drivers/scsi/qla2xxx/qla_sup.c

   1 /*
   2  * QLogic Fibre Channel HBA Driver
   3  * Copyright (c)  2003-2005 QLogic Corporation
   4  *
   5  * See LICENSE.qla2xxx for copyright and licensing details.
   6  */
   7 #include "qla_def.h"
   8
   9 #include <linux/delay.h>
  10 #include <linux/vmalloc.h>
  11 #include <asm/uaccess.h>
  12
  13 static uint16_t qla2x00_nvram_request(scsi_qla_host_t *, uint32_t);
  14 static void qla2x00_nv_deselect(scsi_qla_host_t *);
  15 static void qla2x00_nv_write(scsi_qla_host_t *, uint16_t);
  16
  17 /*
  18  * NVRAM support routines
  19  */
  20
  21 /**
  22  * qla2x00_lock_nvram_access() -
  23  * @ha: HA context
  24  */
  25 static void
  26 qla2x00_lock_nvram_access(scsi_qla_host_t *ha)
  27 {
  28         uint16_t data;
  29         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  30
  31         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  32                 data = RD_REG_WORD(&reg->nvram);
  33                 while (data & NVR_BUSY) {
  34                         udelay(100);
  35                         data = RD_REG_WORD(&reg->nvram);
  36                 }
  37
  38                 /* Lock resource */
  39                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  40                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  41                 udelay(5);
  42                 data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  43                 while ((data & BIT_0) == 0) {
  44                         /* Lock failed */
  45                         udelay(100);
  46                         WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0x1);
  47                         RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  48                         udelay(5);
  49                         data = RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  50                 }
  51         }
  52 }
  53
  54 /**
  55  * qla2x00_unlock_nvram_access() -
  56  * @ha: HA context
  57  */
  58 static void
  59 qla2x00_unlock_nvram_access(scsi_qla_host_t *ha)
  60 {
  61         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
  62
  63         if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
  64                 WRT_REG_WORD(&reg->u.isp2300.host_semaphore, 0);
  65                 RD_REG_WORD(&reg->u.isp2300.host_semaphore);
  66         }
  67 }
  68
  69 /**
  70  * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
  71  *      request routine to get the word from NVRAM.
  72  * @ha: HA context
  73  * @addr: Address in NVRAM to read
  74  *
  75  * Returns the word read from nvram @addr.
  76  */
  77 static uint16_t
  78 qla2x00_get_nvram_word(scsi_qla_host_t *ha, uint32_t addr)
  79 {
  80         uint16_t        data;
  81         uint32_t        nv_cmd;
  82
  83         nv_cmd = addr << 16;
  84         nv_cmd |= NV_READ_OP;
  85         data = qla2x00_nvram_request(ha, nv_cmd);
  86
  87         return (data);
  88 }
  89
  90 /**
  91  * qla2x00_write_nvram_word() - Write NVRAM data.
  92  * @ha: HA context
  93  * @addr: Address in NVRAM to write
  94  * @data: word to program
  95  */
  96 static void
  97 qla2x00_write_nvram_word(scsi_qla_host_t *ha, uint32_t addr, uint16_t data)
  98 {
  99         int count;
 100         uint16_t word;
 101         uint32_t nv_cmd, wait_cnt;
 102         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 103
 104         qla2x00_nv_write(ha, NVR_DATA_OUT);
 105         qla2x00_nv_write(ha, 0);
 106         qla2x00_nv_write(ha, 0);
 107
 108         for (word = 0; word < 8; word++)
 109                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 110
 111         qla2x00_nv_deselect(ha);
 112
 113         /* Write data */
 114         nv_cmd = (addr << 16) | NV_WRITE_OP;
 115         nv_cmd |= data;
 116         nv_cmd <<= 5;
 117         for (count = 0; count < 27; count++) {
 118                 if (nv_cmd & BIT_31)
 119                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 120                 else
 121                         qla2x00_nv_write(ha, 0);
 122
 123                 nv_cmd <<= 1;
 124         }
 125
 126         qla2x00_nv_deselect(ha);
 127
 128         /* Wait for NVRAM to become ready */
 129         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 130         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 131         wait_cnt = NVR_WAIT_CNT;
 132         do {
 133                 if (!--wait_cnt) {
 134                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 135                             __func__, ha->host_no));
 136                         break;
 137                 }
 138                 NVRAM_DELAY();
 139                 word = RD_REG_WORD(&reg->nvram);
 140         } while ((word & NVR_DATA_IN) == 0);
 141
 142         qla2x00_nv_deselect(ha);
 143
 144         /* Disable writes */
 145         qla2x00_nv_write(ha, NVR_DATA_OUT);
 146         for (count = 0; count < 10; count++)
 147                 qla2x00_nv_write(ha, 0);
 148
 149         qla2x00_nv_deselect(ha);
 150 }
 151
 152 static int
 153 qla2x00_write_nvram_word_tmo(scsi_qla_host_t *ha, uint32_t addr, uint16_t data,
 154     uint32_t tmo)
 155 {
 156         int ret, count;
 157         uint16_t word;
 158         uint32_t nv_cmd;
 159         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 160
 161         ret = QLA_SUCCESS;
 162
 163         qla2x00_nv_write(ha, NVR_DATA_OUT);
 164         qla2x00_nv_write(ha, 0);
 165         qla2x00_nv_write(ha, 0);
 166
 167         for (word = 0; word < 8; word++)
 168                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 169
 170         qla2x00_nv_deselect(ha);
 171
 172         /* Write data */
 173         nv_cmd = (addr << 16) | NV_WRITE_OP;
 174         nv_cmd |= data;
 175         nv_cmd <<= 5;
 176         for (count = 0; count < 27; count++) {
 177                 if (nv_cmd & BIT_31)
 178                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 179                 else
 180                         qla2x00_nv_write(ha, 0);
 181
 182                 nv_cmd <<= 1;
 183         }
 184
 185         qla2x00_nv_deselect(ha);
 186
 187         /* Wait for NVRAM to become ready */
 188         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 189         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 190         do {
 191                 NVRAM_DELAY();
 192                 word = RD_REG_WORD(&reg->nvram);
 193                 if (!--tmo) {
 194                         ret = QLA_FUNCTION_FAILED;
 195                         break;
 196                 }
 197         } while ((word & NVR_DATA_IN) == 0);
 198
 199         qla2x00_nv_deselect(ha);
 200
 201         /* Disable writes */
 202         qla2x00_nv_write(ha, NVR_DATA_OUT);
 203         for (count = 0; count < 10; count++)
 204                 qla2x00_nv_write(ha, 0);
 205
 206         qla2x00_nv_deselect(ha);
 207
 208         return ret;
 209 }
 210
 211 /**
 212  * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
 213  *      NVRAM.
 214  * @ha: HA context
 215  * @nv_cmd: NVRAM command
 216  *
 217  * Bit definitions for NVRAM command:
 218  *
 219  *      Bit 26     = start bit
 220  *      Bit 25, 24 = opcode
 221  *      Bit 23-16  = address
 222  *      Bit 15-0   = write data
 223  *
 224  * Returns the word read from nvram @addr.
 225  */
 226 static uint16_t
 227 qla2x00_nvram_request(scsi_qla_host_t *ha, uint32_t nv_cmd)
 228 {
 229         uint8_t         cnt;
 230         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 231         uint16_t        data = 0;
 232         uint16_t        reg_data;
 233
 234         /* Send command to NVRAM. */
 235         nv_cmd <<= 5;
 236         for (cnt = 0; cnt < 11; cnt++) {
 237                 if (nv_cmd & BIT_31)
 238                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 239                 else
 240                         qla2x00_nv_write(ha, 0);
 241                 nv_cmd <<= 1;
 242         }
 243
 244         /* Read data from NVRAM. */
 245         for (cnt = 0; cnt < 16; cnt++) {
 246                 WRT_REG_WORD(&reg->nvram, NVR_SELECT | NVR_CLOCK);
 247                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 248                 NVRAM_DELAY();
 249                 data <<= 1;
 250                 reg_data = RD_REG_WORD(&reg->nvram);
 251                 if (reg_data & NVR_DATA_IN)
 252                         data |= BIT_0;
 253                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 254                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 255                 NVRAM_DELAY();
 256         }
 257
 258         /* Deselect chip. */
 259         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 260         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 261         NVRAM_DELAY();
 262
 263         return (data);
 264 }
 265
 266 /**
 267  * qla2x00_nv_write() - Clean NVRAM operations.
