drivers/serial/cpm_uart/cpm_uart_cpm1.c

   1 /*
   2  *  linux/drivers/serial/cpm_uart.c
   3  *
   4  *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
   5  *
   6  *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
   7  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
   8  *
   9  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  10  *            (C) 2004 Intracom, S.A.
  11  *            (C) 2006 MontaVista Software, Inc.
  12  *              Vitaly Bordug <vbordug@ru.mvista.com>
  13  *
  14  * This program is free software; you can redistribute it and/or modify
  15  * it under the terms of the GNU General Public License as published by
  16  * the Free Software Foundation; either version 2 of the License, or
  17  * (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  27  *
  28  */
  29
  30 #include <linux/module.h>
  31 #include <linux/tty.h>
  32 #include <linux/ioport.h>
  33 #include <linux/init.h>
  34 #include <linux/serial.h>
  35 #include <linux/console.h>
  36 #include <linux/sysrq.h>
  37 #include <linux/device.h>
  38 #include <linux/bootmem.h>
  39 #include <linux/dma-mapping.h>
  40
  41 #include <asm/io.h>
  42 #include <asm/irq.h>
  43 #include <asm/fs_pd.h>
  44
  45 #include <linux/serial_core.h>
  46 #include <linux/kernel.h>
  47
  48 #include <linux/of.h>
  49
  50 #include "cpm_uart.h"
  51
  52 /**************************************************************/
  53
  54 #ifdef CONFIG_PPC_CPM_NEW_BINDING
  55 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
  56 {
  57         cpm_command(port->command, cmd);
  58 }
  59
  60 void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
  61                                 struct device_node *np)
  62 {
  63         return of_iomap(np, 1);
  64 }
  65
  66 void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
  67 {
  68         iounmap(pram);
  69 }
  70
  71 #else
  72 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
  73 {
  74         ushort val;
  75         int line = port - cpm_uart_ports;
  76         volatile cpm8xx_t *cp = cpmp;
  77
  78         switch (line) {
  79         case UART_SMC1:
  80                 val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
  81                 break;
  82         case UART_SMC2:
  83                 val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
  84                 break;
  85         case UART_SCC1:
  86                 val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
  87                 break;
  88         case UART_SCC2:
  89                 val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
  90                 break;
  91         case UART_SCC3:
  92                 val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
  93                 break;
  94         case UART_SCC4:
  95                 val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
  96                 break;
  97         default:
  98                 return;
  99
 100         }
 101         cp->cp_cpcr = val;
 102         while (cp->cp_cpcr & CPM_CR_FLG) ;
 103 }
 104
 105 void smc1_lineif(struct uart_cpm_port *pinfo)
 106 {
 107         pinfo->brg = 1;
 108 }
 109
 110 void smc2_lineif(struct uart_cpm_port *pinfo)
 111 {
 112         pinfo->brg = 2;
 113 }
 114
 115 void scc1_lineif(struct uart_cpm_port *pinfo)
 116 {
 117         /* XXX SCC1: insert port configuration here */
 118         pinfo->brg = 1;
 119 }
 120
 121 void scc2_lineif(struct uart_cpm_port *pinfo)
 122 {
 123         /* XXX SCC2: insert port configuration here */
 124         pinfo->brg = 2;
 125 }
 126
 127 void scc3_lineif(struct uart_cpm_port *pinfo)
 128 {
 129         /* XXX SCC3: insert port configuration here */
 130         pinfo->brg = 3;
 131 }
 132
 133 void scc4_lineif(struct uart_cpm_port *pinfo)
 134 {
 135         /* XXX SCC4: insert port configuration here */
 136         pinfo->brg = 4;
 137 }
 138 #endif
 139
 140 /*
 141  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
 142  * receive buffer descriptors from dual port ram, and a character
 143  * buffer area from host mem. If we are allocating for the console we need
 144  * to do it from bootmem
 145  */
 146 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 147 {
 148         int dpmemsz, memsz;
 149         u8 *dp_mem;
 150         unsigned long dp_offset;
 151         u8 *mem_addr;
 152         dma_addr_t dma_addr = 0;
 153
 154         pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
 155
 156         dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
 157         dp_offset = cpm_dpalloc(dpmemsz, 8);
 158         if (IS_ERR_VALUE(dp_offset)) {
 159                 printk(KERN_ERR
 160                        "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
 161                 return -ENOMEM;
 162         }
 163         dp_mem = cpm_dpram_addr(dp_offset);
 164
 165         memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 166             L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 167         if (is_con) {
 168                 /* was hostalloc but changed cause it blows away the */
 169                 /* large tlb mapping when pinning the kernel area    */
 170                 mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
 171                 dma_addr = (u32)cpm_dpram_phys(mem_addr);
 172         } else
 173                 mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 174                                               GFP_KERNEL);
 175
 176         if (mem_addr == NULL) {
 177                 cpm_dpfree(dp_offset);
 178                 printk(KERN_ERR
 179                        "cpm_uart_cpm1.c: could not allocate coherent memory\n");
 180                 return -ENOMEM;
 181         }
