4 bool "PCI sound devices"
8 Support for sound devices connected via the PCI bus.
13 tristate "Analog Devices AD1889"
16 Say Y here to include support for the integrated AC97 sound
17 device found in particular on the Hewlett-Packard [BCJ]-xxx0
18 class PA-RISC workstations, using the AD1819 codec.
20 To compile this as a module, choose M here: the module
21 will be called snd-ad1889.
24 tristate "Avance Logic ALS300/ALS300+"
29 Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
31 To compile this driver as a module, choose M here: the module
32 will be called snd-als300
35 tristate "Avance Logic ALS4000"
36 depends on ISA_DMA_API
38 select SND_MPU401_UART
42 Say Y here to include support for soundcards based on Avance Logic
45 To compile this driver as a module, choose M here: the module
46 will be called snd-als4000.
49 tristate "ALi M5451 PCI Audio Controller"
50 select SND_MPU401_UART
53 Say Y here to include support for the integrated AC97 sound
54 device on motherboards using the ALi M5451 Audio Controller
55 (M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets
56 use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
58 To compile this driver as a module, choose M here: the module
59 will be called snd-ali5451.
62 tristate "ATI IXP AC97 Controller"
65 Say Y here to include support for the integrated AC97 sound
66 device on motherboards with ATI chipsets (ATI IXP 150/200/250/
69 To compile this driver as a module, choose M here: the module
70 will be called snd-atiixp.
72 config SND_ATIIXP_MODEM
73 tristate "ATI IXP Modem"
76 Say Y here to include support for the integrated MC97 modem on
77 motherboards with ATI chipsets (ATI IXP 150/200/250).
79 To compile this driver as a module, choose M here: the module
80 will be called snd-atiixp-modem.
83 tristate "Aureal Advantage"
84 select SND_MPU401_UART
87 Say Y here to include support for Aureal Advantage soundcards.
89 Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
90 3D support code is in place, but not yet useable. For more info,
91 email the ALSA developer list, or <mjander@users.sourceforge.net>.
93 To compile this driver as a module, choose M here: the module
94 will be called snd-au8810.
97 tristate "Aureal Vortex"
98 select SND_MPU401_UART
101 Say Y here to include support for Aureal Vortex soundcards.
103 Supported features: Hardware Mixer and SRC. For more info, email
104 the ALSA developer list, or <mjander@users.sourceforge.net>.
106 To compile this driver as a module, choose M here: the module
107 will be called snd-au8820.
110 tristate "Aureal Vortex 2"
111 select SND_MPU401_UART
112 select SND_AC97_CODEC
114 Say Y here to include support for Aureal Vortex 2 soundcards.
116 Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
117 3D support code is in place, but not yet useable. For more info,
118 email the ALSA developer list, or <mjander@users.sourceforge.net>.
120 To compile this driver as a module, choose M here: the module
121 will be called snd-au8830.
124 tristate "Emagic Audiowerk 2"
126 Say Y here to include support for Emagic Audiowerk 2 soundcards.
128 Supported features: Analog and SPDIF output. Analog or SPDIF input.
129 Note: Switch between analog and digital input does not always work.
130 It can produce continuous noise. The workaround is to switch again
131 (and again) between digital and analog input until it works.
133 To compile this driver as a module, choose M here: the module
134 will be called snd-aw2.
138 tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
139 depends on EXPERIMENTAL
141 select SND_MPU401_UART
144 Say Y here to include support for Aztech AZF3328 (PCI168)
147 To compile this driver as a module, choose M here: the module
148 will be called snd-azt3328.
151 tristate "Bt87x Audio Capture"
154 If you want to record audio from TV cards based on
155 Brooktree Bt878/Bt879 chips, say Y here and read
156 <file:Documentation/sound/alsa/Bt87x.txt>.
158 To compile this driver as a module, choose M here: the module
159 will be called snd-bt87x.
