Allow executables larger than 2GB

[linux-2.6-omap-h63xx.git] / fs / Kconfig

diff --git a/fs/Kconfig b/fs/Kconfig
index 487236c658374a1ecdbbc88ec8f2cd365a283bba..d7312825592bd33e84cff35805a5430aebfb4220 100644 (file)
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -236,6 +236,7 @@ config JBD_DEBUG
 
 config JBD2
        tristate
 
 config JBD2
        tristate

+       select CRC32

        help
          This is a generic journaling layer for block devices that support
          both 32-bit and 64-bit block numbers.  It is currently used by
        help
          This is a generic journaling layer for block devices that support
          both 32-bit and 64-bit block numbers.  It is currently used by


@@ -440,14 +441,8 @@ config OCFS2_FS
          Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
          OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 
          Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
          OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
 

-         Note: Features which OCFS2 does not support yet:
-                 - extended attributes
-                 - quotas
-                 - cluster aware flock
-                 - Directory change notification (F_NOTIFY)
-                 - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
-                 - POSIX ACLs
-                 - readpages / writepages (not user visible)
+         For more information on OCFS2, see the file
+         <file:Documentation/filesystems/ocfs2.txt>.

 
 config OCFS2_DEBUG_MASKLOG
        bool "OCFS2 logging support"
 
 config OCFS2_DEBUG_MASKLOG
        bool "OCFS2 logging support"


@@ -468,40 +463,18 @@ config OCFS2_DEBUG_FS
          this option for debugging only as it is likely to decrease
          performance of the filesystem.
 
          this option for debugging only as it is likely to decrease
          performance of the filesystem.
 

-config MINIX_FS
-       tristate "Minix fs support"
-       help
-         Minix is a simple operating system used in many classes about OS's.
-         The minix file system (method to organize files on a hard disk
-         partition or a floppy disk) was the original file system for Linux,
-         but has been superseded by the second extended file system ext2fs.
-         You don't want to use the minix file system on your hard disk
-         because of certain built-in restrictions, but it is sometimes found
-         on older Linux floppy disks.  This option will enlarge your kernel
-         by about 28 KB. If unsure, say N.
-
-         To compile this file system support as a module, choose M here: the
-         module will be called minix.  Note that the file system of your root
-         partition (the one containing the directory /) cannot be compiled as
-         a module.
-
-config ROMFS_FS
-       tristate "ROM file system support"
-       ---help---
-         This is a very small read-only file system mainly intended for
-         initial ram disks of installation disks, but it could be used for
-         other read-only media as well.  Read
-         <file:Documentation/filesystems/romfs.txt> for details.
-
-         To compile this file system support as a module, choose M here: the
-         module will be called romfs.  Note that the file system of your
-         root partition (the one containing the directory /) cannot be a
-         module.
+endif # BLOCK

 
 

-         If you don't know whether you need it, then you don't need it:
-         answer N.
+config DNOTIFY
+       bool "Dnotify support"
+       default y
+       help
+         Dnotify is a directory-based per-fd file change notification system
+         that uses signals to communicate events to user-space.  There exist
+         superior alternatives, but some applications may still rely on
+         dnotify.

 
 

-endif
+         If unsure, say Y.

 
 config INOTIFY
        bool "Inotify file change notification support"
 
 config INOTIFY
        bool "Inotify file change notification support"


@@ -582,17 +555,6 @@ config QUOTACTL
        depends on XFS_QUOTA || QUOTA
        default y
 
        depends on XFS_QUOTA || QUOTA
        default y
 

-config DNOTIFY
-       bool "Dnotify support"
-       default y
-       help
-         Dnotify is a directory-based per-fd file change notification system
-         that uses signals to communicate events to user-space.  There exist
-         superior alternatives, but some applications may still rely on
-         dnotify.
-
-         If unsure, say Y.
-

 config AUTOFS_FS
        tristate "Kernel automounter support"
        help
 config AUTOFS_FS
        tristate "Kernel automounter support"
        help