 182
 183         pinfo->dp_addr = dp_offset;
 184         pinfo->mem_addr = mem_addr;             /*  virtual address*/
 185         pinfo->dma_addr = dma_addr;             /*  physical address*/
 186         pinfo->mem_size = memsz;
 187
 188         pinfo->rx_buf = mem_addr;
 189         pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
 190                                                        * pinfo->rx_fifosize);
 191
 192         pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
 193         pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
 194
 195         return 0;
 196 }
 197
 198 void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 199 {
 200         dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
 201                                                pinfo->rx_fifosize) +
 202                           L1_CACHE_ALIGN(pinfo->tx_nrfifos *
 203                                          pinfo->tx_fifosize), pinfo->mem_addr,
 204                           pinfo->dma_addr);
 205
 206         cpm_dpfree(pinfo->dp_addr);
 207 }
 208
 209 #ifndef CONFIG_PPC_CPM_NEW_BINDING
 210 /* Setup any dynamic params in the uart desc */
 211 int cpm_uart_init_portdesc(void)
 212 {
 213         pr_debug("CPM uart[-]:init portdesc\n");
 214
 215         cpm_uart_nr = 0;
 216 #ifdef CONFIG_SERIAL_CPM_SMC1
 217         cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
 218 /*
 219  *  Is SMC1 being relocated?
 220  */
 221 # ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 222         cpm_uart_ports[UART_SMC1].smcup =
 223             (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
 224 # else
 225         cpm_uart_ports[UART_SMC1].smcup =
 226             (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
 227 # endif
 228         cpm_uart_ports[UART_SMC1].port.mapbase =
 229             (unsigned long)&cpmp->cp_smc[0];
 230         cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 231         cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 232         cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
 233         cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
 234 #endif
 235
 236 #ifdef CONFIG_SERIAL_CPM_SMC2
 237         cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
 238         cpm_uart_ports[UART_SMC2].smcup =
 239             (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
 240         cpm_uart_ports[UART_SMC2].port.mapbase =
 241             (unsigned long)&cpmp->cp_smc[1];
 242         cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 243         cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 244         cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
 245         cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
 246 #endif
 247
 248 #ifdef CONFIG_SERIAL_CPM_SCC1
 249         cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
 250         cpm_uart_ports[UART_SCC1].sccup =
 251             (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
 252         cpm_uart_ports[UART_SCC1].port.mapbase =
 253             (unsigned long)&cpmp->cp_scc[0];
 254         cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
 255             ~(UART_SCCM_TX | UART_SCCM_RX);
 256         cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
 257             ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 258         cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
 259         cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
 260 #endif
 261
 262 #ifdef CONFIG_SERIAL_CPM_SCC2
 263         cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
 264         cpm_uart_ports[UART_SCC2].sccup =
 265             (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
 266         cpm_uart_ports[UART_SCC2].port.mapbase =
 267             (unsigned long)&cpmp->cp_scc[1];
 268         cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
 269             ~(UART_SCCM_TX | UART_SCCM_RX);
 270         cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
 271             ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 272         cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
 273         cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
 274 #endif
 275
 276 #ifdef CONFIG_SERIAL_CPM_SCC3
 277         cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
 278         cpm_uart_ports[UART_SCC3].sccup =
 279             (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
 280         cpm_uart_ports[UART_SCC3].port.mapbase =
 281             (unsigned long)&cpmp->cp_scc[2];
 282         cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
 283             ~(UART_SCCM_TX | UART_SCCM_RX);
 284         cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
 285             ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 286         cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
 287         cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
 288 #endif
 289
 290 #ifdef CONFIG_SERIAL_CPM_SCC4
 291         cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
 292         cpm_uart_ports[UART_SCC4].sccup =
 293             (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
 294         cpm_uart_ports[UART_SCC4].port.mapbase =
 295             (unsigned long)&cpmp->cp_scc[3];
 296         cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
 297             ~(UART_SCCM_TX | UART_SCCM_RX);
 298         cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
 299             ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 300         cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
 301         cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
 302 #endif
 303         return 0;
 304 }
 305 #endif