- * + USB host-to-host "network cables", used for IP-over-USB links.
- * These are often used for Laplink style connectivity products.
- * - AnchorChip 2720
- * - Belkin, eTEK (interops with Win32 drivers)
- * - GeneSys GL620USB-A
- * - NetChip 1080 (interoperates with NetChip Win32 drivers)
- * - Prolific PL-2301/2302 (replaces "plusb" driver)
- * - KC Technology KC2190
- *
- * + Smart USB devices can support such links directly, using Internet
- * standard protocols instead of proprietary host-to-device links.
- * - Linux PDAs like iPaq, Yopy, and Zaurus
- * - The BLOB boot loader (for diskless booting)
- * - Linux "gadgets", perhaps using PXA-2xx or Net2280 controllers
- * - Devices using EPSON's sample USB firmware
- * - CDC-Ethernet class devices, such as many cable modems
- *
- * + Adapters to networks such as Ethernet.
- * - AX8817X based USB 2.0 products
- *
- * Links to these devices can be bridged using Linux Ethernet bridging.
- * With minor exceptions, these all use similar USB framing for network
- * traffic, but need different protocols for control traffic.
- *
- * USB devices can implement their side of this protocol at the cost
- * of two bulk endpoints; it's not restricted to "cable" applications.
- * See the SA1110, Zaurus, or EPSON device/client support in this driver;
- * slave/target drivers such as "usb-eth" (on most SA-1100 PDAs) or
- * "g_ether" (in the Linux "gadget" framework) implement that behavior
- * within devices.
- *
- *
- * CHANGELOG:
- *
- * 13-sep-2000 experimental, new
- * 10-oct-2000 usb_device_id table created.
- * 28-oct-2000 misc fixes; mostly, discard more TTL-mangled rx packets.
- * 01-nov-2000 usb_device_id table and probing api update by
- * Adam J. Richter <adam@yggdrasil.com>.
- * 18-dec-2000 (db) tx watchdog, "net1080" renaming to "usbnet", device_info
- * and prolific support, isolate net1080-specific bits, cleanup.
- * fix unlink_urbs oops in D3 PM resume code path.
- *
- * 02-feb-2001 (db) fix tx skb sharing, packet length, match_flags, ...
- * 08-feb-2001 stubbed in "linuxdev", maybe the SA-1100 folk can use it;
- * AnchorChips 2720 support (from spec) for testing;
- * fix bit-ordering problem with ethernet multicast addr
- * 19-feb-2001 Support for clearing halt conditions. SA1100 UDC support
- * updates. Oleg Drokin (green@iXcelerator.com)
- * 25-mar-2001 More SA-1100 updates, including workaround for ip problem
- * expecting cleared skb->cb and framing change to match latest
- * handhelds.org version (Oleg). Enable device IDs from the
- * Win32 Belkin driver; other cleanups (db).
- * 16-jul-2001 Bugfixes for uhci oops-on-unplug, Belkin support, various
- * cleanups for problems not yet seen in the field. (db)
- * 17-oct-2001 Handle "Advance USBNET" product, like Belkin/eTEK devices,
- * from Ioannis Mavroukakis <i.mavroukakis@btinternet.com>;
- * rx unlinks somehow weren't async; minor cleanup.
- * 03-nov-2001 Merged GeneSys driver; original code from Jiun-Jie Huang
- * <huangjj@genesyslogic.com.tw>, updated by Stanislav Brabec
- * <utx@penguin.cz>. Made framing options (NetChip/GeneSys)
- * tie mostly to (sub)driver info. Workaround some PL-2302
- * chips that seem to reject SET_INTERFACE requests.
- *
- * 06-apr-2002 Added ethtool support, based on a patch from Brad Hards.
- * Level of diagnostics is more configurable; they use device
- * location (usb_device->devpath) instead of address (2.5).
- * For tx_fixup, memflags can't be NOIO.
- * 07-may-2002 Generalize/cleanup keventd support, handling rx stalls (mostly
- * for USB 2.0 TTs) and memory shortages (potential) too. (db)
- * Use "locally assigned" IEEE802 address space. (Brad Hards)
- * 18-oct-2002 Support for Zaurus (Pavel Machek), related cleanup (db).
- * 14-dec-2002 Remove Zaurus-private crc32 code (Pavel); 2.5 oops fix,
- * cleanups and stubbed PXA-250 support (db), fix for framing
- * issues on Z, net1080, and gl620a (Toby Milne)
- *
- * 31-mar-2003 Use endpoint descriptors: high speed support, simpler sa1100
- * vs pxa25x, and CDC Ethernet. Throttle down log floods on
- * disconnect; other cleanups. (db) Flush net1080 fifos
- * after several sequential framing errors. (Johannes Erdfelt)
- * 22-aug-2003 AX8817X support (Dave Hollis).
- * 14-jun-2004 Trivial patch for AX8817X based Buffalo LUA-U2-KTX in Japan
- * (Neil Bortnak)
- * 03-nov-2004 Trivial patch for KC2190 (KC-190) chip. (Jonathan McDowell)
- *
- * 01-feb-2005 AX88772 support (Phil Chang & Dave Hollis)
- *-------------------------------------------------------------------------*/
-
-// #define DEBUG // error path messages, extra info
-// #define VERBOSE // more; success messages
-
-#include <linux/config.h>
-#ifdef CONFIG_USB_DEBUG
-# define DEBUG
-#endif
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/unaligned.h>
-
-#include "usbnet.h"
-
-#define DRIVER_VERSION "22-Aug-2005"
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
- * Several dozen bytes of IPv4 data can fit in two such transactions.
- * One maximum size Ethernet packet takes twenty four of them.
- * For high speed, each frame comfortably fits almost 36 max size
- * Ethernet packets (so queues should be bigger).
