1401         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1402         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1403         qla2x00_write_flash_byte(ha, 0x5555, 0x90);
1404         *man_id = qla2x00_read_flash_byte(ha, 0x0000);
1405         *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
1406         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1407         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1408         qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
1409 }
1410
1411 static void
1412 qla2x00_read_flash_data(scsi_qla_host_t *ha, uint8_t *tmp_buf, uint32_t saddr,
1413         uint32_t length)
1414 {
1415         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1416         uint32_t midpoint, ilength;
1417         uint8_t data;
1418
1419         midpoint = length / 2;
1420
1421         WRT_REG_WORD(&reg->nvram, 0);
1422         RD_REG_WORD(&reg->nvram);
1423         for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
1424                 if (ilength == midpoint) {
1425                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1426                         RD_REG_WORD(&reg->nvram);
1427                 }
1428                 data = qla2x00_read_flash_byte(ha, saddr);
1429                 if (saddr % 100)
1430                         udelay(10);
1431                 *tmp_buf = data;
1432                 cond_resched();
1433         }
1434 }
1435
1436 static inline void
1437 qla2x00_suspend_hba(struct scsi_qla_host *ha)
1438 {
1439         int cnt;
1440         unsigned long flags;
1441         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1442
1443         /* Suspend HBA. */
1444         scsi_block_requests(ha->host);
1445         ha->isp_ops->disable_intrs(ha);
1446         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1447
1448         /* Pause RISC. */
1449         spin_lock_irqsave(&ha->hardware_lock, flags);
1450         WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
1451         RD_REG_WORD(&reg->hccr);
1452         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
1453                 for (cnt = 0; cnt < 30000; cnt++) {
1454                         if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
1455                                 break;
1456                         udelay(100);
1457                 }
1458         } else {
1459                 udelay(10);
1460         }
1461         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1462 }
1463
1464 static inline void
1465 qla2x00_resume_hba(struct scsi_qla_host *ha)
1466 {
1467         /* Resume HBA. */
1468         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1469         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1470         qla2xxx_wake_dpc(ha);
1471         qla2x00_wait_for_hba_online(ha);
1472         scsi_unblock_requests(ha->host);
1473 }
1474
1475 uint8_t *
1476 qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1477     uint32_t offset, uint32_t length)
1478 {
1479         uint32_t addr, midpoint;
1480         uint8_t *data;
1481         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1482
1483         /* Suspend HBA. */
1484         qla2x00_suspend_hba(ha);
1485
1486         /* Go with read. */
1487         midpoint = ha->optrom_size / 2;
1488
1489         qla2x00_flash_enable(ha);
1490         WRT_REG_WORD(&reg->nvram, 0);
1491         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
1492         for (addr = offset, data = buf; addr < length; addr++, data++) {
1493                 if (addr == midpoint) {
1494                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1495                         RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
1496                 }
1497
1498                 *data = qla2x00_read_flash_byte(ha, addr);
1499         }
1500         qla2x00_flash_disable(ha);
1501
1502         /* Resume HBA. */
1503         qla2x00_resume_hba(ha);
1504
1505         return buf;
1506 }
1507
1508 int
1509 qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1510     uint32_t offset, uint32_t length)
1511 {
1512
1513         int rval;
1514         uint8_t man_id, flash_id, sec_number, data;
1515         uint16_t wd;
1516         uint32_t addr, liter, sec_mask, rest_addr;
1517         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1518
1519         /* Suspend HBA. */
1520         qla2x00_suspend_hba(ha);
1521
1522         rval = QLA_SUCCESS;
1523         sec_number = 0;
1524
1525         /* Reset ISP chip. */
1526         WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
1527         pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
1528
1529         /* Go with write. */
1530         qla2x00_flash_enable(ha);
1531         do {    /* Loop once to provide quick error exit */
1532                 /* Structure of flash memory based on manufacturer */
1533                 if (IS_OEM_001(ha)) {
1534                         /* OEM variant with special flash part. */
1535                         man_id = flash_id = 0;
1536                         rest_addr = 0xffff;
1537                         sec_mask   = 0x10000;
1538                         goto update_flash;
1539                 }
1540                 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
1541                 switch (man_id) {
1542                 case 0x20: /* ST flash. */
1543                         if (flash_id == 0xd2 || flash_id == 0xe3) {
1544                                 /*
1545                                  * ST m29w008at part - 64kb sector size with
1546                                  * 32kb,8kb,8kb,16kb sectors at memory address
1547                                  * 0xf0000.
