Merge branch 'for-rmk' of git://git.pengutronix.de/git/ukl/linux-2.6 into devel

[linux-2.6-omap-h63xx.git] / arch / arm / mach-ep93xx / micro9.c

diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index c2197236b63285190d99bcd0fa80225b84e67eac..15d6815d78c412b030f7d50a9b9de27de87de7cc 100644 (file)
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
@@ -25,7 +26,7 @@
 #include <asm/mach-types.h>
 
 static struct ep93xx_eth_data micro9_eth_data = {
-       .phy_id                 = 0x1f,
+       .phy_id         = 0x1f,
 };
 
 static void __init micro9_init(void)
@@ -38,46 +39,46 @@ static void __init micro9_init(void)
  */
 #ifdef CONFIG_MACH_MICRO9H
 static struct physmap_flash_data micro9h_flash_data = {
-       .width          = 4,
+       .width          = 4,
 };
 
 static struct resource micro9h_flash_resource = {
-       .start          = 0x10000000,
-       .end            = 0x13ffffff,
-       .flags          = IORESOURCE_MEM,
+       .start          = EP93XX_CS1_PHYS_BASE,
+       .end            = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
+       .flags          = IORESOURCE_MEM,
 };
 
 static struct platform_device micro9h_flash = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev            = {
-               .platform_data  = &micro9h_flash_data,
-       },
-       .num_resources  = 1,
-       .resource       = &micro9h_flash_resource,
+       .name           = "physmap-flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data  = &micro9h_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &micro9h_flash_resource,
 };
 
 static void __init micro9h_init(void)
 {
-       platform_device_register(&micro9h_flash);
+       platform_device_register(&micro9h_flash);
 }
 
 static void __init micro9h_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
-       micro9h_init();
+       ep93xx_init_devices();
+       micro9_init();
+       micro9h_init();
 }
 
 MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9h_init_machine,
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9h_init_machine,
 MACHINE_END
 #endif
 
@@ -87,19 +88,19 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 static void __init micro9m_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
+       ep93xx_init_devices();
+       micro9_init();
 }
 
 MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9m_init_machine,
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9m_init_machine,
 MACHINE_END
 #endif
 
@@ -109,19 +110,19 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 static void __init micro9l_init_machine(void)
 {
-       ep93xx_init_devices();
-       micro9_init();
+       ep93xx_init_devices();
+       micro9_init();
 }
 
 MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
-       .phys_io        = EP93XX_APB_PHYS_BASE,
-       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-       .boot_params    = 0x00000100,
-       .map_io         = ep93xx_map_io,
-       .init_irq       = ep93xx_init_irq,
-       .timer          = &ep93xx_timer,
-       .init_machine   = micro9l_init_machine,
+       /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+       .phys_io        = EP93XX_APB_PHYS_BASE,
+       .io_pg_offst    = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+       .map_io         = ep93xx_map_io,
+       .init_irq       = ep93xx_init_irq,
+       .timer          = &ep93xx_timer,
+       .init_machine   = micro9l_init_machine,
 MACHINE_END
 #endif