161 config SND_BT87X_OVERCLOCK
162 bool "Bt87x Audio overclocking"
165 Say Y here if 448000 Hz isn't enough for you and you want to
166 record from the analog input with up to 1792000 Hz.
168 Higher sample rates won't hurt your hardware, but audio
172 tristate "SB Audigy LS / Live 24bit"
173 select SND_AC97_CODEC
177 Say Y here to include support for the Sound Blaster Audigy LS
180 To compile this driver as a module, choose M here: the module
181 will be called snd-ca0106.
184 tristate "C-Media 8338, 8738, 8768, 8770"
186 select SND_MPU401_UART
189 If you want to use soundcards based on C-Media CMI8338, CMI8738,
190 CMI8768 or CMI8770 chips, say Y here and read
191 <file:Documentation/sound/alsa/CMIPCI.txt>.
193 To compile this driver as a module, choose M here: the module
194 will be called snd-cmipci.
196 config SND_OXYGEN_LIB
199 select SND_MPU401_UART
202 tristate "C-Media 8788 (Oxygen)"
203 select SND_OXYGEN_LIB
205 Say Y here to include support for sound cards based on the
206 C-Media CMI8788 (Oxygen HD Audio) chip:
208 * AuzenTech X-Meridian
210 * Club3D Theatron DTS
212 * Razer Barracuda AC-1
215 To compile this driver as a module, choose M here: the module
216 will be called snd-oxygen.
219 tristate "Cirrus Logic (Sound Fusion) CS4281"
222 select SND_AC97_CODEC
224 Say Y here to include support for Cirrus Logic CS4281 chips.
226 To compile this driver as a module, choose M here: the module
227 will be called snd-cs4281.
230 tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
232 select SND_AC97_CODEC
234 Say Y here to include support for Cirrus Logic CS4610/CS4612/
235 CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
237 To compile this driver as a module, choose M here: the module
238 will be called snd-cs46xx.
240 config SND_CS46XX_NEW_DSP
241 bool "Cirrus Logic (Sound Fusion) New DSP support"
242 depends on SND_CS46XX
245 Say Y here to use a new DSP image for SPDIF and dual codecs.
247 This works better than the old code, so say Y.
250 tristate "CS5530 Audio"
251 depends on ISA_DMA_API
254 Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
256 To compile this driver as a module, choose M here: the module
257 will be called snd-cs5530.
259 config SND_CS5535AUDIO
260 tristate "CS5535/CS5536 Audio"
261 depends on X86 && !X86_64
263 select SND_AC97_CODEC
265 Say Y here to include support for audio on CS5535 chips. It is
266 referred to as NS CS5535 IO or AMD CS5535 IO companion in
267 various literature. This driver also supports the CS5536 audio
268 device. However, for both chips, on certain boards, you may
269 need to use ac97_quirk=hp_only if your board has physically
270 mapped headphone out to master output. If that works for you,
271 send lspci -vvv output to the mailing list so that your board
272 can be identified in the quirks list.
274 To compile this driver as a module, choose M here: the module
275 will be called snd-cs5535audio.
278 tristate "(Echoaudio) Darla20"
282 Say 'Y' or 'M' to include support for Echoaudio Darla.
284 To compile this driver as a module, choose M here: the module
285 will be called snd-darla20
288 tristate "(Echoaudio) Gina20"
292 Say 'Y' or 'M' to include support for Echoaudio Gina.
294 To compile this driver as a module, choose M here: the module
295 will be called snd-gina20
298 tristate "(Echoaudio) Layla20"
303 Say 'Y' or 'M' to include support for Echoaudio Layla.
305 To compile this driver as a module, choose M here: the module
306 will be called snd-layla20
309 tristate "(Echoaudio) Darla24"
313 Say 'Y' or 'M' to include support for Echoaudio Darla24.
315 To compile this driver as a module, choose M here: the module
316 will be called snd-darla24
319 tristate "(Echoaudio) Gina24"