1548                                  */
1549                                 rest_addr = 0xffff;
1550                                 sec_mask = 0x10000;
1551                                 break;
1552                         }
1553                         /*
1554                          * ST m29w010b part - 16kb sector size
1555                          * Default to 16kb sectors
1556                          */
1557                         rest_addr = 0x3fff;
1558                         sec_mask = 0x1c000;
1559                         break;
1560                 case 0x40: /* Mostel flash. */
1561                         /* Mostel v29c51001 part - 512 byte sector size. */
1562                         rest_addr = 0x1ff;
1563                         sec_mask = 0x1fe00;
1564                         break;
1565                 case 0xbf: /* SST flash. */
1566                         /* SST39sf10 part - 4kb sector size. */
1567                         rest_addr = 0xfff;
1568                         sec_mask = 0x1f000;
1569                         break;
1570                 case 0xda: /* Winbond flash. */
1571                         /* Winbond W29EE011 part - 256 byte sector size. */
1572                         rest_addr = 0x7f;
1573                         sec_mask = 0x1ff80;
1574                         break;
1575                 case 0xc2: /* Macronix flash. */
1576                         /* 64k sector size. */
1577                         if (flash_id == 0x38 || flash_id == 0x4f) {
1578                                 rest_addr = 0xffff;
1579                                 sec_mask = 0x10000;
1580                                 break;
1581                         }
1582                         /* Fall through... */
1583
1584                 case 0x1f: /* Atmel flash. */
1585                         /* 512k sector size. */
1586                         if (flash_id == 0x13) {
1587                                 rest_addr = 0x7fffffff;
1588                                 sec_mask =   0x80000000;
1589                                 break;
1590                         }
1591                         /* Fall through... */
1592
1593                 case 0x01: /* AMD flash. */
1594                         if (flash_id == 0x38 || flash_id == 0x40 ||
1595                             flash_id == 0x4f) {
1596                                 /* Am29LV081 part - 64kb sector size. */
1597                                 /* Am29LV002BT part - 64kb sector size. */
1598                                 rest_addr = 0xffff;
1599                                 sec_mask = 0x10000;
1600                                 break;
1601                         } else if (flash_id == 0x3e) {
1602                                 /*
1603                                  * Am29LV008b part - 64kb sector size with
1604                                  * 32kb,8kb,8kb,16kb sector at memory address
1605                                  * h0xf0000.
1606                                  */
1607                                 rest_addr = 0xffff;
1608                                 sec_mask = 0x10000;
1609                                 break;
1610                         } else if (flash_id == 0x20 || flash_id == 0x6e) {
1611                                 /*
1612                                  * Am29LV010 part or AM29f010 - 16kb sector
1613                                  * size.