 268  * @ha: HA context
 269  */
 270 static void
 271 qla2x00_nv_deselect(scsi_qla_host_t *ha)
 272 {
 273         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 274
 275         WRT_REG_WORD(&reg->nvram, NVR_DESELECT);
 276         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 277         NVRAM_DELAY();
 278 }
 279
 280 /**
 281  * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
 282  * @ha: HA context
 283  * @data: Serial interface selector
 284  */
 285 static void
 286 qla2x00_nv_write(scsi_qla_host_t *ha, uint16_t data)
 287 {
 288         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 289
 290         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 291         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 292         NVRAM_DELAY();
 293         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT| NVR_CLOCK |
 294             NVR_WRT_ENABLE);
 295         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 296         NVRAM_DELAY();
 297         WRT_REG_WORD(&reg->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
 298         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 299         NVRAM_DELAY();
 300 }
 301
 302 /**
 303  * qla2x00_clear_nvram_protection() -
 304  * @ha: HA context
 305  */
 306 static int
 307 qla2x00_clear_nvram_protection(scsi_qla_host_t *ha)
 308 {
 309         int ret, stat;
 310         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 311         uint32_t word, wait_cnt;
 312         uint16_t wprot, wprot_old;
 313
 314         /* Clear NVRAM write protection. */
 315         ret = QLA_FUNCTION_FAILED;
 316
 317         wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 318         stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
 319             __constant_cpu_to_le16(0x1234), 100000);
 320         wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
 321         if (stat != QLA_SUCCESS || wprot != 0x1234) {
 322                 /* Write enable. */
 323                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 324                 qla2x00_nv_write(ha, 0);
 325                 qla2x00_nv_write(ha, 0);
 326                 for (word = 0; word < 8; word++)
 327                         qla2x00_nv_write(ha, NVR_DATA_OUT);
 328
 329                 qla2x00_nv_deselect(ha);
 330
 331                 /* Enable protection register. */
 332                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 333                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 334                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 335                 for (word = 0; word < 8; word++)
 336                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 337
 338                 qla2x00_nv_deselect(ha);
 339
 340                 /* Clear protection register (ffff is cleared). */
 341                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 342                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 343                 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 344                 for (word = 0; word < 8; word++)
 345                         qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 346
 347                 qla2x00_nv_deselect(ha);
 348
 349                 /* Wait for NVRAM to become ready. */
 350                 WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 351                 RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
 352                 wait_cnt = NVR_WAIT_CNT;
 353                 do {
 354                         if (!--wait_cnt) {
 355                                 DEBUG9_10(printk("%s(%ld): NVRAM didn't go "
 356                                     "ready...\n", __func__,
 357                                     ha->host_no));
 358                                 break;
 359                         }
 360                         NVRAM_DELAY();
 361                         word = RD_REG_WORD(&reg->nvram);
 362                 } while ((word & NVR_DATA_IN) == 0);
 363
 364                 if (wait_cnt)
 365                         ret = QLA_SUCCESS;
 366         } else
 367                 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
 368
 369         return ret;
 370 }
 371
 372 static void
 373 qla2x00_set_nvram_protection(scsi_qla_host_t *ha, int stat)
 374 {
 375         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 376         uint32_t word, wait_cnt;
 377
 378         if (stat != QLA_SUCCESS)
 379                 return;
 380
 381         /* Set NVRAM write protection. */
 382         /* Write enable. */
 383         qla2x00_nv_write(ha, NVR_DATA_OUT);
 384         qla2x00_nv_write(ha, 0);
 385         qla2x00_nv_write(ha, 0);
 386         for (word = 0; word < 8; word++)
 387                 qla2x00_nv_write(ha, NVR_DATA_OUT);
 388
 389         qla2x00_nv_deselect(ha);
 390
 391         /* Enable protection register. */
 392         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 393         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 394         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 395         for (word = 0; word < 8; word++)
 396                 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
 397
 398         qla2x00_nv_deselect(ha);
 399
 400         /* Enable protection register. */
 401         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 402         qla2x00_nv_write(ha, NVR_PR_ENABLE);
 403         qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
 404         for (word = 0; word < 8; word++)
 405                 qla2x00_nv_write(ha, NVR_PR_ENABLE);
 406
 407         qla2x00_nv_deselect(ha);
 408
 409         /* Wait for NVRAM to become ready. */
 410         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
 411         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
 412         wait_cnt = NVR_WAIT_CNT;
 413         do {
 414                 if (!--wait_cnt) {
 415                         DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
 416                             __func__, ha->host_no));
 417                         break;
 418                 }
 419                 NVRAM_DELAY();
 420                 word = RD_REG_WORD(&reg->nvram);
 421         } while ((word & NVR_DATA_IN) == 0);
 422 }
 423
 424
 425 /*****************************************************************************/
 426 /* Flash Manipulation Routines                                               */
 427 /*****************************************************************************/
 428
 429 #define OPTROM_BURST_SIZE       0x1000
 430 #define OPTROM_BURST_DWORDS     (OPTROM_BURST_SIZE / 4)
 431
 432 static inline uint32_t
 433 flash_conf_to_access_addr(uint32_t faddr)
 434 {
 435         return FARX_ACCESS_FLASH_CONF | faddr;
 436 }
 437
 438 static inline uint32_t
 439 flash_data_to_access_addr(uint32_t faddr)
 440 {
 441         return FARX_ACCESS_FLASH_DATA | faddr;
 442 }
 443
 444 static inline uint32_t
 445 nvram_conf_to_access_addr(uint32_t naddr)
 446 {
 447         return FARX_ACCESS_NVRAM_CONF | naddr;
 448 }
 449
 450 static inline uint32_t
 451 nvram_data_to_access_addr(uint32_t naddr)
 452 {
 453         return FARX_ACCESS_NVRAM_DATA | naddr;
 454 }
 455
 456 static uint32_t
 457 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 458 {
 459         int rval;
 460         uint32_t cnt, data;
 461         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 462
 463         WRT_REG_DWORD(&reg->flash_addr, addr & ~FARX_DATA_FLAG);
 464         /* Wait for READ cycle to complete. */
 465         rval = QLA_SUCCESS;
 466         for (cnt = 3000;
 467             (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) == 0 &&
 468             rval == QLA_SUCCESS; cnt--) {
 469                 if (cnt)
 470                         udelay(10);
 471                 else
 472                         rval = QLA_FUNCTION_TIMEOUT;
 473                 cond_resched();
 474         }
 475
 476         /* TODO: What happens if we time out? */
 477         data = 0xDEADDEAD;
 478         if (rval == QLA_SUCCESS)
 479                 data = RD_REG_DWORD(&reg->flash_data);
 480
 481         return data;
 482 }
 483
 484 uint32_t *
 485 qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 486     uint32_t dwords)
 487 {
 488         uint32_t i;
 489
 490         /* Dword reads to flash. */
 491         for (i = 0; i < dwords; i++, faddr++)
 492                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 493                     flash_data_to_access_addr(faddr)));
 494
 495         return dwptr;
 496 }
 497
 498 static int
 499 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 500 {
 501         int rval;
 502         uint32_t cnt;
 503         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 504
 505         WRT_REG_DWORD(&reg->flash_data, data);
 506         RD_REG_DWORD(&reg->flash_data);         /* PCI Posting. */
 507         WRT_REG_DWORD(&reg->flash_addr, addr | FARX_DATA_FLAG);
 508         /* Wait for Write cycle to complete. */
 509         rval = QLA_SUCCESS;
 510         for (cnt = 500000; (RD_REG_DWORD(&reg->flash_addr) & FARX_DATA_FLAG) &&
 511             rval == QLA_SUCCESS; cnt--) {
 512                 if (cnt)
 513                         udelay(10);
 514                 else
 515                         rval = QLA_FUNCTION_TIMEOUT;
 516                 cond_resched();
 517         }
 518         return rval;
 519 }
 520
 521 static void
 522 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
 523     uint8_t *flash_id)
 524 {
 525         uint32_t ids;
 526
 527         ids = qla24xx_read_flash_dword(ha, flash_data_to_access_addr(0xd03ab));
 528         *man_id = LSB(ids);
 529         *flash_id = MSB(ids);
 530
 531         /* Check if man_id and flash_id are valid. */
 532         if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
 533                 /* Read information using 0x9f opcode
 534                  * Device ID, Mfg ID would be read in the format:
 535                  *   <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
 536                  * Example: ATMEL 0x00 01 45 1F
 537                  * Extract MFG and Dev ID from last two bytes.
