2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
9 * - Drew Eckhardt <drew@colorado.edu> original
10 * - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
13 * - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
14 * eight major numbers.
15 * - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
16 * - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
17 * sd_init and cleanups.
18 * - Alex Davis <letmein@erols.com> Fix problem where partition info
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
21 * - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
22 * - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
23 * <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
24 * Support 32k/1M disks.
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
35 #include <linux/module.h>
37 #include <linux/kernel.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <asm/uaccess.h>
52 #include <scsi/scsi.h>
53 #include <scsi/scsi_cmnd.h>
54 #include <scsi/scsi_dbg.h>
55 #include <scsi/scsi_device.h>
56 #include <scsi/scsi_driver.h>
57 #include <scsi/scsi_eh.h>
58 #include <scsi/scsi_host.h>
59 #include <scsi/scsi_ioctl.h>
60 #include <scsi/scsicam.h>
63 #include "scsi_logging.h"
65 MODULE_AUTHOR("Eric Youngdale");
66 MODULE_DESCRIPTION("SCSI disk (sd) driver");
67 MODULE_LICENSE("GPL");
69 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
70 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
71 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
72 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
73 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
74 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
86 static DEFINE_IDR(sd_index_idr);
87 static DEFINE_SPINLOCK(sd_index_lock);
89 /* This semaphore is used to mediate the 0->1 reference get in the
90 * face of object destruction (i.e. we can't allow a get on an
91 * object after last put) */
92 static DEFINE_MUTEX(sd_ref_mutex);
94 static const char *sd_cache_types[] = {
95 "write through", "none", "write back",
96 "write back, no read (daft)"
99 static ssize_t sd_store_cache_type(struct class_device *cdev, const char *buf,
102 int i, ct = -1, rcd, wce, sp;
103 struct scsi_disk *sdkp = to_scsi_disk(cdev);
104 struct scsi_device *sdp = sdkp->device;
107 struct scsi_mode_data data;
108 struct scsi_sense_hdr sshdr;
111 if (sdp->type != TYPE_DISK)
112 /* no cache control on RBC devices; theoretically they
113 * can do it, but there's probably so many exceptions
114 * it's not worth the risk */
117 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
118 const int len = strlen(sd_cache_types[i]);
119 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
127 rcd = ct & 0x01 ? 1 : 0;
128 wce = ct & 0x02 ? 1 : 0;
129 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
130 SD_MAX_RETRIES, &data, NULL))
132 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
133 data.block_descriptor_length);
134 buffer_data = buffer + data.header_length +
135 data.block_descriptor_length;
136 buffer_data[2] &= ~0x05;
137 buffer_data[2] |= wce << 2 | rcd;
138 sp = buffer_data[0] & 0x80 ? 1 : 0;
140 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
141 SD_MAX_RETRIES, &data, &sshdr)) {
142 if (scsi_sense_valid(&sshdr))
143 sd_print_sense_hdr(sdkp, &sshdr);
146 sd_revalidate_disk(sdkp->disk);
150 static ssize_t sd_store_allow_restart(struct class_device *cdev, const char *buf,
153 struct scsi_disk *sdkp = to_scsi_disk(cdev);
154 struct scsi_device *sdp = sdkp->device;
156 if (!capable(CAP_SYS_ADMIN))
159 if (sdp->type != TYPE_DISK)
162 sdp->allow_restart = simple_strtoul(buf, NULL, 10);
167 static ssize_t sd_show_cache_type(struct class_device *cdev, char *buf)
169 struct scsi_disk *sdkp = to_scsi_disk(cdev);
170 int ct = sdkp->RCD + 2*sdkp->WCE;
172 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
175 static ssize_t sd_show_fua(struct class_device *cdev, char *buf)
177 struct scsi_disk *sdkp = to_scsi_disk(cdev);
179 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
182 static ssize_t sd_show_allow_restart(struct class_device *cdev, char *buf)
184 struct scsi_disk *sdkp = to_scsi_disk(cdev);
186 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
189 static struct class_device_attribute sd_disk_attrs[] = {
190 __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type,
191 sd_store_cache_type),
192 __ATTR(FUA, S_IRUGO, sd_show_fua, NULL),
193 __ATTR(allow_restart, S_IRUGO|S_IWUSR, sd_show_allow_restart,
194 sd_store_allow_restart),
198 static struct class sd_disk_class = {
200 .owner = THIS_MODULE,
201 .release = scsi_disk_release,
202 .class_dev_attrs = sd_disk_attrs,
205 static struct scsi_driver sd_template = {
206 .owner = THIS_MODULE,
211 .shutdown = sd_shutdown,
214 .init_command = sd_init_command,
215 .issue_flush = sd_issue_flush,
219 * Device no to disk mapping:
221 * major disc2 disc p1
222 * |............|.............|....|....| <- dev_t
225 * Inside a major, we have 16k disks, however mapped non-
226 * contiguously. The first 16 disks are for major0, the next
227 * ones with major1, ... Disk 256 is for major0 again, disk 272
229 * As we stay compatible with our numbering scheme, we can reuse
230 * the well-know SCSI majors 8, 65--71, 136--143.
