write_inode_now(): avoid unnecessary synchronous write

[linux-2.6-omap-h63xx.git] / Documentation / thinkpad-acpi.txt

diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt
index 7c7bd4720cfc4fc2b71830b06c788249cbc859cc..6c2477754a2a35025e8c837740693275d2df8f21 100644 (file)
--- a/Documentation/thinkpad-acpi.txt
+++ b/Documentation/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
                     ThinkPad ACPI Extras Driver
 
-                            Version 0.18
-                         October 08th, 2007
+                            Version 0.19
+                         January 06th, 2008
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -311,6 +311,8 @@ sysfs notes:
                disabled" postition, and 1 if the switch is in the
                "radios enabled" position.
 
+               This attribute has poll()/select() support.
+
        hotkey_report_mode:
                Returns the state of the procfs ACPI event report mode
                filter for hot keys.  If it is set to 1 (the default),
@@ -325,6 +327,25 @@ sysfs notes:
                May return -EPERM (write access locked out by module
                parameter) or -EACCES (read-only).
 
+       wakeup_reason:
+               Set to 1 if the system is waking up because the user
+               requested a bay ejection.  Set to 2 if the system is
+               waking up because the user requested the system to
+               undock.  Set to zero for normal wake-ups or wake-ups
+               due to unknown reasons.
+
+               This attribute has poll()/select() support.
+
+       wakeup_hotunplug_complete:
+               Set to 1 if the system was waken up because of an
+               undock or bay ejection request, and that request
+               was sucessfully completed.  At this point, it might
+               be useful to send the system back to sleep, at the
+               user's choice.  Refer to HKEY events 0x4003 and
+               0x3003, below.
+
+               This attribute has poll()/select() support.
+
 input layer notes:
 
 A Hot key is mapped to a single input layer EV_KEY event, possibly
@@ -475,6 +496,23 @@ Non hot-key ACPI HKEY event map:
 The above events are not propagated by the driver, except for legacy
 compatibility purposes when hotkey_report_mode is set to 1.
 
+0x2304         System is waking up from suspend to undock
+0x2305         System is waking up from suspend to eject bay
+0x2404         System is waking up from hibernation to undock
+0x2405         System is waking up from hibernation to eject bay
+
+The above events are never propagated by the driver.
+
+0x3003         Bay ejection (see 0x2x05) complete, can sleep again
+0x4003         Undocked (see 0x2x04), can sleep again
+0x5009         Tablet swivel: switched to tablet mode
+0x500A         Tablet swivel: switched to normal mode
+0x500B         Tablet pen insterted into its storage bay
+0x500C         Tablet pen removed from its storage bay
+0x5010         Brightness level changed (newer Lenovo BIOSes)
+
+The above events are propagated by the driver.
+
 Compatibility notes:
 
 ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
@@ -1322,3 +1360,6 @@ Sysfs interface changelog:
                NVRAM polling patch).  Some development snapshots of
                0.18 had an earlier version that did strange things
                to hotkey_mask.
+
+0x020200:      Add poll()/select() support to the following attributes:
+               hotkey_radio_sw, wakeup_hotunplug_complete, wakeup_reason