2 * MUSB OTG driver virtual root hub support
4 * Copyright 2005 Mentor Graphics Corporation
5 * Copyright (C) 2005-2006 by Texas Instruments
6 * Copyright (C) 2006-2007 Nokia Corporation
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 #include <linux/module.h>
36 #include <linux/kernel.h>
37 #include <linux/sched.h>
38 #include <linux/slab.h>
39 #include <linux/errno.h>
40 #include <linux/init.h>
41 #include <linux/time.h>
42 #include <linux/timer.h>
44 #include <asm/unaligned.h>
46 #include "musb_core.h"
49 static void musb_port_suspend(struct musb *musb, bool do_suspend)
52 void __iomem *mbase = musb->mregs;
54 if (!is_host_active(musb))
57 /* NOTE: this doesn't necessarily put PHY into low power mode,
58 * turning off its clock; that's a function of PHY integration and
59 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect
60 * SE0 changing to connect (J) or wakeup (K) states.
62 power = musb_readb(mbase, MUSB_POWER);
66 power &= ~MUSB_POWER_RESUME;
67 power |= MUSB_POWER_SUSPENDM;
68 musb_writeb(mbase, MUSB_POWER, power);
70 /* Needed for OPT A tests */
71 power = musb_readb(mbase, MUSB_POWER);
72 while (power & MUSB_POWER_SUSPENDM) {
73 power = musb_readb(mbase, MUSB_POWER);
78 DBG(3, "Root port suspended, power %02x\n", power);
80 musb->port1_status |= USB_PORT_STAT_SUSPEND;
81 switch (musb->xceiv.state) {
82 case OTG_STATE_A_HOST:
83 musb->xceiv.state = OTG_STATE_A_SUSPEND;
84 musb->is_active = is_otg_enabled(musb)
85 && musb->xceiv.host->b_hnp_enable;
86 musb_platform_try_idle(musb, 0);
88 #ifdef CONFIG_USB_MUSB_OTG
89 case OTG_STATE_B_HOST:
90 musb->xceiv.state = OTG_STATE_B_WAIT_ACON;
91 musb->is_active = is_otg_enabled(musb)
92 && musb->xceiv.host->b_hnp_enable;
93 musb_platform_try_idle(musb, 0);
97 DBG(1, "bogus rh suspend? %s\n",
98 otg_state_string(musb));
100 } else if (power & MUSB_POWER_SUSPENDM) {
101 power &= ~MUSB_POWER_SUSPENDM;
102 power |= MUSB_POWER_RESUME;
103 musb_writeb(mbase, MUSB_POWER, power);
105 DBG(3, "Root port resuming, power %02x\n", power);
107 /* later, GetPortStatus will stop RESUME signaling */
108 musb->port1_status |= MUSB_PORT_STAT_RESUME;
109 musb->rh_timer = jiffies + msecs_to_jiffies(20);
113 static void musb_port_reset(struct musb *musb, bool do_reset)
116 void __iomem *mbase = musb->mregs;
118 #ifdef CONFIG_USB_MUSB_OTG
119 if (musb->xceiv.state == OTG_STATE_B_IDLE) {
120 DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n");
121 musb->port1_status &= ~USB_PORT_STAT_RESET;
126 if (!is_host_active(musb))
129 /* NOTE: caller guarantees it will turn off the reset when
130 * the appropriate amount of time has passed
132 power = musb_readb(mbase, MUSB_POWER);
136 * If RESUME is set, we must make sure it stays minimum 20 ms.
137 * Then we must clear RESUME and wait a bit to let musb start
138 * generating SOFs. If we don't do this, OPT HS A 6.8 tests
139 * fail with "Error! Did not receive an SOF before suspend
142 if (power & MUSB_POWER_RESUME) {
143 while (time_before(jiffies, musb->rh_timer))
145 musb_writeb(mbase, MUSB_POWER,
146 power & ~MUSB_POWER_RESUME);
150 musb->ignore_disconnect = true;
152 musb_writeb(mbase, MUSB_POWER,
153 power | MUSB_POWER_RESET);
155 musb->port1_status |= USB_PORT_STAT_RESET;
156 musb->port1_status &= ~USB_PORT_STAT_ENABLE;
157 musb->rh_timer = jiffies + msecs_to_jiffies(50);
159 DBG(4, "root port reset stopped\n");
160 musb_writeb(mbase, MUSB_POWER,
161 power & ~MUSB_POWER_RESET);
163 musb->ignore_disconnect = false;
165 power = musb_readb(mbase, MUSB_POWER);
166 if (power & MUSB_POWER_HSMODE) {
167 DBG(4, "high-speed device connected\n");
168 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED;
171 musb->port1_status &= ~USB_PORT_STAT_RESET;
172 musb->port1_status |= USB_PORT_STAT_ENABLE
173 | (USB_PORT_STAT_C_RESET << 16)
174 | (USB_PORT_STAT_C_ENABLE << 16);
175 usb_hcd_poll_rh_status(musb_to_hcd(musb));
177 musb->vbuserr_retry = VBUSERR_RETRY_COUNT;
181 void musb_root_disconnect(struct musb *musb)
183 musb->port1_status = (1 << USB_PORT_FEAT_POWER)
184 | (1 << USB_PORT_FEAT_C_CONNECTION);
186 usb_hcd_poll_rh_status(musb_to_hcd(musb));
189 switch (musb->xceiv.state) {
190 case OTG_STATE_A_HOST:
191 case OTG_STATE_A_SUSPEND:
192 musb->xceiv.state = OTG_STATE_A_WAIT_BCON;