 538                  */
 539                 ids = qla24xx_read_flash_dword(ha,
 540                     flash_data_to_access_addr(0xd009f));
 541                 *man_id = LSB(ids);
 542                 *flash_id = MSB(ids);
 543         }
 544 }
 545
 546 static int
 547 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 548     uint32_t dwords)
 549 {
 550         int ret;
 551         uint32_t liter, miter;
 552         uint32_t sec_mask, rest_addr, conf_addr;
 553         uint32_t fdata, findex, cnt;
 554         uint8_t man_id, flash_id;
 555         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 556         dma_addr_t optrom_dma;
 557         void *optrom = NULL;
 558         uint32_t *s, *d;
 559
 560         ret = QLA_SUCCESS;
 561
 562         /* Prepare burst-capable write on supported ISPs. */
 563         if (IS_QLA25XX(ha) && !(faddr & 0xfff) &&
 564             dwords > OPTROM_BURST_DWORDS) {
 565                 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
 566                     &optrom_dma, GFP_KERNEL);
 567                 if (!optrom) {
 568                         qla_printk(KERN_DEBUG, ha,
 569                             "Unable to allocate memory for optrom burst write "
 570                             "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
 571                 }
 572         }
 573
 574         qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
 575         DEBUG9(printk("%s(%ld): Flash man_id=%d flash_id=%d\n", __func__,
 576             ha->host_no, man_id, flash_id));
 577
 578         conf_addr = flash_conf_to_access_addr(0x03d8);
 579         switch (man_id) {
 580         case 0xbf: /* STT flash. */
 581                 if (flash_id == 0x8e) {
 582                         rest_addr = 0x3fff;
 583                         sec_mask = 0x7c000;
 584                 } else {
 585                         rest_addr = 0x1fff;
 586                         sec_mask = 0x7e000;
 587                 }
 588                 if (flash_id == 0x80)
 589                         conf_addr = flash_conf_to_access_addr(0x0352);
 590                 break;
 591         case 0x13: /* ST M25P80. */
 592                 rest_addr = 0x3fff;
 593                 sec_mask = 0x7c000;
 594                 break;
 595         case 0x1f: // Atmel 26DF081A
 596                 rest_addr = 0x3fff;
 597                 sec_mask = 0x7c000;
 598                 conf_addr = flash_conf_to_access_addr(0x0320);
 599                 break;
 600         default:
 601                 /* Default to 64 kb sector size. */
 602                 rest_addr = 0x3fff;
 603                 sec_mask = 0x7c000;
 604                 break;
 605         }
 606
 607         /* Enable flash write. */
 608         WRT_REG_DWORD(&reg->ctrl_status,
 609             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 610         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 611
 612         /* Disable flash write-protection. */
 613         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 614         /* Some flash parts need an additional zero-write to clear bits.*/
 615         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0);
 616
 617         for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
 618                 if (man_id == 0x1f) {
 619                         findex = faddr << 2;
 620                         fdata = findex & sec_mask;
 621                 } else {
 622                         findex = faddr;
 623                         fdata = (findex & sec_mask) << 2;
 624                 }
 625
 626                 /* Are we at the beginning of a sector? */
 627                 if ((findex & rest_addr) == 0) {
 628                         /* Do sector unprotect at 4K boundry for Atmel part. */
 629                         if (man_id == 0x1f)
 630                                 qla24xx_write_flash_dword(ha,
 631                                     flash_conf_to_access_addr(0x0339),
 632                                     (fdata & 0xff00) | ((fdata << 16) &
 633                                     0xff0000) | ((fdata >> 16) & 0xff));
 634                         ret = qla24xx_write_flash_dword(ha, conf_addr,
 635                             (fdata & 0xff00) |((fdata << 16) &
 636                             0xff0000) | ((fdata >> 16) & 0xff));
 637                         if (ret != QLA_SUCCESS) {
 638                                 DEBUG9(printk("%s(%ld) Unable to flash "
 639                                     "sector: address=%x.\n", __func__,
 640                                     ha->host_no, faddr));
 641                                 break;
 642                         }
 643                 }
 644
 645                 /* Go with burst-write. */
 646                 if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
 647                         /* Copy data to DMA'ble buffer. */
 648                         for (miter = 0, s = optrom, d = dwptr;
 649                             miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
 650                                 *s = cpu_to_le32(*d);
 651
 652                         ret = qla2x00_load_ram(ha, optrom_dma,
 653                             flash_data_to_access_addr(faddr),
 654                             OPTROM_BURST_DWORDS);
 655                         if (ret != QLA_SUCCESS) {
 656                                 qla_printk(KERN_WARNING, ha,
 657                                     "Unable to burst-write optrom segment "
 658                                     "(%x/%x/%llx).\n", ret,
 659                                     flash_data_to_access_addr(faddr),
 660                                     (unsigned long long)optrom_dma);
 661                                 qla_printk(KERN_WARNING, ha,
 662                                     "Reverting to slow-write.\n");
 663
 664                                 dma_free_coherent(&ha->pdev->dev,
 665                                     OPTROM_BURST_SIZE, optrom, optrom_dma);
 666                                 optrom = NULL;
 667                         } else {
 668                                 liter += OPTROM_BURST_DWORDS - 1;
 669                                 faddr += OPTROM_BURST_DWORDS - 1;
 670                                 dwptr += OPTROM_BURST_DWORDS - 1;
 671                                 continue;
 672                         }
 673                 }
 674
 675                 ret = qla24xx_write_flash_dword(ha,
 676                     flash_data_to_access_addr(faddr), cpu_to_le32(*dwptr));
 677                 if (ret != QLA_SUCCESS) {
 678                         DEBUG9(printk("%s(%ld) Unable to program flash "
 679                             "address=%x data=%x.\n", __func__,
 680                             ha->host_no, faddr, *dwptr));
 681                         break;
 682                 }
 683
 684                 /* Do sector protect at 4K boundry for Atmel part. */
 685                 if (man_id == 0x1f &&
 686                     ((faddr & rest_addr) == rest_addr))
 687                         qla24xx_write_flash_dword(ha,
 688                             flash_conf_to_access_addr(0x0336),
 689                             (fdata & 0xff00) | ((fdata << 16) &
 690                             0xff0000) | ((fdata >> 16) & 0xff));
 691         }
 692
 693         /* Enable flash write-protection and wait for completion. */
 694         qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
 695         for (cnt = 300; cnt &&
 696             qla24xx_read_flash_dword(ha,
 697                     flash_conf_to_access_addr(0x005)) & BIT_0;
 698             cnt--) {
 699                 udelay(10);
 700         }
 701
 702         /* Disable flash write. */
 703         WRT_REG_DWORD(&reg->ctrl_status,
 704             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 705         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 706
 707         if (optrom)
 708                 dma_free_coherent(&ha->pdev->dev,
 709                     OPTROM_BURST_SIZE, optrom, optrom_dma);
 710
 711         return ret;
 712 }
 713
 714 uint8_t *
 715 qla2x00_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 716     uint32_t bytes)
 717 {
 718         uint32_t i;
 719         uint16_t *wptr;
 720
 721         /* Word reads to NVRAM via registers. */
 722         wptr = (uint16_t *)buf;
 723         qla2x00_lock_nvram_access(ha);
 724         for (i = 0; i < bytes >> 1; i++, naddr++)
 725                 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
 726                     naddr));
 727         qla2x00_unlock_nvram_access(ha);
 728
 729         return buf;
 730 }
 731
 732 uint8_t *
 733 qla24xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 734     uint32_t bytes)
 735 {
 736         uint32_t i;
 737         uint32_t *dwptr;
 738
 739         /* Dword reads to flash. */
 740         dwptr = (uint32_t *)buf;
 741         for (i = 0; i < bytes >> 2; i++, naddr++)
 742                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 743                     nvram_data_to_access_addr(naddr)));
 744
 745         return buf;
 746 }
 747
 748 int
 749 qla2x00_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 750     uint32_t bytes)
 751 {
 752         int ret, stat;
 753         uint32_t i;
 754         uint16_t *wptr;
 755         unsigned long flags;
 756
 757         ret = QLA_SUCCESS;
 758
 759         spin_lock_irqsave(&ha->hardware_lock, flags);
 760         qla2x00_lock_nvram_access(ha);
 761
 762         /* Disable NVRAM write-protection. */
 763         stat = qla2x00_clear_nvram_protection(ha);
 764
 765         wptr = (uint16_t *)buf;
 766         for (i = 0; i < bytes >> 1; i++, naddr++) {
 767                 qla2x00_write_nvram_word(ha, naddr,
 768                     cpu_to_le16(*wptr));
 769                 wptr++;
 770         }
 771
 772         /* Enable NVRAM write-protection. */
 773         qla2x00_set_nvram_protection(ha, stat);
 774
 775         qla2x00_unlock_nvram_access(ha);
 776         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 777
 778         return ret;
 779 }
 780
 781 int
 782 qla24xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 783     uint32_t bytes)
 784 {
 785         int ret;
 786         uint32_t i;
 787         uint32_t *dwptr;
 788         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 789         unsigned long flags;
 790
 791         ret = QLA_SUCCESS;
 792
 793         spin_lock_irqsave(&ha->hardware_lock, flags);
 794         /* Enable flash write. */
 795         WRT_REG_DWORD(&reg->ctrl_status,
 796             RD_REG_DWORD(&reg->ctrl_status) | CSRX_FLASH_ENABLE);
 797         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 798
 799         /* Disable NVRAM write-protection. */
 800         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 801             0);
 802         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 803             0);
 804
 805         /* Dword writes to flash. */
 806         dwptr = (uint32_t *)buf;
 807         for (i = 0; i < bytes >> 2; i++, naddr++, dwptr++) {
 808                 ret = qla24xx_write_flash_dword(ha,
 809                     nvram_data_to_access_addr(naddr),
 810                     cpu_to_le32(*dwptr));
 811                 if (ret != QLA_SUCCESS) {
 812                         DEBUG9(printk("%s(%ld) Unable to program "
 813                             "nvram address=%x data=%x.\n", __func__,
 814                             ha->host_no, naddr, *dwptr));
 815                         break;
 816                 }
 817         }
 818
 819         /* Enable NVRAM write-protection. */
 820         qla24xx_write_flash_dword(ha, nvram_conf_to_access_addr(0x101),
 821             0x8c);
 822
 823         /* Disable flash write. */
 824         WRT_REG_DWORD(&reg->ctrl_status,
 825             RD_REG_DWORD(&reg->ctrl_status) & ~CSRX_FLASH_ENABLE);
 826         RD_REG_DWORD(&reg->ctrl_status);        /* PCI Posting. */
 827         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 828
 829         return ret;
 830 }
 831
 832 uint8_t *