- *
- * REVISIT qlens should be members of 'struct usbnet'; the goal is to
- * let the USB host controller be busy for 5msec or more before an irq
- * is required, under load. Jumbograms change the equation.
- */
-#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-
-// reawaken network queue this soon after stopping; else watchdog barks
-#define TX_TIMEOUT_JIFFIES (5*HZ)
-
-// throttle rx/tx briefly after some faults, so khubd might disconnect()
-// us (it polls at HZ/4 usually) before we report too many false errors.
-#define THROTTLE_JIFFIES (HZ/8)
-
-// for vendor-specific control operations
-#define CONTROL_TIMEOUT_MS USB_CTRL_GET_TIMEOUT
-
-// between wakeups
-#define UNLINK_TIMEOUT_MS 3
-
-/*-------------------------------------------------------------------------*/
-
-// randomly generated ethernet address
-static u8 node_id [ETH_ALEN];
-
-static const char driver_name [] = "usbnet";
-
-/* use ethtool to change the level for any given device */
-static int msg_level = -1;
-module_param (msg_level, int, 0);
-MODULE_PARM_DESC (msg_level, "Override default message level");
-
-/*-------------------------------------------------------------------------*/
-
-static u32 usbnet_get_link (struct net_device *);
-
-/* mostly for PDA style devices, which are always connected if present */
-static int always_connected (struct usbnet *dev)
-{
- return 0;
-}
-
-/* handles CDC Ethernet and many other network "bulk data" interfaces */
-int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
-{
- int tmp;
- struct usb_host_interface *alt = NULL;
- struct usb_host_endpoint *in = NULL, *out = NULL;
- struct usb_host_endpoint *status = NULL;
-
- for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
- unsigned ep;
-
- in = out = status = NULL;
- alt = intf->altsetting + tmp;
-
- /* take the first altsetting with in-bulk + out-bulk;
- * remember any status endpoint, just in case;
- * ignore other endpoints and altsetttings.
- */
- for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
- struct usb_host_endpoint *e;
- int intr = 0;
-
- e = alt->endpoint + ep;
- switch (e->desc.bmAttributes) {
- case USB_ENDPOINT_XFER_INT:
- if (!(e->desc.bEndpointAddress & USB_DIR_IN))
- continue;
- intr = 1;
- /* FALLTHROUGH */
- case USB_ENDPOINT_XFER_BULK:
- break;
- default:
- continue;
- }
- if (e->desc.bEndpointAddress & USB_DIR_IN) {
- if (!intr && !in)
- in = e;
- else if (intr && !status)
- status = e;
- } else {
- if (!out)
- out = e;
- }
- }
- if (in && out)
- break;
- }
- if (!alt || !in || !out)
- return -EINVAL;
-
- if (alt->desc.bAlternateSetting != 0
- || !(dev->driver_info->flags & FLAG_NO_SETINT)) {
- tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
- alt->desc.bAlternateSetting);
- if (tmp < 0)
- return tmp;
- }
-
- dev->in = usb_rcvbulkpipe (dev->udev,
- in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
- dev->out = usb_sndbulkpipe (dev->udev,
- out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
- dev->status = status;
- return 0;
-}
-EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
-
-static void intr_complete (struct urb *urb, struct pt_regs *regs);
-
-static int init_status (struct usbnet *dev, struct usb_interface *intf)
-{
- char *buf = NULL;
- unsigned pipe = 0;
- unsigned maxp;
- unsigned period;
-
- if (!dev->driver_info->status)
- return 0;
-
- pipe = usb_rcvintpipe (dev->udev,
- dev->status->desc.bEndpointAddress
- & USB_ENDPOINT_NUMBER_MASK);
- maxp = usb_maxpacket (dev->udev, pipe, 0);
-
- /* avoid 1 msec chatter: min 8 msec poll rate */
- period = max ((int) dev->status->desc.bInterval,
- (dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
-
- buf = kmalloc (maxp, SLAB_KERNEL);
- if (buf) {
- dev->interrupt = usb_alloc_urb (0, SLAB_KERNEL);
- if (!dev->interrupt) {
- kfree (buf);
- return -ENOMEM;
- } else {
- usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
- buf, maxp, intr_complete, dev, period);
- dev_dbg(&intf->dev,
- "status ep%din, %d bytes period %d\n",
- usb_pipeendpoint(pipe), maxp, period);
- }
- }
- return 0;
-}
-
-/* Passes this packet up the stack, updating its accounting.
- * Some link protocols batch packets, so their rx_fixup paths
- * can return clones as well as just modify the original skb.
- */
-void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
-{
- int status;
-
- skb->dev = dev->net;
- skb->protocol = eth_type_trans (skb, dev->net);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
-
- if (netif_msg_rx_status (dev))
- devdbg (dev, "< rx, len %zu, type 0x%x",
- skb->len + sizeof (struct ethhdr), skb->protocol);
- memset (skb->cb, 0, sizeof (struct skb_data));
- status = netif_rx (skb);
- if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
- devdbg (dev, "netif_rx status %d", status);
-}
-EXPORT_SYMBOL_GPL(usbnet_skb_return);
-
-\f
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class declarations.
- * Used by CDC Ethernet, and some CDC variants
- *
- *-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_CDCETHER
-#define NEED_GENERIC_CDC
-#endif
-
-#ifdef CONFIG_USB_ZAURUS
-/* Ethernet variant uses funky framing, broken ethernet addressing */
-#define NEED_GENERIC_CDC
-#endif
-
-#ifdef CONFIG_USB_RNDIS
-/* ACM variant uses even funkier framing, complex control RPC scheme */
-#define NEED_GENERIC_CDC
-#endif
-
-
-#ifdef NEED_GENERIC_CDC
-
-#include <linux/usb_cdc.h>
-
-struct cdc_state {
- struct usb_cdc_header_desc *header;
- struct usb_cdc_union_desc *u;
- struct usb_cdc_ether_desc *ether;
- struct usb_interface *control;
- struct usb_interface *data;
-};
-
-static struct usb_driver usbnet_driver;
-
-/*
- * probes control interface, claims data interface, collects the bulk
- * endpoints, activates data interface (if needed), maybe sets MTU.