232 static int sd_major(int major_idx)
236 return SCSI_DISK0_MAJOR;
238 return SCSI_DISK1_MAJOR + major_idx - 1;
240 return SCSI_DISK8_MAJOR + major_idx - 8;
243 return 0; /* shut up gcc */
247 static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
249 return container_of(disk->private_data, struct scsi_disk, driver);
252 static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
254 struct scsi_disk *sdkp = NULL;
256 if (disk->private_data) {
257 sdkp = scsi_disk(disk);
258 if (scsi_device_get(sdkp->device) == 0)
259 class_device_get(&sdkp->cdev);
266 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
268 struct scsi_disk *sdkp;
270 mutex_lock(&sd_ref_mutex);
271 sdkp = __scsi_disk_get(disk);
272 mutex_unlock(&sd_ref_mutex);
276 static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
278 struct scsi_disk *sdkp;
280 mutex_lock(&sd_ref_mutex);
281 sdkp = dev_get_drvdata(dev);
283 sdkp = __scsi_disk_get(sdkp->disk);
284 mutex_unlock(&sd_ref_mutex);
288 static void scsi_disk_put(struct scsi_disk *sdkp)
290 struct scsi_device *sdev = sdkp->device;
292 mutex_lock(&sd_ref_mutex);
293 class_device_put(&sdkp->cdev);
294 scsi_device_put(sdev);
295 mutex_unlock(&sd_ref_mutex);
299 * sd_init_command - build a scsi (read or write) command from
300 * information in the request structure.
301 * @SCpnt: pointer to mid-level's per scsi command structure that
302 * contains request and into which the scsi command is written
304 * Returns 1 if successful and 0 if error (or cannot be done now).
306 static int sd_init_command(struct scsi_cmnd * SCpnt)
308 struct scsi_device *sdp = SCpnt->device;
309 struct request *rq = SCpnt->request;
310 struct gendisk *disk = rq->rq_disk;
311 sector_t block = rq->sector;
312 unsigned int this_count = SCpnt->request_bufflen >> 9;
313 unsigned int timeout = sdp->timeout;
315 SCSI_LOG_HLQUEUE(1, scmd_printk(KERN_INFO, SCpnt,
316 "sd_init_command: block=%llu, "
318 (unsigned long long)block,
321 if (!sdp || !scsi_device_online(sdp) ||
322 block + rq->nr_sectors > get_capacity(disk)) {
323 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
324 "Finishing %ld sectors\n",
326 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
327 "Retry with 0x%p\n", SCpnt));
333 * quietly refuse to do anything to a changed disc until
334 * the changed bit has been reset
336 /* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
339 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
340 (unsigned long long)block));
343 * If we have a 1K hardware sectorsize, prevent access to single
344 * 512 byte sectors. In theory we could handle this - in fact
345 * the scsi cdrom driver must be able to handle this because
346 * we typically use 1K blocksizes, and cdroms typically have
347 * 2K hardware sectorsizes. Of course, things are simpler
348 * with the cdrom, since it is read-only. For performance
349 * reasons, the filesystems should be able to handle this
350 * and not force the scsi disk driver to use bounce buffers
353 if (sdp->sector_size == 1024) {
354 if ((block & 1) || (rq->nr_sectors & 1)) {
355 scmd_printk(KERN_ERR, SCpnt,
356 "Bad block number requested\n");
360 this_count = this_count >> 1;
363 if (sdp->sector_size == 2048) {
364 if ((block & 3) || (rq->nr_sectors & 3)) {
365 scmd_printk(KERN_ERR, SCpnt,
366 "Bad block number requested\n");
370 this_count = this_count >> 2;
373 if (sdp->sector_size == 4096) {
374 if ((block & 7) || (rq->nr_sectors & 7)) {
375 scmd_printk(KERN_ERR, SCpnt,
376 "Bad block number requested\n");
380 this_count = this_count >> 3;
383 if (rq_data_dir(rq) == WRITE) {
384 if (!sdp->writeable) {
387 SCpnt->cmnd[0] = WRITE_6;
388 SCpnt->sc_data_direction = DMA_TO_DEVICE;
389 } else if (rq_data_dir(rq) == READ) {
390 SCpnt->cmnd[0] = READ_6;
391 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
393 scmd_printk(KERN_ERR, SCpnt, "Unknown command %x\n", rq->cmd_flags);
397 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
398 "%s %d/%ld 512 byte blocks.\n",
399 (rq_data_dir(rq) == WRITE) ?
400 "writing" : "reading", this_count,
405 if (block > 0xffffffff) {
406 SCpnt->cmnd[0] += READ_16 - READ_6;
407 SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
408 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
409 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
410 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
411 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
412 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
413 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
414 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
415 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
416 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
417 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
418 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
419 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
420 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
421 } else if ((this_count > 0xff) || (block > 0x1fffff) ||
422 SCpnt->device->use_10_for_rw) {
423 if (this_count > 0xffff)
426 SCpnt->cmnd[0] += READ_10 - READ_6;
427 SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
428 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
429 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
430 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
431 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
432 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
433 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
434 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
436 if (unlikely(blk_fua_rq(rq))) {
438 * This happens only if this drive failed
439 * 10byte rw command with ILLEGAL_REQUEST
440 * during operation and thus turned off
443 scmd_printk(KERN_ERR, SCpnt,
444 "FUA write on READ/WRITE(6) drive\n");
448 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
449 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
450 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
451 SCpnt->cmnd[4] = (unsigned char) this_count;
454 SCpnt->request_bufflen = this_count * sdp->sector_size;
457 * We shouldn't disconnect in the middle of a sector, so with a dumb
458 * host adapter, it's safe to assume that we can at least transfer
459 * this many bytes between each connect / disconnect.