194 case OTG_STATE_A_WAIT_VFALL:
195 musb->xceiv.state = OTG_STATE_B_IDLE;
198 DBG(1, "host disconnect (%s)\n", otg_state_string(musb));
203 /*---------------------------------------------------------------------*/
205 int musb_hub_status_data(struct usb_hcd *hcd, char *buf)
207 struct musb *musb = hcd_to_musb(hcd);
210 /* called in_irq() via usb_hcd_poll_rh_status() */
211 if (musb->port1_status & 0xffff0000) {
218 int musb_hub_control(
226 struct musb *musb = hcd_to_musb(hcd);
231 if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
234 /* hub features: always zero, setting is a NOP
235 * port features: reported, sometimes updated when host is active
238 spin_lock_irqsave(&musb->lock, flags);
240 case ClearHubFeature:
243 case C_HUB_OVER_CURRENT:
244 case C_HUB_LOCAL_POWER:
250 case ClearPortFeature:
255 case USB_PORT_FEAT_ENABLE:
257 case USB_PORT_FEAT_SUSPEND:
258 musb_port_suspend(musb, false);
260 case USB_PORT_FEAT_POWER:
261 if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
262 musb_set_vbus(musb, 0);
264 case USB_PORT_FEAT_C_CONNECTION:
265 case USB_PORT_FEAT_C_ENABLE:
266 case USB_PORT_FEAT_C_OVER_CURRENT:
267 case USB_PORT_FEAT_C_RESET:
268 case USB_PORT_FEAT_C_SUSPEND:
273 DBG(5, "clear feature %d\n", wValue);
274 musb->port1_status &= ~(1 << wValue);
276 case GetHubDescriptor:
278 struct usb_hub_descriptor *desc = (void *)buf;
280 desc->bDescLength = 9;
281 desc->bDescriptorType = 0x29;
283 desc->wHubCharacteristics = __constant_cpu_to_le16(
284 0x0001 /* per-port power switching */
285 | 0x0010 /* no overcurrent reporting */
287 desc->bPwrOn2PwrGood = 5; /* msec/2 */
288 desc->bHubContrCurrent = 0;
290 /* workaround bogus struct definition */
291 desc->DeviceRemovable[0] = 0x02; /* port 1 */
292 desc->DeviceRemovable[1] = 0xff;
297 *(__le32 *) buf = cpu_to_le32 (temp);
303 /* finish RESET signaling? */
304 if ((musb->port1_status & USB_PORT_STAT_RESET)
305 && time_after(jiffies, musb->rh_timer))
306 musb_port_reset(musb, false);
308 /* finish RESUME signaling? */
309 if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
310 && time_after(jiffies, musb->rh_timer)) {
313 power = musb_readb(musb->mregs, MUSB_POWER);
314 power &= ~MUSB_POWER_RESUME;
315 DBG(4, "root port resume stopped, power %02x\n",
317 musb_writeb(musb->mregs, MUSB_POWER, power);
319 /* ISSUE: DaVinci (RTL 1.300) disconnects after
320 * resume of high speed peripherals (but not full
325 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
326 | MUSB_PORT_STAT_RESUME);
327 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
328 usb_hcd_poll_rh_status(musb_to_hcd(musb));
329 /* NOTE: it might really be A_WAIT_BCON ... */
330 musb->xceiv.state = OTG_STATE_A_HOST;
333 put_unaligned(cpu_to_le32(musb->port1_status
334 & ~MUSB_PORT_STAT_RESUME),
337 /* port change status is more interesting */
338 DBG(get_unaligned((u16*)(buf+2)) ? 2 : 5, "port status %08x\n",
342 if ((wIndex & 0xff) != 1)
346 case USB_PORT_FEAT_POWER:
347 /* NOTE: this controller has a strange state machine
348 * that involves "requesting sessions" according to
349 * magic side effects from incompletely-described
350 * rules about startup...
352 * This call is what really starts the host mode; be
353 * very careful about side effects if you reorder any
354 * initialization logic, e.g. for OTG, or change any
355 * logic relating to VBUS power-up.
357 if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
360 case USB_PORT_FEAT_RESET:
361 musb_port_reset(musb, true);
363 case USB_PORT_FEAT_SUSPEND:
364 musb_port_suspend(musb, true);
366 case USB_PORT_FEAT_TEST:
367 if (unlikely(is_host_active(musb)))
373 pr_debug("TEST_J\n");
377 pr_debug("TEST_K\n");
381 pr_debug("TEST_SE0_NAK\n");
382 temp = MUSB_TEST_SE0_NAK;
385 pr_debug("TEST_PACKET\n");
386 temp = MUSB_TEST_PACKET;
387 musb_load_testpacket(musb);
390 pr_debug("TEST_FORCE_ENABLE\n");
391 temp = MUSB_TEST_FORCE_HOST
392 | MUSB_TEST_FORCE_HS;
394 musb_writeb(musb->mregs, MUSB_DEVCTL,
395 MUSB_DEVCTL_SESSION);
398 pr_debug("TEST_FIFO_ACCESS\n");
399 temp = MUSB_TEST_FIFO_ACCESS;
404 musb_writeb(musb->mregs, MUSB_TESTMODE, temp);
409 DBG(5, "set feature %d\n", wValue);
410 musb->port1_status |= 1 << wValue;
415 /* "protocol stall" on error */
418 spin_unlock_irqrestore(&musb->lock, flags);