- * all pure cdc, except for certain firmware workarounds.
- */
-static int generic_cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- u8 *buf = intf->cur_altsetting->extra;
- int len = intf->cur_altsetting->extralen;
- struct usb_interface_descriptor *d;
- struct cdc_state *info = (void *) &dev->data;
- int status;
- int rndis;
-
- if (sizeof dev->data < sizeof *info)
- return -EDOM;
-
- /* expect strict spec conformance for the descriptors, but
- * cope with firmware which stores them in the wrong place
- */
- if (len == 0 && dev->udev->actconfig->extralen) {
- /* Motorola SB4100 (and others: Brad Hards says it's
- * from a Broadcom design) put CDC descriptors here
- */
- buf = dev->udev->actconfig->extra;
- len = dev->udev->actconfig->extralen;
- if (len)
- dev_dbg (&intf->dev,
- "CDC descriptors on config\n");
- }
-
- /* this assumes that if there's a non-RNDIS vendor variant
- * of cdc-acm, it'll fail RNDIS requests cleanly.
- */
- rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
-
- memset (info, 0, sizeof *info);
- info->control = intf;
- while (len > 3) {
- if (buf [1] != USB_DT_CS_INTERFACE)
- goto next_desc;
-
- /* use bDescriptorSubType to identify the CDC descriptors.
- * We expect devices with CDC header and union descriptors.
- * For CDC Ethernet we need the ethernet descriptor.
- * For RNDIS, ignore two (pointless) CDC modem descriptors
- * in favor of a complicated OID-based RPC scheme doing what
- * CDC Ethernet achieves with a simple descriptor.
- */
- switch (buf [2]) {
- case USB_CDC_HEADER_TYPE:
- if (info->header) {
- dev_dbg (&intf->dev, "extra CDC header\n");
- goto bad_desc;
- }
- info->header = (void *) buf;
- if (info->header->bLength != sizeof *info->header) {
- dev_dbg (&intf->dev, "CDC header len %u\n",
- info->header->bLength);
- goto bad_desc;
- }
- break;
- case USB_CDC_UNION_TYPE:
- if (info->u) {
- dev_dbg (&intf->dev, "extra CDC union\n");
- goto bad_desc;
- }
- info->u = (void *) buf;
- if (info->u->bLength != sizeof *info->u) {
- dev_dbg (&intf->dev, "CDC union len %u\n",
- info->u->bLength);
- goto bad_desc;
- }
-
- /* we need a master/control interface (what we're
- * probed with) and a slave/data interface; union
- * descriptors sort this all out.
- */
- info->control = usb_ifnum_to_if(dev->udev,
- info->u->bMasterInterface0);
- info->data = usb_ifnum_to_if(dev->udev,
- info->u->bSlaveInterface0);
- if (!info->control || !info->data) {
- dev_dbg (&intf->dev,
- "master #%u/%p slave #%u/%p\n",
- info->u->bMasterInterface0,
- info->control,
- info->u->bSlaveInterface0,
- info->data);
- goto bad_desc;
- }
- if (info->control != intf) {
- dev_dbg (&intf->dev, "bogus CDC Union\n");
- /* Ambit USB Cable Modem (and maybe others)
- * interchanges master and slave interface.
- */
- if (info->data == intf) {
- info->data = info->control;
- info->control = intf;
- } else
- goto bad_desc;
- }
-
- /* a data interface altsetting does the real i/o */
- d = &info->data->cur_altsetting->desc;
- if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
- dev_dbg (&intf->dev, "slave class %u\n",
- d->bInterfaceClass);
- goto bad_desc;
- }
- break;
- case USB_CDC_ETHERNET_TYPE:
- if (info->ether) {
- dev_dbg (&intf->dev, "extra CDC ether\n");
- goto bad_desc;
- }
- info->ether = (void *) buf;
- if (info->ether->bLength != sizeof *info->ether) {
- dev_dbg (&intf->dev, "CDC ether len %u\n",
- info->ether->bLength);
- goto bad_desc;
- }
- dev->hard_mtu = le16_to_cpu(
- info->ether->wMaxSegmentSize);
- /* because of Zaurus, we may be ignoring the host
- * side link address we were given.
- */
- break;
- }
-next_desc:
- len -= buf [0]; /* bLength */
- buf += buf [0];
- }
-
- if (!info->header || !info->u || (!rndis && !info->ether)) {
- dev_dbg (&intf->dev, "missing cdc %s%s%sdescriptor\n",
- info->header ? "" : "header ",
- info->u ? "" : "union ",
- info->ether ? "" : "ether ");
- goto bad_desc;
- }
-
- /* claim data interface and set it up ... with side effects.
- * network traffic can't flow until an altsetting is enabled.
