ALSA ALSA sound support is enabled.
APIC APIC support is enabled.
APM Advanced Power Management support is enabled.
+ AVR32 AVR32 architecture is enabled.
AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled.
DRM Direct Rendering Management support is enabled.
configured. Potentially dangerous and should only be
used if you are entirely sure of the consequences.
- chandev= [HW,NET] Generic channel device initialisation
+ ccw_timeout_log [S390]
+ See Documentation/s390/CommonIO for details.
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
Value can be changed at runtime via
/selinux/checkreqprot.
+ cio_ignore= [S390]
+ See Documentation/s390/CommonIO for details.
+
+ cio_msg= [S390]
+ See Documentation/s390/CommonIO for details.
+
clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
[Deprecated]
Forces specified clocksource (if available) to be used
[SPARC64] tick
[X86-64] hpet,tsc
- code_bytes [IA32] How many bytes of object code to print in an
- oops report.
+ code_bytes [IA32/X86_64] How many bytes of object code to print
+ in an oops report.
Range: 0 - 8192
Default: 64
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
- default_blu= [VT]
+ vt.default_blu= [VT]
Format: <blue0>,<blue1>,<blue2>,...,<blue15>
Change the default blue palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
- default_grn= [VT]
+ vt.default_grn= [VT]
Format: <green0>,<green1>,<green2>,...,<green15>
Change the default green palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
- default_red= [VT]
+ vt.default_red= [VT]
Format: <red0>,<red1>,<red2>,...,<red15>
Change the default red palette of the console.
This is a 16-member array composed of values
ranging from 0-255.
- default_utf8= [VT]
+ vt.default_utf8=
+ [VT]
Format=<0|1>
Set system-wide default UTF-8 mode for all tty's.
- Default is 0 and by setting to 1, it enables UTF-8
- mode for all newly opened or allocated terminals.
+ Default is 1, i.e. UTF-8 mode is enabled for all
+ newly opened terminals.
dhash_entries= [KNL]
Set number of hash buckets for dentry cache.
eata= [HW,SCSI]
- ec_intr= [HW,ACPI] ACPI Embedded Controller interrupt mode
- Format: <int>
- 0: polling mode
- non-0: interrupt mode (default)
-
edd= [EDD]
Format: {"of[f]" | "sk[ipmbr]"}
See comment in arch/i386/boot/edd.S
for translation below 32 bit and if not available
then look in the higher range.
+ io_delay= [X86-32,X86-64] I/O delay method
+ 0x80
+ Standard port 0x80 based delay
+ 0xed
+ Alternate port 0xed based delay (needed on some systems)
+ udelay
+ Simple two microseconds delay
+ none
+ No delay
+
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer in
C2 power state.
+ libata.dma= [LIBATA] DMA control
+ libata.dma=0 Disable all PATA and SATA DMA
+ libata.dma=1 PATA and SATA Disk DMA only
+ libata.dma=2 ATAPI (CDROM) DMA only
+ libata.dma=4 Compact Flash DMA only
+ Combinations also work, so libata.dma=3 enables DMA
+ for disks and CDROMs, but not CFs.
+
libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
when set.
Format: <int>
of returning the full 64-bit number.
The default is to return 64-bit inode numbers.
+ nmi_debug= [KNL,AVR32] Specify one or more actions to take
+ when a NMI is triggered.
+ Format: [state][,regs][,debounce][,die]
+
nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+ noefi [X86-32,X86-64] Disable EFI runtime services support.
+
noexec [IA-64]
noexec [X86-32,X86-64]
Format: <vendor>:<model>:<flags>
(flags are integer value)
- scsi_logging= [SCSI]
+ scsi_logging_level= [SCSI] a bit mask of logging levels
+ See drivers/scsi/scsi_logging.h for bits. Also
+ settable via sysctl at dev.scsi.logging_level
+ (/proc/sys/dev/scsi/logging_level).
+ There is also a nice 'scsi_logging_level' script in the
+ S390-tools package, available for download at
+ http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
discovered. async scans them in kernel threads,
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
+ vdso32= [X86-32,X86-64]
+ vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
+ vdso32=1: enable 32-bit VDSO (default)
+ vdso32=0: disable 32-bit VDSO mapping
+
vector= [IA-64,SMP]
vector=percpu: enable percpu vector domain