regression: disable timer peek-ahead for 2.6.28

[linux-2.6-omap-h63xx.git] / Documentation / aoe / aoe.txt

diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 43e50108d0e21c56ec5bcd873916c9f547a765c8..3a4dbe4663c9556f15fd062cfafcd1f6e3dddd1d 100644 (file)
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -4,6 +4,16 @@ The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
   It has many tips and hints!
 
+The aoetools are userland programs that are designed to work with this
+driver.  The aoetools are on sourceforge.
+
+  http://aoetools.sourceforge.net/
+
+The scripts in this Documentation/aoe directory are intended to
+document the use of the driver and are not necessary if you install
+the aoetools.
+
+
 CREATING DEVICE NODES
 
   Users of udev should find the block device nodes created
@@ -35,14 +45,15 @@ USING DEVICE NODES
 
   "echo eth2 eth4 > /dev/etherd/interfaces" tells the aoe driver to
   limit ATA over Ethernet traffic to eth2 and eth4.  AoE traffic from
-  untrusted networks should be ignored as a matter of security.
+  untrusted networks should be ignored as a matter of security.  See
+  also the aoe_iflist driver option described below.
 
   "echo > /dev/etherd/discover" tells the driver to find out what AoE
   devices are available.
 
   These character devices may disappear and be replaced by sysfs
-  counterparts, so distribution maintainers are encouraged to create
-  scripts that use these devices.
+  counterparts.  Using the commands in aoetools insulates users from
+  these implementation details.
 
   The block devices are named like this:
 
@@ -66,7 +77,8 @@ USING SYSFS
   through which we are communicating with the remote AoE device.
 
   There is a script in this directory that formats this information
-  in a convenient way.
+  in a convenient way.  Users with aoetools can use the aoe-stat
+  command.
 
   root@makki root# sh Documentation/aoe/status.sh 
      e10.0            eth3              up
@@ -89,3 +101,23 @@ USING SYSFS
       e4.7            eth1              up
       e4.8            eth1              up
       e4.9            eth1              up
+
+  Use /sys/module/aoe/parameters/aoe_iflist (or better, the driver
+  option discussed below) instead of /dev/etherd/interfaces to limit
+  AoE traffic to the network interfaces in the given
+  whitespace-separated list.  Unlike the old character device, the
+  sysfs entry can be read from as well as written to.
+
+  It's helpful to trigger discovery after setting the list of allowed
+  interfaces.  The aoetools package provides an aoe-discover script
+  for this purpose.  You can also directly use the
+  /dev/etherd/discover special file described above.
+
+DRIVER OPTIONS
+
+  There is a boot option for the built-in aoe driver and a
+  corresponding module parameter, aoe_iflist.  Without this option,
+  all network interfaces may be used for ATA over Ethernet.  Here is a
+  usage example for the module parameter.
+
+    modprobe aoe_iflist="eth1 eth3"