 833 qla25xx_read_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 834     uint32_t bytes)
 835 {
 836         uint32_t i;
 837         uint32_t *dwptr;
 838
 839         /* Dword reads to flash. */
 840         dwptr = (uint32_t *)buf;
 841         for (i = 0; i < bytes >> 2; i++, naddr++)
 842                 dwptr[i] = cpu_to_le32(qla24xx_read_flash_dword(ha,
 843                     flash_data_to_access_addr(FA_VPD_NVRAM_ADDR | naddr)));
 844
 845         return buf;
 846 }
 847
 848 int
 849 qla25xx_write_nvram_data(scsi_qla_host_t *ha, uint8_t *buf, uint32_t naddr,
 850     uint32_t bytes)
 851 {
 852 #define RMW_BUFFER_SIZE (64 * 1024)
 853         uint8_t *dbuf;
 854
 855         dbuf = vmalloc(RMW_BUFFER_SIZE);
 856         if (!dbuf)
 857                 return QLA_MEMORY_ALLOC_FAILED;
 858         ha->isp_ops->read_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2,
 859             RMW_BUFFER_SIZE);
 860         memcpy(dbuf + (naddr << 2), buf, bytes);
 861         ha->isp_ops->write_optrom(ha, dbuf, FA_VPD_NVRAM_ADDR << 2,
 862             RMW_BUFFER_SIZE);
 863         vfree(dbuf);
 864
 865         return QLA_SUCCESS;
 866 }
 867
 868 static inline void
 869 qla2x00_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
 870 {
 871         if (IS_QLA2322(ha)) {
 872                 /* Flip all colors. */
 873                 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
 874                         /* Turn off. */
 875                         ha->beacon_color_state = 0;
 876                         *pflags = GPIO_LED_ALL_OFF;
 877                 } else {
 878                         /* Turn on. */
 879                         ha->beacon_color_state = QLA_LED_ALL_ON;
 880                         *pflags = GPIO_LED_RGA_ON;
 881                 }
 882         } else {
 883                 /* Flip green led only. */
 884                 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
 885                         /* Turn off. */
 886                         ha->beacon_color_state = 0;
 887                         *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
 888                 } else {
 889                         /* Turn on. */
 890                         ha->beacon_color_state = QLA_LED_GRN_ON;
 891                         *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
 892                 }
 893         }
 894 }
 895
 896 #define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
 897
 898 void
 899 qla2x00_beacon_blink(struct scsi_qla_host *ha)
 900 {
 901         uint16_t gpio_enable;
 902         uint16_t gpio_data;
 903         uint16_t led_color = 0;
 904         unsigned long flags;
 905         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 906
 907         spin_lock_irqsave(&ha->hardware_lock, flags);
 908
 909         /* Save the Original GPIOE. */
 910         if (ha->pio_address) {
 911                 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
 912                 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
 913         } else {
 914                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 915                 gpio_data = RD_REG_WORD(&reg->gpiod);
 916         }
 917
 918         /* Set the modified gpio_enable values */
 919         gpio_enable |= GPIO_LED_MASK;
 920
 921         if (ha->pio_address) {
 922                 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
 923         } else {
 924                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 925                 RD_REG_WORD(&reg->gpioe);
 926         }
 927
 928         qla2x00_flip_colors(ha, &led_color);
 929
 930         /* Clear out any previously set LED color. */
 931         gpio_data &= ~GPIO_LED_MASK;
 932
 933         /* Set the new input LED color to GPIOD. */
 934         gpio_data |= led_color;
 935
 936         /* Set the modified gpio_data values */
 937         if (ha->pio_address) {
 938                 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
 939         } else {
 940                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 941                 RD_REG_WORD(&reg->gpiod);
 942         }
 943
 944         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 945 }
 946
 947 int
 948 qla2x00_beacon_on(struct scsi_qla_host *ha)
 949 {
 950         uint16_t gpio_enable;
 951         uint16_t gpio_data;
 952         unsigned long flags;
 953         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 954
 955         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
 956         ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
 957
 958         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
 959                 qla_printk(KERN_WARNING, ha,
 960                     "Unable to update fw options (beacon on).\n");
 961                 return QLA_FUNCTION_FAILED;
 962         }
 963
 964         /* Turn off LEDs. */
 965         spin_lock_irqsave(&ha->hardware_lock, flags);
 966         if (ha->pio_address) {
 967                 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
 968                 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
 969         } else {
 970                 gpio_enable = RD_REG_WORD(&reg->gpioe);
 971                 gpio_data = RD_REG_WORD(&reg->gpiod);
 972         }
 973         gpio_enable |= GPIO_LED_MASK;
 974
 975         /* Set the modified gpio_enable values. */
 976         if (ha->pio_address) {
 977                 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
 978         } else {
 979                 WRT_REG_WORD(&reg->gpioe, gpio_enable);
 980                 RD_REG_WORD(&reg->gpioe);
 981         }
 982
 983         /* Clear out previously set LED colour. */
 984         gpio_data &= ~GPIO_LED_MASK;
 985         if (ha->pio_address) {
 986                 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
 987         } else {
 988                 WRT_REG_WORD(&reg->gpiod, gpio_data);
 989                 RD_REG_WORD(&reg->gpiod);
 990         }
 991         spin_unlock_irqrestore(&ha->hardware_lock, flags);
 992
 993         /*
 994          * Let the per HBA timer kick off the blinking process based on
 995          * the following flags. No need to do anything else now.
 996          */
 997         ha->beacon_blink_led = 1;
 998         ha->beacon_color_state = 0;
 999
1000         return QLA_SUCCESS;
1001 }
1002
1003 int
1004 qla2x00_beacon_off(struct scsi_qla_host *ha)
1005 {
1006         int rval = QLA_SUCCESS;
1007
1008         ha->beacon_blink_led = 0;
1009
1010         /* Set the on flag so when it gets flipped it will be off. */
1011         if (IS_QLA2322(ha))
1012                 ha->beacon_color_state = QLA_LED_ALL_ON;
1013         else
1014                 ha->beacon_color_state = QLA_LED_GRN_ON;
1015
1016         ha->isp_ops->beacon_blink(ha);  /* This turns green LED off */
1017
1018         ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1019         ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
1020
1021         rval = qla2x00_set_fw_options(ha, ha->fw_options);
1022         if (rval != QLA_SUCCESS)
1023                 qla_printk(KERN_WARNING, ha,
1024                     "Unable to update fw options (beacon off).\n");
1025         return rval;
1026 }
1027
1028
1029 static inline void
1030 qla24xx_flip_colors(scsi_qla_host_t *ha, uint16_t *pflags)
1031 {
1032         /* Flip all colors. */
1033         if (ha->beacon_color_state == QLA_LED_ALL_ON) {
1034                 /* Turn off. */
1035                 ha->beacon_color_state = 0;
1036                 *pflags = 0;
1037         } else {
1038                 /* Turn on. */
1039                 ha->beacon_color_state = QLA_LED_ALL_ON;
1040                 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
1041         }
1042 }
1043
1044 void
1045 qla24xx_beacon_blink(struct scsi_qla_host *ha)
1046 {
1047         uint16_t led_color = 0;
1048         uint32_t gpio_data;
1049         unsigned long flags;
1050         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1051
1052         /* Save the Original GPIOD. */
1053         spin_lock_irqsave(&ha->hardware_lock, flags);
1054         gpio_data = RD_REG_DWORD(&reg->gpiod);
1055
1056         /* Enable the gpio_data reg for update. */
1057         gpio_data |= GPDX_LED_UPDATE_MASK;
1058
1059         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1060         gpio_data = RD_REG_DWORD(&reg->gpiod);
1061
1062         /* Set the color bits. */
1063         qla24xx_flip_colors(ha, &led_color);
1064
1065         /* Clear out any previously set LED color. */
1066         gpio_data &= ~GPDX_LED_COLOR_MASK;
1067
1068         /* Set the new input LED color to GPIOD. */
1069         gpio_data |= led_color;
1070
1071         /* Set the modified gpio_data values. */
1072         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1073         gpio_data = RD_REG_DWORD(&reg->gpiod);
1074         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1075 }
1076
1077 int
1078 qla24xx_beacon_on(struct scsi_qla_host *ha)
1079 {
1080         uint32_t gpio_data;
1081         unsigned long flags;
1082         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1083
1084         if (ha->beacon_blink_led == 0) {
1085                 /* Enable firmware for update */
1086                 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
1087
1088                 if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS)
1089                         return QLA_FUNCTION_FAILED;
1090
1091                 if (qla2x00_get_fw_options(ha, ha->fw_options) !=
1092                     QLA_SUCCESS) {
1093                         qla_printk(KERN_WARNING, ha,
1094                             "Unable to update fw options (beacon on).\n");
1095                         return QLA_FUNCTION_FAILED;
1096                 }
1097
1098                 spin_lock_irqsave(&ha->hardware_lock, flags);
1099                 gpio_data = RD_REG_DWORD(&reg->gpiod);
1100
1101                 /* Enable the gpio_data reg for update. */
1102                 gpio_data |= GPDX_LED_UPDATE_MASK;
1103                 WRT_REG_DWORD(&reg->gpiod, gpio_data);
1104                 RD_REG_DWORD(&reg->gpiod);
1105
1106                 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1107         }
1108
1109         /* So all colors blink together. */
1110         ha->beacon_color_state = 0;
1111
1112         /* Let the per HBA timer kick off the blinking process. */
1113         ha->beacon_blink_led = 1;
1114
1115         return QLA_SUCCESS;
1116 }
1117
1118 int
1119 qla24xx_beacon_off(struct scsi_qla_host *ha)
1120 {
1121         uint32_t gpio_data;
1122         unsigned long flags;
1123         struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1124
1125         ha->beacon_blink_led = 0;
1126         ha->beacon_color_state = QLA_LED_ALL_ON;
1127
1128         ha->isp_ops->beacon_blink(ha);  /* Will flip to all off. */
1129
1130         /* Give control back to firmware. */
1131         spin_lock_irqsave(&ha->hardware_lock, flags);
1132         gpio_data = RD_REG_DWORD(&reg->gpiod);
1133
1134         /* Disable the gpio_data reg for update. */
1135         gpio_data &= ~GPDX_LED_UPDATE_MASK;
1136         WRT_REG_DWORD(&reg->gpiod, gpio_data);
1137         RD_REG_DWORD(&reg->gpiod);
1138         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1139
1140         ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
1141
1142         if (qla2x00_set_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1143                 qla_printk(KERN_WARNING, ha,
1144                     "Unable to update fw options (beacon off).\n");
1145                 return QLA_FUNCTION_FAILED;
1146         }
1147
1148         if (qla2x00_get_fw_options(ha, ha->fw_options) != QLA_SUCCESS) {
1149                 qla_printk(KERN_WARNING, ha,
1150                     "Unable to get fw options (beacon off).\n");
1151                 return QLA_FUNCTION_FAILED;
1152         }
1153
1154         return QLA_SUCCESS;
1155 }
1156
1157
1158 /*
1159  * Flash support routines
1160  */
1161
1162 /**
1163  * qla2x00_flash_enable() - Setup flash for reading and writing.