461 SCpnt->transfersize = sdp->sector_size;
462 SCpnt->underflow = this_count << 9;
463 SCpnt->allowed = SD_MAX_RETRIES;
464 SCpnt->timeout_per_command = timeout;
467 * This is the completion routine we use. This is matched in terms
468 * of capability to this function.
470 SCpnt->done = sd_rw_intr;
473 * This indicates that the command is ready from our end to be
480 * sd_open - open a scsi disk device
481 * @inode: only i_rdev member may be used
482 * @filp: only f_mode and f_flags may be used
484 * Returns 0 if successful. Returns a negated errno value in case
487 * Note: This can be called from a user context (e.g. fsck(1) )
488 * or from within the kernel (e.g. as a result of a mount(1) ).
489 * In the latter case @inode and @filp carry an abridged amount
490 * of information as noted above.
492 static int sd_open(struct inode *inode, struct file *filp)
494 struct gendisk *disk = inode->i_bdev->bd_disk;
495 struct scsi_disk *sdkp;
496 struct scsi_device *sdev;
499 if (!(sdkp = scsi_disk_get(disk)))
503 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
508 * If the device is in error recovery, wait until it is done.
509 * If the device is offline, then disallow any access to it.
512 if (!scsi_block_when_processing_errors(sdev))
515 if (sdev->removable || sdkp->write_prot)
516 check_disk_change(inode->i_bdev);
519 * If the drive is empty, just let the open fail.
522 if (sdev->removable && !sdkp->media_present &&
523 !(filp->f_flags & O_NDELAY))
527 * If the device has the write protect tab set, have the open fail
528 * if the user expects to be able to write to the thing.
531 if (sdkp->write_prot && (filp->f_mode & FMODE_WRITE))
535 * It is possible that the disk changing stuff resulted in
536 * the device being taken offline. If this is the case,
537 * report this to the user, and don't pretend that the
538 * open actually succeeded.
541 if (!scsi_device_online(sdev))
544 if (!sdkp->openers++ && sdev->removable) {
545 if (scsi_block_when_processing_errors(sdev))
546 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
557 * sd_release - invoked when the (last) close(2) is called on this
559 * @inode: only i_rdev member may be used
560 * @filp: only f_mode and f_flags may be used
564 * Note: may block (uninterruptible) if error recovery is underway
567 static int sd_release(struct inode *inode, struct file *filp)
569 struct gendisk *disk = inode->i_bdev->bd_disk;
570 struct scsi_disk *sdkp = scsi_disk(disk);
571 struct scsi_device *sdev = sdkp->device;
573 SCSI_LOG_HLQUEUE(3, sdkp_printk(KERN_INFO, sdkp, "sd_release\n"));
575 if (!--sdkp->openers && sdev->removable) {
576 if (scsi_block_when_processing_errors(sdev))
577 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
581 * XXX and what if there are packets in flight and this close()
582 * XXX is followed by a "rmmod sd_mod"?
588 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
590 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
591 struct scsi_device *sdp = sdkp->device;
592 struct Scsi_Host *host = sdp->host;
595 /* default to most commonly used values */
596 diskinfo[0] = 0x40; /* 1 << 6 */
597 diskinfo[1] = 0x20; /* 1 << 5 */
598 diskinfo[2] = sdkp->capacity >> 11;
600 /* override with calculated, extended default, or driver values */
601 if (host->hostt->bios_param)
602 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
604 scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
606 geo->heads = diskinfo[0];
607 geo->sectors = diskinfo[1];
608 geo->cylinders = diskinfo[2];
613 * sd_ioctl - process an ioctl
614 * @inode: only i_rdev/i_bdev members may be used
615 * @filp: only f_mode and f_flags may be used
616 * @cmd: ioctl command number
617 * @arg: this is third argument given to ioctl(2) system call.
618 * Often contains a pointer.
620 * Returns 0 if successful (some ioctls return postive numbers on
621 * success as well). Returns a negated errno value in case of error.
623 * Note: most ioctls are forward onto the block subsystem or further
624 * down in the scsi subsytem.
626 static int sd_ioctl(struct inode * inode, struct file * filp,
627 unsigned int cmd, unsigned long arg)
629 struct block_device *bdev = inode->i_bdev;
630 struct gendisk *disk = bdev->bd_disk;
631 struct scsi_device *sdp = scsi_disk(disk)->device;
632 void __user *p = (void __user *)arg;
635 SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
636 disk->disk_name, cmd));
639 * If we are in the middle of error recovery, don't let anyone
640 * else try and use this device. Also, if error recovery fails, it
641 * may try and take the device offline, in which case all further
642 * access to the device is prohibited.
644 error = scsi_nonblockable_ioctl(sdp, cmd, p, filp);
645 if (!scsi_block_when_processing_errors(sdp) || !error)
649 * Send SCSI addressing ioctls directly to mid level, send other
650 * ioctls to block level and then onto mid level if they can't be
654 case SCSI_IOCTL_GET_IDLUN:
655 case SCSI_IOCTL_GET_BUS_NUMBER:
656 return scsi_ioctl(sdp, cmd, p);
658 error = scsi_cmd_ioctl(filp, disk, cmd, p);
659 if (error != -ENOTTY)
662 return scsi_ioctl(sdp, cmd, p);
665 static void set_media_not_present(struct scsi_disk *sdkp)
667 sdkp->media_present = 0;
669 sdkp->device->changed = 1;
673 * sd_media_changed - check if our medium changed
674 * @disk: kernel device descriptor
676 * Returns 0 if not applicable or no change; 1 if change
678 * Note: this function is invoked from the block subsystem.
