-menu "Hardware Sensors Chip support"
- depends on I2C
-
-config I2C_SENSOR
- tristate
- default n
-
-config SENSORS_ADM1021
- tristate "Analog Devices ADM1021 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1021
- and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
- Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
- and the XEON processor built-in sensor.
-
- This driver can also be built as a module. If so, the module
- will be called adm1021.
-
-config SENSORS_ADM1025
- tristate "Analog Devices ADM1025 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1025
- and Philips NE1619 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm1025.
-
-config SENSORS_ADM1026
- tristate "Analog Devices ADM1026 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1026
- sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called adm1026.
-
-config SENSORS_ADM1031
- tristate "Analog Devices ADM1031 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM1031
- and ADM1030 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm1031.
-
-config SENSORS_ADM9240
- tristate "Analog Devices ADM9240 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Analog Devices ADM9240,
- Dallas DS1780, National Semiconductor LM81 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called adm9240.
-
-config SENSORS_ASB100
- tristate "Asus ASB100 Bach"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the ASB100 Bach sensor
- chip found on some Asus mainboards.
-
- This driver can also be built as a module. If so, the module
- will be called asb100.
-
-config SENSORS_ATXP1
- tristate "Attansic ATXP1 VID controller"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for the Attansic ATXP1 VID
- controller.
-
- If your board have such a chip, you are able to control your CPU
- core and other voltages.
-
- This driver can also be built as a module. If so, the module
- will be called atxp1.
-
-config SENSORS_DS1621
- tristate "Dallas Semiconductor DS1621 and DS1625"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1621 and DS1625 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called ds1621.
-
-config SENSORS_FSCHER
- tristate "FSC Hermes"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
-config SENSORS_GL518SM
- tristate "Genesys Logic GL518SM"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for Genesys Logic GL518SM
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called gl518sm.
-
-config SENSORS_GL520SM
- tristate "Genesys Logic GL520SM"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for Genesys Logic GL520SM
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called gl520sm.
-
-config SENSORS_IT87
- tristate "ITE IT87xx and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for ITE IT87xx sensor chips
- and clones: SiS960.
-
- This driver can also be built as a module. If so, the module
- will be called it87.
-
-config SENSORS_LM63
- tristate "National Semiconductor LM63"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the National Semiconductor
- LM63 remote diode digital temperature sensor with integrated fan
- control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
- motherboard, among others.
-
- This driver can also be built as a module. If so, the module
- will be called lm63.
-
-config SENSORS_LM75
- tristate "National Semiconductor LM75 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
-
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
-
- This driver can also be built as a module. If so, the module
- will be called lm75.
-
-config SENSORS_LM77
- tristate "National Semiconductor LM77"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM77
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm77.
-
-config SENSORS_LM78
- tristate "National Semiconductor LM78 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM78,
- LM78-J and LM79.
-
- This driver can also be built as a module. If so, the module
- will be called lm78.
-
-config SENSORS_LM80
- tristate "National Semiconductor LM80"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor
- LM80 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm80.
-
-config SENSORS_LM83
- tristate "National Semiconductor LM83"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor
- LM83 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm83.
-
-config SENSORS_LM85
- tristate "National Semiconductor LM85 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM85
- sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
-
- This driver can also be built as a module. If so, the module
- will be called lm85.
-
-config SENSORS_LM87
- tristate "National Semiconductor LM87"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM87
- sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm87.
-
-config SENSORS_LM90
- tristate "National Semiconductor LM90 and compatibles"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM90,
- LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
- MAX6658 sensor chips.
-
- The Analog Devices ADT7461 sensor chip is also supported, but only
- if found in ADM1032 compatibility mode.
-
- This driver can also be built as a module. If so, the module
- will be called lm90.
-
-config SENSORS_LM92
- tristate "National Semiconductor LM92 and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for National Semiconductor LM92
- and Maxim MAX6635 sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called lm92.
-
-config SENSORS_MAX1619
- tristate "Maxim MAX1619 sensor chip"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for MAX1619 sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called max1619.
-
-config SENSORS_PC87360
- tristate "National Semiconductor PC87360 family"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get access to the hardware monitoring
- functions of the National Semiconductor PC8736x Super-I/O chips.
- The PC87360, PC87363 and PC87364 only have fan monitoring and
- control. The PC87365 and PC87366 additionally have voltage and
- temperature monitoring.
-
- This driver can also be built as a module. If so, the module
- will be called pc87360.
-
-config SENSORS_SMSC47B397
- tristate "SMSC LPC47B397-NC"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the SMSC LPC47B397-NC
- sensor chip.
-
- This driver can also be built as a module. If so, the module
- will be called smsc47b397.
-
-config SENSORS_SIS5595
- tristate "Silicon Integrated Systems Corp. SiS5595"
- depends on I2C && PCI && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated sensors in
- SiS5595 South Bridges.
-
- This driver can also be built as a module. If so, the module
- will be called sis5595.
-
-config SENSORS_SMSC47M1
- tristate "SMSC LPC47M10x and compatibles"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated fan
- monitoring and control capabilities of the SMSC LPC47B27x,
- LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
-
- This driver can also be built as a module. If so, the module
- will be called smsc47m1.
-
-config SENSORS_VIA686A
- tristate "VIA686A"
- depends on I2C && PCI
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the integrated sensors in
- Via 686A/B South Bridges.
-
- This driver can also be built as a module. If so, the module
- will be called via686a.
-
-config SENSORS_W83781D
- tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
- depends on I2C
- select I2C_SENSOR
- help
- If you say yes here you get support for the Winbond W8378x series
- of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
- and the similar Asus AS99127F.
-
- This driver can also be built as a module. If so, the module
- will be called w83781d.
-
-config SENSORS_W83L785TS
- tristate "Winbond W83L785TS-S"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- help
- If you say yes here you get support for the Winbond W83L785TS-S
- sensor chip, which is used on the Asus A7N8X, among other
- motherboards.
-
- This driver can also be built as a module. If so, the module
- will be called w83l785ts.
-
-config SENSORS_W83627HF
- tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get support for the Winbond W836X7 series
- of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
-
- This driver can also be built as a module. If so, the module
- will be called w83627hf.
-
-config SENSORS_W83627EHF
- tristate "Winbond W83627EHF"
- depends on I2C && EXPERIMENTAL
- select I2C_SENSOR
- select I2C_ISA
- help
- If you say yes here you get preliminary support for the hardware
- monitoring functionality of the Winbond W83627EHF Super-I/O chip.
- Only fan and temperature inputs are supported at the moment, while
- the chip does much more than that.
-
- This driver can also be built as a module. If so, the module
- will be called w83627ehf.
-
-endmenu
-
-menu "Other I2C Chip support"