1164  * @ha: HA context
1165  */
1166 static void
1167 qla2x00_flash_enable(scsi_qla_host_t *ha)
1168 {
1169         uint16_t data;
1170         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1171
1172         data = RD_REG_WORD(&reg->ctrl_status);
1173         data |= CSR_FLASH_ENABLE;
1174         WRT_REG_WORD(&reg->ctrl_status, data);
1175         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1176 }
1177
1178 /**
1179  * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1180  * @ha: HA context
1181  */
1182 static void
1183 qla2x00_flash_disable(scsi_qla_host_t *ha)
1184 {
1185         uint16_t data;
1186         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1187
1188         data = RD_REG_WORD(&reg->ctrl_status);
1189         data &= ~(CSR_FLASH_ENABLE);
1190         WRT_REG_WORD(&reg->ctrl_status, data);
1191         RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1192 }
1193
1194 /**
1195  * qla2x00_read_flash_byte() - Reads a byte from flash
1196  * @ha: HA context
1197  * @addr: Address in flash to read
1198  *
1199  * A word is read from the chip, but, only the lower byte is valid.
1200  *
1201  * Returns the byte read from flash @addr.
1202  */
1203 static uint8_t
1204 qla2x00_read_flash_byte(scsi_qla_host_t *ha, uint32_t addr)
1205 {
1206         uint16_t data;
1207         uint16_t bank_select;
1208         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1209
1210         bank_select = RD_REG_WORD(&reg->ctrl_status);
1211
1212         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1213                 /* Specify 64K address range: */
1214                 /*  clear out Module Select and Flash Address bits [19:16]. */
1215                 bank_select &= ~0xf8;
1216                 bank_select |= addr >> 12 & 0xf0;
1217                 bank_select |= CSR_FLASH_64K_BANK;
1218                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1219                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1220
1221                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1222                 data = RD_REG_WORD(&reg->flash_data);
1223
1224                 return (uint8_t)data;
1225         }
1226
1227         /* Setup bit 16 of flash address. */
1228         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1229                 bank_select |= CSR_FLASH_64K_BANK;
1230                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1231                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1232         } else if (((addr & BIT_16) == 0) &&
1233             (bank_select & CSR_FLASH_64K_BANK)) {
1234                 bank_select &= ~(CSR_FLASH_64K_BANK);
1235                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1236                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1237         }
1238
1239         /* Always perform IO mapped accesses to the FLASH registers. */
1240         if (ha->pio_address) {
1241                 uint16_t data2;
1242
1243                 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
1244                 do {
1245                         data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
1246                         barrier();
1247                         cpu_relax();
1248                         data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
1249                 } while (data != data2);
1250         } else {
1251                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1252                 data = qla2x00_debounce_register(&reg->flash_data);
1253         }
1254
1255         return (uint8_t)data;
1256 }
1257
1258 /**
1259  * qla2x00_write_flash_byte() - Write a byte to flash
1260  * @ha: HA context
1261  * @addr: Address in flash to write
1262  * @data: Data to write
1263  */
1264 static void
1265 qla2x00_write_flash_byte(scsi_qla_host_t *ha, uint32_t addr, uint8_t data)
1266 {
1267         uint16_t bank_select;
1268         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1269
1270         bank_select = RD_REG_WORD(&reg->ctrl_status);
1271         if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1272                 /* Specify 64K address range: */
1273                 /*  clear out Module Select and Flash Address bits [19:16]. */
1274                 bank_select &= ~0xf8;
1275                 bank_select |= addr >> 12 & 0xf0;
1276                 bank_select |= CSR_FLASH_64K_BANK;
1277                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1278                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1279
1280                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1281                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1282                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1283                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1284
1285                 return;
1286         }
1287
1288         /* Setup bit 16 of flash address. */
1289         if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
1290                 bank_select |= CSR_FLASH_64K_BANK;
1291                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1292                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1293         } else if (((addr & BIT_16) == 0) &&
1294             (bank_select & CSR_FLASH_64K_BANK)) {
1295                 bank_select &= ~(CSR_FLASH_64K_BANK);
1296                 WRT_REG_WORD(&reg->ctrl_status, bank_select);
1297                 RD_REG_WORD(&reg->ctrl_status); /* PCI Posting. */
1298         }
1299
1300         /* Always perform IO mapped accesses to the FLASH registers. */
1301         if (ha->pio_address) {
1302                 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
1303                 WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
1304         } else {
1305                 WRT_REG_WORD(&reg->flash_address, (uint16_t)addr);
1306                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1307                 WRT_REG_WORD(&reg->flash_data, (uint16_t)data);
1308                 RD_REG_WORD(&reg->ctrl_status);         /* PCI Posting. */
1309         }
1310 }
1311
1312 /**
1313  * qla2x00_poll_flash() - Polls flash for completion.
1314  * @ha: HA context
1315  * @addr: Address in flash to poll
1316  * @poll_data: Data to be polled
1317  * @man_id: Flash manufacturer ID
1318  * @flash_id: Flash ID
1319  *
1320  * This function polls the device until bit 7 of what is read matches data
1321  * bit 7 or until data bit 5 becomes a 1.  If that hapens, the flash ROM timed
1322  * out (a fatal error).  The flash book recommeds reading bit 7 again after
1323  * reading bit 5 as a 1.
1324  *
1325  * Returns 0 on success, else non-zero.
1326  */
1327 static int
1328 qla2x00_poll_flash(scsi_qla_host_t *ha, uint32_t addr, uint8_t poll_data,
1329     uint8_t man_id, uint8_t flash_id)
1330 {
1331         int status;
1332         uint8_t flash_data;
1333         uint32_t cnt;
1334
1335         status = 1;
1336
1337         /* Wait for 30 seconds for command to finish. */
1338         poll_data &= BIT_7;
1339         for (cnt = 3000000; cnt; cnt--) {
1340                 flash_data = qla2x00_read_flash_byte(ha, addr);
1341                 if ((flash_data & BIT_7) == poll_data) {
1342                         status = 0;
1343                         break;
1344                 }
1345
1346                 if (man_id != 0x40 && man_id != 0xda) {
1347                         if ((flash_data & BIT_5) && cnt > 2)
1348                                 cnt = 2;
1349                 }
1350                 udelay(10);
1351                 barrier();
1352                 cond_resched();
1353         }
1354         return status;
1355 }
1356
1357 /**
1358  * qla2x00_program_flash_address() - Programs a flash address
1359  * @ha: HA context
1360  * @addr: Address in flash to program
1361  * @data: Data to be written in flash
1362  * @man_id: Flash manufacturer ID
1363  * @flash_id: Flash ID
1364  *
1365  * Returns 0 on success, else non-zero.
1366  */
1367 static int
1368 qla2x00_program_flash_address(scsi_qla_host_t *ha, uint32_t addr, uint8_t data,
1369     uint8_t man_id, uint8_t flash_id)
1370 {
1371         /* Write Program Command Sequence. */
1372         if (IS_OEM_001(ha)) {
1373                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1374                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1375                 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
1376                 qla2x00_write_flash_byte(ha, addr, data);
1377         } else {
1378                 if (man_id == 0xda && flash_id == 0xc1) {
1379                         qla2x00_write_flash_byte(ha, addr, data);
1380                         if (addr & 0x7e)
1381                                 return 0;
1382                 } else {
1383                         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1384                         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1385                         qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
1386                         qla2x00_write_flash_byte(ha, addr, data);
1387                 }
1388         }
1389
1390         udelay(150);
1391
1392         /* Wait for write to complete. */
1393         return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
1394 }
1395
1396 /**
1397  * qla2x00_erase_flash() - Erase the flash.
1398  * @ha: HA context
1399  * @man_id: Flash manufacturer ID
1400  * @flash_id: Flash ID
1401  *
1402  * Returns 0 on success, else non-zero.
1403  */
1404 static int
1405 qla2x00_erase_flash(scsi_qla_host_t *ha, uint8_t man_id, uint8_t flash_id)
1406 {
1407         /* Individual Sector Erase Command Sequence */
1408         if (IS_OEM_001(ha)) {
1409                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1410                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1411                 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
1412                 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
1413                 qla2x00_write_flash_byte(ha, 0x555, 0x55);
1414                 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
1415         } else {
1416                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1417                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1418                 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1419                 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1420                 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1421                 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
1422         }
1423
1424         udelay(150);
1425
1426         /* Wait for erase to complete. */
1427         return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
1428 }
1429
1430 /**
1431  * qla2x00_erase_flash_sector() - Erase a flash sector.
