Create/use more directory structure in the Documentation/ tree.

[linux-2.6-omap-h63xx.git] / drivers / block / Kconfig

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 0d1d2133d9bc239fe800a3e64c05ceef6c1e898a..0344a8a8321d130b3833681708426becdcfa45d1 100644 (file)
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -21,7 +21,8 @@ config BLK_DEV_FD
        ---help---
          If you want to use the floppy disk drive(s) of your PC under Linux,
          say Y. Information about this driver, especially important for IBM
        ---help---
          If you want to use the floppy disk drive(s) of your PC under Linux,
          say Y. Information about this driver, especially important for IBM

-         Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+         Thinkpad users, is contained in
+         <file:Documentation/blockdev/floppy.txt>.

          That file also contains the location of the Floppy driver FAQ as
          well as location of the fdutils package used to configure additional
          parameters of the driver at run time.
          That file also contains the location of the Floppy driver FAQ as
          well as location of the fdutils package used to configure additional
          parameters of the driver at run time.


@@ -76,7 +77,7 @@ config PARIDE
          your computer's parallel port. Most of them are actually IDE devices
          using a parallel port IDE adapter. This option enables the PARIDE
          subsystem which contains drivers for many of these external drives.
          your computer's parallel port. Most of them are actually IDE devices
          using a parallel port IDE adapter. This option enables the PARIDE
          subsystem which contains drivers for many of these external drives.

-         Read <file:Documentation/paride.txt> for more information.
+         Read <file:Documentation/blockdev/paride.txt> for more information.

 
          If you have said Y to the "Parallel-port support" configuration
          option, you may share a single port between your printer and other
 
          If you have said Y to the "Parallel-port support" configuration
          option, you may share a single port between your printer and other


@@ -114,9 +115,9 @@ config BLK_CPQ_DA
        help
          This is the driver for Compaq Smart Array controllers.  Everyone
          using these boards should say Y here.  See the file
        help
          This is the driver for Compaq Smart Array controllers.  Everyone
          using these boards should say Y here.  See the file

-         <file:Documentation/cpqarray.txt> for the current list of boards
-         supported by this driver, and for further information on the use of
-         this driver.
+         <file:Documentation/blockdev/cpqarray.txt> for the current list of
+         boards supported by this driver, and for further information on the
+         use of this driver.

 
 config BLK_CPQ_CISS_DA
        tristate "Compaq Smart Array 5xxx support"
 
 config BLK_CPQ_CISS_DA
        tristate "Compaq Smart Array 5xxx support"


@@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA
        help
          This is the driver for Compaq Smart Array 5xxx controllers.
          Everyone using these boards should say Y here.
        help
          This is the driver for Compaq Smart Array 5xxx controllers.
          Everyone using these boards should say Y here.

-         See <file:Documentation/cciss.txt> for the current list of
+         See <file:Documentation/blockdev/cciss.txt> for the current list of

          boards supported by this driver, and for further information
          on the use of this driver.
 
          boards supported by this driver, and for further information
          on the use of this driver.
 


@@ -135,7 +136,7 @@ config CISS_SCSI_TAPE
        help
          When enabled (Y), this option allows SCSI tape drives and SCSI medium
          changers (tape robots) to be accessed via a Compaq 5xxx array 
        help
          When enabled (Y), this option allows SCSI tape drives and SCSI medium
          changers (tape robots) to be accessed via a Compaq 5xxx array 

-         controller.  (See <file:Documentation/cciss.txt> for more details.)
+         controller.  (See <file:Documentation/blockdev/cciss.txt> for more details.)

 
          "SCSI support" and "SCSI tape support" must also be enabled for this 
          option to work.
 
          "SCSI support" and "SCSI tape support" must also be enabled for this 
          option to work.


@@ -149,8 +150,8 @@ config BLK_DEV_DAC960
        help
          This driver adds support for the Mylex DAC960, AcceleRAID, and
          eXtremeRAID PCI RAID controllers.  See the file
        help
          This driver adds support for the Mylex DAC960, AcceleRAID, and
          eXtremeRAID PCI RAID controllers.  See the file

-         <file:Documentation/README.DAC960> for further information about
-         this driver.
+         <file:Documentation/blockdev/README.DAC960> for further information
+         about this driver.

 
          To compile this driver as a module, choose M here: the
          module will be called DAC960.
 
          To compile this driver as a module, choose M here: the
          module will be called DAC960.


@@ -278,9 +279,9 @@ config BLK_DEV_NBD
          userland (making server and client physically the same computer,
          communicating using the loopback network device).
 
          userland (making server and client physically the same computer,
          communicating using the loopback network device).
 

-         Read <file:Documentation/nbd.txt> for more information, especially
-         about where to find the server code, which runs in user space and
-         does not need special kernel support.
+         Read <file:Documentation/blockdev/nbd.txt> for more information,
+         especially about where to find the server code, which runs in user
+         space and does not need special kernel support.

 
          Note that this has nothing to do with the network file systems NFS
          or Coda; you can say N here even if you intend to use NFS or Coda.
 
          Note that this has nothing to do with the network file systems NFS
          or Coda; you can say N here even if you intend to use NFS or Coda.


@@ -321,8 +322,8 @@ config BLK_DEV_RAM
          store a copy of a minimal root file system off of a floppy into RAM
          during the initial install of Linux.
 
          store a copy of a minimal root file system off of a floppy into RAM
          during the initial install of Linux.
 

-         Note that the kernel command line option "ramdisk=XX" is now
-         obsolete. For details, read <file:Documentation/ramdisk.txt>.
+         Note that the kernel command line option "ramdisk=XX" is now obsolete.
+         For details, read <file:Documentation/blockdev/ramdisk.txt>.

 
          To compile this driver as a module, choose M here: the
          module will be called rd.
 
          To compile this driver as a module, choose M here: the
          module will be called rd.


@@ -433,4 +434,16 @@ config VIRTIO_BLK
          This is the virtual block driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
          This is the virtual block driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 

+config BLK_DEV_HD
+       bool "Very old hard disk (MFM/RLL/IDE) driver"
+       depends on HAVE_IDE
+       depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
+       help
+         This is a very old hard disk driver that lacks the enhanced
+         functionality of the newer ones.
+
+         It is required for systems with ancient MFM/RLL/ESDI drives.
+
+         If unsure, say N.
+

 endif # BLK_DEV
 endif # BLK_DEV