[SCSI] fix netlink kernel-doc

[linux-2.6-omap-h63xx.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 25efbaf1f59bc23ef21cdd3d50731509e06fbeef..dd28a0d56981e4e0376fb5010086c817633a6a3b 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -658,11 +658,12 @@ and is between 256 and 4096 characters. It is defined in the file
        earlyprintk=    [X86-32,X86-64,SH,BLACKFIN]
                        earlyprintk=vga
                        earlyprintk=serial[,ttySn[,baudrate]]
        earlyprintk=    [X86-32,X86-64,SH,BLACKFIN]
                        earlyprintk=vga
                        earlyprintk=serial[,ttySn[,baudrate]]

+                       earlyprintk=dbgp

 
                        Append ",keep" to not disable it when the real console
                        takes over.
 
 
                        Append ",keep" to not disable it when the real console
                        takes over.
 

-                       Only vga or serial at a time, not both.
+                       Only vga or serial or usb debug port at a time.

 
                        Currently only ttyS0 and ttyS1 are supported.
 
 
                        Currently only ttyS0 and ttyS1 are supported.
 


@@ -795,6 +796,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        Defaults to the default architecture's huge page size
                        if not specified.
 
                        Defaults to the default architecture's huge page size
                        if not specified.
 

+       i8042.debug     [HW] Toggle i8042 debug mode

        i8042.direct    [HW] Put keyboard port into non-translated mode
        i8042.dumbkbd   [HW] Pretend that controller can only read data from
                             keyboard and cannot control its state
        i8042.direct    [HW] Put keyboard port into non-translated mode
        i8042.dumbkbd   [HW] Pretend that controller can only read data from
                             keyboard and cannot control its state


@@ -1231,6 +1233,29 @@ and is between 256 and 4096 characters. It is defined in the file
                                 or
                                 memmap=0x10000$0x18690000
 
                                 or
                                 memmap=0x10000$0x18690000
 

+       memory_corruption_check=0/1 [X86]
+                       Some BIOSes seem to corrupt the first 64k of
+                       memory when doing things like suspend/resume.
+                       Setting this option will scan the memory
+                       looking for corruption.  Enabling this will
+                       both detect corruption and prevent the kernel
+                       from using the memory being corrupted.
+                       However, its intended as a diagnostic tool; if
+                       repeatable BIOS-originated corruption always
+                       affects the same memory, you can use memmap=
+                       to prevent the kernel from using that memory.
+
+       memory_corruption_check_size=size [X86]
+                       By default it checks for corruption in the low
+                       64k, making this memory unavailable for normal
+                       use.  Use this parameter to scan for
+                       corruption in more or less memory.
+
+       memory_corruption_check_period=seconds [X86]
+                       By default it checks for corruption every 60
+                       seconds.  Use this parameter to check at some
+                       other rate.  0 disables periodic checking.
+

        memtest=        [KNL,X86] Enable memtest
                        Format: <integer>
                        range: 0,4 : pattern number
        memtest=        [KNL,X86] Enable memtest
                        Format: <integer>
                        range: 0,4 : pattern number


@@ -1689,6 +1714,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        autoconfiguration.
                        Ranges are in pairs (memory base and size).
 
                        autoconfiguration.
                        Ranges are in pairs (memory base and size).
 

+       dynamic_printk
+                       Enables pr_debug()/dev_dbg() calls if
+                       CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. These can also
+                       be switched on/off via <debugfs>/dynamic_printk/modules
+

        print-fatal-signals=
                        [KNL] debug: print fatal signals
                        print-fatal-signals=1: print segfault info to
        print-fatal-signals=
                        [KNL] debug: print fatal signals
                        print-fatal-signals=1: print segfault info to