ALSA: hda - check page continuity

[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / board-cap9adk.c

diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index a1c41d7c0be95bb243458d7d6df736ddabdef4ee..196199552eb6dbe18d079840994decf522fa37a5 100644 (file)
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -188,7 +188,7 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 //     .rdy_pin        = ... not connected
        .enable_pin     = AT91_PIN_PD15,
        .partition_info = nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
        .bus_width_16   = 1,
 #else
        .bus_width_16   = 0,
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
        /* Serial */
        at91_add_device_serial();
        /* USB Host */
-       set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+       set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_usbh(&cap9adk_usbh_data);
        /* USB HS */
-       set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+       set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_usba(&cap9adk_usba_udc_data);
        /* SPI */
        at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
        /* I2C */
        at91_add_device_i2c(NULL, 0);
        /* LCD Controller */
-       set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+       set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
        at91_add_device_lcdc(&cap9adk_lcdc_data);
        /* AC97 */
        at91_add_device_ac97(&cap9adk_ac97_data);