680 static int sd_media_changed(struct gendisk *disk)
682 struct scsi_disk *sdkp = scsi_disk(disk);
683 struct scsi_device *sdp = sdkp->device;
686 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
692 * If the device is offline, don't send any commands - just pretend as
693 * if the command failed. If the device ever comes back online, we
694 * can deal with it then. It is only because of unrecoverable errors
695 * that we would ever take a device offline in the first place.
697 if (!scsi_device_online(sdp))
701 * Using TEST_UNIT_READY enables differentiation between drive with
702 * no cartridge loaded - NOT READY, drive with changed cartridge -
703 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
705 * Drives that auto spin down. eg iomega jaz 1G, will be started
706 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
707 * sd_revalidate() is called.
710 if (scsi_block_when_processing_errors(sdp))
711 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES);
714 * Unable to test, unit probably not ready. This usually
715 * means there is no disc in the drive. Mark as changed,
716 * and we will figure it out later once the drive is
723 * For removable scsi disk we have to recognise the presence
724 * of a disk in the drive. This is kept in the struct scsi_disk
725 * struct and tested at open ! Daniel Roche (dan@lectra.fr)
727 sdkp->media_present = 1;
729 retval = sdp->changed;
735 set_media_not_present(sdkp);
739 static int sd_sync_cache(struct scsi_disk *sdkp)
742 struct scsi_device *sdp = sdkp->device;
743 struct scsi_sense_hdr sshdr;
745 if (!scsi_device_online(sdp))
749 for (retries = 3; retries > 0; --retries) {
750 unsigned char cmd[10] = { 0 };
752 cmd[0] = SYNCHRONIZE_CACHE;
754 * Leave the rest of the command zero to indicate
757 res = scsi_execute_req(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
758 SD_TIMEOUT, SD_MAX_RETRIES);
764 sd_print_result(sdkp, res);
765 if (driver_byte(res) & DRIVER_SENSE)
766 sd_print_sense_hdr(sdkp, &sshdr);
772 static int sd_issue_flush(struct device *dev, sector_t *error_sector)
775 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
781 ret = sd_sync_cache(sdkp);
786 static void sd_prepare_flush(request_queue_t *q, struct request *rq)
788 memset(rq->cmd, 0, sizeof(rq->cmd));
789 rq->cmd_type = REQ_TYPE_BLOCK_PC;
790 rq->timeout = SD_TIMEOUT;
791 rq->cmd[0] = SYNCHRONIZE_CACHE;
795 static void sd_rescan(struct device *dev)
797 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
800 sd_revalidate_disk(sdkp->disk);
808 * This gets directly called from VFS. When the ioctl
809 * is not recognized we go back to the other translation paths.
811 static long sd_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
813 struct block_device *bdev = file->f_path.dentry->d_inode->i_bdev;
814 struct gendisk *disk = bdev->bd_disk;
815 struct scsi_device *sdev = scsi_disk(disk)->device;
818 * If we are in the middle of error recovery, don't let anyone
819 * else try and use this device. Also, if error recovery fails, it
820 * may try and take the device offline, in which case all further
821 * access to the device is prohibited.
823 if (!scsi_block_when_processing_errors(sdev))
826 if (sdev->host->hostt->compat_ioctl) {
829 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
835 * Let the static ioctl translation table take care of it.
841 static struct block_device_operations sd_fops = {
842 .owner = THIS_MODULE,
844 .release = sd_release,
848 .compat_ioctl = sd_compat_ioctl,
850 .media_changed = sd_media_changed,
851 .revalidate_disk = sd_revalidate_disk,
855 * sd_rw_intr - bottom half handler: called when the lower level
856 * driver has completed (successfully or otherwise) a scsi command.
857 * @SCpnt: mid-level's per command structure.
859 * Note: potentially run from within an ISR. Must not block.
861 static void sd_rw_intr(struct scsi_cmnd * SCpnt)
863 int result = SCpnt->result;
864 unsigned int xfer_size = SCpnt->request_bufflen;
865 unsigned int good_bytes = result ? 0 : xfer_size;
866 u64 start_lba = SCpnt->request->sector;
868 struct scsi_sense_hdr sshdr;
870 int sense_deferred = 0;
874 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
876 sense_deferred = scsi_sense_is_deferred(&sshdr);
878 #ifdef CONFIG_SCSI_LOGGING
879 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
881 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
882 "sd_rw_intr: sb[respc,sk,asc,"
883 "ascq]=%x,%x,%x,%x\n",
885 sshdr.sense_key, sshdr.asc,
889 if (driver_byte(result) != DRIVER_SENSE &&
890 (!sense_valid || sense_deferred))
893 switch (sshdr.sense_key) {
896 if (!blk_fs_request(SCpnt->request))
898 info_valid = scsi_get_sense_info_fld(SCpnt->sense_buffer,
899 SCSI_SENSE_BUFFERSIZE,
903 if (xfer_size <= SCpnt->device->sector_size)
905 switch (SCpnt->device->sector_size) {
921 /* Print something here with limiting frequency. */
925 /* This computation should always be done in terms of
926 * the resolution of the device's medium.