@@ -718,7 +680,7 @@ config UDF_NLS
        depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
 
 endmenu
        depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
 
 endmenu

-endif
+endif # BLOCK

 
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
 if BLOCK
 menu "DOS/FAT/NT Filesystems"


@@ -901,7 +863,7 @@ config NTFS_RW
          It is perfectly safe to say N here.
 
 endmenu
          It is perfectly safe to say N here.
 
 endmenu

-endif
+endif # BLOCK

 
 menu "Pseudo filesystems"
 
 
 menu "Pseudo filesystems"
 


@@ -1028,8 +990,8 @@ config HUGETLB_PAGE
        def_bool HUGETLBFS
 
 config CONFIGFS_FS
        def_bool HUGETLBFS
 
 config CONFIGFS_FS

-       tristate "Userspace-driven configuration filesystem (EXPERIMENTAL)"
-       depends on SYSFS && EXPERIMENTAL
+       tristate "Userspace-driven configuration filesystem"
+       depends on SYSFS

        help
          configfs is a ram-based filesystem that provides the converse
          of sysfs's functionality. Where sysfs is a filesystem-based
        help
          configfs is a ram-based filesystem that provides the converse
          of sysfs's functionality. Where sysfs is a filesystem-based


@@ -1112,8 +1074,8 @@ config HFS_FS
        help
          If you say Y here, you will be able to mount Macintosh-formatted
          floppy disks and hard drive partitions with full read-write access.
        help
          If you say Y here, you will be able to mount Macintosh-formatted
          floppy disks and hard drive partitions with full read-write access.

-         Please read <file:fs/hfs/HFS.txt> to learn about the available mount
-         options.
+         Please read <file:Documentation/filesystems/hfs.txt> to learn about
+         the available mount options.

 
          To compile this file system support as a module, choose M here: the
          module will be called hfs.
 
          To compile this file system support as a module, choose M here: the
          module will be called hfs.


@@ -1157,7 +1119,7 @@ config BEFS_DEBUG
        depends on BEFS_FS
        help
          If you say Y here, you can use the 'debug' mount option to enable
        depends on BEFS_FS
        help
          If you say Y here, you can use the 'debug' mount option to enable

-         debugging output from the driver. 
+         debugging output from the driver.

 
 config BFS_FS
        tristate "BFS file system support (EXPERIMENTAL)"
 
 config BFS_FS
        tristate "BFS file system support (EXPERIMENTAL)"


@@ -1268,7 +1230,7 @@ config JFFS2_FS_XATTR
          Extended attributes are name:value pairs associated with inodes by
          the kernel or by users (see the attr(5) manual page, or visit
          <http://acl.bestbits.at/> for details).
          Extended attributes are name:value pairs associated with inodes by
          the kernel or by users (see the attr(5) manual page, or visit
          <http://acl.bestbits.at/> for details).

-         
+

          If unsure, say N.
 
 config JFFS2_FS_POSIX_ACL
          If unsure, say N.
 
 config JFFS2_FS_POSIX_ACL


@@ -1279,10 +1241,10 @@ config JFFS2_FS_POSIX_ACL
        help
          Posix Access Control Lists (ACLs) support permissions for users and
          groups beyond the owner/group/world scheme.
        help
          Posix Access Control Lists (ACLs) support permissions for users and
          groups beyond the owner/group/world scheme.

-         
+

          To learn more about Access Control Lists, visit the Posix ACLs for
          Linux website <http://acl.bestbits.at/>.
          To learn more about Access Control Lists, visit the Posix ACLs for
          Linux website <http://acl.bestbits.at/>.

-         
+

          If you don't know what Access Control Lists are, say N
 
 config JFFS2_FS_SECURITY
          If you don't know what Access Control Lists are, say N
 
 config JFFS2_FS_SECURITY


@@ -1294,7 +1256,7 @@ config JFFS2_FS_SECURITY
          implemented by security modules like SELinux.  This option
          enables an extended attribute handler for file security
          labels in the jffs2 filesystem.
          implemented by security modules like SELinux.  This option
          enables an extended attribute handler for file security
          labels in the jffs2 filesystem.

