oom: move prototypes to appropriate header file

[linux-2.6-omap-h63xx.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9cbc82e37ed083ab24e8a62f5c95429db7db33f1..eb247997f6791fa535b0bcec101cfa658634d3ba 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -349,6 +349,11 @@ and is between 256 and 4096 characters. It is defined in the file
        blkmtd_bs=
        blkmtd_count=
 
+       boot_delay=     Milliseconds to delay each printk during boot.
+                       Values larger than 10 seconds (10000) are changed to
+                       no delay (0).
+                       Format: integer
+
        bttv.card=      [HW,V4L] bttv (bt848 + bt878 based grabber cards)
        bttv.radio=     Most important insmod options are available as
                        kernel args too.
@@ -865,6 +870,10 @@ and is between 256 and 4096 characters. It is defined in the file
        lasi=           [HW,SCSI] PARISC LASI driver for the 53c700 chip
                        Format: addr:<io>,irq:<irq>
 
+       libata.noacpi   [LIBATA] Disables use of ACPI in libata suspend/resume
+                       when set.
+                       Format: <int>
+
        load_ramdisk=   [RAM] List of ramdisks to load from floppy
                        See Documentation/ramdisk.txt.
 
@@ -902,6 +911,11 @@ and is between 256 and 4096 characters. It is defined in the file
                        n must be a power of two.  The default size
                        is set in the kernel config file.
 
+       logo.nologo     [FB] Disables display of the built-in Linux logo.
+                       This may be used to provide more screen space for
+                       kernel log messages and is useful when debugging
+                       kernel boot problems.
+
        lp=0            [LP]    Specify parallel ports to use, e.g,
        lp=port[,port...]       lp=none,parport0 (lp0 not configured, lp1 uses
        lp=reset                first parallel port). 'lp=0' disables the
@@ -1079,16 +1093,19 @@ and is between 256 and 4096 characters. It is defined in the file
                        [NFS] set the maximum lifetime for idmapper cache
                        entries.
 
+       nfs.enable_ino64=
+                       [NFS] enable 64-bit inode numbers.
+                       If zero, the NFS client will fake up a 32-bit inode
+                       number for the readdir() and stat() syscalls instead
+                       of returning the full 64-bit number.
+                       The default is to return 64-bit inode numbers.
+
        nmi_watchdog=   [KNL,BUGS=X86-32] Debugging features for SMP kernels
 
        no387           [BUGS=X86-32] Tells the kernel to use the 387 maths
                        emulation library even if a 387 maths coprocessor
                        is present.
 
-       noacpi          [LIBATA] Disables use of ACPI in libata suspend/resume
-                       when set.
-                       Format: <int>
-
        noaliencache    [MM, NUMA, SLAB] Disables the allocation of alien
                        caches in the slab allocator.  Saves per-node memory,
                        but will impact performance.
@@ -1883,9 +1900,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format:
                        <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
-       tsdev.xres=     [TS] Horizontal screen resolution.
-       tsdev.yres=     [TS] Vertical screen resolution.
-
        turbografx.map[2|3]=    [HW,JOY]
                        TurboGraFX parallel port interface
                        Format: