[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme

[linux-2.6-omap-h63xx.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a25697be5fe9d1506c972cdc4a40ce2d16c9b584..4ea3d9e97f7f7b8a5b6a286ce9f77fc7704377e7 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -318,6 +318,9 @@ config ARCH_KS8695
 
 config ARCH_NS9XXX
        bool "NetSilicon NS9xxx"
+       select GENERIC_GPIO
+       select GENERIC_TIME
+       select GENERIC_CLOCKEVENTS
        help
          Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
          System.
@@ -342,6 +345,7 @@ config ARCH_PXA
        select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
+       select TICK_ONESHOT
        help
          Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -534,7 +538,7 @@ config ISA_DMA_API
        bool
 
 config PCI
-       bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
+       bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE
        help
          Find out whether you have a PCI motherboard. PCI is the name of a
          bus system, i.e. the way the CPU talks to the other stuff inside
@@ -555,6 +559,12 @@ config PCI_HOST_VIA82C505
        depends on PCI && ARCH_SHARK
        default y
 
+config PCI_HOST_ITE8152
+       bool
+       depends on PCI && MACH_ARMCORE
+       default y
+       select DMABOUNCE
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
@@ -848,7 +858,7 @@ config KEXEC
        help
          kexec is a system call that implements the ability to shutdown your
          current kernel, and to start another kernel.  It is like a reboot
-         but it is indepedent of the system firmware.   And like a reboot
+         but it is independent of the system firmware.   And like a reboot
          you can start any kernel with it, not just Linux.
 
          It is an ongoing process to be certain the hardware in a machine
@@ -858,7 +868,7 @@ config KEXEC
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
 
 menu "CPU Frequency scaling"
 
@@ -894,6 +904,12 @@ config CPU_FREQ_IMX
 
          If in doubt, say N.
 
+config CPU_FREQ_PXA
+       bool
+       depends on CPU_FREQ && ARCH_PXA && PXA25x
+       default y
+       select CPU_FREQ_DEFAULT_GOV_USERSPACE
+
 endmenu
 
 endif
@@ -994,6 +1010,10 @@ source "drivers/pnp/Kconfig"
 
 source "drivers/block/Kconfig"
 
+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
+
+source "drivers/misc/Kconfig"
+
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
        || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
        || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
@@ -1029,15 +1049,17 @@ source "drivers/spi/Kconfig"
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
-#source "drivers/l3/Kconfig"
+source "drivers/watchdog/Kconfig"
 
-source "drivers/misc/Kconfig"
+source "drivers/ssb/Kconfig"
 
-source "drivers/mfd/Kconfig"
+#source "drivers/l3/Kconfig"
 
-source "drivers/leds/Kconfig"
+source "drivers/mfd/Kconfig"
 
 source "drivers/media/Kconfig"
 
@@ -1051,15 +1073,19 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/leds/Kconfig"
+
 source "drivers/rtc/Kconfig"
 
 source "drivers/dma/Kconfig"
 
+source "drivers/dca/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
 
-source "arch/arm/oprofile/Kconfig"
+source "arch/arm/Kconfig.instrumentation"
 
 source "arch/arm/Kconfig.debug"