928 good_bytes = (bad_lba - start_lba)*SCpnt->device->sector_size;
930 case RECOVERED_ERROR:
932 /* Inform the user, but make sure that it's not treated
935 scsi_print_sense("sd", SCpnt);
937 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
938 good_bytes = xfer_size;
940 case ILLEGAL_REQUEST:
941 if (SCpnt->device->use_10_for_rw &&
942 (SCpnt->cmnd[0] == READ_10 ||
943 SCpnt->cmnd[0] == WRITE_10))
944 SCpnt->device->use_10_for_rw = 0;
945 if (SCpnt->device->use_10_for_ms &&
946 (SCpnt->cmnd[0] == MODE_SENSE_10 ||
947 SCpnt->cmnd[0] == MODE_SELECT_10))
948 SCpnt->device->use_10_for_ms = 0;
954 scsi_io_completion(SCpnt, good_bytes);
957 static int media_not_present(struct scsi_disk *sdkp,
958 struct scsi_sense_hdr *sshdr)
961 if (!scsi_sense_valid(sshdr))
963 /* not invoked for commands that could return deferred errors */
964 if (sshdr->sense_key != NOT_READY &&
965 sshdr->sense_key != UNIT_ATTENTION)
967 if (sshdr->asc != 0x3A) /* medium not present */
970 set_media_not_present(sdkp);
975 * spinup disk - called only in sd_revalidate_disk()
978 sd_spinup_disk(struct scsi_disk *sdkp)
980 unsigned char cmd[10];
981 unsigned long spintime_expire = 0;
982 int retries, spintime;
983 unsigned int the_result;
984 struct scsi_sense_hdr sshdr;
989 /* Spin up drives, as required. Only do this at boot time */
990 /* Spinup needs to be done for module loads too. */
995 cmd[0] = TEST_UNIT_READY;
996 memset((void *) &cmd[1], 0, 9);
998 the_result = scsi_execute_req(sdkp->device, cmd,
1004 * If the drive has indicated to us that it
1005 * doesn't have any media in it, don't bother
1006 * with any more polling.
1008 if (media_not_present(sdkp, &sshdr))
1012 sense_valid = scsi_sense_valid(&sshdr);
1014 } while (retries < 3 &&
1015 (!scsi_status_is_good(the_result) ||
1016 ((driver_byte(the_result) & DRIVER_SENSE) &&
1017 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1019 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1020 /* no sense, TUR either succeeded or failed
1021 * with a status error */
1022 if(!spintime && !scsi_status_is_good(the_result)) {
1023 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1024 sd_print_result(sdkp, the_result);
1030 * The device does not want the automatic start to be issued.
1032 if (sdkp->device->no_start_on_add) {
1037 * If manual intervention is required, or this is an
1038 * absent USB storage device, a spinup is meaningless.
1041 sshdr.sense_key == NOT_READY &&
1042 sshdr.asc == 4 && sshdr.ascq == 3) {
1043 break; /* manual intervention required */
1046 * Issue command to spin up drive when not ready
1048 } else if (sense_valid && sshdr.sense_key == NOT_READY) {
1050 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1051 cmd[0] = START_STOP;
1052 cmd[1] = 1; /* Return immediately */
1053 memset((void *) &cmd[2], 0, 8);
1054 cmd[4] = 1; /* Start spin cycle */
1055 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1057 SD_TIMEOUT, SD_MAX_RETRIES);
1058 spintime_expire = jiffies + 100 * HZ;
1061 /* Wait 1 second for next try */
1066 * Wait for USB flash devices with slow firmware.
1067 * Yes, this sense key/ASC combination shouldn't
1068 * occur here. It's characteristic of these devices.
1070 } else if (sense_valid &&
1071 sshdr.sense_key == UNIT_ATTENTION &&
1072 sshdr.asc == 0x28) {
1074 spintime_expire = jiffies + 5 * HZ;
1077 /* Wait 1 second for next try */
1080 /* we don't understand the sense code, so it's
1081 * probably pointless to loop */
1083 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1084 sd_print_sense_hdr(sdkp, &sshdr);
1089 } while (spintime && time_before_eq(jiffies, spintime_expire));
1092 if (scsi_status_is_good(the_result))
1095 printk("not responding...\n");
1100 * read disk capacity
1103 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
1105 unsigned char cmd[16];
1106 int the_result, retries;
1107 int sector_size = 0;
1109 struct scsi_sense_hdr sshdr;
1110 int sense_valid = 0;
1111 struct scsi_device *sdp = sdkp->device;
1117 memset((void *) cmd, 0, 16);
1118 cmd[0] = SERVICE_ACTION_IN;
1119 cmd[1] = SAI_READ_CAPACITY_16;
1121 memset((void *) buffer, 0, 12);
1123 cmd[0] = READ_CAPACITY;
1124 memset((void *) &cmd[1], 0, 9);
1125 memset((void *) buffer, 0, 8);
1128 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1129 buffer, longrc ? 12 : 8, &sshdr,
1130 SD_TIMEOUT, SD_MAX_RETRIES);
1132 if (media_not_present(sdkp, &sshdr))
1136 sense_valid = scsi_sense_valid(&sshdr);
1139 } while (the_result && retries);
1141 if (the_result && !longrc) {
1142 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
1143 sd_print_result(sdkp, the_result);
1144 if (driver_byte(the_result) & DRIVER_SENSE)
1145 sd_print_sense_hdr(sdkp, &sshdr);
1147 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1149 /* Set dirty bit for removable devices if not ready -
1150 * sometimes drives will not report this properly. */
1151 if (sdp->removable &&
1152 sense_valid && sshdr.sense_key == NOT_READY)