-         
+

          If you are not using a security module that requires using
          extended attributes for file security labels, say N.
 
          If you are not using a security module that requires using
          extended attributes for file security labels, say N.
 


@@ -1422,6 +1384,24 @@ config VXFS_FS
          To compile this as a module, choose M here: the module will be
          called freevxfs.  If unsure, say N.
 
          To compile this as a module, choose M here: the module will be
          called freevxfs.  If unsure, say N.
 

+config MINIX_FS
+       tristate "Minix file system support"
+       depends on BLOCK
+       help
+         Minix is a simple operating system used in many classes about OS's.
+         The minix file system (method to organize files on a hard disk
+         partition or a floppy disk) was the original file system for Linux,
+         but has been superseded by the second extended file system ext2fs.
+         You don't want to use the minix file system on your hard disk
+         because of certain built-in restrictions, but it is sometimes found
+         on older Linux floppy disks.  This option will enlarge your kernel
+         by about 28 KB. If unsure, say N.
+
+         To compile this file system support as a module, choose M here: the
+         module will be called minix.  Note that the file system of your root
+         partition (the one containing the directory /) cannot be compiled as
+         a module.
+

 
 config HPFS_FS
        tristate "OS/2 HPFS file system support"
 
 config HPFS_FS
        tristate "OS/2 HPFS file system support"


@@ -1439,7 +1419,6 @@ config HPFS_FS
          module will be called hpfs.  If unsure, say N.
 
 
          module will be called hpfs.  If unsure, say N.
 
 

-

 config QNX4FS_FS
        tristate "QNX4 file system support (read only)"
        depends on BLOCK
 config QNX4FS_FS
        tristate "QNX4 file system support (read only)"
        depends on BLOCK


@@ -1466,6 +1445,22 @@ config QNX4FS_RW
          It's currently broken, so for now:
          answer N.
 
          It's currently broken, so for now:
          answer N.
 

+config ROMFS_FS
+       tristate "ROM file system support"
+       depends on BLOCK
+       ---help---
+         This is a very small read-only file system mainly intended for
+         initial ram disks of installation disks, but it could be used for
+         other read-only media as well.  Read
+         <file:Documentation/filesystems/romfs.txt> for details.
+
+         To compile this file system support as a module, choose M here: the
+         module will be called romfs.  Note that the file system of your
+         root partition (the one containing the directory /) cannot be a
+         module.
+
+         If you don't know whether you need it, then you don't need it:
+         answer N.

 
 
 config SYSV_FS
 
 
 config SYSV_FS


@@ -1506,7 +1501,6 @@ config SYSV_FS
          If you haven't heard about all of this before, it's safe to say N.
 
 
          If you haven't heard about all of this before, it's safe to say N.
 
 

-

 config UFS_FS
        tristate "UFS file system support (read only)"
        depends on BLOCK
 config UFS_FS
        tristate "UFS file system support (read only)"
        depends on BLOCK


@@ -1679,6 +1673,8 @@ config NFSD
        select CRYPTO_MD5 if NFSD_V4
        select CRYPTO if NFSD_V4
        select FS_POSIX_ACL if NFSD_V4
        select CRYPTO_MD5 if NFSD_V4
        select CRYPTO if NFSD_V4
        select FS_POSIX_ACL if NFSD_V4

+       select PROC_FS if NFSD_V4
+       select PROC_FS if SUNRPC_GSS

        help
          If you want your Linux box to act as an NFS *server*, so that other
          computers on your local network which support NFS can access certain
        help
          If you want your Linux box to act as an NFS *server*, so that other
          computers on your local network which support NFS can access certain


@@ -1782,12 +1778,9 @@ config SUNRPC_GSS
        tristate
 
 config SUNRPC_XPRT_RDMA
        tristate
 
 config SUNRPC_XPRT_RDMA

-       tristate "RDMA transport for sunrpc (EXPERIMENTAL)"
+       tristate

        depends on SUNRPC && INFINIBAND && EXPERIMENTAL
        depends on SUNRPC && INFINIBAND && EXPERIMENTAL