- */
- status = usb_driver_claim_interface (&usbnet_driver, info->data, dev);
- if (status < 0)
- return status;
- status = usbnet_get_endpoints (dev, info->data);
- if (status < 0) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
- dev->status = NULL;
- if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
- struct usb_endpoint_descriptor *desc;
-
- dev->status = &info->control->cur_altsetting->endpoint [0];
- desc = &dev->status->desc;
- if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
- || !(desc->bEndpointAddress & USB_DIR_IN)
- || (le16_to_cpu(desc->wMaxPacketSize)
- < sizeof (struct usb_cdc_notification))
- || !desc->bInterval) {
- dev_dbg (&intf->dev, "bad notification endpoint\n");
- dev->status = NULL;
- }
- }
- if (rndis && !dev->status) {
- dev_dbg (&intf->dev, "missing RNDIS status endpoint\n");
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return -ENODEV;
- }
- return 0;
-
-bad_desc:
- dev_info (&dev->udev->dev, "bad CDC descriptors\n");
- return -ENODEV;
-}
-
-static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf)
-{
- struct cdc_state *info = (void *) &dev->data;
-
- /* disconnect master --> disconnect slave */
- if (intf == info->control && info->data) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- info->data = NULL;
- }
-
- /* and vice versa (just in case) */
- else if (intf == info->data && info->control) {
- /* ensure immediate exit from usbnet_disconnect */
- usb_set_intfdata(info->control, NULL);
- usb_driver_release_interface (&usbnet_driver, info->control);
- info->control = NULL;
- }
-}
-
-#endif /* NEED_GENERIC_CDC */
-
-\f
-#ifdef CONFIG_USB_CDCETHER
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- *
- * Takes two interfaces. The DATA interface is inactive till an altsetting
- * is selected. Configuration data includes class descriptors.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with.
- *
- *-------------------------------------------------------------------------*/
-
-#include <linux/ctype.h>
-
-
-static void dumpspeed (struct usbnet *dev, __le32 *speeds)
-{
- if (netif_msg_timer (dev))
- devinfo (dev, "link speeds: %u kbps up, %u kbps down",
- __le32_to_cpu(speeds[0]) / 1000,
- __le32_to_cpu(speeds[1]) / 1000);
-}
-
-static void cdc_status (struct usbnet *dev, struct urb *urb)
-{
- struct usb_cdc_notification *event;
-
- if (urb->actual_length < sizeof *event)
- return;
-
- /* SPEED_CHANGE can get split into two 8-byte packets */
- if (test_and_clear_bit (EVENT_STS_SPLIT, &dev->flags)) {
- dumpspeed (dev, (__le32 *) urb->transfer_buffer);
- return;
- }
-
- event = urb->transfer_buffer;
- switch (event->bNotificationType) {
- case USB_CDC_NOTIFY_NETWORK_CONNECTION:
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: carrier %s",
- event->wValue ? "on" : "off");
- if (event->wValue)
- netif_carrier_on(dev->net);
- else
- netif_carrier_off(dev->net);
- break;
- case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
- if (netif_msg_timer (dev))
- devdbg (dev, "CDC: speed change (len %d)",
- urb->actual_length);
- if (urb->actual_length != (sizeof *event + 8))
- set_bit (EVENT_STS_SPLIT, &dev->flags);
- else
- dumpspeed (dev, (__le32 *) &event[1]);
- break;
- // case USB_CDC_NOTIFY_RESPONSE_AVAILABLE: /* RNDIS; or unsolicited */
- default:
- deverr (dev, "CDC: unexpected notification %02x!",
- event->bNotificationType);
- break;
- }
-}
-
-static u8 nibble (unsigned char c)
-{
- if (likely (isdigit (c)))
- return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
- return 10 + c - 'A';
- return 0;
-}
-
-static inline int
-get_ethernet_addr (struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
- int tmp, i;
- unsigned char buf [13];
-
- tmp = usb_string (dev->udev, e->iMACAddress, buf, sizeof buf);
- if (tmp != 12) {
- dev_dbg (&dev->udev->dev,
- "bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
- if (tmp >= 0)
- tmp = -EINVAL;
- return tmp;
- }
- for (i = tmp = 0; i < 6; i++, tmp += 2)
- dev->net->dev_addr [i] =
- (nibble (buf [tmp]) << 4) + nibble (buf [tmp + 1]);
- return 0;
-}
-
-static int cdc_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- int status;
- struct cdc_state *info = (void *) &dev->data;
-
- status = generic_cdc_bind (dev, intf);
- if (status < 0)
- return status;
-
- status = get_ethernet_addr (dev, info->ether);
- if (status < 0) {
- usb_set_intfdata(info->data, NULL);
- usb_driver_release_interface (&usbnet_driver, info->data);
- return status;
- }
-
- /* FIXME cdc-ether has some multicast code too, though it complains
- * in routine cases. info->ether describes the multicast support.
- */
- return 0;
-}
-
-static const struct driver_info cdc_info = {
- .description = "CDC Ethernet Device",
- .flags = FLAG_ETHER,
- // .check_connect = cdc_check_connect,
- .bind = cdc_bind,
- .unbind = cdc_unbind,
- .status = cdc_status,
-};
-
-#endif /* CONFIG_USB_CDCETHER */
-
-
-\f
-#ifdef CONFIG_USB_GENESYS
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * GeneSys GL620USB-A (www.genesyslogic.com.tw)
- *
- * ... should partially interop with the Win32 driver for this hardware
- * The GeneSys docs imply there's some NDIS issue motivating this framing.
- *
- * Some info from GeneSys:
- * - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
- * (Some cables, like the BAFO-100c, use the half duplex version.)
- * - For the full duplex model, the low bit of the version code says
- * which side is which ("left/right").
- * - For the half duplex type, a control/interrupt handshake settles
- * the transfer direction. (That's disabled here, partially coded.)
- * A control URB would block until other side writes an interrupt.