1432  * @ha: HA context
1433  * @addr: Flash sector to erase
1434  * @sec_mask: Sector address mask
1435  * @man_id: Flash manufacturer ID
1436  * @flash_id: Flash ID
1437  *
1438  * Returns 0 on success, else non-zero.
1439  */
1440 static int
1441 qla2x00_erase_flash_sector(scsi_qla_host_t *ha, uint32_t addr,
1442     uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
1443 {
1444         /* Individual Sector Erase Command Sequence */
1445         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1446         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1447         qla2x00_write_flash_byte(ha, 0x5555, 0x80);
1448         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1449         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1450         if (man_id == 0x1f && flash_id == 0x13)
1451                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
1452         else
1453                 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
1454
1455         udelay(150);
1456
1457         /* Wait for erase to complete. */
1458         return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
1459 }
1460
1461 /**
1462  * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
1463  * @man_id: Flash manufacturer ID
1464  * @flash_id: Flash ID
1465  */
1466 static void
1467 qla2x00_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
1468     uint8_t *flash_id)
1469 {
1470         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1471         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1472         qla2x00_write_flash_byte(ha, 0x5555, 0x90);
1473         *man_id = qla2x00_read_flash_byte(ha, 0x0000);
1474         *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
1475         qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
1476         qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
1477         qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
1478 }
1479
1480 static void
1481 qla2x00_read_flash_data(scsi_qla_host_t *ha, uint8_t *tmp_buf, uint32_t saddr,
1482         uint32_t length)
1483 {
1484         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1485         uint32_t midpoint, ilength;
1486         uint8_t data;
1487
1488         midpoint = length / 2;
1489
1490         WRT_REG_WORD(&reg->nvram, 0);
1491         RD_REG_WORD(&reg->nvram);
1492         for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
1493                 if (ilength == midpoint) {
1494                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1495                         RD_REG_WORD(&reg->nvram);
1496                 }
1497                 data = qla2x00_read_flash_byte(ha, saddr);
1498                 if (saddr % 100)
1499                         udelay(10);
1500                 *tmp_buf = data;
1501                 cond_resched();
1502         }
1503 }
1504
1505 static inline void
1506 qla2x00_suspend_hba(struct scsi_qla_host *ha)
1507 {
1508         int cnt;
1509         unsigned long flags;
1510         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1511
1512         /* Suspend HBA. */
1513         scsi_block_requests(ha->host);
1514         ha->isp_ops->disable_intrs(ha);
1515         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1516
1517         /* Pause RISC. */
1518         spin_lock_irqsave(&ha->hardware_lock, flags);
1519         WRT_REG_WORD(&reg->hccr, HCCR_PAUSE_RISC);
1520         RD_REG_WORD(&reg->hccr);
1521         if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
1522                 for (cnt = 0; cnt < 30000; cnt++) {
1523                         if ((RD_REG_WORD(&reg->hccr) & HCCR_RISC_PAUSE) != 0)
1524                                 break;
1525                         udelay(100);
1526                 }
1527         } else {
1528                 udelay(10);
1529         }
1530         spin_unlock_irqrestore(&ha->hardware_lock, flags);
1531 }
1532
1533 static inline void
1534 qla2x00_resume_hba(struct scsi_qla_host *ha)
1535 {
1536         /* Resume HBA. */
1537         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1538         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1539         qla2xxx_wake_dpc(ha);
1540         qla2x00_wait_for_hba_online(ha);
1541         scsi_unblock_requests(ha->host);
1542 }
1543
1544 uint8_t *
1545 qla2x00_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1546     uint32_t offset, uint32_t length)
1547 {
1548         uint32_t addr, midpoint;
1549         uint8_t *data;
1550         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1551
1552         /* Suspend HBA. */
1553         qla2x00_suspend_hba(ha);
1554
1555         /* Go with read. */
1556         midpoint = ha->optrom_size / 2;
1557
1558         qla2x00_flash_enable(ha);
1559         WRT_REG_WORD(&reg->nvram, 0);
1560         RD_REG_WORD(&reg->nvram);               /* PCI Posting. */
1561         for (addr = offset, data = buf; addr < length; addr++, data++) {
1562                 if (addr == midpoint) {
1563                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1564                         RD_REG_WORD(&reg->nvram);       /* PCI Posting. */
1565                 }
1566
1567                 *data = qla2x00_read_flash_byte(ha, addr);
1568         }
1569         qla2x00_flash_disable(ha);
1570
1571         /* Resume HBA. */
1572         qla2x00_resume_hba(ha);
1573
1574         return buf;
1575 }
1576
1577 int
1578 qla2x00_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1579     uint32_t offset, uint32_t length)
1580 {
1581
1582         int rval;
1583         uint8_t man_id, flash_id, sec_number, data;
1584         uint16_t wd;
1585         uint32_t addr, liter, sec_mask, rest_addr;
1586         struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1587
1588         /* Suspend HBA. */
1589         qla2x00_suspend_hba(ha);
1590
1591         rval = QLA_SUCCESS;
1592         sec_number = 0;
1593
1594         /* Reset ISP chip. */
1595         WRT_REG_WORD(&reg->ctrl_status, CSR_ISP_SOFT_RESET);
1596         pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
1597
1598         /* Go with write. */
1599         qla2x00_flash_enable(ha);
1600         do {    /* Loop once to provide quick error exit */
1601                 /* Structure of flash memory based on manufacturer */
1602                 if (IS_OEM_001(ha)) {
1603                         /* OEM variant with special flash part. */
1604                         man_id = flash_id = 0;
1605                         rest_addr = 0xffff;
1606                         sec_mask   = 0x10000;
1607                         goto update_flash;
1608                 }
1609                 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
1610                 switch (man_id) {
1611                 case 0x20: /* ST flash. */
1612                         if (flash_id == 0xd2 || flash_id == 0xe3) {
1613                                 /*
1614                                  * ST m29w008at part - 64kb sector size with
1615                                  * 32kb,8kb,8kb,16kb sectors at memory address
1616                                  * 0xf0000.
1617                                  */
1618                                 rest_addr = 0xffff;
1619                                 sec_mask = 0x10000;
1620                                 break;
1621                         }
1622                         /*
1623                          * ST m29w010b part - 16kb sector size
1624                          * Default to 16kb sectors
1625                          */
1626                         rest_addr = 0x3fff;
1627                         sec_mask = 0x1c000;
1628                         break;
1629                 case 0x40: /* Mostel flash. */
1630                         /* Mostel v29c51001 part - 512 byte sector size. */
1631                         rest_addr = 0x1ff;
1632                         sec_mask = 0x1fe00;
1633                         break;
1634                 case 0xbf: /* SST flash. */
1635                         /* SST39sf10 part - 4kb sector size. */
1636                         rest_addr = 0xfff;
1637                         sec_mask = 0x1f000;
1638                         break;
1639                 case 0xda: /* Winbond flash. */
1640                         /* Winbond W29EE011 part - 256 byte sector size. */
1641                         rest_addr = 0x7f;
1642                         sec_mask = 0x1ff80;
1643                         break;
1644                 case 0xc2: /* Macronix flash. */
1645                         /* 64k sector size. */
1646                         if (flash_id == 0x38 || flash_id == 0x4f) {
1647                                 rest_addr = 0xffff;
1648                                 sec_mask = 0x10000;
1649                                 break;
1650                         }
1651                         /* Fall through... */
1652
1653                 case 0x1f: /* Atmel flash. */
1654                         /* 512k sector size. */
1655                         if (flash_id == 0x13) {
1656                                 rest_addr = 0x7fffffff;
1657                                 sec_mask =   0x80000000;
1658                                 break;
1659                         }
1660                         /* Fall through... */
1661
1662                 case 0x01: /* AMD flash. */
1663                         if (flash_id == 0x38 || flash_id == 0x40 ||
1664                             flash_id == 0x4f) {
1665                                 /* Am29LV081 part - 64kb sector size. */
1666                                 /* Am29LV002BT part - 64kb sector size. */
1667                                 rest_addr = 0xffff;
1668                                 sec_mask = 0x10000;
1669                                 break;
1670                         } else if (flash_id == 0x3e) {
1671                                 /*
1672                                  * Am29LV008b part - 64kb sector size with
1673                                  * 32kb,8kb,8kb,16kb sector at memory address
1674                                  * h0xf0000.
1675                                  */
1676                                 rest_addr = 0xffff;
1677                                 sec_mask = 0x10000;
1678                                 break;
1679                         } else if (flash_id == 0x20 || flash_id == 0x6e) {
1680                                 /*
1681                                  * Am29LV010 part or AM29f010 - 16kb sector
1682                                  * size.