1614                                  */
1615                                 rest_addr = 0x3fff;
1616                                 sec_mask = 0x1c000;
1617                                 break;
1618                         } else if (flash_id == 0x6d) {
1619                                 /* Am29LV001 part - 8kb sector size. */
1620                                 rest_addr = 0x1fff;
1621                                 sec_mask = 0x1e000;
1622                                 break;
1623                         }
1624                 default:
1625                         /* Default to 16 kb sector size. */
1626                         rest_addr = 0x3fff;
1627                         sec_mask = 0x1c000;
1628                         break;
1629                 }
1630
1631 update_flash:
1632                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1633                         if (qla2x00_erase_flash(ha, man_id, flash_id)) {
1634                                 rval = QLA_FUNCTION_FAILED;
1635                                 break;
1636                         }
1637                 }
1638
1639                 for (addr = offset, liter = 0; liter < length; liter++,
1640                     addr++) {
1641                         data = buf[liter];
1642                         /* Are we at the beginning of a sector? */
1643                         if ((addr & rest_addr) == 0) {
1644                                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1645                                         if (addr >= 0x10000UL) {
1646                                                 if (((addr >> 12) & 0xf0) &&
1647                                                     ((man_id == 0x01 &&
1648                                                         flash_id == 0x3e) ||
1649                                                      (man_id == 0x20 &&
1650                                                          flash_id == 0xd2))) {
1651                                                         sec_number++;
1652                                                         if (sec_number == 1) {
1653                                                                 rest_addr =
1654                                                                     0x7fff;
1655                                                                 sec_mask =
1656                                                                     0x18000;
1657                                                         } else if (
1658                                                             sec_number == 2 ||
1659                                                             sec_number == 3) {
1660                                                                 rest_addr =
1661                                                                     0x1fff;
1662                                                                 sec_mask =
1663                                                                     0x1e000;
1664                                                         } else if (
1665                                                             sec_number == 4) {
1666                                                                 rest_addr =
1667                                                                     0x3fff;
1668                                                                 sec_mask =
1669                                                                     0x1c000;
1670                                                         }
1671                                                 }
1672                                         }
1673                                 } else if (addr == ha->optrom_size / 2) {
1674                                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1675                                         RD_REG_WORD(&reg->nvram);
1676                                 }
1677
1678                                 if (flash_id == 0xda && man_id == 0xc1) {
1679                                         qla2x00_write_flash_byte(ha, 0x5555,
1680                                             0xaa);
1681                                         qla2x00_write_flash_byte(ha, 0x2aaa,
1682                                             0x55);
1683                                         qla2x00_write_flash_byte(ha, 0x5555,
1684                                             0xa0);
1685                                 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
1686                                         /* Then erase it */
1687                                         if (qla2x00_erase_flash_sector(ha,
1688                                             addr, sec_mask, man_id,
1689                                             flash_id)) {
1690                                                 rval = QLA_FUNCTION_FAILED;
1691                                                 break;
1692                                         }
1693                                         if (man_id == 0x01 && flash_id == 0x6d)
1694                                                 sec_number++;
1695                                 }
1696                         }
1697
1698                         if (man_id == 0x01 && flash_id == 0x6d) {
1699                                 if (sec_number == 1 &&
1700                                     addr == (rest_addr - 1)) {
1701                                         rest_addr = 0x0fff;
1702                                         sec_mask   = 0x1f000;
1703                                 } else if (sec_number == 3 && (addr & 0x7ffe)) {
1704                                         rest_addr = 0x3fff;
1705                                         sec_mask   = 0x1c000;
1706                                 }
1707                         }
1708
1709                         if (qla2x00_program_flash_address(ha, addr, data,
1710                             man_id, flash_id)) {
1711                                 rval = QLA_FUNCTION_FAILED;
1712                                 break;
1713                         }
1714                         cond_resched();
1715                 }
1716         } while (0);
1717         qla2x00_flash_disable(ha);
1718
1719         /* Resume HBA. */
1720         qla2x00_resume_hba(ha);
1721
1722         return rval;
1723 }
1724
1725 uint8_t *
1726 qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1727     uint32_t offset, uint32_t length)
1728 {
1729         /* Suspend HBA. */
1730         scsi_block_requests(ha->host);
1731         ha->isp_ops->disable_intrs(ha);
1732         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1733
1734         /* Go with read. */
1735         qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
1736
1737         /* Resume HBA. */
1738         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1739         ha->isp_ops->enable_intrs(ha);
1740         scsi_unblock_requests(ha->host);
1741
1742         return buf;
1743 }
1744
1745 int
1746 qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1747     uint32_t offset, uint32_t length)
1748 {
1749         int rval;
1750
1751         /* Suspend HBA. */
1752         scsi_block_requests(ha->host);
1753         ha->isp_ops->disable_intrs(ha);
1754         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1755
1756         /* Go with write. */
1757         rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
1758             length >> 2);
1759
1760         /* Resume HBA -- RISC reset needed. */
1761         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1762         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1763         qla2xxx_wake_dpc(ha);
1764         qla2x00_wait_for_hba_online(ha);
1765         scsi_unblock_requests(ha->host);
1766
1767         return rval;
1768 }
1769
1770 /**
1771  * qla2x00_get_fcode_version() - Determine an FCODE image's version.