- *
- * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
- *
- *-------------------------------------------------------------------------*/
-
-// control msg write command
-#define GENELINK_CONNECT_WRITE 0xF0
-// interrupt pipe index
-#define GENELINK_INTERRUPT_PIPE 0x03
-// interrupt read buffer size
-#define INTERRUPT_BUFSIZE 0x08
-// interrupt pipe interval value
-#define GENELINK_INTERRUPT_INTERVAL 0x10
-// max transmit packet number per transmit
-#define GL_MAX_TRANSMIT_PACKETS 32
-// max packet length
-#define GL_MAX_PACKET_LEN 1514
-// max receive buffer size
-#define GL_RCV_BUF_SIZE \
- (((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
-
-struct gl_packet {
- u32 packet_length;
- char packet_data [1];
-};
-
-struct gl_header {
- u32 packet_count;
- struct gl_packet packets;
-};
-
-#ifdef GENELINK_ACK
-
-// FIXME: this code is incomplete, not debugged; it doesn't
-// handle interrupts correctly. interrupts should be generic
-// code like all other device I/O, anyway.
-
-struct gl_priv {
- struct urb *irq_urb;
- char irq_buf [INTERRUPT_BUFSIZE];
-};
-
-static inline int gl_control_write (struct usbnet *dev, u8 request, u16 value)
-{
- int retval;
-
- retval = usb_control_msg (dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- request,
- USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- value,
- 0, // index
- 0, // data buffer
- 0, // size
- CONTROL_TIMEOUT_MS);
- return retval;
-}
-
-static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs)
-{
- int status = urb->status;
-
- switch (status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, urb->status);
- }
-
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-static int gl_interrupt_read (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
- int retval;
-
- // issue usb interrupt read
- if (priv && priv->irq_urb) {
- // submit urb
- if ((retval = usb_submit_urb (priv->irq_urb, GFP_KERNEL)) != 0)
- dbg ("gl_interrupt_read: submit fail - %X...", retval);
- else
- dbg ("gl_interrupt_read: submit success...");
- }
-
- return 0;
-}
-
-// check whether another side is connected
-static int genelink_check_connect (struct usbnet *dev)
-{
- int retval;
-
- dbg ("genelink_check_connect...");
-
- // detect whether another side is connected
- if ((retval = gl_control_write (dev, GENELINK_CONNECT_WRITE, 0)) != 0) {
- dbg ("%s: genelink_check_connect write fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- // usb interrupt read to ack another side
- if ((retval = gl_interrupt_read (dev)) != 0) {
- dbg ("%s: genelink_check_connect read fail - %X",
- dev->net->name, retval);
- return retval;
- }
-
- dbg ("%s: genelink_check_connect read success", dev->net->name);
- return 0;
-}
-
-// allocate and initialize the private data for genelink
-static int genelink_init (struct usbnet *dev)
-{
- struct gl_priv *priv;
-
- // allocate the private data structure
- if ((priv = kmalloc (sizeof *priv, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private data per device",
- dev->net->name);
- return -ENOMEM;
- }
-
- // allocate irq urb
- if ((priv->irq_urb = usb_alloc_urb (0, GFP_KERNEL)) == 0) {
- dbg ("%s: cannot allocate private irq urb per device",
- dev->net->name);
- kfree (priv);
- return -ENOMEM;
- }
-
- // fill irq urb
- usb_fill_int_urb (priv->irq_urb, dev->udev,
- usb_rcvintpipe (dev->udev, GENELINK_INTERRUPT_PIPE),
- priv->irq_buf, INTERRUPT_BUFSIZE,
- gl_interrupt_complete, 0,
- GENELINK_INTERRUPT_INTERVAL);
-
- // set private data pointer
- dev->priv_data = priv;
-
- return 0;
-}
-
-// release the private data
-static int genelink_free (struct usbnet *dev)
-{
- struct gl_priv *priv = dev->priv_data;
-
- if (!priv)
- return 0;
-
-// FIXME: can't cancel here; it's synchronous, and
-// should have happened earlier in any case (interrupt
-// handling needs to be generic)
-
- // cancel irq urb first
- usb_kill_urb (priv->irq_urb);
-
- // free irq urb
- usb_free_urb (priv->irq_urb);
-
- // free the private data structure
- kfree (priv);
-
- return 0;
-}
-
-#endif
-
-static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
- struct gl_header *header;
- struct gl_packet *packet;
- struct sk_buff *gl_skb;
- u32 size;
-
- header = (struct gl_header *) skb->data;
-
- // get the packet count of the received skb
- le32_to_cpus (&header->packet_count);
- if ((header->packet_count > GL_MAX_TRANSMIT_PACKETS)
- || (header->packet_count < 0)) {
- dbg ("genelink: invalid received packet count %d",
- header->packet_count);
- return 0;
- }
-
- // set the current packet pointer to the first packet
- packet = &header->packets;
-
- // decrement the length for the packet count size 4 bytes
- skb_pull (skb, 4);
-
- while (header->packet_count > 1) {
- // get the packet length
- size = packet->packet_length;
-
- // this may be a broken packet
- if (size > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", size);
- return 0;
- }
-
- // allocate the skb for the individual packet
- gl_skb = alloc_skb (size, GFP_ATOMIC);
- if (gl_skb) {
-
- // copy the packet data to the new skb
- memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- usbnet_skb_return (dev, gl_skb);
- }
-
- // advance to the next packet
- packet = (struct gl_packet *)
- &packet->packet_data [size];
- header->packet_count--;
-
- // shift the data pointer to the next gl_packet
- skb_pull (skb, size + 4);
- }
-
- // skip the packet length field 4 bytes
- skb_pull (skb, 4);
-
- if (skb->len > GL_MAX_PACKET_LEN) {
- dbg ("genelink: invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *
-genelink_tx_fixup (struct usbnet *dev, struct sk_buff *skb, unsigned flags)
-{
- int padlen;
- int length = skb->len;
- int headroom = skb_headroom (skb);
- int tailroom = skb_tailroom (skb);
- u32 *packet_count;
- u32 *packet_len;
-
- // FIXME: magic numbers, bleech
- padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
-
- if ((!skb_cloned (skb))
- && ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
- if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
- skb->data = memmove (skb->head + (4 + 4*1),
- skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand (skb, (4 + 4*1) , padlen, flags);
- dev_kfree_skb_any (skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- // attach the packet count to the header
- packet_count = (u32 *) skb_push (skb, (4 + 4*1));
- packet_len = packet_count + 1;
-
- // FIXME little endian?