323 Say 'Y' or 'M' to include support for Echoaudio Gina24.
325 To compile this driver as a module, choose M here: the module
326 will be called snd-gina24
329 tristate "(Echoaudio) Layla24"
334 Say 'Y' or 'M' to include support for Echoaudio Layla24.
336 To compile this driver as a module, choose M here: the module
337 will be called snd-layla24
340 tristate "(Echoaudio) Mona"
345 Say 'Y' or 'M' to include support for Echoaudio Mona.
347 To compile this driver as a module, choose M here: the module
348 will be called snd-mona
351 tristate "(Echoaudio) Mia"
356 Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
358 To compile this driver as a module, choose M here: the module
359 will be called snd-mia
362 tristate "(Echoaudio) 3G cards"
367 Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
369 To compile this driver as a module, choose M here: the module
370 will be called snd-echo3g
373 tristate "(Echoaudio) Indigo"
377 Say 'Y' or 'M' to include support for Echoaudio Indigo.
379 To compile this driver as a module, choose M here: the module
380 will be called snd-indigo
383 tristate "(Echoaudio) Indigo IO"
387 Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
389 To compile this driver as a module, choose M here: the module
390 will be called snd-indigoio
393 tristate "(Echoaudio) Indigo DJ"
397 Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
399 To compile this driver as a module, choose M here: the module
400 will be called snd-indigodj
403 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
407 select SND_AC97_CODEC
409 Say Y to include support for Sound Blaster PCI 512, Live!,
410 Audigy and E-mu APS (partially supported) soundcards.
412 The confusing multitude of mixer controls is documented in
413 <file:Documentation/sound/alsa/SB-Live-mixer.txt> and
414 <file:Documentation/sound/alsa/Audigy-mixer.txt>.
416 To compile this driver as a module, choose M here: the module
417 will be called snd-emu10k1.
420 tristate "Emu10k1X (Dell OEM Version)"
421 select SND_AC97_CODEC
424 Say Y here to include support for the Dell OEM version of the
427 To compile this driver as a module, choose M here: the module
428 will be called snd-emu10k1x.
431 tristate "(Creative) Ensoniq AudioPCI 1370"
435 Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
437 To compile this driver as a module, choose M here: the module
438 will be called snd-ens1370.
441 tristate "(Creative) Ensoniq AudioPCI 1371/1373"
443 select SND_AC97_CODEC
445 Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
446 Sound Blaster PCI 64 or 128 soundcards.
448 To compile this driver as a module, choose M here: the module
449 will be called snd-ens1371.
452 tristate "ESS ES1938/1946/1969 (Solo-1)"
454 select SND_MPU401_UART
455 select SND_AC97_CODEC
457 Say Y here to include support for soundcards based on ESS Solo-1
458 (ES1938, ES1946, ES1969) chips.
460 To compile this driver as a module, choose M here: the module
461 will be called snd-es1938.
464 tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
465 select SND_MPU401_UART
466 select SND_AC97_CODEC
468 Say Y here to include support for soundcards based on ESS Maestro
471 To compile this driver as a module, choose M here: the module
472 will be called snd-es1968.
475 tristate "ForteMedia FM801"
477 select SND_MPU401_UART
478 select SND_AC97_CODEC
480 Say Y here to include support for soundcards based on the ForteMedia
483 To compile this driver as a module, choose M here: the module
484 will be called snd-fm801.
486 config SND_FM801_TEA575X_BOOL
487 bool "ForteMedia FM801 + TEA5757 tuner"
489 depends on VIDEO_V4L1=y || VIDEO_V4L1=SND_FM801
491 Say Y here to include support for soundcards based on the ForteMedia
492 FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
493 Forte SF256-PCS-02) into the snd-fm801 driver.
495 config SND_FM801_TEA575X
497 depends on SND_FM801_TEA575X_BOOL
501 tristate "Intel HD Audio"
504 select SND_JACK if INPUT=y || INPUT=SND
506 Say Y here to include support for Intel "High Definition
507 Audio" (Azalia) motherboard devices.
509 To compile this driver as a module, choose M here: the module
510 will be called snd-hda-intel.
