[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

[linux-2.6-omap-h63xx.git] / arch / arm / mach-at91 / include / mach / at91cap9_ddrsdr.h

diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
new file mode 100644 (file)
index 0000000..bca878f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR                (AT91_DDRSDRC + 0x00)   /* Mode Register */
+#define                AT91_DDRSDRC_MODE       (0xf << 0)              /* Command Mode */
+#define                        AT91_DDRSDRC_MODE_NORMAL                0
+#define                        AT91_DDRSDRC_MODE_NOP           1
+#define                        AT91_DDRSDRC_MODE_PRECHARGE     2
+#define                        AT91_DDRSDRC_MODE_LMR           3
+#define                        AT91_DDRSDRC_MODE_REFRESH       4
+#define                        AT91_DDRSDRC_MODE_EXT_LMR       5
+#define                        AT91_DDRSDRC_MODE_DEEP          6
+
+#define AT91_DDRSDRC_RTR       (AT91_DDRSDRC + 0x04)   /* Refresh Timer Register */
+#define                AT91_DDRSDRC_COUNT      (0xfff << 0)            /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR                (AT91_DDRSDRC + 0x08)   /* Configuration Register */
+#define                AT91_DDRSDRC_NC         (3 << 0)                /* Number of Column Bits */
+#define                        AT91_DDRSDRC_NC_SDR8    (0 << 0)
+#define                        AT91_DDRSDRC_NC_SDR9    (1 << 0)
+#define                        AT91_DDRSDRC_NC_SDR10   (2 << 0)
+#define                        AT91_DDRSDRC_NC_SDR11   (3 << 0)
+#define                        AT91_DDRSDRC_NC_DDR9    (0 << 0)
+#define                        AT91_DDRSDRC_NC_DDR10   (1 << 0)
+#define                        AT91_DDRSDRC_NC_DDR11   (2 << 0)
+#define                        AT91_DDRSDRC_NC_DDR12   (3 << 0)
+#define                AT91_DDRSDRC_NR         (3 << 2)                /* Number of Row Bits */
+#define                        AT91_DDRSDRC_NR_11      (0 << 2)
+#define                        AT91_DDRSDRC_NR_12      (1 << 2)
+#define                        AT91_DDRSDRC_NR_13      (2 << 2)
+#define                AT91_DDRSDRC_CAS        (7 << 4)                /* CAS Latency */
+#define                        AT91_DDRSDRC_CAS_2      (2 << 4)
+#define                        AT91_DDRSDRC_CAS_3      (3 << 4)
+#define                        AT91_DDRSDRC_CAS_25     (6 << 4)
+#define                AT91_DDRSDRC_DLL        (1 << 7)                /* Reset DLL */
+#define                AT91_DDRSDRC_DICDS      (1 << 8)                /* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR      (AT91_DDRSDRC + 0x0C)   /* Timing 0 Register */
+#define                AT91_DDRSDRC_TRAS       (0xf <<  0)             /* Active to Precharge delay */
+#define                AT91_DDRSDRC_TRCD       (0xf <<  4)             /* Row to Column delay */
+#define                AT91_DDRSDRC_TWR        (0xf <<  8)             /* Write recovery delay */
+#define                AT91_DDRSDRC_TRC        (0xf << 12)             /* Row cycle delay */
+#define                AT91_DDRSDRC_TRP        (0xf << 16)             /* Row precharge delay */
+#define                AT91_DDRSDRC_TRRD       (0xf << 20)             /* Active BankA to BankB */
+#define                AT91_DDRSDRC_TWTR       (1   << 24)             /* Internal Write to Read delay */
+#define                AT91_DDRSDRC_TMRD       (0xf << 28)             /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR      (AT91_DDRSDRC + 0x10)   /* Timing 1 Register */
+#define                AT91_DDRSDRC_TRFC       (0x1f << 0)             /* Row Cycle Delay */
+#define                AT91_DDRSDRC_TXSNR      (0xff << 8)             /* Exit self-refresh to non-read */
+#define                AT91_DDRSDRC_TXSRD      (0xff << 16)            /* Exit self-refresh to read */
+#define                AT91_DDRSDRC_TXP        (0xf  << 24)            /* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR       (AT91_DDRSDRC + 0x18)   /* Low Power Register */
+#define                AT91_DDRSDRC_LPCB               (3 << 0)        /* Low-power Configurations */
+#define                        AT91_DDRSDRC_LPCB_DISABLE               0
+#define                        AT91_DDRSDRC_LPCB_SELF_REFRESH          1
+#define                        AT91_DDRSDRC_LPCB_POWER_DOWN            2
+#define                        AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN       3
+#define                AT91_DDRSDRC_CLKFR              (1 << 2)        /* Clock Frozen */
+#define                AT91_DDRSDRC_PASR               (7 << 4)        /* Partial Array Self Refresh */
+#define                AT91_DDRSDRC_TCSR               (3 << 8)        /* Temperature Compensated Self Refresh */
+#define                AT91_DDRSDRC_DS                 (3 << 10)       /* Drive Strength */
+#define                AT91_DDRSDRC_TIMEOUT            (3 << 12)       /* Time to define when Low Power Mode is enabled */
+#define                        AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES       (0 << 12)
+#define                        AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES      (1 << 12)
+#define                        AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES     (2 << 12)
+
+#define AT91_DDRSDRC_MDR       (AT91_DDRSDRC + 0x1C)   /* Memory Device Register */
+#define                AT91_DDRSDRC_MD         (3 << 0)                /* Memory Device Type */
+#define                        AT91_DDRSDRC_MD_SDR             0
+#define                        AT91_DDRSDRC_MD_LOW_POWER_SDR   1
+#define                        AT91_DDRSDRC_MD_DDR             2
+#define                        AT91_DDRSDRC_MD_LOW_POWER_DDR   3
+
+#define AT91_DDRSDRC_DLLR      (AT91_DDRSDRC + 0x20)   /* DLL Information Register */
+#define                AT91_DDRSDRC_MDINC      (1 << 0)                /* Master Delay increment */
+#define                AT91_DDRSDRC_MDDEC      (1 << 1)                /* Master Delay decrement */
+#define                AT91_DDRSDRC_MDOVF      (1 << 2)                /* Master Delay Overflow */
+#define                AT91_DDRSDRC_SDCOVF     (1 << 3)                /* Slave Delay Correction Overflow */
+#define                AT91_DDRSDRC_SDCUDF     (1 << 4)                /* Slave Delay Correction Underflow */
+#define                AT91_DDRSDRC_SDERF      (1 << 5)                /* Slave Delay Correction error */
+#define                AT91_DDRSDRC_MDVAL      (0xff <<  8)            /* Master Delay value */
+#define                AT91_DDRSDRC_SDVAL      (0xff << 16)            /* Slave Delay value */
+#define                AT91_DDRSDRC_SDCVAL     (0xff << 24)            /* Slave Delay Correction value */
+
+
+#endif