1772  * @ha: HA context
1773  * @pcids: Pointer to the FCODE PCI data structure
1774  *
1775  * The process of retrieving the FCODE version information is at best
1776  * described as interesting.
1777  *
1778  * Within the first 100h bytes of the image an ASCII string is present
1779  * which contains several pieces of information including the FCODE
1780  * version.  Unfortunately it seems the only reliable way to retrieve
1781  * the version is by scanning for another sentinel within the string,
1782  * the FCODE build date:
1783  *
1784  *      ... 2.00.02 10/17/02 ...
1785  *
1786  * Returns QLA_SUCCESS on successful retrieval of version.
1787  */
1788 static void
1789 qla2x00_get_fcode_version(scsi_qla_host_t *ha, uint32_t pcids)
1790 {
1791         int ret = QLA_FUNCTION_FAILED;
1792         uint32_t istart, iend, iter, vend;
1793         uint8_t do_next, rbyte, *vbyte;
1794
1795         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1796
1797         /* Skip the PCI data structure. */
1798         istart = pcids +
1799             ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
1800                 qla2x00_read_flash_byte(ha, pcids + 0x0A));
1801         iend = istart + 0x100;
1802         do {
1803                 /* Scan for the sentinel date string...eeewww. */
1804                 do_next = 0;
1805                 iter = istart;
1806                 while ((iter < iend) && !do_next) {
1807                         iter++;
1808                         if (qla2x00_read_flash_byte(ha, iter) == '/') {
1809                                 if (qla2x00_read_flash_byte(ha, iter + 2) ==
1810                                     '/')
1811                                         do_next++;
1812                                 else if (qla2x00_read_flash_byte(ha,
1813                                     iter + 3) == '/')
1814                                         do_next++;
1815                         }
1816                 }
1817                 if (!do_next)
1818                         break;
1819
1820                 /* Backtrack to previous ' ' (space). */
1821                 do_next = 0;
1822                 while ((iter > istart) && !do_next) {
1823                         iter--;
1824                         if (qla2x00_read_flash_byte(ha, iter) == ' ')
1825                                 do_next++;
1826                 }
1827                 if (!do_next)
1828                         break;
1829
1830                 /*
1831                  * Mark end of version tag, and find previous ' ' (space) or
1832                  * string length (recent FCODE images -- major hack ahead!!!).
1833                  */
1834                 vend = iter - 1;
1835                 do_next = 0;
1836                 while ((iter > istart) && !do_next) {
1837                         iter--;
1838                         rbyte = qla2x00_read_flash_byte(ha, iter);
1839                         if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
1840                                 do_next++;
1841                 }
1842                 if (!do_next)
1843                         break;
1844
1845                 /* Mark beginning of version tag, and copy data. */
1846                 iter++;
1847                 if ((vend - iter) &&
1848                     ((vend - iter) < sizeof(ha->fcode_revision))) {
1849                         vbyte = ha->fcode_revision;
1850                         while (iter <= vend) {
1851                                 *vbyte++ = qla2x00_read_flash_byte(ha, iter);
1852                                 iter++;
1853                         }
1854                         ret = QLA_SUCCESS;
1855                 }
1856         } while (0);
1857
1858         if (ret != QLA_SUCCESS)
1859                 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1860 }
1861
1862 int
1863 qla2x00_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
1864 {
1865         int ret = QLA_SUCCESS;
1866         uint8_t code_type, last_image;
1867         uint32_t pcihdr, pcids;
1868         uint8_t *dbyte;
1869         uint16_t *dcode;
1870
1871         if (!ha->pio_address || !mbuf)
1872                 return QLA_FUNCTION_FAILED;
1873
1874         memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
1875         memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
1876         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1877         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
1878
1879         qla2x00_flash_enable(ha);
1880
1881         /* Begin with first PCI expansion ROM header. */
1882         pcihdr = 0;
1883         last_image = 1;
1884         do {
1885                 /* Verify PCI expansion ROM header. */
1886                 if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
1887                     qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
1888                         /* No signature */