- *packet_count = 1;
- *packet_len = length;
-
- // add padding byte
- if ((skb->len % dev->maxpacket) == 0)
- skb_put (skb, 1);
-
- return skb;
-}
-
-static int genelink_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- dev->hard_mtu = GL_RCV_BUF_SIZE;
- dev->net->hard_header_len += 4;
- return 0;
-}
-
-static const struct driver_info genelink_info = {
- .description = "Genesys GeneLink",
- .flags = FLAG_FRAMING_GL | FLAG_NO_SETINT,
- .bind = genelink_bind,
- .rx_fixup = genelink_rx_fixup,
- .tx_fixup = genelink_tx_fixup,
-
- .in = 1, .out = 2,
-
-#ifdef GENELINK_ACK
- .check_connect =genelink_check_connect,
-#endif
-};
-
-#endif /* CONFIG_USB_GENESYS */
-
-
-\f
-#ifdef CONFIG_USB_NET1080
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Netchip 1080 driver ... http://www.netchip.com
- * Used in LapLink cables
- *
- *-------------------------------------------------------------------------*/
-
-#define frame_errors data[1]
-
-/*
- * NetChip framing of ethernet packets, supporting additional error
- * checks for links that may drop bulk packets from inside messages.
- * Odd USB length == always short read for last usb packet.
- * - nc_header
- * - Ethernet header (14 bytes)
- * - payload
- * - (optional padding byte, if needed so length becomes odd)
- * - nc_trailer
- *
- * This framing is to be avoided for non-NetChip devices.
- */
-
-struct nc_header { // packed:
- __le16 hdr_len; // sizeof nc_header (LE, all)
- __le16 packet_len; // payload size (including ethhdr)
- __le16 packet_id; // detects dropped packets
-#define MIN_HEADER 6
-
- // all else is optional, and must start with:
- // u16 vendorId; // from usb-if
- // u16 productId;
-} __attribute__((__packed__));
-
-#define PAD_BYTE ((unsigned char)0xAC)
-
-struct nc_trailer {
- __le16 packet_id;
-} __attribute__((__packed__));
-
-// packets may use FLAG_FRAMING_NC and optional pad
-#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
- + sizeof (struct ethhdr) \
- + (mtu) \
- + 1 \
- + sizeof (struct nc_trailer))
-
-#define MIN_FRAMED FRAMED_SIZE(0)
-
-/* packets _could_ be up to 64KB... */
-#define NC_MAX_PACKET 32767
-
-
-/*
- * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
- * before the hardware drops it. If that's done, the driver will need to
- * frame network packets to guard against the dropped USB packets. The win32
- * driver sets this for both sides of the link.
- */
-#define NC_READ_TTL_MS ((u8)255) // ms
-
-/*
- * We ignore most registers and EEPROM contents.
- */
-#define REG_USBCTL ((u8)0x04)
-#define REG_TTL ((u8)0x10)
-#define REG_STATUS ((u8)0x11)
-
-/*
- * Vendor specific requests to read/write data
- */
-#define REQUEST_REGISTER ((u8)0x10)
-#define REQUEST_EEPROM ((u8)0x11)
-
-static int
-nc_vendor_read (struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
-{
- int status = usb_control_msg (dev->udev,
- usb_rcvctrlpipe (dev->udev, 0),
- req,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0, regnum,
- retval_ptr, sizeof *retval_ptr,
- CONTROL_TIMEOUT_MS);
- if (status > 0)
- status = 0;
- if (!status)
- le16_to_cpus (retval_ptr);
- return status;
-}
-
-static inline int
-nc_register_read (struct usbnet *dev, u8 regnum, u16 *retval_ptr)
-{
- return nc_vendor_read (dev, REQUEST_REGISTER, regnum, retval_ptr);
-}
-
-// no retval ... can become async, usable in_interrupt()
-static void
-nc_vendor_write (struct usbnet *dev, u8 req, u8 regnum, u16 value)
-{
- usb_control_msg (dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- req,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value, regnum,
- NULL, 0, // data is in setup packet
- CONTROL_TIMEOUT_MS);
-}
-
-static inline void
-nc_register_write (struct usbnet *dev, u8 regnum, u16 value)
-{
- nc_vendor_write (dev, REQUEST_REGISTER, regnum, value);
-}
-
-
-#if 0
-static void nc_dump_registers (struct usbnet *dev)
-{
- u8 reg;
- u16 *vp = kmalloc (sizeof (u16));
-
- if (!vp) {
- dbg ("no memory?");
- return;
- }
-
- dbg ("%s registers:", dev->net->name);
- for (reg = 0; reg < 0x20; reg++) {
- int retval;
-
- // reading some registers is trouble
- if (reg >= 0x08 && reg <= 0xf)
- continue;
- if (reg >= 0x12 && reg <= 0x1e)
- continue;
-
- retval = nc_register_read (dev, reg, vp);
- if (retval < 0)
- dbg ("%s reg [0x%x] ==> error %d",
- dev->net->name, reg, retval);
- else
- dbg ("%s reg [0x%x] = 0x%x",
- dev->net->name, reg, *vp);
- }
- kfree (vp);
-}
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Control register
- */
-
-#define USBCTL_WRITABLE_MASK 0x1f0f
-// bits 15-13 reserved, r/o
-#define USBCTL_ENABLE_LANG (1 << 12)
-#define USBCTL_ENABLE_MFGR (1 << 11)
-#define USBCTL_ENABLE_PROD (1 << 10)
-#define USBCTL_ENABLE_SERIAL (1 << 9)
-#define USBCTL_ENABLE_DEFAULTS (1 << 8)
-// bits 7-4 reserved, r/o
-#define USBCTL_FLUSH_OTHER (1 << 3)
-#define USBCTL_FLUSH_THIS (1 << 2)
-#define USBCTL_DISCONN_OTHER (1 << 1)
-#define USBCTL_DISCONN_THIS (1 << 0)
-
-static inline void nc_dump_usbctl (struct usbnet *dev, u16 usbctl)
-{
- if (!netif_msg_link (dev))
- return;
- devdbg (dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
- " this%s%s;"