513 bool "Build hwdep interface for HD-audio driver"
514 depends on SND_HDA_INTEL
517 Say Y here to build a hwdep interface for HD-audio driver.
518 This interface can be used for out-of-band communication
519 with codecs for debugging purposes.
521 config SND_HDA_RECONFIG
522 bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)"
523 depends on SND_HDA_HWDEP && EXPERIMENTAL
525 Say Y here to enable the HD-audio codec re-configuration feature.
526 This adds the sysfs interfaces to allow user to clear the whole
527 codec configuration, change the codec setup, add extra verbs,
528 and re-configure the codec dynamically.
530 config SND_HDA_INPUT_BEEP
531 bool "Support digital beep via input layer"
532 depends on SND_HDA_INTEL
533 depends on INPUT=y || INPUT=SND_HDA_INTEL
535 Say Y here to build a digital beep interface for HD-audio
536 driver. This interface is used to generate digital beeps.
538 config SND_HDA_CODEC_REALTEK
539 bool "Build Realtek HD-audio codec support"
540 depends on SND_HDA_INTEL
543 Say Y here to include Realtek HD-audio codec support in
544 snd-hda-intel driver, such as ALC880.
546 config SND_HDA_CODEC_ANALOG
547 bool "Build Analog Device HD-audio codec support"
548 depends on SND_HDA_INTEL
551 Say Y here to include Analog Device HD-audio codec support in
552 snd-hda-intel driver, such as AD1986A.
554 config SND_HDA_CODEC_SIGMATEL
555 bool "Build IDT/Sigmatel HD-audio codec support"
556 depends on SND_HDA_INTEL
559 Say Y here to include IDT (Sigmatel) HD-audio codec support in
560 snd-hda-intel driver, such as STAC9200.
562 config SND_HDA_CODEC_VIA
563 bool "Build VIA HD-audio codec support"
564 depends on SND_HDA_INTEL
567 Say Y here to include VIA HD-audio codec support in
568 snd-hda-intel driver, such as VT1708.
570 config SND_HDA_CODEC_ATIHDMI
571 bool "Build ATI HDMI HD-audio codec support"
572 depends on SND_HDA_INTEL
575 Say Y here to include ATI HDMI HD-audio codec support in
576 snd-hda-intel driver, such as ATI RS600 HDMI.
578 config SND_HDA_CODEC_NVHDMI
579 bool "Build NVIDIA HDMI HD-audio codec support"
580 depends on SND_HDA_INTEL
583 Say Y here to include NVIDIA HDMI HD-audio codec support in
584 snd-hda-intel driver, such as NVIDIA MCP78 HDMI.
586 config SND_HDA_CODEC_INTELHDMI
587 bool "Build INTEL HDMI HD-audio codec support"
588 depends on SND_HDA_INTEL
591 Say Y here to include INTEL HDMI HD-audio codec support in
592 snd-hda-intel driver, such as Eaglelake integrated HDMI.
596 depends on SND_HDA_CODEC_INTELHDMI
598 config SND_HDA_CODEC_CONEXANT
599 bool "Build Conexant HD-audio codec support"
600 depends on SND_HDA_INTEL
603 Say Y here to include Conexant HD-audio codec support in
604 snd-hda-intel driver, such as CX20549.
606 config SND_HDA_CODEC_CMEDIA
607 bool "Build C-Media HD-audio codec support"
608 depends on SND_HDA_INTEL
611 Say Y here to include C-Media HD-audio codec support in
612 snd-hda-intel driver, such as CMI9880.
614 config SND_HDA_CODEC_SI3054
615 bool "Build Silicon Labs 3054 HD-modem codec support"
616 depends on SND_HDA_INTEL
619 Say Y here to include Silicon Labs 3054 HD-modem codec
620 (and compatibles) support in snd-hda-intel driver.
