Phonet: Simple doc fix.

[linux-2.6-omap-h63xx.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e7bea3e853044e54f3ee863ad3d295b0df84a522..2ca9c8f8c8d8020d73402d7dbaeb3cdfe204ea68 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -284,6 +284,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        isolate - enable device isolation (each device, as far
                                  as possible, will get its own protection
                                  domain)
+                       fullflush - enable flushing of IO/TLB entries when
+                                   they are unmapped. Otherwise they are
+                                   flushed before they will be reused, which
+                                   is a lot of faster
+
        amd_iommu_size= [HW,X86-64]
                        Define the size of the aperture for the AMD IOMMU
                        driver. Possible values are:
@@ -365,6 +370,8 @@ and is between 256 and 4096 characters. It is defined in the file
                        no delay (0).
                        Format: integer
 
+       bootmem_debug   [KNL] Enable bootmem allocator debug messages.
+
        bttv.card=      [HW,V4L] bttv (bt848 + bt878 based grabber cards)
        bttv.radio=     Most important insmod options are available as
                        kernel args too.
@@ -461,12 +468,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        Range: 0 - 8192
                        Default: 64
 
-       disable_8254_timer
-       enable_8254_timer
-                       [IA32/X86_64] Disable/Enable interrupt 0 timer routing
-                       over the 8254 in addition to over the IO-APIC. The
-                       kernel tries to set a sensible default.
-
        hpet=           [X86-32,HPET] option to control HPET usage
                        Format: { enable (default) | disable | force }
                        disable: disable HPET and use PIT instead
@@ -1018,6 +1019,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        (only serial suported for now)
                        Format: <serial_device>[,baud]
 
+       kmac=           [MIPS] korina ethernet MAC address.
+                       Configure the RouterBoard 532 series on-chip
+                       Ethernet adapter MAC address.
+
        l2cr=           [PPC]
 
        l3cr=           [PPC]
@@ -1072,6 +1077,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
                        * [no]ncq: Turn on or off NCQ.
 
+                       * nohrst, nosrst, norst: suppress hard, soft
+                          and both resets.
+
                        If there are multiple matching configurations changing
                        the same attribute, the last one is used.
 
@@ -1877,6 +1885,12 @@ and is between 256 and 4096 characters. It is defined in the file
        shapers=        [NET]
                        Maximal number of shapers.
 
+       show_msr=       [x86] show boot-time MSR settings
+                       Format: { <integer> }
+                       Show boot-time (BIOS-initialized) MSR settings.
+                       The parameter means the number of CPUs to show,
+                       for example 1 means boot CPU only.
+
        sim710=         [SCSI,HW]
                        See header of drivers/scsi/sim710.c.