hwmon: (abituguru3) Cosmetic whitespace fixes

[linux-2.6-omap-h63xx.git] / Documentation / power / s2ram.txt

diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.txt
index b05f512130eaa1cb3f75da9414cf65d80cfe5b62..2ebdc6091ce17ff6464aeb4cec35939983045de6 100644 (file)
--- a/Documentation/power/s2ram.txt
+++ b/Documentation/power/s2ram.txt
@@ -54,3 +54,21 @@ used to run with "radeonfb" (it's an ATI Radeon mobility). It turns out
 that "radeonfb" simply cannot resume that device - it tries to set the
 PLL's, and it just _hangs_. Using the regular VGA console and letting X
 resume it instead works fine.
+
+NOTE
+====
+pm_trace uses the system's Real Time Clock (RTC) to save the magic number.
+Reason for this is that the RTC is the only reliably available piece of
+hardware during resume operations where a value can be set that will
+survive a reboot.
+
+Consequence is that after a resume (even if it is successful) your system
+clock will have a value corresponding to the magic mumber instead of the
+correct date/time! It is therefore advisable to use a program like ntp-date
+or rdate to reset the correct date/time from an external time source when
+using this trace option.
+
+As the clock keeps ticking it is also essential that the reboot is done
+quickly after the resume failure. The trace option does not use the seconds
+or the low order bits of the minutes of the RTC, but a too long delay will
+corrupt the magic value.