-       default m
-       help
-         Adds a client RPC transport for supporting kernel NFS over RDMA
-         mounts, including Infiniband and iWARP. Experimental.
+       default SUNRPC && INFINIBAND

 
 config SUNRPC_BIND34
        bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)"
 
 config SUNRPC_BIND34
        bool "Support for rpcbind versions 3 & 4 (EXPERIMENTAL)"


@@ -1838,7 +1831,7 @@ config RPCSEC_GSS_SPKM3
          If unsure, say N.
 
 config SMB_FS
          If unsure, say N.
 
 config SMB_FS

-       tristate "SMB file system support (to mount Windows shares etc.)"
+       tristate "SMB file system support (OBSOLETE, please use CIFS)"

        depends on INET
        select NLS
        help
        depends on INET
        select NLS
        help


@@ -1861,8 +1854,8 @@ config SMB_FS
          General information about how to connect Linux, Windows machines and
          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
 
          General information about how to connect Linux, Windows machines and
          Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
 

-         To compile the SMB support as a module, choose M here: the module will
-         be called smbfs.  Most people say N, however.
+         To compile the SMB support as a module, choose M here:
+         the module will be called smbfs.  Most people say N, however.

 
 config SMB_NLS_DEFAULT
        bool "Use a default NLS"
 
 config SMB_NLS_DEFAULT
        bool "Use a default NLS"


@@ -1894,7 +1887,7 @@ config SMB_NLS_REMOTE
          smbmount from samba 2.2.0 or later supports this.
 
 config CIFS
          smbmount from samba 2.2.0 or later supports this.
 
 config CIFS

-       tristate "CIFS support (advanced network filesystem for Samba, Window and other CIFS compliant servers)"
+       tristate "CIFS support (advanced network filesystem, SMBFS successor)"

        depends on INET
        select NLS
        help
        depends on INET
        select NLS
        help


@@ -1905,13 +1898,15 @@ config CIFS
          file servers such as Windows 2000 (including Windows 2003, NT 4  
          and Windows XP) as well by Samba (which provides excellent CIFS
          server support for Linux and many other operating systems). Limited
          file servers such as Windows 2000 (including Windows 2003, NT 4  
          and Windows XP) as well by Samba (which provides excellent CIFS
          server support for Linux and many other operating systems). Limited

-         support for OS/2 and Windows ME and similar servers is provided as well.
-
-         The intent of the cifs module is to provide an advanced
-         network file system client for mounting to CIFS compliant servers,
-         including support for dfs (hierarchical name space), secure per-user
-         session establishment, safe distributed caching (oplock), optional
-         packet signing, Unicode and other internationalization improvements. 
+         support for OS/2 and Windows ME and similar servers is provided as
+         well.
+
+         The cifs module provides an advanced network file system
+         client for mounting to CIFS compliant servers.  It includes
+         support for DFS (hierarchical name space), secure per-user
+         session establishment via Kerberos or NTLM or NTLMv2,
+         safe distributed caching (oplock), optional packet
+         signing, Unicode and other internationalization improvements.

          If you need to mount to Samba or Windows from this machine, say Y.
 
 config CIFS_STATS
          If you need to mount to Samba or Windows from this machine, say Y.
 
 config CIFS_STATS


@@ -1943,22 +1938,23 @@ config CIFS_WEAK_PW_HASH
          (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
          security mechanisms. These hash the password more securely
          than the mechanisms used in the older LANMAN version of the
          (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
          security mechanisms. These hash the password more securely
          than the mechanisms used in the older LANMAN version of the

-          SMB protocol needed to establish sessions with old SMB servers.
+         SMB protocol but LANMAN based authentication is needed to
+         establish sessions with some old SMB servers.

