]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - arch/arm/mach-ixp4xx/ixdp425-setup.c
Merge branch 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm
[linux-2.6-omap-h63xx.git] / arch / arm / mach-ixp4xx / ixdp425-setup.c
index ec4f07950ec62745b300ae45e12c965434510048..9b2d2ec14c8067153ae7e2741f8af05cf590e42c 100644 (file)
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/delay.h>
 
 static struct flash_platform_data ixdp425_flash_data = {
        .map_name       = "cfi_probe",
@@ -44,18 +50,88 @@ static struct platform_device ixdp425_flash = {
        .resource       = &ixdp425_flash_resource,
 };
 
-static struct ixp4xx_i2c_pins ixdp425_i2c_gpio_pins = {
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition ixdp425_partitions[] = {
+       {
+               .name   = "ixp400 NAND FS 0",
+               .offset = 0,
+               .size   = SZ_8M
+       }, {
+               .name   = "ixp400 NAND FS 1",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = MTDPART_SIZ_FULL
+       },
+};
+#endif
+
+static void
+ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+       struct nand_chip *this = mtd->priv;
+       int offset = (int)this->priv;
+
+       if (ctrl & NAND_CTRL_CHANGE) {
+               if (ctrl & NAND_NCE) {
+                       gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_LOW);
+                       udelay(5);
+               } else
+                       gpio_line_set(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_HIGH);
+
+               offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
+               offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
+               this->priv = (void *)offset;
+       }
+
+       if (cmd != NAND_CMD_NONE)
+               writeb(cmd, this->IO_ADDR_W + offset);
+}
+
+static struct platform_nand_data ixdp425_flash_nand_data = {
+       .chip = {
+               .chip_delay             = 30,
+               .options                = NAND_NO_AUTOINCR,
+#ifdef CONFIG_MTD_PARTITIONS
+               .part_probe_types       = part_probes,
+               .partitions             = ixdp425_partitions,
+               .nr_partitions          = ARRAY_SIZE(ixdp425_partitions),
+#endif
+       },
+       .ctrl = {
+               .cmd_ctrl               = ixdp425_flash_nand_cmd_ctrl
+       }
+};
+
+static struct resource ixdp425_flash_nand_resource = {
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device ixdp425_flash_nand = {
+       .name           = "gen_nand",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &ixdp425_flash_nand_data,
+       },
+       .num_resources  = 1,
+       .resource       = &ixdp425_flash_nand_resource,
+};
+#endif /* CONFIG_MTD_NAND_PLATFORM */
+
+static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
        .sda_pin        = IXDP425_SDA_PIN,
        .scl_pin        = IXDP425_SCL_PIN,
 };
 
-static struct platform_device ixdp425_i2c_controller = {
-       .name           = "IXP4XX-I2C",
+static struct platform_device ixdp425_i2c_gpio = {
+       .name           = "i2c-gpio",
        .id             = 0,
-       .dev            = {
-               .platform_data = &ixdp425_i2c_gpio_pins,
+       .dev     = {
+               .platform_data  = &ixdp425_i2c_gpio_data,
        },
-       .num_resources  = 0
 };
 
 static struct resource ixdp425_uart_resources[] = {
@@ -101,10 +177,41 @@ static struct platform_device ixdp425_uart = {
        .resource               = ixdp425_uart_resources
 };
 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+       {
+               .phy            = 0,
+               .rxq            = 3,
+               .txreadyq       = 20,
+       }, {
+               .phy            = 1,
+               .rxq            = 4,
+               .txreadyq       = 21,
+       }
+};
+
+static struct platform_device ixdp425_eth[] = {
+       {
+               .name                   = "ixp4xx_eth",
+               .id                     = IXP4XX_ETH_NPEB,
+               .dev.platform_data      = ixdp425_plat_eth,
+       }, {
+               .name                   = "ixp4xx_eth",
+               .id                     = IXP4XX_ETH_NPEC,
+               .dev.platform_data      = ixdp425_plat_eth + 1,
+       }
+};
+
 static struct platform_device *ixdp425_devices[] __initdata = {
-       &ixdp425_i2c_controller,
+       &ixdp425_i2c_gpio,
        &ixdp425_flash,
-       &ixdp425_uart
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+       &ixdp425_flash_nand,
+#endif
+       &ixdp425_uart,
+       &ixdp425_eth[0],
+       &ixdp425_eth[1],
 };
 
 static void __init ixdp425_init(void)
@@ -115,6 +222,22 @@ static void __init ixdp425_init(void)
        ixdp425_flash_resource.end =
                IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+    defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+       ixdp425_flash_nand_resource.start = IXP4XX_EXP_BUS_BASE(3),
+       ixdp425_flash_nand_resource.end   = IXP4XX_EXP_BUS_BASE(3) + 0x10 - 1;
+
+       gpio_line_config(IXDP425_NAND_NCE_PIN, IXP4XX_GPIO_OUT);
+
+       /* Configure expansion bus for NAND Flash */
+       *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN |
+                         IXP4XX_EXP_BUS_STROBE_T(1) |  /* extend by 1 clock */
+                         IXP4XX_EXP_BUS_CYCLES(0) |    /* Intel cycles */
+                         IXP4XX_EXP_BUS_SIZE(0) |      /* 512bytes addr space*/
+                         IXP4XX_EXP_BUS_WR_EN |
+                         IXP4XX_EXP_BUS_BYTE_EN;       /* 8 bit data bus */
+#endif
+
        if (cpu_is_ixp43x()) {
                ixdp425_uart.num_resources = 1;
                ixdp425_uart_data[1].flags = 0;