1889                         DEBUG2(printk("scsi(%ld): No matching ROM "
1890                             "signature.\n", ha->host_no));
1891                         ret = QLA_FUNCTION_FAILED;
1892                         break;
1893                 }
1894
1895                 /* Locate PCI data structure. */
1896                 pcids = pcihdr +
1897                     ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
1898                         qla2x00_read_flash_byte(ha, pcihdr + 0x18));
1899
1900                 /* Validate signature of PCI data structure. */
1901                 if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
1902                     qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
1903                     qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
1904                     qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
1905                         /* Incorrect header. */
1906                         DEBUG2(printk("%s(): PCI data struct not found "
1907                             "pcir_adr=%x.\n", __func__, pcids));
1908                         ret = QLA_FUNCTION_FAILED;
1909                         break;
1910                 }
1911
1912                 /* Read version */
1913                 code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
1914                 switch (code_type) {
1915                 case ROM_CODE_TYPE_BIOS:
1916                         /* Intel x86, PC-AT compatible. */
1917                         ha->bios_revision[0] =
1918                             qla2x00_read_flash_byte(ha, pcids + 0x12);
1919                         ha->bios_revision[1] =
1920                             qla2x00_read_flash_byte(ha, pcids + 0x13);
1921                         DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
1922                             ha->bios_revision[1], ha->bios_revision[0]));
1923                         break;
1924                 case ROM_CODE_TYPE_FCODE:
1925                         /* Open Firmware standard for PCI (FCode). */
1926                         /* Eeeewww... */
1927                         qla2x00_get_fcode_version(ha, pcids);
1928                         break;
1929                 case ROM_CODE_TYPE_EFI:
1930                         /* Extensible Firmware Interface (EFI). */
1931                         ha->efi_revision[0] =
1932                             qla2x00_read_flash_byte(ha, pcids + 0x12);
1933                         ha->efi_revision[1] =
1934                             qla2x00_read_flash_byte(ha, pcids + 0x13);
1935                         DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
1936                             ha->efi_revision[1], ha->efi_revision[0]));
1937                         break;
1938                 default:
1939                         DEBUG2(printk("%s(): Unrecognized code type %x at "
1940                             "pcids %x.\n", __func__, code_type, pcids));
1941                         break;
1942                 }
1943
1944                 last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
1945
1946                 /* Locate next PCI expansion ROM. */
1947                 pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
1948                     qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
1949         } while (!last_image);
1950
1951         if (IS_QLA2322(ha)) {
1952                 /* Read firmware image information. */
1953                 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
1954                 dbyte = mbuf;
1955                 memset(dbyte, 0, 8);
1956                 dcode = (uint16_t *)dbyte;
1957
1958                 qla2x00_read_flash_data(ha, dbyte, FA_RISC_CODE_ADDR * 4 + 10,
1959                     8);
1960                 DEBUG3(printk("%s(%ld): dumping fw ver from flash:\n",
1961                     __func__, ha->host_no));
1962                 DEBUG3(qla2x00_dump_buffer((uint8_t *)dbyte, 8));
1963
1964                 if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
1965                     dcode[2] == 0xffff && dcode[3] == 0xffff) ||
1966                     (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
1967                     dcode[3] == 0)) {
1968                         DEBUG2(printk("%s(): Unrecognized fw revision at "
1969                             "%x.\n", __func__, FA_RISC_CODE_ADDR * 4));
1970                 } else {
1971                         /* values are in big endian */
1972                         ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
1973                         ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
1974                         ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
1975                 }
1976         }
1977
1978         qla2x00_flash_disable(ha);
1979
1980         return ret;
1981 }
1982
1983 int
1984 qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
1985 {
1986         int ret = QLA_SUCCESS;
