Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6

[linux-2.6-omap-h63xx.git] / Documentation / spi / pxa2xx

diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index f9717fe9bd85296c8ae892003f70f013262a5fb1..bbe8dee681a5d2b9a503d7f59b22e79d7a3e9014 100644 (file)
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -1,4 +1,4 @@
-PXA2xx SPI on SSP driver HOWTO
+PXA2xx SPI on SSP driver HOWTO
 ===================================================
 This a mini howto on the pxa2xx_spi driver.  The driver turns a PXA2xx
 synchronous serial port into a SPI master controller
@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
        enum pxa_ssp_type ssp_type;
@@ -62,7 +62,7 @@ static struct resource pxa_spi_nssp_resources[] = {
 
 static struct pxa2xx_spi_master pxa_nssp_master_info = {
        .ssp_type = PXA25x_NSSP, /* Type of SSP */
-       .clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+       .clock_enable = CKEN_NSSP, /* NSSP Peripheral clock */
        .num_chipselect = 1, /* Matches the number of chips attached to NSSP */
        .enable_dma = 1, /* Enables NSSP DMA */
 };
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device.