1683                                  */
1684                                 rest_addr = 0x3fff;
1685                                 sec_mask = 0x1c000;
1686                                 break;
1687                         } else if (flash_id == 0x6d) {
1688                                 /* Am29LV001 part - 8kb sector size. */
1689                                 rest_addr = 0x1fff;
1690                                 sec_mask = 0x1e000;
1691                                 break;
1692                         }
1693                 default:
1694                         /* Default to 16 kb sector size. */
1695                         rest_addr = 0x3fff;
1696                         sec_mask = 0x1c000;
1697                         break;
1698                 }
1699
1700 update_flash:
1701                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1702                         if (qla2x00_erase_flash(ha, man_id, flash_id)) {
1703                                 rval = QLA_FUNCTION_FAILED;
1704                                 break;
1705                         }
1706                 }
1707
1708                 for (addr = offset, liter = 0; liter < length; liter++,
1709                     addr++) {
1710                         data = buf[liter];
1711                         /* Are we at the beginning of a sector? */
1712                         if ((addr & rest_addr) == 0) {
1713                                 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
1714                                         if (addr >= 0x10000UL) {
1715                                                 if (((addr >> 12) & 0xf0) &&
1716                                                     ((man_id == 0x01 &&
1717                                                         flash_id == 0x3e) ||
1718                                                      (man_id == 0x20 &&
1719                                                          flash_id == 0xd2))) {
1720                                                         sec_number++;
1721                                                         if (sec_number == 1) {
1722                                                                 rest_addr =
1723                                                                     0x7fff;
1724                                                                 sec_mask =
1725                                                                     0x18000;
1726                                                         } else if (
1727                                                             sec_number == 2 ||
1728                                                             sec_number == 3) {
1729                                                                 rest_addr =
1730                                                                     0x1fff;
1731                                                                 sec_mask =
1732                                                                     0x1e000;
1733                                                         } else if (
1734                                                             sec_number == 4) {
1735                                                                 rest_addr =
1736                                                                     0x3fff;
1737                                                                 sec_mask =
1738                                                                     0x1c000;
1739                                                         }
1740                                                 }
1741                                         }
1742                                 } else if (addr == ha->optrom_size / 2) {
1743                                         WRT_REG_WORD(&reg->nvram, NVR_SELECT);
1744                                         RD_REG_WORD(&reg->nvram);
1745                                 }
1746
1747                                 if (flash_id == 0xda && man_id == 0xc1) {
1748                                         qla2x00_write_flash_byte(ha, 0x5555,
1749                                             0xaa);
1750                                         qla2x00_write_flash_byte(ha, 0x2aaa,
1751                                             0x55);
1752                                         qla2x00_write_flash_byte(ha, 0x5555,
1753                                             0xa0);
1754                                 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
1755                                         /* Then erase it */
1756                                         if (qla2x00_erase_flash_sector(ha,
1757                                             addr, sec_mask, man_id,
1758                                             flash_id)) {
1759                                                 rval = QLA_FUNCTION_FAILED;
1760                                                 break;
1761                                         }
1762                                         if (man_id == 0x01 && flash_id == 0x6d)
1763                                                 sec_number++;
1764                                 }
1765                         }
1766
1767                         if (man_id == 0x01 && flash_id == 0x6d) {
1768                                 if (sec_number == 1 &&
1769                                     addr == (rest_addr - 1)) {
1770                                         rest_addr = 0x0fff;
1771                                         sec_mask   = 0x1f000;
1772                                 } else if (sec_number == 3 && (addr & 0x7ffe)) {
1773                                         rest_addr = 0x3fff;
1774                                         sec_mask   = 0x1c000;
1775                                 }
1776                         }
1777
1778                         if (qla2x00_program_flash_address(ha, addr, data,
1779                             man_id, flash_id)) {
1780                                 rval = QLA_FUNCTION_FAILED;
1781                                 break;
1782                         }
1783                         cond_resched();
1784                 }
1785         } while (0);
1786         qla2x00_flash_disable(ha);
1787
1788         /* Resume HBA. */
1789         qla2x00_resume_hba(ha);
1790
1791         return rval;
1792 }
1793
1794 uint8_t *
1795 qla24xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1796     uint32_t offset, uint32_t length)
1797 {
1798         /* Suspend HBA. */
1799         scsi_block_requests(ha->host);
1800         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1801
1802         /* Go with read. */
1803         qla24xx_read_flash_data(ha, (uint32_t *)buf, offset >> 2, length >> 2);
1804
1805         /* Resume HBA. */
1806         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1807         scsi_unblock_requests(ha->host);
1808
1809         return buf;
1810 }
1811
1812 int
1813 qla24xx_write_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1814     uint32_t offset, uint32_t length)
1815 {
1816         int rval;
1817
1818         /* Suspend HBA. */
1819         scsi_block_requests(ha->host);
1820         set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1821
1822         /* Go with write. */
1823         rval = qla24xx_write_flash_data(ha, (uint32_t *)buf, offset >> 2,
1824             length >> 2);
1825
1826         /* Resume HBA -- RISC reset needed. */
1827         clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
1828         set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
1829         qla2xxx_wake_dpc(ha);
1830         qla2x00_wait_for_hba_online(ha);
1831         scsi_unblock_requests(ha->host);
1832
1833         return rval;
1834 }
1835
1836 uint8_t *
1837 qla25xx_read_optrom_data(struct scsi_qla_host *ha, uint8_t *buf,
1838     uint32_t offset, uint32_t length)
1839 {
1840         int rval;
1841         dma_addr_t optrom_dma;
1842         void *optrom;
1843         uint8_t *pbuf;
1844         uint32_t faddr, left, burst;
1845
1846         if (offset & 0xfff)
1847                 goto slow_read;
1848         if (length < OPTROM_BURST_SIZE)
1849                 goto slow_read;
1850
1851         optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
1852             &optrom_dma, GFP_KERNEL);
1853         if (!optrom) {
1854                 qla_printk(KERN_DEBUG, ha,
1855                     "Unable to allocate memory for optrom burst read "
1856                     "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
1857
1858                 goto slow_read;
1859         }
1860
1861         pbuf = buf;
1862         faddr = offset >> 2;
1863         left = length >> 2;
1864         burst = OPTROM_BURST_DWORDS;
1865         while (left != 0) {
1866                 if (burst > left)
1867                         burst = left;
1868
1869                 rval = qla2x00_dump_ram(ha, optrom_dma,
1870                     flash_data_to_access_addr(faddr), burst);
1871                 if (rval) {
1872                         qla_printk(KERN_WARNING, ha,
1873                             "Unable to burst-read optrom segment "
1874                             "(%x/%x/%llx).\n", rval,
1875                             flash_data_to_access_addr(faddr),
1876                             (unsigned long long)optrom_dma);
1877                         qla_printk(KERN_WARNING, ha,
1878                             "Reverting to slow-read.\n");
1879
1880                         dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
1881                             optrom, optrom_dma);
1882                         goto slow_read;
1883                 }
1884
1885                 memcpy(pbuf, optrom, burst * 4);
1886
1887                 left -= burst;
1888                 faddr += burst;
1889                 pbuf += burst * 4;
1890         }
1891
1892         dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
1893             optrom_dma);
1894
1895         return buf;
1896
1897 slow_read:
1898     return qla24xx_read_optrom_data(ha, buf, offset, length);
1899 }
1900
1901 /**
1902  * qla2x00_get_fcode_version() - Determine an FCODE image's version.
1903  * @ha: HA context
1904  * @pcids: Pointer to the FCODE PCI data structure
1905  *
1906  * The process of retrieving the FCODE version information is at best
1907  * described as interesting.
1908  *
1909  * Within the first 100h bytes of the image an ASCII string is present
1910  * which contains several pieces of information including the FCODE
1911  * version.  Unfortunately it seems the only reliable way to retrieve
1912  * the version is by scanning for another sentinel within the string,
1913  * the FCODE build date:
1914  *
1915  *      ... 2.00.02 10/17/02 ...
1916  *
1917  * Returns QLA_SUCCESS on successful retrieval of version.
1918  */
1919 static void
1920 qla2x00_get_fcode_version(scsi_qla_host_t *ha, uint32_t pcids)
1921 {
1922         int ret = QLA_FUNCTION_FAILED;
1923         uint32_t istart, iend, iter, vend;
1924         uint8_t do_next, rbyte, *vbyte;
1925
1926         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1927
1928         /* Skip the PCI data structure. */
1929         istart = pcids +
1930             ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
1931                 qla2x00_read_flash_byte(ha, pcids + 0x0A));
1932         iend = istart + 0x100;
1933         do {
1934                 /* Scan for the sentinel date string...eeewww. */
1935                 do_next = 0;
1936                 iter = istart;
1937                 while ((iter < iend) && !do_next) {
1938                         iter++;
1939                         if (qla2x00_read_flash_byte(ha, iter) == '/') {
1940                                 if (qla2x00_read_flash_byte(ha, iter + 2) ==
1941                                     '/')
1942                                         do_next++;
1943                                 else if (qla2x00_read_flash_byte(ha,
1944                                     iter + 3) == '/')
1945                                         do_next++;
1946                         }
1947                 }
1948                 if (!do_next)
1949                         break;
1950
1951                 /* Backtrack to previous ' ' (space). */
1952                 do_next = 0;
1953                 while ((iter > istart) && !do_next) {
1954                         iter--;
1955                         if (qla2x00_read_flash_byte(ha, iter) == ' ')
1956                                 do_next++;
1957                 }
1958                 if (!do_next)
1959                         break;
1960
1961                 /*
1962                  * Mark end of version tag, and find previous ' ' (space) or
1963                  * string length (recent FCODE images -- major hack ahead!!!).