- " other%s%s; r/o 0x%x",
- dev->udev->bus->bus_name, dev->udev->devpath,
- usbctl,
- (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
- (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
- (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
- (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
- (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
-
- (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
- (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
- (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
- (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
- usbctl & ~USBCTL_WRITABLE_MASK
- );
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Status register
- */
-
-#define STATUS_PORT_A (1 << 15)
-
-#define STATUS_CONN_OTHER (1 << 14)
-#define STATUS_SUSPEND_OTHER (1 << 13)
-#define STATUS_MAILBOX_OTHER (1 << 12)
-#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03)
-
-#define STATUS_CONN_THIS (1 << 6)
-#define STATUS_SUSPEND_THIS (1 << 5)
-#define STATUS_MAILBOX_THIS (1 << 4)
-#define STATUS_PACKETS_THIS(n) (((n) >> 0) && 0x03)
-
-#define STATUS_UNSPEC_MASK 0x0c8c
-#define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK))
-
-
-static inline void nc_dump_status (struct usbnet *dev, u16 status)
-{
- if (!netif_msg_link (dev))
- return;
- devdbg (dev, "net1080 %s-%s status 0x%x:"
- " this (%c) PKT=%d%s%s%s;"
- " other PKT=%d%s%s%s; unspec 0x%x",
- dev->udev->bus->bus_name, dev->udev->devpath,
- status,
-
- // XXX the packet counts don't seem right
- // (1 at reset, not 0); maybe UNSPEC too
-
- (status & STATUS_PORT_A) ? 'A' : 'B',
- STATUS_PACKETS_THIS (status),
- (status & STATUS_CONN_THIS) ? " CON" : "",
- (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
- (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
-
- STATUS_PACKETS_OTHER (status),
- (status & STATUS_CONN_OTHER) ? " CON" : "",
- (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
- (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
-
- status & STATUS_UNSPEC_MASK
- );
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * TTL register
- */
-
-#define TTL_THIS(ttl) (0x00ff & ttl)
-#define TTL_OTHER(ttl) (0x00ff & (ttl >> 8))
-#define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this))))
-
-static inline void nc_dump_ttl (struct usbnet *dev, u16 ttl)
-{
- if (netif_msg_link (dev))
- devdbg (dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
- dev->udev->bus->bus_name, dev->udev->devpath,
- ttl, TTL_THIS (ttl), TTL_OTHER (ttl));
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int net1080_reset (struct usbnet *dev)
-{
- u16 usbctl, status, ttl;
- u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL);
- int retval;
-
- if (!vp)
- return -ENOMEM;
-
- // nc_dump_registers (dev);
-
- if ((retval = nc_register_read (dev, REG_STATUS, vp)) < 0) {
- dbg ("can't read %s-%s status: %d",
- dev->udev->bus->bus_name, dev->udev->devpath, retval);
- goto done;
- }
- status = *vp;
- nc_dump_status (dev, status);
-
- if ((retval = nc_register_read (dev, REG_USBCTL, vp)) < 0) {
- dbg ("can't read USBCTL, %d", retval);
- goto done;
- }
- usbctl = *vp;
- nc_dump_usbctl (dev, usbctl);
-
- nc_register_write (dev, REG_USBCTL,
- USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
-
- if ((retval = nc_register_read (dev, REG_TTL, vp)) < 0) {
- dbg ("can't read TTL, %d", retval);
- goto done;
- }
- ttl = *vp;
- // nc_dump_ttl (dev, ttl);
-
- nc_register_write (dev, REG_TTL,
- MK_TTL (NC_READ_TTL_MS, TTL_OTHER (ttl)) );
- dbg ("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
-
- if (netif_msg_link (dev))
- devinfo (dev, "port %c, peer %sconnected",
- (status & STATUS_PORT_A) ? 'A' : 'B',
- (status & STATUS_CONN_OTHER) ? "" : "dis"
- );
- retval = 0;
-
-done:
- kfree (vp);
- return retval;
-}
-
-static int net1080_check_connect (struct usbnet *dev)
-{
- int retval;
- u16 status;
- u16 *vp = kmalloc (sizeof (u16), GFP_KERNEL);
-
- if (!vp)
- return -ENOMEM;
- retval = nc_register_read (dev, REG_STATUS, vp);
- status = *vp;
- kfree (vp);
- if (retval != 0) {
- dbg ("%s net1080_check_conn read - %d", dev->net->name, retval);
- return retval;
- }
- if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
- return -ENOLINK;
- return 0;
-}
-
-static void nc_flush_complete (struct urb *urb, struct pt_regs *regs)
-{
- kfree (urb->context);
- usb_free_urb(urb);
-}
-
-static void nc_ensure_sync (struct usbnet *dev)
-{
- dev->frame_errors++;
- if (dev->frame_errors > 5) {
- struct urb *urb;
- struct usb_ctrlrequest *req;
- int status;
-
- /* Send a flush */
- urb = usb_alloc_urb (0, SLAB_ATOMIC);
- if (!urb)
- return;
-
- req = kmalloc (sizeof *req, GFP_ATOMIC);
- if (!req) {
- usb_free_urb (urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT
- | USB_TYPE_VENDOR
- | USB_RECIP_DEVICE;
- req->bRequest = REQUEST_REGISTER;
- req->wValue = cpu_to_le16 (USBCTL_FLUSH_THIS
- | USBCTL_FLUSH_OTHER);
- req->wIndex = cpu_to_le16 (REG_USBCTL);
- req->wLength = cpu_to_le16 (0);
-
- /* queue an async control request, we don't need
- * to do anything when it finishes except clean up.