1987         uint32_t pcihdr, pcids;
1988         uint32_t *dcode;
1989         uint8_t *bcode;
1990         uint8_t code_type, last_image;
1991         int i;
1992
1993         if (!mbuf)
1994                 return QLA_FUNCTION_FAILED;
1995
1996         memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
1997         memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
1998         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1999         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2000
2001         dcode = mbuf;
2002
2003         /* Begin with first PCI expansion ROM header. */
2004         pcihdr = 0;
2005         last_image = 1;
2006         do {
2007                 /* Verify PCI expansion ROM header. */
2008                 qla24xx_read_flash_data(ha, dcode, pcihdr >> 2, 0x20);
2009                 bcode = mbuf + (pcihdr % 4);
2010                 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
2011                         /* No signature */
2012                         DEBUG2(printk("scsi(%ld): No matching ROM "
2013                             "signature.\n", ha->host_no));
2014                         ret = QLA_FUNCTION_FAILED;
2015                         break;
2016                 }
2017
2018                 /* Locate PCI data structure. */
2019                 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
2020
2021                 qla24xx_read_flash_data(ha, dcode, pcids >> 2, 0x20);
2022                 bcode = mbuf + (pcihdr % 4);
2023
2024                 /* Validate signature of PCI data structure. */
2025                 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
2026                     bcode[0x2] != 'I' || bcode[0x3] != 'R') {
2027                         /* Incorrect header. */
2028                         DEBUG2(printk("%s(): PCI data struct not found "
2029                             "pcir_adr=%x.\n", __func__, pcids));
2030                         ret = QLA_FUNCTION_FAILED;
2031                         break;
2032                 }
2033
2034                 /* Read version */
2035                 code_type = bcode[0x14];
2036                 switch (code_type) {
2037                 case ROM_CODE_TYPE_BIOS:
2038                         /* Intel x86, PC-AT compatible. */
2039                         ha->bios_revision[0] = bcode[0x12];
2040                         ha->bios_revision[1] = bcode[0x13];
2041                         DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
2042                             ha->bios_revision[1], ha->bios_revision[0]));
2043                         break;
2044                 case ROM_CODE_TYPE_FCODE:
2045                         /* Open Firmware standard for PCI (FCode). */
2046                         ha->fcode_revision[0] = bcode[0x12];
2047                         ha->fcode_revision[1] = bcode[0x13];
2048                         DEBUG3(printk("%s(): read FCODE %d.%d.\n", __func__,
2049                             ha->fcode_revision[1], ha->fcode_revision[0]));
2050                         break;
2051                 case ROM_CODE_TYPE_EFI:
2052                         /* Extensible Firmware Interface (EFI). */
2053                         ha->efi_revision[0] = bcode[0x12];
2054                         ha->efi_revision[1] = bcode[0x13];
2055                         DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
2056                             ha->efi_revision[1], ha->efi_revision[0]));
2057                         break;
2058                 default:
2059                         DEBUG2(printk("%s(): Unrecognized code type %x at "
2060                             "pcids %x.\n", __func__, code_type, pcids));
2061                         break;
2062                 }
2063
2064                 last_image = bcode[0x15] & BIT_7;
2065
2066                 /* Locate next PCI expansion ROM. */
2067                 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
2068         } while (!last_image);
2069
2070         /* Read firmware image information. */
2071         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2072         dcode = mbuf;
2073
2074         qla24xx_read_flash_data(ha, dcode, FA_RISC_CODE_ADDR + 4, 4);
2075         for (i = 0; i < 4; i++)
2076                 dcode[i] = be32_to_cpu(dcode[i]);
2077
2078         if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
2079             dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
2080             (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
2081             dcode[3] == 0)) {
2082                 DEBUG2(printk("%s(): Unrecognized fw version at %x.\n",
2083                     __func__, FA_RISC_CODE_ADDR));
2084         } else {
2085                 ha->fw_revision[0] = dcode[0];
2086                 ha->fw_revision[1] = dcode[1];
2087                 ha->fw_revision[2] = dcode[2];
2088                 ha->fw_revision[3] = dcode[3];
2089         }
2090
2091         return ret;
2092 }