622 config SND_HDA_GENERIC
623 bool "Enable generic HD-audio codec parser"
624 depends on SND_HDA_INTEL
627 Say Y here to enable the generic HD-audio codec parser
628 in snd-hda-intel driver.
630 config SND_HDA_POWER_SAVE
631 bool "Aggressive power-saving on HD-audio"
632 depends on SND_HDA_INTEL && EXPERIMENTAL
634 Say Y here to enable more aggressive power-saving mode on
635 HD-audio driver. The power-saving timeout can be configured
636 via power_save option or over sysfs on-the-fly.
638 config SND_HDA_POWER_SAVE_DEFAULT
639 int "Default time-out for HD-audio power-save mode"
640 depends on SND_HDA_POWER_SAVE
643 The default time-out value in seconds for HD-audio automatic
644 power-save mode. 0 means to disable the power-save mode.
647 tristate "RME Hammerfall DSP Audio"
652 Say Y here to include support for RME Hammerfall DSP Audio
655 To compile this driver as a module, choose M here: the module
656 will be called snd-hdsp.
659 tristate "RME Hammerfall DSP MADI"
664 Say Y here to include support for RME Hammerfall DSP MADI
667 To compile this driver as a module, choose M here: the module
668 will be called snd-hdspm.
671 tristate "TempoTec HiFier Fantasia"
672 select SND_OXYGEN_LIB
674 Say Y here to include support for the MediaTek/TempoTec HiFier
677 To compile this driver as a module, choose M here: the module
678 will be called snd-hifier.
681 tristate "ICEnsemble ICE1712 (Envy24)"
682 select SND_MPU401_UART
683 select SND_AC97_CODEC
685 Say Y here to include support for soundcards based on the
686 ICE1712 (Envy24) chip.
688 Currently supported hardware is: M-Audio Delta 1010(LT),
689 DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
690 TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88;
691 Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8;
692 Lionstracs Mediastation, Terrasoniq TS 88.
694 To compile this driver as a module, choose M here: the module
695 will be called snd-ice1712.
698 tristate "ICE/VT1724/1720 (Envy24HT/PT)"
700 select SND_AC97_CODEC
703 Say Y here to include support for soundcards based on
704 ICE/VT1724/1720 (Envy24HT/PT) chips.
706 Currently supported hardware is: AMP AUDIO2000; M-Audio
707 Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky,
708 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI;
709 AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules
710 Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal
711 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS,
712 AV-710; Shuttle SN25P.
714 To compile this driver as a module, choose M here: the module
715 will be called snd-ice1724.
718 tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
719 select SND_AC97_CODEC
721 Say Y here to include support for the integrated AC97 sound
722 device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
723 ALi chipsets using the M5455 Audio Controller. (There is a
724 separate driver for ALi M5451 Audio Controllers.)
726 To compile this driver as a module, choose M here: the module
727 will be called snd-intel8x0.
730 tristate "Intel/SiS/nVidia/AMD MC97 Modem"
731 select SND_AC97_CODEC
733 Say Y here to include support for the integrated MC97 modem on
734 motherboards with Intel/SiS/nVidia/AMD chipsets.
736 To compile this driver as a module, choose M here: the module
737 will be called snd-intel8x0m.
740 tristate "Korg 1212 IO"
743 Say Y here to include support for Korg 1212IO soundcards.
745 To compile this driver as a module, choose M here: the module
746 will be called snd-korg1212.
749 tristate "ESS Allegro/Maestro3"
750 select SND_AC97_CODEC
752 Say Y here to include support for soundcards based on ESS Maestro 3
755 To compile this driver as a module, choose M here: the module
756 will be called snd-maestro3.
759 tristate "Digigram miXart"
763 If you want to use Digigram miXart soundcards, say Y here and
764 read <file:Documentation/sound/alsa/MIXART.txt>.
