Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6

[linux-2.6-omap-h63xx.git] / Documentation / hwmon / smsc47b397

diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c9643286183750fd978aec69ac78e0633b..20682f15ae410cc7962c1914fe0f959465330f91 100644 (file)
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@ Kernel driver smsc47b397
 
 Supported chips:
   * SMSC LPC47B397-NC
 
 Supported chips:
   * SMSC LPC47B397-NC

+  * SMSC SCH5307-NS

     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file
     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file


@@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
 
 November 23, 2004
 
 
 November 23, 2004
 

-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip

 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 
 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 

+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+

 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.
 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.


@@ -127,7 +131,7 @@ OUT DX,AL
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 

-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)

 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.
 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.