Note that this is actually an internal clock divisor, which
affects the measurable speed range, not the read value.
+fan[1-*]_target
+ Desired fan speed
+ Unit: revolution/min (RPM)
+ RW
+ Only makes sense if the chip supports closed-loop fan speed
+ control based on the measured fan speed.
+
Also see the Alarms section for status flags associated with fans.
pwm[1-*]_enable
Switch PWM on and off.
- Not always present even if fan*_pwm is.
+ Not always present even if pwmN is.
0: turn off
1: turn on in manual mode
2+: turn on in automatic mode
- Check individual chip documentation files for automatic mode details.
+ Check individual chip documentation files for automatic mode
+ details.
+ RW
+
+pwm[1-*]_mode 0: DC mode (direct current)
+ 1: PWM mode (pulse-width modulation)
RW
-pwm[1-*]_mode
- 0: DC mode
- 1: PWM mode
+pwm[1-*]_freq Base PWM frequency in Hz.
+ Only possibly available when pwmN_mode is PWM, but not always
+ present even then.
RW
pwm[1-*]_auto_channels_temp