 
          Enabling this option allows the cifs module to mount to older
          LANMAN based servers such as OS/2 and Windows 95, but such
          mounts may be less secure than mounts using NTLM or more recent
          security mechanisms if you are on a public network.  Unless you
 
          Enabling this option allows the cifs module to mount to older
          LANMAN based servers such as OS/2 and Windows 95, but such
          mounts may be less secure than mounts using NTLM or more recent
          security mechanisms if you are on a public network.  Unless you

-         have a need to access old SMB servers (and are on a private 
+         have a need to access old SMB servers (and are on a private

          network) you probably want to say N.  Even if this support
          network) you probably want to say N.  Even if this support

-         is enabled in the kernel build, they will not be used
-         automatically. At runtime LANMAN mounts are disabled but
+         is enabled in the kernel build, LANMAN authentication will not be
+         used automatically. At runtime LANMAN mounts are disabled but

          can be set to required (or optional) either in
          /proc/fs/cifs (see fs/cifs/README for more detail) or via an
          can be set to required (or optional) either in
          /proc/fs/cifs (see fs/cifs/README for more detail) or via an

-         option on the mount command. This support is disabled by 
+         option on the mount command. This support is disabled by

          default in order to reduce the possibility of a downgrade
          attack.
          default in order to reduce the possibility of a downgrade
          attack.

- 
+

          If unsure, say N.
 
 config CIFS_XATTR
          If unsure, say N.
 
 config CIFS_XATTR


@@ -1999,7 +1995,7 @@ config CIFS_DEBUG2
           messages in some error paths, slowing performance. This
           option can be turned off unless you are debugging
           cifs problems.  If unsure, say N.
           messages in some error paths, slowing performance. This
           option can be turned off unless you are debugging
           cifs problems.  If unsure, say N.

-          
+

 config CIFS_EXPERIMENTAL
          bool "CIFS Experimental Features (EXPERIMENTAL)"
          depends on CIFS && EXPERIMENTAL
 config CIFS_EXPERIMENTAL
          bool "CIFS Experimental Features (EXPERIMENTAL)"
          depends on CIFS && EXPERIMENTAL


@@ -2018,12 +2014,22 @@ config CIFS_UPCALL
          depends on CIFS_EXPERIMENTAL
          depends on KEYS
          help
          depends on CIFS_EXPERIMENTAL
          depends on KEYS
          help

-           Enables an upcall mechanism for CIFS which will be used to contact
-           userspace helper utilities to provide SPNEGO packaged Kerberos
-           tickets which are needed to mount to certain secure servers
+           Enables an upcall mechanism for CIFS which accesses
+           userspace helper utilities to provide SPNEGO packaged (RFC 4178)
+           Kerberos tickets which are needed to mount to certain secure servers

            (for which more secure Kerberos authentication is required). If
            unsure, say N.
 
            (for which more secure Kerberos authentication is required). If
            unsure, say N.
 

+config CIFS_DFS_UPCALL
+         bool "DFS feature support (EXPERIMENTAL)"
+         depends on CIFS_EXPERIMENTAL
+         depends on KEYS
+         help
+           Enables an upcall mechanism for CIFS which contacts userspace
+           helper utilities to provide server name resolution (host names to
+           IP addresses) which is needed for implicit mounts of DFS junction
+           points. If unsure, say N.
+

 config NCP_FS
        tristate "NCP file system support (to mount NetWare volumes)"
        depends on IPX!=n || INET
 config NCP_FS
        tristate "NCP file system support (to mount NetWare volumes)"
        depends on IPX!=n || INET


@@ -2080,7 +2086,7 @@ config CODA_FS_OLD_API
          However this new API is not backward compatible with older
          clients. If you really need to run the old Coda userspace
          cache manager then say Y.
          However this new API is not backward compatible with older
          clients. If you really need to run the old Coda userspace
          cache manager then say Y.

-         
+

          For most cases you probably want to say N.
 
 config AFS_FS
          For most cases you probably want to say N.
 
 config AFS_FS


@@ -2130,4 +2136,3 @@ source "fs/nls/Kconfig"
 source "fs/dlm/Kconfig"
 
 endmenu
 source "fs/dlm/Kconfig"
 
 endmenu

-