1155 /* Either no media are present but the drive didn't tell us,
1156 or they are present but the read capacity command fails */
1157 /* sdkp->media_present = 0; -- not always correct */
1158 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1161 } else if (the_result && longrc) {
1162 /* READ CAPACITY(16) has been failed */
1163 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1164 sd_print_result(sdkp, the_result);
1165 sd_printk(KERN_NOTICE, sdkp, "Use 0xffffffff as device size\n");
1167 sdkp->capacity = 1 + (sector_t) 0xffffffff;
1172 sector_size = (buffer[4] << 24) |
1173 (buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
1174 if (buffer[0] == 0xff && buffer[1] == 0xff &&
1175 buffer[2] == 0xff && buffer[3] == 0xff) {
1176 if(sizeof(sdkp->capacity) > 4) {
1177 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
1178 "Trying to use READ CAPACITY(16).\n");
1182 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use "
1183 "a kernel compiled with support for large "
1184 "block devices.\n");
1188 sdkp->capacity = 1 + (((sector_t)buffer[0] << 24) |
1193 sdkp->capacity = 1 + (((u64)buffer[0] << 56) |
1194 ((u64)buffer[1] << 48) |
1195 ((u64)buffer[2] << 40) |
1196 ((u64)buffer[3] << 32) |
1197 ((sector_t)buffer[4] << 24) |
1198 ((sector_t)buffer[5] << 16) |
1199 ((sector_t)buffer[6] << 8) |
1200 (sector_t)buffer[7]);
1202 sector_size = (buffer[8] << 24) |
1203 (buffer[9] << 16) | (buffer[10] << 8) | buffer[11];
1206 /* Some devices return the total number of sectors, not the
1207 * highest sector number. Make the necessary adjustment. */
1208 if (sdp->fix_capacity) {
1211 /* Some devices have version which report the correct sizes
1212 * and others which do not. We guess size according to a heuristic
1213 * and err on the side of lowering the capacity. */
1215 if (sdp->guess_capacity)
1216 if (sdkp->capacity & 0x01) /* odd sizes are odd */
1221 if (sector_size == 0) {
1223 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
1227 if (sector_size != 512 &&
1228 sector_size != 1024 &&
1229 sector_size != 2048 &&
1230 sector_size != 4096 &&
1231 sector_size != 256) {
1232 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
1235 * The user might want to re-format the drive with
1236 * a supported sectorsize. Once this happens, it
1237 * would be relatively trivial to set the thing up.
1238 * For this reason, we leave the thing in the table.
1242 * set a bogus sector size so the normal read/write
1243 * logic in the block layer will eventually refuse any
1244 * request on this device without tripping over power
1245 * of two sector size assumptions
1251 * The msdos fs needs to know the hardware sector size
1252 * So I have created this table. See ll_rw_blk.c
1253 * Jacques Gelinas (Jacques@solucorp.qc.ca)
1255 int hard_sector = sector_size;
1256 sector_t sz = (sdkp->capacity/2) * (hard_sector/256);
1257 request_queue_t *queue = sdp->request_queue;
1260 blk_queue_hardsect_size(queue, hard_sector);
1261 /* avoid 64-bit division on 32-bit platforms */
1262 sector_div(sz, 625);
1264 sector_div(mb, 1950);
1266 sd_printk(KERN_NOTICE, sdkp,
1267 "%llu %d-byte hardware sectors (%llu MB)\n",
1268 (unsigned long long)sdkp->capacity,
1269 hard_sector, (unsigned long long)mb);
1272 /* Rescale capacity to 512-byte units */
1273 if (sector_size == 4096)
1274 sdkp->capacity <<= 3;
1275 else if (sector_size == 2048)
1276 sdkp->capacity <<= 2;
1277 else if (sector_size == 1024)
1278 sdkp->capacity <<= 1;
1279 else if (sector_size == 256)
1280 sdkp->capacity >>= 1;
1282 sdkp->device->sector_size = sector_size;
1285 /* called with buffer of length 512 */
1287 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
1288 unsigned char *buffer, int len, struct scsi_mode_data *data,
1289 struct scsi_sense_hdr *sshdr)
1291 return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
1292 SD_TIMEOUT, SD_MAX_RETRIES, data,
1297 * read write protect setting, if possible - called only in sd_revalidate_disk()
1298 * called with buffer of length SD_BUF_SIZE
1301 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
1304 struct scsi_device *sdp = sdkp->device;
1305 struct scsi_mode_data data;
1307 set_disk_ro(sdkp->disk, 0);
1308 if (sdp->skip_ms_page_3f) {
1309 sd_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
1313 if (sdp->use_192_bytes_for_3f) {
1314 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
1317 * First attempt: ask for all pages (0x3F), but only 4 bytes.
1318 * We have to start carefully: some devices hang if we ask
1319 * for more than is available.
1321 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
1324 * Second attempt: ask for page 0 When only page 0 is
1325 * implemented, a request for page 3F may return Sense Key
1326 * 5: Illegal Request, Sense Code 24: Invalid field in
1329 if (!scsi_status_is_good(res))
1330 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
1333 * Third attempt: ask 255 bytes, as we did earlier.