1964                  */
1965                 vend = iter - 1;
1966                 do_next = 0;
1967                 while ((iter > istart) && !do_next) {
1968                         iter--;
1969                         rbyte = qla2x00_read_flash_byte(ha, iter);
1970                         if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
1971                                 do_next++;
1972                 }
1973                 if (!do_next)
1974                         break;
1975
1976                 /* Mark beginning of version tag, and copy data. */
1977                 iter++;
1978                 if ((vend - iter) &&
1979                     ((vend - iter) < sizeof(ha->fcode_revision))) {
1980                         vbyte = ha->fcode_revision;
1981                         while (iter <= vend) {
1982                                 *vbyte++ = qla2x00_read_flash_byte(ha, iter);
1983                                 iter++;
1984                         }
1985                         ret = QLA_SUCCESS;
1986                 }
1987         } while (0);
1988
1989         if (ret != QLA_SUCCESS)
1990                 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
1991 }
1992
1993 int
1994 qla2x00_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
1995 {
1996         int ret = QLA_SUCCESS;
1997         uint8_t code_type, last_image;
1998         uint32_t pcihdr, pcids;
1999         uint8_t *dbyte;
2000         uint16_t *dcode;
2001
2002         if (!ha->pio_address || !mbuf)
2003                 return QLA_FUNCTION_FAILED;
2004
2005         memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
2006         memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
2007         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2008         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2009
2010         qla2x00_flash_enable(ha);
2011
2012         /* Begin with first PCI expansion ROM header. */
2013         pcihdr = 0;
2014         last_image = 1;
2015         do {
2016                 /* Verify PCI expansion ROM header. */
2017                 if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
2018                     qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
2019                         /* No signature */
2020                         DEBUG2(printk("scsi(%ld): No matching ROM "
2021                             "signature.\n", ha->host_no));
2022                         ret = QLA_FUNCTION_FAILED;
2023                         break;
2024                 }
2025
2026                 /* Locate PCI data structure. */
2027                 pcids = pcihdr +
2028                     ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
2029                         qla2x00_read_flash_byte(ha, pcihdr + 0x18));
2030
2031                 /* Validate signature of PCI data structure. */
2032                 if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
2033                     qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
2034                     qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
2035                     qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
2036                         /* Incorrect header. */
2037                         DEBUG2(printk("%s(): PCI data struct not found "
2038                             "pcir_adr=%x.\n", __func__, pcids));
2039                         ret = QLA_FUNCTION_FAILED;
2040                         break;
2041                 }
2042
2043                 /* Read version */
2044                 code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
2045                 switch (code_type) {
2046                 case ROM_CODE_TYPE_BIOS:
2047                         /* Intel x86, PC-AT compatible. */
2048                         ha->bios_revision[0] =
2049                             qla2x00_read_flash_byte(ha, pcids + 0x12);
2050                         ha->bios_revision[1] =
2051                             qla2x00_read_flash_byte(ha, pcids + 0x13);
2052                         DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
2053                             ha->bios_revision[1], ha->bios_revision[0]));
2054                         break;
2055                 case ROM_CODE_TYPE_FCODE:
2056                         /* Open Firmware standard for PCI (FCode). */
2057                         /* Eeeewww... */
2058                         qla2x00_get_fcode_version(ha, pcids);
2059                         break;
2060                 case ROM_CODE_TYPE_EFI:
2061                         /* Extensible Firmware Interface (EFI). */
2062                         ha->efi_revision[0] =
2063                             qla2x00_read_flash_byte(ha, pcids + 0x12);
2064                         ha->efi_revision[1] =
2065                             qla2x00_read_flash_byte(ha, pcids + 0x13);
2066                         DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
2067                             ha->efi_revision[1], ha->efi_revision[0]));
2068                         break;
2069                 default:
2070                         DEBUG2(printk("%s(): Unrecognized code type %x at "
2071                             "pcids %x.\n", __func__, code_type, pcids));
2072                         break;
2073                 }
2074
2075                 last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
2076
2077                 /* Locate next PCI expansion ROM. */
2078                 pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
2079                     qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
2080         } while (!last_image);
2081
2082         if (IS_QLA2322(ha)) {
2083                 /* Read firmware image information. */
2084                 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2085                 dbyte = mbuf;
2086                 memset(dbyte, 0, 8);
2087                 dcode = (uint16_t *)dbyte;
2088
2089                 qla2x00_read_flash_data(ha, dbyte, FA_RISC_CODE_ADDR * 4 + 10,
2090                     8);
2091                 DEBUG3(printk("%s(%ld): dumping fw ver from flash:\n",
2092                     __func__, ha->host_no));
2093                 DEBUG3(qla2x00_dump_buffer((uint8_t *)dbyte, 8));
2094
2095                 if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
2096                     dcode[2] == 0xffff && dcode[3] == 0xffff) ||
2097                     (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
2098                     dcode[3] == 0)) {
2099                         DEBUG2(printk("%s(): Unrecognized fw revision at "
2100                             "%x.\n", __func__, FA_RISC_CODE_ADDR * 4));
2101                 } else {
2102                         /* values are in big endian */
2103                         ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
2104                         ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
2105                         ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
2106                 }
2107         }
2108
2109         qla2x00_flash_disable(ha);
2110
2111         return ret;
2112 }
2113
2114 int
2115 qla24xx_get_flash_version(scsi_qla_host_t *ha, void *mbuf)
2116 {
2117         int ret = QLA_SUCCESS;
2118         uint32_t pcihdr, pcids;
2119         uint32_t *dcode;
2120         uint8_t *bcode;
2121         uint8_t code_type, last_image;
2122         int i;
2123
2124         if (!mbuf)
2125                 return QLA_FUNCTION_FAILED;
2126
2127         memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
2128         memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
2129         memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
2130         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2131
2132         dcode = mbuf;
2133
2134         /* Begin with first PCI expansion ROM header. */
2135         pcihdr = 0;
2136         last_image = 1;
2137         do {
2138                 /* Verify PCI expansion ROM header. */
2139                 qla24xx_read_flash_data(ha, dcode, pcihdr >> 2, 0x20);
2140                 bcode = mbuf + (pcihdr % 4);
2141                 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
2142                         /* No signature */
2143                         DEBUG2(printk("scsi(%ld): No matching ROM "
2144                             "signature.\n", ha->host_no));
2145                         ret = QLA_FUNCTION_FAILED;
2146                         break;
2147                 }
2148
2149                 /* Locate PCI data structure. */
2150                 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
2151
2152                 qla24xx_read_flash_data(ha, dcode, pcids >> 2, 0x20);
2153                 bcode = mbuf + (pcihdr % 4);
2154
2155                 /* Validate signature of PCI data structure. */
2156                 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
2157                     bcode[0x2] != 'I' || bcode[0x3] != 'R') {
2158                         /* Incorrect header. */
2159                         DEBUG2(printk("%s(): PCI data struct not found "
2160                             "pcir_adr=%x.\n", __func__, pcids));
2161                         ret = QLA_FUNCTION_FAILED;
2162                         break;
2163                 }
2164
2165                 /* Read version */
2166                 code_type = bcode[0x14];
2167                 switch (code_type) {
2168                 case ROM_CODE_TYPE_BIOS:
2169                         /* Intel x86, PC-AT compatible. */
2170                         ha->bios_revision[0] = bcode[0x12];
2171                         ha->bios_revision[1] = bcode[0x13];
2172                         DEBUG3(printk("%s(): read BIOS %d.%d.\n", __func__,
2173                             ha->bios_revision[1], ha->bios_revision[0]));
2174                         break;
2175                 case ROM_CODE_TYPE_FCODE:
2176                         /* Open Firmware standard for PCI (FCode). */
2177                         ha->fcode_revision[0] = bcode[0x12];
2178                         ha->fcode_revision[1] = bcode[0x13];
2179                         DEBUG3(printk("%s(): read FCODE %d.%d.\n", __func__,
2180                             ha->fcode_revision[1], ha->fcode_revision[0]));
2181                         break;
2182                 case ROM_CODE_TYPE_EFI:
2183                         /* Extensible Firmware Interface (EFI). */
2184                         ha->efi_revision[0] = bcode[0x12];
2185                         ha->efi_revision[1] = bcode[0x13];
2186                         DEBUG3(printk("%s(): read EFI %d.%d.\n", __func__,
2187                             ha->efi_revision[1], ha->efi_revision[0]));
2188                         break;
2189                 default:
2190                         DEBUG2(printk("%s(): Unrecognized code type %x at "
2191                             "pcids %x.\n", __func__, code_type, pcids));
2192                         break;
2193                 }
2194
2195                 last_image = bcode[0x15] & BIT_7;
2196
2197                 /* Locate next PCI expansion ROM. */
2198                 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
2199         } while (!last_image);
2200
2201         /* Read firmware image information. */
2202         memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
2203         dcode = mbuf;
2204
2205         qla24xx_read_flash_data(ha, dcode, FA_RISC_CODE_ADDR + 4, 4);
2206         for (i = 0; i < 4; i++)
2207                 dcode[i] = be32_to_cpu(dcode[i]);
2208
2209         if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
2210             dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
2211             (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
2212             dcode[3] == 0)) {
2213                 DEBUG2(printk("%s(): Unrecognized fw version at %x.\n",
2214                     __func__, FA_RISC_CODE_ADDR));
2215         } else {
2216                 ha->fw_revision[0] = dcode[0];
2217                 ha->fw_revision[1] = dcode[1];
2218                 ha->fw_revision[2] = dcode[2];
2219                 ha->fw_revision[3] = dcode[3];
2220         }
2221
2222         return ret;
2223 }