766 To compile this driver as a module, choose M here: the module
767 will be called snd-mixart.
770 tristate "NeoMagic NM256AV/ZX"
771 select SND_AC97_CODEC
773 Say Y here to include support for NeoMagic NM256AV/ZX chips.
775 To compile this driver as a module, choose M here: the module
776 will be called snd-nm256.
779 tristate "Digigram PCXHR"
783 Say Y here to include support for Digigram PCXHR boards.
785 To compile this driver as a module, choose M here: the module
786 will be called snd-pcxhr.
789 tristate "Conexant Riptide"
792 select SND_MPU401_UART
793 select SND_AC97_CODEC
795 Say 'Y' or 'M' to include support for Conexant Riptide chip.
797 To compile this driver as a module, choose M here: the module
798 will be called snd-riptide
801 tristate "RME Digi32, 32/8, 32 PRO"
804 Say Y to include support for RME Digi32, Digi32 PRO and
805 Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
808 To compile this driver as a module, choose M here: the module
809 will be called snd-rme32.
812 tristate "RME Digi96, 96/8, 96/8 PRO"
815 Say Y here to include support for RME Digi96, Digi96/8 and
816 Digi96/8 PRO/PAD/PST soundcards.
818 To compile this driver as a module, choose M here: the module
819 will be called snd-rme96.
822 tristate "RME Digi9652 (Hammerfall)"
825 Say Y here to include support for RME Hammerfall (RME
826 Digi9652/Digi9636) soundcards.
828 To compile this driver as a module, choose M here: the module
829 will be called snd-rme9652.
832 tristate "SiS 7019 Audio Accelerator"
833 depends on X86 && !X86_64
834 select SND_AC97_CODEC
836 Say Y here to include support for the SiS 7019 Audio Accelerator.
838 To compile this driver as a module, choose M here: the module
839 will be called snd-sis7019.
841 config SND_SONICVIBES
842 tristate "S3 SonicVibes"
844 select SND_MPU401_UART
845 select SND_AC97_CODEC
847 Say Y here to include support for soundcards based on the S3
850 To compile this driver as a module, choose M here: the module
851 will be called snd-sonicvibes.
854 tristate "Trident 4D-Wave DX/NX; SiS 7018"
855 select SND_MPU401_UART
856 select SND_AC97_CODEC
858 Say Y here to include support for soundcards based on Trident
859 4D-Wave DX/NX or SiS 7018 chips.
861 To compile this driver as a module, choose M here: the module
862 will be called snd-trident.
865 tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
866 select SND_MPU401_UART
867 select SND_AC97_CODEC
869 Say Y here to include support for the integrated AC97 sound
870 device on motherboards with VIA chipsets.
872 To compile this driver as a module, choose M here: the module
873 will be called snd-via82xx.
875 config SND_VIA82XX_MODEM
876 tristate "VIA 82C686A/B, 8233 based Modems"
877 select SND_AC97_CODEC
879 Say Y here to include support for the integrated MC97 modem on
880 motherboards with VIA chipsets.
882 To compile this driver as a module, choose M here: the module
883 will be called snd-via82xx-modem.
886 tristate "Asus Virtuoso 100/200 (Xonar)"
887 select SND_OXYGEN_LIB
889 Say Y here to include support for sound cards based on the
890 Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
893 To compile this driver as a module, choose M here: the module
894 will be called snd-virtuoso.
897 tristate "Digigram VX222"
900 Say Y here to include support for Digigram VX222 soundcards.
902 To compile this driver as a module, choose M here: the module
903 will be called snd-vx222.
906 tristate "Yamaha YMF724/740/744/754"
908 select SND_MPU401_UART
909 select SND_AC97_CODEC
911 Say Y here to include support for Yamaha PCI audio chips -
912 YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
914 To compile this driver as a module, choose M here: the module
915 will be called snd-ymfpci.