1335 if (!scsi_status_is_good(res))
1336 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
1340 if (!scsi_status_is_good(res)) {
1341 sd_printk(KERN_WARNING, sdkp,
1342 "Test WP failed, assume Write Enabled\n");
1344 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
1345 set_disk_ro(sdkp->disk, sdkp->write_prot);
1346 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
1347 sdkp->write_prot ? "on" : "off");
1348 sd_printk(KERN_DEBUG, sdkp,
1349 "Mode Sense: %02x %02x %02x %02x\n",
1350 buffer[0], buffer[1], buffer[2], buffer[3]);
1355 * sd_read_cache_type - called only from sd_revalidate_disk()
1356 * called with buffer of length SD_BUF_SIZE
1359 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
1362 struct scsi_device *sdp = sdkp->device;
1366 struct scsi_mode_data data;
1367 struct scsi_sense_hdr sshdr;
1369 if (sdp->skip_ms_page_8)
1372 if (sdp->type == TYPE_RBC) {
1380 /* cautiously ask */
1381 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, 4, &data, &sshdr);
1383 if (!scsi_status_is_good(res))
1386 if (!data.header_length) {
1388 sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n");
1391 /* that went OK, now ask for the proper length */
1395 * We're only interested in the first three bytes, actually.
1396 * But the data cache page is defined for the first 20.
1403 /* Take headers and block descriptors into account */
1404 len += data.header_length + data.block_descriptor_length;
1405 if (len > SD_BUF_SIZE)
1409 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
1411 if (scsi_status_is_good(res)) {
1412 int offset = data.header_length + data.block_descriptor_length;
1414 if (offset >= SD_BUF_SIZE - 2) {
1415 sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n");
1419 if ((buffer[offset] & 0x3f) != modepage) {
1420 sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
1424 if (modepage == 8) {
1425 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
1426 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
1428 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
1432 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
1433 if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
1434 sd_printk(KERN_NOTICE, sdkp,
1435 "Uses READ/WRITE(6), disabling FUA\n");
1439 sd_printk(KERN_NOTICE, sdkp,
1440 "Write cache: %s, read cache: %s, %s\n",
1441 sdkp->WCE ? "enabled" : "disabled",
1442 sdkp->RCD ? "disabled" : "enabled",
1443 sdkp->DPOFUA ? "supports DPO and FUA"
1444 : "doesn't support DPO or FUA");
1450 if (scsi_sense_valid(&sshdr) &&
1451 sshdr.sense_key == ILLEGAL_REQUEST &&
1452 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
1453 /* Invalid field in CDB */
1454 sd_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
1456 sd_printk(KERN_ERR, sdkp, "Asking for cache data failed\n");
1459 sd_printk(KERN_ERR, sdkp, "Assuming drive cache: write through\n");
1466 * sd_revalidate_disk - called the first time a new disk is seen,
1467 * performs disk spin up, read_capacity, etc.
1468 * @disk: struct gendisk we care about
1470 static int sd_revalidate_disk(struct gendisk *disk)
1472 struct scsi_disk *sdkp = scsi_disk(disk);
1473 struct scsi_device *sdp = sdkp->device;
1474 unsigned char *buffer;
1477 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
1478 "sd_revalidate_disk\n"));
1481 * If the device is offline, don't try and read capacity or any
1482 * of the other niceties.
1484 if (!scsi_device_online(sdp))
1487 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL | __GFP_DMA);
1489 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
1490 "allocation failure.\n");
1494 /* defaults, until the device tells us otherwise */
1495 sdp->sector_size = 512;
1497 sdkp->media_present = 1;
1498 sdkp->write_prot = 0;
1502 sd_spinup_disk(sdkp);
1505 * Without media there is no reason to ask; moreover, some devices
1506 * react badly if we do.
1508 if (sdkp->media_present) {
1509 sd_read_capacity(sdkp, buffer);
1510 sd_read_write_protect_flag(sdkp, buffer);
1511 sd_read_cache_type(sdkp, buffer);
1515 * We now have all cache related info, determine how we deal
1516 * with ordered requests. Note that as the current SCSI
1517 * dispatch function can alter request order, we cannot use
1518 * QUEUE_ORDERED_TAG_* even when ordered tag is supported.
1521 ordered = sdkp->DPOFUA
1522 ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH;
1524 ordered = QUEUE_ORDERED_DRAIN;
1526 blk_queue_ordered(sdkp->disk->queue, ordered, sd_prepare_flush);
1528 set_capacity(disk, sdkp->capacity);
1536 * sd_probe - called during driver initialization and whenever a
1537 * new scsi device is attached to the system. It is called once
1538 * for each scsi device (not just disks) present.
1539 * @dev: pointer to device object
1541 * Returns 0 if successful (or not interested in this scsi device
1542 * (e.g. scanner)); 1 when there is an error.
1544 * Note: this function is invoked from the scsi mid-level.
1545 * This function sets up the mapping between a given
1546 * <host,channel,id,lun> (found in sdp) and new device name
1547 * (e.g. /dev/sda). More precisely it is the block device major
1548 * and minor number that is chosen here.
1550 * Assume sd_attach is not re-entrant (for time being)
1551 * Also think about sd_attach() and sd_remove() running coincidentally.