- */
- usb_fill_control_urb (urb, dev->udev,
- usb_sndctrlpipe (dev->udev, 0),
- (unsigned char *) req,
- NULL, 0,
- nc_flush_complete, req);
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status) {
- kfree (req);
- usb_free_urb (urb);
- return;
- }
-
- if (netif_msg_rx_err (dev))
- devdbg (dev, "flush net1080; too many framing errors");
- dev->frame_errors = 0;
- }
-}
-
-static int net1080_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
-{
- struct nc_header *header;
- struct net_device *net = dev->net;
- struct nc_trailer *trailer;
- u16 hdr_len, packet_len;
-
- if (!(skb->len & 0x01)) {
- dev->stats.rx_frame_errors++;
- dbg ("rx framesize %d range %d..%d mtu %d", skb->len,
- net->hard_header_len, dev->hard_mtu, net->mtu);
- nc_ensure_sync (dev);
- return 0;
- }
-
- header = (struct nc_header *) skb->data;
- hdr_len = le16_to_cpup (&header->hdr_len);
- packet_len = le16_to_cpup (&header->packet_len);
- if (FRAMED_SIZE (packet_len) > NC_MAX_PACKET) {
- dev->stats.rx_frame_errors++;
- dbg ("packet too big, %d", packet_len);
- nc_ensure_sync (dev);
- return 0;
- } else if (hdr_len < MIN_HEADER) {
- dev->stats.rx_frame_errors++;
- dbg ("header too short, %d", hdr_len);
- nc_ensure_sync (dev);
- return 0;
- } else if (hdr_len > MIN_HEADER) {
- // out of band data for us?
- dbg ("header OOB, %d bytes", hdr_len - MIN_HEADER);
- nc_ensure_sync (dev);
- // switch (vendor/product ids) { ... }
- }
- skb_pull (skb, hdr_len);
-
- trailer = (struct nc_trailer *)
- (skb->data + skb->len - sizeof *trailer);
- skb_trim (skb, skb->len - sizeof *trailer);
-
- if ((packet_len & 0x01) == 0) {
- if (skb->data [packet_len] != PAD_BYTE) {
- dev->stats.rx_frame_errors++;
- dbg ("bad pad");
- return 0;
- }
- skb_trim (skb, skb->len - 1);
- }
- if (skb->len != packet_len) {
- dev->stats.rx_frame_errors++;
- dbg ("bad packet len %d (expected %d)",
- skb->len, packet_len);
- nc_ensure_sync (dev);
- return 0;
- }
- if (header->packet_id != get_unaligned (&trailer->packet_id)) {
- dev->stats.rx_fifo_errors++;
- dbg ("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
- le16_to_cpu (header->packet_id),
- le16_to_cpu (trailer->packet_id));
- return 0;
- }
-#if 0
- devdbg (dev, "frame <rx h %d p %d id %d", header->hdr_len,
- header->packet_len, header->packet_id);
-#endif
- dev->frame_errors = 0;
- return 1;
-}
-
-static struct sk_buff *
-net1080_tx_fixup (struct usbnet *dev, struct sk_buff *skb, unsigned flags)
-{
- int padlen;
- struct sk_buff *skb2;
-
- padlen = ((skb->len + sizeof (struct nc_header)
- + sizeof (struct nc_trailer)) & 0x01) ? 0 : 1;
- if (!skb_cloned (skb)) {
- int headroom = skb_headroom (skb);
- int tailroom = skb_tailroom (skb);
-
- if ((padlen + sizeof (struct nc_trailer)) <= tailroom
- && sizeof (struct nc_header) <= headroom)
- /* There's enough head and tail room */
- return skb;
-
- if ((sizeof (struct nc_header) + padlen
- + sizeof (struct nc_trailer)) <
- (headroom + tailroom)) {
- /* There's enough total room, so just readjust */
- skb->data = memmove (skb->head
- + sizeof (struct nc_header),
- skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- return skb;
- }
- }
-
- /* Create a new skb to use with the correct size */
- skb2 = skb_copy_expand (skb,
- sizeof (struct nc_header),
- sizeof (struct nc_trailer) + padlen,
- flags);
- dev_kfree_skb_any (skb);
- return skb2;
-}
-
-static int net1080_bind (struct usbnet *dev, struct usb_interface *intf)
-{
- unsigned extra = sizeof (struct nc_header)
- + 1
- + sizeof (struct nc_trailer);
-
- dev->net->hard_header_len += extra;
- dev->hard_mtu = NC_MAX_PACKET;
- return 0;
-}
-
-static const struct driver_info net1080_info = {
- .description = "NetChip TurboCONNECT",
- .flags = FLAG_FRAMING_NC,
- .bind = net1080_bind,
- .reset = net1080_reset,
- .check_connect = net1080_check_connect,
- .rx_fixup = net1080_rx_fixup,
- .tx_fixup = net1080_tx_fixup,
-};
-
-#endif /* CONFIG_USB_NET1080 */
-
-
-\f
-#ifdef CONFIG_USB_PL2301
-#define HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
- *
- * The protocol and handshaking used here should be bug-compatible
- * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
- *
- *-------------------------------------------------------------------------*/
-
-/*
- * Bits 0-4 can be used for software handshaking; they're set from
- * one end, cleared from the other, "read" with the interrupt byte.