1553 static int sd_probe(struct device *dev)
1555 struct scsi_device *sdp = to_scsi_device(dev);
1556 struct scsi_disk *sdkp;
1562 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
1565 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
1569 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
1573 gd = alloc_disk(16);
1577 if (!idr_pre_get(&sd_index_idr, GFP_KERNEL))
1580 spin_lock(&sd_index_lock);
1581 error = idr_get_new(&sd_index_idr, NULL, &index);
1582 spin_unlock(&sd_index_lock);
1584 if (index >= SD_MAX_DISKS)
1590 sdkp->driver = &sd_template;
1592 sdkp->index = index;
1595 if (!sdp->timeout) {
1596 if (sdp->type != TYPE_MOD)
1597 sdp->timeout = SD_TIMEOUT;
1599 sdp->timeout = SD_MOD_TIMEOUT;
1602 class_device_initialize(&sdkp->cdev);
1603 sdkp->cdev.dev = &sdp->sdev_gendev;
1604 sdkp->cdev.class = &sd_disk_class;
1605 strncpy(sdkp->cdev.class_id, sdp->sdev_gendev.bus_id, BUS_ID_SIZE);
1607 if (class_device_add(&sdkp->cdev))
1610 get_device(&sdp->sdev_gendev);
1612 gd->major = sd_major((index & 0xf0) >> 4);
1613 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
1615 gd->fops = &sd_fops;
1618 sprintf(gd->disk_name, "sd%c", 'a' + index % 26);
1619 } else if (index < (26 + 1) * 26) {
1620 sprintf(gd->disk_name, "sd%c%c",
1621 'a' + index / 26 - 1,'a' + index % 26);
1623 const unsigned int m1 = (index / 26 - 1) / 26 - 1;
1624 const unsigned int m2 = (index / 26 - 1) % 26;
1625 const unsigned int m3 = index % 26;
1626 sprintf(gd->disk_name, "sd%c%c%c",
1627 'a' + m1, 'a' + m2, 'a' + m3);
1630 gd->private_data = &sdkp->driver;
1631 gd->queue = sdkp->device->request_queue;
1633 sd_revalidate_disk(gd);
1635 gd->driverfs_dev = &sdp->sdev_gendev;
1636 gd->flags = GENHD_FL_DRIVERFS;
1638 gd->flags |= GENHD_FL_REMOVABLE;
1640 dev_set_drvdata(dev, sdkp);
1643 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
1644 sdp->removable ? "removable " : "");
1657 * sd_remove - called whenever a scsi disk (previously recognized by
1658 * sd_probe) is detached from the system. It is called (potentially
1659 * multiple times) during sd module unload.
1660 * @sdp: pointer to mid level scsi device object
1662 * Note: this function is invoked from the scsi mid-level.
1663 * This function potentially frees up a device name (e.g. /dev/sdc)
1664 * that could be re-used by a subsequent sd_probe().
1665 * This function is not called when the built-in sd driver is "exit-ed".
1667 static int sd_remove(struct device *dev)
1669 struct scsi_disk *sdkp = dev_get_drvdata(dev);
1671 class_device_del(&sdkp->cdev);
1672 del_gendisk(sdkp->disk);
1675 mutex_lock(&sd_ref_mutex);
1676 dev_set_drvdata(dev, NULL);
1677 class_device_put(&sdkp->cdev);
1678 mutex_unlock(&sd_ref_mutex);
1684 * scsi_disk_release - Called to free the scsi_disk structure
1685 * @cdev: pointer to embedded class device
1687 * sd_ref_mutex must be held entering this routine. Because it is
1688 * called on last put, you should always use the scsi_disk_get()
1689 * scsi_disk_put() helpers which manipulate the semaphore directly
1690 * and never do a direct class_device_put().
1692 static void scsi_disk_release(struct class_device *cdev)
1694 struct scsi_disk *sdkp = to_scsi_disk(cdev);
1695 struct gendisk *disk = sdkp->disk;
1697 spin_lock(&sd_index_lock);
1698 idr_remove(&sd_index_idr, sdkp->index);
1699 spin_unlock(&sd_index_lock);
1701 disk->private_data = NULL;
1703 put_device(&sdkp->device->sdev_gendev);
1709 * Send a SYNCHRONIZE CACHE instruction down to the device through
1710 * the normal SCSI command structure. Wait for the command to
1713 static void sd_shutdown(struct device *dev)
1715 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1718 return; /* this can happen */
1721 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
1722 sd_sync_cache(sdkp);
1724 scsi_disk_put(sdkp);
1728 * init_sd - entry point for this driver (both when built in or when
1731 * Note: this function registers this driver with the scsi mid-level.
1733 static int __init init_sd(void)
1735 int majors = 0, i, err;
1737 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
1739 for (i = 0; i < SD_MAJORS; i++)
1740 if (register_blkdev(sd_major(i), "sd") == 0)
1746 err = class_register(&sd_disk_class);
1750 err = scsi_register_driver(&sd_template.gendrv);
1757 class_unregister(&sd_disk_class);
1759 for (i = 0; i < SD_MAJORS; i++)
1760 unregister_blkdev(sd_major(i), "sd");
1765 * exit_sd - exit point for this driver (when it is a module).
1767 * Note: this function unregisters this driver from the scsi mid-level.
1769 static void __exit exit_sd(void)
1773 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
1775 scsi_unregister_driver(&sd_template.gendrv);
1776 class_unregister(&sd_disk_class);
1778 for (i = 0; i < SD_MAJORS; i++)
1779 unregister_blkdev(sd_major(i), "sd");
1782 module_init(init_sd);
1783 module_exit(exit_sd);
1785 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
1786 struct scsi_sense_hdr *sshdr)
1788 sd_printk(KERN_INFO, sdkp, "");
1789 scsi_show_sense_hdr(sshdr);
1790 sd_printk(KERN_INFO, sdkp, "");
1791 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
1794 static void sd_print_result(struct scsi_disk *sdkp, int result)
1796 sd_printk(KERN_INFO, sdkp, "");
1797 scsi_show_result(result);